tegra20-ventana.dtb \
tegra20-colibri.dtb \
tegra30-apalis.dtb \
+ tegra30-asus-nexus7-grouper-PM269.dtb \
+ tegra30-asus-nexus7-grouper-E1565.dtb \
+ tegra30-asus-nexus7-tilapia-E1565.dtb \
+ tegra30-asus-p1801-t.dtb \
+ tegra30-asus-tf201.dtb \
+ tegra30-asus-tf300t.dtb \
+ tegra30-asus-tf300tg.dtb \
+ tegra30-asus-tf300tl.dtb \
+ tegra30-asus-tf600t.dtb \
+ tegra30-asus-tf700t.dtb \
tegra30-beaver.dtb \
tegra30-cardhu.dtb \
tegra30-colibri.dtb \
+ tegra30-htc-endeavoru.dtb \
+ tegra30-lg-p880.dtb \
+ tegra30-lg-p895.dtb \
tegra30-tec-ng.dtb \
tegra114-dalmore.dtb \
tegra124-apalis.dtb \
spi@7000c380 {
status = "okay";
- spi-max-frequency = <25000000>;
+ spi-max-frequency = <48000000>;
+
+ flash@0 {
+ compatible = "winbond,w25q80bl", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <48000000>;
+ };
};
pcie@80003000 {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/input.h>
+
+#include "tegra30.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uarta;
+ };
+
+ aliases {
+ i2c0 = &pwr_i2c;
+
+ mmc0 = &sdmmc4; /* eMMC */
+
+ rtc0 = &pmic;
+ rtc1 = "/rtc@7000e000";
+
+ usb0 = &usb1;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ host1x@50000000 {
+ dc@54200000 {
+ nvidia,180-rotation;
+ rgb {
+ status = "okay";
+
+ nvidia,panel = <&panel>;
+ };
+ };
+ };
+
+ gpio@6000d000 {
+ volume-buttons-hog {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>,
+ <TEGRA_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+ };
+
+ uarta: serial@70006000 {
+ status = "okay";
+ };
+
+ pwm: pwm@7000a000 {
+ status = "okay";
+ };
+
+ pwr_i2c: i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+ };
+
+ sdmmc4: sdhci@78000600 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ };
+
+ usb1: usb@7d000000 {
+ status = "okay";
+ dr_mode = "otg";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <&vdd_5v0_bl>;
+ pwms = <&pwm 0 50000>;
+
+ brightness-levels = <1 35 70 105 140 175 210 255>;
+ default-brightness-level = <5>;
+ };
+
+ /* PMIC has a built-in 32KHz oscillator which is used by PMC */
+ clk32k_in: clock-32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "pmic-oscillator";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ENTER>;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_UP>;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_DOWN>;
+ };
+ };
+
+ panel: panel {
+ compatible = "simple-panel";
+
+ power-supply = <&vdd_pnl_reg>;
+ enable-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_HIGH>;
+
+ backlight = <&backlight>;
+
+ display-timings {
+ timing@0 {
+ /* 1280x800@60Hz */
+ clock-frequency = <68000000>;
+
+ hactive = <800>;
+ hfront-porch = <24>;
+ hback-porch = <32>;
+ hsync-len = <24>;
+
+ vactive = <1280>;
+ vfront-porch = <5>;
+ vback-porch = <32>;
+ vsync-len = <1>;
+ };
+ };
+ };
+
+ vdd_pnl_reg: regulator-pnl {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_panel";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vdd_5v0_bl: regulator-bl {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0_bl";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-grouper-common.dtsi"
+
+/ {
+ model = "ASUS Google Nexus 7 (Project Nakasi / ME370T) E1565";
+ compatible = "asus,grouper", "nvidia,tegra30";
+
+ i2c@7000d000 {
+ pmic: max77663@3c {
+ compatible = "maxim,max77663";
+ reg = <0x3c>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ regulators {
+ vdd_1v8: sd2 {
+ regulator-name = "vdd_1v8_gen";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* eMMC VDD */
+ vcore_emmc: ldo3 {
+ regulator-name = "vcore_emmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-grouper-common.dtsi"
+
+/ {
+ model = "ASUS Google Nexus 7 (Project Nakasi / ME370T) PM269";
+ compatible = "asus,grouper", "nvidia,tegra30";
+
+ i2c@7000d000 {
+ /* Texas Instruments TPS659110 PMIC */
+ pmic: tps65911@2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ regulators {
+ /* eMMC VDD */
+ vcore_emmc: ldo1 {
+ regulator-name = "vdd_emmc_core";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-grouper-common.dtsi"
+
+/ {
+ model = "ASUS Google Nexus 7 (Project Bach / ME370TG) E1565";
+ compatible = "asus,tilapia", "nvidia,tegra30";
+
+ i2c@7000d000 {
+ pmic: max77663@3c {
+ compatible = "maxim,max77663";
+ reg = <0x3c>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ regulators {
+ vdd_1v8: sd2 {
+ regulator-name = "vdd_1v8_gen";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* eMMC VDD */
+ vcore_emmc: ldo3 {
+ regulator-name = "vcore_emmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ panel {
+ display-timings {
+ timing@0 {
+ /* 1280x800@60Hz */
+ clock-frequency = <81750000>;
+
+ hactive = <800>;
+ hfront-porch = <64>;
+ hback-porch = <128>;
+ hsync-len = <64>;
+
+ vactive = <1280>;
+ vfront-porch = <5>;
+ vback-porch = <2>;
+ vsync-len = <1>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer.dtsi"
+
+/ {
+ model = "ASUS Portable AiO P1801-T";
+ compatible = "asus,p1801-t", "nvidia,tegra30";
+
+ /delete-node/ host1x@50000000;
+ /delete-node/ pwm@7000a000;
+
+ /delete-node/ backlight;
+ /delete-node/ panel;
+
+ /delete-node/ regulator-pnl;
+ /delete-node/ regulator-bl;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer.dtsi"
+
+/ {
+ model = "ASUS Transformer Prime TF201";
+ compatible = "asus,tf201", "nvidia,tegra30";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer.dtsi"
+
+/ {
+ model = "ASUS Transformer Pad TF300T";
+ compatible = "asus,tf300t", "nvidia,tegra30";
+
+ gpio@6000d000 {
+ volume-buttons-hog {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>,
+ <TEGRA_GPIO(K, 7) GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer.dtsi"
+
+/ {
+ model = "ASUS Transformer Pad 3G TF300TG";
+ compatible = "asus,tf300tg", "nvidia,tegra30";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer.dtsi"
+
+/ {
+ model = "ASUS Transformer Pad LTE TF300TL";
+ compatible = "asus,tf300tl", "nvidia,tegra30";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer.dtsi"
+
+/ {
+ model = "ASUS VivoTab RT TF600T";
+ compatible = "asus,tf600t", "nvidia,tegra30";
+
+ aliases {
+ spi0 = &spi4;
+ };
+
+ /delete-node/ host1x@50000000;
+
+ pmic_i2c: i2c@7000d000 {
+ /* Texas Instruments TPS659110 PMIC */
+ pmic: tps65911@2d {
+ regulators {
+ vdd_1v2_bl: vdd1 {
+ regulator-name = "vdd_1v2_backlight";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <8>;
+ };
+
+ /delete-node/ ldo2;
+ /delete-node/ ldo3;
+
+ /* uSD slot VDDIO */
+ vddio_usd: ldo5 {
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ avdd_dsi_csi: ldo6 {
+ regulator-name = "avdd_dsi_csi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ };
+ };
+ };
+
+ spi4: spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+
+ spi-flash@1 {
+ compatible = "winbond,w25q32", "jedec,spi-nor";
+ reg = <1>;
+ spi-max-frequency = <20000000>;
+ };
+ };
+
+ backlight {
+ power-supply = <&vdd_1v2_bl>;
+ };
+
+ gpio-keys {
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_UP>;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_DOWN>;
+ };
+ };
+
+ /delete-node/ panel;
+
+ vdd_usd: regulator-usd {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_usd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /delete-node/ regulator-pnl;
+ /delete-node/ regulator-bl;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer.dtsi"
+
+/ {
+ model = "ASUS Transformer Infinity TF700T";
+ compatible = "asus,tf700t", "nvidia,tegra30";
+
+ /delete-node/ host1x@50000000;
+
+ /delete-node/ panel;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/input.h>
+
+#include "tegra30.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uarta;
+ };
+
+ aliases {
+ i2c0 = &pwr_i2c;
+ i2c1 = &gen1_i2c;
+
+ mmc0 = &sdmmc4; /* eMMC */
+ mmc1 = &sdmmc1; /* uSD slot */
+
+ rtc0 = &pmic;
+ rtc1 = "/rtc@7000e000";
+
+ usb0 = &usb1;
+ usb1 = &usb3; /* Dock USB */
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+
+ nvidia,panel = <&panel>;
+ };
+ };
+ };
+
+ uarta: serial@70006000 {
+ status = "okay";
+ };
+
+ pwm: pwm@7000a000 {
+ status = "okay";
+ };
+
+ gen1_i2c: i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ pwr_i2c: i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* Texas Instruments TPS659110 PMIC */
+ pmic: tps65911@2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ regulators {
+ /* eMMC VDD */
+ vcore_emmc: ldo1 {
+ regulator-name = "vdd_emmc_core";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* uSD slot VDD */
+ vdd_usd: ldo2 {
+ regulator-name = "vdd_usd";
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ };
+
+ /* uSD slot VDDIO */
+ vddio_usd: ldo3 {
+ regulator-name = "vddio_usd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3100000>;
+ };
+ };
+ };
+ };
+
+ sdmmc1: sdhci@78000000 {
+ status = "okay";
+ bus-width = <4>;
+
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
+
+ vmmc-supply = <&vdd_usd>;
+ vqmmc-supply = <&vddio_usd>;
+ };
+
+ sdmmc4: sdhci@78000600 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ };
+
+ /* USB via ASUS connector */
+ usb1: usb@7d000000 {
+ status = "okay";
+ dr_mode = "otg";
+ };
+
+ /* Dock's USB port */
+ usb3: usb@7d008000 {
+ status = "okay";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <&vdd_5v0_bl>;
+ pwms = <&pwm 0 4000000>;
+
+ brightness-levels = <1 35 70 105 140 175 210 255>;
+ default-brightness-level = <5>;
+ };
+
+ /* PMIC has a built-in 32KHz oscillator which is used by PMC */
+ clk32k_in: clock-32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "pmic-oscillator";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ENTER>;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_UP>;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_DOWN>;
+ };
+ };
+
+ panel: panel {
+ compatible = "simple-panel";
+
+ power-supply = <&vdd_pnl_reg>;
+ enable-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_HIGH>;
+
+ backlight = <&backlight>;
+
+ display-timings {
+ timing@0 {
+ /* 1280x800@60Hz */
+ clock-frequency = <68000000>;
+
+ hactive = <1280>;
+ hfront-porch = <48>;
+ hback-porch = <18>;
+ hsync-len = <30>;
+
+ vactive = <800>;
+ vfront-porch = <3>;
+ vback-porch = <12>;
+ vsync-len = <5>;
+ };
+ };
+ };
+
+ vdd_pnl_reg: regulator-pnl {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_panel";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vdd_5v0_bl: regulator-bl {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0_bl";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/* This dts file describes the HTC One X smartphone */
+/* CPU Speedo ID 4, Soc Speedo ID 1, CPU Process: 1, Core Process: 0 */
+
+#include <dt-bindings/input/input.h>
+
+#include "tegra30.dtsi"
+
+/ {
+ model = "HTC One X";
+ compatible = "htc,endeavoru", "nvidia,tegra30";
+
+ chosen {
+ stdout-path = &uarta;
+ };
+
+ aliases {
+ i2c0 = &pwr_i2c;
+
+ mmc0 = &sdmmc4; /* eMMC */
+
+ rtc0 = &pmic;
+ rtc1 = "/rtc@7000e000";
+
+ usb0 = µ_usb;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ host1x@50000000 {
+ dc@54200000 {
+ clocks = <&tegra_car TEGRA30_CLK_DISP1>,
+ <&tegra_car TEGRA30_CLK_PLL_D_OUT0>;
+
+ rgb {
+ status = "okay";
+
+ nvidia,panel = <&dsia>;
+ };
+ };
+
+ dsia: dsi@54300000 {
+ status = "okay";
+
+ avdd-dsi-csi-supply = <&avdd_dsi_csi>;
+
+ panel = <&panel>;
+ };
+ };
+
+ uarta: serial@70006000 {
+ status = "okay";
+ };
+
+ pwr_i2c: i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ /* Texas Instruments TPS80032 PMIC */
+ pmic: tps80032@48 {
+ compatible = "ti,tps80032";
+ reg = <0x48>;
+
+ regulators {
+ /* DSI VDD */
+ avdd_dsi_csi: ldo1 {
+ regulator-name = "avdd_dsi_csi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ sdmmc4: sdhci@78000600 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ };
+
+ micro_usb: usb@7d000000 {
+ status = "okay";
+ dr_mode = "otg";
+ };
+
+ backlight: backlight {
+ compatible = "nvidia,tegra-pwm-backlight";
+
+ nvidia,pwm-source = <1>;
+ nvidia,default-brightness = <0x8E>;
+ };
+
+ /* PMIC has a built-in 32KHz oscillator which is used by PMC */
+ clk32k_in: clock-32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "pmic-oscillator";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ENTER>;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_UP>;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&gpio TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_DOWN>;
+ };
+ };
+
+ panel: panel {
+ compatible = "htc,edge-panel";
+
+ reset-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+
+ vdd-supply = <&vdd_3v3_panel>;
+ vddio-supply = <&vdd_1v8_panel>;
+
+ backlight = <&backlight>;
+ };
+
+ vcore_emmc: regulator-emmc {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_2v85_sdmmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ gpio = <&gpio TEGRA_GPIO(M, 3) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vdd_3v3_panel: regulator-lcm {
+ compatible = "regulator-fixed";
+ regulator-name = "v_lcm_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio TEGRA_GPIO(E, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vdd_1v8_panel: regulator-lcmio {
+ compatible = "regulator-fixed";
+ regulator-name = "v_lcmio_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio TEGRA_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-lg-x3.dtsi"
+
+/ {
+ model = "LG Optimus 4X HD";
+ compatible = "lge,p880", "nvidia,tegra30";
+
+ aliases {
+ mmc1 = &sdmmc3; /* uSD slot */
+ };
+
+ sdmmc3: sdhci@78000400 {
+ status = "okay";
+ bus-width = <4>;
+
+ cd-gpios = <&gpio TEGRA_GPIO(W, 5) GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&vdd_usd>;
+ vqmmc-supply = <&vdd_1v8_vio>;
+ };
+
+ gpio-keys {
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&gpio TEGRA_GPIO(O, 7) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_UP>;
+ };
+ };
+
+ panel: panel {
+ compatible = "jdi,dx12d100vm0eaa";
+
+ enable-gpios = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+
+ backlight = <&backlight>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-lg-x3.dtsi"
+
+/ {
+ model = "LG Optimus Vu";
+ compatible = "lge,p895", "nvidia,tegra30";
+
+ gpio-keys {
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_UP>;
+ };
+ };
+
+ panel: panel {
+ compatible = "hitachi,tx13d100vm0eaa";
+
+ reset-gpios = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+
+ renesas,gamma = <3>;
+ renesas,inversion;
+ renesas,contrast;
+
+ vcc-supply = <&vcc_3v0_lcd>;
+ iovcc-supply = <&iovcc_1v8_lcd>;
+
+ backlight = <&backlight>;
+ };
+
+ vcc_3v0_lcd: regulator-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v0_lcd";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ iovcc_1v8_lcd: regulator-lcdvio {
+ compatible = "regulator-fixed";
+ regulator-name = "iovcc_1v8_lcd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/input.h>
+
+#include "tegra30.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uartd;
+ };
+
+ aliases {
+ i2c0 = &pwr_i2c;
+ i2c1 = &gen2_i2c;
+
+ mmc0 = &sdmmc4; /* eMMC */
+
+ rtc0 = &pmic;
+ rtc1 = "/rtc@7000e000";
+
+ spi0 = &dsi_spi;
+
+ usb0 = µ_usb;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+
+ nvidia,panel = <&bridge>;
+ };
+ };
+ };
+
+ uartd: serial@70006300 {
+ status = "okay";
+ };
+
+ gen2_i2c: i2c@7000c400 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ backlight: lm3533@36 {
+ compatible = "ti,lm3533";
+ reg = <0x36>;
+
+ enable-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_HIGH>;
+ default-brightness-level = <128>;
+ };
+
+ muic@44 {
+ compatible = "maxim,max14526-muic";
+ reg = <0x44>;
+
+ maxim,ap-usb;
+
+ usif-gpios = <&gpio TEGRA_GPIO(Y, 3) GPIO_ACTIVE_HIGH>;
+ dp2t-gpios = <&gpio TEGRA_GPIO(CC, 2) GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ pwr_i2c: i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pmic: max77663@1c {
+ compatible = "maxim,max77663";
+ reg = <0x1c>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ system-power-controller;
+
+ regulators {
+ vdd_1v8_vio: sd2 {
+ regulator-name = "vdd_1v8_gen";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_usd: ldo3 {
+ regulator-name = "vdd_sdmmc3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcore_emmc: ldo5 {
+ regulator-name = "vdd_ddr_rx";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+
+ dsi_spi: spi@7000dc00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+
+ bridge: bridge-spi@2 {
+ compatible = "solomon,ssd2825";
+ reg = <2>;
+
+ spi-cpol;
+ spi-cpha;
+
+ spi-max-frequency = <1000000>;
+
+ power-gpios = <&gpio TEGRA_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio TEGRA_GPIO(O, 2) GPIO_ACTIVE_HIGH>;
+
+ clocks = <&ssd2825_refclk>;
+ clock-names = "tx_clk";
+
+ panel = <&panel>;
+ };
+ };
+
+ sdmmc4: sdhci@78000600 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+
+ vmmc-supply = <&vcore_emmc>;
+ vqmmc-supply = <&vdd_1v8_vio>;
+ };
+
+ micro_usb: usb@7d000000 {
+ status = "okay";
+ dr_mode = "otg";
+ };
+
+ /* PMIC has a built-in 32KHz oscillator which is used by PMC */
+ clk32k_in: clock-32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "pmic-oscillator";
+ };
+
+ ssd2825_refclk: clock-ssd2825 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "ssd2825-refclk";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ENTER>;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&gpio TEGRA_GPIO(O, 4) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_DOWN>;
+ };
+ };
+};
u32 security_mode; /* 0x1A0: FUSE_SECURITY_MODE */
};
+/**
+ * Calculate SoC UID
+ *
+ * Return: uid if ok, 0 on error
+ */
+unsigned long long tegra_chip_uid(void);
+
#endif /* ifndef _FUSE_H_ */
obj-$(CONFIG_DISPLAY_CPUINFO) += sys_info.o
obj-y += pmc.o
+ifndef CONFIG_TEGRA186
+obj-y += fuse.o
+endif
+
obj-$(CONFIG_TEGRA20) += tegra20/
obj-$(CONFIG_TEGRA30) += tegra30/
obj-$(CONFIG_TEGRA114) += tegra114/
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2012-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2022
+ * Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#include <common.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#include <asm/arch/tegra.h>
+#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/clock.h>
+#include <asm/arch-tegra/fuse.h>
+
+#include "cpu.h"
+
+#define FUSE_UID_LOW 0x108
+#define FUSE_UID_HIGH 0x10c
+
+#define FUSE_VENDOR_CODE 0x200
+#define FUSE_FAB_CODE 0x204
+#define FUSE_LOT_CODE_0 0x208
+#define FUSE_LOT_CODE_1 0x20c
+#define FUSE_WAFER_ID 0x210
+#define FUSE_X_COORDINATE 0x214
+#define FUSE_Y_COORDINATE 0x218
+
+#define FUSE_VENDOR_CODE_MASK 0xf
+#define FUSE_FAB_CODE_MASK 0x3f
+#define FUSE_WAFER_ID_MASK 0x3f
+#define FUSE_X_COORDINATE_MASK 0x1ff
+#define FUSE_Y_COORDINATE_MASK 0x1ff
+
+static u32 tegra_fuse_readl(unsigned long offset)
+{
+ return readl(NV_PA_FUSE_BASE + offset);
+}
+
+static void tegra_fuse_init(void)
+{
+ u32 reg;
+
+ /*
+ * Performed by downstream and is not
+ * documented by TRM. Whithout setting
+ * this bit fuse region will not work.
