--- /dev/null
+From 0fb410c914eb03c7e9d821e26d03bac0a239e5db Mon Sep 17 00:00:00 2001
+From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+Date: Tue, 27 May 2025 09:47:37 +0200
+Subject: Bluetooth: hci_qca: move the SoC type check to the right place
+
+From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+commit 0fb410c914eb03c7e9d821e26d03bac0a239e5db upstream.
+
+Commit 3d05fc82237a ("Bluetooth: qca: set power_ctrl_enabled on NULL
+returned by gpiod_get_optional()") accidentally changed the prevous
+behavior where power control would be disabled without the BT_EN GPIO
+only on QCA_WCN6750 and QCA_WCN6855 while also getting the error check
+wrong. We should treat every IS_ERR() return value from
+devm_gpiod_get_optional() as a reason to bail-out while we should only
+set power_ctrl_enabled to false on the two models mentioned above. While
+at it: use dev_err_probe() to save a LOC.
+
+Cc: stable@vger.kernel.org
+Fixes: 3d05fc82237a ("Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()")
+Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Tested-by: Hsin-chen Chuang <chharry@chromium.org>
+Reviewed-by: Hsin-chen Chuang <chharry@chromium.org>
+Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/bluetooth/hci_qca.c | 14 +++++++-------
+ 1 file changed, 7 insertions(+), 7 deletions(-)
+
+--- a/drivers/bluetooth/hci_qca.c
++++ b/drivers/bluetooth/hci_qca.c
+@@ -2307,14 +2307,14 @@ static int qca_serdev_probe(struct serde
+
+ qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
+ GPIOD_OUT_LOW);
+- if (IS_ERR(qcadev->bt_en) &&
+- (data->soc_type == QCA_WCN6750 ||
+- data->soc_type == QCA_WCN6855)) {
+- dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
+- return PTR_ERR(qcadev->bt_en);
+- }
++ if (IS_ERR(qcadev->bt_en))
++ return dev_err_probe(&serdev->dev,
++ PTR_ERR(qcadev->bt_en),
++ "failed to acquire BT_EN gpio\n");
+
+- if (!qcadev->bt_en)
++ if (!qcadev->bt_en &&
++ (data->soc_type == QCA_WCN6750 ||
++ data->soc_type == QCA_WCN6855))
+ power_ctrl_enabled = false;
+
+ qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
--- /dev/null
+From 5b3a91b207c00a8d27f75ce8aaa9860844da72c8 Mon Sep 17 00:00:00 2001
+From: Xu Yang <xu.yang_2@nxp.com>
+Date: Wed, 30 Apr 2025 17:44:59 +0800
+Subject: dt-bindings: phy: imx8mq-usb: fix fsl,phy-tx-vboost-level-microvolt property
+
+From: Xu Yang <xu.yang_2@nxp.com>
+
+commit 5b3a91b207c00a8d27f75ce8aaa9860844da72c8 upstream.
+
+The ticket TKT0676370 shows the description of TX_VBOOST_LVL is wrong in
+register PHY_CTRL3 bit[31:29].
+
+ 011: Corresponds to a launch amplitude of 1.12 V.
+ 010: Corresponds to a launch amplitude of 1.04 V.
+ 000: Corresponds to a launch amplitude of 0.88 V.
+
+After updated:
+
+ 011: Corresponds to a launch amplitude of 0.844 V.
+ 100: Corresponds to a launch amplitude of 1.008 V.
+ 101: Corresponds to a launch amplitude of 1.156 V.
+
+This will correct it accordingly.
+
+Fixes: b2e75563dc39 ("dt-bindings: phy: imx8mq-usb: add phy tuning properties")
+Cc: stable@vger.kernel.org
+Reviewed-by: Jun Li <jun.li@nxp.com>
+Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
+Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Link: https://lore.kernel.org/r/20250430094502.2723983-1-xu.yang_2@nxp.com
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+--- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
++++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
+@@ -58,8 +58,7 @@ properties:
+ fsl,phy-tx-vboost-level-microvolt:
+ description:
+ Adjust the boosted transmit launch pk-pk differential amplitude
+- minimum: 880
+- maximum: 1120
++ enum: [844, 1008, 1156]
+
+ fsl,phy-comp-dis-tune-percent:
+ description:
--- /dev/null
+From 1ad4b5a7de16806afc1aeaf012337e62af04e001 Mon Sep 17 00:00:00 2001
+From: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
+Date: Fri, 25 Apr 2025 17:18:07 +0200
+Subject: dt-bindings: usb: cypress,hx3: Add support for all variants
+
+From: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
+
+commit 1ad4b5a7de16806afc1aeaf012337e62af04e001 upstream.
