#define TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT(byte_count) \
(1)
-/* However, some addresses may not be profitable to use hardware to watch,
- or may be difficult to understand when the addressed object is out of
- scope, and hence should be unwatched. On some targets, this may have
- severe performance penalties, such that we might as well use regular
- watchpoints, and save (possibly precious) hardware watchpoints for other
- locations.
-
- On HP-UX, we choose not to watch stack-based addresses, because
-
- [1] Our implementation relies on page protection traps. The granularity
- of these is large and so can generate many false hits, which are expensive
- to respond to.
-
- [2] Watches of "*p" where we may not know the symbol that p points to,
- make it difficult to know when the addressed object is out of scope, and
- hence shouldn't be watched. Page protection that isn't removed when the
- addressed object is out of scope will either degrade execution speed
- (false hits) or give false triggers (when the address is recycled by
- other calls).
-
- Since either of these points results in a slow-running inferior, we might
- as well use normal watchpoints, aka single-step & test. */
-#define TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT(pid,start,len) \
- hppa_range_profitable_for_hw_watchpoint(pid, start, (LONGEST)(len))
-
/* On HP-UX, we're using page-protection to implement hardware watchpoints.
When an instruction attempts to write to a write-protected memory page,
a SIGBUS is raised. At that point, the write has not actually occurred.
#define HPUXHPPA
-#define MAY_SWITCH_FROM_INFERIOR_PID (1)
-
#define MAY_FOLLOW_EXEC (1)
-#define USE_THREAD_STEP_NEEDED (1)
-
#include "infttrace.h" /* For parent_attach_all. */
+++ /dev/null
-/* Definitions and macros for support of AMD's remote debugger, MiniMON.
- Copyright 1990, 1991 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-/*
- * Some basic types. FIXME, this should be done by declaring bitfield
- * sizes in the structs. We can't portably depend on a "long int" being
- * 32 bits, etc.
- */
-typedef long int INT32; /* 32 bit integer */
-typedef unsigned long int UINT32; /* 32 bit integer (unsigned) */
-typedef unsigned long int ADDR32; /* 32 bit address */
-typedef unsigned long int INST32; /* 32 bit instruction */
-typedef long int BOOLEAN; /* Boolean value (32 bit) */
-typedef unsigned char BYTE; /* byte (8 bit) */
-typedef short int INT16; /* 16 bit integer */
-typedef unsigned short int UINT16; /* 16 bit integer (unsigned) */
-
-/****************************************************************************/
-/************************* Message Information ******************************/
-/****************************************************************************/
-
-/*
- * Error codes
- */
-
-/* General errors */
-#define EMUSAGE 1 /* Bad args / flags */
-#define EMFAIL 2 /* Unrecoverable error */
-#define EMBADADDR 3 /* Illegal address */
-#define EMBADREG 4 /* Illegal register */
-#define EMSYNTAX 5 /* Illegal command syntax */
-#define EMACCESS 6 /* Could not access memory */
-#define EMALLOC 7 /* Could not allocate memory */
-#define EMTARGET 8 /* Unknown target type */
-#define EMHINIT 9 /* Could not initialize host */
-#define EMCOMM 10 /* Could not open communication channel */
-
-/* Message errors */
-#define EMBADMSG 11 /* Unknown message type */
-#define EMMSG2BIG 12 /* Message to large for buffer */
