CONFIG_ARM_ERRATA_742230
CONFIG_ARM_ERRATA_743622
CONFIG_ARM_ERRATA_751472
+ CONFIG_ARM_ERRATA_794072
+ CONFIG_ARM_ERRATA_761320
If set, the workarounds for these ARM errata are applied early
during U-Boot startup. Note that these options force the
The default command configuration includes all commands
except those marked below with a "*".
+ CONFIG_CMD_AES AES 128 CBC encrypt/decrypt
CONFIG_CMD_ASKENV * ask for env variable
CONFIG_CMD_BDI bdinfo
CONFIG_CMD_BEDBUG * Include BedBug Debugger
CONFIG_CMD_CDP * Cisco Discover Protocol support
CONFIG_CMD_MFSL * Microblaze FSL support
CONFIG_CMD_XIMG Load part of Multi Image
-
+ CONFIG_CMD_UUID * Generate random UUID or GUID string
EXAMPLE: If you want all functions except of network
support you can write:
this to the maximum filesize (in bytes) for the buffer.
Default is 4 MiB if undefined.
+ DFU_DEFAULT_POLL_TIMEOUT
+ Poll timeout [ms], is the timeout a device can send to the
+ host. The host must wait for this timeout before sending
+ a subsequent DFU_GET_STATUS request to the device.
+
+ DFU_MANIFEST_POLL_TIMEOUT
+ Poll timeout [ms], which the device sends to the host when
+ entering dfuMANIFEST state. Host waits this timeout, before
+ sending again an USB request to the device.
+
- Journaling Flash filesystem support:
CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
CONFIG_JFFS2_NAND_DEV
obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
# command
+ obj-$(CONFIG_CMD_AES) += cmd_aes.o
obj-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o
obj-$(CONFIG_SOURCE) += cmd_source.o
obj-$(CONFIG_CMD_SOURCE) += cmd_source.o
obj-$(CONFIG_CMD_UBIFS) += cmd_ubifs.o
obj-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o
obj-$(CONFIG_CMD_UNZIP) += cmd_unzip.o
+ifdef CONFIG_LZMA
+obj-$(CONFIG_CMD_LZMADEC) += cmd_lzmadec.o
+endif
ifdef CONFIG_CMD_USB
obj-y += cmd_usb.o
obj-y += usb.o usb_hub.o
* SPDX-License-Identifier: GPL-2.0+
*/
+ #ifndef USE_HOSTCC
#include <common.h>
#include <serial.h>
#include <libfdt.h>
COMPAT(SAMSUNG_EXYNOS5_USB3_PHY, "samsung,exynos5250-usb3-phy"),
COMPAT(SAMSUNG_EXYNOS_TMU, "samsung,exynos-tmu"),
COMPAT(SAMSUNG_EXYNOS_FIMD, "samsung,exynos-fimd"),
+ COMPAT(SAMSUNG_EXYNOS_MIPI_DSI, "samsung,exynos-mipi-dsi"),
COMPAT(SAMSUNG_EXYNOS5_DP, "samsung,exynos5-dp"),
COMPAT(SAMSUNG_EXYNOS5_DWMMC, "samsung,exynos5250-dwmmc"),
+ COMPAT(SAMSUNG_EXYNOS_MMC, "samsung,exynos-mmc"),
COMPAT(SAMSUNG_EXYNOS_SERIAL, "samsung,exynos4210-uart"),
COMPAT(MAXIM_MAX77686_PMIC, "maxim,max77686_pmic"),
COMPAT(GENERIC_SPI_FLASH, "spi-flash"),
return 0;
}
+ #else
+ #include "libfdt.h"
+ #include "fdt_support.h"
+
+ int fdtdec_get_int(const void *blob, int node, const char *prop_name,
+ int default_val)
+ {
+ const int *cell;
+ int len;
+
+ cell = fdt_getprop_w((void *)blob, node, prop_name, &len);
+ if (cell && len >= sizeof(int)) {
+ int val = fdt32_to_cpu(cell[0]);
+
+ return val;
+ }
+ return default_val;
+ }
+ #endif