- change_to_directory: if we have specified -@ and cdxattr returns
failure, fail immediately. Fixes bug reported by Joshuah Hurst
<joshhurst@gmail.com>
+
+ 11/12
+ -----
+redir.c
+ - print_redirection: change r_err_and_out (&>) and its append form,
+ r_append_err_and_out (&>>) cases to separate redirection operator
+ from filename by a space, in case we have a process substitution.
+ Fixes bug reported by admn ombres <admn.ombres@gmail.com>
+
+ 11/15
+ -----
+execute_cmd.c
+ - execute_simple_command: don't close process substitution fds until
+ we are finished executing any current shell function. Partial fix
+ for bug reported by John Dawson <john.dawson@gmail.com>
+
+support/shobj-conf
+ - add support for Darwin 13 (Mac OS X 10.9, Mavericks). Based on a
+ report by Ludwig Schwardt <ludwig.schwardt@gmail.com>
--- /dev/null
+Starting bash with the `--posix' command-line option or executing
+`set -o posix' while bash is running will cause bash to conform more
+closely to the Posix.2 standard by changing the behavior to match that
+specified by Posix.2 in areas where the bash default differs.
+
+The following list is what's changed when `posix mode' is in effect:
+
+1. When a command in the hash table no longer exists, bash will re-search
+ $PATH to find the new location. This is also available with
+ `shopt -s checkhash'.
+
+2. The >& redirection does not redirect stdout and stderr.
+
+3. The message printed by the job control code and builtins when a job
+ exits with a non-zero status is `Done(status)'.
+
+4. Reserved words may not be aliased.
+
+5. The Posix.2 PS1 and PS2 expansions of `!' -> history number and
+ `!!' -> `!' are enabled, and parameter expansion is performed on
+ the value regardless of the setting of the `promptvars' option.
+
+6. Interactive comments are enabled by default. (Note that bash has
+ them on by default anyway.)
+
+7. The Posix.2 startup files are executed ($ENV) rather than the normal
+ bash files.
+
+8. Tilde expansion is only performed on assignments preceding a command
+ name, rather than on all assignment statements on the line.
+
+9. The default history file is ~/.sh_history (default value of $HISTFILE).
+
+10. The output of `kill -l' prints all the signal names on a single line,
+ separated by spaces.
+
+11. Non-interactive shells exit if `file' in `. file' is not found.
+
+12. Redirection operators do not perform pathname expansion on the word
+ in the redirection unless the shell is interactive
+
+13. Function names must be valid shell identifiers. That is, they may not
+ contain characters other than letters, digits, and underscores, and
+ may not start with a digit. Declaring a function with an illegal name
+ causes a fatal syntax error in non-interactive shells.
+
+14. Posix.2 `special' builtins are found before shell functions during command
+ lookup.
+
+15. If a Posix.2 special builtin returns an error status, a non-interactive
+ shell exits. The fatal errors are those listed in the POSIX.2 standard,
+ and include things like passing incorrect options, redirection errors,
+ variable assignment errors for assignments preceding the command name,
+ and so on.
+
+16. The environment passed to executed commands is not sorted. Neither is
+ the output of `set'. This is not strictly Posix.2 behavior, but sh
+ does it this way. Ksh does not. It's not necessary to sort the
+ environment; no program should rely on it being sorted.
+
+17. If the `cd' builtin finds a directory to change to using $CDPATH, the
+ value it assigns to $PWD does not contain any symbolic links, as if
+ `cd -P' had been executed.
+
+18. A non-interactive shell exits with an error status if a variable
+ assignment error occurs when no command name follows the assignment
+ statements. A variable assignment error occurs, for example, when
+ trying to assign a value to a read-only variable.
+
+19. A non-interactive shell exits with an error status if the iteration
+ variable in a for statement or the selection variable in a select
+ statement is a read-only variable.
+
+20. Process substitution is not available.
+
+21. Assignment statements preceding POSIX.2 `special' builtins persist in
+ the shell environment after the builtin completes.
+
+There is other Posix.2 behavior that bash does not implement. Specifically:
+
+1. Assignment statements affect the execution environment of all builtins,
+ not just special ones.
--- /dev/null
+This file is set.def, from which is created set.c.
+It implements the "set" and "unset" builtins in Bash.
+
+Copyright (C) 1987, 1989, 1991 Free Software Foundation, Inc.
+
+This file is part of GNU Bash, the Bourne Again SHell.
+
+Bash is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 1, or (at your option) any later
+version.
+
+Bash is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
+
+You should have received a copy of the GNU General Public License along
+with Bash; see the file COPYING. If not, write to the Free Software
+Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+$PRODUCES set.c
+
+#include <stdio.h>
+#include "../shell.h"
+#include "../flags.h"
+
+#include "bashgetopt.h"
+
+extern int interactive;
+extern int noclobber, posixly_correct;
+#if defined (READLINE)
+extern int rl_editing_mode, no_line_editing;
+#endif /* READLINE */
+
+$BUILTIN set
+$FUNCTION set_builtin
+$SHORT_DOC set [--abefhkmnptuvxldBCHP] [-o option] [arg ...]
+ -a Mark variables which are modified or created for export.
+ -b Notify of job termination immediately.
+ -e Exit immediately if a command exits with a non-zero status.
+ -f Disable file name generation (globbing).
+ -h Locate and remember function commands as functions are
+ defined. Function commands are normally looked up when
+ the function is executed.
+ -i Force the shell to be an "interactive" one. Interactive shells
+ always read `~/.bashrc' on startup.
+ -k All keyword arguments are placed in the environment for a
+ command, not just those that precede the command name.
+ -m Job control is enabled.
+ -n Read commands but do not execute them.
+ -o option-name
+ Set the variable corresponding to option-name:
+ allexport same as -a
+ braceexpand same as -B
+#if defined (READLINE)
+ emacs use an emacs-style line editing interface
+#endif /* READLINE */
+ errexit same as -e
+ histexpand same as -H
+ ignoreeof the shell will not exit upon reading EOF
+ interactive-comments
+ allow comments to appear in interactive commands
+ monitor same as -m
+ noclobber disallow redirection to existing files
+ noexec same as -n
+ noglob same as -f
+ nohash same as -d
+ notify save as -b
+ nounset same as -u
+ physical same as -P
+ posix change the behavior of bash where the default
+ operation differs from the 1003.2 standard to
+ match the standard
+ privileged same as -p
+ verbose same as -v
+#if defined (READLINE)
+ vi use a vi-style line editing interface
+#endif /* READLINE */
+ xtrace same as -x
+ -p Turned on whenever the real and effective user ids do not match.
+ Disables processing of the $ENV file and importing of shell
+ functions. Turning this option off causes the effective uid and
+ gid to be set to the real uid and gid.
+ -t Exit after reading and executing one command.
+ -u Treat unset variables as an error when substituting.
+ -v Print shell input lines as they are read.
+ -x Print commands and their arguments as they are executed.
+ -l Save and restore the binding of the NAME in a FOR command.
+ -d Disable the hashing of commands that are looked up for execution.
+ Normally, commands are remembered in a hash table, and once
+ found, do not have to be looked up again.
+#if defined (BRACE_EXPANSION)
+ -B the shell will perform brace expansion
+#endif /* BRACE_EXPANSION */
+#if defined (BANG_HISTORY)
+ -H Enable ! style history substitution. This flag is on
+ by default.
+#endif /* BANG_HISTORY */
+ -C If set, disallow existing regular files to be overwritten
+ by redirection of output.
+ -P If set, do not follow symbolic links when executing commands
+ such as cd which change the current directory.
+
+Using + rather than - causes these flags to be turned off. The
+flags can also be used upon invocation of the shell. The current
+set of flags may be found in $-. The remaining n ARGs are positional
+parameters and are assigned, in order, to $1, $2, .. $n. If no
+ARGs are given, all shell variables are printed.