-#define EMNOSEND 13 /* Could not send message */
-#define EMNORECV 14 /* Could not receive message */
-
-#define EMRESET 15 /* Could not RESET target */
-#define EMCONFIG 16 /* Could not get target CONFIG */
-#define EMSTATUS 17 /* Could not get target STATUS */
-#define EMREAD 18 /* Could not READ target memory */
-#define EMWRITE 19 /* Could not WRITE target memory */
-#define EMBKPTSET 20 /* Could not set breakpoint */
-#define EMBKPTRM 21 /* Could not remove breakpoint */
-#define EMBKPTSTAT 22 /* Could not get breakpoint status */
-#define EMBKPTNONE 23 /* All breakpoints in use */
-#define EMBKPTUSED 24 /* Breakpoints already in use */
-#define EMCOPY 25 /* Could not COPY target memory */
-#define EMFILL 26 /* Could not FILL target memory */
-#define EMINIT 27 /* Could not initialize target memory */
-#define EMGO 28 /* Could not start execution */
-#define EMSTEP 29 /* Could not single step */
-#define EMBREAK 30 /* Could not BREAK */
-#define EMHIF 31 /* Could not perform HIF service */
-#define EMCHANNEL0 32 /* Could not read CHANNEL0 */
-#define EMCHANNEL1 33 /* Could not write CHANNEL1 */
-
-/* COFF file loader errors */
-#define EMOPEN 34 /* Could not open COFF file */
-#define EMHDR 35 /* Could not read COFF header */
-#define EMMAGIC 36 /* Bad magic number */
-#define EMAOUT 37 /* Could not read COFF a.out header */
-#define EMSCNHDR 38 /* Could not read COFF section header */
-#define EMSCN 39 /* Could not read COFF section */
-#define EMCLOSE 40 /* Could not close COFF file */
-
-/* Log file errors */
-#define EMLOGOPEN 41 /* Could not open log file */
-#define EMLOGREAD 42 /* Could not read log file */
-#define EMLOGWRITE 43 /* Could not write to log file */
-#define EMLOGCLOSE 44 /* Could not close log file */
-
-/* Command file errors */
-#define EMCMDOPEN 45 /* Could not open command file */
-#define EMCMDREAD 46 /* Could not read command file */
-#define EMCMDWRITE 47 /* Could not write to command file */
-#define EMCMDCLOSE 48 /* Could not close comand file */
-
-#define EMTIMEOUT 49 /* Host timed out waiting for a message */
-#define EMCOMMTYPE 50 /* A '-t' flag must be specified */
-#define EMCOMMERR 51 /* Communication error */
-#define EMBAUD 52 /* Invalid baud rate specified */
-/*
- * Memory Spaces
- */
-#define LOCAL_REG 0 /* Local processor register */
-#define GLOBAL_REG 1 /* Global processor register */
-#define SPECIAL_REG 2 /* Special processor register */
-#define TLB_REG 3 /* Translation Lookaside Buffer */
-#define COPROC_REG 4 /* Coprocessor register */
-#define I_MEM 5 /* Instruction Memory */
-#define D_MEM 6 /* Data Memory */
-#define I_ROM 7 /* Instruction ROM */
-#define D_ROM 8 /* Data ROM */
-#define I_O 9 /* Input/Output */
-#define I_CACHE 10 /* Instruction Cache */
-#define D_CACHE 11 /* Data Cache */
-
-/* To supress warnings for zero length array definitions */
-#define DUMMY 1
-
-/*
- ** Host to target definitions
- */
-
-#define RESET 0
-#define CONFIG_REQ 1
-#define STATUS_REQ 2
-#define READ_REQ 3
-#define WRITE_REQ 4
-#define BKPT_SET 5
-#define BKPT_RM 6
-#define BKPT_STAT 7
-#define COPY 8
-#define FILL 9
-#define INIT 10
-#define GO 11
-#define STEP 12
-#define BREAK 13
-
-#define HIF_CALL_RTN 64
-#define CHANNEL0 65
-#define CHANNEL1_ACK 66
-
-
-/*
- ** Target to host definitions
- */
-
-#define RESET_ACK 32
-#define CONFIG 33
-#define STATUS 34
-#define READ_ACK 35
-#define WRITE_ACK 36
