--- /dev/null
+From 2685027fca387b602ae565bff17895188b803988 Mon Sep 17 00:00:00 2001
+From: Waiman Long <longman@redhat.com>
+Date: Wed, 27 Apr 2022 10:54:28 -0400
+Subject: cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: Waiman Long <longman@redhat.com>
+
+commit 2685027fca387b602ae565bff17895188b803988 upstream.
+
+There are 3 places where the cpu and node masks of the top cpuset can
+be initialized in the order they are executed:
+ 1) start_kernel -> cpuset_init()
+ 2) start_kernel -> cgroup_init() -> cpuset_bind()
+ 3) kernel_init_freeable() -> do_basic_setup() -> cpuset_init_smp()
+
+The first cpuset_init() call just sets all the bits in the masks.
+The second cpuset_bind() call sets cpus_allowed and mems_allowed to the
+default v2 values. The third cpuset_init_smp() call sets them back to
+v1 values.
+
+For systems with cgroup v2 setup, cpuset_bind() is called once. As a
+result, cpu and memory node hot add may fail to update the cpu and node
+masks of the top cpuset to include the newly added cpu or node in a
+cgroup v2 environment.
+
+For systems with cgroup v1 setup, cpuset_bind() is called again by
+rebind_subsystem() when the v1 cpuset filesystem is mounted as shown
+in the dmesg log below with an instrumented kernel.
+
+ [ 2.609781] cpuset_bind() called - v2 = 1
+ [ 3.079473] cpuset_init_smp() called
+ [ 7.103710] cpuset_bind() called - v2 = 0
+
+smp_init() is called after the first two init functions. So we don't
+have a complete list of active cpus and memory nodes until later in
+cpuset_init_smp() which is the right time to set up effective_cpus
+and effective_mems.
+
+To fix this cgroup v2 mask setup problem, the potentially incorrect
+cpus_allowed & mems_allowed setting in cpuset_init_smp() are removed.
+For cgroup v2 systems, the initial cpuset_bind() call will set the masks
+correctly. For cgroup v1 systems, the second call to cpuset_bind()
+will do the right setup.
+
+cc: stable@vger.kernel.org
+Signed-off-by: Waiman Long <longman@redhat.com>
+Tested-by: Feng Tang <feng.tang@intel.com>
+Reviewed-by: Michal Koutný <mkoutny@suse.com>
+Signed-off-by: Tejun Heo <tj@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ kernel/cgroup/cpuset.c | 7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+--- a/kernel/cgroup/cpuset.c
++++ b/kernel/cgroup/cpuset.c
+@@ -2403,8 +2403,11 @@ static struct notifier_block cpuset_trac
+ */
+ void __init cpuset_init_smp(void)
+ {
+- cpumask_copy(top_cpuset.cpus_allowed, cpu_active_mask);
+- top_cpuset.mems_allowed = node_states[N_MEMORY];
++ /*
++ * cpus_allowd/mems_allowed set to v2 values in the initial
++ * cpuset_bind() call will be reset to v1 values in another
++ * cpuset_bind() call when v1 cpuset is mounted.
++ */
+ top_cpuset.old_mems_allowed = top_cpuset.mems_allowed;
+
+ cpumask_copy(top_cpuset.effective_cpus, cpu_active_mask);
asoc-ops-validate-input-values-in-snd_soc_put_volsw_.patch
tcp-resalt-the-secret-every-10-seconds.patch
usb-cdc-wdm-fix-reading-stuck-on-device-close.patch
+usb-serial-pl2303-add-device-id-for-hp-lm930-display.patch
+usb-serial-qcserial-add-support-for-sierra-wireless-em7590.patch
+usb-serial-option-add-fibocom-l610-modem.patch
+usb-serial-option-add-fibocom-ma510-modem.patch
+cgroup-cpuset-remove-cpus_allowed-mems_allowed-setup-in-cpuset_init_smp.patch
--- /dev/null
+From 714adff9a6271b5f1664b04c944b598141ebfe73 Mon Sep 17 00:00:00 2001
+From: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
+Date: Mon, 25 Apr 2022 16:34:49 +0200
+Subject: USB: serial: option: add Fibocom L610 modem
+
+From: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
+
+commit 714adff9a6271b5f1664b04c944b598141ebfe73 upstream.