+$END
+
+/* An a-list used to match long options for set -o to the corresponding
+ option letter. */
+struct {
+ char *name;
+ int letter;
+} o_options[] = {
+ { "allexport", 'a' },
+#if defined (BRACE_EXPANSION)
+ { "braceexpand",'B' },
+#endif
+ { "errexit", 'e' },
+ { "histexpand", 'H' },
+ { "monitor", 'm' },
+ { "noexec", 'n' },
+ { "noglob", 'f' },
+ { "nohash", 'd' },
+#if defined (JOB_CONTROL)
+ { "notify", 'b' },
+#endif /* JOB_CONTROL */
+ {"nounset", 'u' },
+ {"physical", 'P' },
+ {"privileged", 'p' },
+ {"verbose", 'v' },
+ {"xtrace", 'x' },
+ {(char *)NULL, 0},
+};
+
+#define MINUS_O_FORMAT "%-15s\t%s\n"
+
+void
+list_minus_o_opts ()
+{
+ register int i;
+ char *on = "on", *off = "off";
+
+ printf (MINUS_O_FORMAT, "noclobber", (noclobber == 1) ? on : off);
+
+ if (find_variable ("ignoreeof") || find_variable ("IGNOREEOF"))
+ printf (MINUS_O_FORMAT, "ignoreeof", on);
+ else
+ printf (MINUS_O_FORMAT, "ignoreeof", off);
+
+ printf (MINUS_O_FORMAT, "interactive-comments",
+ interactive_comments ? on : off);
+
+ printf (MINUS_O_FORMAT, "posix", posixly_correct ? on : off);
+
+#if defined (READLINE)
+ if (no_line_editing)
+ {
+ printf (MINUS_O_FORMAT, "emacs", off);
+ printf (MINUS_O_FORMAT, "vi", off);
+ }
+ else
+ {
+ /* Magic. This code `knows' how readline handles rl_editing_mode. */
+ printf (MINUS_O_FORMAT, "emacs", (rl_editing_mode == 1) ? on : off);
+ printf (MINUS_O_FORMAT, "vi", (rl_editing_mode == 0) ? on : off);
+ }
+#endif /* READLINE */
+
+ for (i = 0; o_options[i].name; i++)
+ {
+ int *on_or_off, zero = 0;
+
+ on_or_off = find_flag (o_options[i].letter);
+ if (on_or_off == FLAG_UNKNOWN)
+ on_or_off = &zero;
+ printf (MINUS_O_FORMAT, o_options[i].name, (*on_or_off == 1) ? on : off);
+ }
+}
+
+set_minus_o_option (on_or_off, option_name)
+ int on_or_off;
+ char *option_name;
+{
+ int option_char = -1;
+
+ if (STREQ (option_name, "noclobber"))
+ {
+ if (on_or_off == FLAG_ON)
+ bind_variable ("noclobber", "");
+ else
+ unbind_variable ("noclobber");
+ stupidly_hack_special_variables ("noclobber");
+ }
+ else if (STREQ (option_name, "ignoreeof"))
+ {
+ unbind_variable ("ignoreeof");
+ unbind_variable ("IGNOREEOF");
+ if (on_or_off == FLAG_ON)
+ bind_variable ("IGNOREEOF", "10");
+ stupidly_hack_special_variables ("IGNOREEOF");
+ }
+
+#if defined (READLINE)
+ else if ((STREQ (option_name, "emacs")) || (STREQ (option_name, "vi")))
+ {
+ if (on_or_off == FLAG_ON)
+ {
+ rl_variable_bind ("editing-mode", option_name);
+
+ if (interactive)
+ with_input_from_stdin ();
+ no_line_editing = 0;
+ }
+ else
+ {
+ int isemacs = (rl_editing_mode == 1);
+ if ((isemacs && STREQ (option_name, "emacs")) ||
+ (!isemacs && STREQ (option_name, "vi")))
+ {
+ if (interactive)
+ with_input_from_stream (stdin, "stdin");
+ no_line_editing = 1;
+ }
+ else
+ builtin_error ("not in %s editing mode", option_name);
+ }
+ }
+#endif /* READLINE */
+ else if (STREQ (option_name, "interactive-comments"))
+ interactive_comments = (on_or_off == FLAG_ON);
+ else if (STREQ (option_name, "posix"))
+ {
+ posixly_correct = (on_or_off == FLAG_ON);
+ unbind_variable ("POSIXLY_CORRECT");
+ unbind_variable ("POSIX_PEDANTIC");
+ if (on_or_off == FLAG_ON)
+ {
+ bind_variable ("POSIXLY_CORRECT", "");
+ stupidly_hack_special_variables ("POSIXLY_CORRECT");
+ }
+ }
+ else
+ {
+ register int i;
+ for (i = 0; o_options[i].name; i++)
+ {
+ if (STREQ (option_name, o_options[i].name))
+ {
+ option_char = o_options[i].letter;
+ break;
+ }
+ }
+ if (option_char == -1)
+ {
+ builtin_error ("%s: unknown option name", option_name);
+ return (EXECUTION_FAILURE);
+ }
+ if (change_flag (option_char, on_or_off) == FLAG_ERROR)
+ {
+ bad_option (option_name);
+ return (EXECUTION_FAILURE);
+ }
+ }
+ return (EXECUTION_SUCCESS);
+}
+
+/* Set some flags from the word values in the input list. If LIST is empty,
+ then print out the values of the variables instead. If LIST contains
+ non-flags, then set $1 - $9 to the successive words of LIST. */
+set_builtin (list)
+ WORD_LIST *list;
+{
+ int on_or_off, flag_name, force_assignment = 0;
+
+ if (!list)
+ {
+ SHELL_VAR **vars;
+
+ vars = all_shell_variables ();
+ if (vars)
+ {
+ print_var_list (vars);
+ free (vars);
+ }
+
+ vars = all_shell_functions ();
+ if (vars)
+ {
+ print_var_list (vars);
+ free (vars);
+ }
+
+ return (EXECUTION_SUCCESS);
+ }
+
+ /* Check validity of flag arguments. */
+ if (*list->word->word == '-' || *list->word->word == '+')
+ {
+ register char *arg;
+ WORD_LIST *save_list = list;
+
+ while (list && (arg = list->word->word))
+ {
+ char c;
+
+ if (arg[0] != '-' && arg[0] != '+')
+ break;
+
+ /* `-' or `--' signifies end of flag arguments. */
+ if (arg[0] == '-' &&
+ (!arg[1] || (arg[1] == '-' && !arg[2])))
+ break;
+
+ while (c = *++arg)
+ {
+ if (find_flag (c) == FLAG_UNKNOWN && c != 'o')
+ {
+ char s[2];
+ s[0] = c; s[1] = '\0';
+ bad_option (s);
+ if (c == '?')
+ builtin_usage ();
+ return (c == '?' ? EXECUTION_SUCCESS : EXECUTION_FAILURE);
+ }
+ }
+ list = list->next;
+ }
+ list = save_list;
+ }
+
+ /* Do the set command. While the list consists of words starting with
+ '-' or '+' treat them as flags, otherwise, start assigning them to
+ $1 ... $n. */
+ while (list)
+ {
+ char *string = list->word->word;
+
+ /* If the argument is `--' or `-' then signal the end of the list
+ and remember the remaining arguments. */
+ if (string[0] == '-' && (!string[1] || (string[1] == '-' && !string[2])))
+ {
+ list = list->next;
+
+ /* `set --' unsets the positional parameters. */
+ if (string[1] == '-')
+ force_assignment = 1;
+
+ /* Until told differently, the old shell behaviour of
+ `set - [arg ...]' being equivalent to `set +xv [arg ...]'
+ stands. Posix.2 says the behaviour is marked as obsolescent. */
+ else
+ {
+ change_flag ('x', '+');
+ change_flag ('v', '+');
+ }
+
+ break;
+ }
+
+ if ((on_or_off = *string) &&
+ (on_or_off == '-' || on_or_off == '+'))
+ {
+ int i = 1;
+ while (flag_name = string[i++])
+ {
+ if (flag_name == '?')
+ {
+ builtin_usage ();
+ return (EXECUTION_SUCCESS);
+ }
+ else if (flag_name == 'o') /* -+o option-name */
+ {
+ char *option_name;
+ WORD_LIST *opt;
+
+ opt = list->next;
+
+ if (!opt)
+ {
+ list_minus_o_opts ();
+ continue;
+ }
+
+ option_name = opt->word->word;
+
+ if (!option_name || !*option_name || (*option_name == '-'))
+ {
+ list_minus_o_opts ();
+ continue;
+ }
+ list = list->next; /* Skip over option name. */
+
+ if (set_minus_o_option (on_or_off, option_name) != EXECUTION_SUCCESS)
+ return (EXECUTION_FAILURE);
+ }
+ else
+ {
+ if (change_flag (flag_name, on_or_off) == FLAG_ERROR)
+ {
+ char opt[3];
+ opt[0] = on_or_off;
+ opt[1] = flag_name;
+ opt[2] = '\0';
+ bad_option (opt);
+ builtin_usage ();
+ return (EXECUTION_FAILURE);
+ }
+ }
+ }
+ }
+ else
+ {
+ break;
+ }
+ list = list->next;
+ }
+
+ /* Assigning $1 ... $n */
+ if (list || force_assignment)
+ remember_args (list, 1);
+ return (EXECUTION_SUCCESS);
+}
+
+$BUILTIN unset
+$FUNCTION unset_builtin
+$SHORT_DOC unset [-f] [-v] [name ...]
+For each NAME, remove the corresponding variable or function. Given
+the `-v', unset will only act on variables. Given the `-f' flag,
+unset will only act on functions. With neither flag, unset first
+tries to unset a variable, and if that fails, then tries to unset a
+function. Some variables (such as PATH and IFS) cannot be unset; also
+see readonly.
+$END
+
+#define NEXT_VARIABLE() any_failed++; list = list->next; continue;
+
+unset_builtin (list)
+ WORD_LIST *list;
+{
+ int unset_function, unset_variable, unset_array, opt, any_failed;
+ char *name;
+
+ unset_function = unset_variable = unset_array = any_failed = 0;
+
+ reset_internal_getopt ();
+ while ((opt = internal_getopt (list, "fv")) != -1)
+ {
+ switch (opt)
+ {
+ case 'f':
+ unset_function = 1;
+ break;
+ case 'v':
+ unset_variable = 1;
+ break;
+ default:
+ builtin_usage ();
+ return (EXECUTION_FAILURE);
+ }
+ }
+
+ list = loptend;
+
+ if (unset_function && unset_variable)
+ {
+ builtin_error ("cannot simultaneously unset a function and a variable");
+ return (EXECUTION_FAILURE);
+ }
+
+ while (list)
+ {
+ SHELL_VAR *var;
+ int tem;
+#if defined (ARRAY_VARS)
+ char *t;
+#endif
+
+ name = list->word->word;
+
+#if defined (ARRAY_VARS)
+ if (!unset_function && valid_array_reference (name))
+ {
+ t = strchr (name, '[');
+ *t++ = '\0';
+ unset_array++;
+ }
+#endif
+
+ var = unset_function ? find_function (name) : find_variable (name);
+
+ if (var && !unset_function && non_unsettable_p (var))
+ {
+ builtin_error ("%s: cannot unset", name);
+ NEXT_VARIABLE ();
+ }
+
+ /* Posix.2 says that unsetting readonly variables is an error. */
+ if (var && readonly_p (var))
+ {
+ builtin_error ("%s: cannot unset: readonly %s",
+ name, unset_function ? "function" : "variable");
+ NEXT_VARIABLE ();
+ }
+
+ /* Unless the -f option is supplied, the name refers to a variable. */
+#if defined (ARRAY_VARS)
+ if (var && unset_array)
+ {
+ if (array_p (var) == 0)
+ {
+ builtin_error ("%s: not an array variable", name);
+ NEXT_VARIABLE ();
+ }
+ else
+ tem = unbind_array_element (var, t);
+ }
+ else
+#endif /* ARRAY_VARS */
+ tem = makunbound (name, unset_function ? shell_functions : shell_variables);
+
+ /* This is what Posix.2 draft 11+ says. ``If neither -f nor -v
+ is specified, the name refers to a variable; if a variable by
+ that name does not exist, a function by that name, if any,
+ shall be unset.'' */
+ if ((tem == -1) && !unset_function && !unset_variable)
+ tem = makunbound (name, shell_functions);
+
+ if (tem == -1)
+ any_failed++;
+ else if (!unset_function)
+ stupidly_hack_special_variables (name);
+
+ list = list->next;
+ }
+
+ if (any_failed)
+ return (EXECUTION_FAILURE);
+ else
+ return (EXECUTION_SUCCESS);
+}
--- /dev/null
+/* unwind_prot.h - Macros and functions for hacking unwind protection. */
+
+/* Copyright (C) 1993 Free Software Foundation, Inc.
