dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-picoitx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-edm-g-wb.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-mate.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-pro.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-pulse.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-ripple.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-iota2-lumpy.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-bl-osm-s.dtb
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+
+/ {
+ model = "SolidRun i.MX8MP HummingBoard Mate";
+ compatible = "solidrun,imx8mp-hummingboard-mate",
+ "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &eqos;
+ /delete-property/ ethernet1;
+ };
+};
+
+&fec {
+ /* this board does not use second phy / ethernet on SoM */
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&mikro_rst_pins>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-codec.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+#include "imx8mp-hummingboard-pulse-m2con.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+ model = "SolidRun i.MX8MP HummingBoard Pro";
+ compatible = "solidrun,imx8mp-hummingboard-pro",
+ "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &eqos;
+ ethernet1 = &fec;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&hdmi_pins>,
+ <&m2_wwan_wake_pins>;
+};
+
+&pcie {
+ pinctrl-0 = <&m2_reset_pins>;
+ pinctrl-names = "default";
+ reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pcie_phy {
+ clocks = <&hsio_blk_ctrl>;
+ clock-names = "ref";
+ fsl,clkreq-unsupported;
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+ status = "okay";
+};
+
+&phy0 {
+ leds {
+ /* ADIN1300 LED_0 pin */
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_ORANGE>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+
+ /delete-node/ led@1;
+ };
+};
+
+&phy1 {
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* ADIN1300 LED_0 pin */
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+ sound-wm8904 {
+ compatible = "fsl,imx-audio-wm8904";
+ model = "audio-wm8904";
+ audio-cpu = <&sai3>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "AMIC", "MICBIAS",
+ "IN2R", "AMIC";
+ };
+};
+
+&i2c2 {
+ codec: audio-codec@1a {
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ #sound-dai-cells = <0>;
+ clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+ clock-names = "mclk";
+ AVDD-supply = <&v_1_8>;
+ CPVDD-supply = <&v_1_8>;
+ DBVDD-supply = <&v_3_3>;
+ DCVDD-supply = <&v_1_8>;
+ MICVDD-supply = <&v_3_3>;
+ };
+};
+
+&iomuxc {
+ sai3_pins: pinctrl-sai3-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6
+ MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6
+ MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6
+ MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6
+ MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6
+ >;
+ };
+};
+
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sai3_pins>;
+ assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <12288000>;
+ clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_IPG>, <&clk IMX8MP_CLK_DUMMY>,
+ <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>, <&clk IMX8MP_CLK_DUMMY>,
+ <&clk IMX8MP_CLK_DUMMY>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+ aliases {
+ rtc0 = &carrier_rtc;
+ rtc1 = &snvs_rtc;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ led-0 {
+ label = "D30";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led-1 {
+ label = "D31";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led-2 {
+ label = "D32";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led-3 {
+ label = "D33";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led-4 {
+ label = "D34";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ rfkill-mpcie-wifi {
+ /*
+ * The mpcie connector only has USB,
+ * therefore this rfkill is for cellular radios only.
