--- /dev/null
+1 Notes on the Free Translation Project
+***************************************
+
+Free software is going international! The Free Translation Project is
+a way to get maintainers of free software, translators, and users all
+together, so that free software will gradually become able to speak many
+languages. A few packages already provide translations for their
+messages.
+
+ If you found this `ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU `gettext' internally,
+itself available at your nearest GNU archive site. But you do _not_
+need to install GNU `gettext' prior to configuring, installing or using
+this package with messages translated.
+
+ Installers will find here some useful hints. These notes also
+explain how users should proceed for getting the programs to use the
+available translations. They tell how people wanting to contribute and
+work on translations can contact the appropriate team.
+
+ When reporting bugs in the `intl/' directory or bugs which may be
+related to internationalization, you should tell about the version of
+`gettext' which is used. The information can be found in the
+`intl/VERSION' file, in internationalized packages.
+
+1.1 Quick configuration advice
+==============================
+
+If you want to exploit the full power of internationalization, you
+should configure it using
+
+ ./configure --with-included-gettext
+
+to force usage of internationalizing routines provided within this
+package, despite the existence of internationalizing capabilities in the
+operating system where this package is being installed. So far, only
+the `gettext' implementation in the GNU C library version 2 provides as
+many features (such as locale alias, message inheritance, automatic
+charset conversion or plural form handling) as the implementation here.
+It is also not possible to offer this additional functionality on top
+of a `catgets' implementation. Future versions of GNU `gettext' will
+very likely convey even more functionality. So it might be a good idea
+to change to GNU `gettext' as soon as possible.
+
+ So you need _not_ provide this option if you are using GNU libc 2 or
+you have installed a recent copy of the GNU gettext package with the
+included `libintl'.
+
+1.2 INSTALL Matters
+===================
+
+Some packages are "localizable" when properly installed; the programs
+they contain can be made to speak your own native language. Most such
+packages use GNU `gettext'. Other packages have their own ways to
+internationalization, predating GNU `gettext'.
+
+ By default, this package will be installed to allow translation of
+messages. It will automatically detect whether the system already
+provides the GNU `gettext' functions. If not, the included GNU
+`gettext' library will be used. This library is wholly contained
+within this package, usually in the `intl/' subdirectory, so prior
+installation of the GNU `gettext' package is _not_ required.
+Installers may use special options at configuration time for changing
+the default behaviour. The commands:
+
+ ./configure --with-included-gettext
+ ./configure --disable-nls
+
+will, respectively, bypass any pre-existing `gettext' to use the
+internationalizing routines provided within this package, or else,
+_totally_ disable translation of messages.
+
+ When you already have GNU `gettext' installed on your system and run
+configure without an option for your new package, `configure' will
+probably detect the previously built and installed `libintl.a' file and
+will decide to use this. This might not be desirable. You should use
+the more recent version of the GNU `gettext' library. I.e. if the file
+`intl/VERSION' shows that the library which comes with this package is
+more recent, you should use
+
+ ./configure --with-included-gettext
+
+to prevent auto-detection.
+
+ The configuration process will not test for the `catgets' function
+and therefore it will not be used. The reason is that even an
+emulation of `gettext' on top of `catgets' could not provide all the
+extensions of the GNU `gettext' library.
+
+ Internationalized packages usually have many `po/LL.po' files, where
+LL gives an ISO 639 two-letter code identifying the language. Unless
+translations have been forbidden at `configure' time by using the
+`--disable-nls' switch, all available translations are installed
+together with the package. However, the environment variable `LINGUAS'
+may be set, prior to configuration, to limit the installed set.
+`LINGUAS' should then contain a space separated list of two-letter
+codes, stating which languages are allowed.
+
+1.3 Using This Package
+======================
+
+As a user, if your language has been installed for this package, you
+only have to set the `LANG' environment variable to the appropriate
+`LL_CC' combination. If you happen to have the `LC_ALL' or some other
+`LC_xxx' environment variables set, you should unset them before
+setting `LANG', otherwise the setting of `LANG' will not have the
+desired effect. Here `LL' is an ISO 639 two-letter language code, and
+`CC' is an ISO 3166 two-letter country code. For example, let's
+suppose that you speak German and live in Germany. At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
+
+ You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries. For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
+country code serves to distinguish the dialects.
+
+ The locale naming convention of `LL_CC', with `LL' denoting the
+language and `CC' denoting the country, is the one use on systems based
+on GNU libc. On other systems, some variations of this scheme are
+used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
+locales supported by your system for your language by running the
+command `locale -a | grep '^LL''.
+
+ Not all programs have translations for all languages. By default, an
+English message is shown in place of a nonexistent translation. If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries. For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+ Special advice for Norwegian users: The language code for Norwegian
+bokma*l changed from `no' to `nb' recently (in 2003). During the
+transition period, while some message catalogs for this language are
+installed under `nb' and some older ones under `no', it's recommended
+for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
+older translations are used.
+
+ In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect. For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
+
+1.4 Translating Teams
+=====================
+
+For the Free Translation Project to be a success, we need interested
+people who like their own language and write it well, and who are also
+able to synergize with other translators speaking the same language.
+Each translation team has its own mailing list. The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://translationproject.org/', in the "Teams" area.
+
+ If you'd like to volunteer to _work_ at translating messages, you
+should become a member of the translating team for your own language.
+The subscribing address is _not_ the same as the list itself, it has
+`-request' appended. For example, speakers of Swedish can send a
+message to `sv-request@li.org', having this message body:
+
+ subscribe
+
+ Keep in mind that team members are expected to participate
+_actively_ in translations, or at solving translational difficulties,
+rather than merely lurking around. If your team does not exist yet and
+you want to start one, or if you are unsure about what to do or how to
+get started, please write to `coordinator@translationproject.org' to
+reach the coordinator for all translator teams.
+
+ The English team is special. It works at improving and uniformizing
+the terminology in use. Proven linguistic skills are praised more than
+programming skills, here.
