#include <getopt.h>
+#include <vector>
+#include <algorithm>
+
+using namespace std;
+
#define IN_GCOV 1
#include "gcov-io.h"
#include "gcov-io.c"
typedef struct line_info
{
+ /* Return true when NEEDLE is one of basic blocks the line belongs to. */
+ bool has_block (block_t *needle);
+
gcov_type count; /* execution count */
union
{
unsigned unexceptional : 1;
} line_t;
+bool
+line_t::has_block (block_t *needle)
+{
+ for (block_t *n = u.blocks; n; n = n->chain)
+ if (n == needle)
+ return true;
+
+ return false;
+}
+
/* Describes a file mentioned in the block graph. Contains an array
of line info. */
static void release_function (function_t *);
extern int main (int, char **);
+/* Cycle detection!
+ There are a bajillion algorithms that do this. Boost's function is named
+ hawick_cycles, so I used the algorithm by K. A. Hawick and H. A. James in
+ "Enumerating Circuits and Loops in Graphs with Self-Arcs and Multiple-Arcs"
+ (url at <http://complexity.massey.ac.nz/cstn/013/cstn-013.pdf>).
+
+ The basic algorithm is simple: effectively, we're finding all simple paths
+ in a subgraph (that shrinks every iteration). Duplicates are filtered by
+ "blocking" a path when a node is added to the path (this also prevents non-
+ simple paths)--the node is unblocked only when it participates in a cycle.
+ */
+
+typedef vector<arc_t *> arc_vector_t;
+typedef vector<const block_t *> block_vector_t;
+
+/* Enum with types of loop in CFG. */
+
+enum loop_type
+{
+ NO_LOOP = 0,
+ LOOP = 1,
+ NEGATIVE_LOOP = 3
+};
+
+/* Loop_type operator that merges two values: A and B. */
+
+inline loop_type& operator |= (loop_type& a, loop_type b)
+{
+ return a = static_cast<loop_type> (a | b);
+}
+
+/* Handle cycle identified by EDGES, where the function finds minimum cs_count
+ and subtract the value from all counts. The subtracted value is added
+ to COUNT. Returns type of loop. */
+
+static loop_type
+handle_cycle (const arc_vector_t &edges, int64_t &count)
+{
+ /* Find the minimum edge of the cycle, and reduce all nodes in the cycle by
+ that amount. */
+ int64_t cycle_count = INT64_MAX;
+ for (unsigned i = 0; i < edges.size (); i++)
+ {
+ int64_t ecount = edges[i]->cs_count;
+ if (cycle_count > ecount)
+ cycle_count = ecount;
+ }
+ count += cycle_count;
+ for (unsigned i = 0; i < edges.size (); i++)
+ edges[i]->cs_count -= cycle_count;
+
+ return cycle_count < 0 ? NEGATIVE_LOOP : LOOP;
+}
+
+/* Unblock a block U from BLOCKED. Apart from that, iterate all blocks
+ blocked by U in BLOCK_LISTS. */
+
+static void
+unblock (const block_t *u, block_vector_t &blocked,
+ vector<block_vector_t > &block_lists)
+{
+ block_vector_t::iterator it = find (blocked.begin (), blocked.end (), u);
+ if (it == blocked.end ())
+ return;
+
+ unsigned index = it - blocked.begin ();
+ blocked.erase (it);
+
+ for (block_vector_t::iterator it2 = block_lists[index].begin ();
+ it2 != block_lists[index].end (); it2++)
+ unblock (*it2, blocked, block_lists);
+ for (unsigned j = 0; j < block_lists[index].size (); j++)
+ unblock (u, blocked, block_lists);
+
+ block_lists.erase (block_lists.begin () + index);
+}
+
+/* Find circuit going to block V, PATH is provisional seen cycle.
+ BLOCKED is vector of blocked vertices, BLOCK_LISTS contains vertices
+ blocked by a block. COUNT is accumulated count of the current LINE.
+ Returns what type of loop it contains. */
+
+static loop_type
+circuit (block_t *v, arc_vector_t &path, block_t *start,
+ block_vector_t &blocked, vector<block_vector_t> &block_lists,
+ line_t &linfo, int64_t &count)
+{
+ loop_type result = NO_LOOP;
+
+ /* Add v to the block list. */
+ gcc_assert (find (blocked.begin (), blocked.end (), v) == blocked.end ());
+ blocked.push_back (v);
+ block_lists.push_back (block_vector_t ());
+
+ for (arc_t *arc = v->succ; arc; arc = arc->succ_next)
+ {
+ block_t *w = arc->dst;
+ if (w < start || !linfo.has_block (w))
+ continue;
+
+ path.push_back (arc);
+ if (w == start)
+ /* Cycle has been found. */
+ result |= handle_cycle (path, count);
+ else if (find (blocked.begin (), blocked.end (), w) == blocked.end ())
+ result |= circuit (w, path, start, blocked, block_lists, linfo, count);
+
+ path.pop_back ();
+ }
+
+ if (result != NO_LOOP)
+ unblock (v, blocked, block_lists);
+ else
+ for (arc_t *arc = v->succ; arc; arc = arc->succ_next)
+ {
+ block_t *w = arc->dst;
+ if (w < start || !linfo.has_block (w))
+ continue;
+
+ size_t index
+ = find (blocked.begin (), blocked.end (), w) - blocked.begin ();
+ gcc_assert (index < blocked.size ());
+ block_vector_t &list = block_lists[index];
+ if (find (list.begin (), list.end (), v) == list.end ())
+ list.push_back (v);
+ }
+
+ return result;
+}
+
+/* Find cycles for a LINFO. If HANDLE_NEGATIVE_CYCLES is set and the line
+ contains a negative loop, then perform the same function once again. */
+
+static gcov_type
+get_cycles_count (line_t &linfo, bool handle_negative_cycles = true)
+{
+ /* Note that this algorithm works even if blocks aren't in sorted order.