+
+The L610 modem has 3 USB configurations that are configurable via the AT
+command AT+GTUSBMODE={31,32,33} which make the modem enumerate with the
+following interfaces, respectively:
+
+31: Modem + NV + MOS + Diag + LOG + AT + AT
+32: ECM + Modem + NV + MOS + Diag + LOG + AT + AT
+33: RNDIS + Modem + NV + MOS + Diag + LOG + AT + AT
+
+A detailed description of the USB configuration for each mode follows:
+
++GTUSBMODE: 31
+--------------
+T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=124 Spd=480 MxCh= 0
+D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+P: Vendor=1782 ProdID=4d10 Rev= 0.00
+S: Manufacturer=FIBOCOM
+S: Product=L610
+C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=400mA
+I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
++GTUSBMODE: 32
+--------------
+T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=122 Spd=480 MxCh= 0
+D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+P: Vendor=1782 ProdID=4d11 Rev= 0.00
+S: Manufacturer=FIBOCOM
+S: Product=L610
+C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
+A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
+I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
+E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
+I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
+I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
+E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
++GTUSBMODE: 33
+--------------
+T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=126 Spd=480 MxCh= 0
+D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+P: Vendor=1782 ProdID=4d11 Rev= 0.00
+S: Manufacturer=FIBOCOM
+S: Product=L610
+C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
+A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
+I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
+E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms
+I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
+E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
+E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
+Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/option.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -2125,6 +2125,8 @@ static const struct usb_device_id option
+ .driver_info = RSVD(3) },
+ { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 (IOT version) */
+ .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
++ { USB_DEVICE(0x1782, 0x4d10) }, /* Fibocom L610 (AT mode) */
++ { USB_DEVICE_INTERFACE_CLASS(0x1782, 0x4d11, 0xff) }, /* Fibocom L610 (ECM/RNDIS mode) */
+ { USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */
+ .driver_info = RSVD(4) | RSVD(5) },
+ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */
--- /dev/null
+From 07989eb981d862f7f2be68d233d753f2e7ccc119 Mon Sep 17 00:00:00 2001
+From: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
+Date: Mon, 25 Apr 2022 16:34:50 +0200
+Subject: USB: serial: option: add Fibocom MA510 modem
+
+From: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
+
+commit 07989eb981d862f7f2be68d233d753f2e7ccc119 upstream.
+
+The MA510 modem has 3 USB configurations that are configurable via the AT
+command AT+GTUSBMODE={30,31,32} which make the modem enumerate with the
+following interfaces, respectively:
+
+30: Diag + QDSS + Modem + RMNET
+31: Diag + Modem + AT + ECM
+32: Modem + AT + ECM
+
+The first configuration (30) reuses u-blox R410M's VID/PID with
+identical interface configuration.
+
+A detailed description of the USB configuration for each mode follows:
+
++GTUSBMODE: 30
+--------------
+T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 19 Spd=480 MxCh= 0
+D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+P: Vendor=05c6 ProdID=90b2 Rev= 0.00
+S: Manufacturer=Fibocom MA510 Modem
+S: Product=Fibocom MA510 Modem
+S: SerialNumber=55e2695b
+C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
+I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
+E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
+E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
+E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
+E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
++GTUSBMODE: 31
+--------------
+T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 99 Spd=480 MxCh= 0
+D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
+P: Vendor=2cb7 ProdID=0106 Rev= 0.00
+S: Manufacturer=Fibocom MA510 Modem
+S: Product=Fibocom MA510 Modem
+S: SerialNumber=55e2695b
+C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
+A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
+I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
+E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
+E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
+E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
+E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
+I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
+I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
+E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
++GTUSBMODE: 32
+--------------
+T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=100 Spd=480 MxCh= 0
+D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
+P: Vendor=2cb7 ProdID=010a Rev= 0.00
+S: Manufacturer=Fibocom MA510 Modem
+S: Product=Fibocom MA510 Modem
+S: SerialNumber=55e2695b
+C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
+A: FirstIf#= 2 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
+I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
+E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
+E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
+E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
+E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
+I: If#= 3 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
+I:* If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
+E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
+Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/option.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -2131,6 +2131,8 @@ static const struct usb_device_id option
+ .driver_info = RSVD(4) | RSVD(5) },
+ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */
+ .driver_info = RSVD(6) },
++ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0106, 0xff) }, /* Fibocom MA510 (ECM mode w/ diag intf.) */
++ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x010a, 0xff) }, /* Fibocom MA510 (ECM mode) */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) }, /* Fibocom FG150 Diag */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) }, /* Fibocom FG150 AT */
+ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
--- /dev/null
+From 26a08f8bad3e1f98d3153f939fb8cd330da4cb26 Mon Sep 17 00:00:00 2001
+From: Scott Chen <scott@labau.com.tw>
+Date: Mon, 25 Apr 2022 17:00:20 +0800
+Subject: USB: serial: pl2303: add device id for HP LM930 Display
+
+From: Scott Chen <scott@labau.com.tw>
+
+commit 26a08f8bad3e1f98d3153f939fb8cd330da4cb26 upstream.