+
+The Cypress HX3 hubs use different default PID value depending
+on the variant. Update compatibles list.
+Becasuse all hub variants use the same driver data, allow the
+dt node to have two compatibles: leftmost which matches the HW
+exactly, and the second one as fallback.
+
+Fixes: 1eca51f58a10 ("dt-bindings: usb: Add binding for Cypress HX3 USB 3.0 family")
+Cc: stable@vger.kernel.org # 6.6
+Cc: stable@vger.kernel.org # Backport of the patch ("dt-bindings: usb: usb-device: relax compatible pattern to a contains") from list: https://lore.kernel.org/linux-usb/20250418-dt-binding-usb-device-compatibles-v2-1-b3029f14e800@cherry.de/
+Cc: stable@vger.kernel.org # Backport of the patch in this series fixing product ID in onboard_dev_id_table in drivers/usb/misc/onboard_usb_dev.c driver
+Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
+Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
+Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-2-4a76a474a010@thaumatec.com
+[taken with Greg's blessing]
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ .../devicetree/bindings/usb/cypress,hx3.yaml | 19 ++++++++++++++++---
+ 1 file changed, 16 insertions(+), 3 deletions(-)
+
+diff --git a/Documentation/devicetree/bindings/usb/cypress,hx3.yaml b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
+index 1033b7a4b8f9..d6eac1213228 100644
+--- a/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
++++ b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
+@@ -14,9 +14,22 @@ allOf:
+
+ properties:
+ compatible:
+- enum:
+- - usb4b4,6504
+- - usb4b4,6506
++ oneOf:
++ - enum:
++ - usb4b4,6504
++ - usb4b4,6506
++ - items:
++ - enum:
++ - usb4b4,6500
++ - usb4b4,6508
++ - const: usb4b4,6504
++ - items:
++ - enum:
++ - usb4b4,6502
++ - usb4b4,6503
++ - usb4b4,6507
++ - usb4b4,650a
++ - const: usb4b4,6506
+
+ reg: true
+
+--
+2.49.0
+
--- /dev/null
+From 1b824eef269db44d068bbc0de74c94a8e8f9ce02 Mon Sep 17 00:00:00 2001
+From: Aurabindo Pillai <aurabindo.pillai@amd.com>
+Date: Wed, 21 May 2025 16:05:39 -0400
+Subject: Revert "drm/amd/display: more liberal vmin/vmax update for freesync"
+
+From: Aurabindo Pillai <aurabindo.pillai@amd.com>
+
+commit 1b824eef269db44d068bbc0de74c94a8e8f9ce02 upstream.
+
+This reverts commit cfb2d41831ee5647a4ae0ea7c24971a92d5dfa0d since it
+causes regressions on certain configs. Revert until the issue can be
+isolated and debugged.