+
+ This file is part of GNU Bash, the Bourne Again SHell.
+
+ Bash is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ Bash is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with Bash; see the file COPYING. If not, write to the Free Software
+ Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+#if !defined (_UNWIND_PROT_H)
+#define _UNWIND_PROT_H
+
+/* Run a function without interrupts. */
+extern void begin_unwind_frame ();
+extern void discard_unwind_frame ();
+extern void run_unwind_frame ();
+extern void add_unwind_protect ();
+extern void remove_unwind_protect ();
+extern void run_unwind_protects ();
+extern void unwind_protect_var ();
+
+/* Define for people who like their code to look a certain way. */
+#define end_unwind_frame()
+
+/* How to protect an integer. */
+#define unwind_protect_int(X) unwind_protect_var (&(X), (char *)(X), sizeof (int))
+
+/* How to protect a pointer to a string. */
+#define unwind_protect_string(X) \
+ unwind_protect_var ((int *)&(X), (X), sizeof (char *))
+
+/* How to protect any old pointer. */
+#define unwind_protect_pointer(X) unwind_protect_string (X)
+
+/* How to protect the contents of a jmp_buf. */
+#define unwind_protect_jmp_buf(X) \
+ unwind_protect_var ((int *)(X), (char *)(X), sizeof (procenv_t))
+
+#endif /* _UNWIND_PROT_H */
po/da.po f
po/de.gmo f
po/de.po f
+po/el.gmo f
+po/el.po f
po/eo.gmo f
po/eo.po f
po/es.gmo f
--- /dev/null
+# This file is a shell script that caches the results of configure
+# tests for CYGWIN32 so they don't need to be done when cross-compiling.
+
+# AC_FUNC_GETPGRP should also define GETPGRP_VOID
+ac_cv_func_getpgrp_void=${ac_cv_func_getpgrp_void='yes'}
+# AC_FUNC_SETVBUF_REVERSED should not define anything else
+ac_cv_func_setvbuf_reversed=${ac_cv_func_setvbuf_reversed='no'}
+# on CYGWIN32, system calls do not restart
+ac_cv_sys_restartable_syscalls=${ac_cv_sys_restartable_syscalls='no'}
+bash_cv_sys_restartable_syscalls=${bash_cv_sys_restartable_syscalls='no'}
+
+# these may be necessary, but they are currently commented out
+#ac_cv_c_bigendian=${ac_cv_c_bigendian='no'}
+ac_cv_sizeof_char_p=${ac_cv_sizeof_char_p='4'}
+ac_cv_sizeof_int=${ac_cv_sizeof_int='4'}
+ac_cv_sizeof_long=${ac_cv_sizeof_long='4'}
+ac_cv_sizeof_double=${ac_cv_sizeof_double='8'}
+
+bash_cv_dup2_broken=${bash_cv_dup2_broken='no'}
+bash_cv_pgrp_pipe=${bash_cv_pgrp_pipe='no'}
+bash_cv_type_rlimit=${bash_cv_type_rlimit='long'}
+bash_cv_decl_under_sys_siglist=${bash_cv_decl_under_sys_siglist='no'}
+bash_cv_under_sys_siglist=${bash_cv_under_sys_siglist='no'}
+bash_cv_sys_siglist=${bash_cv_sys_siglist='no'}
+bash_cv_opendir_not_robust=${bash_cv_opendir_not_robust='no'}
+bash_cv_getenv_redef=${bash_cv_getenv_redef='yes'}
+bash_cv_printf_declared=${bash_cv_printf_declared='yes'}
+bash_cv_ulimit_maxfds=${bash_cv_ulimit_maxfds='no'}
+bash_cv_getcwd_calls_popen=${bash_cv_getcwd_calls_popen='no'}
+bash_cv_must_reinstall_sighandlers=${bash_cv_must_reinstall_sighandlers='no'}
+bash_cv_job_control_missing=${bash_cv_job_control_missing='present'}
+bash_cv_sys_named_pipes=${bash_cv_sys_named_pipes='missing'}
+bash_cv_func_sigsetjmp=${bash_cv_func_sigsetjmp='missing'}
+bash_cv_mail_dir=${bash_cv_mail_dir='unknown'}
+bash_cv_func_strcoll_broken=${bash_cv_func_strcoll_broken='no'}
+
+bash_cv_type_int32_t=${bash_cv_type_int32_t='int'}
+bash_cv_type_u_int32_t=${bash_cv_type_u_int32_t='int'}
+
+ac_cv_type_bits64_t=${ac_cv_type_bits64_t='no'}
+
+# end of cross-build/cygwin32.cache
--- /dev/null
+This is the Bash FAQ, version 3.24, for Bash version 2.05b.
+
+This document contains a set of frequently-asked questions concerning
+Bash, the GNU Bourne-Again Shell. Bash is a freely-available command
+interpreter with advanced features for both interactive use and shell
+programming.
+
+Another good source of basic information about shells is the collection
+of FAQ articles periodically posted to comp.unix.shell.
+
+Questions and comments concerning this document should be sent to
+chet@po.cwru.edu.
+
+This document is available for anonymous FTP with the URL
+
+ftp://ftp.cwru.edu/pub/bash/FAQ
+
+The Bash home page is http://cnswww.cns.cwru.edu/~chet/bash/bashtop.html
+
+----------
+Contents:
+
+Section A: The Basics
+
+A1) What is it?
+A2) What's the latest version?
+A3) Where can I get it?
+A4) On what machines will bash run?
+A5) Will bash run on operating systems other than Unix?
+A6) How can I build bash with gcc?
+A7) How can I make bash my login shell?
+A8) I just changed my login shell to bash, and now I can't FTP into my
+ machine. Why not?
+A9) What's the `POSIX 1003.2 standard'?
+A10) What is the bash `posix mode'?
+
+Section B: The latest version
+
+B1) What's new in version 2.05b?
+B2) Are there any user-visible incompatibilities between bash-2.05b and
+ bash-1.14.7?
+
+Section C: Differences from other Unix shells
+
+C1) How does bash differ from sh, the Bourne shell?
+C2) How does bash differ from the Korn shell, version ksh88?
+C3) Which new features in ksh-93 are not in bash, and which are?
+
+Section D: Why does bash do some things differently than other Unix shells?
+
+D1) Why does bash run a different version of `command' than
+ `which command' says it will?
+D2) Why doesn't bash treat brace expansions exactly like csh?
+D3) Why doesn't bash have csh variable modifiers?
+D4) How can I make my csh aliases work when I convert to bash?
+D5) How can I pipe standard output and standard error from one command to
+ another, like csh does with `|&'?
+D6) Now that I've converted from ksh to bash, are there equivalents to
+ ksh features like autoloaded functions and the `whence' command?
+
+Section E: Why does bash do certain things the way it does?
+
+E1) Why is the bash builtin `test' slightly different from /bin/test?
+E2) Why does bash sometimes say `Broken pipe'?
+E3) When I have terminal escape sequences in my prompt, why does bash
+ wrap lines at the wrong column?
+E4) If I pipe the output of a command into `read variable', why doesn't
+ the output show up in $variable when the read command finishes?
+E5) I have a bunch of shell scripts that use backslash-escaped characters
+ in arguments to `echo'. Bash doesn't interpret these characters. Why
+ not, and how can I make it understand them?
+E6) Why doesn't a while or for loop get suspended when I type ^Z?
+E7) What about empty for loops in Makefiles?
+E8) Why does the arithmetic evaluation code complain about `08'?
+E9) Why does the pattern matching expression [A-Z]* match files beginning
+ with every letter except `z'?
+E10) Why does `cd //' leave $PWD as `//'?
+E11) If I resize my xterm while another program is running, why doesn't bash
+ notice the change?
+
+Section F: Things to watch out for on certain Unix versions
+
+F1) Why can't I use command line editing in my `cmdtool'?
+F2) I built bash on Solaris 2. Why do globbing expansions and filename
+ completion chop off the first few characters of each filename?
+F3) Why does bash dump core after I interrupt username completion or
+ `~user' tilde expansion on a machine running NIS?
+F4) I'm running SVR4.2. Why is the line erased every time I type `@'?
+F5) Why does bash report syntax errors when my C News scripts use a
+ redirection before a subshell command?
+F6) Why can't I use vi-mode editing on Red Hat Linux 6.1?
+F7) Why do bash-2.05a and bash-2.05b fail to compile `printf.def' on
+ HP/UX 11.x?
+
+Section G: How can I get bash to do certain common things?
+
+G1) How can I get bash to read and display eight-bit characters?
+G2) How do I write a function `x' to replace builtin command `x', but
+ still invoke the command from within the function?
+G3) How can I find the value of a shell variable whose name is the value
+ of another shell variable?
+G4) How can I make the bash `time' reserved word print timing output that
+ looks like the output from my system's /usr/bin/time?