+ */
+ reg = readl_relaxed(NV_PA_CLK_RST_BASE + 0x48);
+ reg |= BIT(28);
+ writel(reg, NV_PA_CLK_RST_BASE + 0x48);
+
+ clock_enable(PERIPH_ID_FUSE);
+ udelay(2);
+ reset_set_enable(PERIPH_ID_FUSE, 0);
+}
+
+unsigned long long tegra_chip_uid(void)
+{
+ u64 uid = 0ull;
+ u32 reg;
+ u32 cid;
+ u32 vendor;
+ u32 fab;
+ u32 lot;
+ u32 wafer;
+ u32 x;
+ u32 y;
+ u32 i;
+
+ tegra_fuse_init();
+
+ /* This used to be so much easier in prior chips. Unfortunately, there
+ is no one-stop shopping for the unique id anymore. It must be
+ constructed from various bits of information burned into the fuses
+ during the manufacturing process. The 64-bit unique id is formed
+ by concatenating several bit fields. The notation used for the
+ various fields is <fieldname:size_in_bits> with the UID composed
+ thusly:
+ <CID:4><VENDOR:4><FAB:6><LOT:26><WAFER:6><X:9><Y:9>
+ Where:
+ Field Bits Position Data
+ ------- ---- -------- ----------------------------------------
+ CID 4 60 Chip id
+ VENDOR 4 56 Vendor code
+ FAB 6 50 FAB code
+ LOT 26 24 Lot code (5-digit base-36-coded-decimal,
+ re-encoded to 26 bits binary)
+ WAFER 6 18 Wafer id
+ X 9 9 Wafer X-coordinate
+ Y 9 0 Wafer Y-coordinate
+ ------- ----
+ Total 64
+ */
+
+ switch (tegra_get_chip()) {
+ case CHIPID_TEGRA20:
+ /* T20 has simple calculation */
+ return ((unsigned long long)tegra_fuse_readl(FUSE_UID_HIGH) << 32ull) |
+ (unsigned long long)tegra_fuse_readl(FUSE_UID_LOW);
+ case CHIPID_TEGRA30:
+ /* T30 chip id is 0 */
+ cid = 0;
+ break;
+ case CHIPID_TEGRA114:
+ /* T11x chip id is 1 */
+ cid = 1;
+ break;
+ case CHIPID_TEGRA124:
+ /* T12x chip id is 3 */
+ cid = 3;
+ break;
+ case CHIPID_TEGRA210:
+ /* T210 chip id is 5 */
+ cid = 5;
+ default:
+ return 0;
+ }
+
+ vendor = tegra_fuse_readl(FUSE_VENDOR_CODE) & FUSE_VENDOR_CODE_MASK;
+ fab = tegra_fuse_readl(FUSE_FAB_CODE) & FUSE_FAB_CODE_MASK;
+
+ /* Lot code must be re-encoded from a 5 digit base-36 'BCD' number
+ to a binary number. */
+ lot = 0;
+ reg = tegra_fuse_readl(FUSE_LOT_CODE_0) << 2;
+
+ for (i = 0; i < 5; ++i) {
+ u32 digit = (reg & 0xFC000000) >> 26;
+ lot *= 36;
+ lot += digit;
+ reg <<= 6;
+ }
+
+ wafer = tegra_fuse_readl(FUSE_WAFER_ID) & FUSE_WAFER_ID_MASK;
+ x = tegra_fuse_readl(FUSE_X_COORDINATE) & FUSE_X_COORDINATE_MASK;
+ y = tegra_fuse_readl(FUSE_Y_COORDINATE) & FUSE_Y_COORDINATE_MASK;
+
+ uid = ((unsigned long long)cid << 60ull)
+ | ((unsigned long long)vendor << 56ull)
+ | ((unsigned long long)fab << 50ull)
+ | ((unsigned long long)lot << 24ull)
+ | ((unsigned long long)wafer << 18ull)
+ | ((unsigned long long)x << 9ull)
+ | ((unsigned long long)y << 0ull);
+
+ return uid;
+}
bool "Toradex Colibri T30 board"
select BOARD_LATE_INIT
+config TARGET_ENDEAVORU
+ bool "HTC Endeavoru T30 board"
+ select BOARD_LATE_INIT
+
+config TARGET_GROUPER
+ bool "Asus and Google Grouper board"
+ select BOARD_LATE_INIT
+
config TARGET_TEC_NG
bool "Avionic Design TEC-NG board"
select BOARD_LATE_INIT
+config TARGET_TRANSFORMER_T30
+ bool "Asus Tegra30 Transformer board"
+ select BOARD_LATE_INIT
+
+config TARGET_X3_T30
+ bool "LG X3 Tegra30 board"
+ select BOARD_LATE_INIT
+
endchoice
config SYS_SOC
source "board/nvidia/beaver/Kconfig"
source "board/nvidia/cardhu/Kconfig"
source "board/toradex/colibri_t30/Kconfig"
+source "board/htc/endeavoru/Kconfig"
+source "board/asus/grouper/Kconfig"
source "board/avionic-design/tec-ng/Kconfig"
+source "board/asus/transformer-t30/Kconfig"
+source "board/lg/x3-t30/Kconfig"
endif
--- /dev/null
+if TARGET_GROUPER
+
+config SYS_BOARD
+ default "grouper"
+
+config SYS_VENDOR
+ default "asus"
+
+config SYS_CONFIG_NAME
+ default "grouper"
+
+config GROUPER_TPS65911
+ bool "Enable support TI TPS65911 PMIC"
+ select CMD_POWEROFF
+ default n
+
+config GROUPER_MAX77663
+ bool "Enable support MAXIM MAX77663 PMIC"
+ select CMD_POWEROFF
+ default n
+
+endif
--- /dev/null
+GROUPER BOARD
+M: Svyatoslav Ryhel <clamor95@gmail.com>
+S: Maintained
+F: board/asus/grouper/
+F: configs/grouper_E1565.config
+F: configs/grouper_PM269.config
+F: configs/tilapia.config
+F: configs/grouper_common_defconfig
+F: doc/board/asus/grouper_common.rst
+F: include/configs/grouper.h
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2010-2012
+# NVIDIA Corporation <www.nvidia.com>
+#
+# (C) Copyright 2021
+# Svyatoslav Ryhel <clamor95@gmail.com>
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_GROUPER_MAX77663) += grouper-spl-max.o
+obj-$(CONFIG_GROUPER_TPS65911) += grouper-spl-ti.o
+endif
+
+obj-y += grouper.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * T30 Grouper MAX SPL stage configuration
+ *
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2022
+ * Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#include <common.h>
+#include <asm/arch-tegra/tegra_i2c.h>
+#include <linux/delay.h>
+
+#define MAX77663_I2C_ADDR (0x3C << 1)
+
+#define MAX77663_REG_SD0 0x16
+#define MAX77663_REG_SD0_DATA (0x2100 | MAX77663_REG_SD0)
+#define MAX77663_REG_SD1 0x17
+#define MAX77663_REG_SD1_DATA (0x3000 | MAX77663_REG_SD1)
+#define MAX77663_REG_LDO4 0x2B
+#define MAX77663_REG_LDO4_DATA (0xE000 | MAX77663_REG_LDO4)
+
+#define MAX77663_REG_GPIO4 0x3A
+#define MAX77663_REG_GPIO4_DATA (0x0100 | MAX77663_REG_GPIO4)
+
+void pmic_enable_cpu_vdd(void)
+{
+ /* Set VDD_CORE to 1.200V. */
+ tegra_i2c_ll_write(MAX77663_I2C_ADDR, MAX77663_REG_SD1_DATA);
+
+ udelay(1000);
+
+ /* Bring up VDD_CPU to 1.0125V. */
+ tegra_i2c_ll_write(MAX77663_I2C_ADDR, MAX77663_REG_SD0_DATA);
+ udelay(1000);
+
+ /* Bring up VDD_RTC to 1.200V. */
+ tegra_i2c_ll_write(MAX77663_I2C_ADDR, MAX77663_REG_LDO4_DATA);
+ udelay(10 * 1000);
+
+ /* Set 32k-out gpio state */
+ tegra_i2c_ll_write(MAX77663_I2C_ADDR, MAX77663_REG_GPIO4_DATA);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * T30 Grouper TI SPL stage configuration
+ *
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2022
+ * Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#include <common.h>
+#include <asm/arch-tegra/tegra_i2c.h>
+#include <linux/delay.h>
+
+#define TPS65911_I2C_ADDR (0x2D << 1)
+#define TPS65911_VDDCTRL_OP_REG 0x28
+#define TPS65911_VDDCTRL_SR_REG 0x27
+#define TPS65911_VDDCTRL_OP_DATA (0x2400 | TPS65911_VDDCTRL_OP_REG)
+#define TPS65911_VDDCTRL_SR_DATA (0x0100 | TPS65911_VDDCTRL_SR_REG)
+
+#define TPS62361B_I2C_ADDR (0x60 << 1)
+#define TPS62361B_SET3_REG 0x03
+#define TPS62361B_SET3_DATA (0x4600 | TPS62361B_SET3_REG)
+
+void pmic_enable_cpu_vdd(void)
+{
+ /* Set VDD_CORE to 1.200V. */
+ tegra_i2c_ll_write(TPS62361B_I2C_ADDR, TPS62361B_SET3_DATA);
+
+ udelay(1000);
+
+ /*
+ * Bring up CPU VDD via the TPS65911x PMIC on the DVC I2C bus.
+ * First set VDD to 1.0125V, then enable the VDD regulator.
+ */
+ tegra_i2c_ll_write(TPS65911_I2C_ADDR, TPS65911_VDDCTRL_OP_DATA);
+ udelay(1000);
+ tegra_i2c_ll_write(TPS65911_I2C_ADDR, TPS65911_VDDCTRL_SR_DATA);
+ udelay(10 * 1000);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2021
+ * Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <env.h>
+#include <fdt_support.h>
+#include <i2c.h>
+#include <log.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch-tegra/fuse.h>
+#include <asm/gpio.h>
+#include <linux/delay.h>
+#include "pinmux-config-grouper.h"
+
+#define TPS65911_I2C_ADDRESS 0x2D
+
+#define TPS65911_REG_LDO1 0x30
+#define TPS65911_REG_DEVCTRL 0x3F
+#define DEVCTRL_PWR_OFF_MASK BIT(7)
+#define DEVCTRL_DEV_ON_MASK BIT(2)
+#define DEVCTRL_DEV_OFF_MASK BIT(0)
+
+#define MAX77663_I2C_ADDRESS 0x3C
+
+#define MAX77663_REG_SD2 0x18
+#define MAX77663_REG_LDO3 0x29
+#define MAX77663_REG_ONOFF_CFG1 0x41
+#define ONOFF_PWR_OFF BIT(1)
+
+#ifdef CONFIG_CMD_POWEROFF
+#ifdef CONFIG_GROUPER_TPS65911
+int do_poweroff(struct cmd_tbl *cmdtp,
+ int flag, int argc, char *const argv[])
+{
+ struct udevice *dev;
+ uchar data_buffer[1];
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(0, TPS65911_I2C_ADDRESS, 1, &dev);
+ if (ret) {
+ log_debug("cannot find PMIC I2C chip\n");
+ return 0;
+ }
+
+ ret = dm_i2c_read(dev, TPS65911_REG_DEVCTRL, data_buffer, 1);
+ if (ret)
+ return ret;
+
+ data_buffer[0] |= DEVCTRL_PWR_OFF_MASK;
+
+ ret = dm_i2c_write(dev, TPS65911_REG_DEVCTRL, data_buffer, 1);
+ if (ret)
+ return ret;
+
+ data_buffer[0] |= DEVCTRL_DEV_OFF_MASK;
+ data_buffer[0] &= ~DEVCTRL_DEV_ON_MASK;
+
+ ret = dm_i2c_write(dev, TPS65911_REG_DEVCTRL, data_buffer, 1);
+ if (ret)
+ return ret;
+
+ // wait some time and then print error
+ mdelay(5000);
+
+ printf("Failed to power off!!!\n");
+ return 1;
+}
+#endif /* CONFIG_GROUPER_TPS65911 */
+
+#ifdef CONFIG_GROUPER_MAX77663
+int do_poweroff(struct cmd_tbl *cmdtp,
+ int flag, int argc, char *const argv[])
+{
+ struct udevice *dev;
+ uchar data_buffer[1];
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(0, MAX77663_I2C_ADDRESS, 1, &dev);
+ if (ret) {
+ log_debug("cannot find PMIC I2C chip\n");
+ return 0;
+ }
+
+ ret = dm_i2c_read(dev, MAX77663_REG_ONOFF_CFG1, data_buffer, 1);
+ if (ret)
+ return ret;
+
+ data_buffer[0] |= ONOFF_PWR_OFF;
+
+ ret = dm_i2c_write(dev, MAX77663_REG_ONOFF_CFG1, data_buffer, 1);
+ if (ret)
+ return ret;
+
+ // wait some time and then print error
+ mdelay(5000);
+
+ printf("Failed to power off!!!\n");
+ return 1;
+}
+#endif /* CONFIG_GROUPER_MAX77663 */
+#endif /* CONFIG_CMD_POWEROFF */
+
+/*
+ * Routine: pinmux_init
+ * Description: Do individual peripheral pinmux configs
+ */
+void pinmux_init(void)
+{
+ pinmux_config_pingrp_table(grouper_pinmux_common,
+ ARRAY_SIZE(grouper_pinmux_common));
+
+ pinmux_config_drvgrp_table(grouper_padctrl,
+ ARRAY_SIZE(grouper_padctrl));
+}
+
+#ifdef CONFIG_MMC_SDHCI_TEGRA
+static void __maybe_unused tps65911_voltage_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(0, TPS65911_I2C_ADDRESS, 1, &dev);
+ if (ret) {
+ log_debug("cannot find PMIC I2C chip\n");
+ return;
+ }
+
+ /* TPS659110: LDO1_REG = 3.3v, ACTIVE to SDMMC4 */
+ ret = dm_i2c_reg_write(dev, TPS65911_REG_LDO1, 0xC9);
+ if (ret)
+ log_debug("vcore_emmc set failed: %d\n", ret);
+}
+
+static void __maybe_unused max77663_voltage_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(0, MAX77663_I2C_ADDRESS, 1, &dev);
+ if (ret) {
+ log_debug("cannot find PMIC I2C chip\n");
+ return;
+ }
+
+ /* 0x60 for 1.8v, bit7:0 = voltage */
+ ret = dm_i2c_reg_write(dev, MAX77663_REG_SD2, 0x60);
+ if (ret)
+ log_debug("vdd_1v8_vio set failed: %d\n", ret);
+
+ /* 0xEC for 3.00v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
+ ret = dm_i2c_reg_write(dev, MAX77663_REG_LDO3, 0xEC);
+ if (ret)
+ log_debug("vcore_emmc set failed: %d\n", ret);
+}
+
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the MMC muxes, power rails, etc.