+
+Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4238
+Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
+Acked-by: Alex Deucher <alexander.deucher@amd.com>
+Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 16 +++++-----------
+ 1 file changed, 5 insertions(+), 11 deletions(-)
+
+--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
++++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+@@ -610,21 +610,15 @@ static void dm_crtc_high_irq(void *inter
+ spin_lock_irqsave(&adev_to_drm(adev)->event_lock, flags);
+
+ if (acrtc->dm_irq_params.stream &&
+- acrtc->dm_irq_params.vrr_params.supported) {
+- bool replay_en = acrtc->dm_irq_params.stream->link->replay_settings.replay_feature_enabled;
+- bool psr_en = acrtc->dm_irq_params.stream->link->psr_settings.psr_feature_enabled;
+- bool fs_active_var_en = acrtc->dm_irq_params.freesync_config.state == VRR_STATE_ACTIVE_VARIABLE;
+-
++ acrtc->dm_irq_params.vrr_params.supported &&
++ acrtc->dm_irq_params.freesync_config.state ==
++ VRR_STATE_ACTIVE_VARIABLE) {
+ mod_freesync_handle_v_update(adev->dm.freesync_module,
+ acrtc->dm_irq_params.stream,
+ &acrtc->dm_irq_params.vrr_params);
+
+- /* update vmin_vmax only if freesync is enabled, or only if PSR and REPLAY are disabled */
+- if (fs_active_var_en || (!fs_active_var_en && !replay_en && !psr_en)) {
+- dc_stream_adjust_vmin_vmax(adev->dm.dc,
+- acrtc->dm_irq_params.stream,
+- &acrtc->dm_irq_params.vrr_params.adjust);
+- }
++ dc_stream_adjust_vmin_vmax(adev->dm.dc, acrtc->dm_irq_params.stream,
++ &acrtc->dm_irq_params.vrr_params.adjust);
+ }
+
+ /*
--- /dev/null
+From e3975aa899c0a3bbc10d035e699b142cd1373a71 Mon Sep 17 00:00:00 2001
+From: Dustin Lundquist <dustin@null-ptr.net>
+Date: Tue, 6 May 2025 11:18:45 -0700
+Subject: serial: jsm: fix NPE during jsm_uart_port_init
+
+From: Dustin Lundquist <dustin@null-ptr.net>
+
+commit e3975aa899c0a3bbc10d035e699b142cd1373a71 upstream.
+
+No device was set which caused serial_base_ctrl_add to crash.
+
+ BUG: kernel NULL pointer dereference, address: 0000000000000050
+ Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
+ CPU: 16 UID: 0 PID: 368 Comm: (udev-worker) Not tainted 6.12.25-amd64 #1 Debian 6.12.25-1
+ RIP: 0010:serial_base_ctrl_add+0x96/0x120
+ Call Trace:
+ <TASK>
+ serial_core_register_port+0x1a0/0x580
+ ? __setup_irq+0x39c/0x660
+ ? __kmalloc_cache_noprof+0x111/0x310
+ jsm_uart_port_init+0xe8/0x180 [jsm]
+ jsm_probe_one+0x1f4/0x410 [jsm]
+ local_pci_probe+0x42/0x90
+ pci_device_probe+0x22f/0x270
+ really_probe+0xdb/0x340
+ ? pm_runtime_barrier+0x54/0x90
+ ? __pfx___driver_attach+0x10/0x10
+ __driver_probe_device+0x78/0x110
+ driver_probe_device+0x1f/0xa0
+ __driver_attach+0xba/0x1c0
+ bus_for_each_dev+0x8c/0xe0
+ bus_add_driver+0x112/0x1f0
+ driver_register+0x72/0xd0
+ jsm_init_module+0x36/0xff0 [jsm]
+ ? __pfx_jsm_init_module+0x10/0x10 [jsm]
+ do_one_initcall+0x58/0x310
+ do_init_module+0x60/0x230
+
+Tested with Digi Neo PCIe 8 port card.