+
+1.5 Available Packages
+======================
+
+Languages are not equally supported in all packages. The following
+matrix shows the current state of internationalization, as of November
+2007. The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
+
+ Ready PO files af am ar az be bg bs ca cs cy da de el en en_GB eo
+ +----------------------------------------------------+
+ Compendium | [] [] [] [] |
+ a2ps | [] [] [] [] [] |
+ aegis | () |
+ ant-phone | () |
+ anubis | [] |
+ ap-utils | |
+ aspell | [] [] [] [] [] |
+ bash | [] |
+ bfd | |
+ bibshelf | [] |
+ binutils | |
+ bison | [] [] |
+ bison-runtime | [] |
+ bluez-pin | [] [] [] [] [] |
+ cflow | [] |
+ clisp | [] [] [] |
+ console-tools | [] [] |
+ coreutils | [] [] [] [] |
+ cpio | |
+ cpplib | [] [] [] |
+ cryptonit | [] |
+ dialog | |
+ diffutils | [] [] [] [] [] [] |
+ doodle | [] |
+ e2fsprogs | [] [] |
+ enscript | [] [] [] [] |
+ fetchmail | [] [] () [] [] |
+ findutils | [] |
+ findutils_stable | [] [] [] |
+ flex | [] [] [] |
+ fslint | |
+ gas | |
+ gawk | [] [] [] |
+ gcal | [] |
+ gcc | [] |
+ gettext-examples | [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] |
+ gettext-tools | [] [] |
+ gip | [] |
+ gliv | [] [] |
+ glunarclock | [] |
+ gmult | [] [] |
+ gnubiff | () |
+ gnucash | [] [] () () [] |
+ gnuedu | |
+ gnulib | [] |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | [] |
+ gpe-aerial | [] [] |
+ gpe-beam | [] [] |
+ gpe-calendar | |
+ gpe-clock | [] [] |
+ gpe-conf | [] [] |
+ gpe-contacts | |
+ gpe-edit | [] |
+ gpe-filemanager | |
+ gpe-go | [] |
+ gpe-login | [] [] |
+ gpe-ownerinfo | [] [] |
+ gpe-package | |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] |
+ gpe-taskmanager | [] [] |
+ gpe-timesheet | [] |
+ gpe-today | [] [] |
+ gpe-todo | |
+ gphoto2 | [] [] [] [] |
+ gprof | [] [] |
+ gpsdrive | |
+ gramadoir | [] [] |
+ grep | [] [] |
+ gretl | () |
+ gsasl | |
+ gss | |
+ gst-plugins-bad | [] [] |
+ gst-plugins-base | [] [] |
+ gst-plugins-good | [] [] [] |
+ gst-plugins-ugly | [] [] |
+ gstreamer | [] [] [] [] [] [] [] |
+ gtick | () |
+ gtkam | [] [] [] [] |
+ gtkorphan | [] [] |
+ gtkspell | [] [] [] [] |
+ gutenprint | [] |
+ hello | [] [] [] [] [] |
+ herrie | [] |
+ hylafax | |
+ idutils | [] [] |
+ indent | [] [] [] [] |
+ iso_15924 | |
+ iso_3166 | [] [] [] [] [] [] [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_4217 | [] [] [] |
+ iso_639 | [] [] [] [] |
+ jpilot | [] |
+ jtag | |
+ jwhois | |
+ kbd | [] [] [] [] |
+ keytouch | [] [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | [] |
+ latrine | () |
+ ld | [] |
+ leafpad | [] [] [] [] [] |
+ libc | [] [] [] [] |
+ libexif | [] |
+ libextractor | [] |
+ libgpewidget | [] [] [] |
+ libgpg-error | [] |
+ libgphoto2 | [] [] |
+ libgphoto2_port | [] [] |
+ libgsasl | |
+ libiconv | [] [] |
+ libidn | [] [] [] |
+ lifelines | [] () |
+ lilypond | [] |
+ lingoteach | |
+ lprng | |
+ lynx | [] [] [] [] |
+ m4 | [] [] [] [] |
+ mailfromd | |
+ mailutils | [] |
+ make | [] [] |
+ man-db | [] [] [] |
+ minicom | [] [] [] |
+ nano | [] [] [] |
+ opcodes | [] |
+ parted | [] [] |
+ pilot-qof | |
+ popt | [] [] [] |
+ psmisc | [] |
+ pwdutils | |
+ qof | |
+ radius | [] |
+ recode | [] [] [] [] [] [] |
+ rpm | [] |
+ screem | |
+ scrollkeeper | [] [] [] [] [] [] [] [] |
+ sed | [] [] [] |
+ shared-mime-info | [] [] [] [] () [] [] [] |
+ sharutils | [] [] [] [] [] [] |
+ shishi | |
+ skencil | [] () |
+ solfege | |
+ soundtracker | [] [] |
+ sp | [] |
+ system-tools-ba... | [] [] [] [] [] [] [] [] [] |
+ tar | [] [] |
+ texinfo | [] [] [] |
+ tin | () () |
+ tuxpaint | [] [] [] [] [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux | [] [] [] [] |
+ util-linux-ng | [] [] [] [] |
+ vorbis-tools | [] |
+ wastesedge | () |
+ wdiff | [] [] [] [] |
+ wget | [] [] [] |
+ xchat | [] [] [] [] [] [] [] |
+ xkeyboard-config | [] |
+ xpad | [] [] [] |
+ +----------------------------------------------------+
+ af am ar az be bg bs ca cs cy da de el en en_GB eo
+ 6 0 2 1 8 26 2 40 48 2 56 88 15 1 15 18
+
+ es et eu fa fi fr ga gl gu he hi hr hu id is it
+ +--------------------------------------------------+
+ Compendium | [] [] [] [] [] |
+ a2ps | [] [] [] () |
+ aegis | |
+ ant-phone | [] |
+ anubis | [] |
+ ap-utils | [] [] |
+ aspell | [] [] [] |
+ bash | [] |
+ bfd | [] [] |
+ bibshelf | [] [] [] |
+ binutils | [] [] [] |
+ bison | [] [] [] [] [] [] |
+ bison-runtime | [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] |
+ cflow | [] |
+ clisp | [] [] |
+ console-tools | |
+ coreutils | [] [] [] [] [] [] |
+ cpio | [] [] [] |
+ cpplib | [] [] |
+ cryptonit | [] |
+ dialog | [] [] [] |
+ diffutils | [] [] [] [] [] [] [] [] [] |
+ doodle | [] [] |
+ e2fsprogs | [] [] [] |
+ enscript | [] [] [] |
+ fetchmail | [] |
+ findutils | [] [] [] |
+ findutils_stable | [] [] [] [] |
+ flex | [] [] [] |
+ fslint | |
+ gas | [] [] |
+ gawk | [] [] [] [] () |
+ gcal | [] [] |
+ gcc | [] |
+ gettext-examples | [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] |
+ gip | [] [] [] [] |
+ gliv | () |
+ glunarclock | [] [] [] |
+ gmult | [] [] [] |
+ gnubiff | () () |
+ gnucash | () () () |
+ gnuedu | [] |