+ */
+void pin_mux_mmc(void)
+{
+#ifdef CONFIG_GROUPER_MAX77663
+ /* Bring up eMMC power on MAX PMIC */
+ max77663_voltage_init();
+#endif
+
+#ifdef CONFIG_GROUPER_TPS65911
+ /* Bring up eMMC power on TI PMIC */
+ tps65911_voltage_init();
+#endif
+}
+#endif /* MMC */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+ /* Remove TrustZone nodes */
+ fdt_del_node_and_alias(blob, "/firmware");
+ fdt_del_node_and_alias(blob, "/reserved-memory/trustzone@bfe00000");
+
+ return 0;
+}
+#endif
+
+void nvidia_board_late_init(void)
+{
+ char serialno_str[17];
+
+ /* Set chip id as serialno */
+ sprintf(serialno_str, "%016llx", tegra_chip_uid());
+ env_set("serial#", serialno_str);
+ env_set("platform", "Tegra 3 T30");
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ */
+
+#ifndef _PINMUX_CONFIG_GROUPER_H_
+#define _PINMUX_CONFIG_GROUPER_H_
+
+#define DEFAULT_PINMUX(_pingrp, _mux, _pull, _tri, _io) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_DEFAULT, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define I2C_PINMUX(_pingrp, _mux, _pull, _tri, _io, _lock, _od) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_##_od, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define LV_PINMUX(_pingrp, _mux, _pull, _tri, _io, _lock, _ioreset) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_##_ioreset \
+ }
+
+#define DEFAULT_PADCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+ { \
+ .drvgrp = PMUX_DRVGRP_##_drvgrp, \
+ .slwf = _slwf, \
+ .slwr = _slwr, \
+ .drvup = _drvup, \
+ .drvdn = _drvdn, \
+ .lpmd = PMUX_LPMD_##_lpmd, \
+ .schmt = PMUX_SCHMT_##_schmt, \
+ .hsm = PMUX_HSM_##_hsm, \
+ }
+
+static struct pmux_pingrp_config grouper_pinmux_common[] = {
+ /* SDMMC1 pinmux */
+ DEFAULT_PINMUX(SDMMC1_CLK_PZ0, SDMMC1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_CMD_PZ1, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT3_PY4, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT2_PY5, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT1_PY6, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT0_PY7, SDMMC1, UP, NORMAL, INPUT),
+
+ /* SDMMC3 pinmux */
+ DEFAULT_PINMUX(SDMMC3_CLK_PA6, SDMMC3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CMD_PA7, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT0_PB7, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT1_PB6, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT2_PB5, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT3_PB4, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT4_PD1, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT5_PD0, SDMMC3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT6_PD3, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT7_PD4, SDMMC3, UP, NORMAL, INPUT),
+
+ /* SDMMC4 pinmux */
+ LV_PINMUX(SDMMC4_CLK_PCC4, SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_CMD_PT7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT0_PAA0, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT1_PAA1, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT2_PAA2, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT3_PAA3, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT4_PAA4, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT5_PAA5, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT6_PAA6, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT7_PAA7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_RST_N_PCC3, RSVD2, DOWN, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* I2C pinmux */
+ I2C_PINMUX(GEN1_I2C_SCL_PC4, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN1_I2C_SDA_PC5, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN2_I2C_SCL_PT5, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN2_I2C_SDA_PT6, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(CAM_I2C_SCL_PBB1, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(CAM_I2C_SDA_PBB2, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(DDC_SCL_PV4, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(DDC_SDA_PV5, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(PWR_I2C_SCL_PZ6, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(PWR_I2C_SDA_PZ7, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* HDMI-CEC pinmux */
+ DEFAULT_PINMUX(HDMI_CEC_PEE3, CEC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(HDMI_INT_PN7, RSVD1, NORMAL, TRISTATE, INPUT),
+
+ /* ULPI pinmux */
+ DEFAULT_PINMUX(ULPI_DATA0_PO1, UARTA, DOWN, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(ULPI_DATA1_PO2, UARTA, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA2_PO3, UARTA, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA3_PO4, ULPI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA4_PO5, UARTA, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA5_PO6, UARTA, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA6_PO7, UARTA, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA7_PO0, UARTA, UP, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(ULPI_CLK_PY0, ULPI, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(ULPI_DIR_PY1, ULPI, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(ULPI_NXT_PY2, RSVD1, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(ULPI_STP_PY3, RSVD1, NORMAL, TRISTATE, OUTPUT),
+
+ /* DAP3 pinmux */
+ DEFAULT_PINMUX(DAP3_FS_PP0, I2S2, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(DAP3_DIN_PP1, I2S2, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_DOUT_PP2, I2S2, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_SCLK_PP3, I2S2, DOWN, TRISTATE, INPUT),
+
+ DEFAULT_PINMUX(PV0, RSVD1, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PV1, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PV2, OWR, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(PV3, RSVD1, NORMAL, TRISTATE, INPUT),
+
+ /* CLK2 pinmux */
+ DEFAULT_PINMUX(CLK2_OUT_PW5, EXTPERIPH2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK2_REQ_PCC5, DAP, NORMAL, NORMAL, INPUT),
+
+ /* LCD pinmux */
+ DEFAULT_PINMUX(LCD_PWR1_PC1, DISPLAYA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(LCD_PWR2_PC6, DISPLAYA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(LCD_SDIN_PZ2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_SDOUT_PN5, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_WR_N_PZ3, DISPLAYA, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_CS0_N_PN4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_DC0_PN6, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_SCK_PZ4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_PWR0_PB2, DISPLAYA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(LCD_PCLK_PB3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_DE_PJ1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_HSYNC_PJ3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_VSYNC_PJ4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D0_PE0, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D1_PE1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D2_PE2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D3_PE3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D4_PE4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D5_PE5, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D6_PE6, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D7_PE7, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D8_PF0, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D9_PF1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D10_PF2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D11_PF3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D12_PF4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D13_PF5, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D14_PF6, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D15_PF7, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D16_PM0, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D17_PM1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D18_PM2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D19_PM3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D20_PM4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D21_PM5, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D22_PM6, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D23_PM7, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_CS1_N_PW0, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_M1_PW1, DISPLAYA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(LCD_DC1_PD2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CRT_HSYNC_PV6, CRT, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(CRT_VSYNC_PV7, CRT, NORMAL, NORMAL, OUTPUT),
+
+ /* VI-group pinmux */
+ LV_PINMUX(VI_D0_PT4, RSVD1, DOWN, TRISTATE, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D1_PD5, SDMMC2, DOWN, TRISTATE, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D2_PL0, SDMMC2, DOWN, TRISTATE, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D3_PL1, SDMMC2, DOWN, TRISTATE, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D4_PL2, VI, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D5_PL3, SDMMC2, DOWN, TRISTATE, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D6_PL4, VI, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D7_PL5, SDMMC2, DOWN, TRISTATE, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D8_PL6, SDMMC2, DOWN, TRISTATE, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D9_PL7, SDMMC2, DOWN, TRISTATE, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D10_PT2, RSVD1, DOWN, TRISTATE, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D11_PT3, RSVD1, DOWN, TRISTATE, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_PCLK_PT0, SDMMC2, UP, TRISTATE, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_MCLK_PT1, RSVD1, DOWN, TRISTATE, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_HSYNC_PD7, RSVD1, DOWN, TRISTATE, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_VSYNC_PD6, RSVD1, DOWN, TRISTATE, INPUT, DISABLE, DISABLE),
+
+ /* UART-B pinmux */
+ DEFAULT_PINMUX(UART2_RXD_PC3, UARTB, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART2_TXD_PC2, UARTB, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART2_RTS_N_PJ6, UARTB, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART2_CTS_N_PJ5, UARTB, NORMAL, NORMAL, INPUT),
+
+ /* UART-C pinmux */
+ DEFAULT_PINMUX(UART3_TXD_PW6, UARTC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART3_RXD_PW7, UARTC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_CTS_N_PA1, UARTC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_RTS_N_PC0, UARTC, NORMAL, NORMAL, OUTPUT),
+
+ /* U-gpio group pinmux */
+ DEFAULT_PINMUX(PU0, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU1, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PU2, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU3, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU4, PWM1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PU5, PWM2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU6, RSVD4, NORMAL, NORMAL, INPUT),
+
+ /* DAP4 pinmux */
+ DEFAULT_PINMUX(DAP4_FS_PP4, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DIN_PP5, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DOUT_PP6, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_SCLK_PP7, I2S3, NORMAL, NORMAL, INPUT),
+
+ /* CLK3 pinmux */
+ DEFAULT_PINMUX(CLK3_OUT_PEE0, EXTPERIPH3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(CLK3_REQ_PEE1, DEV3, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(CAM_MCLK_PCC0, VI_ALT3, DOWN, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(PCC1, RSVD2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB0, RSVD2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB3, VGP3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB4, VGP4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB5, VGP5, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB6, VGP6, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB7, I2S4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PCC2, I2S4, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(JTAG_RTCK_PU7, RTCK, UP, NORMAL, INPUT),
+
+ /* KBC keys */
+ DEFAULT_PINMUX(KB_ROW0_PR0, RSVD4, UP, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW1_PR1, KBC, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW2_PR2, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW3_PR3, KBC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW4_PR4, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW5_PR5, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW6_PR6, KBC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW7_PR7, KBC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW8_PS0, KBC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW9_PS1, KBC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW10_PS2, KBC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW11_PS3, KBC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW12_PS4, KBC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW13_PS5, KBC, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW14_PS6, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW15_PS7, KBC, NORMAL, NORMAL, OUTPUT),
+
+ DEFAULT_PINMUX(KB_COL0_PQ0, KBC, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(KB_COL1_PQ1, KBC, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(KB_COL2_PQ2, RSVD4, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_COL3_PQ3, RSVD4, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_COL4_PQ4, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_COL5_PQ5, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_COL6_PQ6, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL7_PQ7, KBC, NORMAL, TRISTATE, INPUT),
+
+ /* CLK */
+ DEFAULT_PINMUX(CLK_32K_OUT_PA0, BLINK, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SYS_CLK_REQ_PZ5, SYSCLK, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(OWR, OWR, NORMAL, NORMAL, INPUT),
+
+ /* DAP1 pinmux */
+ DEFAULT_PINMUX(DAP1_FS_PN0, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_DIN_PN1, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_DOUT_PN2, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_SCLK_PN3, I2S0, NORMAL, NORMAL, INPUT),
+
+ /* CLK1 pinmux */
+ DEFAULT_PINMUX(CLK1_REQ_PEE2, DAP, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(CLK1_OUT_PW4, EXTPERIPH1, NORMAL, NORMAL, INPUT),
+
+ /* SPDIF pinmux */
+ DEFAULT_PINMUX(SPDIF_IN_PK6, SPDIF, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPDIF_OUT_PK5, SPDIF, NORMAL, NORMAL, OUTPUT),
+
+ /* DAP2 pinmux */
+ DEFAULT_PINMUX(DAP2_FS_PA2, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DIN_PA4, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DOUT_PA5, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_SCLK_PA3, I2S1, NORMAL, NORMAL, INPUT),
+
+ /* SPI pinmux */
+ DEFAULT_PINMUX(SPI1_MOSI_PX4, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_SCK_PX5, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_CS0_N_PX6, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_MISO_PX7, SPI1, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(SPI2_MOSI_PX0, SPI2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI2_MISO_PX1, SPI2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI2_SCK_PX2, SPI2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI2_CS1_N_PW2, SPI2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI2_CS2_N_PW3, SPI2, NORMAL, NORMAL, INPUT),
+
+ /* PEX pinmux */
+ DEFAULT_PINMUX(PEX_L0_PRSNT_N_PDD0, PCIE, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PEX_L0_RST_N_PDD1, PCIE, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(PEX_L0_CLKREQ_N_PDD2, PCIE, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PEX_WAKE_N_PDD3, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L1_PRSNT_N_PDD4, PCIE, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PEX_L1_RST_N_PDD5, PCIE, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(PEX_L1_CLKREQ_N_PDD6, PCIE, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PEX_L2_PRSNT_N_PDD7, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L2_RST_N_PCC6, PCIE, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PEX_L2_CLKREQ_N_PCC7, PCIE, NORMAL, NORMAL, OUTPUT),
+
+ /* GMI pinmux */
+ DEFAULT_PINMUX(GMI_WP_N_PC7, RSVD1, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_IORDY_PI5, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_WAIT_PI7, RSVD1, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_ADV_N_PK0, RSVD1, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CLK_PK1, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS0_N_PJ0, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_CS1_N_PJ2, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_CS2_N_PK3, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_CS3_N_PK4, RSVD1, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS4_N_PK2, RSVD1, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS6_N_PI3, GMI, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS7_N_PI6, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD0_PG0, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD1_PG1, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD2_PG2, RSVD1, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD3_PG3, RSVD1, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD4_PG4, NAND, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD5_PG5, NAND, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD6_PG6, RSVD1, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD7_PG7, RSVD1, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD8_PH0, PWM0, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD9_PH1, RSVD4, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD10_PH2, PWM2, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD11_PH3, PWM3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD12_PH4, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD13_PH5, RSVD1, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD14_PH6, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD15_PH7, RSVD1, UP, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_A16_PJ7, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_A17_PB0, UARTD, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A18_PB1, UARTD, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A19_PK7, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_WR_N_PI0, RSVD1, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_OE_N_PI1, RSVD1, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_DQS_PI2, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_RST_N_PI4, NAND, UP, NORMAL, OUTPUT),
+};
+
+static struct pmux_drvgrp_config grouper_padctrl[] = {
+ /* (_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) */
+ DEFAULT_PADCFG(SDIO1, SDIOCFG_DRVUP_SLWF, SDIOCFG_DRVDN_SLWR, \
+ SDIOCFG_DRVUP, SDIOCFG_DRVDN, NONE, DISABLE, DISABLE),
+};
+#endif /* _PINMUX_CONFIG_GROUPER_H_ */
--- /dev/null
+if TARGET_TRANSFORMER_T30
+
+config SYS_BOARD
+ default "transformer-t30"
+
+config SYS_VENDOR
+ default "asus"
+
+config SYS_CONFIG_NAME
+ default "transformer-t30"
+
+config TRANSFORMER_SPI_BOOT
+ bool "Enable support for SPI based flash"
+ select TEGRA20_SLINK
+ select DM_SPI_FLASH
+ select SPI_FLASH_WINBOND
+ default n
+ help
+ Tegra 3 based Transformers with Windows RT have core
+ boot sequence (BCT and EBT) on separate SPI FLASH
+ memory with 4MB size.
+
+endif
--- /dev/null
+TRANSFORMER BOARD
+M: Svyatoslav Ryhel <clamor95@gmail.com>
+S: Maintained
+F: board/asus/transformer-t30/
+F: configs/p1801-t.config
+F: configs/tf201.config
+F: configs/tf300t.config
+F: configs/tf300tg.config
+F: configs/tf300tl.config
+F: configs/tf600t.config
+F: configs/tf700t.config
+F: configs/transformer_t30_defconfig
+F: doc/board/asus/transformer_t30.rst
+F: include/configs/transformer-common.h
+F: include/configs/transformer-t30.h
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2010-2012
+# NVIDIA Corporation <www.nvidia.com>
+#
+# (C) Copyright 2021
+# Svyatoslav Ryhel <clamor95@gmail.com>
+
+obj-$(CONFIG_SPL_BUILD) += transformer-t30-spl.o
+
+obj-y += transformer-t30.o
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Copyright (c) 2021, Svyatoslav Ryhel.
+ */
+
+#ifndef _PINMUX_CONFIG_TRANSFORMER_H_
+#define _PINMUX_CONFIG_TRANSFORMER_H_
+
+#define DEFAULT_PINMUX(_pingrp, _mux, _pull, _tri, _io) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_DEFAULT, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define I2C_PINMUX(_pingrp, _mux, _pull, _tri, _io, _lock, _od) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_##_od, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define LV_PINMUX(_pingrp, _mux, _pull, _tri, _io, _lock, _ioreset) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_##_ioreset \
+ }
+
+#define DEFAULT_PADCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+ { \
+ .drvgrp = PMUX_DRVGRP_##_drvgrp, \
+ .slwf = _slwf, \
+ .slwr = _slwr, \
+ .drvup = _drvup, \
+ .drvdn = _drvdn, \
+ .lpmd = PMUX_LPMD_##_lpmd, \
+ .schmt = PMUX_SCHMT_##_schmt, \
+ .hsm = PMUX_HSM_##_hsm, \
+ }
+
+static struct pmux_pingrp_config transformer_pinmux_common[] = {
+ /* SDMMC1 pinmux */
+ DEFAULT_PINMUX(SDMMC1_CLK_PZ0, SDMMC1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_CMD_PZ1, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT3_PY4, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT2_PY5, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT1_PY6, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT0_PY7, SDMMC1, UP, NORMAL, INPUT),
+
+ /* SDMMC3 pinmux */
+ DEFAULT_PINMUX(SDMMC3_CLK_PA6, SDMMC3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CMD_PA7, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT0_PB7, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT1_PB6, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT2_PB5, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT3_PB4, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT4_PD1, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT5_PD0, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT6_PD3, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT7_PD4, SDMMC3, UP, NORMAL, INPUT),
+
+ /* SDMMC4 pinmux */
+ LV_PINMUX(SDMMC4_CLK_PCC4, SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_CMD_PT7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT0_PAA0, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT1_PAA1, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT2_PAA2, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT3_PAA3, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT4_PAA4, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT5_PAA5, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT6_PAA6, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT7_PAA7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_RST_N_PCC3, RSVD1, DOWN, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* I2C pinmux */
+ I2C_PINMUX(GEN1_I2C_SCL_PC4, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN1_I2C_SDA_PC5, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN2_I2C_SCL_PT5, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN2_I2C_SDA_PT6, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(CAM_I2C_SCL_PBB1, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(CAM_I2C_SDA_PBB2, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(DDC_SCL_PV4, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(DDC_SDA_PV5, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(PWR_I2C_SCL_PZ6, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(PWR_I2C_SDA_PZ7, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* HDMI-CEC pinmux */
+ DEFAULT_PINMUX(HDMI_CEC_PEE3, CEC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(HDMI_INT_PN7, RSVD1, NORMAL, TRISTATE, INPUT),
+
+ /* ULPI pinmux */
+ DEFAULT_PINMUX(ULPI_DATA0_PO1, UARTA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_DATA1_PO2, UARTA, DOWN, TRISTATE, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA2_PO3, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA3_PO4, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA4_PO5, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA5_PO6, UARTA, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA6_PO7, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA7_PO0, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_CLK_PY0, UARTD, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(ULPI_DIR_PY1, UARTD, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(ULPI_NXT_PY2, UARTD, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(ULPI_STP_PY3, UARTD, NORMAL, TRISTATE, OUTPUT),
+
+ /* DAP3 pinmux */
+ DEFAULT_PINMUX(DAP3_FS_PP0, I2S2, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP3_DIN_PP1, I2S2, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP3_DOUT_PP2, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_SCLK_PP3, I2S2, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(PV0, RSVD1, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PV2, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PV3, RSVD1, NORMAL, TRISTATE, OUTPUT),
+
+ /* CLK2 pinmux */
+ DEFAULT_PINMUX(CLK2_OUT_PW5, EXTPERIPH2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK2_REQ_PCC5, DAP, NORMAL, NORMAL, INPUT),
+
+ /* LCD pinmux */
+ DEFAULT_PINMUX(LCD_PWR1_PC1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_PWR2_PC6, DISPLAYA, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(LCD_SDIN_PZ2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_SDOUT_PN5, DISPLAYA, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(LCD_WR_N_PZ3, DISPLAYA, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(LCD_CS0_N_PN4, DISPLAYA, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(LCD_DC0_PN6, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_SCK_PZ4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_PWR0_PB2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_PCLK_PB3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_DE_PJ1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_HSYNC_PJ3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_VSYNC_PJ4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D0_PE0, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D1_PE1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D2_PE2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D3_PE3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D4_PE4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D5_PE5, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D6_PE6, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D7_PE7, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D8_PF0, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D9_PF1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D10_PF2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D11_PF3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D12_PF4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D13_PF5, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D14_PF6, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D15_PF7, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D16_PM0, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D17_PM1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D18_PM2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D19_PM3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D20_PM4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D21_PM5, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D22_PM6, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D23_PM7, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_CS1_N_PW0, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_M1_PW1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_DC1_PD2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CRT_HSYNC_PV6, CRT, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(CRT_VSYNC_PV7, CRT, NORMAL, TRISTATE, OUTPUT),
+
+ /* VI-group pinmux */
+ LV_PINMUX(VI_D0_PT4, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D1_PD5, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D2_PL0, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D3_PL1, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D4_PL2, VI, NORMAL, NORMAL, OUTPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D5_PL3, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D6_PL4, VI, NORMAL, NORMAL, OUTPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D7_PL5, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D8_PL6, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D9_PL7, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D10_PT2, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D11_PT3, RSVD1, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_PCLK_PT0, RSVD1, UP, TRISTATE, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_MCLK_PT1, VI, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_HSYNC_PD7, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_VSYNC_PD6, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* UART-B pinmux */
+ DEFAULT_PINMUX(UART2_RXD_PC3, UARTB, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART2_TXD_PC2, UARTB, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART2_RTS_N_PJ6, UARTB, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART2_CTS_N_PJ5, UARTB, NORMAL, NORMAL, INPUT),
+
+ /* UART-C pinmux */
+ DEFAULT_PINMUX(UART3_TXD_PW6, UARTC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART3_RXD_PW7, UARTC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_CTS_N_PA1, UARTC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_RTS_N_PC0, UARTC, NORMAL, NORMAL, OUTPUT),
+
+ /* U-gpio group pinmux */
+ DEFAULT_PINMUX(PU0, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU1, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PU2, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU3, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PU4, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU5, PWM2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU6, RSVD1, DOWN, NORMAL, INPUT),
+
+ /* DAP4 pinmux */
+ DEFAULT_PINMUX(DAP4_FS_PP4, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DIN_PP5, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DOUT_PP6, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_SCLK_PP7, I2S3, NORMAL, NORMAL, INPUT),
+
+ /* CLK3 pinmux */
+ DEFAULT_PINMUX(CLK3_OUT_PEE0, EXTPERIPH3, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(CLK3_REQ_PEE1, DEV3, NORMAL, TRISTATE, INPUT),
+
+ DEFAULT_PINMUX(CAM_MCLK_PCC0, VI_ALT3, UP, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(PCC1, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PBB0, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB3, VGP3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB4, VGP4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB5, VGP5, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB6, VGP6, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB7, I2S4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PCC2, I2S4, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(JTAG_RTCK_PU7, RTCK, NORMAL, NORMAL, OUTPUT),
+
+ /* KBC keys */
+ DEFAULT_PINMUX(KB_ROW0_PR0, RSVD4, UP, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW1_PR1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW2_PR2, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW3_PR3, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW4_PR4, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW5_PR5, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW6_PR6, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW7_PR7, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW8_PS0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW9_PS1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW10_PS2, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW11_PS3, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW12_PS4, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW13_PS5, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW14_PS6, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW15_PS7, KBC, UP, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(KB_COL0_PQ0, KBC, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(KB_COL1_PQ1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL2_PQ2, RSVD4, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_COL3_PQ3, RSVD4, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_COL4_PQ4, RSVD4, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_COL5_PQ5, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_COL6_PQ6, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL7_PQ7, KBC, NORMAL, TRISTATE, INPUT),
+
+ /* CLK */
+ DEFAULT_PINMUX(CLK_32K_OUT_PA0, BLINK, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SYS_CLK_REQ_PZ5, SYSCLK, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(OWR, OWR, NORMAL, NORMAL, INPUT),
+
+ /* DAP1 pinmux */
+ DEFAULT_PINMUX(DAP1_FS_PN0, I2S0, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP1_DIN_PN1, I2S0, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP1_DOUT_PN2, I2S0, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP1_SCLK_PN3, I2S0, NORMAL, TRISTATE, INPUT),
+
+ /* CLK1 pinmux */
+ DEFAULT_PINMUX(CLK1_REQ_PEE2, DAP, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK1_OUT_PW4, EXTPERIPH1, NORMAL, NORMAL, INPUT),
+
+ /* SPDIF pinmux */
+ DEFAULT_PINMUX(SPDIF_IN_PK6, SPDIF, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SPDIF_OUT_PK5, SPDIF, NORMAL, TRISTATE, OUTPUT),
+
+ /* DAP2 pinmux */
+ DEFAULT_PINMUX(DAP2_FS_PA2, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DIN_PA4, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DOUT_PA5, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_SCLK_PA3, I2S1, NORMAL, NORMAL, INPUT),
+
+ /* SPI pinmux */
+ DEFAULT_PINMUX(SPI1_MOSI_PX4, SPI1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SPI1_SCK_PX5, SPI1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SPI1_CS0_N_PX6, SPI1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SPI1_MISO_PX7, SPI1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SPI2_SCK_PX2, GMI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI2_CS1_N_PW2, SPI2, UP, NORMAL, INPUT),
+
+ /* PEX pinmux */
+ DEFAULT_PINMUX(PEX_L0_PRSNT_N_PDD0, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L0_RST_N_PDD1, PCIE, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PEX_L0_CLKREQ_N_PDD2, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_WAKE_N_PDD3, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L1_PRSNT_N_PDD4, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L1_RST_N_PDD5, PCIE, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PEX_L1_CLKREQ_N_PDD6, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L2_PRSNT_N_PDD7, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L2_RST_N_PCC6, PCIE, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PEX_L2_CLKREQ_N_PCC7, PCIE, NORMAL, NORMAL, INPUT),
+
+ /* GMI pinmux */
+ DEFAULT_PINMUX(GMI_WP_N_PC7, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_IORDY_PI5, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_WAIT_PI7, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_ADV_N_PK0, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CLK_PK1, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS2_N_PK3, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_CS3_N_PK4, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_CS7_N_PI6, NAND, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD0_PG0, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD1_PG1, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD2_PG2, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD3_PG3, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD4_PG4, NAND, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD5_PG5, NAND, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD6_PG6, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD7_PG7, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD8_PH0, PWM0, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD9_PH1, PWM1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD10_PH2, NAND, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD11_PH3, NAND, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD12_PH4, NAND, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD13_PH5, NAND, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD14_PH6, NAND, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD15_PH7, NAND, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_A16_PJ7, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A17_PB0, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A18_PB1, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A19_PK7, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_WR_N_PI0, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_OE_N_PI1, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_DQS_PI2, NAND, NORMAL, TRISTATE, OUTPUT),
+};
+
+static struct pmux_pingrp_config tf700t_mipi_pinmux[] = {
+ DEFAULT_PINMUX(LCD_PWR2_PC6, DISPLAYA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(LCD_DC1_PD2, DISPLAYA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PBB3, VGP3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PBB7, I2S4, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SPI2_MOSI_PX0, SPI2, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW7_PR7, KBC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS4_N_PK2, GMI, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(CAM_MCLK_PCC0, VI_ALT3, UP, TRISTATE, INPUT),
+};
+
+static struct pmux_drvgrp_config transformer_padctrl[] = {
+ /* (_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) */
+ DEFAULT_PADCFG(SDIO1, SDIOCFG_DRVUP_SLWF, SDIOCFG_DRVDN_SLWR, \
+ SDIOCFG_DRVUP, SDIOCFG_DRVDN, NONE, DISABLE, DISABLE),
+};
+#endif /* _PINMUX_CONFIG_TRANSFORMER_H_ */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * T30 Transformers SPL stage configuration
+ *
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2021
+ * Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#include <common.h>
+#include <asm/arch-tegra/tegra_i2c.h>
+#include <linux/delay.h>
+
+#define TPS65911_I2C_ADDR (0x2D << 1)
+#define TPS65911_VDDCTRL_OP_REG 0x28
+#define TPS65911_VDDCTRL_SR_REG 0x27
+#define TPS65911_VDDCTRL_OP_DATA (0x2400 | TPS65911_VDDCTRL_OP_REG)
+#define TPS65911_VDDCTRL_SR_DATA (0x0100 | TPS65911_VDDCTRL_SR_REG)
+
+#define TPS62361B_I2C_ADDR (0x60 << 1)
+#define TPS62361B_SET3_REG 0x03
+#define TPS62361B_SET3_DATA (0x4600 | TPS62361B_SET3_REG)
+
+void pmic_enable_cpu_vdd(void)
+{
+ /* Set VDD_CORE to 1.200V. */
+ tegra_i2c_ll_write(TPS62361B_I2C_ADDR, TPS62361B_SET3_DATA);
+
+ udelay(1000);
+
+ /*
+ * Bring up CPU VDD via the TPS65911x PMIC on the DVC I2C bus.