+ */
+ compatible = "rfkill-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpcie_rfkill_pins>;
+ label = "mpcie radio";
+ radio-type = "wwan";
+ /* rfkill-gpio inverts internally */
+ shutdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ vmmc: regulator-mmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vmmc_pins>;
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <250>;
+ };
+
+ vbus1: regulator-vbus-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus1";
+ gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vbus1_pins>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vbus2: regulator-vbus-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus2";
+ gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vbus2_pins>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ v_1_2: regulator-1-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vmpcie {
+ /* supplies mpcie and m2 connectors */
+ compatible = "regulator-fixed";
+ regulator-name = "vmpcie";
+ gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vmpcie_pins>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+/* mikrobus spi */
+&ecspi2 {
+ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mikro_spi_pins>;
+ status = "okay";
+};
+
+&gpio1 {
+ pinctrl-0 = <&mpcie_reset_pins>;
+ pinctrl-names = "default";
+
+ mpcie-reset-hog {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "mpcie-reset";
+ };
+};
+
+&i2c3 {
+ carrier_eeprom: eeprom@57{
+ compatible = "st,24c02", "atmel,24c02";
+ reg = <0x57>;
+ pagesize = <16>;
+ };
+
+ carrier_rtc: rtc@69 {
+ compatible = "abracon,ab1805";
+ reg = <0x69>;
+ abracon,tc-diode = "schottky";
+ abracon,tc-resistor = <3>;
+ };
+};
+
+&iomuxc {
+ csi_pins: pinctrl-csi-grp {
+ fsl,pins = <
+ /* Pin 24: STROBE */
+ MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x0
+ >;
+ };
+
+ led_pins: pinctrl-led-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x0
+ MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x0
+ MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23 0x0
+ MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x0
+ MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28 0x0
+ >;
+ };
+
+ mikro_int_pins: pinctrl-mikro-int-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x0
+ >;
+ };
+
+ mikro_pwm_pins: pinctrl-mikro-pwm-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08 0x0
+ >;
+ };
+
+ mikro_rst_pins: pinctrl-mikro-rst-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x0
+ >;
+ };
+
+ mikro_spi_pins: pinctrl-mikro-spi-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0 0x40000
+ MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x82
+ MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x82
+ MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x82
+ >;
+ };
+
+ mikro_uart_pins: pinctrl-mikro-uart-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x140
+ MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX 0x140
+ >;
+ };
+
+ mpcie_reset_pins: pinctrl-mpcie-reset-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x0
+ >;
+ };
+
+ mpcie_rfkill_pins: pinctrl-pcie-rfkill-grp {
+ fsl,pins = <
+ /* weak i/o, open drain */
+ MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x20
+ >;
+ };
+
+ usb_hub_pins: pinctrl-usb-hub-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x0
+ >;
+ };
+
+ usdhc2_pins: pinctrl-usdhc2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140
+ MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140
+ >;
+ };
+
+ usdhc2_100mhz_pins: pinctrl-usdhc2-100mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140
+ MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140
+ >;
+ };
+
+ usdhc2_200mhz_pins: pinctrl-usdhc2-200mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140
+ MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140
+ >;
+ };
+
+ vbus1_pins: pinctrl-vbus-1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x20
+ >;
+ };
+
+ vbus2_pins: pinctrl-vbus-2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x20
+ >;
+ };
+
+ vmmc_pins: pinctrl-vmmc-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
+ >;
+ };
+
+ vmpcie_pins: pinctrl-vmpcie-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x0
+ >;
+ };
+};
+
+&phy0 {
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* ADIN1300 LED_0 pin */
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_ORANGE>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+
+ /* ADIN1300 LINK_ST pin */
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+ };
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+/* mikrobus uart */
+&uart3 {
+ status = "okay";
+};
+
+&usb3_phy0 {
+ fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+ vbus-supply = <&vbus2>;
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_phy1 {
+ vbus-supply = <&vbus1>;
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_hub_pins>;
+
+ hub_2_0: hub@1 {
+ compatible = "usb4b4,6502", "usb4b4,6506";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&v_1_2>;
+ vdd2-supply = <&v_3_3>;
+ };
+
+ hub_3_0: hub@2 {
+ compatible = "usb4b4,6500", "usb4b4,6504";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&v_1_2>;