+
+Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM")
+Cc: stable <stable@kernel.org>
+Signed-off-by: Dustin Lundquist <dustin@null-ptr.net>
+Link: https://lore.kernel.org/r/3f31d4f75863614655c4673027a208be78d022ec.camel@null-ptr.net
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/tty/serial/jsm/jsm_tty.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/tty/serial/jsm/jsm_tty.c
++++ b/drivers/tty/serial/jsm/jsm_tty.c
+@@ -451,6 +451,7 @@ int jsm_uart_port_init(struct jsm_board
+ if (!brd->channels[i])
+ continue;
+
++ brd->channels[i]->uart_port.dev = &brd->pci_dev->dev;
+ brd->channels[i]->uart_port.irq = brd->irq;
+ brd->channels[i]->uart_port.uartclk = 14745600;
+ brd->channels[i]->uart_port.type = PORT_JSM;
acpi-cpufreq-fix-nominal_freq-units-to-khz-in-get_max_boost_ratio.patch
rtc-make-rtc_time64_to_tm-support-dates-before-1970.patch
rtc-fix-offset-calculation-for-.start_secs-0.patch
+usb-quirks-add-no_lpm-quirk-for-sandisk-extreme-55ae.patch
+usb-storage-ignore-uas-driver-for-sandisk-3.2-gen2-storage-device.patch
+usb-serial-pl2303-add-new-chip-pl2303gc-q20-and-pl2303gt-2ab.patch
+usb-typec-ucsi-fix-clang-wsign-conversion-warning.patch
+bluetooth-hci_qca-move-the-soc-type-check-to-the-right-place.patch
+serial-jsm-fix-npe-during-jsm_uart_port_init.patch
+usb-usbtmc-fix-timeout-value-in-get_stb.patch
+thunderbolt-do-not-double-dequeue-a-configuration-request.patch
+dt-bindings-usb-cypress-hx3-add-support-for-all-variants.patch
+dt-bindings-phy-imx8mq-usb-fix-fsl-phy-tx-vboost-level-microvolt-property.patch
+revert-drm-amd-display-more-liberal-vmin-vmax-update-for-freesync.patch
--- /dev/null
+From 0f73628e9da1ee39daf5f188190cdbaee5e0c98c Mon Sep 17 00:00:00 2001
+From: Sergey Senozhatsky <senozhatsky@chromium.org>
+Date: Fri, 28 Mar 2025 00:03:50 +0900
+Subject: thunderbolt: Do not double dequeue a configuration request
+
+From: Sergey Senozhatsky <senozhatsky@chromium.org>
+
+commit 0f73628e9da1ee39daf5f188190cdbaee5e0c98c upstream.
+
+Some of our devices crash in tb_cfg_request_dequeue():
+
+ general protection fault, probably for non-canonical address 0xdead000000000122
+
+ CPU: 6 PID: 91007 Comm: kworker/6:2 Tainted: G U W 6.6.65
+ RIP: 0010:tb_cfg_request_dequeue+0x2d/0xa0
+ Call Trace:
+ <TASK>
+ ? tb_cfg_request_dequeue+0x2d/0xa0
+ tb_cfg_request_work+0x33/0x80
+ worker_thread+0x386/0x8f0
+ kthread+0xed/0x110
+ ret_from_fork+0x38/0x50
+ ret_from_fork_asm+0x1b/0x30
+
+The circumstances are unclear, however, the theory is that
+tb_cfg_request_work() can be scheduled twice for a request:
+first time via frame.callback from ring_work() and second
+time from tb_cfg_request(). Both times kworkers will execute
+tb_cfg_request_dequeue(), which results in double list_del()
+from the ctl->request_queue (the list poison deference hints
+at it: 0xdead000000000122).
+
+Do not dequeue requests that don't have TB_CFG_REQUEST_ACTIVE
+bit set.
+
+Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
+Cc: stable@vger.kernel.org
+Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/thunderbolt/ctl.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/drivers/thunderbolt/ctl.c
++++ b/drivers/thunderbolt/ctl.c
+@@ -143,6 +143,11 @@ static void tb_cfg_request_dequeue(struc
+ struct tb_ctl *ctl = req->ctl;
+
+ mutex_lock(&ctl->request_queue_lock);
++ if (!test_bit(TB_CFG_REQUEST_ACTIVE, &req->flags)) {
++ mutex_unlock(&ctl->request_queue_lock);
++ return;
++ }
++
+ list_del(&req->list);
+ clear_bit(TB_CFG_REQUEST_ACTIVE, &req->flags);
+ if (test_bit(TB_CFG_REQUEST_CANCELED, &req->flags))
--- /dev/null
+From 19f795591947596b5b9efa86fd4b9058e45786e9 Mon Sep 17 00:00:00 2001
+From: Jiayi Li <lijiayi@kylinos.cn>
+Date: Thu, 8 May 2025 13:59:47 +0800
+Subject: usb: quirks: Add NO_LPM quirk for SanDisk Extreme 55AE
+
+From: Jiayi Li <lijiayi@kylinos.cn>
+
+commit 19f795591947596b5b9efa86fd4b9058e45786e9 upstream.