+ gnulib | [] [] [] |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | |
+ gpe-aerial | [] [] |
+ gpe-beam | [] [] |
+ gpe-calendar | |
+ gpe-clock | [] [] [] [] |
+ gpe-conf | [] |
+ gpe-contacts | [] [] |
+ gpe-edit | [] [] [] [] |
+ gpe-filemanager | [] |
+ gpe-go | [] [] [] |
+ gpe-login | [] [] [] |
+ gpe-ownerinfo | [] [] [] [] [] |
+ gpe-package | [] |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] [] [] |
+ gpe-taskmanager | [] [] [] |
+ gpe-timesheet | [] [] [] [] |
+ gpe-today | [] [] [] [] |
+ gpe-todo | [] |
+ gphoto2 | [] [] [] [] [] |
+ gprof | [] [] [] [] [] |
+ gpsdrive | [] |
+ gramadoir | [] [] |
+ grep | [] [] [] |
+ gretl | [] [] [] () |
+ gsasl | [] [] |
+ gss | [] [] |
+ gst-plugins-bad | [] [] [] [] |
+ gst-plugins-base | [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] |
+ gstreamer | [] [] [] |
+ gtick | [] [] [] |
+ gtkam | [] [] [] [] |
+ gtkorphan | [] [] |
+ gtkspell | [] [] [] [] [] [] [] |
+ gutenprint | [] |
+ hello | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ herrie | [] |
+ hylafax | |
+ idutils | [] [] [] [] [] |
+ indent | [] [] [] [] [] [] [] [] [] [] |
+ iso_15924 | [] |
+ iso_3166 | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ iso_3166_2 | [] |
+ iso_4217 | [] [] [] [] [] [] |
+ iso_639 | [] [] [] [] [] [] |
+ jpilot | [] [] |
+ jtag | [] |
+ jwhois | [] [] [] [] [] |
+ kbd | [] [] |
+ keytouch | [] [] [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | [] [] |
+ latrine | [] [] |
+ ld | [] [] [] [] |
+ leafpad | [] [] [] [] [] [] |
+ libc | [] [] [] [] [] |
+ libexif | [] |
+ libextractor | [] |
+ libgpewidget | [] [] [] [] [] |
+ libgpg-error | [] |
+ libgphoto2 | [] [] [] |
+ libgphoto2_port | [] [] |
+ libgsasl | [] [] |
+ libiconv | [] [] [] |
+ libidn | [] [] |
+ lifelines | () |
+ lilypond | [] [] [] |
+ lingoteach | [] [] [] |
+ lprng | |
+ lynx | [] [] [] |
+ m4 | [] [] [] [] |
+ mailfromd | |
+ mailutils | [] [] |
+ make | [] [] [] [] [] [] [] [] |
+ man-db | [] |
+ minicom | [] [] [] [] |
+ nano | [] [] [] [] [] [] [] |
+ opcodes | [] [] [] [] |
+ parted | [] [] [] |
+ pilot-qof | |
+ popt | [] [] [] [] |
+ psmisc | [] [] |
+ pwdutils | |
+ qof | [] |
+ radius | [] [] |
+ recode | [] [] [] [] [] [] [] [] |
+ rpm | [] [] |
+ screem | |
+ scrollkeeper | [] [] [] |
+ sed | [] [] [] [] [] |
+ shared-mime-info | [] [] [] [] [] [] |
+ sharutils | [] [] [] [] [] [] [] [] |
+ shishi | [] |
+ skencil | [] [] |
+ solfege | [] |
+ soundtracker | [] [] [] |
+ sp | [] |
+ system-tools-ba... | [] [] [] [] [] [] [] [] [] |
+ tar | [] [] [] [] [] |
+ texinfo | [] [] [] |
+ tin | [] () |
+ tuxpaint | [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | [] [] |
+ util-linux | [] [] [] [] [] [] [] |
+ util-linux-ng | [] [] [] [] [] [] [] |
+ vorbis-tools | |
+ wastesedge | () |
+ wdiff | [] [] [] [] [] [] [] [] |
+ wget | [] [] [] [] [] [] [] [] |
+ xchat | [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] [] |
+ xpad | [] [] [] |
+ +--------------------------------------------------+
+ es et eu fa fi fr ga gl gu he hi hr hu id is it
+ 85 22 14 2 48 101 61 12 2 8 2 6 53 29 1 52
+
+ ja ka ko ku ky lg lt lv mk mn ms mt nb ne nl nn
+ +--------------------------------------------------+
+ Compendium | [] |
+ a2ps | () [] [] |
+ aegis | () |
+ ant-phone | [] |
+ anubis | [] [] [] |
+ ap-utils | [] |
+ aspell | [] [] |
+ bash | [] |
+ bfd | |
+ bibshelf | [] |
+ binutils | |
+ bison | [] [] [] |
+ bison-runtime | [] [] [] |
+ bluez-pin | [] [] [] |
+ cflow | |
+ clisp | [] |
+ console-tools | |
+ coreutils | [] |
+ cpio | [] |
+ cpplib | [] |
+ cryptonit | [] |
+ dialog | [] [] |
+ diffutils | [] [] [] |
+ doodle | |
+ e2fsprogs | [] |
+ enscript | [] |
+ fetchmail | [] [] |
+ findutils | [] |
+ findutils_stable | [] |
+ flex | [] [] |
+ fslint | |
+ gas | |
+ gawk | [] [] |
+ gcal | |
+ gcc | |
+ gettext-examples | [] [] [] |
+ gettext-runtime | [] [] [] |
+ gettext-tools | [] [] |
+ gip | [] [] |
+ gliv | [] |
+ glunarclock | [] [] |
+ gmult | [] [] [] |
+ gnubiff | |
+ gnucash | () () () |
+ gnuedu | |
+ gnulib | [] [] |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | [] |
+ gpe-aerial | [] |
+ gpe-beam | [] |
+ gpe-calendar | [] |
+ gpe-clock | [] [] [] |
+ gpe-conf | [] [] [] |
+ gpe-contacts | [] |
+ gpe-edit | [] [] [] |
+ gpe-filemanager | [] [] |
+ gpe-go | [] [] [] |
+ gpe-login | [] [] [] |
+ gpe-ownerinfo | [] [] |
+ gpe-package | [] [] |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] [] |
+ gpe-taskmanager | [] [] [] [] |
+ gpe-timesheet | [] |
+ gpe-today | [] [] |
+ gpe-todo | [] |
+ gphoto2 | [] [] |
+ gprof | [] |
+ gpsdrive | [] |
+ gramadoir | () |
+ grep | [] [] |
+ gretl | |
+ gsasl | [] |
+ gss | |
+ gst-plugins-bad | [] |
+ gst-plugins-base | [] |
+ gst-plugins-good | [] |
+ gst-plugins-ugly | [] |
+ gstreamer | [] |
+ gtick | [] |
+ gtkam | [] [] |
+ gtkorphan | [] |
+ gtkspell | [] [] |
+ gutenprint | [] |
+ hello | [] [] [] [] [] [] [] |
+ herrie | [] |
+ hylafax | |
+ idutils | [] |
+ indent | [] [] |
+ iso_15924 | [] |
+ iso_3166 | [] [] [] [] [] [] [] [] |
+ iso_3166_2 | [] |
+ iso_4217 | [] [] [] |
+ iso_639 | [] [] [] [] |
+ jpilot | () () |
+ jtag | |
+ jwhois | [] |
+ kbd | [] |