-#define BKPT_SET_ACK 37
-#define BKPT_RM_ACK 38
-#define BKPT_STAT_ACK 39
-#define COPY_ACK 40
-#define FILL_ACK 41
-#define INIT_ACK 42
-#define HALT 43
-
-#define ERROR 63
-
-#define HIF_CALL 96
-#define CHANNEL0_ACK 97
-#define CHANNEL1 98
-
-
-/* A "generic" message */
-struct generic_msg_t
- {
- INT32 code; /* generic */
- INT32 length;
- BYTE byte[DUMMY];
- };
-
-
-/* A "generic" message (with an INT32 array) */
-struct generic_int32_msg_t
- {
- INT32 code; /* generic */
- INT32 length;
- INT32 int32[DUMMY];
- };
-
-
-/*
- ** Host to target messages
- */
-
-struct reset_msg_t
- {
- INT32 code; /* 0 */
- INT32 length;
- };
-
-
-struct config_req_msg_t
- {
- INT32 code; /* 1 */
- INT32 length;
- };
-
-
-struct status_req_msg_t
- {
- INT32 code; /* 2 */
- INT32 length;
- };
-
-
-struct read_req_msg_t
- {
- INT32 code; /* 3 */
- INT32 length;
- INT32 memory_space;
- ADDR32 address;
- INT32 byte_count;
- };
-
-
-struct write_req_msg_t
- {
- INT32 code; /* 4 */
- INT32 length;
- INT32 memory_space;
- ADDR32 address;
- INT32 byte_count;
- BYTE data[DUMMY];
- };
-
-
-struct write_r_msg_t
- {
- INT32 code; /* 4 */
- INT32 length;
- INT32 memory_space;
- ADDR32 address;
- INT32 byte_count;
- INT32 data[DUMMY];
- };
-
-
-struct bkpt_set_msg_t
- {
- INT32 code; /* 5 */
- INT32 length;
- INT32 memory_space;
- ADDR32 bkpt_addr;
- INT32 pass_count;
- INT32 bkpt_type;
- };
-
-
-struct bkpt_rm_msg_t
- {
- INT32 code; /* 6 */
- INT32 length;
- INT32 memory_space;
- ADDR32 bkpt_addr;
- };
-
-
-struct bkpt_stat_msg_t
- {
- INT32 code; /* 7 */
- INT32 length;
- INT32 memory_space;
- ADDR32 bkpt_addr;
- };
-
-
-struct copy_msg_t
- {
- INT32 code; /* 8 */
- INT32 length;
- INT32 source_space;
- ADDR32 source_addr;
- INT32 dest_space;
- ADDR32 dest_addr;
- INT32 byte_count;
- };
-
-
-struct fill_msg_t
- {
- INT32 code; /* 9 */
- INT32 length;
- INT32 memory_space;
- ADDR32 start_addr;
- INT32 fill_count;
- INT32 byte_count;
- BYTE fill_data[DUMMY];
- };
-
-
-struct init_msg_t
- {
- INT32 code; /* 10 */
- INT32 length;
- ADDR32 text_start;
- ADDR32 text_end;
- ADDR32 data_start;
- ADDR32 data_end;
- ADDR32 entry_point;
- INT32 mem_stack_size;
- INT32 reg_stack_size;
- ADDR32 arg_start;
- INT32 os_control;
- };
-
-
-struct go_msg_t
- {
- INT32 code; /* 11 */
- INT32 length;
- };
-
-
-struct step_msg_t
- {
- INT32 code; /* 12 */
- INT32 length;
- INT32 count;
- };
-
-
-struct break_msg_t
- {
- INT32 code; /* 13 */
- INT32 length;
- };
-
-
-struct hif_call_rtn_msg_t
- {
- INT32 code; /* 64 */
- INT32 length;
- INT32 service_number;
- INT32 gr121;
- INT32 gr96;
- INT32 gr97;
- };
-
-
-struct channel0_msg_t
- {
- INT32 code; /* 65 */
- INT32 length;
- BYTE data;
- };
-
-
-struct channel1_ack_msg_t
- {
- INT32 code; /* 66 */
- INT32 length;
- };
-
-
-/*
- ** Target to host messages
- */
-
-
-struct reset_ack_msg_t
- {
- INT32 code; /* 32 */
- INT32 length;
- };
-
-
-struct config_msg_t
- {
- INT32 code; /* 33 */
- INT32 length;
- INT32 processor_id;
- INT32 version;
- ADDR32 I_mem_start;
- INT32 I_mem_size;
- ADDR32 D_mem_start;
- INT32 D_mem_size;
- ADDR32 ROM_start;
- INT32 ROM_size;
- INT32 max_msg_size;
- INT32 max_bkpts;
- INT32 coprocessor;
- INT32 reserved;
- };
-
-
-struct status_msg_t
- {
- INT32 code; /* 34 */
- INT32 length;
- INT32 msgs_sent;
- INT32 msgs_received;
- INT32 errors;
- INT32 bkpts_hit;
- INT32 bkpts_free;
- INT32 traps;
- INT32 fills;
- INT32 spills;
- INT32 cycles;
- INT32 reserved;