+ * First set VDD to 1.0125V, then enable the VDD regulator.
+ */
+ tegra_i2c_ll_write(TPS65911_I2C_ADDR, TPS65911_VDDCTRL_OP_DATA);
+ udelay(1000);
+ tegra_i2c_ll_write(TPS65911_I2C_ADDR, TPS65911_VDDCTRL_SR_DATA);
+ udelay(10 * 1000);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2021
+ * Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+/* T30 Transformers derive from Cardhu board */
+
+#include <common.h>
+#include <dm.h>
+#include <env.h>
+#include <fdt_support.h>
+#include <i2c.h>
+#include <log.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch-tegra/fuse.h>
+#include <asm/gpio.h>
+#include <linux/delay.h>
+#include "pinmux-config-transformer.h"
+
+#define TPS65911_I2C_ADDRESS 0x2D
+
+#define TPS65911_VDD1 0x21
+#define TPS65911_VDD1_OP 0x22
+#define TPS65911_LDO1 0x30
+#define TPS65911_LDO2 0x31
+#define TPS65911_LDO3 0x37
+#define TPS65911_LDO5 0x32
+#define TPS65911_LDO6 0x35
+
+#define TPS65911_GPIO0 0x60
+#define TPS65911_GPIO6 0x66
+#define TPS65911_GPIO7 0x67
+#define TPS65911_GPIO8 0x68
+
+#define TPS65911_DEVCTRL 0x3F
+#define DEVCTRL_PWR_OFF_MASK BIT(7)
+#define DEVCTRL_DEV_ON_MASK BIT(2)
+#define DEVCTRL_DEV_OFF_MASK BIT(0)
+
+#ifdef CONFIG_CMD_POWEROFF
+int do_poweroff(struct cmd_tbl *cmdtp, int flag,
+ int argc, char *const argv[])
+{
+ struct udevice *dev;
+ uchar data_buffer[1];
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(0, TPS65911_I2C_ADDRESS, 1, &dev);
+ if (ret) {
+ log_debug("cannot find PMIC I2C chip\n");
+ return 0;
+ }
+
+ ret = dm_i2c_read(dev, TPS65911_DEVCTRL, data_buffer, 1);
+ if (ret)
+ return ret;
+
+ data_buffer[0] |= DEVCTRL_PWR_OFF_MASK;
+
+ ret = dm_i2c_write(dev, TPS65911_DEVCTRL, data_buffer, 1);
+ if (ret)
+ return ret;
+
+ data_buffer[0] |= DEVCTRL_DEV_OFF_MASK;
+ data_buffer[0] &= ~DEVCTRL_DEV_ON_MASK;
+
+ ret = dm_i2c_write(dev, TPS65911_DEVCTRL, data_buffer, 1);
+ if (ret)
+ return ret;
+
+ // wait some time and then print error
+ mdelay(5000);
+ printf("Failed to power off!!!\n");
+ return 1;
+}
+#endif
+
+/*
+ * Routine: pinmux_init
+ * Description: Do individual peripheral pinmux configs
+ */
+void pinmux_init(void)
+{
+ pinmux_config_pingrp_table(transformer_pinmux_common,
+ ARRAY_SIZE(transformer_pinmux_common));
+
+ pinmux_config_drvgrp_table(transformer_padctrl,
+ ARRAY_SIZE(transformer_padctrl));
+
+ if (of_machine_is_compatible("asus,tf700t")) {
+ pinmux_config_pingrp_table(tf700t_mipi_pinmux,
+ ARRAY_SIZE(tf700t_mipi_pinmux));
+ }
+}
+
+#ifdef CONFIG_MMC_SDHCI_TEGRA
+static void tps65911_voltage_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(0, TPS65911_I2C_ADDRESS, 1, &dev);
+ if (ret) {
+ log_debug("cannot find PMIC I2C chip\n");
+ return;
+ }
+
+ /* TPS659110: LDO1_REG = 3.3v, ACTIVE to SDMMC4 */
+ ret = dm_i2c_reg_write(dev, TPS65911_LDO1, 0xc9);
+ if (ret)
+ log_debug("vcore_emmc set failed: %d\n", ret);
+
+ if (of_machine_is_compatible("asus,tf600t")) {
+ /* TPS659110: VDD1_REG = 1.2v, ACTIVE to backlight */
+ ret = dm_i2c_reg_write(dev, TPS65911_VDD1_OP, 0x33);
+ if (ret)
+ log_debug("vdd_bl set failed: %d\n", ret);
+
+ ret = dm_i2c_reg_write(dev, TPS65911_VDD1, 0x0d);
+ if (ret)
+ log_debug("vdd_bl enable failed: %d\n", ret);
+
+ /* TPS659110: LDO5_REG = 3.3v, ACTIVE to SDMMC1 VIO */
+ ret = dm_i2c_reg_write(dev, TPS65911_LDO5, 0x65);
+ if (ret)
+ log_debug("vdd_usd set failed: %d\n", ret);
+
+ /* TPS659110: LDO6_REG = 1.2v, ACTIVE to MIPI */
+ ret = dm_i2c_reg_write(dev, TPS65911_LDO6, 0x11);
+ if (ret)
+ log_debug("vdd_mipi set failed: %d\n", ret);
+ } else {
+ /* TPS659110: LDO2_REG = 3.1v, ACTIVE to SDMMC1 */
+ ret = dm_i2c_reg_write(dev, TPS65911_LDO2, 0xb9);
+ if (ret)
+ log_debug("vdd_usd set failed: %d\n", ret);
+
+ /* TPS659110: LDO3_REG = 3.1v, ACTIVE to SDMMC1 VIO */
+ ret = dm_i2c_reg_write(dev, TPS65911_LDO3, 0x5d);
+ if (ret)
+ log_debug("vddio_usd set failed: %d\n", ret);
+ }
+
+ /* TPS659110: GPIO0_REG output high to VDD_5V0_SBY */
+ ret = dm_i2c_reg_write(dev, TPS65911_GPIO0, 0x07);
+ if (ret)
+ log_debug("vdd_5v0_sby set failed: %d\n", ret);
+
+ /* TPS659110: GPIO6_REG output high to VDD_3V3_SYS */
+ ret = dm_i2c_reg_write(dev, TPS65911_GPIO6, 0x07);
+ if (ret)
+ log_debug("vdd_3v3_sys set failed: %d\n", ret);
+
+ /* TPS659110: GPIO7_REG output high to VDD_1V5_DDR */
+ ret = dm_i2c_reg_write(dev, TPS65911_GPIO7, 0x07);
+ if (ret)
+ log_debug("vdd_1v5_ddr set failed: %d\n", ret);
+
+ /* TPS659110: GPIO8_REG pull_down output high to VDD_5V0_SYS */
+ ret = dm_i2c_reg_write(dev, TPS65911_GPIO8, 0x0f);
+ if (ret)
+ log_debug("vdd_5v0_sys set failed: %d\n", ret);
+}
+
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the MMC muxes, power rails, etc.
+ */
+void pin_mux_mmc(void)
+{
+ /* Bring up uSD and eMMC power */
+ tps65911_voltage_init();
+}
+#endif /* MMC */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+ /* Remove TrustZone nodes */
+ fdt_del_node_and_alias(blob, "/firmware");
+ fdt_del_node_and_alias(blob, "/reserved-memory/trustzone@bfe00000");
+
+ return 0;
+}
+#endif
+
+void nvidia_board_late_init(void)
+{
+ char serialno_str[17];
+
+ /* Set chip id as serialno */
+ sprintf(serialno_str, "%016llx", tegra_chip_uid());
+ env_set("serial#", serialno_str);
+ env_set("platform", "Tegra 3 T30");
+}
--- /dev/null
+if TARGET_ENDEAVORU
+
+config SYS_BOARD
+ default "endeavoru"
+
+config SYS_VENDOR
+ default "htc"
+
+config SYS_CONFIG_NAME
+ default "endeavoru"
+
+endif
--- /dev/null
+ENDEAVORU BOARD
+M: Svyatoslav Ryhel <clamor95@gmail.com>
+S: Maintained
+F: board/htc/endeavoru/
+F: configs/endeavoru_defconfig
+F: doc/board/htc/endeavoru.rst
+F: include/configs/endeavoru.h
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2010-2012
+# NVIDIA Corporation <www.nvidia.com>
+#
+# (C) Copyright 2021
+# Svyatoslav Ryhel <clamor95@gmail.com>
+
+obj-$(CONFIG_SPL_BUILD) += endeavoru-spl.o
+
+obj-y += endeavoru.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * T30 HTC Endeavoru SPL stage configuration
+ *
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2022
+ * Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#include <common.h>
+#include <asm/arch-tegra/tegra_i2c.h>
+#include <linux/delay.h>
+
+/*
+ * Endeavoru uses TPS80032 PMIC with SMPS1 and SMPS2 in strandard
+ * mode with zero offset.
+ */
+
+#define TPS80032_DVS_I2C_ADDR (0x12 << 1)
+#define TPS80032_SMPS1_CFG_VOLTAGE_REG 0x56
+#define TPS80032_SMPS2_CFG_VOLTAGE_REG 0x5C
+#define TPS80032_SMPS1_CFG_VOLTAGE_DATA (0x2100 | TPS80032_SMPS1_CFG_VOLTAGE_REG)
+#define TPS80032_SMPS2_CFG_VOLTAGE_DATA (0x3000 | TPS80032_SMPS2_CFG_VOLTAGE_REG)
+
+#define TPS80032_CTL1_I2C_ADDR (0x48 << 1)
+#define TPS80032_SMPS1_CFG_STATE_REG 0x54
+#define TPS80032_SMPS2_CFG_STATE_REG 0x5A
+#define TPS80032_SMPS1_CFG_STATE_DATA (0x0100 | TPS80032_SMPS1_CFG_STATE_REG)
+#define TPS80032_SMPS2_CFG_STATE_DATA (0x0100 | TPS80032_SMPS2_CFG_STATE_REG)
+
+void pmic_enable_cpu_vdd(void)
+{
+ /* Set VDD_CORE to 1.200V. */
+ tegra_i2c_ll_write(TPS80032_DVS_I2C_ADDR, TPS80032_SMPS2_CFG_VOLTAGE_DATA);
+ udelay(1000);
+ tegra_i2c_ll_write(TPS80032_CTL1_I2C_ADDR, TPS80032_SMPS2_CFG_STATE_DATA);
+
+ udelay(1000);
+
+ /* Bring up VDD_CPU to 1.0125V. */
+ tegra_i2c_ll_write(TPS80032_DVS_I2C_ADDR, TPS80032_SMPS1_CFG_VOLTAGE_DATA);
+ udelay(1000);
+ tegra_i2c_ll_write(TPS80032_CTL1_I2C_ADDR, TPS80032_SMPS1_CFG_STATE_DATA);
+ udelay(10 * 1000);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2021
+ * Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <env.h>
+#include <fdt_support.h>
+#include <i2c.h>
+#include <log.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch-tegra/fuse.h>
+#include <asm/gpio.h>
+#include <linux/delay.h>
+#include "pinmux-config-endeavoru.h"
+
+#define TPS80032_CTL1_I2C_ADDR 0x48
+#define TPS80032_PHOENIX_DEV_ON 0x25
+#define DEVOFF BIT(0)
+#define TPS80032_LDO1_CFG_STATE 0x9E
+#define TPS80032_LDO1_CFG_VOLTAGE 0x9F
+
+#ifdef CONFIG_CMD_POWEROFF
+int do_poweroff(struct cmd_tbl *cmdtp, int flag,
+ int argc, char *const argv[])
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(0, TPS80032_CTL1_I2C_ADDR, 1, &dev);
+ if (ret) {
+ log_debug("cannot find PMIC I2C chip\n");
+ return 0;
+ }
+
+ ret = dm_i2c_reg_write(dev, TPS80032_PHOENIX_DEV_ON, DEVOFF);
+ if (ret)
+ return ret;
+
+ // wait some time and then print error
+ mdelay(5000);
+
+ printf("Failed to power off!!!\n");
+ return 1;
+}
+#endif
+
+/*
+ * Routine: pinmux_init
+ * Description: Do individual peripheral pinmux configs
+ */
+void pinmux_init(void)
+{
+ pinmux_config_pingrp_table(endeavoru_pinmux_common,
+ ARRAY_SIZE(endeavoru_pinmux_common));
+}
+
+#ifdef CONFIG_MMC_SDHCI_TEGRA
+static void tps80032_voltage_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(0, TPS80032_CTL1_I2C_ADDR, 1, &dev);
+ if (ret)
+ log_debug("cannot find PMIC I2C chip\n");
+
+ /* TPS80032: LDO1_REG = 1.2v to DSI */
+ ret = dm_i2c_reg_write(dev, TPS80032_LDO1_CFG_VOLTAGE, 0x03);
+ if (ret)
+ log_debug("avdd_dsi_csi voltage set failed: %d\n", ret);
+
+ /* TPS80032: LDO1_REG enable */
+ ret = dm_i2c_reg_write(dev, TPS80032_LDO1_CFG_STATE, 0x01);
+ if (ret)
+ log_debug("avdd_dsi_csi enable failed: %d\n", ret);
+}
+
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the MMC muxes, power rails, etc.
+ */
+void pin_mux_mmc(void)
+{
+ /* Bring up DSI power */
+ tps80032_voltage_init();
+}
+#endif /* MMC */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+ /* Remove TrustZone nodes */
+ fdt_del_node_and_alias(blob, "/firmware");
+ fdt_del_node_and_alias(blob, "/reserved-memory/trustzone@bfe00000");
+
+ return 0;
+}
+#endif
+
+void nvidia_board_late_init(void)
+{
+ char serialno_str[17];
+
+ /* Set chip id as serialno */
+ sprintf(serialno_str, "%016llx", tegra_chip_uid());
+ env_set("serial#", serialno_str);
+ env_set("platform", "Tegra 3 T30");
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Copyright (c) 2022, Svyatoslav Ryhel.
