usb: typec: ucsi: Add new notification bits

Newer UCSI versions defined additional notification bits that can be
enabled by the PPM. Add their definitions and convert all definitions
to BIT_ULL() as we now cross the 32-bit boundary.

Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/3filrg6mbh6m3galir7ew5juakd25uvksimr7mqd7uc5td3xza@fdvxcewozqeh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index c4d103db9d0f857a4b3ee327c5f93fbe17f38926..e70cf5b15562e00c8743bd89bab5d69968b1d798 100644 (file)
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -124,18 +124,23 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num);
 #define UCSI_ACK_COMMAND_COMPLETE              BIT(17)
 
 /* SET_NOTIFICATION_ENABLE command bits */
-#define UCSI_ENABLE_NTFY_CMD_COMPLETE          BIT(16)
-#define UCSI_ENABLE_NTFY_EXT_PWR_SRC_CHANGE    BIT(17)
-#define UCSI_ENABLE_NTFY_PWR_OPMODE_CHANGE     BIT(18)
-#define UCSI_ENABLE_NTFY_CAP_CHANGE            BIT(21)
-#define UCSI_ENABLE_NTFY_PWR_LEVEL_CHANGE      BIT(22)
-#define UCSI_ENABLE_NTFY_PD_RESET_COMPLETE     BIT(23)
-#define UCSI_ENABLE_NTFY_CAM_CHANGE            BIT(24)
-#define UCSI_ENABLE_NTFY_BAT_STATUS_CHANGE     BIT(25)
-#define UCSI_ENABLE_NTFY_PARTNER_CHANGE                BIT(27)
-#define UCSI_ENABLE_NTFY_PWR_DIR_CHANGE                BIT(28)
-#define UCSI_ENABLE_NTFY_CONNECTOR_CHANGE      BIT(30)
-#define UCSI_ENABLE_NTFY_ERROR                 BIT(31)
+#define UCSI_ENABLE_NTFY_CMD_COMPLETE          BIT_ULL(16)
+#define UCSI_ENABLE_NTFY_EXT_PWR_SRC_CHANGE    BIT_ULL(17)
+#define UCSI_ENABLE_NTFY_PWR_OPMODE_CHANGE     BIT_ULL(18)
+#define UCSI_ENABLE_NTFY_ATTENTION             BIT_ULL(19)
+#define UCSI_ENABLE_NTFY_LPM_FW_UPDATE_REQ     BIT_ULL(20)
+#define UCSI_ENABLE_NTFY_CAP_CHANGE            BIT_ULL(21)
+#define UCSI_ENABLE_NTFY_PWR_LEVEL_CHANGE      BIT_ULL(22)
+#define UCSI_ENABLE_NTFY_PD_RESET_COMPLETE     BIT_ULL(23)
+#define UCSI_ENABLE_NTFY_CAM_CHANGE            BIT_ULL(24)
+#define UCSI_ENABLE_NTFY_BAT_STATUS_CHANGE     BIT_ULL(25)
+#define UCSI_ENABLE_NTFY_SECURITY_REQ_PARTNER  BIT_ULL(26)
+#define UCSI_ENABLE_NTFY_PARTNER_CHANGE                BIT_ULL(27)
+#define UCSI_ENABLE_NTFY_PWR_DIR_CHANGE                BIT_ULL(28)
+#define UCSI_ENABLE_NTFY_SET_RETIMER_MODE      BIT_ULL(29)
+#define UCSI_ENABLE_NTFY_CONNECTOR_CHANGE      BIT_ULL(30)
+#define UCSI_ENABLE_NTFY_ERROR                 BIT_ULL(31)
+#define UCSI_ENABLE_NTFY_SINK_PATH_STS_CHANGE  BIT_ULL(32)
 #define UCSI_ENABLE_NTFY_ALL                   0xdbe70000
 
 /* SET_UOR command bits */