--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/fsl,mc13xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MC13xxx Power Management Integrated Circuits (PMIC)
+
+maintainers:
+ - Alexander Kurz <akurz@blala.de>
+
+description: >
+ The MC13xxx PMIC series consists of the three models MC13783, MC13892
+ and MC34708 and provide regulators and other features like RTC, ADC,
+ LED, touchscreen, codec and input buttons.
+
+ Link to datasheets
+ https://www.nxp.com/docs/en/data-sheet/MC13783.pdf
+ https://www.nxp.com/docs/en/data-sheet/MC13892.pdf
+ https://www.nxp.com/docs/en/data-sheet/MC34708.pdf
+
+properties:
+ compatible:
+ enum:
+ - fsl,mc13783
+ - fsl,mc13892
+ - fsl,mc34708
+
+ reg:
+ description: I2C slave address or SPI chip select number.
+ maxItems: 1
+
+ spi-max-frequency: true
+
+ spi-cs-high: true
+
+ system-power-controller: true
+
+ interrupts:
+ maxItems: 1
+
+ leds:
+ type: object
+ $ref: /schemas/leds/common.yaml#
+
+ properties:
+ reg:
+ description: |
+ One of
+ MC13783 LED IDs
+ 0: Main display
+ 1: AUX display
+ 2: Keypad
+ 3: Red 1
+ 4: Green 1
+ 5: Blue 1
+ 6: Red 2
+ 7: Green 2
+ 8: Blue 2
+ 9: Red 3
+ 10: Green 3
+ 11: Blue 3
+
+ MC13892 LED IDs
+ 0: Main display
+ 1: AUX display
+ 2: Keypad
+ 3: Red
+ 4: Green
+ 5: Blue
+
+ MC34708 LED IDs
+ 0: Charger Red
+ 1: Charger Green
+ maxItems: 1
+
+ led-control:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ Setting for LED-Control register array length depends on model,
+ mc13783: 6, mc13892: 4, mc34708: 1
+
+ regulators:
+ type: object
+
+ additionalProperties:
+ type: object
+
+ description: |
+ List of child nodes specifying the regulators, depending on chip variant.
+ Each child node is defined using the standard binding for regulators and
+ the optional regulator properties defined below.
+
+ fsl,mc13xxx-uses-adc:
+ type: boolean
+ description: Indicate the ADC is being used
+
+ fsl,mc13xxx-uses-codec:
+ type: boolean
+ description: Indicate the Audio Codec is being used
+
+ fsl,mc13xxx-uses-rtc:
+ type: boolean
+ description: Indicate the RTC is being used
+
+ fsl,mc13xxx-uses-touch:
+ type: boolean
+ description: Indicate the touchscreen controller is being used
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,mc13783
+ then:
+ properties:
+ leds:
+ properties:
+ led-control:
+ minItems: 6
+ maxItems: 6
+ regulators:
+ patternProperties:
+ "^gpo[1-4]|pwgt[12]spi|sw[12][ab]|sw3|vaudio|vcam|vdig|vesim|vgen|viohi|violo|vmmc[12]|vrf[12]|vrfbg|vrfcp|vrfdig|vrfref|vsim|vvib$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ unevaluatedProperties: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,mc13892
+ then:
+ properties:
+ leds:
+ properties:
+ led-control:
+ minItems: 4
+ maxItems: 4
+ regulators:
+ patternProperties:
+ "^gpo[1-4]|pwgt[12]spi|sw[1-4]|swbst|vaudio|vcam|vcoincell|vdig|vgen[1-3]|viohi|vpll|vsd|vusb|vusb2|vvideo$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ unevaluatedProperties: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,mc34708
+ then:
+ properties:
+ leds:
+ properties:
+ led-control:
+ minItems: 1
+ maxItems: 1
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/leds/common.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic: mc13892@0 {
+ compatible = "fsl,mc13892";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cs-high;
+ interrupt-parent = <&gpio0>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,mc13xxx-uses-rtc;
+ fsl,mc13xxx-uses-adc;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ led-control = <0x000 0x000 0x0e0 0x000>;
+
+ sysled@3 {
+ reg = <3>;
+ label = "system:red:live";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ regulators {
+ sw1_reg: sw1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+++ /dev/null
-* Freescale MC13783/MC13892 Power Management Integrated Circuit (PMIC)
-
-Required properties:
-- compatible : Should be "fsl,mc13783" or "fsl,mc13892"
-
-Optional properties:
-- fsl,mc13xxx-uses-adc : Indicate the ADC is being used
-- fsl,mc13xxx-uses-codec : Indicate the Audio Codec is being used
-- fsl,mc13xxx-uses-rtc : Indicate the RTC is being used
-- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
-
-Sub-nodes:
-- codec: Contain the Audio Codec node.
- - adc-port: Contain PMIC SSI port number used for ADC.
- - dac-port: Contain PMIC SSI port number used for DAC.
-- leds : Contain the led nodes and initial register values in property
- "led-control". Number of register depends of used IC, for MC13783 is 6,
- for MC13892 is 4, for MC34708 is 1. See datasheet for bits definitions of
- these registers.
- - #address-cells: Must be 1.
- - #size-cells: Must be 0.
