+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
Kernel driver bh1770glc
=======================
Supported chips:
-ROHM BH1770GLC
-OSRAM SFH7770
+
+- ROHM BH1770GLC
+- OSRAM SFH7770
Data sheet:
Not freely available
RO - shows detected chip type and version
power_state
- RW - enable / disable chip. Uses counting logic
- 1 enables the chip
- 0 disables the chip
+ RW - enable / disable chip
+
+ Uses counting logic
+
+ - 1 enables the chip
+ - 0 disables the chip
lux0_input
RO - measured lux value
+
sysfs_notify called when threshold interrupt occurs
lux0_sensor_range
RO - supported measurement rates
lux0_thresh_above_value
- RW - HI level threshold value. All results above the value
+ RW - HI level threshold value
+
+ All results above the value
trigs an interrupt. 65535 (i.e. sensor_range) disables the above
interrupt.
lux0_thresh_below_value
- RW - LO level threshold value. All results below the value
+ RW - LO level threshold value
+
+ All results below the value
trigs an interrupt. 0 disables the below interrupt.
lux0_calibscale
- RW - calibration value. Set to neutral value by default.
+ RW - calibration value
+
+ Set to neutral value by default.
Output results are multiplied with calibscale / calibscale_default
value.
prox0_raw
RO - measured proximity value
+
sysfs_notify called when threshold interrupt occurs
prox0_sensor_range
RO - prox0_raw max value
prox0_raw_en
- RW - enable / disable proximity - uses counting logic
- 1 enables the proximity
- 0 disables the proximity
+ RW - enable / disable proximity
+
+ Uses counting logic
+
+ - 1 enables the proximity
+ - 0 disables the proximity
prox0_thresh_above_count
RW - number of proximity interrupts needed before triggering the event
prox0_rate_above
RW - Measurement rate (in Hz) when the level is above threshold
- i.e. when proximity on has been reported.
+ i.e. when proximity on has been reported.
prox0_rate_below
RW - Measurement rate (in Hz) when the level is below threshold
- i.e. when proximity off has been reported.
+ i.e. when proximity off has been reported.
prox0_rate_avail
RO - Supported proximity measurement rates in Hz
prox0_thresh_above0_value
RW - threshold level which trigs proximity events.
+
Filtered by persistence filter (prox0_thresh_above_count)
prox0_thresh_above1_value