+G5) How do I get the current directory into my prompt?
+G6) How can I rename "*.foo" to "*.bar"?
+G7) How can I translate a filename from uppercase to lowercase?
+G8) How can I write a filename expansion (globbing) pattern that will match
+ all files in the current directory except "." and ".."?
+
+Section H: Where do I go from here?
+
+H1) How do I report bugs in bash, and where should I look for fixes and
+ advice?
+H2) What kind of bash documentation is there?
+H3) What's coming in future versions?
+H4) What's on the bash `wish list'?
+H5) When will the next release appear?
+
+----------
+Section A: The Basics
+
+A1) What is it?
+
+Bash is a Unix command interpreter (shell). It is an implementation of
+the Posix 1003.2 shell standard, and resembles the Korn and System V
+shells.
+
+Bash contains a number of enhancements over those shells, both
+for interactive use and shell programming. Features geared
+toward interactive use include command line editing, command
+history, job control, aliases, and prompt expansion. Programming
+features include additional variable expansions, shell
+arithmetic, and a number of variables and options to control
+shell behavior.
+
+Bash was originally written by Brian Fox of the Free Software
+Foundation. The current developer and maintainer is Chet Ramey
+of Case Western Reserve University.
+
+A2) What's the latest version?
+
+The latest version is 2.05b, first made available on Wednesday, 17
+July, 2002.
+
+A3) Where can I get it?
+
+Bash is the GNU project's shell, and so is available from the
+master GNU archive site, ftp.gnu.org, and its mirrors. The
+latest version is also available for FTP from ftp.cwru.edu.
+The following URLs tell how to get version 2.05b:
+
+ftp://ftp.gnu.org/pub/gnu/bash/bash-2.05b.tar.gz
+ftp://ftp.cwru.edu/pub/bash/bash-2.05b.tar.gz
+
+Formatted versions of the documentation are available with the URLs:
+
+ftp://ftp.gnu.org/pub/gnu/bash/bash-doc-2.05b.tar.gz
+ftp://ftp.cwru.edu/pub/bash/bash-doc-2.05b.tar.gz
+
+A4) On what machines will bash run?
+
+Bash has been ported to nearly every version of UNIX. All you
+should have to do to build it on a machine for which a port
+exists is to type `configure' and then `make'. The build process
+will attempt to discover the version of UNIX you have and tailor
+itself accordingly, using a script created by GNU autoconf.
+
+More information appears in the file `INSTALL' in the distribution.
+
+The Bash web page (http://cnswww.cns.cwru.edu/~chet/bash/bashtop.html)
+explains how to obtain binary versions of bash for most of the major
+commercial Unix systems.
+
+A5) Will bash run on operating systems other than Unix?
+
+Configuration specifics for Unix-like systems such as QNX and
+LynxOS are included in the distribution. Bash-2.05 and later
+versions should compile and run on Minix 2.0 (patches were
+contributed), but I don't believe anyone has built bash-2.x on
+earlier Minix versions yet.
+
+Bash has been ported to versions of Windows implementing the Win32
+programming interface. This includes Windows 95 and Windows NT.
+The port was done by Cygnus Solutions as part of their CYGWIN
+project. For more information about the project, look at the URLs
+
+http://www.cygwin.com/
+http://sourceware.cygnus.com/cygwin
+
+Cygnus originally ported bash-1.14.7, and that port was part of their
+early GNU-Win32 (the original name) releases. Cygnus has also done a
+port of bash-2.05 to the CYGWIN environment, and it is available as
+part of their current release.
+
+Bash-2.05b should require no local Cygnus changes to build and run under
+CYGWIN.
+
+The Cygnus port works only on Intel machines. There is a port of bash
+(I don't know which version) to the alpha/NT environment available from
+
+ftp://ftp.gnustep.org//pub/win32/bash-alpha-nt-1.01.tar.gz
+
+DJ Delorie has a port of bash-2.x which runs under MS-DOS, as part
+of the DJGPP project. For more information on the project, see
+
+http://www.delorie.com/djgpp/
+
+I have been told that the original DJGPP port was done by Daisuke Aoyama.
+
+Mark Elbrecht <snowball3@bigfoot.com> has sent me notice that bash-2.04
+is available for DJGPP V2. The files are available as:
+
+ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/bsh204b.zip binary
+ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/bsh204d.zip documentation
+ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/bsh204s.zip source
+
+Mark has begun to work with bash-2.05, but I don't know the status.
+
+Ports of bash-1.12 and bash-2.0 are available for OS/2 from
+
+ftp://hobbes.nmsu.edu/pub/os2/util/shell/bash_112.zip
+ftp://hobbes.nmsu.edu/pub/os2/util/shell/bash-2.0(253).zip
+
+I haven't looked at either, but the second appears to be a binary-only
+distribution. Beware.
+
+I have received word that Bash (I'm not sure which version, but I
+believe that it's at least bash-2.02.1) is the standard shell on
+BeOS.
+
+A6) How can I build bash with gcc?
+
+Bash configures to use gcc by default if it is available. Read the
+file INSTALL in the distribution for more information.
+
+A7) How can I make bash my login shell?
+
+Some machines let you use `chsh' to change your login shell. Other
+systems use `passwd -s' or `passwd -e'. If one of these works for
+you, that's all you need. Note that many systems require the full
+pathname to a shell to appear in /etc/shells before you can make it
+your login shell. For this, you may need the assistance of your
+friendly local system administrator.
+
+If you cannot do this, you can still use bash as your login shell, but
+you need to perform some tricks. The basic idea is to add a command
+to your login shell's startup file to replace your login shell with
+bash.
+
+For example, if your login shell is csh or tcsh, and you have installed
+bash in /usr/gnu/bin/bash, add the following line to ~/.login:
+
+ if ( -f /usr/gnu/bin/bash ) exec /usr/gnu/bin/bash --login
+
+(the `--login' tells bash that it is a login shell).
+
+It's not a good idea to put this command into ~/.cshrc, because every
+csh you run without the `-f' option, even ones started to run csh scripts,
+reads that file. If you must put the command in ~/.cshrc, use something
+like
+
+ if ( $?prompt ) exec /usr/gnu/bin/bash --login
+
+to ensure that bash is exec'd only when the csh is interactive.
+
+If your login shell is sh or ksh, you have to do two things.
+
+First, create an empty file in your home directory named `.bash_profile'.
+The existence of this file will prevent the exec'd bash from trying to
+read ~/.profile, and re-execing itself over and over again. ~/.bash_profile
+is the first file bash tries to read initialization commands from when
+it is invoked as a login shell.
+
+Next, add a line similar to the above to ~/.profile:
+
+ [ -f /usr/gnu/bin/bash ] && [ -x /usr/gnu/bin/bash ] && \
+ exec /usr/gnu/bin/bash --login
+
+This will cause login shells to replace themselves with bash running as
+a login shell. Once you have this working, you can copy your initialization
+code from ~/.profile to ~/.bash_profile.
+
+I have received word that the recipe supplied above is insufficient for
+machines running CDE. CDE has a maze of twisty little startup files, all
+slightly different.
+
+If you cannot change your login shell in the password file to bash, you
+will have to (apparently) live with CDE using the shell in the password
+file to run its startup scripts. If you have changed your shell to bash,
+there is code in the CDE startup files (on Solaris, at least) that attempts
+to do the right thing. It is, however, often broken, and may require that
+you use the $BASH_ENV trick described below.
+
+`dtterm' claims to use $SHELL as the default program to start, so if you
+can change $SHELL in the CDE startup files, you should be able to use bash
+in your terminal windows.
+
+Setting DTSOURCEPROFILE in ~/.dtprofile will cause the `Xsession' program
+to read your login shell's startup files. You may be able to use bash for
+the rest of the CDE programs by setting SHELL to bash in ~/.dtprofile as
+well, but I have not tried this.
+
+You can use the above `exec' recipe to start bash when not logging in with
+CDE by testing the value of the DT variable:
+
+ if [ -n "$DT" ]; then
+ [ -f /usr/gnu/bin/bash ] && exec /usr/gnu/bin/bash --login
+ fi
+
+If CDE starts its shells non-interactively during login, the login shell
+startup files (~/.profile, ~/.bash_profile) will not be sourced at login.
+To get around this problem, append a line similar to the following to your
+~/.dtprofile:
+
+ BASH_ENV=${HOME}/.bash_profile ; export BASH_ENV
+
+and add the following line to the beginning of ~/.bash_profile:
+
+ unset BASH_ENV
+
+A8) I just changed my login shell to bash, and now I can't FTP into my
+ machine. Why not?
+
+You must add the full pathname to bash to the file /etc/shells. As
+noted in the answer to the previous question, many systems require
+this before you can make bash your login shell.
+
+Most versions of ftpd use this file to prohibit `special' users
+such as `uucp' and `news' from using FTP.
+
+A9) What's the `POSIX 1003.2 standard'?
+
+POSIX is a name originally coined by Richard Stallman for a
+family of open system standards based on UNIX. There are a
+number of aspects of UNIX under consideration for
+standardization, from the basic system services at the system
+call and C library level to applications and tools to system
+administration and management. Each area of standardization is
+assigned to a working group in the 1003 series.
+
+The POSIX Shell and Utilities standard has been developed by IEEE
+Working Group 1003.2 (POSIX.2). It concentrates on the command
+interpreter interface and utility programs commonly executed from
+the command line or by other programs. An initial version of the
+standard has been approved and published by the IEEE, and work is
+currently underway to update it.
+
+Bash is concerned with the aspects of the shell's behavior
+defined by POSIX.2. The shell command language has of course
+been standardized, including the basic flow control and program
+execution constructs, I/O redirection and pipelining, argument
+handling, variable expansion, and quoting.