+ */
+
+#ifndef _PINMUX_CONFIG_ENDEAVORU_H_
+#define _PINMUX_CONFIG_ENDEAVORU_H_
+
+#define DEFAULT_PINMUX(_pingrp, _mux, _pull, _tri, _io) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_DEFAULT, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define I2C_PINMUX(_pingrp, _mux, _pull, _tri, _io, _lock, _od) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_##_od, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define LV_PINMUX(_pingrp, _mux, _pull, _tri, _io, _lock, _ioreset) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_##_ioreset \
+ }
+
+#define DEFAULT_PADCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+ { \
+ .drvgrp = PMUX_DRVGRP_##_drvgrp, \
+ .slwf = _slwf, \
+ .slwr = _slwr, \
+ .drvup = _drvup, \
+ .drvdn = _drvdn, \
+ .lpmd = PMUX_LPMD_##_lpmd, \
+ .schmt = PMUX_SCHMT_##_schmt, \
+ .hsm = PMUX_HSM_##_hsm, \
+ }
+
+static struct pmux_pingrp_config endeavoru_pinmux_common[] = {
+ /* SDMMC1 pinmux */
+ DEFAULT_PINMUX(SDMMC1_CLK_PZ0, SDMMC1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SDMMC1_CMD_PZ1, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT3_PY4, UARTE, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT2_PY5, UARTE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT1_PY6, RSVD2, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT0_PY7, SDMMC1, UP, NORMAL, INPUT),
+
+ /* SDMMC3 pinmux */
+ DEFAULT_PINMUX(SDMMC3_CLK_PA6, SDMMC3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CMD_PA7, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT0_PB7, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT1_PB6, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT2_PB5, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT3_PB4, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT4_PD1, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT5_PD0, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT6_PD3, INVALID, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT7_PD4, INVALID, NORMAL, NORMAL, INPUT),
+
+ /* SDMMC4 pinmux */
+ LV_PINMUX(SDMMC4_CLK_PCC4, SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_CMD_PT7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT0_PAA0, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT1_PAA1, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT2_PAA2, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT3_PAA3, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT4_PAA4, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT5_PAA5, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT6_PAA6, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT7_PAA7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_RST_N_PCC3, RSVD2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* I2C pinmux */
+ I2C_PINMUX(GEN1_I2C_SCL_PC4, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN1_I2C_SDA_PC5, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN2_I2C_SCL_PT5, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN2_I2C_SDA_PT6, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(CAM_I2C_SCL_PBB1, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(CAM_I2C_SDA_PBB2, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(DDC_SCL_PV4, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(DDC_SDA_PV5, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(PWR_I2C_SCL_PZ6, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(PWR_I2C_SDA_PZ7, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* HDMI pinmux */
+ DEFAULT_PINMUX(HDMI_CEC_PEE3, CEC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(HDMI_INT_PN7, RSVD1, NORMAL, TRISTATE, INPUT),
+
+ /* ULPI pinmux */
+ DEFAULT_PINMUX(ULPI_DATA0_PO1, UARTA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_DATA1_PO2, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA2_PO3, SPI3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA3_PO4, HSI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA4_PO5, SPI2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA5_PO6, ULPI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA6_PO7, ULPI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA7_PO0, SPI2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_CLK_PY0, RSVD2, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_DIR_PY1, RSVD2, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_NXT_PY2, ULPI, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_STP_PY3, ULPI, NORMAL, NORMAL, INPUT),
+
+ /* DAP3 pinmux */
+ DEFAULT_PINMUX(DAP3_FS_PP0, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_DIN_PP1, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_DOUT_PP2, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_SCLK_PP3, I2S2, NORMAL, NORMAL, INPUT),
+
+ /* PV-gpio group pinmux */
+ DEFAULT_PINMUX(PV0, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PV1, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PV2, RSVD2, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PV3, RSVD2, NORMAL, NORMAL, OUTPUT),
+
+ /* CLK2 pinmux */
+ DEFAULT_PINMUX(CLK2_OUT_PW5, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK2_REQ_PCC5, RSVD4, NORMAL, NORMAL, OUTPUT),
+
+ /* LCD pinmux */
+ DEFAULT_PINMUX(LCD_PWR1_PC1, RSVD4, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(LCD_PWR2_PC6, DISPLAYA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(LCD_SDIN_PZ2, DISPLAYA, UP, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(LCD_SDOUT_PN5, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_WR_N_PZ3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_CS0_N_PN4, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_DC0_PN6, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_SCK_PZ4, DISPLAYA, UP, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(LCD_PWR0_PB2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_PCLK_PB3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_DE_PJ1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_HSYNC_PJ3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_VSYNC_PJ4, DISPLAYA, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D0_PE0, DISPLAYA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(LCD_D1_PE1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D2_PE2, RSVD3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(LCD_D3_PE3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D4_PE4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D5_PE5, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D6_PE6, RSVD3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D7_PE7, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D8_PF0, RSVD4, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D9_PF1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D10_PF2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D11_PF3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D12_PF4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D13_PF5, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D14_PF6, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D15_PF7, RSVD4, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(LCD_D16_PM0, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D17_PM1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D18_PM2, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D19_PM3, RSVD4, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(LCD_D20_PM4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D21_PM5, RSVD4, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(LCD_D22_PM6, RSVD4, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(LCD_D23_PM7, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_CS1_N_PW0, RSVD4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_M1_PW1, DISPLAYA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(LCD_DC1_PD2, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CRT_HSYNC_PV6, CRT, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CRT_VSYNC_PV7, RSVD4, NORMAL, NORMAL, OUTPUT),
+
+ /* VI-group pinmux */
+ LV_PINMUX(VI_D0_PT4, INVALID, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D1_PD5, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D2_PL0, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D3_PL1, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D4_PL2, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D5_PL3, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D6_PL4, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D7_PL5, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D8_PL6, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D9_PL7, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D10_PT2, INVALID, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D11_PT3, INVALID, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_PCLK_PT0, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_MCLK_PT1, INVALID, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_VSYNC_PD6, INVALID, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_HSYNC_PD7, INVALID, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* UART-2 pinmux */
+ DEFAULT_PINMUX(UART2_RXD_PC3, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART2_TXD_PC2, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART2_RTS_N_PJ6, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART2_CTS_N_PJ5, SPI4, NORMAL, NORMAL, INPUT),
+
+ /* UART-3 pinmux */
+ DEFAULT_PINMUX(UART3_TXD_PW6, UARTC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART3_RXD_PW7, UARTC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_CTS_N_PA1, UARTC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_RTS_N_PC0, UARTC, NORMAL, NORMAL, OUTPUT),
+
+ /* PU-gpio group pinmux */
+ DEFAULT_PINMUX(PU0, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU1, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU2, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU3, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU4, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU5, RSVD4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU6, PWM3, UP, TRISTATE, INPUT),
+
+ /* DAP4 pinmux */
+ DEFAULT_PINMUX(DAP4_FS_PP4, I2S3, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DIN_PP5, I2S3, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DOUT_PP6, RSVD4, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(DAP4_SCLK_PP7, RSVD4, NORMAL, NORMAL, OUTPUT),
+
+ /* CLK3 pinmux */
+ DEFAULT_PINMUX(CLK3_OUT_PEE0, EXTPERIPH3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(CLK3_REQ_PEE1, RSVD4, NORMAL, TRISTATE, INPUT),
+
+ /* GMI pinmux */
+ DEFAULT_PINMUX(GMI_WP_N_PC7, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_IORDY_PI5, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_WAIT_PI7, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_ADV_N_PK0, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CLK_PK1, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS0_N_PJ0, GMI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS1_N_PJ2, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS2_N_PK3, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS3_N_PK4, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS4_N_PK2, RSVD4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS6_N_PI3, NAND, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS7_N_PI6, NAND, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD0_PG0, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD1_PG1, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD2_PG2, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD3_PG3, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD4_PG4, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD5_PG5, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD6_PG6, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD7_PG7, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD8_PH0, PWM0, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD9_PH1, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD10_PH2, NAND, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD11_PH3, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD12_PH4, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD13_PH5, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD14_PH6, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD15_PH7, NAND, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_A16_PJ7, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_A17_PB0, UARTD, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A18_PB1, UARTD, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A19_PK7, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_WR_N_PI0, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_OE_N_PI1, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_DQS_PI2, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_RST_N_PI4, RSVD4, UP, TRISTATE, INPUT),
+
+ DEFAULT_PINMUX(CAM_MCLK_PCC0, VI_ALT3, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(PCC1, RSVD3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB0, RSVD3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB3, VGP3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PBB4, VGP4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB5, VGP5, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB6, VGP6, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB7, RSVD3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PCC2, RSVD3, UP, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(JTAG_RTCK_PU7, RTCK, UP, NORMAL, INPUT),
+
+ /* KBC keys */
+ DEFAULT_PINMUX(KB_ROW0_PR0, RSVD4, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW1_PR1, KBC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW2_PR2, RSVD4, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW3_PR3, RSVD3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW4_PR4, RSVD4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW5_PR5, KBC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW6_PR6, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW7_PR7, KBC, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW8_PS0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW9_PS1, KBC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW10_PS2, KBC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW11_PS3, KBC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW12_PS4, KBC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW13_PS5, KBC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW14_PS6, KBC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW15_PS7, KBC, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(KB_COL0_PQ0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL1_PQ1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL2_PQ2, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL3_PQ3, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL4_PQ4, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL5_PQ5, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL6_PQ6, KBC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL7_PQ7, KBC, NORMAL, NORMAL, INPUT),
+
+ /* CLK */
+ DEFAULT_PINMUX(CLK_32K_OUT_PA0, BLINK, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SYS_CLK_REQ_PZ5, SYSCLK, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(OWR, OWR, UP, NORMAL, INPUT),
+
+ /* DAP1 pinmux */
+ DEFAULT_PINMUX(DAP1_FS_PN0, I2S0, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(DAP1_DIN_PN1, I2S0, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(DAP1_DOUT_PN2, I2S0, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP1_SCLK_PN3, I2S0, NORMAL, TRISTATE, OUTPUT),
+
+ /* CLK1 pinmux */
+ DEFAULT_PINMUX(CLK1_REQ_PEE2, DAP, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK1_OUT_PW4, RSVD4, NORMAL, NORMAL, INPUT),
+
+ /* SPDIF pinmux */
+ DEFAULT_PINMUX(SPDIF_IN_PK6, SPDIF, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SPDIF_OUT_PK5, SPDIF, NORMAL, TRISTATE, OUTPUT),
+
+ /* DAP2 pinmux */
+ DEFAULT_PINMUX(DAP2_FS_PA2, I2S1, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DIN_PA4, I2S1, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DOUT_PA5, I2S1, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_SCLK_PA3, I2S1, DOWN, NORMAL, INPUT),
+
+ /* SPI pinmux */
+ DEFAULT_PINMUX(SPI2_MOSI_PX0, SPI2, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SPI2_MISO_PX1, SPI2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI2_CS0_N_PX3, SPI2, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SPI2_SCK_PX2, SPI2, NORMAL, NORMAL, OUTPUT),
+
+ DEFAULT_PINMUX(SPI2_CS1_N_PW2, SPI2, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI2_CS2_N_PW3, SPI2, UP, TRISTATE, INPUT),
+
+ DEFAULT_PINMUX(SPI1_MOSI_PX4, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_SCK_PX5, SPI2, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_CS0_N_PX6, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_MISO_PX7, RSVD4, NORMAL, NORMAL, OUTPUT),
+
+ /* PEX pinmux */
+ DEFAULT_PINMUX(PEX_L0_PRSNT_N_PDD0, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L0_RST_N_PDD1, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L0_CLKREQ_N_PDD2, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_WAKE_N_PDD3, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L1_PRSNT_N_PDD4, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L1_RST_N_PDD5, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L1_CLKREQ_N_PDD6, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L2_PRSNT_N_PDD7, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L2_RST_N_PCC6, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L2_CLKREQ_N_PCC7, PCIE, NORMAL, NORMAL, INPUT),
+};
+
+#endif /* _PINMUX_CONFIG_TRANSFORMER_H_ */
--- /dev/null
+if TARGET_X3_T30
+
+config SYS_BOARD
+ default "x3-t30"
+
+config SYS_VENDOR
+ default "lg"
+
+config SYS_CONFIG_NAME
+ default "x3-t30"
+
+config DEVICE_P880
+ bool "Enable support for LG Optimus 4X HD"
+ default n
+ help
+ LG Optimus 4X HD derives from x3 board but has slight
+ differences.
+
+config DEVICE_P895
+ bool "Enable support for LG Optimus Vu"
+ default n
+ help
+ LG Optimus Vu derives from x3 board but has slight
+ differences.
+
+endif
--- /dev/null
+X3 BOARD
+M: Svyatoslav Ryhel <clamor95@gmail.com>
+S: Maintained
+F: board/lg/x3-t30/
+F: configs/p880.config
+F: configs/p895.config
+F: configs/x3_t30_defconfig
+F: doc/board/lg/x3_t30.rst
+F: include/configs/x3-t30.h
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2010-2012
+# NVIDIA Corporation <www.nvidia.com>
+#
+# (C) Copyright 2021
+# Svyatoslav Ryhel <clamor95@gmail.com>
+
+obj-$(CONFIG_SPL_BUILD) += x3-t30-spl.o
+
+obj-y += x3-t30.o
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Copyright (c) 2021, Svyatoslav Ryhel.
+ */
+
+#ifndef _PINMUX_CONFIG_X3_H_
+#define _PINMUX_CONFIG_X3_H_
+
+#define DEFAULT_PINMUX(_pingrp, _mux, _pull, _tri, _io) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_DEFAULT, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define I2C_PINMUX(_pingrp, _mux, _pull, _tri, _io, _lock, _od) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_##_od, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define LV_PINMUX(_pingrp, _mux, _pull, _tri, _io, _lock, _ioreset) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_##_ioreset \
+ }
+
+static struct pmux_pingrp_config tegra3_x3_pinmux_common[] = {
+ /* SDMMC1 pinmux */
+ DEFAULT_PINMUX(SDMMC1_CLK_PZ0, SDMMC1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_CMD_PZ1, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT3_PY4, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT2_PY5, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT1_PY6, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT0_PY7, SDMMC1, UP, NORMAL, INPUT),
+
+ /* SDMMC3 pinmux */
+// DEFAULT_PINMUX(SDMMC3_CLK_PA6, SDMMC3, NORMAL, TRISTATE, INPUT), // device specific
+// DEFAULT_PINMUX(SDMMC3_CMD_PA7, SDMMC3, NORMAL, TRISTATE, INPUT), // device specific
+// DEFAULT_PINMUX(SDMMC3_DAT0_PB7, RSVD1, NORMAL, TRISTATE, INPUT), // device specific
+// DEFAULT_PINMUX(SDMMC3_DAT1_PB6, RSVD1, NORMAL, NORMAL, INPUT), // device specific
+// DEFAULT_PINMUX(SDMMC3_DAT2_PB5, RSVD1, NORMAL, TRISTATE, INPUT), // device specific
+// DEFAULT_PINMUX(SDMMC3_DAT3_PB4, RSVD1, NORMAL, TRISTATE, INPUT), // device specific
+// DEFAULT_PINMUX(SDMMC3_DAT4_PD1, SDMMC3, NORMAL, TRISTATE, INPUT), // device specific
+// DEFAULT_PINMUX(SDMMC3_DAT5_PD0, SDMMC3, NORMAL, TRISTATE, INPUT), // device specific
+// DEFAULT_PINMUX(SDMMC3_DAT6_PD3, SDMMC3, NORMAL, TRISTATE, INPUT), // device specific
+// DEFAULT_PINMUX(SDMMC3_DAT7_PD4, RSVD2, NORMAL, TRISTATE, INPUT), // device specific
+
+ /* SDMMC4 pinmux */
+ LV_PINMUX(SDMMC4_CLK_PCC4, SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+// LV_PINMUX(SDMMC4_CMD_PT7, SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE), // device specific
+ LV_PINMUX(SDMMC4_DAT0_PAA0, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT1_PAA1, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT2_PAA2, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT3_PAA3, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT4_PAA4, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT5_PAA5, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT6_PAA6, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT7_PAA7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_RST_N_PCC3, RSVD2, DOWN, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* I2C1 pinmux */
+ I2C_PINMUX(GEN1_I2C_SCL_PC4, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN1_I2C_SDA_PC5, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* I2C2 pinmux */
+ I2C_PINMUX(GEN2_I2C_SCL_PT5, I2C2, UP, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN2_I2C_SDA_PT6, I2C2, UP, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* I2C3 pinmux */
+ I2C_PINMUX(CAM_I2C_SCL_PBB1, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(CAM_I2C_SDA_PBB2, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* I2C4 pinmux */
+ I2C_PINMUX(DDC_SCL_PV4, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(DDC_SDA_PV5, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* Power I2C pinmux */
+ I2C_PINMUX(PWR_I2C_SCL_PZ6, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(PWR_I2C_SDA_PZ7, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* HDMI-CEC pinmux */
+ DEFAULT_PINMUX(HDMI_CEC_PEE3, CEC, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(HDMI_INT_PN7, RSVD1, NORMAL, TRISTATE, INPUT),
+
+ /* ULPI pinmux */
+ DEFAULT_PINMUX(ULPI_DATA0_PO1, SPI3, UP, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(ULPI_DATA1_PO2, SPI3, UP, NORMAL, OUTPUT), // LCD_BRIDGE_RESET_N