+
+This device exhibits I/O errors during file transfers due to unstable
+link power management (LPM) behavior. The kernel logs show repeated
+warm resets and eventual disconnection when LPM is enabled:
+
+[ 3467.810740] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0020
+[ 3467.810740] usb usb2-port5: do warm reset
+[ 3467.866444] usb usb2-port5: not warm reset yet, waiting 50ms
+[ 3467.907407] sd 0:0:0:0: [sda] tag#12 sense submit err -19
+[ 3467.994423] usb usb2-port5: status 02c0, change 0001, 10.0 Gb/s
+[ 3467.994453] usb 2-5: USB disconnect, device number 4
+
+The error -19 (ENODEV) occurs when the device disappears during write
+operations. Adding USB_QUIRK_NO_LPM disables link power management
+for this specific device, resolving the stability issues.
+
+Signed-off-by: Jiayi Li <lijiayi@kylinos.cn>
+Cc: stable <stable@kernel.org>
+Link: https://lore.kernel.org/r/20250508055947.764538-1-lijiayi@kylinos.cn
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/core/quirks.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/usb/core/quirks.c
++++ b/drivers/usb/core/quirks.c
+@@ -372,6 +372,9 @@ static const struct usb_device_id usb_qu
+ /* SanDisk Corp. SanDisk 3.2Gen1 */
+ { USB_DEVICE(0x0781, 0x55a3), .driver_info = USB_QUIRK_DELAY_INIT },
+
++ /* SanDisk Extreme 55AE */
++ { USB_DEVICE(0x0781, 0x55ae), .driver_info = USB_QUIRK_NO_LPM },
++
+ /* Realforce 87U Keyboard */
+ { USB_DEVICE(0x0853, 0x011b), .driver_info = USB_QUIRK_NO_LPM },
+
--- /dev/null
+From d3a889482bd5abf2bbdc1ec3d2d49575aa160c9c Mon Sep 17 00:00:00 2001
+From: Charles Yeh <charlesyeh522@gmail.com>
+Date: Wed, 21 May 2025 21:23:54 +0800
+Subject: USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
+
+From: Charles Yeh <charlesyeh522@gmail.com>
+
+commit d3a889482bd5abf2bbdc1ec3d2d49575aa160c9c upstream.
+
+Add new bcd (0x905) to support PL2303GT-2AB (TYPE_HXN).
+Add new bcd (0x1005) to support PL2303GC-Q20 (TYPE_HXN).
+
+Signed-off-by: Charles Yeh <charlesyeh522@gmail.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/pl2303.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/usb/serial/pl2303.c
++++ b/drivers/usb/serial/pl2303.c
+@@ -457,6 +457,8 @@ static int pl2303_detect_type(struct usb
+ case 0x605:
+ case 0x700: /* GR */
+ case 0x705:
++ case 0x905: /* GT-2AB */
++ case 0x1005: /* GC-Q20 */
+ return TYPE_HXN;
+ }
+ break;
--- /dev/null
+From a541acceedf4f639f928f41fbb676b75946dc295 Mon Sep 17 00:00:00 2001
+From: Hongyu Xie <xiehongyu1@kylinos.cn>
+Date: Mon, 19 May 2025 10:33:28 +0800
+Subject: usb: storage: Ignore UAS driver for SanDisk 3.2 Gen2 storage device
+
+From: Hongyu Xie <xiehongyu1@kylinos.cn>
+
+commit a541acceedf4f639f928f41fbb676b75946dc295 upstream.
+
+SanDisk 3.2 Gen2 storage device(0781:55e8) doesn't work well with UAS.