+ keytouch | [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | |
+ latrine | [] |
+ ld | |
+ leafpad | [] [] |
+ libc | [] [] [] |
+ libexif | |
+ libextractor | |
+ libgpewidget | [] |
+ libgpg-error | |
+ libgphoto2 | [] |
+ libgphoto2_port | [] |
+ libgsasl | [] |
+ libiconv | [] |
+ libidn | [] [] |
+ lifelines | [] |
+ lilypond | [] |
+ lingoteach | [] |
+ lprng | |
+ lynx | [] [] |
+ m4 | [] [] |
+ mailfromd | |
+ mailutils | |
+ make | [] [] [] |
+ man-db | |
+ minicom | [] |
+ nano | [] [] [] |
+ opcodes | [] |
+ parted | [] [] |
+ pilot-qof | |
+ popt | [] [] [] |
+ psmisc | [] [] [] |
+ pwdutils | |
+ qof | |
+ radius | |
+ recode | [] |
+ rpm | [] [] |
+ screem | [] |
+ scrollkeeper | [] [] [] [] |
+ sed | [] [] |
+ shared-mime-info | [] [] [] [] [] [] [] |
+ sharutils | [] [] |
+ shishi | |
+ skencil | |
+ solfege | () () |
+ soundtracker | |
+ sp | () |
+ system-tools-ba... | [] [] [] [] |
+ tar | [] [] [] |
+ texinfo | [] [] |
+ tin | |
+ tuxpaint | () [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux | [] [] |
+ util-linux-ng | [] [] |
+ vorbis-tools | |
+ wastesedge | [] |
+ wdiff | [] [] |
+ wget | [] [] |
+ xchat | [] [] [] [] |
+ xkeyboard-config | [] [] [] |
+ xpad | [] [] [] |
+ +--------------------------------------------------+
+ ja ka ko ku ky lg lt lv mk mn ms mt nb ne nl nn
+ 51 2 25 3 2 0 6 0 2 2 20 0 11 1 103 6
+
+ or pa pl pt pt_BR rm ro ru rw sk sl sq sr sv ta
+ +--------------------------------------------------+
+ Compendium | [] [] [] [] [] |
+ a2ps | () [] [] [] [] [] [] |
+ aegis | () () |
+ ant-phone | [] [] |
+ anubis | [] [] [] |
+ ap-utils | () |
+ aspell | [] [] [] |
+ bash | [] [] |
+ bfd | |
+ bibshelf | [] |
+ binutils | [] [] |
+ bison | [] [] [] [] [] |
+ bison-runtime | [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] [] [] [] [] |
+ cflow | [] |
+ clisp | [] |
+ console-tools | [] |
+ coreutils | [] [] [] [] |
+ cpio | [] [] [] |
+ cpplib | [] |
+ cryptonit | [] [] |
+ dialog | [] |
+ diffutils | [] [] [] [] [] [] |
+ doodle | [] [] |
+ e2fsprogs | [] [] |
+ enscript | [] [] [] [] [] |
+ fetchmail | [] [] [] |
+ findutils | [] [] [] |
+ findutils_stable | [] [] [] [] [] [] |
+ flex | [] [] [] [] [] |
+ fslint | [] |
+ gas | |
+ gawk | [] [] [] [] |
+ gcal | [] |
+ gcc | [] [] |
+ gettext-examples | [] [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] [] [] [] |
+ gip | [] [] [] [] |
+ gliv | [] [] [] [] [] [] |
+ glunarclock | [] [] [] [] [] [] |
+ gmult | [] [] [] [] |
+ gnubiff | () [] |
+ gnucash | () [] |
+ gnuedu | |
+ gnulib | [] [] [] |
+ gnunet | |
+ gnunet-gtk | [] |
+ gnutls | [] [] |
+ gpe-aerial | [] [] [] [] [] [] [] |
+ gpe-beam | [] [] [] [] [] [] [] |
+ gpe-calendar | [] [] [] [] |
+ gpe-clock | [] [] [] [] [] [] [] [] |
+ gpe-conf | [] [] [] [] [] [] [] |
+ gpe-contacts | [] [] [] [] [] |
+ gpe-edit | [] [] [] [] [] [] [] [] [] |
+ gpe-filemanager | [] [] |
+ gpe-go | [] [] [] [] [] [] [] [] |
+ gpe-login | [] [] [] [] [] [] [] [] |
+ gpe-ownerinfo | [] [] [] [] [] [] [] [] |
+ gpe-package | [] [] |
+ gpe-sketchbook | [] [] [] [] [] [] [] [] |
+ gpe-su | [] [] [] [] [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] [] [] [] [] |
+ gpe-timesheet | [] [] [] [] [] [] [] [] |
+ gpe-today | [] [] [] [] [] [] [] [] |
+ gpe-todo | [] [] [] [] |
+ gphoto2 | [] [] [] [] [] [] |
+ gprof | [] [] [] |
+ gpsdrive | [] [] |
+ gramadoir | [] [] |
+ grep | [] [] [] [] |
+ gretl | [] [] [] |
+ gsasl | [] [] [] |
+ gss | [] [] [] [] |
+ gst-plugins-bad | [] [] [] |
+ gst-plugins-base | [] [] |
+ gst-plugins-good | [] [] |
+ gst-plugins-ugly | [] [] [] |
+ gstreamer | [] [] [] [] |
+ gtick | [] |
+ gtkam | [] [] [] [] [] |
+ gtkorphan | [] |
+ gtkspell | [] [] [] [] [] [] [] [] |
+ gutenprint | [] |
+ hello | [] [] [] [] [] [] [] [] |
+ herrie | [] [] [] |
+ hylafax | |
+ idutils | [] [] [] [] [] |
+ indent | [] [] [] [] [] [] [] |
+ iso_15924 | |
+ iso_3166 | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_4217 | [] [] [] [] [] [] [] |
+ iso_639 | [] [] [] [] [] [] [] |
+ jpilot | |
+ jtag | [] |
+ jwhois | [] [] [] [] |
+ kbd | [] [] [] |
+ keytouch | [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | [] |
+ latrine | |
+ ld | [] |
+ leafpad | [] [] [] [] [] [] |
+ libc | [] [] [] [] |
+ libexif | [] [] |
+ libextractor | [] [] |
+ libgpewidget | [] [] [] [] [] [] [] [] |
+ libgpg-error | [] [] [] |
+ libgphoto2 | [] |
+ libgphoto2_port | [] [] [] |
+ libgsasl | [] [] [] [] |
+ libiconv | [] [] [] |
+ libidn | [] [] () |
+ lifelines | [] [] |
+ lilypond | |
+ lingoteach | [] |
+ lprng | [] |
+ lynx | [] [] [] |
+ m4 | [] [] [] [] [] |
+ mailfromd | [] |
+ mailutils | [] [] [] |
+ make | [] [] [] [] |
+ man-db | [] [] [] [] |
+ minicom | [] [] [] [] [] |
+ nano | [] [] [] [] |
+ opcodes | [] [] |
+ parted | [] |
+ pilot-qof | |
+ popt | [] [] [] [] |
+ psmisc | [] [] |
+ pwdutils | [] [] |
+ qof | [] [] |
+ radius | [] [] |
+ recode | [] [] [] [] [] [] [] |
+ rpm | [] [] [] [] |
+ screem | |
+ scrollkeeper | [] [] [] [] [] [] [] |
+ sed | [] [] [] [] [] [] [] [] [] |
+ shared-mime-info | [] [] [] [] [] [] |
+ sharutils | [] [] [] [] |
+ shishi | [] |
+ skencil | [] [] [] |
+ solfege | [] |