+ DEFAULT_PINMUX(ULPI_DATA2_PO3, SPI3, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA3_PO4, SPI3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA4_PO5, ULPI, UP, NORMAL, INPUT),
+// DEFAULT_PINMUX(ULPI_DATA5_PO6, SPI2, UP, TRISTATE, INPUT), // unconfigured
+// DEFAULT_PINMUX(ULPI_DATA6_PO7, SPI2, UP, NORMAL, INPUT), // device specific
+// DEFAULT_PINMUX(ULPI_DATA7_PO0, SPI2, UP, NORMAL, INPUT), // unconfigured
+ DEFAULT_PINMUX(ULPI_CLK_PY0, RSVD2, DOWN, NORMAL, OUTPUT), // LCD_EN
+ DEFAULT_PINMUX(ULPI_DIR_PY1, RSVD2, UP, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_NXT_PY2, RSVD2, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_STP_PY3, SPI1, NORMAL, NORMAL, OUTPUT),
+
+ /* DAP3 pinmux */
+ DEFAULT_PINMUX(DAP3_FS_PP0, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_DIN_PP1, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_DOUT_PP2, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_SCLK_PP3, I2S2, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(PV0, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(PV1, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PV2, OWR, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PV3, RSVD2, DOWN, NORMAL, INPUT),
+
+ /* CLK2 pinmux */
+ DEFAULT_PINMUX(CLK2_OUT_PW5, RSVD2, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK2_REQ_PCC5, DAP, NORMAL, NORMAL, OUTPUT),
+
+ /* LCD pinmux */
+ DEFAULT_PINMUX(LCD_PWR1_PC1, DISPLAYA, NORMAL, NORMAL, OUTPUT),
+// DEFAULT_PINMUX(LCD_PWR2_PC6, DISPLAYA, DOWN, TRISTATE, OUTPUT), // unconfigured
+ DEFAULT_PINMUX(LCD_SDIN_PZ2, SPI5, NORMAL, NORMAL, INPUT), // LCD_RGB_SDI
+ DEFAULT_PINMUX(LCD_SDOUT_PN5, SPI5, NORMAL, NORMAL, INPUT), // LCD_RGB_SDO
+ DEFAULT_PINMUX(LCD_WR_N_PZ3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_CS0_N_PN4, SPI5, NORMAL, NORMAL, INPUT), // LCD_RGB_CS
+ DEFAULT_PINMUX(LCD_DC0_PN6, RSVD3, NORMAL, NORMAL, OUTPUT), // LCD_CP_EN / BL
+ DEFAULT_PINMUX(LCD_SCK_PZ4, SPI5, NORMAL, NORMAL, INPUT), // LCD_RGB_SCL
+ DEFAULT_PINMUX(LCD_PWR0_PB2, DISPLAYA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(LCD_PCLK_PB3, DISPLAYA, NORMAL, NORMAL, INPUT), // LCD_RGB_PCLK
+ DEFAULT_PINMUX(LCD_DE_PJ1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_HSYNC_PJ3, DISPLAYA, NORMAL, NORMAL, INPUT), // LCD_RGB_HSYNC
+ DEFAULT_PINMUX(LCD_VSYNC_PJ4, DISPLAYA, NORMAL, NORMAL, INPUT), // LCD_RGB_VSYNC
+ DEFAULT_PINMUX(LCD_D0_PE0, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D1_PE1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D2_PE2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D3_PE3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D4_PE4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D5_PE5, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D6_PE6, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D7_PE7, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D8_PF0, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D9_PF1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D10_PF2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D11_PF3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D12_PF4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D13_PF5, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D14_PF6, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D15_PF7, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D16_PM0, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D17_PM1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D18_PM2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D19_PM3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D20_PM4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D21_PM5, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D22_PM6, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D23_PM7, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_CS1_N_PW0, RSVD4, UP, NORMAL, OUTPUT), // LCD_RESET_N
+ DEFAULT_PINMUX(LCD_M1_PW1, DISPLAYA, NORMAL, TRISTATE, OUTPUT), // LCD_MAKER_ID
+ DEFAULT_PINMUX(LCD_DC1_PD2, RSVD3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(CRT_HSYNC_PV6, RSVD2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CRT_VSYNC_PV7, RSVD2, NORMAL, NORMAL, INPUT),
+
+ /* VI-group pinmux */
+ LV_PINMUX(VI_D0_PT4, RSVD2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D1_PD5, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D2_PL0, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D3_PL1, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D4_PL2, VI, NORMAL, NORMAL, OUTPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D5_PL3, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D6_PL4, VI, NORMAL, NORMAL, OUTPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D7_PL5, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D8_PL6, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D9_PL7, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D10_PT2, RSVD2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D11_PT3, RSVD2, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_PCLK_PT0, RSVD1, UP, TRISTATE, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_MCLK_PT1, VI, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_HSYNC_PD7, RSVD2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_VSYNC_PD6, RSVD2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* UART-B pinmux */
+// DEFAULT_PINMUX(UART2_RXD_PC3, UARTB, NORMAL, NORMAL, INPUT), // device specific
+// DEFAULT_PINMUX(UART2_TXD_PC2, UARTB, NORMAL, NORMAL, OUTPUT), // device specific
+ DEFAULT_PINMUX(UART2_RTS_N_PJ6, UARTB, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART2_CTS_N_PJ5, UARTB, NORMAL, NORMAL, INPUT),
+
+ /* UART-C pinmux */
+ DEFAULT_PINMUX(UART3_TXD_PW6, UARTC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART3_RXD_PW7, UARTC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_CTS_N_PA1, UARTC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_RTS_N_PC0, UARTC, NORMAL, NORMAL, OUTPUT),
+
+ /* PU-gpio group pinmux */
+// DEFAULT_PINMUX(PU0, UARTA, NORMAL, NORMAL, OUTPUT), // device specific
+// DEFAULT_PINMUX(PU1, UARTA, NORMAL, NORMAL, INPUT), // device specific
+// DEFAULT_PINMUX(PU2, RSVD1, NORMAL, TRISTATE, INPUT), // device specific
+// DEFAULT_PINMUX(PU3, PWM0, NORMAL, TRISTATE, INPUT), // device specific
+// DEFAULT_PINMUX(PU4, PWM1, NORMAL, TRISTATE, INPUT), // device specific
+ DEFAULT_PINMUX(PU5, RSVD4, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PU6, PWM3, DOWN, NORMAL, INPUT),
+
+ /* DAP4 pinmux */
+ DEFAULT_PINMUX(DAP4_FS_PP4, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DIN_PP5, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DOUT_PP6, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_SCLK_PP7, I2S3, NORMAL, NORMAL, INPUT),
+
+ /* CLK3 pinmux */
+ DEFAULT_PINMUX(CLK3_OUT_PEE0, EXTPERIPH3, NORMAL, NORMAL, OUTPUT), // MIPI_BRIDGE_CLK
+ DEFAULT_PINMUX(CLK3_REQ_PEE1, DEV3, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(CAM_MCLK_PCC0, VI_ALT2, UP, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(PCC1, RSVD3, NORMAL, NORMAL, OUTPUT),
+// DEFAULT_PINMUX(PBB0, RSVD2, NORMAL, NORMAL, OUTPUT), // device specific
+ DEFAULT_PINMUX(PBB3, VGP3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PBB4, VGP4, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PBB5, VGP5, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PBB6, VGP6, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB7, I2S4, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PCC2, RSVD3, NORMAL, NORMAL, OUTPUT),
+
+ DEFAULT_PINMUX(JTAG_RTCK_PU7, RTCK, NORMAL, NORMAL, OUTPUT),
+
+ /* KBC keys */
+ DEFAULT_PINMUX(KB_ROW0_PR0, RSVD4, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW1_PR1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW2_PR2, RSVD4, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW3_PR3, RSVD3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW4_PR4, RSVD4, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW5_PR5, KBC, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW6_PR6, KBC, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW7_PR7, KBC, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW8_PS0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW9_PS1, KBC, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW10_PS2, KBC, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW11_PS3, KBC, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW12_PS4, KBC, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW13_PS5, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW14_PS6, KBC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW15_PS7, KBC, DOWN, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(KB_COL0_PQ0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL1_PQ1, KBC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_COL2_PQ2, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL3_PQ3, KBC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL4_PQ4, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL5_PQ5, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL6_PQ6, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL7_PQ7, KBC, UP, NORMAL, INPUT),
+
+ /* CLK */
+ DEFAULT_PINMUX(CLK_32K_OUT_PA0, BLINK, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SYS_CLK_REQ_PZ5, SYSCLK, NORMAL, NORMAL, INPUT),
+// DEFAULT_PINMUX(CORE_PWR_REQ, RSVD1, NORMAL, NORMAL, INPUT), // unconfigured
+// DEFAULT_PINMUX(CPU_PWR_REQ, RSVD1, NORMAL, NORMAL, INPUT), // unconfigured
+// DEFAULT_PINMUX(PWR_INT_N, RSVD1, NORMAL, NORMAL, INPUT), // unconfigured
+// DEFAULT_PINMUX(CLK_32K_IN, RSVD1, NORMAL, NORMAL, INPUT), // unconfigured
+ DEFAULT_PINMUX(OWR, OWR, NORMAL, NORMAL, INPUT),
+
+ /* DAP1 pinmux */
+ DEFAULT_PINMUX(DAP1_FS_PN0, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_DIN_PN1, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_DOUT_PN2, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_SCLK_PN3, I2S0, NORMAL, NORMAL, INPUT),
+
+ /* CLK1 pinmux */
+ DEFAULT_PINMUX(CLK1_REQ_PEE2, DAP, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK1_OUT_PW4, EXTPERIPH1, DOWN, NORMAL, INPUT),
+
+ /* SPDIF pinmux */
+ DEFAULT_PINMUX(SPDIF_IN_PK6, SPDIF, NORMAL, NORMAL, OUTPUT),
+// DEFAULT_PINMUX(SPDIF_OUT_PK5, SPDIF, DOWN, NORMAL, OUTPUT), // device specific
+
+ /* DAP2 pinmux */
+ DEFAULT_PINMUX(DAP2_FS_PA2, HDA, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DIN_PA4, HDA, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DOUT_PA5, HDA, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_SCLK_PA3, HDA, DOWN, NORMAL, INPUT),
+
+ /* SPI pinmux */
+ DEFAULT_PINMUX(SPI1_MOSI_PX4, SPI2, NORMAL, NORMAL, OUTPUT),
+// DEFAULT_PINMUX(SPI1_SCK_PX5, SPI1, NORMAL, NORMAL, OUTPUT), // device specific
+// DEFAULT_PINMUX(SPI1_CS0_N_PX6, GMI, NORMAL, NORMAL, INPUT), // device specific
+ DEFAULT_PINMUX(SPI1_MISO_PX7, RSVD4, NORMAL, NORMAL, OUTPUT),
+
+ DEFAULT_PINMUX(SPI2_MOSI_PX0, SPI2, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SPI2_MISO_PX1, GMI, NORMAL, NORMAL, OUTPUT),
+// DEFAULT_PINMUX(SPI2_CS0_N_PX3, SPI6, UP, NORMAL, INPUT), // unconfigured
+// DEFAULT_PINMUX(SPI2_SCK_PX2, SPI6, UP, NORMAL, INPUT), // unconfigured
+ DEFAULT_PINMUX(SPI2_CS1_N_PW2, SPI2, NORMAL, NORMAL, INPUT),
+// DEFAULT_PINMUX(SPI2_CS2_N_PW3, SPI2, UP, TRISTATE, INPUT), // unconfigured
+
+ /* PEX pinmux */
+ DEFAULT_PINMUX(PEX_L0_PRSNT_N_PDD0, PCIE, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PEX_L0_RST_N_PDD1, PCIE, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(PEX_L0_CLKREQ_N_PDD2, PCIE, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PEX_WAKE_N_PDD3, PCIE, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PEX_L1_PRSNT_N_PDD4, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L1_RST_N_PDD5, PCIE, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PEX_L1_CLKREQ_N_PDD6, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L2_PRSNT_N_PDD7, PCIE, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PEX_L2_RST_N_PCC6, PCIE, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PEX_L2_CLKREQ_N_PCC7, PCIE, NORMAL, TRISTATE, INPUT),
+
+ /* GMI pinmux */
+ DEFAULT_PINMUX(GMI_WP_N_PC7, GMI, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_IORDY_PI5, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_WAIT_PI7, GMI, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_ADV_N_PK0, GMI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CLK_PK1, GMI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS0_N_PJ0, GMI, UP, TRISTATE, INPUT), // LCD_RGB_DE
+ DEFAULT_PINMUX(GMI_CS1_N_PJ2, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS2_N_PK3, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS3_N_PK4, RSVD1, NORMAL, NORMAL, OUTPUT),
+// DEFAULT_PINMUX(GMI_CS4_N_PK2, RSVD4, UP, NORMAL, INPUT), // device specific
+ DEFAULT_PINMUX(GMI_CS6_N_PI3, GMI, UP, NORMAL, INPUT),
+// DEFAULT_PINMUX(GMI_CS7_N_PI6, GMI, UP, NORMAL, INPUT), // device specific
+ DEFAULT_PINMUX(GMI_AD0_PG0, GMI, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD1_PG1, GMI, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD2_PG2, GMI, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD3_PG3, GMI, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD4_PG4, GMI, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD5_PG5, GMI, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD6_PG6, GMI, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD7_PG7, GMI, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD8_PH0, GMI, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD9_PH1, GMI, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD10_PH2, GMI, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD11_PH3, PWM3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD12_PH4, RSVD4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD13_PH5, RSVD4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD14_PH6, GMI, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD15_PH7, GMI, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_A16_PJ7, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_A17_PB0, UARTD, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A18_PB1, UARTD, DOWN, NORMAL, OUTPUT), // RGB_IC_EN
+ DEFAULT_PINMUX(GMI_A19_PK7, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_WR_N_PI0, GMI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_OE_N_PI1, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_DQS_PI2, GMI, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_RST_N_PI4, GMI, UP, NORMAL, INPUT),
+};
+
+#ifdef CONFIG_DEVICE_P880
+static struct pmux_pingrp_config tegra3_p880_pinmux[] = {
+ /* SDMMC3 pinmux */
+ DEFAULT_PINMUX(SDMMC3_CLK_PA6, SDMMC3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CMD_PA7, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT0_PB7, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT1_PB6, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT2_PB5, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT3_PB4, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT4_PD1, SDMMC3, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT5_PD0, SDMMC3, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT6_PD3, SDMMC3, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT7_PD4, SDMMC3, UP, TRISTATE, INPUT),
+
+ /* SDMMC4 pinmux */
+ LV_PINMUX(SDMMC4_CMD_PT7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* ULPI pinmux */
+ DEFAULT_PINMUX(ULPI_DATA6_PO7, SPI2, NORMAL, NORMAL, INPUT),
+
+ /* UART-B pinmux */
+ DEFAULT_PINMUX(UART2_RXD_PC3, UARTB, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART2_TXD_PC2, UARTB, UP, NORMAL, OUTPUT),
+
+ /* GPIO group pinmux */
+ DEFAULT_PINMUX(PU0, UARTA, UP, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PU1, UARTA, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU2, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU3, UARTA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PU4, PWM1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB0, I2S4, NORMAL, TRISTATE, INPUT),
+
+ /* SPDIF pinmux */
+ DEFAULT_PINMUX(SPDIF_OUT_PK5, SPDIF, UP, TRISTATE, OUTPUT),
+
+ /* SPI pinmux */
+ DEFAULT_PINMUX(SPI1_SCK_PX5, SPI2, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SPI1_CS0_N_PX6, SPI1, NORMAL, NORMAL, INPUT),
+
+ /* GMI pinmux */
+ DEFAULT_PINMUX(GMI_CS4_N_PK2, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS7_N_PI6, GMI, DOWN, NORMAL, OUTPUT),
+};
+#endif /* CONFIG_DEVICE_P880 */
+
+#ifdef CONFIG_DEVICE_P895
+static struct pmux_pingrp_config tegra3_p895_pinmux[] = {
+ /* SDMMC3 pinmux */
+ DEFAULT_PINMUX(SDMMC3_CLK_PA6, SDMMC3, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CMD_PA7, SDMMC3, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT0_PB7, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT1_PB6, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT2_PB5, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT3_PB4, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT4_PD1, SDMMC3, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT5_PD0, SDMMC3, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT6_PD3, SDMMC3, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT7_PD4, RSVD2, NORMAL, TRISTATE, INPUT),
+
+ /* SDMMC4 pinmux */
+ LV_PINMUX(SDMMC4_CMD_PT7, SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* ULPI pinmux */
+ DEFAULT_PINMUX(ULPI_DATA6_PO7, SPI2, UP, NORMAL, INPUT),
+
+ /* UART-B pinmux */
+ DEFAULT_PINMUX(UART2_RXD_PC3, UARTB, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART2_TXD_PC2, UARTB, NORMAL, NORMAL, OUTPUT),
+
+ /* Gpio group pinmux */
+ DEFAULT_PINMUX(PU0, UARTA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PU1, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU2, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PU3, PWM0, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PU4, PWM1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PBB0, RSVD2, NORMAL, NORMAL, OUTPUT), // LCD_EN_3V0
+
+ /* SPDIF pinmux */
+ DEFAULT_PINMUX(SPDIF_OUT_PK5, SPDIF, DOWN, NORMAL, OUTPUT),
+
+ /* SPI pinmux */
+ DEFAULT_PINMUX(SPI1_SCK_PX5, SPI1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SPI1_CS0_N_PX6, GMI, NORMAL, NORMAL, INPUT),
+
+ /* GMI pinmux */
+ DEFAULT_PINMUX(GMI_CS4_N_PK2, RSVD4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS7_N_PI6, GMI, UP, NORMAL, INPUT),
+};
+#endif /* CONFIG_DEVICE_P895 */
+#endif /* _PINMUX_CONFIG_X3_H_ */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * T30 LGE X3 SPL stage configuration
+ *
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2022
+ * Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#include <common.h>
+#include <asm/arch-tegra/tegra_i2c.h>
+#include <linux/delay.h>
+
+#define MAX77663_I2C_ADDR (0x1C << 1)
+
+#define MAX77663_REG_SD0 0x16
+#define MAX77663_REG_SD0_DATA (0x2100 | MAX77663_REG_SD0)
+#define MAX77663_REG_SD1 0x17
+#define MAX77663_REG_SD1_DATA (0x3000 | MAX77663_REG_SD1)
+#define MAX77663_REG_LDO4 0x2B
+#define MAX77663_REG_LDO4_DATA (0xE000 | MAX77663_REG_LDO4)
+
+#define MAX77663_REG_GPIO1 0x37
+#define MAX77663_REG_GPIO1_DATA (0x0800 | MAX77663_REG_GPIO1)
+#define MAX77663_REG_GPIO4 0x3A
+#define MAX77663_REG_GPIO4_DATA (0x0100 | MAX77663_REG_GPIO4)
+
+void pmic_enable_cpu_vdd(void)
+{
+ /* Set VDD_CORE to 1.200V. */
+ tegra_i2c_ll_write(MAX77663_I2C_ADDR, MAX77663_REG_SD1_DATA);
+
+ udelay(1000);
+
+ /* Bring up VDD_CPU to 1.0125V. */
+ tegra_i2c_ll_write(MAX77663_I2C_ADDR, MAX77663_REG_SD0_DATA);
+ udelay(1000);
+
+ /* Bring up VDD_RTC to 1.200V. */
+ tegra_i2c_ll_write(MAX77663_I2C_ADDR, MAX77663_REG_LDO4_DATA);
+ udelay(10 * 1000);
+
+ /* Set GPIO4 and GPIO1 states */
+ tegra_i2c_ll_write(MAX77663_I2C_ADDR, MAX77663_REG_GPIO4_DATA);
+ tegra_i2c_ll_write(MAX77663_I2C_ADDR, MAX77663_REG_GPIO1_DATA);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2022
+ * Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <env.h>
+#include <fdt_support.h>
+#include <i2c.h>
+#include <log.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/fuse.h>
+#include <asm/gpio.h>
+#include <linux/delay.h>
+#include "pinmux-config-x3.h"
+
+#define MAX77663_I2C_ADDR 0x1C
+
+#define MAX77663_REG_SD2 0x18
+#define MAX77663_REG_LDO2 0x27
+#define MAX77663_REG_LDO3 0x29
+#define MAX77663_REG_LDO5 0x2D
+#define MAX77663_REG_ONOFF_CFG1 0x41
+#define ONOFF_PWR_OFF BIT(1)
+
+#ifdef CONFIG_CMD_POWEROFF
+int do_poweroff(struct cmd_tbl *cmdtp, int flag,
+ int argc, char *const argv[])
+{
+ struct udevice *dev;
+ uchar data_buffer[1];
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(0, MAX77663_I2C_ADDR, 1, &dev);
+ if (ret) {
+ log_debug("cannot find PMIC I2C chip\n");
+ return 0;
+ }
+
+ ret = dm_i2c_read(dev, MAX77663_REG_ONOFF_CFG1, data_buffer, 1);
+ if (ret)
+ return ret;
+
+ data_buffer[0] |= ONOFF_PWR_OFF;
+
+ ret = dm_i2c_write(dev, MAX77663_REG_ONOFF_CFG1, data_buffer, 1);
+ if (ret)
+ return ret;
+
+ /* wait some time and then print error */
+ mdelay(5000);
+
+ printf("Failed to power off!!!\n");
+ return 1;
+}
+#endif
+
+/*
+ * Routine: pinmux_init
+ * Description: Do individual peripheral pinmux configs
+ */
+void pinmux_init(void)
+{
+ pinmux_config_pingrp_table(tegra3_x3_pinmux_common,
+ ARRAY_SIZE(tegra3_x3_pinmux_common));
+
+#ifdef CONFIG_DEVICE_P880
+ pinmux_config_pingrp_table(tegra3_p880_pinmux,
+ ARRAY_SIZE(tegra3_p880_pinmux));
+#endif
+
+#ifdef CONFIG_DEVICE_P895
+ pinmux_config_pingrp_table(tegra3_p895_pinmux,
+ ARRAY_SIZE(tegra3_p895_pinmux));
+#endif
+}
+
+#ifdef CONFIG_MMC_SDHCI_TEGRA
+static void max77663_voltage_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(0, MAX77663_I2C_ADDR, 1, &dev);
+ if (ret) {
+ log_debug("cannot find PMIC I2C chip\n");
+ return;
+ }
+
+ /* 0x60 for 1.8v, bit7:0 = voltage */
+ ret = dm_i2c_reg_write(dev, MAX77663_REG_SD2, 0x60);
+ if (ret)
+ log_debug("vdd_1v8_vio set failed: %d\n", ret);
+
+ /* 0xF2 for 3.30v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
+ ret = dm_i2c_reg_write(dev, MAX77663_REG_LDO2, 0xF2);
+ if (ret)
+ log_debug("avdd_usb set failed: %d\n", ret);
+
+ /* 0xEC for 3.00v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
+ ret = dm_i2c_reg_write(dev, MAX77663_REG_LDO3, 0xEC);
+ if (ret)
+ log_debug("vdd_usd set failed: %d\n", ret);
+
+ /* 0xE9 for 2.85v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
+ ret = dm_i2c_reg_write(dev, MAX77663_REG_LDO5, 0xE9);
+ if (ret)
+ log_debug("vcore_emmc set failed: %d\n", ret);
+}
+
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the MMC muxes, power rails, etc.