+Log says,
+[ 6.507865][ 3] [ T159] usb 2-1.4: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
+[ 6.540314][ 3] [ T159] usb 2-1.4: New USB device found, idVendor=0781, idProduct=55e8, bcdDevice= 0.01
+[ 6.576304][ 3] [ T159] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[ 6.584727][ 3] [ T159] usb 2-1.4: Product: SanDisk 3.2 Gen2
+[ 6.590459][ 3] [ T159] usb 2-1.4: Manufacturer: SanDisk
+[ 6.595845][ 3] [ T159] usb 2-1.4: SerialNumber: 03021707022525140940
+[ 7.230852][ 0] [ T265] usbcore: registered new interface driver usb-storage
+[ 7.251247][ 0] [ T265] scsi host3: uas
+[ 7.255280][ 0] [ T265] usbcore: registered new interface driver uas
+[ 7.270498][ 1] [ T192] scsi 3:0:0:0: Direct-Access SanDisk Extreme Pro DDE1 0110 PQ: 0 ANSI: 6
+[ 7.299588][ 3] [ T192] scsi 3:0:0:1: Enclosure SanDisk SES Device 0110 PQ: 0 ANSI: 6
+[ 7.321681][ 3] [ T192] sd 3:0:0:0: Attached scsi generic sg1 type 0
+[ 7.328185][ 3] [ T192] scsi 3:0:0:1: Attached scsi generic sg2 type 13
+[ 7.328804][ 0] [ T191] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
+[ 7.343486][ 0] [ T191] sd 3:0:0:0: [sda] 4096-byte physical blocks
+[ 7.364611][ 0] [ T191] sd 3:0:0:0: [sda] Write Protect is off
+[ 7.370524][ 0] [ T191] sd 3:0:0:0: [sda] Mode Sense: 3d 00 10 00
+[ 7.390655][ 0] [ T191] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
+[ 7.401363][ 0] [ T191] sd 3:0:0:0: [sda] Optimal transfer size 1048576 bytes
+[ 7.436010][ 0] [ T191] sda: sda1
+[ 7.450850][ 0] [ T191] sd 3:0:0:0: [sda] Attached SCSI disk
+[ 7.470218][ 4] [ T262] scsi 3:0:0:1: Failed to get diagnostic page 0x1
+[ 7.474869][ 0] [ C0] sd 3:0:0:0: [sda] tag#0 data cmplt err -75 uas-tag 2 inflight: CMD
+[ 7.476911][ 4] [ T262] scsi 3:0:0:1: Failed to bind enclosure -19
+[ 7.485330][ 0] [ C0] sd 3:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 00 28 00 00 10 00
+[ 7.491593][ 4] [ T262] ses 3:0:0:1: Attached Enclosure device
+[ 38.066980][ 4] [ T192] sd 3:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN
+[ 38.076012][ 4] [ T192] sd 3:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 00 00 01 08 00 00 f8 00
+[ 38.086485][ 4] [ T192] sd 3:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
+[ 38.095515][ 4] [ T192] sd 3:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 10 00 00 08 00
+[ 38.104122][ 4] [ T192] sd 3:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD IN
+[ 38.113152][ 4] [ T192] sd 3:0:0:0: [sda] tag#2 CDB: Read(10) 28 00 00 00 00 88 00 00 78 00
+[ 38.121761][ 4] [ T192] sd 3:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN
+[ 38.130791][ 4] [ T192] sd 3:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 00 00 00 48 00 00 30 00
+[ 38.139401][ 4] [ T192] sd 3:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD
+[ 38.148170][ 4] [ T192] sd 3:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 00 28 00 00 10 00
+[ 38.178980][ 2] [ T304] scsi host3: uas_eh_device_reset_handler start
+[ 38.901540][ 2] [ T304] usb 2-1.4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
+[ 38.936791][ 2] [ T304] scsi host3: uas_eh_device_reset_handler success
+
+Device decriptor is below,
+Bus 002 Device 006: ID 0781:55e8 SanDisk Corp. SanDisk 3.2 Gen2
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 3.20
+ bDeviceClass 0
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 9
+ idVendor 0x0781 SanDisk Corp.