+
+The `special' builtins, which must be implemented as part of the
+shell to provide the desired functionality, are specified as
+being part of the shell; examples of these are `eval' and
+`export'. Other utilities appear in the sections of POSIX.2 not
+devoted to the shell which are commonly (and in some cases must
+be) implemented as builtin commands, such as `read' and `test'.
+POSIX.2 also specifies aspects of the shell's interactive
+behavior as part of the UPE, including job control and command
+line editing. Only vi-style line editing commands have been
+standardized; emacs editing commands were left out due to
+objections.
+
+The Open Group has made an older version of its Single Unix
+Specification (version 2), which is very similar to POSIX.2,
+available on the web at
+
+http://www.opengroup.org/onlinepubs/007908799/
+
+The Single Unix Specification, version 3, is available on the web at
+
+http://www.opengroup.org/onlinepubs/007904975/
+
+A10) What is the bash `posix mode'?
+
+Although bash is an implementation of the POSIX.2 shell
+specification, there are areas where the bash default behavior
+differs from that spec. The bash `posix mode' changes the bash
+behavior in these areas so that it obeys the spec more closely.
+
+Posix mode is entered by starting bash with the --posix or
+'-o posix' option or executing `set -o posix' after bash is running.
+
+The specific aspects of bash which change when posix mode is
+active are listed in the file POSIX in the bash distribution.
+They are also listed in a section in the Bash Reference Manual
+(from which that file is generated).
+
+Section B: The latest version
+
+B1) What's new in version 2.05b?
+
+The raison d'etre for bash-2.05b is to make a second intermediate
+release containing the first of the new features to be available
+in bash-3.0 and get feedback on those features before proceeding.
+The major new feature is multibyte character support in both Bash
+and Readline.
+
+Bash-2.05b contains the following new features (see the manual page for
+complete descriptions and the CHANGES and NEWS files in the bash-2.05b
+distribution):
+
+o support for multibyte characters has been added to both bash and readline
+
+o the DEBUG trap is now run *before* simple commands, ((...)) commands,
+ [[...]] conditional commands, and for ((...)) loops
+
+o the shell now performs arithmetic in the largest integer size the machine
+ supports (intmax_t)
+
+o there is a new \D{...} prompt expansion; passes the `...' to strftime(3)
+ and inserts the result into the expanded prompt
+
+o there is a new `here-string' redirection operator: <<< word
+
+o when displaying variables, function attributes and definitions are shown
+ separately, allowing them to be re-used as input (attempting to re-use
+ the old output would result in syntax errors).
+
+o `read' has a new `-u fd' option to read from a specified file descriptor
+
+o the bash debugger in examples/bashdb has been modified to work with the
+ new DEBUG trap semantics, the command set has been made more gdb-like,
+ and the changes to $LINENO make debugging functions work better
+
+o the expansion of $LINENO inside a shell function is only relative to the
+ function start if the shell is interactive -- if the shell is running a
+ script, $LINENO expands to the line number in the script. This is as
+ POSIX-2001 requires
+
+
+A short feature history dating from Bash-2.0:
+
+Bash-2.05a introduced the following new features:
+
+o The `printf' builtin has undergone major work
+
+o There is a new read-only `shopt' option: login_shell, which is set by
+ login shells and unset otherwise
+
+o New `\A' prompt string escape sequence; expanding to time in 24-hour
+ HH:MM format
+
+o New `-A group/-g' option to complete and compgen; goes group name
+ completion
+
+o New [+-]O invocation option to set and unset `shopt' options at startup
+
+o ksh-like `ERR' trap
+
+o `for' loops now allow empty word lists after the `in' reserved word
+
+o new `hard' and `soft' arguments for the `ulimit' builtin
+
+o Readline can be configured to place the user at the same point on the line
+ when retrieving commands from the history list
+
+o Readline can be configured to skip `hidden' files (filenames with a leading
+ `.' on Unix) when performing completion
+
+Bash-2.05 introduced the following new features:
+
+o This version has once again reverted to using locales and strcoll(3) when
+ processing pattern matching bracket expressions, as POSIX requires.
+o Added a new `--init-file' invocation argument as a synonym for `--rcfile',
+ per the new GNU coding standards.
+o The /dev/tcp and /dev/udp redirections now accept service names as well as
+ port numbers.
+o `complete' and `compgen' now take a `-o value' option, which controls some
+ of the aspects of that compspec. Valid values are:
+
+ default - perform bash default completion if programmable
+ completion produces no matches
+ dirnames - perform directory name completion if programmable
+ completion produces no matches
+ filenames - tell readline that the compspec produces filenames,
+ so it can do things like append slashes to
+ directory names and suppress trailing spaces
+o A new loadable builtin, realpath, which canonicalizes and expands symlinks
+ in pathname arguments.
+o When `set' is called without options, it prints function defintions in a
+ way that allows them to be reused as input. This affects `declare' and
+ `declare -p' as well. This only happens when the shell is not in POSIX
+ mode, since POSIX.2 forbids this behavior.
+
+Bash-2.04 introduced the following new features:
+
+o Programmable word completion with the new `complete' and `compgen' builtins;
+ examples are provided in examples/complete/complete-examples
+o `history' has a new `-d' option to delete a history entry
+o `bind' has a new `-x' option to bind key sequences to shell commands
+o The prompt expansion code has new `\j' and `\l' escape sequences
+o The `no_empty_cmd_completion' shell option, if enabled, inhibits
+ command completion when TAB is typed on an empty line
+o `help' has a new `-s' option to print a usage synopsis
+o New arithmetic operators: var++, var--, ++var, --var, expr1,expr2 (comma)
+o New ksh93-style arithmetic for command:
+ for ((expr1 ; expr2; expr3 )); do list; done
+o `read' has new options: `-t', `-n', `-d', `-s'
+o The redirection code handles several filenames specially: /dev/fd/N,
+ /dev/stdin, /dev/stdout, /dev/stderr
+o The redirection code now recognizes /dev/tcp/HOST/PORT and
+ /dev/udp/HOST/PORT and tries to open a TCP or UDP socket, respectively,
+ to the specified port on the specified host
+o The ${!prefix*} expansion has been implemented
+o A new FUNCNAME variable, which expands to the name of a currently-executing
+ function
+o The GROUPS variable is no longer readonly
+o A new shopt `xpg_echo' variable, to control the behavior of echo with
+ respect to backslash-escape sequences at runtime
+o The NON_INTERACTIVE_LOGIN_SHELLS #define has returned
+
+The version of Readline released with Bash-2.04, Readline-4.1, had several
+new features as well:
+
+o Parentheses matching is always compiled into readline, and controllable
+ with the new `blink-matching-paren' variable
+o The history-search-forward and history-search-backward functions now leave
+ point at the end of the line when the search string is empty, like
+ reverse-search-history, and forward-search-history
+o A new function for applications: rl_on_new_line_with_prompt()
+o New variables for applications: rl_already_prompted, and rl_gnu_readline_p
+
+
+Bash-2.03 had very few new features, in keeping with the convention
+that odd-numbered releases provide mainly bug fixes. A number of new
+features were added to Readline, mostly at the request of the Cygnus
+folks.
+
+A new shopt option, `restricted_shell', so that startup files can test
+ whether or not the shell was started in restricted mode
+Filename generation is now performed on the words between ( and ) in
+ compound array assignments (this is really a bug fix)
+OLDPWD is now auto-exported, as POSIX.2 requires
+ENV and BASH_ENV are read-only variables in a restricted shell
+Bash may now be linked against an already-installed Readline library,
+ as long as the Readline library is version 4 or newer
+All shells begun with the `--login' option will source the login shell
+ startup files, even if the shell is not interactive
+
+There were lots of changes to the version of the Readline library released
+along with Bash-2.03. For a complete list of the changes, read the file
+CHANGES in the Bash-2.03 distribution.
+
+Bash-2.02 contained the following new features:
+
+a new version of malloc (based on the old GNU malloc code in previous
+ bash versions) that is more page-oriented, more conservative
+ with memory usage, does not `orphan' large blocks when they
+ are freed, is usable on 64-bit machines, and has allocation
+ checking turned on unconditionally
+POSIX.2-style globbing character classes ([:alpha:], [:alnum:], etc.)
+POSIX.2-style globbing equivalence classes
+POSIX.2-style globbing collating symbols
+the ksh [[...]] extended conditional command
+the ksh egrep-style extended pattern matching operators
+a new `printf' builtin
+the ksh-like $(<filename) command substitution, which is equivalent to
+ $(cat filename)
+new tilde prefixes that expand to directories from the directory stack
+new `**' arithmetic operator to do exponentiation
+case-insensitive globbing (filename expansion)
+menu completion a la tcsh
+`magic-space' history expansion function like tcsh
+the readline inputrc `language' has a new file inclusion directive ($include)
+
+Bash-2.01 contained only a few new features:
+
+new `GROUPS' builtin array variable containing the user's group list
+new bindable readline commands: history-and-alias-expand-line and
+ alias-expand-line
+
+Bash-2.0 contained extensive changes and new features from bash-1.14.7.
