arm64: dts: qcom: sm8150: fix USB DP/DM HS PHY interrupts

The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.

A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.

Fixes: 54524b6987d1 ("arm64: dts: qcom: sm8150: fix USB wakeup interrupt types")
Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@vger.kernel.org      # 5.10
Cc: Jack Pham <quic_jackp@quicinc.com>
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 3283da81ee46257719b0b1fd38a79a4e644f216d..7f67d7d0cfff4d4f4aa21426767b6afb656e0f51 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3547,10 +3547,10 @@
                                          <&gcc GCC_USB30_PRIM_MASTER_CLK>;
                        assigned-clock-rates = <19200000>, <200000000>;
 
-                       interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>,
-                                    <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>;
+                       interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&intc GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+                                             <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
                        interrupt-names = "hs_phy_irq", "ss_phy_irq",
                                          "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -3600,10 +3600,10 @@
                                          <&gcc GCC_USB30_SEC_MASTER_CLK>;
                        assigned-clock-rates = <19200000>, <200000000>;
 
-                       interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 490 IRQ_TYPE_EDGE_BOTH>,
-                                    <GIC_SPI 491 IRQ_TYPE_EDGE_BOTH>;
+                       interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&intc GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+                                             <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
                        interrupt-names = "hs_phy_irq", "ss_phy_irq",
                                          "dm_hs_phy_irq", "dp_hs_phy_irq";