+ */
+void pin_mux_mmc(void)
+{
+ /* Bring up uSD and eMMC power */
+ max77663_voltage_init();
+}
+#endif /* MMC */
+
+int nvidia_board_init(void)
+{
+ /* Set up panel bridge clocks */
+ clock_start_periph_pll(PERIPH_ID_EXTPERIPH3, CLOCK_ID_PERIPH,
+ 24 * 1000000);
+ clock_external_output(3);
+
+ return 0;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+ /* First 3 bytes refer to LG vendor */
+ u8 btmacaddr[6] = { 0x00, 0x00, 0x00, 0xD0, 0xC9, 0x88 };
+
+ /* Generate device 3 bytes based on chip sd */
+ u64 bt_device = tegra_chip_uid() >> 24ull;
+
+ btmacaddr[0] = (bt_device >> 1 & 0x0F) |
+ (bt_device >> 5 & 0xF0);
+ btmacaddr[1] = (bt_device >> 11 & 0x0F) |
+ (bt_device >> 17 & 0xF0);
+ btmacaddr[2] = (bt_device >> 23 & 0x0F) |
+ (bt_device >> 29 & 0xF0);
+
+ /* Set BT MAC address */
+ fdt_find_and_setprop(blob, "/serial@70006200/bluetooth",
+ "local-bd-address", btmacaddr, 6, 1);
+
+ /* Remove TrustZone nodes */
+ fdt_del_node_and_alias(blob, "/firmware");
+ fdt_del_node_and_alias(blob, "/reserved-memory/trustzone@bfe00000");
+
+ return 0;
+}
+#endif
+
+void nvidia_board_late_init(void)
+{
+ char serialno_str[17];
+
+ /* Set chip id as serialno */
+ sprintf(serialno_str, "%016llx", tegra_chip_uid());
+ env_set("serial#", serialno_str);
+ env_set("platform", "Tegra 3 T30");
+}
--- /dev/null
+CONFIG_ARM=y
+CONFIG_SYS_L2CACHE_OFF=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_SUPPORT_PASSING_ATAGS=y
+CONFIG_CMDLINE_TAG=y
+CONFIG_INITRD_TAG=y
+CONFIG_TEXT_BASE=0x80110000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SIZE=0x3000
+CONFIG_ENV_OFFSET=0xFFFFD000
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-htc-endeavoru"
+CONFIG_SPL_TEXT_BASE=0x80108000
+CONFIG_SYS_PROMPT="Tegra30 (Endeavoru) # "
+CONFIG_SPL_STACK=0x800ffffc
+CONFIG_TEGRA30=y
+CONFIG_TARGET_ENDEAVORU=y
+CONFIG_CMD_EBTUPDATE=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_BOOTDELAY=0
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_KEYED_CTRLC=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; run bootcmd_mmc0; poweroff;"
+CONFIG_SPL_FOOTPRINT_LIMIT=y
+CONFIG_SPL_MAX_FOOTPRINT=0x8000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
+CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000
+CONFIG_SYS_SPL_MALLOC_SIZE=0x10000
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=2084
+CONFIG_CMD_BOOTMENU=y
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_GPT_RENAME=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_UMS_ABORT_KEYED=y
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PAUSE=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_ENV_OVERWRITE=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_PART=2
+CONFIG_SPL_DM=y
+CONFIG_BUTTON=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x91000000
+CONFIG_FASTBOOT_BUF_SIZE=0x10000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_SYS_I2C_TEGRA=y
+CONFIG_BUTTON_KEYBOARD=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_PWM_TEGRA=y
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="HTC"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0bb4
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0c02
+CONFIG_CI_UDC=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_LOGO is not set
+CONFIG_VIDEO_LCD_ENDEAVORU=y
+CONFIG_VIDEO_DSI_TEGRA30=y
+CONFIG_TEGRA_BACKLIGHT_PWM=y
+# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
--- /dev/null
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-nexus7-grouper-E1565"
+CONFIG_GROUPER_MAX77663=y
--- /dev/null
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-nexus7-grouper-PM269"
+CONFIG_GROUPER_TPS65911=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_SYS_L2CACHE_OFF=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_SUPPORT_PASSING_ATAGS=y
+CONFIG_CMDLINE_TAG=y
+CONFIG_INITRD_TAG=y
+CONFIG_TEXT_BASE=0x80110000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SIZE=0x3000
+CONFIG_ENV_OFFSET=0xFFFFD000
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-nexus7-grouper-E1565"
+CONFIG_SPL_TEXT_BASE=0x80108000
+CONFIG_SYS_PROMPT="Tegra30 (Grouper) # "
+CONFIG_SPL_STACK=0x800ffffc
+CONFIG_TEGRA30=y
+CONFIG_TARGET_GROUPER=y
+CONFIG_CMD_EBTUPDATE=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_BOOTDELAY=0
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_KEYED_CTRLC=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; run bootcmd_mmc0; poweroff;"
+CONFIG_SPL_FOOTPRINT_LIMIT=y
+CONFIG_SPL_MAX_FOOTPRINT=0x8000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
+CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000
+CONFIG_SYS_SPL_MALLOC_SIZE=0x10000
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=2084
+CONFIG_CMD_BOOTMENU=y
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_GPT_RENAME=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_UMS_ABORT_KEYED=y
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PAUSE=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_ENV_OVERWRITE=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_PART=2
+CONFIG_SPL_DM=y
+CONFIG_BUTTON=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x91000000
+CONFIG_FASTBOOT_BUF_SIZE=0x10000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_GPIO_HOG=y
+CONFIG_SYS_I2C_TEGRA=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_GPIO=y
+CONFIG_BUTTON_KEYBOARD=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_PWM_TEGRA=y
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="ASUS Google"
+CONFIG_USB_GADGET_VENDOR_NUM=0x18d1
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4e41
+CONFIG_CI_UDC=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_LOGO is not set
+CONFIG_VIDEO_TEGRA20=y
+# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
--- /dev/null
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-p1801-t"
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4cb0
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
+CONFIG_CMD_POWEROFF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
+CONFIG_CMD_POWEROFF=y
CONFIG_CMD_SPI=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_PREFER_SERVERIP=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
+CONFIG_CMD_POWEROFF=y
CONFIG_CMD_SPI=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_PREFER_SERVERIP=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
+CONFIG_CMD_POWEROFF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
--- /dev/null
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-lg-p880"
+CONFIG_DEVICE_P880=y
+CONFIG_SYS_PROMPT="Tegra30 (P880) # "
+CONFIG_VIDEO_LCD_RENESAS_R69328=y
--- /dev/null
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-lg-p895"
+CONFIG_DEVICE_P895=y
+CONFIG_SYS_PROMPT="Tegra30 (P895) # "
+CONFIG_VIDEO_LCD_RENESAS_R61307=y
--- /dev/null
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf201"
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4d00
--- /dev/null
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf300t"
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4d00
--- /dev/null
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf300tg"
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4c80
--- /dev/null
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf300tl"
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4d00
--- /dev/null
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf600t"
+CONFIG_TRANSFORMER_SPI_BOOT=y
+CONFIG_BOOTCOMMAND="setenv gpio_button 222; if run check_button; then poweroff; fi; setenv gpio_button 132; if run check_button; then echo Starting SPI flash update ...; run update_spi; fi; run bootcmd_mmc1; run bootcmd_mmc0; poweroff;"
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4d00
--- /dev/null
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf700t"
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4c90
--- /dev/null
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-nexus7-tilapia-E1565"
+CONFIG_GROUPER_MAX77663=y
+CONFIG_SYS_PROMPT="Tegra30 (Tilapia) # "
--- /dev/null
+CONFIG_ARM=y
+CONFIG_SYS_L2CACHE_OFF=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_SUPPORT_PASSING_ATAGS=y
+CONFIG_CMDLINE_TAG=y
+CONFIG_INITRD_TAG=y
+CONFIG_TEXT_BASE=0x80110000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SIZE=0x3000
+CONFIG_ENV_OFFSET=0xFFFFD000
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf201"
+CONFIG_SPL_TEXT_BASE=0x80108000
+CONFIG_SYS_PROMPT="Tegra30 (Transformer) # "
+CONFIG_SPL_STACK=0x800ffffc
+CONFIG_TEGRA30=y
+CONFIG_TARGET_TRANSFORMER_T30=y
+CONFIG_CMD_EBTUPDATE=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_BOOTDELAY=0
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_KEYED_CTRLC=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="setenv gpio_button 150; if run check_button; then poweroff; fi; setenv gpio_button 131; if run check_button; then bootmenu; fi; run bootcmd_mmc1; run bootcmd_mmc0; poweroff;"
+CONFIG_SPL_FOOTPRINT_LIMIT=y
+CONFIG_SPL_MAX_FOOTPRINT=0x8000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
+CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000
+CONFIG_SYS_SPL_MALLOC_SIZE=0x10000
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=2084
+CONFIG_CMD_BOOTMENU=y
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_GPT_RENAME=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_UMS_ABORT_KEYED=y
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PAUSE=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_ENV_OVERWRITE=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_PART=2
+CONFIG_SPL_DM=y
+CONFIG_BUTTON=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x91000000
+CONFIG_FASTBOOT_BUF_SIZE=0x10000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_GPIO_HOG=y
+CONFIG_SYS_I2C_TEGRA=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_GPIO=y
+CONFIG_BUTTON_KEYBOARD=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_PWM_TEGRA=y
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="ASUS"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0b05
+CONFIG_CI_UDC=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_LOGO is not set
+CONFIG_VIDEO_TEGRA20=y
+# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
--- /dev/null
+CONFIG_ARM=y
+CONFIG_SYS_L2CACHE_OFF=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_SUPPORT_PASSING_ATAGS=y
+CONFIG_CMDLINE_TAG=y
+CONFIG_INITRD_TAG=y
+CONFIG_TEXT_BASE=0x80110000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SIZE=0x3000
+CONFIG_ENV_OFFSET=0xFFFFD000
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-lg-p880"
+CONFIG_SPL_TEXT_BASE=0x80108000
+CONFIG_SYS_PROMPT="Tegra30 (x3) # "
+CONFIG_SPL_STACK=0x800ffffc
+CONFIG_TEGRA30=y
+CONFIG_TARGET_X3_T30=y
+CONFIG_TEGRA_ENABLE_UARTD=y
+CONFIG_CMD_EBTUPDATE=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_BOOTDELAY=0
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_KEYED_CTRLC=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; run bootcmd_mmc1; run bootcmd_mmc0; poweroff;"
+CONFIG_SPL_FOOTPRINT_LIMIT=y
+CONFIG_SPL_MAX_FOOTPRINT=0x8000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
+CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000
+CONFIG_SYS_SPL_MALLOC_SIZE=0x10000
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=2084
+CONFIG_CMD_BOOTMENU=y
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_GPT_RENAME=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_UMS_ABORT_KEYED=y
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PAUSE=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_ENV_OVERWRITE=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_PART=2
+CONFIG_SPL_DM=y
+CONFIG_BUTTON=y
+CONFIG_EXTCON=y
+CONFIG_EXTCON_MAX14526=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x91000000
+CONFIG_FASTBOOT_BUF_SIZE=0x10000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_SYS_I2C_TEGRA=y
+CONFIG_BUTTON_KEYBOARD=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_PWM_TEGRA=y
+CONFIG_SYS_NS16550=y
+CONFIG_TEGRA20_SLINK=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="LG"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1004
+CONFIG_USB_GADGET_PRODUCT_NUM=0x7100
+CONFIG_CI_UDC=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_LOGO is not set
+CONFIG_BACKLIGHT_LM3533=y
+CONFIG_VIDEO_BRIDGE_SOLOMON_SSD2825=y
+CONFIG_VIDEO_TEGRA20=y
+# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for the ASUS/Google Nexus 7 (2012)
+=========================================
+
+``DISCLAMER!`` Moving your ASUS/Google Nexus 7 (2012) to use
+U-Boot assumes replacement of the vendor ASUS bootloader. Vendor
+android firmwares will no longer be able to run on the device.
+This replacement IS reversible.
+
+Quick Start
+-----------
+
+- Build U-Boot
+- Pack U-Boot into repart-block
+- Flash repart-block into the eMMC
+- Boot
+- Self Upgrading
+
+Build U-Boot
+------------
+
+Device support is implemented by applying config fragment to a generic
+board defconfig. Valid fragments are ``grouper_E1565.config``,
+``grouper_PM269.config`` and ``tilapia.config``.
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=arm-linux-gnueabi-
+ $ make grouper_common_defconfig grouper_E1565.config # For maxim based grouper
+ $ make
+
+After the build succeeds, you will obtain the final ``u-boot-dtb-tegra.bin``
+image, ready for flashing (but check the next section for additional
+adjustments).
+
+Pack U-Boot into repar-block
+----------------------------
+
+``DISCLAMER!`` All questions related to re-crypt work should be asked
+in re-crypt repo issues. NOT HERE!
+
+re-crypt is a small script which packs ``u-boot-dtb-tegra.bin`` in
+form usable by device. This process is required only on the first
+installation or to recover the device in case of a failed update.
+You need to know your tablet's individual SBK to continue.
+
+.. code-block:: bash
+
+ $ git clone https://github.com/clamor-s/re-crypt.git
+ $ cd re-crypt # place your u-boot-dtb-regra.bin here
+ $ ./re-crypt.sh -d grouper -k deadbeefdeadc0dedeadd00dfee1dead
+
+Script will produce you a ``repart-block.bin`` ready to flash.
+
+Flash repart-block into the eMMC
+--------------------------------
+
+``DISCLAMER!`` All questions related to NvFlash should be asked
+in the proper place. NOT HERE! Flashing repart-block will erase
+all your eMMC, so make a backup before!
+
+``repart-block.bin`` contains BCT and bootloader in encrypted state
+in form which can just be written RAW at the start of eMMC.
+
+.. code-block:: bash
+
+ $ wheelie --blob blob.bin
+ $ nvflash --resume --rawdevicewrite 0 1024 repart-block.bin
+
+Boot
+----
+
+After flashing ``repart-block.bin`` the device should reboot and turn
+itself off. This is normal behavior if no boot configuration is
+found.
+
+To boot Linux, U-Boot will look for an ``extlinux.conf`` configuration
+on eMMC. Additionally if Volume Down button is pressed while booting
+device will enter bootmenu. Bootmenu contains entries to mount eMMC as
+mass storage, fastboot, reboot, reboot RCM, poweroff, enter U-Boot
+console and update bootloader (check next chapter).
+
+Flashing ``repart-block.bin`` eliminates vendor restriction on eMMC
+and allows the user to use/partition it in any way the user desires.
+
+Self Upgrading
+--------------
+
+Place your ``u-boot-dtb-tegra.bin`` on the first partition of the
+eMMC (using ability of u-boot to mount it). Enter bootmenu, choose
+update bootloader option with Power button and U-Boot should update
+itself. Once the process is completed, U-Boot will ask to press any
+button to reboot.
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0+
+
+ASUS
+====
+
+.. toctree::
+ :maxdepth: 2
+
+ grouper_common
+ transformer_t30
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for the ASUS Transformer device family
+=============================================
+
+``DISCLAMER!`` Moving your ASUS Transformer to use U-Boot
+assumes replacement of the vendor ASUS bootloader. Vendor
+android firmwares will no longer be able to run on the device.
+This replacement IS reversible.
+
+Quick Start
+-----------
+
+- Build U-Boot
+- Pack U-Boot into repart-block
+- Flash repart-block into the eMMC
+- Flash repart-block into TF600T SPI flash
+- Boot
+- Self Upgrading
+
+Build U-Boot
+------------
+
+Device support is implemented by applying config fragment
+to a generic board defconfig. Valid fragments are ``tf201.config``,
+``tf300t.config``, ``tf300tg.config``, ``tf300tl.config``,
+``tf700t.config``, ``tf600t.config`` and ``p1801-t.config``.
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=arm-linux-gnueabi-
+ $ make transformer_t30_defconfig tf201.config # For TF201
+ $ make
+
+After the build succeeds, you will obtain the final ``u-boot-dtb-tegra.bin``
+image, ready for flashing (but check the next section for additional
+adjustments).
+
+Pack U-Boot into repar-block
+----------------------------
+
+``DISCLAMER!`` All questions related to re-crypt work should be asked
+in re-crypt repo issues. NOT HERE!
+
+re-crypt is a small script which packs ``u-boot-dtb-tegra.bin`` in
+form usable by device. This process is required only on the first
+installation or to recover the device in case of a failed update.
+You need to know your tablet's individual SBK to continue.
+
+.. code-block:: bash
+
+ $ git clone https://github.com/clamor-s/re-crypt.git
+ $ cd re-crypt # place your u-boot-dtb-regra.bin here
+ $ ./re-crypt.sh -d tf201 -k deadbeefdeadc0dedeadd00dfee1dead
+
+Script will produce you a `repart-block.bin` ready to flash.
+
+Flash repart-block into the eMMC
+--------------------------------
+
+``DISCLAMER!`` All questions related to NvFlash should be asked
+in the proper place. NOT HERE! Flashing repart-block will erase
+all your eMMC, so make a backup before!
+
+``repart-block.bin`` contains BCT and bootloader in encrypted state
+in form which can just be written RAW at the start of eMMC.
+
+.. code-block:: bash
+
+ $ wheelie --blob blob.bin
+ $ nvflash --resume --rawdevicewrite 0 1024 repart-block.bin
+
+Flash repart-block into TF600T SPI flash
+----------------------------------------
+
+Unlike other transformers TF600T uses separate 4 MB SPI flash which
+contains all data required for boot. It is flashed from within u-boot
+itself preloaded into RAM using fusee gelee. After creating your
+``repart-block.bin`` you have to place it on a 1st partition of microSD
+card formated in fat. Then insert this microSD card into your tablet
+and boot it using fusee gelee and u-boot which was included into
+repart-block.bin, while booting you must hold volume down button.
+Process should take less then a minute, if everything goes correct,
+on microSD will appear ``spi-flash-backup.bin`` file, which is dump of
+your spi flash content and can be used to restore UEFI, do not loose it,
+tablet will power itself off.