+Here's a short list:
+
+new `time' reserved word to time pipelines, shell builtins, and
+ shell functions
+one-dimensional arrays with a new compound assignment statement,
+ appropriate expansion constructs and modifications to some
+ of the builtins (read, declare, etc.) to use them
+new quoting syntaxes for ANSI-C string expansion and locale-specific
+ string translation
+new expansions to do substring extraction, pattern replacement, and
+ indirect variable expansion
+new builtins: `disown' and `shopt'
+new variables: HISTIGNORE, SHELLOPTS, PIPESTATUS, DIRSTACK, GLOBIGNORE,
+ MACHTYPE, BASH_VERSINFO
+special handling of many unused or redundant variables removed
+ (e.g., $notify, $glob_dot_filenames, $no_exit_on_failed_exec)
+dynamic loading of new builtin commands; many loadable examples provided
+new prompt expansions: \a, \e, \n, \H, \T, \@, \v, \V
+history and aliases available in shell scripts
+new readline variables: enable-keypad, mark-directories, input-meta,
+ visible-stats, disable-completion, comment-begin
+new readline commands to manipulate the mark and operate on the region
+new readline emacs mode commands and bindings for ksh-88 compatibility
+updated and extended builtins
+new DEBUG trap
+expanded (and now documented) restricted shell mode
+
+implementation stuff:
+autoconf-based configuration
+nearly all of the bugs reported since version 1.14 have been fixed
+most builtins converted to use builtin `getopt' for consistency
+most builtins use -p option to display output in a reusable form
+ (for consistency)
+grammar tighter and smaller (66 reduce-reduce conflicts gone)
+lots of code now smaller and faster
+test suite greatly expanded
+
+B2) Are there any user-visible incompatibilities between bash-2.05b and
+ bash-1.14.7?
+
+There are a few incompatibilities between version 1.14.7 and version 2.05b.
+They are detailed in the file COMPAT in the bash distribution. That file
+is not meant to be all-encompassing; send mail to bash-maintainers@gnu.org
+if if you find something that's not mentioned there.
+
+Section C: Differences from other Unix shells
+
+C1) How does bash differ from sh, the Bourne shell?
+
+This is a non-comprehensive list of features that differentiate bash
+from the SVR4.2 shell. The bash manual page explains these more
+completely.
+
+Things bash has that sh does not:
+ long invocation options
+ [+-]O invocation option
+ -l invocation option
+ `!' reserved word to invert pipeline return value
+ `time' reserved word to time pipelines and shell builtins
+ the `function' reserved word
+ the `select' compound command and reserved word
+ arithmetic for command: for ((expr1 ; expr2; expr3 )); do list; done
+ new $'...' and $"..." quoting
+ the $(...) form of command substitution
+ the $(<filename) form of command substitution, equivalent to
+ $(cat filename)
+ the ${#param} parameter value length operator
+ the ${!param} indirect parameter expansion operator
+ the ${!param*} prefix expansion operator
+ the ${param:offset[:length]} parameter substring operator
+ the ${param/pat[/string]} parameter pattern substitution operator
+ expansions to perform substring removal (${p%[%]w}, ${p#[#]w})
+ expansion of positional parameters beyond $9 with ${num}
+ variables: BASH, BASH_VERSION, BASH_VERSINFO, UID, EUID, REPLY,
+ TIMEFORMAT, PPID, PWD, OLDPWD, SHLVL, RANDOM, SECONDS,
+ LINENO, HISTCMD, HOSTTYPE, OSTYPE, MACHTYPE, HOSTNAME,
+ ENV, PS3, PS4, DIRSTACK, PIPESTATUS, HISTSIZE, HISTFILE,
+ HISTFILESIZE, HISTCONTROL, HISTIGNORE, GLOBIGNORE, GROUPS,
+ PROMPT_COMMAND, FCEDIT, FIGNORE, IGNOREEOF, INPUTRC,
+ SHELLOPTS, OPTERR, HOSTFILE, TMOUT, FUNCNAME, histchars,
+ auto_resume
+ DEBUG trap
+ ERR trap
+ variable arrays with new compound assignment syntax
+ redirections: <>, &>, >|, <<<, [n]<&word-, [n]>&word-
+ prompt string special char translation and variable expansion
+ auto-export of variables in initial environment
+ command search finds functions before builtins
+ bash return builtin will exit a file sourced with `.'
+ builtins: cd -/-L/-P, exec -l/-c/-a, echo -e/-E, hash -d/-l/-p/-t.
+ export -n/-f/-p/name=value, pwd -L/-P,
+ read -e/-p/-a/-t/-n/-d/-s/-u,
+ readonly -a/-f/name=value, trap -l, set +o,
+ set -b/-m/-o option/-h/-p/-B/-C/-H/-P,
+ unset -f/-v, ulimit -m/-p/-u,
+ type -a/-p/-t/-f/-P, suspend -f, kill -n,
+ test -o optname/s1 == s2/s1 < s2/s1 > s2/-nt/-ot/-ef/-O/-G/-S
+ bash reads ~/.bashrc for interactive shells, $ENV for non-interactive
+ bash restricted shell mode is more extensive
+ bash allows functions and variables with the same name
+ brace expansion
+ tilde expansion
+ arithmetic expansion with $((...)) and `let' builtin
+ the `[[...]]' extended conditional command
+ process substitution
+ aliases and alias/unalias builtins
+ local variables in functions and `local' builtin
+ readline and command-line editing with programmable completion
+ command history and history/fc builtins
+ csh-like history expansion
+ other new bash builtins: bind, command, compgen, complete, builtin,
+ declare/typeset, dirs, enable, fc, help,
+ history, logout, popd, pushd, disown, shopt,
+ printf
+ exported functions
+ filename generation when using output redirection (command >a*)
+ POSIX.2-style globbing character classes
+ POSIX.2-style globbing equivalence classes
+ POSIX.2-style globbing collating symbols
+ egrep-like extended pattern matching operators
+ case-insensitive pattern matching and globbing
+ variable assignments preceding commands affect only that command,
+ even for builtins and functions
+ posix mode
+ redirection to /dev/fd/N, /dev/stdin, /dev/stdout, /dev/stderr,
+ /dev/tcp/host/port, /dev/udp/host/port
+
+Things sh has that bash does not:
+ uses variable SHACCT to do shell accounting
+ includes `stop' builtin (bash can use alias stop='kill -s STOP')
+ `newgrp' builtin
+ turns on job control if called as `jsh'
+ $TIMEOUT (like bash $TMOUT)
+ `^' is a synonym for `|'
+ new SVR4.2 sh builtins: mldmode, priv
+
+Implementation differences:
+ redirection to/from compound commands causes sh to create a subshell
+ bash does not allow unbalanced quotes; sh silently inserts them at EOF
+ bash does not mess with signal 11
+ sh sets (euid, egid) to (uid, gid) if -p not supplied and uid < 100
+ bash splits only the results of expansions on IFS, using POSIX.2
+ field splitting rules; sh splits all words on IFS
+ sh does not allow MAILCHECK to be unset (?)
+ sh does not allow traps on SIGALRM or SIGCHLD
+ bash allows multiple option arguments when invoked (e.g. -x -v);
+ sh allows only a single option argument (`sh -x -v' attempts
+ to open a file named `-v', and, on SunOS 4.1.4, dumps core.
+ On Solaris 2.4 and earlier versions, sh goes into an infinite
+ loop.)
+ sh exits a script if any builtin fails; bash exits only if one of
+ the POSIX.2 `special' builtins fails
+
+C2) How does bash differ from the Korn shell, version ksh88?
+
+Things bash has or uses that ksh88 does not:
+ long invocation options
+ [-+]O invocation option
+ -l invocation option
+ `!' reserved word
+ arithmetic for command: for ((expr1 ; expr2; expr3 )); do list; done
+ arithmetic in largest machine-supported size (intmax_t)
+ posix mode and posix conformance
+ command hashing
+ tilde expansion for assignment statements that look like $PATH
+ process substitution with named pipes if /dev/fd is not available
+ the ${!param} indirect parameter expansion operator
+ the ${!param*} prefix expansion operator
+ the ${param:offset[:length]} parameter substring operator
+ the ${param/pat[/string]} parameter pattern substitution operator
+ variables: BASH, BASH_VERSION, BASH_VERSINFO, UID, EUID, SHLVL,
+ TIMEFORMAT, HISTCMD, HOSTTYPE, OSTYPE, MACHTYPE,
+ HISTFILESIZE, HISTIGNORE, HISTCONTROL, PROMPT_COMMAND,
+ IGNOREEOF, FIGNORE, INPUTRC, HOSTFILE, DIRSTACK,
+ PIPESTATUS, HOSTNAME, OPTERR, SHELLOPTS, GLOBIGNORE,
+ GROUPS, FUNCNAME, histchars, auto_resume
+ prompt expansion with backslash escapes and command substitution
+ redirection: &> (stdout and stderr), <<<, [n]<&word-, [n]>&word-
+ more extensive and extensible editing and programmable completion
+ builtins: bind, builtin, command, declare, dirs, echo -e/-E, enable,
+ exec -l/-c/-a, fc -s, export -n/-f/-p, hash, help, history,
+ jobs -x/-r/-s, kill -s/-n/-l, local, logout, popd, pushd,
+ read -e/-p/-a/-t/-n/-d/-s, readonly -a/-n/-f/-p,
+ set -o braceexpand/-o histexpand/-o interactive-comments/
+ -o notify/-o physical/-o posix/-o hashall/-o onecmd/
+ -h/-B/-C/-b/-H/-P, set +o, suspend, trap -l, type,
+ typeset -a/-F/-p, ulimit -u, umask -S, alias -p, shopt,
+ disown, printf, complete, compgen
+ `!' csh-style history expansion
+ POSIX.2-style globbing character classes
+ POSIX.2-style globbing equivalence classes
+ POSIX.2-style globbing collating symbols
+ egrep-like extended pattern matching operators
+ case-insensitive pattern matching and globbing
+ `**' arithmetic operator to do exponentiation
+ redirection to /dev/fd/N, /dev/stdin, /dev/stdout, /dev/stderr
+ arrays of unlimited size
+ TMOUT is default timeout for `read' and `select'
+
+Things ksh88 has or uses that bash does not:
+ tracked aliases (alias -t)
+ variables: ERRNO, FPATH, EDITOR, VISUAL
+ co-processes (|&, >&p, <&p)
+ weirdly-scoped functions
+ typeset +f to list all function names without definitions
+ text of command history kept in a file, not memory
+ builtins: alias -x, cd old new, fc -e -, newgrp, print,
+ read -p/-s/var?prompt, set -A/-o gmacs/
+ -o bgnice/-o markdirs/-o nolog/-o trackall/-o viraw/-s,
+ typeset -H/-L/-R/-Z/-A/-ft/-fu/-fx/-l/-u/-t, whence
+ using environment to pass attributes of exported variables
+ arithmetic evaluation done on arguments to some builtins
+ reads .profile from $PWD when invoked as login shell
+
+Implementation differences:
+ ksh runs last command of a pipeline in parent shell context
+ bash has brace expansion by default (ksh88 compile-time option)
+ bash has fixed startup file for all interactive shells; ksh reads $ENV
+ bash has exported functions
+ bash command search finds functions before builtins
+ bash waits for all commands in pipeline to exit before returning status
+ emacs-mode editing has some slightly different key bindings
+
+C3) Which new features in ksh-93 are not in bash, and which are?