+ soundtracker | [] [] |
+ sp | |
+ system-tools-ba... | [] [] [] [] [] [] [] [] [] |
+ tar | [] [] [] [] |
+ texinfo | [] [] [] [] |
+ tin | () |
+ tuxpaint | [] [] [] [] [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux | [] [] [] [] |
+ util-linux-ng | [] [] [] [] |
+ vorbis-tools | [] |
+ wastesedge | |
+ wdiff | [] [] [] [] [] [] [] |
+ wget | [] [] [] [] |
+ xchat | [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] |
+ xpad | [] [] [] |
+ +--------------------------------------------------+
+ or pa pl pt pt_BR rm ro ru rw sk sl sq sr sv ta
+ 0 5 77 31 53 4 58 72 3 45 46 9 45 122 3
+
+ tg th tk tr uk ven vi wa xh zh_CN zh_HK zh_TW zu
+ +---------------------------------------------------+
+ Compendium | [] [] [] [] | 19
+ a2ps | [] [] [] | 19
+ aegis | [] | 1
+ ant-phone | [] [] | 6
+ anubis | [] [] [] | 11
+ ap-utils | () [] | 4
+ aspell | [] [] [] | 16
+ bash | [] | 6
+ bfd | | 2
+ bibshelf | [] | 7
+ binutils | [] [] [] [] | 9
+ bison | [] [] [] [] | 20
+ bison-runtime | [] [] [] [] | 18
+ bluez-pin | [] [] [] [] [] [] | 28
+ cflow | [] [] | 5
+ clisp | | 9
+ console-tools | [] [] | 5
+ coreutils | [] [] [] | 18
+ cpio | [] [] [] [] | 11
+ cpplib | [] [] [] [] [] | 12
+ cryptonit | [] | 6
+ dialog | [] [] [] | 9
+ diffutils | [] [] [] [] [] | 29
+ doodle | [] | 6
+ e2fsprogs | [] [] | 10
+ enscript | [] [] [] | 16
+ fetchmail | [] [] | 12
+ findutils | [] [] [] | 11
+ findutils_stable | [] [] [] [] | 18
+ flex | [] [] | 15
+ fslint | [] | 2
+ gas | [] | 3
+ gawk | [] [] [] | 16
+ gcal | [] | 5
+ gcc | [] [] [] | 7
+ gettext-examples | [] [] [] [] [] [] | 29
+ gettext-runtime | [] [] [] [] [] [] | 28
+ gettext-tools | [] [] [] [] [] | 20
+ gip | [] [] | 13
+ gliv | [] [] | 11
+ glunarclock | [] [] [] | 15
+ gmult | [] [] [] [] | 16
+ gnubiff | [] | 2
+ gnucash | () [] | 5
+ gnuedu | [] | 2
+ gnulib | [] | 10
+ gnunet | | 0
+ gnunet-gtk | [] [] | 3
+ gnutls | | 4
+ gpe-aerial | [] [] | 14
+ gpe-beam | [] [] | 14
+ gpe-calendar | [] [] | 7
+ gpe-clock | [] [] [] [] | 21
+ gpe-conf | [] [] [] | 16
+ gpe-contacts | [] [] | 10
+ gpe-edit | [] [] [] [] [] | 22
+ gpe-filemanager | [] [] | 7
+ gpe-go | [] [] [] [] | 19
+ gpe-login | [] [] [] [] [] | 21
+ gpe-ownerinfo | [] [] [] [] | 21
+ gpe-package | [] | 6
+ gpe-sketchbook | [] [] | 16
+ gpe-su | [] [] [] [] | 21
+ gpe-taskmanager | [] [] [] [] | 21
+ gpe-timesheet | [] [] [] [] | 18
+ gpe-today | [] [] [] [] [] | 21
+ gpe-todo | [] [] | 8
+ gphoto2 | [] [] [] [] | 21
+ gprof | [] [] | 13
+ gpsdrive | [] | 5
+ gramadoir | [] | 7
+ grep | [] | 12
+ gretl | | 6
+ gsasl | [] [] [] | 9
+ gss | [] | 7
+ gst-plugins-bad | [] [] [] | 13
+ gst-plugins-base | [] [] | 11
+ gst-plugins-good | [] [] [] [] [] | 16
+ gst-plugins-ugly | [] [] [] | 13
+ gstreamer | [] [] [] | 18
+ gtick | [] [] | 7
+ gtkam | [] | 16
+ gtkorphan | [] | 7
+ gtkspell | [] [] [] [] [] [] | 27
+ gutenprint | | 4
+ hello | [] [] [] [] [] | 38
+ herrie | [] [] | 8
+ hylafax | | 0
+ idutils | [] [] | 15
+ indent | [] [] [] [] [] | 28
+ iso_15924 | [] [] | 4
+ iso_3166 | [] [] [] [] [] [] [] [] [] | 54
+ iso_3166_2 | [] [] | 4
+ iso_4217 | [] [] [] [] [] | 24
+ iso_639 | [] [] [] [] [] | 26
+ jpilot | [] [] [] [] | 7
+ jtag | [] | 3
+ jwhois | [] [] [] | 13
+ kbd | [] [] [] | 13
+ keytouch | [] | 8
+ keytouch-editor | [] | 5
+ keytouch-keyboa... | [] | 5
+ latrine | [] [] | 5
+ ld | [] [] [] [] | 10
+ leafpad | [] [] [] [] [] | 24
+ libc | [] [] [] | 19
+ libexif | [] | 5
+ libextractor | [] | 5
+ libgpewidget | [] [] [] | 20
+ libgpg-error | [] | 6
+ libgphoto2 | [] [] | 9
+ libgphoto2_port | [] [] [] | 11
+ libgsasl | [] | 8
+ libiconv | [] [] | 11
+ libidn | [] [] | 11
+ lifelines | | 4
+ lilypond | [] | 6
+ lingoteach | [] | 6
+ lprng | [] | 2
+ lynx | [] [] [] | 15
+ m4 | [] [] [] | 18
+ mailfromd | [] [] | 3
+ mailutils | [] [] | 8
+ make | [] [] [] | 20
+ man-db | [] | 9
+ minicom | [] | 14
+ nano | [] [] [] | 20
+ opcodes | [] [] | 10
+ parted | [] [] [] | 11
+ pilot-qof | [] | 1
+ popt | [] [] [] [] | 18
+ psmisc | [] [] | 10
+ pwdutils | [] | 3
+ qof | [] | 4
+ radius | [] [] | 7
+ recode | [] [] [] | 25
+ rpm | [] [] [] [] | 13
+ screem | [] | 2
+ scrollkeeper | [] [] [] [] | 26
+ sed | [] [] [] [] | 23
+ shared-mime-info | [] [] [] | 29
+ sharutils | [] [] [] | 23
+ shishi | [] | 3
+ skencil | [] | 7
+ solfege | [] | 3
+ soundtracker | [] [] | 9
+ sp | [] | 3
+ system-tools-ba... | [] [] [] [] [] [] [] | 38
+ tar | [] [] [] | 17
+ texinfo | [] [] [] | 15
+ tin | | 1
+ tuxpaint | [] [] [] | 19
+ unicode-han-tra... | | 0
+ unicode-transla... | | 2
+ util-linux | [] [] [] | 20
+ util-linux-ng | [] [] [] | 20
+ vorbis-tools | [] [] | 4
+ wastesedge | | 1
+ wdiff | [] [] | 23
+ wget | [] [] [] | 20
+ xchat | [] [] [] [] | 29
+ xkeyboard-config | [] [] [] | 14
+ xpad | [] [] [] | 15
+ +---------------------------------------------------+
+ 76 teams tg th tk tr uk ven vi wa xh zh_CN zh_HK zh_TW zu
+ 163 domains 0 3 1 74 51 0 143 21 1 57 7 45 0 2036
+
+ Some counters in the preceding matrix are higher than the number of
+visible blocks let us expect. This is because a few extra PO files are
+used for implementing regional variants of languages, or language
+dialects.