+
+Add the device id for the HPLM930Display which is a PL2303GC based
+device.
+
+Signed-off-by: Scott Chen <scott@labau.com.tw>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/pl2303.c | 1 +
+ drivers/usb/serial/pl2303.h | 1 +
+ 2 files changed, 2 insertions(+)
+
+--- a/drivers/usb/serial/pl2303.c
++++ b/drivers/usb/serial/pl2303.c
+@@ -103,6 +103,7 @@ static const struct usb_device_id id_tab
+ { USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LM920_PRODUCT_ID) },
++ { USB_DEVICE(HP_VENDOR_ID, HP_LM930_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LM940_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_TD620_PRODUCT_ID) },
+ { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
+--- a/drivers/usb/serial/pl2303.h
++++ b/drivers/usb/serial/pl2303.h
+@@ -134,6 +134,7 @@
+ #define HP_TD620_PRODUCT_ID 0x0956
+ #define HP_LD960_PRODUCT_ID 0x0b39
+ #define HP_LD381_PRODUCT_ID 0x0f7f
++#define HP_LM930_PRODUCT_ID 0x0f9b
+ #define HP_LCM220_PRODUCT_ID 0x3139
+ #define HP_LCM960_PRODUCT_ID 0x3239
+ #define HP_LD220_PRODUCT_ID 0x3524
--- /dev/null
+From 870b1eee2d844727b06e238c121d260bc5645580 Mon Sep 17 00:00:00 2001
+From: Ethan Yang <etyang@sierrawireless.com>
+Date: Mon, 25 Apr 2022 13:58:40 +0800
+Subject: USB: serial: qcserial: add support for Sierra Wireless EM7590
+
+From: Ethan Yang <etyang@sierrawireless.com>
+
+commit 870b1eee2d844727b06e238c121d260bc5645580 upstream.
+
+Add support for Sierra Wireless EM7590 0xc080/0xc081 compositions.
+
+Signed-off-by: Ethan Yang <etyang@sierrawireless.com>
+Link: https://lore.kernel.org/r/20220425055840.5693-1-etyang@sierrawireless.com
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/qcserial.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/usb/serial/qcserial.c
++++ b/drivers/usb/serial/qcserial.c
+@@ -170,6 +170,8 @@ static const struct usb_device_id id_tab
+ {DEVICE_SWI(0x1199, 0x9090)}, /* Sierra Wireless EM7565 QDL */
+ {DEVICE_SWI(0x1199, 0x9091)}, /* Sierra Wireless EM7565 */
+ {DEVICE_SWI(0x1199, 0x90d2)}, /* Sierra Wireless EM9191 QDL */
++ {DEVICE_SWI(0x1199, 0xc080)}, /* Sierra Wireless EM7590 QDL */
++ {DEVICE_SWI(0x1199, 0xc081)}, /* Sierra Wireless EM7590 */
+ {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
+ {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
+ {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
projects / thirdparty / kernel / stable-queue.git / commitdiff
