loop: try to handle loop aio command via NOWAIT IO first

Try to handle loop aio command via NOWAIT IO first, then we can avoid to
queue the aio command into workqueue. This is usually one big win in
case that FS block mapping is stable, Mikulas verified [1] that this way
improves IO perf by close to 5X in 12jobs sequential read/write test,
in which FS block mapping is just stable.

Fallback to workqueue in case of -EAGAIN. This way may bring a little
cost from the 1st retry, but when running the following write test over
loop/sparse_file, the actual effect on randwrite is obvious:

```
truncate -s 4G 1.img    #1.img is created on XFS/virtio-scsi
losetup -f 1.img --direct-io=on
fio --direct=1 --bs=4k --runtime=40 --time_based --numjobs=1 --ioengine=libaio \
	--iodepth=16 --group_reporting=1 --filename=/dev/loop0 -name=job --rw=$RW
```

- RW=randwrite: obvious IOPS drop observed
- RW=write: a little drop(%5 - 10%)

This perf drop on randwrite over sparse file will be addressed in the
following patch.

BLK_MQ_F_BLOCKING has to be set for calling into .read_iter() or .write_iter()
which might sleep even though it is NOWAIT, and the only effect is that rcu read
lock is replaced with srcu read lock.

Link: https://lore.kernel.org/linux-block/a8e5c76a-231f-07d1-a394-847de930f638@redhat.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index c45635e48164b15d87979c5fc97447a78efa7671..94478c02fea6bbfa9043e6bc324affe556d954a8 100644 (file)
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -90,6 +90,8 @@ struct loop_cmd {
 #define LOOP_IDLE_WORKER_TIMEOUT (60 * HZ)
 #define LOOP_DEFAULT_HW_Q_DEPTH 128
 
+static void loop_queue_work(struct loop_device *lo, struct loop_cmd *cmd);
+
 static DEFINE_IDR(loop_index_idr);
 static DEFINE_MUTEX(loop_ctl_mutex);
 static DEFINE_MUTEX(loop_validate_mutex);
@@ -321,6 +323,15 @@ static void lo_rw_aio_do_completion(struct loop_cmd *cmd)
 
        if (!atomic_dec_and_test(&cmd->ref))
                return;
+
+       /* -EAGAIN could be returned from bdev's ->ki_complete */
+       if (cmd->ret == -EAGAIN) {
+               struct loop_device *lo = rq->q->queuedata;
+
+               loop_queue_work(lo, cmd);
+               return;
+       }
+
        kfree(cmd->bvec);
        cmd->bvec = NULL;
        if (req_op(rq) == REQ_OP_WRITE)
@@ -430,22 +441,51 @@ static int lo_submit_rw_aio(struct loop_device *lo, struct loop_cmd *cmd,
        return ret;
 }
 
+static bool lo_backfile_support_nowait(const struct loop_device *lo)
+{
+       return lo->lo_backing_file->f_mode & FMODE_NOWAIT;
+}
+
 static int lo_rw_aio(struct loop_device *lo, struct loop_cmd *cmd,
                     loff_t pos, int rw)
 {
        int nr_bvec = lo_cmd_nr_bvec(cmd);
        int ret;
 
-       ret = lo_rw_aio_prep(lo, cmd, nr_bvec, pos);
-       if (unlikely(ret))
-               return ret;
+       /* prepared already if we have tried nowait */
+       if (!cmd->use_aio || !lo_backfile_support_nowait(lo)) {
+               ret = lo_rw_aio_prep(lo, cmd, nr_bvec, pos);
+               if (unlikely(ret))
+                       goto fail;
+       }
 
+       cmd->iocb.ki_flags &= ~IOCB_NOWAIT;
        ret = lo_submit_rw_aio(lo, cmd, nr_bvec, rw);
+fail:
        if (ret != -EIOCBQUEUED)
                lo_rw_aio_complete(&cmd->iocb, ret);
        return -EIOCBQUEUED;
 }
 
+static int lo_rw_aio_nowait(struct loop_device *lo, struct loop_cmd *cmd,
+                           int rw)
+{
+       struct request *rq = blk_mq_rq_from_pdu(cmd);
+       loff_t pos = ((loff_t) blk_rq_pos(rq) << 9) + lo->lo_offset;
+       int nr_bvec = lo_cmd_nr_bvec(cmd);
+       int ret = lo_rw_aio_prep(lo, cmd, nr_bvec, pos);
+
+       if (unlikely(ret))
+               goto fail;
+
+       cmd->iocb.ki_flags |= IOCB_NOWAIT;
+       ret = lo_submit_rw_aio(lo, cmd, nr_bvec, rw);
+fail:
+       if (ret != -EIOCBQUEUED && ret != -EAGAIN)
+               lo_rw_aio_complete(&cmd->iocb, ret);
+       return ret;
+}
+
 static int do_req_filebacked(struct loop_device *lo, struct request *rq)
 {
        struct loop_cmd *cmd = blk_mq_rq_to_pdu(rq);
@@ -1907,6 +1947,7 @@ static blk_status_t loop_queue_rq(struct blk_mq_hw_ctx *hctx,
        struct request *rq = bd->rq;
        struct loop_cmd *cmd = blk_mq_rq_to_pdu(rq);
        struct loop_device *lo = rq->q->queuedata;
+       int rw = 0;
 
        blk_mq_start_request(rq);
 
@@ -1919,9 +1960,25 @@ static blk_status_t loop_queue_rq(struct blk_mq_hw_ctx *hctx,
        case REQ_OP_WRITE_ZEROES:
                cmd->use_aio = false;
                break;
-       default:
+       case REQ_OP_READ:
+               rw = ITER_DEST;
                cmd->use_aio = lo->lo_flags & LO_FLAGS_DIRECT_IO;
                break;
+       case REQ_OP_WRITE:
+               rw = ITER_SOURCE;
+               cmd->use_aio = lo->lo_flags & LO_FLAGS_DIRECT_IO;
+               break;
+       default:
+               return BLK_STS_IOERR;
+       }
+
+       /* try NOWAIT if the backing file supports the mode */
+       if (cmd->use_aio && lo_backfile_support_nowait(lo)) {
+               int res = lo_rw_aio_nowait(lo, cmd, rw);
+
+               if (res != -EAGAIN && res != -EOPNOTSUPP)
+                       return BLK_STS_OK;
+               /* fallback to workqueue for handling aio */
        }
 
        loop_queue_work(lo, cmd);
@@ -2073,7 +2130,8 @@ static int loop_add(int i)
        lo->tag_set.queue_depth = hw_queue_depth;
        lo->tag_set.numa_node = NUMA_NO_NODE;
        lo->tag_set.cmd_size = sizeof(struct loop_cmd);
-       lo->tag_set.flags = BLK_MQ_F_STACKING | BLK_MQ_F_NO_SCHED_BY_DEFAULT;
+       lo->tag_set.flags = BLK_MQ_F_STACKING | BLK_MQ_F_NO_SCHED_BY_DEFAULT |
+               BLK_MQ_F_BLOCKING;
        lo->tag_set.driver_data = lo;
 
        err = blk_mq_alloc_tag_set(&lo->tag_set);