- };
-
-
-struct read_ack_msg_t
- {
- INT32 code; /* 35 */
- INT32 length;
- INT32 memory_space;
- ADDR32 address;
- INT32 byte_count;
- BYTE data[DUMMY];
- };
-
-struct read_r_ack_msg_t
- {
- INT32 code; /* 35 */
- INT32 length;
- INT32 memory_space;
- ADDR32 address;
- INT32 byte_count;
- INT32 data[DUMMY];
- };
-
-
-struct write_ack_msg_t
- {
- INT32 code; /* 36 */
- INT32 length;
- INT32 memory_space;
- ADDR32 address;
- INT32 byte_count;
- };
-
-
-struct bkpt_set_ack_msg_t
- {
- INT32 code; /* 37 */
- INT32 length;
- INT32 memory_space;
- ADDR32 address;
- INT32 pass_count;
- INT32 bkpt_type;
- };
-
-
-struct bkpt_rm_ack_msg_t
- {
- INT32 code; /* 38 */
- INT32 length;
- INT32 memory_space;
- ADDR32 address;
- };
-
-
-struct bkpt_stat_ack_msg_t
- {
- INT32 code; /* 39 */
- INT32 length;
- INT32 memory_space;
- ADDR32 address;
- INT32 pass_count;
- INT32 bkpt_type;
- };
-
-
-struct copy_ack_msg_t
- {
- INT32 code; /* 40 */
- INT32 length;
- INT32 source_space;
- ADDR32 source_addr;
- INT32 dest_space;
- ADDR32 dest_addr;
- INT32 byte_count;
- };
-
-
-struct fill_ack_msg_t
- {
- INT32 code; /* 41 */
- INT32 length;
- INT32 memory_space;
- ADDR32 start_addr;
- INT32 fill_count;
- INT32 byte_count;
- };
-
-
-struct init_ack_msg_t
- {
- INT32 code; /* 42 */
- INT32 length;
- };
-
-
-struct halt_msg_t
- {
- INT32 code; /* 43 */
- INT32 length;
- INT32 memory_space;
- ADDR32 pc0;
- ADDR32 pc1;
- INT32 trap_number;
- };
-
-
-struct error_msg_t
- {
- INT32 code; /* 63 */
- INT32 length;
- INT32 error_code;
- INT32 memory_space;
- ADDR32 address;
- };
-
-
-struct hif_call_msg_t
- {
- INT32 code; /* 96 */
- INT32 length;
- INT32 service_number;
- INT32 lr2;
- INT32 lr3;
- INT32 lr4;
- };
-
-
-struct channel0_ack_msg_t
- {
- INT32 code; /* 97 */
- INT32 length;
- };
-
-
-struct channel1_msg_t
- {
- INT32 code; /* 98 */
- INT32 length;
- BYTE data[DUMMY];
- };
-
-
-
-/*
- ** Union all of the message types together
- */
-
-union msg_t
- {
- struct generic_msg_t generic_msg;
- struct generic_int32_msg_t generic_int32_msg;
-
- struct reset_msg_t reset_msg;
- struct config_req_msg_t config_req_msg;
- struct status_req_msg_t status_req_msg;
- struct read_req_msg_t read_req_msg;
- struct write_req_msg_t write_req_msg;
- struct write_r_msg_t write_r_msg;
- struct bkpt_set_msg_t bkpt_set_msg;
- struct bkpt_rm_msg_t bkpt_rm_msg;
- struct bkpt_stat_msg_t bkpt_stat_msg;
- struct copy_msg_t copy_msg;
- struct fill_msg_t fill_msg;
- struct init_msg_t init_msg;
- struct go_msg_t go_msg;
- struct step_msg_t step_msg;
- struct break_msg_t break_msg;
-
- struct hif_call_rtn_msg_t hif_call_rtn_msg;
- struct channel0_msg_t channel0_msg;
- struct channel1_ack_msg_t channel1_ack_msg;
-
- struct reset_ack_msg_t reset_ack_msg;
- struct config_msg_t config_msg;
- struct status_msg_t status_msg;
- struct read_ack_msg_t read_ack_msg;
- struct read_r_ack_msg_t read_r_ack_msg;
- struct write_ack_msg_t write_ack_msg;
- struct bkpt_set_ack_msg_t bkpt_set_ack_msg;
- struct bkpt_rm_ack_msg_t bkpt_rm_ack_msg;
- struct bkpt_stat_ack_msg_t bkpt_stat_ack_msg;
- struct copy_ack_msg_t copy_ack_msg;
- struct fill_ack_msg_t fill_ack_msg;
- struct init_ack_msg_t init_ack_msg;
- struct halt_msg_t halt_msg;
-
- struct error_msg_t error_msg;
-
- struct hif_call_msg_t hif_call_msg;
- struct channel0_ack_msg_t channel0_ack_msg;
- struct channel1_msg_t channel1_msg;
- };
projects / thirdparty / binutils-gdb.git / commitdiff
