mISDN: Fix typos

Fix typos:
  - syncronized -> synchronized
  - interfacs -> interface
  - otherwhise -> otherwise
  - ony -> only
  - busses -> buses
  - maxinum -> maximum

Via codespell.

Reported-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241106112513.9559-1-algonell@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index e5a483fd9ad86f5878b9fcb5a603025aa8b68cb7..45ff0e198f8f505fe57e34ab3f7e72827f7bfa89 100644 (file)
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -25,8 +25,8 @@
  *     Bit 8     = 0x00100 = uLaw (instead of aLaw)
  *     Bit 9     = 0x00200 = Disable DTMF detect on all B-channels via hardware
  *     Bit 10    = spare
- *     Bit 11    = 0x00800 = Force PCM bus into slave mode. (otherwhise auto)
- * or   Bit 12    = 0x01000 = Force PCM bus into master mode. (otherwhise auto)
+ *     Bit 11    = 0x00800 = Force PCM bus into slave mode. (otherwise auto)
+ * or   Bit 12    = 0x01000 = Force PCM bus into master mode. (otherwise auto)
  *     Bit 13    = spare
  *     Bit 14    = 0x04000 = Use external ram (128K)
  *     Bit 15    = 0x08000 = Use external ram (512K)
@@ -41,7 +41,7 @@
  * port: (optional or required for all ports on all installed cards)
  *     HFC-4S/HFC-8S only bits:
  *     Bit 0     = 0x001 = Use master clock for this S/T interface
- *                         (ony once per chip).
+ *                         (only once per chip).
  *     Bit 1     = 0x002 = transmitter line setup (non capacitive mode)
  *                         Don't use this unless you know what you are doing!
  *     Bit 2     = 0x004 = Disable E-channel. (No E-channel processing)
@@ -82,7 +82,7 @@
  *     By default (0), the PCM bus id is 100 for the card that is PCM master.
  *     If multiple cards are PCM master (because they are not interconnected),
  *     each card with PCM master will have increasing PCM id.
- *     All PCM busses with the same ID are expected to be connected and have
+ *     All PCM buses with the same ID are expected to be connected and have
  *     common time slots slots.
  *     Only one chip of the PCM bus must be master, the others slave.
  *     -1 means no support of PCM bus not even.
@@ -930,7 +930,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
        if (newmaster) {
                hc = newmaster;
                if (debug & DEBUG_HFCMULTI_PLXSD)
-                       printk(KERN_DEBUG "id=%d (0x%p) = syncronized with "
+                       printk(KERN_DEBUG "id=%d (0x%p) = synchronized with "
                               "interface.\n", hc->id, hc);
                /* Enable new sync master */
                plx_acc_32 = hc->plx_membase + PLX_GPIOC;
@@ -949,7 +949,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
                        hc = pcmmaster;
                        if (debug & DEBUG_HFCMULTI_PLXSD)
                                printk(KERN_DEBUG
-                                      "id=%d (0x%p) = PCM master syncronized "
+                                      "id=%d (0x%p) = PCM master synchronized "
                                       "with QUARTZ\n", hc->id, hc);
                        if (hc->ctype == HFC_TYPE_E1) {
                                /* Use the crystal clock for the PCM
@@ -2001,7 +2001,7 @@ next_frame:
        if (Zspace <= 0)
                Zspace += hc->Zlen;
        Zspace -= 4; /* keep not too full, so pointers will not overrun */
-       /* fill transparent data only to maxinum transparent load (minus 4) */
+       /* fill transparent data only to maximum transparent load (minus 4) */
        if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
                Zspace = Zspace - hc->Zlen + hc->max_trans;
        if (Zspace <= 0) /* no space of 4 bytes */
@@ -4672,7 +4672,7 @@ init_e1_port_hw(struct hfc_multi *hc, struct hm_map *m)
                        if (debug & DEBUG_HFCMULTI_INIT)
                                printk(KERN_DEBUG
                                       "%s: PORT set optical "
-                                      "interfacs: card(%d) "
+                                      "interface: card(%d) "
                                       "port(%d)\n",
                                       __func__,
                                       HFC_cnt + 1, 1);