+
+ For a PO file in the matrix above to be effective, the package to
+which it applies should also have been internationalized and
+distributed as such by its maintainer. There might be an observable
+lag between the mere existence a PO file and its wide availability in a
+distribution.
+
+ If November 2007 seems to be old, you may fetch a more recent copy
+of this `ABOUT-NLS' file on most GNU archive sites. The most
+up-to-date matrix with full percentage details can be found at
+`http://translationproject.org/extra/matrix.html'.
+
+1.6 Using `gettext' in new packages
+===================================
+
+If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package. Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library. This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+ Once the sources are changed appropriately and the setup can handle
+the use of `gettext' the only thing missing are the translations. The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project. Therefore the information given above
+applies also for every other Free Software Project. Contact
+`coordinator@translationproject.org' to make the `.pot' files available
+to the translation teams.
+
- Parse the string flags from sarg.conf once during the reading of sarg.conf instead of manipulating and duplicating the tests of the strings where they are used.
- Useragent report limited to requested date range.
- Link to external css file instead of including it verbatim in each HTML file (thanks to Maxim Britov).
+ - Enable gettext configuration for autotools.
Feb-04-2010 Version 2.2.7
- Extra compile and run time protection (FORTIFY_SOURCE) fixed in configure.
# Output a system dependent set of variables, describing how to set the
# run time search path of shared libraries in an executable.
#
-# Copyright 1996-2003 Free Software Foundation, Inc.
+# Copyright 1996-2007 Free Software Foundation, Inc.
# Taken from GNU libtool, 2001
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
#
# The first argument passed to this file is the canonical host specification,
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
# known workaround is to choose shorter directory names for the build
# directory and/or the installation directory.
-# All known linkers require a `.a' archive for static linking (except M$VC,
+# All known linkers require a `.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
shrext=.so
host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+# Code taken from libtool.m4's _LT_CC_BASENAME.
+
+for cc_temp in $CC""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
+
# Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC.
wl=
aix*)
wl='-Wl,'
;;
- mingw* | pw32* | os2*)
+ darwin*)
+ case $cc_basename in
+ xlc*)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ mingw* | cygwin* | pw32* | os2*)
;;
hpux9* | hpux10* | hpux11*)
wl='-Wl,'
;;
newsos6)
;;
- linux*)
- case $CC in
- icc|ecc)
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ icc* | ecc*)
+ wl='-Wl,'
+ ;;
+ pgcc | pgf77 | pgf90)
wl='-Wl,'
;;
- ccc)
+ ccc*)
wl='-Wl,'
;;
+ como)
+ wl='-lopt='
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
esac
;;
osf3* | osf4* | osf5*)
wl='-Wl,'
;;
- sco3.2v5*)
+ rdos*)
;;
solaris*)
wl='-Wl,'
sunos4*)
wl='-Qoption ld '
;;
- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ sysv4 | sysv4.2uw2* | sysv4.3*)
wl='-Wl,'
;;
sysv4*MP*)
;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ wl='-Wl,'
+ ;;
+ unicos*)
+ wl='-Wl,'
+ ;;
uts4*)
;;
esac
with_gnu_ld=no
fi
;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
openbsd*)
with_gnu_ld=no
;;
ld_shlibs=yes
if test "$with_gnu_ld" = yes; then
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ # Unlike libtool, we use -rpath here, not --rpath, since the documented
+ # option of GNU ld is called -rpath, not --rpath.
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
case "$host_os" in
aix3* | aix4* | aix5*)
# On AIX/PPC, the GNU linker is very broken
# that the semantics of dynamic libraries on AmigaOS, at least up
# to version 4, is to share data among multiple programs linked
# with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can use
+ # behavior of shared libraries on other platforms, we cannot use
# them.
ld_shlibs=no
;;
ld_shlibs=no
fi
;;
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ gnu* | linux* | k*bsd*-gnu)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
netbsd*)
;;
- solaris* | sysv5*)
+ solaris*)
if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
ld_shlibs=no
elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
ld_shlibs=no
fi
;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
sunos4*)
hardcode_direct=yes
;;
fi
;;
esac
- if test "$ld_shlibs" = yes; then
- # Unlike libtool, we use -rpath here, not --rpath, since the documented
- # option of GNU ld is called -rpath, not --rpath.
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ if test "$ld_shlibs" = no; then
+ hardcode_libdir_flag_spec=
fi
else
case "$host_os" in
break
fi
done
+ ;;
esac
fi
hardcode_direct=yes
strings "$collect2name" | grep resolve_lib_name >/dev/null
then
# We have reworked collect2
- hardcode_direct=yes
+ :
else
# We have old collect2
hardcode_direct=unsupported
hardcode_libdir_flag_spec='-L$libdir'
hardcode_libdir_separator=
fi
+ ;;
esac
fi
# Begin _LT_AC_SYS_LIBPATH_AIX.
# see comment about different semantics on the GNU ld section
ld_shlibs=no
;;
- bsdi4*)
+ bsdi[45]*)
;;
cygwin* | mingw* | pw32*)
# When not using gcc, we currently assume that we are using
libext=lib
;;
darwin* | rhapsody*)
- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
- hardcode_direct=no
+ hardcode_direct=no
+ if test "$GCC" = yes ; then
+ :
+ else
+ case $cc_basename in
+ xlc*)
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
fi
;;
dgux*)
hardcode_direct=yes
hardcode_minus_L=yes
;;
- freebsd*)
+ freebsd* | dragonfly*)
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
;;
# but as the default location of the library.
hardcode_minus_L=yes
;;
- hpux10* | hpux11*)
+ hpux10*)
if test "$with_gnu_ld" = no; then
- case "$host_cpu" in
- hppa*64*)
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=no
- ;;
- ia64*)
- hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+ hpux11*)
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ case $host_cpu in
+ hppa*64*|ia64*)
hardcode_direct=no
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
;;
*)
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
hardcode_direct=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_libdir_separator=:
;;
openbsd*)
- hardcode_direct=yes
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ else
+ case "$host_os" in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
else
- case "$host_os" in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
+ ld_shlibs=no
fi
;;
os2*)
fi
hardcode_libdir_separator=:
;;
- sco3.2v5*)
- ;;
solaris*)
hardcode_libdir_flag_spec='-R$libdir'
;;
ld_shlibs=yes
fi
;;
- sysv4.2uw2*)
- hardcode_direct=yes
- hardcode_minus_L=no
- ;;
- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
;;
- sysv5*)
- hardcode_libdir_flag_spec=
+ sysv5* | sco3.2v5* | sco5v6*)
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+ hardcode_libdir_separator=':'
;;
uts4*)
hardcode_libdir_flag_spec='-L$libdir'
# Check dynamic linker characteristics
# Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER.