+ vdd2-supply = <&v_3_3>;
+ };
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&usdhc2_pins>;
+ pinctrl-1 = <&usdhc2_100mhz_pins>;
+ pinctrl-2 = <&usdhc2_200mhz_pins>;
+ vmmc-supply = <&vmmc>;
+ bus-width = <4>;
+ cap-power-off-card;
+ full-pwr-cycle;
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+ sound-hdmi {
+ compatible = "fsl,imx-audio-hdmi";
+ model = "audio-hdmi";
+ audio-cpu = <&aud2htx>;
+ hdmi-out;
+ };
+};
+
+&aud2htx {
+ status = "okay";
+};
+
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ status = "okay";
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
+&iomuxc {
+ hdmi_pins: pinctrl-hdmi-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c3
+ MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c3
+ MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x154
+ MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x154
+ >;
+ };
+};
+
+&lcdif3 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+ rfkill-m2-gnss {
+ compatible = "rfkill-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&m2_gnss_rfkill_pins>;
+ label = "m.2 GNSS";
+ radio-type = "gps";
+ /* rfkill-gpio inverts internally */
+ shutdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* M.2 is B-keyed, so w-disable is for WWAN */
+ rfkill-m2-wwan {
+ compatible = "rfkill-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&m2_wwan_rfkill_pins>;
+ label = "m.2 WWAN";
+ radio-type = "wwan";
+ /* rfkill-gpio inverts internally */
+ shutdown-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&iomuxc {
+ m2_gnss_rfkill_pins: pinctrl-m2-gnss-rfkill-grp {
+ fsl,pins = <
+ /* weak i/o, open drain */
+ MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x20
+ >;
+ };
+
+ m2_reset_pins: pinctrl-m2-reset-grp {
+ fsl,pins = <
+ /*
+ * 3.3V domain on SoC, set open-drain to ensure
+ * 1.8V logic on connector
+ */
+ MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x20
+ >;
+ };
+
+ m2_wwan_rfkill_pins: pinctrl-m2-wwan-rfkill-grp {
+ fsl,pins = <
+ /* weak i/o, open drain */
+ MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x20
+ >;
+ };
+
+ m2_wwan_wake_pins: pinctrl-m2-wwan-wake-grp {
+ fsl,pins = <
+ /* weak i/o, open drain */
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x20
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "c";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&adv7535_out>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ hdmi@3d {
+ compatible = "adi,adv7535";
+ reg = <0x3d>, <0x3f>, <0x3c>, <0x38>;
+ reg-names = "main", "edid", "cec", "packet";
+ adi,dsi-lanes = <4>;
+ avdd-supply = <&v_1_8>;
+ dvdd-supply = <&v_1_8>;
+ pvdd-supply = <&v_1_8>;
+ a2vdd-supply = <&v_1_8>;
+ v3p3-supply = <&v_3_3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mini_hdmi_pins>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ adv7535_from_dsim: endpoint {
+ remote-endpoint = <&dsim_to_adv7535>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ adv7535_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+};
+
+&iomuxc {
+ mini_hdmi_pins: pinctrl-mini-hdmi-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x0
+ >;
+ };
+};
+
+&lcdif1 {
+ status = "okay";
+};
+
+&mipi_dsi {
+ samsung,esc-clock-frequency = <10000000>;
+ status = "okay";
+
+ port@1 {
+ dsim_to_adv7535: endpoint {
+ remote-endpoint = <&adv7535_from_dsim>;
+ attach-bridge;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-codec.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+#include "imx8mp-hummingboard-pulse-m2con.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+ model = "SolidRun i.MX8MP HummingBoard Pulse";
+ compatible = "solidrun,imx8mp-hummingboard-pulse",
+ "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &eqos;
+ ethernet1 = &pcie_eth;
+ };
+};
+
+&fec {
+ /* this board does not use second phy / ethernet on SoM */
+ status = "disabled";
+};
+
+&gpio1 {
+ pinctrl-0 = <&mpcie_reset_pins>, <&m2_reset_pins>;
+ pinctrl-names = "default";
+
+ m2-reset-hog {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "m2-reset";
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&hdmi_pins>,
+ <&m2_wwan_wake_pins>;
+
+ pcie_eth_pins: pinctrl-pcie-eth-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x0
+ >;
+ };
+};
+
+&pcie {
+ pinctrl-0 = <&pcie_eth_pins>;
+ pinctrl-names = "default";
+ reset-gpio = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ root@0,0 {
+ compatible = "pci16c3,abcd";
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ /* Intel i210 */
+ pcie_eth: ethernet@1,0 {
+ compatible = "pci8086,157b";
+ reg = <0x00010000 0 0 0 0>;
+ };
+ };
+};
+
+&pcie_phy {
+ clocks = <&hsio_blk_ctrl>;
+ clock-names = "ref";
+ fsl,clkreq-unsupported;
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+ model = "SolidRun i.MX8MP HummingBoard Ripple";
+ compatible = "solidrun,imx8mp-hummingboard-ripple",
+ "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &eqos;
+ /delete-property/ ethernet1;
+ };
+};
+
+&fec {
+ /* this board does not use second phy / ethernet on SoM */
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&mikro_rst_pins>;
+};
projects / thirdparty / kernel / stable.git / commitdiff