+
+New things in ksh-93 not in bash-2.05b:
+ associative arrays
+ floating point arithmetic and variables
+ math library functions
+ ${!name[sub]} name of subscript for associative array
+ `.' is allowed in variable names to create a hierarchical namespace
+ more extensive compound assignment syntax
+ discipline functions
+ `sleep' and `getconf' builtins (bash has loadable versions)
+ typeset -n and `nameref' variables
+ KEYBD trap
+ variables: .sh.edchar, .sh.edmode, .sh.edcol, .sh.edtext, .sh.version,
+ .sh.name, .sh.subscript, .sh.value, .sh.match, HISTEDIT
+ backreferences in pattern matching (\N)
+ `&' operator in pattern lists for matching
+ print -f (bash uses printf)
+ `fc' has been renamed to `hist'
+ `.' can execute shell functions
+ exit statuses between 0 and 255
+ set -o pipefail
+ `+=' variable assignment operator
+ FPATH and PATH mixing
+ getopts -a
+ -I invocation option
+ DEBUG trap now executed before each simple command, instead of after
+ printf %H, %P, %T, %Z modifiers, output base for %d
+ lexical scoping for local variables in `ksh' functions
+ no scoping for local variables in `POSIX' functions
+
+New things in ksh-93 present in bash-2.05b:
+ [n]<&word- and [n]>&word- redirections (combination dup and close)
+ for (( expr1; expr2; expr3 )) ; do list; done - arithmetic for command
+ ?:, ++, --, `expr1 , expr2' arithmetic operators
+ expansions: ${!param}, ${param:offset[:len]}, ${param/pat[/str]},
+ ${!param*}
+ compound array assignment
+ the `!' reserved word
+ loadable builtins -- but ksh uses `builtin' while bash uses `enable'
+ `command', `builtin', `disown' builtins
+ new $'...' and $"..." quoting
+ FIGNORE (but bash uses GLOBIGNORE), HISTCMD
+ set -o notify/-C
+ changes to kill builtin
+ read -A (bash uses read -a)
+ read -t/-d
+ trap -p
+ exec -c/-a
+ `.' restores the positional parameters when it completes
+ POSIX.2 `test'
+ umask -S
+ unalias -a
+ command and arithmetic substitution performed on PS1, PS4, and ENV
+ command name completion
+ ENV processed only for interactive shells
+
+Section D: Why does bash do some things differently than other Unix shells?
+
+D1) Why does bash run a different version of `command' than
+ `which command' says it will?
+
+On many systems, `which' is actually a csh script that assumes
+you're running csh. In tcsh, `which' and its cousin `where'
+are builtins. On other Unix systems, `which' is a perl script
+that uses the PATH environment variable.
+
+The csh script version reads the csh startup files from your
+home directory and uses those to determine which `command' will
+be invoked. Since bash doesn't use any of those startup files,
+there's a good chance that your bash environment differs from
+your csh environment. The bash `type' builtin does everything
+`which' does, and will report correct results for the running
+shell. If you're really wedded to the name `which', try adding
+the following function definition to your .bashrc:
+
+ which()
+ {
+ builtin type "$@"
+ }
+
+If you're moving from tcsh and would like to bring `where' along
+as well, use this function:
+
+ where()
+ {
+ builtin type -a "$@"
+ }
+
+D2) Why doesn't bash treat brace expansions exactly like csh?
+
+The only difference between bash and csh brace expansion is that
+bash requires a brace expression to contain at least one unquoted
+comma if it is to be expanded. Any brace-surrounded word not
+containing an unquoted comma is left unchanged by the brace
+expansion code. This affords the greatest degree of sh
+compatibility.
+
+Bash, ksh, zsh, and pd-ksh all implement brace expansion this way.
+
+D3) Why doesn't bash have csh variable modifiers?
+
+Posix has specified a more powerful, albeit somewhat more cryptic,
+mechanism cribbed from ksh, and bash implements it.
+
+${parameter%word}
+ Remove smallest suffix pattern. The WORD is expanded to produce
+ a pattern. It then expands to the value of PARAMETER, with the
+ smallest portion of the suffix matched by the pattern deleted.
+
+ x=file.c
+ echo ${x%.c}.o
+ -->file.o
+
+${parameter%%word}
+
+ Remove largest suffix pattern. The WORD is expanded to produce
+ a pattern. It then expands to the value of PARAMETER, with the
+ largest portion of the suffix matched by the pattern deleted.
+
+ x=posix/src/std
+ echo ${x%%/*}
+ -->posix
+
+${parameter#word}
+ Remove smallest prefix pattern. The WORD is expanded to produce
+ a pattern. It then expands to the value of PARAMETER, with the
+ smallest portion of the prefix matched by the pattern deleted.
+
+ x=$HOME/src/cmd
+ echo ${x#$HOME}
+ -->/src/cmd
+
+${parameter##word}
+ Remove largest prefix pattern. The WORD is expanded to produce
+ a pattern. It then expands to the value of PARAMETER, with the
+ largest portion of the prefix matched by the pattern deleted.
+
+ x=/one/two/three
+ echo ${x##*/}
+ -->three
+
+
+Given
+ a=/a/b/c/d
+ b=b.xxx
+
+ csh bash result
+ --- ---- ------
+ $a:h ${a%/*} /a/b/c
+ $a:t ${a##*/} d
+ $b:r ${b%.*} b
+ $b:e ${b##*.} xxx
+
+
+D4) How can I make my csh aliases work when I convert to bash?
+
+Bash uses a different syntax to support aliases than csh does.
+The details can be found in the documentation. We have provided
+a shell script which does most of the work of conversion for you;
+this script can be found in ./examples/misc/aliasconv.sh. Here is
+how you use it:
+
+Start csh in the normal way for you. (e.g., `csh')
+
+Pipe the output of `alias' through `aliasconv.sh', saving the
+results into `bash_aliases':
+
+ alias | bash aliasconv.sh >bash_aliases
+
+Edit `bash_aliases', carefully reading through any created
+functions. You will need to change the names of some csh specific
+variables to the bash equivalents. The script converts $cwd to
+$PWD, $term to $TERM, $home to $HOME, $user to $USER, and $prompt
+to $PS1. You may also have to add quotes to avoid unwanted
+expansion.
+
+For example, the csh alias:
+
+ alias cd 'cd \!*; echo $cwd'
+
+is converted to the bash function:
+
+ cd () { command cd "$@"; echo $PWD ; }
+
+The only thing that needs to be done is to quote $PWD:
+
+ cd () { command cd "$@"; echo "$PWD" ; }
+
+Merge the edited file into your ~/.bashrc.
+
+There is an additional, more ambitious, script in
+examples/misc/cshtobash that attempts to convert your entire csh
+environment to its bash equivalent. This script can be run as
+simply `cshtobash' to convert your normal interactive
+environment, or as `cshtobash ~/.login' to convert your login
+environment.
+
+D5) How can I pipe standard output and standard error from one command to
+ another, like csh does with `|&'?
+
+Use
+ command 2>&1 | command2
+
+The key is to remember that piping is performed before redirection, so
+file descriptor 1 points to the pipe when it is duplicated onto file
+descriptor 2.
+
+D6) Now that I've converted from ksh to bash, are there equivalents to
+ ksh features like autoloaded functions and the `whence' command?
+
+There are features in ksh-88 and ksh-93 that do not have direct bash
+equivalents. Most, however, can be emulated with very little trouble.
+
+ksh-88 feature Bash equivalent
+-------------- ---------------
+compiled-in aliases set up aliases in .bashrc; some ksh aliases are
+ bash builtins (hash, history, type)
+coprocesses named pipe pairs (one for read, one for write)
+typeset +f declare -F
+cd, print, whence function substitutes in examples/functions/kshenv
+autoloaded functions examples/functions/autoload is the same as typeset -fu
+read var?prompt read -p prompt var
+
+ksh-93 feature Bash equivalent
+-------------- ---------------
+sleep, getconf Bash has loadable versions in examples/loadables
+${.sh.version} $BASH_VERSION
+print -f printf
+hist alias hist=fc
+$HISTEDIT $FCEDIT
+
+Section E: How can I get bash to do certain things, and why does bash do
+ things the way it does?
+
+E1) Why is the bash builtin `test' slightly different from /bin/test?
+
+The specific example used here is [ ! x -o x ], which is false.
+
+Bash's builtin `test' implements the Posix.2 spec, which can be
+summarized as follows (the wording is due to David Korn):
+
+Here is the set of rules for processing test arguments.
+
+ 0 Args: False
+ 1 Arg: True iff argument is not null.
+ 2 Args: If first arg is !, True iff second argument is null.
+ If first argument is unary, then true if unary test is true
+ Otherwise error.
+ 3 Args: If second argument is a binary operator, do binary test of $1 $3
+ If first argument is !, negate two argument test of $2 $3
+ If first argument is `(' and third argument is `)', do the
+ one-argument test of the second argument.
+ Otherwise error.
+ 4 Args: If first argument is !, negate three argument test of $2 $3 $4.
+ Otherwise unspecified
+ 5 or more Args: unspecified. (Historical shells would use their
+ current algorithm).
