]> git.ipfire.org Git - thirdparty/linux.git/commitdiff
spi: sh-msiof: Fix maximum DMA transfer size
authorGeert Uytterhoeven <geert+renesas@glider.be>
Fri, 16 May 2025 13:32:06 +0000 (15:32 +0200)
committerMark Brown <broonie@kernel.org>
Mon, 19 May 2025 10:55:20 +0000 (11:55 +0100)
The maximum amount of data to transfer in a single DMA request is
calculated from the FIFO sizes (which is technically not 100% correct,
but a simplification, as it is limited by the maximum word count values
in the Transmit and Control Data Registers).  However, in case there is
both data to transmit and to receive, the transmit limit is overwritten
by the receive limit.

Fix this by using the minimum applicable FIFO size instead.  Move the
calculation outside the loop, so it is not repeated for each individual
DMA transfer.

As currently tx_fifo_size is always equal to rx_fifo_size, this bug had
no real impact.

Fixes: fe78d0b7691c0274 ("spi: sh-msiof: Fix FIFO size to 64 word from 256 word")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/d9961767a97758b2614f2ee8afe1bd56dc900a60.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/spi/spi-sh-msiof.c

index 15e42af35f7e4230d131b67a41d644ebc6351a24..cf93c2ca821f84faf1ed0c19f7a56d47bf32fec0 100644 (file)
@@ -919,6 +919,7 @@ static int sh_msiof_transfer_one(struct spi_controller *ctlr,
        void *rx_buf = t->rx_buf;
        unsigned int len = t->len;
        unsigned int bits = t->bits_per_word;
+       unsigned int max_wdlen = 256;
        unsigned int bytes_per_word;
        unsigned int words;
        int n;
@@ -932,17 +933,17 @@ static int sh_msiof_transfer_one(struct spi_controller *ctlr,
        if (!spi_controller_is_target(p->ctlr))
                sh_msiof_spi_set_clk_regs(p, t);
 
+       if (tx_buf)
+               max_wdlen = min(max_wdlen, p->tx_fifo_size);
+       if (rx_buf)
+               max_wdlen = min(max_wdlen, p->rx_fifo_size);
+
        while (ctlr->dma_tx && len > 15) {
                /*
                 *  DMA supports 32-bit words only, hence pack 8-bit and 16-bit
                 *  words, with byte resp. word swapping.
                 */
-               unsigned int l = 0;
-
-               if (tx_buf)
-                       l = min(round_down(len, 4), p->tx_fifo_size * 4);
-               if (rx_buf)
-                       l = min(round_down(len, 4), p->rx_fifo_size * 4);
+               unsigned int l = min(round_down(len, 4), max_wdlen * 4);
 
                if (bits <= 8) {
                        copy32 = copy_bswap32;