- Each led node should contain "reg", which used as LED ID (described below).
- Optional properties "label" and "linux,default-trigger" is described in
- Documentation/devicetree/bindings/leds/common.txt.
-- regulators : Contain the regulator nodes. The regulators are bound using
- their names as listed below with their registers and bits for enabling.
-
-MC13783 LED IDs:
- 0 : Main display
- 1 : AUX display
- 2 : Keypad
- 3 : Red 1
- 4 : Green 1
- 5 : Blue 1
- 6 : Red 2
- 7 : Green 2
- 8 : Blue 2
- 9 : Red 3
- 10 : Green 3
- 11 : Blue 3
-
-MC13892 LED IDs:
- 0 : Main display
- 1 : AUX display
- 2 : Keypad
- 3 : Red
- 4 : Green
- 5 : Blue
-
-MC34708 LED IDs:
- 0 : Charger Red
- 1 : Charger Green
-
-MC13783 regulators:
- sw1a : regulator SW1A (register 24, bit 0)
- sw1b : regulator SW1B (register 25, bit 0)
- sw2a : regulator SW2A (register 26, bit 0)
- sw2b : regulator SW2B (register 27, bit 0)
- sw3 : regulator SW3 (register 29, bit 20)
- vaudio : regulator VAUDIO (register 32, bit 0)
- viohi : regulator VIOHI (register 32, bit 3)
- violo : regulator VIOLO (register 32, bit 6)
- vdig : regulator VDIG (register 32, bit 9)
- vgen : regulator VGEN (register 32, bit 12)
- vrfdig : regulator VRFDIG (register 32, bit 15)
- vrfref : regulator VRFREF (register 32, bit 18)
- vrfcp : regulator VRFCP (register 32, bit 21)
- vsim : regulator VSIM (register 33, bit 0)
- vesim : regulator VESIM (register 33, bit 3)
- vcam : regulator VCAM (register 33, bit 6)
- vrfbg : regulator VRFBG (register 33, bit 9)
- vvib : regulator VVIB (register 33, bit 11)
- vrf1 : regulator VRF1 (register 33, bit 12)
- vrf2 : regulator VRF2 (register 33, bit 15)
- vmmc1 : regulator VMMC1 (register 33, bit 18)
- vmmc2 : regulator VMMC2 (register 33, bit 21)
- gpo1 : regulator GPO1 (register 34, bit 6)
- gpo2 : regulator GPO2 (register 34, bit 8)
- gpo3 : regulator GPO3 (register 34, bit 10)
- gpo4 : regulator GPO4 (register 34, bit 12)
- pwgt1spi : regulator PWGT1SPI (register 34, bit 15)
- pwgt2spi : regulator PWGT2SPI (register 34, bit 16)
-
-MC13892 regulators:
- vcoincell : regulator VCOINCELL (register 13, bit 23)
- sw1 : regulator SW1 (register 24, bit 0)
- sw2 : regulator SW2 (register 25, bit 0)
- sw3 : regulator SW3 (register 26, bit 0)
- sw4 : regulator SW4 (register 27, bit 0)
- swbst : regulator SWBST (register 29, bit 20)
- vgen1 : regulator VGEN1 (register 32, bit 0)
- viohi : regulator VIOHI (register 32, bit 3)
- vdig : regulator VDIG (register 32, bit 9)
- vgen2 : regulator VGEN2 (register 32, bit 12)
- vpll : regulator VPLL (register 32, bit 15)
- vusb2 : regulator VUSB2 (register 32, bit 18)
- vgen3 : regulator VGEN3 (register 33, bit 0)
- vcam : regulator VCAM (register 33, bit 6)
- vvideo : regulator VVIDEO (register 33, bit 12)
- vaudio : regulator VAUDIO (register 33, bit 15)
- vsd : regulator VSD (register 33, bit 18)
- gpo1 : regulator GPO1 (register 34, bit 6)
- gpo2 : regulator GPO2 (register 34, bit 8)
- gpo3 : regulator GPO3 (register 34, bit 10)
- gpo4 : regulator GPO4 (register 34, bit 12)
- pwgt1spi : regulator PWGT1SPI (register 34, bit 15)
- pwgt2spi : regulator PWGT2SPI (register 34, bit 16)
- vusb : regulator VUSB (register 50, bit 3)
-
- The bindings details of individual regulator device can be found in:
- Documentation/devicetree/bindings/regulator/regulator.txt
-
-Examples:
-
-ecspi@70010000 { /* ECSPI1 */
- cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
- <&gpio4 25 0>; /* GPIO4_25 */
-
- pmic: mc13892@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mc13892";
- spi-max-frequency = <6000000>;
- reg = <0>;
- interrupt-parent = <&gpio0>;
- interrupts = <8>;
-
- leds {
- #address-cells = <1>;
- #size-cells = <0>;
- led-control = <0x000 0x000 0x0e0 0x000>;
-
- sysled@3 {
- reg = <3>;
- label = "system:red:live";
- linux,default-trigger = "heartbeat";
- };
- };
-
- regulators {
- sw1_reg: mc13892__sw1 {
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1375000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw2_reg: mc13892__sw2 {
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1850000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-};
projects / thirdparty / kernel / stable.git / commitdiff