+ Each iteration of the circuit detection is completely independent
+ (except for reducing counts, but that shouldn't matter anyways).
+ Therefore, operating on a permuted order (i.e., non-sorted) only
+ has the effect of permuting the output cycles. */
+
+ loop_type result = NO_LOOP;
+ gcov_type count = 0;
+ for (block_t *block = linfo.u.blocks; block; block = block->chain)
+ {
+ arc_vector_t path;
+ block_vector_t blocked;
+ vector<block_vector_t > block_lists;
+ result |= circuit (block, path, block, blocked, block_lists, linfo,
+ count);
+ }
+
+ /* If we have a negative cycle, repeat the find_cycles routine. */
+ if (result == NEGATIVE_LOOP && handle_negative_cycles)
+ count += get_cycles_count (linfo, false);
+
+ return count;
+}
+
int
main (int argc, char **argv)
{
arc_t *arc;
for (arc = block->pred; arc; arc = arc->pred_next)
- {
- if (arc->src->u.cycle.ident != ix)
- count += arc->count;
- if (flag_branches)
- add_branch_counts (&src->coverage, arc);
- }
-
- /* Initialize the cs_count. */
- for (arc = block->succ; arc; arc = arc->succ_next)
- arc->cs_count = arc->count;
+ if (flag_branches)
+ add_branch_counts (&src->coverage, arc);
}
- /* Find the loops. This uses the algorithm described in
- Tiernan 'An Efficient Search Algorithm to Find the
- Elementary Circuits of a Graph', CACM Dec 1970. We hold
- the P array by having each block point to the arc that
- connects to the previous block. The H array is implicitly
- held because of the arc ordering, and the block's
- previous arc pointer.
-
- Although the algorithm is O(N^3) for highly connected
- graphs, at worst we'll have O(N^2), as most blocks have
- only one or two exits. Most graphs will be small.
-
- For each loop we find, locate the arc with the smallest
- transition count, and add that to the cumulative
- count. Decrease flow over the cycle and remove the arc
- from consideration. */
+ /* Cycle detection. */
for (block = line->u.blocks; block; block = block->chain)
{
- block_t *head = block;
- arc_t *arc;
-
- next_vertex:;
- arc = head->succ;
- current_vertex:;
- while (arc)
- {
- block_t *dst = arc->dst;
- if (/* Already used that arc. */
- arc->cycle
- /* Not to same graph, or before first vertex. */
- || dst->u.cycle.ident != ix
- /* Already in path. */
- || dst->u.cycle.arc)
- {
- arc = arc->succ_next;
- continue;
- }
-
- if (dst == block)
- {
- /* Found a closing arc. */
- gcov_type cycle_count = arc->cs_count;
- arc_t *cycle_arc = arc;
- arc_t *probe_arc;
-
- /* Locate the smallest arc count of the loop. */
- for (dst = head; (probe_arc = dst->u.cycle.arc);
- dst = probe_arc->src)
- if (cycle_count > probe_arc->cs_count)
- {
- cycle_count = probe_arc->cs_count;
- cycle_arc = probe_arc;
- }
-
- count += cycle_count;
- cycle_arc->cycle = 1;
-
- /* Remove the flow from the cycle. */
- arc->cs_count -= cycle_count;
- for (dst = head; (probe_arc = dst->u.cycle.arc);
- dst = probe_arc->src)
- probe_arc->cs_count -= cycle_count;
-
- /* Unwind to the cyclic arc. */
- while (head != cycle_arc->src)
- {
- arc = head->u.cycle.arc;
- head->u.cycle.arc = NULL;
- head = arc->src;
- }
- /* Move on. */
- arc = arc->succ_next;
- continue;
- }
-
- /* Add new block to chain. */
- dst->u.cycle.arc = arc;
- head = dst;
- goto next_vertex;
- }
- /* We could not add another vertex to the path. Remove
- the last vertex from the list. */
- arc = head->u.cycle.arc;
- if (arc)
- {
- /* It was not the first vertex. Move onto next arc. */
- head->u.cycle.arc = NULL;
- head = arc->src;
- arc = arc->succ_next;
- goto current_vertex;
- }
- /* Mark this block as unusable. */
- block->u.cycle.ident = ~0U;
+ for (arc_t *arc = block->pred; arc; arc = arc->pred_next)
+ if (!line->has_block (arc->src))
+ count += arc->count;
+ for (arc_t *arc = block->succ; arc; arc = arc->succ_next)
+ arc->cs_count = arc->count;
}
+ /* Now, add the count of loops entirely on this line. */
+ count += get_cycles_count (*line);
line->count = count;
}
projects / thirdparty / gcc.git / commitdiff