+ idProduct 0x55e8
+ bcdDevice 0.01
+ iManufacturer 1 SanDisk
+ iProduct 2 SanDisk 3.2 Gen2
+ iSerial 3 03021707022525140940
+ bNumConfigurations 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 0x0079
+ bNumInterfaces 1
+ bConfigurationValue 1
+ iConfiguration 0
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 896mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 2
+ bInterfaceClass 8 Mass Storage
+ bInterfaceSubClass 6 SCSI
+ bInterfaceProtocol 80 Bulk-Only
+ iInterface 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x82 EP 2 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0400 1x 1024 bytes
+ bInterval 0
+ bMaxBurst 15
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x01 EP 1 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0400 1x 1024 bytes
+ bInterval 0
+ bMaxBurst 15
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 1
+ bNumEndpoints 4
+ bInterfaceClass 8 Mass Storage
+ bInterfaceSubClass 6 SCSI
+ bInterfaceProtocol 98
+ iInterface 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x01 EP 1 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0400 1x 1024 bytes
+ bInterval 0
+ bMaxBurst 0
+ Command pipe (0x01)
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x84 EP 4 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0400 1x 1024 bytes
+ bInterval 0
+ bMaxBurst 15
+ MaxStreams 32
+ Status pipe (0x02)
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x82 EP 2 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0400 1x 1024 bytes
+ bInterval 0
+ bMaxBurst 15
+ MaxStreams 32
+ Data-in pipe (0x03)
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x03 EP 3 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0400 1x 1024 bytes
+ bInterval 0
+ bMaxBurst 15
+ MaxStreams 32
+ Data-out pipe (0x04)
+Binary Object Store Descriptor:
+ bLength 5
+ bDescriptorType 15
+ wTotalLength 0x002a
+ bNumDeviceCaps 3
+ USB 2.0 Extension Device Capability:
+ bLength 7
+ bDescriptorType 16
+ bDevCapabilityType 2
+ bmAttributes 0x0000f41e
+ BESL Link Power Management (LPM) Supported
+ BESL value 1024 us
+ Deep BESL value 61440 us
+ SuperSpeed USB Device Capability:
+ bLength 10
+ bDescriptorType 16
+ bDevCapabilityType 3
+ bmAttributes 0x00
+ wSpeedsSupported 0x000e
+ Device can operate at Full Speed (12Mbps)
+ Device can operate at High Speed (480Mbps)
+ Device can operate at SuperSpeed (5Gbps)
+ bFunctionalitySupport 1
+ Lowest fully-functional device speed is Full Speed (12Mbps)
+ bU1DevExitLat 10 micro seconds
+ bU2DevExitLat 2047 micro seconds
+ SuperSpeedPlus USB Device Capability:
+ bLength 20
+ bDescriptorType 16
+ bDevCapabilityType 10
+ bmAttributes 0x00000001
+ Sublink Speed Attribute count 1
+ Sublink Speed ID count 0
+ wFunctionalitySupport 0x1100
+ bmSublinkSpeedAttr[0] 0x000a4030
+ Speed Attribute ID: 0 10Gb/s Symmetric RX SuperSpeedPlus
+ bmSublinkSpeedAttr[1] 0x000a40b0
+ Speed Attribute ID: 0 10Gb/s Symmetric TX SuperSpeedPlus
+Device Status: 0x0000
+ (Bus Powered)
+
+So ignore UAS driver for this device.
+
+Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn>
+Cc: stable <stable@kernel.org>
+Link: https://lore.kernel.org/r/20250519023328.1498856-1-xiehongyu1@kylinos.cn
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/storage/unusual_uas.h | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/drivers/usb/storage/unusual_uas.h
++++ b/drivers/usb/storage/unusual_uas.h
+@@ -52,6 +52,13 @@ UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x99
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME),
+
++/* Reported-by: Zhihong Zhou <zhouzhihong@greatwall.com.cn> */
++UNUSUAL_DEV(0x0781, 0x55e8, 0x0000, 0x9999,
++ "SanDisk",
++ "",
++ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
++ US_FL_IGNORE_UAS),
++
+ /* Reported-by: Hongling Zeng <zenghongling@kylinos.cn> */
+ UNUSUAL_DEV(0x090c, 0x2000, 0x0000, 0x9999,
+ "Hiksemi",
--- /dev/null
+From f4239ace2dd8606f6824757f192965a95746da05 Mon Sep 17 00:00:00 2001
+From: Qasim Ijaz <qasdev00@gmail.com>
+Date: Tue, 22 Apr 2025 14:47:17 +0100
+Subject: usb: typec: ucsi: fix Clang -Wsign-conversion warning
+
+From: Qasim Ijaz <qasdev00@gmail.com>
+
+commit f4239ace2dd8606f6824757f192965a95746da05 upstream.
