x86/mce: Cleanup bank processing on init

Unify the bank preparation into __mcheck_cpu_init_clear_banks(), rename that
function to what it does now - prepares banks. Do this so that generic and
vendor banks init goes first so that settings done during that init can take
effect before the first bank polling takes place.

Move __mcheck_cpu_check_banks() into __mcheck_cpu_init_prepare_banks() as it
already loops over the banks.

The MCP_DONTLOG flag is no longer needed, since the MCA polling function is
now called only if boot-time logging should be done.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250825-wip-mca-updates-v5-5-865768a2eef8@amd.com

diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 752802bf966b9ca726e6bcc3e509b6eca589df2e..3224f3862dc86f537fff7ada05465472605993bb 100644 (file)
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -290,8 +290,7 @@ DECLARE_PER_CPU(mce_banks_t, mce_poll_banks);
 enum mcp_flags {
        MCP_TIMESTAMP   = BIT(0),       /* log time stamp */
        MCP_UC          = BIT(1),       /* log uncorrected errors */
-       MCP_DONTLOG     = BIT(2),       /* only clear, don't log */
-       MCP_QUEUE_LOG   = BIT(3),       /* only queue to genpool */
+       MCP_QUEUE_LOG   = BIT(2),       /* only queue to genpool */
 };
 
 void machine_check_poll(enum mcp_flags flags, mce_banks_t *b);

diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 4da4eab56c81de4b3854a3e0a62b0058a134f035..311876e3f3f4752ce0ff99be7d5472f97e1a735e 100644 (file)
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -807,9 +807,6 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
                continue;
 
 log_it:
-               if (flags & MCP_DONTLOG)
-                       goto clear_it;
-
                mce_read_aux(&err, i);
                m->severity = mce_severity(m, NULL, NULL, false);
                /*
@@ -1812,7 +1809,7 @@ static void __mcheck_cpu_mce_banks_init(void)
                /*
                 * Init them all, __mcheck_cpu_apply_quirks() is going to apply
                 * the required vendor quirks before
-                * __mcheck_cpu_init_clear_banks() does the final bank setup.
+                * __mcheck_cpu_init_prepare_banks() does the final bank setup.
                 */
                b->ctl = -1ULL;
                b->init = true;
@@ -1851,21 +1848,8 @@ static void __mcheck_cpu_cap_init(void)
 
 static void __mcheck_cpu_init_generic(void)
 {
-       enum mcp_flags m_fl = 0;
-       mce_banks_t all_banks;
        u64 cap;
 
-       if (!mca_cfg.bootlog)
-               m_fl = MCP_DONTLOG;
-
-       /*
-        * Log the machine checks left over from the previous reset. Log them
-        * only, do not start processing them. That will happen in mcheck_late_init()
-        * when all consumers have been registered on the notifier chain.
-        */
-       bitmap_fill(all_banks, MAX_NR_BANKS);
-       machine_check_poll(MCP_UC | MCP_QUEUE_LOG | m_fl, &all_banks);
-
        cr4_set_bits(X86_CR4_MCE);
 
        rdmsrq(MSR_IA32_MCG_CAP, cap);
@@ -1873,36 +1857,23 @@ static void __mcheck_cpu_init_generic(void)
                wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
 }
 
-static void __mcheck_cpu_init_clear_banks(void)
+static void __mcheck_cpu_init_prepare_banks(void)
 {
        struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array);
+       u64 msrval;
        int i;
 
-       for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
-               struct mce_bank *b = &mce_banks[i];
+       /*
+        * Log the machine checks left over from the previous reset. Log them
+        * only, do not start processing them. That will happen in mcheck_late_init()
+        * when all consumers have been registered on the notifier chain.
+        */
+       if (mca_cfg.bootlog) {
+               mce_banks_t all_banks;
 
-               if (!b->init)
-                       continue;
-               wrmsrq(mca_msr_reg(i, MCA_CTL), b->ctl);
-               wrmsrq(mca_msr_reg(i, MCA_STATUS), 0);
+               bitmap_fill(all_banks, MAX_NR_BANKS);
+               machine_check_poll(MCP_UC | MCP_QUEUE_LOG, &all_banks);
        }
-}
-
-/*
- * Do a final check to see if there are any unused/RAZ banks.
- *
- * This must be done after the banks have been initialized and any quirks have
- * been applied.
- *
- * Do not call this from any user-initiated flows, e.g. CPU hotplug or sysfs.
- * Otherwise, a user who disables a bank will not be able to re-enable it
- * without a system reboot.
- */
-static void __mcheck_cpu_check_banks(void)
-{
-       struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array);
-       u64 msrval;
-       int i;
 
        for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
                struct mce_bank *b = &mce_banks[i];
@@ -1910,6 +1881,9 @@ static void __mcheck_cpu_check_banks(void)
                if (!b->init)
                        continue;
 
+               wrmsrq(mca_msr_reg(i, MCA_CTL), b->ctl);
+               wrmsrq(mca_msr_reg(i, MCA_STATUS), 0);
+
                rdmsrq(mca_msr_reg(i, MCA_CTL), msrval);
                b->init = !!msrval;
        }
@@ -2314,8 +2288,7 @@ void mcheck_cpu_init(struct cpuinfo_x86 *c)
        __mcheck_cpu_init_early(c);
        __mcheck_cpu_init_generic();
        __mcheck_cpu_init_vendor(c);
-       __mcheck_cpu_init_clear_banks();
-       __mcheck_cpu_check_banks();
+       __mcheck_cpu_init_prepare_banks();
        __mcheck_cpu_setup_timer();
 }
 
@@ -2483,7 +2456,7 @@ static void mce_syscore_resume(void)
 {
        __mcheck_cpu_init_generic();
        __mcheck_cpu_init_vendor(raw_cpu_ptr(&cpu_info));
-       __mcheck_cpu_init_clear_banks();
+       __mcheck_cpu_init_prepare_banks();
 }
 
 static struct syscore_ops mce_syscore_ops = {
@@ -2501,7 +2474,7 @@ static void mce_cpu_restart(void *data)
        if (!mce_available(raw_cpu_ptr(&cpu_info)))
                return;
        __mcheck_cpu_init_generic();
-       __mcheck_cpu_init_clear_banks();
+       __mcheck_cpu_init_prepare_banks();
        __mcheck_cpu_init_timer();
 }