+# Unlike libtool.m4, here we don't care about _all_ names of the library, but
+# only about the one the linker finds when passed -lNAME. This is the last
+# element of library_names_spec in libtool.m4, or possibly two of them if the
+# linker has special search rules.
+library_names_spec= # the last element of library_names_spec in libtool.m4
libname_spec='lib$name'
case "$host_os" in
aix3*)
+ library_names_spec='$libname.a'
;;
aix4* | aix5*)
+ library_names_spec='$libname$shrext'
;;
amigaos*)
+ library_names_spec='$libname.a'
;;
beos*)
+ library_names_spec='$libname$shrext'
;;
- bsdi4*)
+ bsdi[45]*)
+ library_names_spec='$libname$shrext'
;;
cygwin* | mingw* | pw32*)
shrext=.dll
+ library_names_spec='$libname.dll.a $libname.lib'
;;
darwin* | rhapsody*)
shrext=.dylib
+ library_names_spec='$libname$shrext'
;;
dgux*)
+ library_names_spec='$libname$shrext'
;;
freebsd1*)
;;
- freebsd*)
+ freebsd* | dragonfly*)
+ case "$host_os" in
+ freebsd[123]*)
+ library_names_spec='$libname$shrext$versuffix' ;;
+ *)
+ library_names_spec='$libname$shrext' ;;
+ esac
;;
gnu*)
+ library_names_spec='$libname$shrext'
;;
hpux9* | hpux10* | hpux11*)
- case "$host_cpu" in
+ case $host_cpu in
ia64*)
shrext=.so
;;
shrext=.sl
;;
esac
+ library_names_spec='$libname$shrext'
+ ;;
+ interix[3-9]*)
+ library_names_spec='$libname$shrext'
;;
irix5* | irix6* | nonstopux*)
+ library_names_spec='$libname$shrext'
case "$host_os" in
irix5* | nonstopux*)
libsuff= shlibsuff=
;;
linux*oldld* | linux*aout* | linux*coff*)
;;
- linux*)
+ linux* | k*bsd*-gnu)
+ library_names_spec='$libname$shrext'
+ ;;
+ knetbsd*-gnu)
+ library_names_spec='$libname$shrext'
;;
netbsd*)
+ library_names_spec='$libname$shrext'
;;
newsos6)
+ library_names_spec='$libname$shrext'
;;
- nto-qnx)
+ nto-qnx*)
+ library_names_spec='$libname$shrext'
;;
openbsd*)
+ library_names_spec='$libname$shrext$versuffix'
;;
os2*)
libname_spec='$name'
shrext=.dll
+ library_names_spec='$libname.a'
;;
osf3* | osf4* | osf5*)
+ library_names_spec='$libname$shrext'
;;
- sco3.2v5*)
+ rdos*)
;;
solaris*)
+ library_names_spec='$libname$shrext'
;;
sunos4*)
+ library_names_spec='$libname$shrext$versuffix'
;;
- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ sysv4 | sysv4.3*)
+ library_names_spec='$libname$shrext'
;;
sysv4*MP*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ library_names_spec='$libname$shrext'
;;
uts4*)
+ library_names_spec='$libname$shrext'
;;
esac
sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
+escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
+LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
# How to pass a linker flag through the compiler.
wl="$escaped_wl"
# Shared library suffix (normally "so").
shlibext="$shlibext"
+# Format of library name prefix.
+libname_spec="$escaped_libname_spec"
+
+# Library names that the linker finds when passed -lNAME.
+library_names_spec="$escaped_library_names_spec"
+
# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
AC_C_CONST
AC_STRUCT_TM
+AM_GNU_GETTEXT_VERSION([0.17])
+AM_GNU_GETTEXT([external])
+
AC_SYS_LARGEFILE
# Check whether fopen64 is available and whether _LARGEFILE64_SOURCE
fi
])
-AC_CONFIG_FILES([Makefile])
+AC_CONFIG_FILES([Makefile po/Makefile.in])
AC_OUTPUT
--- /dev/null
+2010-02-09 gettextize <bug-gnu-gettext@gnu.org>
+
+ * Makefile.in.in: New file, from gettext-0.17.
+ * boldquot.sed: New file, from gettext-0.17.
+ * en@boldquot.header: New file, from gettext-0.17.
+ * en@quot.header: New file, from gettext-0.17.
+ * insert-header.sin: New file, from gettext-0.17.
+ * quot.sed: New file, from gettext-0.17.
+ * remove-potcdate.sin: New file, from gettext-0.17.
+ * Rules-quot: New file, from gettext-0.17.
+ * POTFILES.in: New file.
+
--- /dev/null
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-1997, 2000-2007 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
+#
+# This file can be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
+#
+# Origin: gettext-0.17
+GETTEXT_MACRO_VERSION = 0.17
+
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+
+SHELL = /bin/sh
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datarootdir = @datarootdir@
+datadir = @datadir@
+localedir = @localedir@
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+
+# We use $(mkdir_p).
+# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
+# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
+# @install_sh@ does not start with $(SHELL), so we add it.
+# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
+# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
+# versions, $(mkinstalldirs) and $(install_sh) are unused.
+mkinstalldirs = $(SHELL) @install_sh@ -d
+install_sh = $(SHELL) @install_sh@
+MKDIR_P = @MKDIR_P@
+mkdir_p = @mkdir_p@
+
+GMSGFMT_ = @GMSGFMT@
+GMSGFMT_no = @GMSGFMT@
+GMSGFMT_yes = @GMSGFMT_015@
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+MSGFMT_ = @MSGFMT@
+MSGFMT_no = @MSGFMT@
+MSGFMT_yes = @MSGFMT_015@
+MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = @XGETTEXT@
+XGETTEXT_no = @XGETTEXT@
+XGETTEXT_yes = @XGETTEXT_015@
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
+MSGMERGE = msgmerge
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
+
+.po.mo:
+ @echo "$(MSGFMT) -c -o $@ $<"; \
+ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
+
+.po.gmo:
+ @lang=`echo $* | sed -e 's,.*/,,'`; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
+ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
+
+.sin.sed:
+ sed -e '/^#/d' $< > t-$@
+ mv t-$@ $@
+
+
+all: check-macro-version all-@USE_NLS@
+
+all-yes: stamp-po
+all-no:
+
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+check-macro-version:
+ @test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
+ || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
+ exit 1; \
+ }
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, stamp-po is a nop (i.e. a phony target).
+
+# stamp-po is a timestamp denoting the last time at which the CATALOGS have
+# been loosely updated. Its purpose is that when a developer or translator
+# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
+# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
+# invocations of "make" will do nothing. This timestamp would not be necessary
+# if updating the $(CATALOGS) would always touch them; however, the rule for
+# $(POFILES) has been designed to not touch files that don't need to be
+# changed.