+
+debugfs.c emits the following warnings when compiling with the -Wsign-conversion flag with clang 15:
+
+drivers/usb/typec/ucsi/debugfs.c:58:27: warning: implicit conversion changes signedness: 'int' to 'u32' (aka 'unsigned int') [-Wsign-conversion]
+ ucsi->debugfs->status = ret;
+ ~ ^~~
+drivers/usb/typec/ucsi/debugfs.c:71:25: warning: implicit conversion changes signedness: 'u32' (aka 'unsigned int') to 'int' [-Wsign-conversion]
+ return ucsi->debugfs->status;
+ ~~~~~~ ~~~~~~~~~~~~~~~^~~~~~
+
+During ucsi_cmd() we see:
+
+ if (ret < 0) {
+ ucsi->debugfs->status = ret;
+ return ret;
+ }
+
+But "status" is u32 meaning unsigned wrap-around occurs when assigning a value which is < 0 to it, this obscures the real status.
+
+To fix this make the "status" of type int since ret is also of type int.
+
+Fixes: df0383ffad64 ("usb: typec: ucsi: Add debugfs for ucsi commands")
+Cc: stable@vger.kernel.org
+Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
+Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Link: https://lore.kernel.org/r/20250422134717.66218-1-qasdev00@gmail.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/typec/ucsi/ucsi.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/usb/typec/ucsi/ucsi.h
++++ b/drivers/usb/typec/ucsi/ucsi.h
+@@ -302,7 +302,7 @@ struct ucsi_debugfs_entry {
+ u64 low;
+ u64 high;
+ } response;
+- u32 status;
++ int status;
+ struct dentry *dentry;
+ };
+
--- /dev/null
+From 342e4955a1f1ce28c70a589999b76365082dbf10 Mon Sep 17 00:00:00 2001
+From: Dave Penkler <dpenkler@gmail.com>
+Date: Wed, 21 May 2025 14:16:56 +0200
+Subject: usb: usbtmc: Fix timeout value in get_stb
+
+From: Dave Penkler <dpenkler@gmail.com>
+
+commit 342e4955a1f1ce28c70a589999b76365082dbf10 upstream.
+
+wait_event_interruptible_timeout requires a timeout argument
+in units of jiffies. It was being called in usbtmc_get_stb
+with the usb timeout value which is in units of milliseconds.
+
+Pass the timeout argument converted to jiffies.
+
+Fixes: 048c6d88a021 ("usb: usbtmc: Add ioctls to set/get usb timeout")
+Cc: stable@vger.kernel.org
+Signed-off-by: Dave Penkler <dpenkler@gmail.com>
+Link: https://lore.kernel.org/r/20250521121656.18174-4-dpenkler@gmail.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/class/usbtmc.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+--- a/drivers/usb/class/usbtmc.c
++++ b/drivers/usb/class/usbtmc.c
+@@ -483,6 +483,7 @@ static int usbtmc_get_stb(struct usbtmc_
+ u8 tag;
+ int rv;
+ long wait_rv;
++ unsigned long expire;
+
+ dev_dbg(dev, "Enter ioctl_read_stb iin_ep_present: %d\n",
+ data->iin_ep_present);
+@@ -512,10 +513,11 @@ static int usbtmc_get_stb(struct usbtmc_
+ }
+
+ if (data->iin_ep_present) {
++ expire = msecs_to_jiffies(file_data->timeout);
+ wait_rv = wait_event_interruptible_timeout(
+ data->waitq,
+ atomic_read(&data->iin_data_valid) != 0,
+- file_data->timeout);
++ expire);
+ if (wait_rv < 0) {
+ dev_dbg(dev, "wait interrupted %ld\n", wait_rv);
+ rv = wait_rv;
projects / thirdparty / kernel / stable-queue.git / commitdiff