+
+Self-updating of u-boot is performed by placing ``u-boot-dtb-tegra.bin``
+on 1st partition of microSD, inserting it into tablet and booting with
+pressed volume down button.
+
+Boot
+----
+
+After flashing ``repart-block.bin`` the device should reboot and turn
+itself off. This is normal behavior if no boot configuration is
+found.
+
+To boot Linux, U-Boot will look for an ``extlinux.conf`` on MicroSD
+and then on eMMC. Additionally if Volume Down button is pressed
+while booting device will enter bootmenu. Bootmenu contains entries
+to mount MicroSD and eMMC as mass storage, fastboot, reboot, reboot
+RCM, poweroff, enter U-Boot console and update bootloader (check next
+chapter).
+
+Flashing ``repart-block.bin`` eliminates vendor restriction on eMMC
+and allows the user to use/partition it in any way the user desires.
+
+Self Upgrading
+--------------
+
+Place your ``u-boot-dtb-tegra.bin`` on the first partition of the
+MicroSD card and insert it into the tablet. Enter bootmenu, choose
+update bootloader option with Power button and U-Boot should update
+itself. Once the process is completed, U-Boot will ask to press any
+button to reboot.
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for the HTC One X (endeavoru)
+====================================
+
+``DISCLAMER!`` Moving your HTC ONe X to use U-Boot assumes
+replacement of the vendor hboot. Vendor android firmwares
+will no longer be able to run on the device.
+This replacement IS reversible.
+
+Quick Start
+-----------
+
+- Build U-Boot
+- Pack U-Boot into repart-block
+- Flash repart-block into the eMMC
+- Boot
+- Self Upgrading
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=arm-linux-gnueabi-
+ $ make endeavoru_defconfig
+ $ make
+
+After the build succeeds, you will obtain the final ``u-boot-dtb-tegra.bin``
+image, ready for flashing (but check the next section for additional
+adjustments).
+
+Pack U-Boot into repar-block
+----------------------------
+
+``DISCLAMER!`` All questions related to re-crypt work should be
+asked in re-crypt repo issues. NOT HERE!
+
+re-crypt is a small script which packs ``u-boot-dtb-tegra.bin`` in
+form usable by device. This process is required only on the first
+installation or to recover the device in case of a failed update.
+
+.. code-block:: bash
+
+ $ git clone https://github.com/clamor-s/re-crypt.git
+ $ cd re-crypt # place your u-boot-dtb-regra.bin here
+ $ ./re-crypt.sh -d endeavoru
+
+Script will produce you a ``repart-block.bin`` ready to flash.
+
+Flash repart-block into the eMMC
+--------------------------------
+
+``DISCLAMER!`` All questions related to NvFlash should be asked
+in the proper place. NOT HERE! Flashing repart-block will erase
+all your eMMC, so make a backup before!
+
+``repart-block.bin`` contains BCT and bootloader in encrypted state
+in form which can just be written RAW at the start of eMMC.
+
+.. code-block:: bash
+
+ $ wheelie --blob blob.bin
+ $ nvflash --resume --rawdevicewrite 0 1024 repart-block.bin
+
+Boot
+----
+
+After flashing ``repart-block.bin`` the device should reboot and turn
+itself off. This is normal behavior if no boot configuration is
+found.
+
+To boot Linux, U-Boot will look for an ``extlinux.conf`` configuration
+on eMMC. Additionally if Volume Down button is pressed while booting
+device will enter bootmenu. Bootmenu contains entries to mount eMMC as
+mass storage, fastboot, reboot, reboot RCM, poweroff, enter U-Boot
+console and update bootloader (check next chapter).
+
+Flashing ``repart-block.bin`` eliminates vendor restriction on eMMC
+and allows the user to use/partition it in any way the user desires.
+
+Self Upgrading
+--------------
+
+Place your ``u-boot-dtb-tegra.bin`` on the first partition of the
+eMMC (using ability of u-boot to mount it). Enter bootmenu, choose
+update bootloader option with Power button and U-Boot should update
+itself. Once the process is completed, U-Boot will ask to press any
+button to reboot.
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0+
+
+HTC
+===
+
+.. toctree::
+ :maxdepth: 2
+
+ endeavoru
anbernic/index
apple/index
armltd/index
+ asus/index
atmel/index
beacon/index
broadcom/index
gateworks/index
google/index
highbank/index
+ htc/index
intel/index
kontron/index
+ lg/index
mediatek/index
microchip/index
nokia/index
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0+
+
+LG
+==
+
+.. toctree::
+ :maxdepth: 2
+
+ x3_t30
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for the LG X3 T30 device family
+======================================
+
+``DISCLAMER!`` Moving your LG P880 or P895 to use U-Boot
+assumes replacement of the vendor LG bootloader. Vendor
+android firmwares will no longer be able to run on the
+device. This replacement IS reversible.
+
+Quick Start
+-----------
+
+- Build U-Boot
+- Pack U-Boot into repart-block
+- Flash repart-block into the eMMC
+- Boot
+- Self Upgrading
+
+Build U-Boot
+------------
+
+Device support is implemented by applying config fragment to a generic
+board defconfig. Valid fragments are ``p880.config`` and ``p895.config``.
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=arm-linux-gnueabi-
+ $ make x3_t30_defconfig p895.config # For LG Optimus Vu
+ $ make
+
+After the build succeeds, you will obtain the final ``u-boot-dtb-tegra.bin``
+image, ready for flashing (but check the next section for additional
+adjustments).
+
+Pack U-Boot into repar-block
+----------------------------
+
+``DISCLAMER!`` All questions related to re-crypt work should be
+asked in re-crypt repo issues. NOT HERE!
+
+re-crypt is a small script which packs ``u-boot-dtb-tegra.bin`` in
+form usable by device. This process is required only on the first
+installation or to recover the device in case of a failed update.
+
+.. code-block:: bash
+
+ $ git clone https://github.com/clamor-s/re-crypt.git
+ $ cd re-crypt # place your u-boot-dtb-regra.bin here
+ $ ./re-crypt.sh -d p895
+
+Script will produce you a ``repart-block.bin`` ready to flash.
+
+Flash repart-block into the eMMC
+--------------------------------
+
+``DISCLAMER!`` All questions related to NvFlash should be asked
+in the proper place. NOT HERE! Flashing repart-block will erase
+all your eMMC, so make a backup before!
+
+``repart-block.bin`` contains BCT and bootloader in encrypted state
+in form which can just be written RAW at the start of eMMC.
+
+.. code-block:: bash
+
+ $ wheelie --blob blob.bin
+ $ nvflash --resume --rawdevicewrite 0 1024 repart-block.bin
+
+Boot
+----
+
+After flashing ``repart-block.bin`` the device should reboot and turn
+itself off. This is normal behavior if no boot configuration is
+found.
+
+To boot Linux, U-Boot will look for an ``extlinux.conf`` on MicroSD
+and then on eMMC. Additionally if Volume Down button is pressed
+while booting device will enter bootmenu. Bootmenu contains entries
+to mount MicroSD and eMMC as mass storage, fastboot, reboot, reboot
+RCM, poweroff, enter U-Boot console and update bootloader (check next
+chapter).
+
+Flashing ``repart-block.bin`` eliminates vendor restriction on eMMC
+and allows the user to use/partition it in any way the user desires.
+
+Self Upgrading
+--------------
+
+Place your ``u-boot-dtb-tegra.bin`` on the first partition of the
+eMMC (using ability of u-boot to mount it). Enter bootmenu, choose
+update bootloader option with Power button and U-Boot should update
+itself. Once the process is completed, U-Boot will ask to press any
+button to reboot.
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2010,2012
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2022
+ * Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+#include "tegra30-common.h"
+
+/* High-level configuration options */
+#define CFG_TEGRA_BOARD_STRING "HTC One X"
+
+#define ENDEAVORU_FLASH_UBOOT \
+ "flash_uboot=echo Preparing RAM;" \
+ "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
+ "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
+ "echo Reading BCT;" \
+ "mmc dev 0 1;" \
+ "mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
+ "echo Reading bootloader;" \
+ "if load mmc 0:1 ${ramdisk_addr_r} ${bootloader_file};" \
+ "then echo Calculating bootloader size;" \
+ "size mmc 0:1 ${bootloader_file};" \
+ "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
+ "echo Writing bootloader to eMMC;" \
+ "mmc dev 0 1;" \
+ "mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
+ "mmc dev 0 2;" \
+ "mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
+ "echo Bootloader written successfully;" \
+ "pause 'Press ANY key to reboot device...'; reset;" \
+ "else echo Reading bootloader failed;" \
+ "pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
+
+#define ENDEAVORU_BOOTMENU \
+ ENDEAVORU_FLASH_UBOOT \
+ "bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
+ "bootmenu_1=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
+ "bootmenu_2=update bootloader=run flash_uboot\0" \
+ "bootmenu_3=reboot RCM=enterrcm\0" \
+ "bootmenu_4=reboot=reset\0" \
+ "bootmenu_5=power off=poweroff\0" \
+ "bootmenu_delay=-1\0"
+
+#define BOARD_EXTRA_ENV_SETTINGS \
+ "boot_block_size_r=0x200000\0" \
+ "boot_block_size=0x1000\0" \
+ "bootloader_file=u-boot-dtb-tegra.bin\0" \
+ "check_button=gpio input 179; test $? -eq 0\0" \
+ "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
+ ENDEAVORU_BOOTMENU
+
+/* Board-specific serial config */
+#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+#include "tegra30-common.h"
+
+/* High-level configuration options */
+#define CFG_TEGRA_BOARD_STRING "ASUS Google Nexus 7 (2012)"
+
+#define GROUPER_FLASH_UBOOT \
+ "flash_uboot=echo Preparing RAM;" \
+ "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
+ "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
+ "echo Reading BCT;" \
+ "mmc dev 0 1;" \
+ "mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
+ "echo Reading bootloader;" \
+ "if load mmc 0:1 ${ramdisk_addr_r} ${bootloader_file};" \
+ "then echo Calculating bootloader size;" \
+ "size mmc 0:1 ${bootloader_file};" \
+ "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
+ "echo Writing bootloader to eMMC;" \
+ "mmc dev 0 1;" \
+ "mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
+ "mmc dev 0 2;" \
+ "mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
+ "echo Bootloader written successfully;" \
+ "pause 'Press ANY key to reboot device...'; reset;" \
+ "else echo Reading bootloader failed;" \
+ "pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
+
+#define GROUPER_BOOTMENU \
+ GROUPER_FLASH_UBOOT \
+ "bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
+ "bootmenu_1=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
+ "bootmenu_2=update bootloader=run flash_uboot\0" \
+ "bootmenu_3=reboot RCM=enterrcm\0" \
+ "bootmenu_4=reboot=reset\0" \
+ "bootmenu_5=power off=poweroff\0" \
+ "bootmenu_delay=-1\0"
+
+#define BOARD_EXTRA_ENV_SETTINGS \
+ "boot_block_size_r=0x200000\0" \
+ "boot_block_size=0x1000\0" \
+ "bootloader_file=u-boot-dtb-tegra.bin\0" \
+ "check_button=gpio input 131; test $? -eq 0;\0" \
+ "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
+ GROUPER_BOOTMENU
+
+/* Board-specific serial config */
+#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
#define __TEGRA_COMMON_POST_H
#if IS_ENABLED(CONFIG_CMD_USB)
-# define BOOT_TARGET_USB(func) func(USB, usb, 0)
+#define BOOT_TARGET_USB(func) func(USB, usb, 0)
#else
-# define BOOT_TARGET_USB(func)
+#define BOOT_TARGET_USB(func)
+#endif
+
+#if CONFIG_IS_ENABLED(CMD_DHCP) && CONFIG_IS_ENABLED(CMD_PXE)
+#define BOOT_TARGET_PXE(func) func(PXE, pxe, na)
+#else
+#define BOOT_TARGET_PXE(func)
+#endif
+
+#if CONFIG_IS_ENABLED(CMD_DHCP)
+#define BOOT_TARGET_DHCP(func) func(DHCP, dhcp, na)
+#else
+#define BOOT_TARGET_DHCP(func)
#endif
#ifndef BOOT_TARGET_DEVICES
func(MMC, mmc, 1) \
func(MMC, mmc, 0) \
BOOT_TARGET_USB(func) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na)
+ BOOT_TARGET_PXE(func) \
+ BOOT_TARGET_DHCP(func)
#endif
#include <config_distro_bootcmd.h>
#define STDIN_KBD_USB ""
#endif
+#ifdef CONFIG_BUTTON_KEYBOARD
+#define STDIN_BTN_KBD ",button-kbd"
+#else
+#define STDIN_BTN_KBD ""
+#endif
+
#ifdef CONFIG_VIDEO
#define STDOUT_VIDEO ",vidconsole"
#else
#endif
#define TEGRA_DEVICE_SETTINGS \
- "stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB STDOUT_CROS_EC "\0" \
+ "stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB STDOUT_CROS_EC STDIN_BTN_KBD "\0" \
"stdout=serial" STDOUT_VIDEO "\0" \
"stderr=serial" STDOUT_VIDEO "\0" \
""
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2022, Svyatoslav Ryhel <clamor95@gmail.com>.
+ */
+
+#ifndef __TRANSFORMER_COMMON_H
+#define __TRANSFORMER_COMMON_H
+
+/* High-level configuration options */
+#define CFG_TEGRA_BOARD_STRING "ASUS Transformer"
+
+#define TRANSFORMER_FLASH_UBOOT \
+ "flash_uboot=echo Preparing RAM;" \
+ "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
+ "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
+ "echo Reading BCT;" \
+ "mmc dev 0 1;" \
+ "mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
+ "echo Reading bootloader;" \
+ "if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};" \
+ "then echo Calculating bootloader size;" \
+ "size mmc 1:1 ${bootloader_file};" \
+ "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
+ "echo Writing bootloader to eMMC;" \
+ "mmc dev 0 1;" \
+ "mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
+ "mmc dev 0 2;" \
+ "mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
+ "echo Bootloader written successfully;" \
+ "pause 'Press ANY key to reboot device...'; reset;" \
+ "else echo Reading bootloader failed;" \
+ "pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
+
+#define TRANSFORMER_FLASH_SPI \
+ "update_spi=sf probe 0:1;" \
+ "echo Dumping current SPI flash content ...;" \
+ "sf read ${kernel_addr_r} 0x0 ${spi_size};" \
+ "if fatwrite mmc 1:1 ${kernel_addr_r} spi-flash-backup.bin ${spi_size};" \
+ "then echo SPI flash content was successfully written into spi-flash-backup.bin;" \
+ "echo Reading SPI flash binary;" \
+ "if load mmc 1:1 ${kernel_addr_r} repart-block.bin;" \
+ "then echo Writing bootloader into SPI flash;" \
+ "sf probe 0:1;" \
+ "sf update ${kernel_addr_r} 0x0 ${spi_size};" \
+ "poweroff;" \
+ "else echo Preparing RAM;" \
+ "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
+ "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
+ "echo Reading BCT;" \
+ "sf read ${kernel_addr_r} 0x0 ${boot_block_size_r};" \
+ "echo Reading bootloader;" \
+ "if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};" \
+ "then echo Calculating bootloader size;" \
+ "size mmc 1:1 ${bootloader_file};" \
+ "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
+ "echo Writing bootloader into SPI flash;" \
+ "sf probe 0:1;" \
+ "sf update ${kernel_addr_r} 0x0 ${boot_block_size_r};" \
+ "sf update ${ramdisk_addr_r} ${boot_block_size_r} ${boot_block_size_r};" \
+ "echo Bootloader written successfully; poweroff;" \
+ "else echo Reading bootloader failed;" \
+ "poweroff; fi;" \
+ "fi;" \
+ "else echo SPI flash backup FAILED! Aborting ...;" \
+ "poweroff; fi\0"
+
+#define TRANSFORMER_REFRESH_USB \
+ "refresh_usb=usb start; usb reset; usb tree; usb info;" \
+ "pause 'Press ANY key to return to bootmenu...'; bootmenu\0"
+
+#define TRANSFORMER_BOOTMENU \
+ TRANSFORMER_FLASH_UBOOT \
+ TRANSFORMER_FLASH_SPI \
+ TRANSFORMER_REFRESH_USB \
+ "bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
+ "bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
+ "bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
+ "bootmenu_3=update bootloader=run flash_uboot\0" \
+ "bootmenu_4=refresh USB=run refresh_usb\0" \
+ "bootmenu_5=reboot RCM=enterrcm\0" \
+ "bootmenu_6=reboot=reset\0" \
+ "bootmenu_7=power off=poweroff\0" \
+ "bootmenu_delay=-1\0"
+
+#define BOARD_EXTRA_ENV_SETTINGS \
+ "spi_size=0x400000\0" \
+ "boot_block_size_r=0x200000\0" \
+ "boot_block_size=0x1000\0" \
+ "check_button=gpio input ${gpio_button}; test $? -eq 0;\0" \
+ "bootloader_file=u-boot-dtb-tegra.bin\0" \
+ "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
+ TRANSFORMER_BOOTMENU
+
+#endif /* __CONFIG_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2010,2012
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2022
+ * Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+#include "tegra30-common.h"
+#include "transformer-common.h"
+
+/* Board-specific serial config */
+#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2010,2012
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2022
+ * Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+#include "tegra30-common.h"
+
+#define CFG_TEGRA_BOARD_STRING "LG X3 Board"
+
+#ifdef CONFIG_DEVICE_P880
+/* High-level configuration options */
+#undef CFG_TEGRA_BOARD_STRING
+#define CFG_TEGRA_BOARD_STRING "LG Optimus 4X HD"
+#endif
+
+#ifdef CONFIG_DEVICE_P895
+/* High-level configuration options */
+#undef CFG_TEGRA_BOARD_STRING
+#define CFG_TEGRA_BOARD_STRING "LG Optimus Vu"
+#endif
+
+#define X3_FLASH_UBOOT \
+ "flash_uboot=echo Preparing RAM;" \
+ "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
+ "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
+ "echo Reading BCT;" \
+ "mmc dev 0 1;" \
+ "mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
+ "echo Reading bootloader;" \
+ "if load mmc 0:1 ${ramdisk_addr_r} ${bootloader_file};" \
+ "then echo Calculating bootloader size;" \
+ "size mmc 0:1 ${bootloader_file};" \
+ "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
+ "echo Writing bootloader to eMMC;" \
+ "mmc dev 0 1;" \
+ "mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
+ "mmc dev 0 2;" \
+ "mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
+ "echo Bootloader written successfully;" \
+ "pause 'Press ANY key to reboot device...'; reset;" \
+ "else echo Reading bootloader failed;" \
+ "pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
+
+#define X3_BOOTMENU \
+ X3_FLASH_UBOOT \
+ "bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
+ "bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
+ "bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
+ "bootmenu_3=update bootloader=run flash_uboot\0" \
+ "bootmenu_4=reboot RCM=enterrcm\0" \
+ "bootmenu_5=reboot=reset\0" \
+ "bootmenu_6=power off=poweroff\0" \
+ "bootmenu_delay=-1\0"
+
+#define BOARD_EXTRA_ENV_SETTINGS \
+ "boot_block_size_r=0x200000\0" \
+ "boot_block_size=0x1000\0" \
+ "bootloader_file=u-boot-dtb-tegra.bin\0" \
+ "check_button=gpio input 116; test $? -eq 0\0" \
+ "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
+ X3_BOOTMENU
+
+/* Board-specific serial config */
+#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
projects / thirdparty / u-boot.git / commitdiff