+stamp-po: $(srcdir)/$(DOMAIN).pot
+ test ! -f $(srcdir)/$(DOMAIN).pot || \
+ test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+ @test ! -f $(srcdir)/$(DOMAIN).pot || { \
+ echo "touch stamp-po" && \
+ echo timestamp > stamp-poT && \
+ mv stamp-poT stamp-po; \
+ }
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+ if LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null | grep -v 'libtool:' >/dev/null; then \
+ package_gnu='GNU '; \
+ else \
+ package_gnu=''; \
+ fi; \
+ if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+ msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+ else \
+ msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+ fi; \
+ case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
+ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+ --files-from=$(srcdir)/POTFILES.in \
+ --copyright-holder='$(COPYRIGHT_HOLDER)' \
+ --msgid-bugs-address="$$msgid_bugs_address" \
+ ;; \
+ *) \
+ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+ --files-from=$(srcdir)/POTFILES.in \
+ --copyright-holder='$(COPYRIGHT_HOLDER)' \
+ --package-name="$${package_gnu}@PACKAGE@" \
+ --package-version='@VERSION@' \
+ --msgid-bugs-address="$$msgid_bugs_address" \
+ ;; \
+ esac
+ test ! -f $(DOMAIN).po || { \
+ if test -f $(srcdir)/$(DOMAIN).pot; then \
+ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+ sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+ if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+ else \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ else \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ }
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+ $(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(srcdir)/$(DOMAIN).pot
+ @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+ if test -f "$(srcdir)/$${lang}.po"; then \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
+ cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \
+ else \
+ $(MAKE) $${lang}.po-create; \
+ fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ $(INSTALL_DATA) $(srcdir)/$$file \
+ $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ for file in Makevars; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+install-data-no: all
+install-data-yes: all
+ $(mkdir_p) $(DESTDIR)$(datadir)
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkdir_p) $(DESTDIR)$$dir; \
+ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+ fi; \
+ done; \
+ done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+ else \
+ : ; \
+ fi
+installdirs-data-no:
+installdirs-data-yes:
+ $(mkdir_p) $(DESTDIR)$(datadir)
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkdir_p) $(DESTDIR)$$dir; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ fi; \
+ done; \
+ done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+uninstall-data-no:
+uninstall-data-yes:
+ catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ done; \
+ done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+mostlyclean:
+ rm -f remove-potcdate.sed
+ rm -f stamp-poT
+ rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+ rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+ rm -f Makefile Makefile.in POTFILES *.mo
+
+maintainer-clean: distclean
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+ rm -f stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+ $(MAKE) update-po
+ @$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: stamp-po $(DISTFILES)
+ dists="$(DISTFILES)"; \
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ dists="$$dists Makevars.template"; \
+ fi; \
+ if test -f $(srcdir)/$(DOMAIN).pot; then \
+ dists="$$dists $(DOMAIN).pot stamp-po"; \
+ fi; \
+ if test -f $(srcdir)/ChangeLog; then \
+ dists="$$dists ChangeLog"; \
+ fi; \
+ for i in 0 1 2 3 4 5 6 7 8 9; do \
+ if test -f $(srcdir)/ChangeLog.$$i; then \
+ dists="$$dists ChangeLog.$$i"; \
+ fi; \
+ done; \
+ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+ for file in $$dists; do \
+ if test -f $$file; then \
+ cp -p $$file $(distdir) || exit 1; \
+ else \
+ cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+ fi; \
+ done
+
+update-po: Makefile
+ $(MAKE) $(DOMAIN).pot-update
+ test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+ $(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+ @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+ echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+ exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+ @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+ if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+ cd $(srcdir); \
+ if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "msgmerge for $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+ @:
+
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
+ cd $(top_builddir) \
+ && $(SHELL) ./config.status $(subdir)/$@.in po-directories
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+# Makefile variables for PO directory in any package using GNU gettext.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = ..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ --flag='debuga:1:c-format'
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding
+# package. (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.) Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright. The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Free Software Foundation, Inc.
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+# in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+# understood.
+# - Strings which make invalid assumptions about notation of date, time or
+# money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS = fmarchal@users.sourceforge.net
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used. It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
--- /dev/null
+auth.c
+authfail.c
+btree_cache.c
+charset.c
+convlog.c
+css.c
+dansguardian_log.c
+dansguardian_report.c
+datafile.c
+decomp.c
+denied.c
+download.c
+email.c
+exclude.c
+getconf.c
+grepday.c
+html.c
+index.c
+indexonly.c
+ip2name.c
+language.c
+lastlog.c
+log.c
+realtime.c
+repday.c
+report.c
+siteuser.c
+smartfilter.c
+sort.c
+splitlog.c
+squidguard_log.c
+squidguard_report.c
+topsites.c
+topuser.c
+totday.c
+totger.c
+usage.c
+useragent.c
+usertab.c
+util.c
--- /dev/null
+# Special Makefile rules for English message catalogs with quotation marks.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en@quot.po-create:
+ $(MAKE) en@quot.po-update
+en@boldquot.po-create:
+ $(MAKE) en@boldquot.po-update
+
+en@quot.po-update: en@quot.po-update-en
+en@boldquot.po-update: en@boldquot.po-update-en
+
+.insert-header.po-update-en:
+ @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+ if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ ll=`echo $$lang | sed -e 's/@.*//'`; \
+ LC_ALL=C; export LC_ALL; \
+ cd $(srcdir); \
+ if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "creation of $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+en@quot.insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
+
+en@boldquot.insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+ rm -f *.insert-header
--- /dev/null
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
+s/“/“\e[1m/g
+s/”/\e[0m”/g
+s/‘/‘\e[1m/g
+s/’/\e[0m’/g
--- /dev/null
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+# This catalog furthermore displays the text between the quotation marks in
+# bold face, assuming the VT100/XTerm escape sequences.
+#
--- /dev/null
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
--- /dev/null
+# Sed script that inserts the file called HEADER before the header entry.
+#
+# At each occurrence of a line starting with "msgid ", we execute the following
+# commands. At the first occurrence, insert the file. At the following
+# occurrences, do nothing. The distinction between the first and the following
+# occurrences is achieved by looking at the hold space.
+/^msgid /{
+x
+# Test if the hold space is empty.
+s/m/m/
+ta
+# Yes it was empty. First occurrence. Read the file.
+r HEADER
+# Output the file's contents by reading the next line. But don't lose the
+# current line while doing this.
+g
+N
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
--- /dev/null
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
--- /dev/null
+# Sed script that remove the POT-Creation-Date line in the header entry
+# from a POT file.
+#
+# The distinction between the first and the following occurrences of the
+# pattern is achieved by looking at the hold space.
+/^"POT-Creation-Date: .*"$/{
+x
+# Test if the hold space is empty.
+s/P/P/
+ta
+# Yes it was empty. First occurrence. Remove the line.
+g
+d
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
if (n<=0) return;
calls=backtrace_symbols(buffer,n);
if (calls) {
- fprintf(stderr,"SARG: getword backtrace:\n");
+ debuga(_("getword backtrace:"));
for (i=0 ; i<n ; i++) {
fprintf(stderr,"SARG: %d:%s\n",i+1,calls[i]);
}
err=stat(dname,&st);
#endif
if (err) {
- fprintf(stderr,"SARG: cannot stat %s\n",dname);
+ debuga(_("cannot stat %s"),dname);
exit(1);
}
if (S_ISREG(st.st_mode)) {
projects / thirdparty / sarg.git / commitdiff