+
+The operators -a and -o are considered binary operators for the purpose
+of the 3 Arg case.
+
+As you can see, the test becomes (not (x or x)), which is false.
+
+E2) Why does bash sometimes say `Broken pipe'?
+
+If a sequence of commands appears in a pipeline, and one of the
+reading commands finishes before the writer has finished, the
+writer receives a SIGPIPE signal. Many other shells special-case
+SIGPIPE as an exit status in the pipeline and do not report it.
+For example, in:
+
+ ps -aux | head
+
+`head' can finish before `ps' writes all of its output, and ps
+will try to write on a pipe without a reader. In that case, bash
+will print `Broken pipe' to stderr when ps is killed by a
+SIGPIPE.
+
+You can build a version of bash that will not report SIGPIPE errors
+by uncommenting the definition of DONT_REPORT_SIGPIPE in the file
+config-top.h.
+
+E3) When I have terminal escape sequences in my prompt, why does bash
+ wrap lines at the wrong column?
+
+Readline, the line editing library that bash uses, does not know
+that the terminal escape sequences do not take up space on the
+screen. The redisplay code assumes, unless told otherwise, that
+each character in the prompt is a `printable' character that
+takes up one character position on the screen.
+
+You can use the bash prompt expansion facility (see the PROMPTING
+section in the manual page) to tell readline that sequences of
+characters in the prompt strings take up no screen space.
+
+Use the \[ escape to begin a sequence of non-printing characters,
+and the \] escape to signal the end of such a sequence.
+
+E4) If I pipe the output of a command into `read variable', why doesn't
+ the output show up in $variable when the read command finishes?
+
+This has to do with the parent-child relationship between Unix
+processes. It affects all commands run in pipelines, not just
+simple calls to `read'. For example, piping a command's output
+into a `while' loop that repeatedly calls `read' will result in
+the same behavior.
+
+Each element of a pipeline runs in a separate process, a child of
+the shell running the pipeline. A subprocess cannot affect its
+parent's environment. When the `read' command sets the variable
+to the input, that variable is set only in the subshell, not the
+parent shell. When the subshell exits, the value of the variable
+is lost.
+
+Many pipelines that end with `read variable' can be converted
+into command substitutions, which will capture the output of
+a specified command. The output can then be assigned to a
+variable:
+
+ grep ^gnu /usr/lib/news/active | wc -l | read ngroup
+
+can be converted into
+
+ ngroup=$(grep ^gnu /usr/lib/news/active | wc -l)
+
+This does not, unfortunately, work to split the text among
+multiple variables, as read does when given multiple variable
+arguments. If you need to do this, you can either use the
+command substitution above to read the output into a variable
+and chop up the variable using the bash pattern removal
+expansion operators or use some variant of the following
+approach.
+
+Say /usr/local/bin/ipaddr is the following shell script:
+
+#! /bin/sh
+host `hostname` | awk '/address/ {print $NF}'
+
+Instead of using
+
+ /usr/local/bin/ipaddr | read A B C D
+
+to break the local machine's IP address into separate octets, use
+
+ OIFS="$IFS"
+ IFS=.
+ set -- $(/usr/local/bin/ipaddr)
+ IFS="$OIFS"
+ A="$1" B="$2" C="$3" D="$4"
+
+Beware, however, that this will change the shell's positional
+parameters. If you need them, you should save them before doing
+this.
+
+This is the general approach -- in most cases you will not need to
+set $IFS to a different value.
+
+Some other user-supplied alternatives include:
+
+read A B C D << HERE
+ $(IFS=.; echo $(/usr/local/bin/ipaddr))
+HERE
+
+and, where process substitution is available,
+
+read A B C D < <(IFS=.; echo $(/usr/local/bin/ipaddr))
+
+E5) I have a bunch of shell scripts that use backslash-escaped characters
+ in arguments to `echo'. Bash doesn't interpret these characters. Why
+ not, and how can I make it understand them?
+
+This is the behavior of echo on most Unix System V machines.
+
+The bash builtin `echo' is modeled after the 9th Edition
+Research Unix version of `echo'. It does not interpret
+backslash-escaped characters in its argument strings by default;
+it requires the use of the -e option to enable the
+interpretation. The System V echo provides no way to disable the
+special characters; the bash echo has a -E option to disable
+them.
+
+There is a configuration option that will make bash behave like
+the System V echo and interpret things like `\t' by default. Run
+configure with the --enable-xpg-echo-default option to turn this
+on. Be aware that this will cause some of the tests run when you
+type `make tests' to fail.
+
+There is a shell option, `xpg_echo', settable with `shopt', that will
+change the behavior of echo at runtime. Enabling this option turns
+on expansion of backslash-escape sequences.
+
+E6) Why doesn't a while or for loop get suspended when I type ^Z?
+
+This is a consequence of how job control works on Unix. The only
+thing that can be suspended is the process group. This is a single
+command or pipeline of commands that the shell forks and executes.
+
+When you run a while or for loop, the only thing that the shell forks
+and executes are any commands in the while loop test and commands in
+the loop bodies. These, therefore, are the only things that can be
+suspended when you type ^Z.
+
+If you want to be able to stop the entire loop, you need to put it
+within parentheses, which will force the loop into a subshell that
+may be stopped (and subsequently restarted) as a single unit.
+
+E7) What about empty for loops in Makefiles?
+
+It's fairly common to see constructs like this in automatically-generated
+Makefiles:
+
+SUBDIRS = @SUBDIRS@
+
+ ...
+
+subdirs-clean:
+ for d in ${SUBDIRS}; do \
+ ( cd $$d && ${MAKE} ${MFLAGS} clean ) \
+ done
+
+When SUBDIRS is empty, this results in a command like this being passed to
+bash:
+
+ for d in ; do
+ ( cd $d && ${MAKE} ${MFLAGS} clean )
+ done
+
+In versions of bash before bash-2.05a, this was a syntax error. If the
+reserved word `in' was present, a word must follow it before the semicolon
+or newline. The language in the manual page referring to the list of words
+being empty referred to the list after it is expanded. These versions of
+bash required that there be at least one word following the `in' when the
+construct was parsed.
+
+The idiomatic Makefile solution is something like:
+
+SUBDIRS = @SUBDIRS@
+
+subdirs-clean:
+ subdirs=$SUBDIRS ; for d in $$subdirs; do \
+ ( cd $$d && ${MAKE} ${MFLAGS} clean ) \
+ done
+
+The latest drafts of the updated POSIX standard have changed this: the
+word list is no longer required. Bash versions 2.05a and later accept
+the new syntax.
+
+E8) Why does the arithmetic evaluation code complain about `08'?
+
+The bash arithmetic evaluation code (used for `let', $(()), (()), and in
+other places), interprets a leading `0' in numeric constants as denoting
+an octal number, and a leading `0x' as denoting hexadecimal. This is
+in accordance with the POSIX.2 spec, section 2.9.2.1, which states that
+arithmetic constants should be handled as signed long integers as defined
+by the ANSI/ISO C standard.
+
+The POSIX.2 interpretation committee has confirmed this:
+
+http://www.pasc.org/interps/unofficial/db/p1003.2/pasc-1003.2-173.html
+
+E9) Why does the pattern matching expression [A-Z]* match files beginning
+ with every letter except `z'?
+
+Bash-2.03, Bash-2.05 and later versions honor the current locale setting
+when processing ranges within pattern matching bracket expressions ([A-Z]).
+This is what POSIX.2 and SUSv3/XPG6 specify.
+
+The behavior of the matcher in bash-2.05 and later versions depends on the
+current LC_COLLATE setting. Setting this variable to `C' or `POSIX' will
+result in the traditional behavior ([A-Z] matches all uppercase ASCII
+characters). Many other locales, including the en_US locale (the default
+on many US versions of Linux) collate the upper and lower case letters like
+this:
+
+ AaBb...Zz
+
+which means that [A-Z] matches every letter except `z'. Others collate like
+
+ aAbBcC...zZ
+
+which means that [A-Z] matches every letter except `a'.
+
+The portable way to specify upper case letters is [:upper:] instead of
+A-Z; lower case may be specified as [:lower:] instead of a-z.
+
+Look at the manual pages for setlocale(3), strcoll(3), and, if it is
+present, locale(1). If you have locale(1), you can use it to find
+your current locale information even if you do not have any of the
+LC_ variables set.
+
+My advice is to put
+
+ export LC_COLLATE=C
+
+into /etc/profile and inspect any shell scripts run from cron for
+constructs like [A-Z]. This will prevent things like
+
+ rm [A-Z]*
+
+from removing every file in the current directory except those beginning
+with `z' and still allow individual users to change the collation order.
+Users may put the above command into their own profiles as well, of course.
+
+E10) Why does `cd //' leave $PWD as `//'?
+
+POSIX.2, in its description of `cd', says that *three* or more leading
+slashes may be replaced with a single slash when canonicalizing the
+current working directory.
+
+This is, I presume, for historical compatibility. Certain versions of
+Unix, and early network file systems, used paths of the form
+//hostname/path to access `path' on server `hostname'.
+
+E11) If I resize my xterm while another program is running, why doesn't bash
+ notice the change?
+
+This is another issue that deals with job control.
+
+The kernel maintains a notion of a current terminal process group. Members
+of this process group (processes whose process group ID is equal to the
+current terminal process group ID) receive terminal-generated signals like
+SIGWINCH. (For more details, see the JOB CONTROL section of the bash
+man page.)
+
+If a terminal is resized, the kernel sends SIGWINCH to each member of
+the terminal's current process group (the `foreground' process group).
+
+When bash is running with job control enabled, each pipeline (which may be
+a single command) is run in its own process group, different from bash's
+process group. This foreground process group receives the SIGWINCH; bash
+does not. Bash has no way of knowing that the terminal has been resized.
+
+There is a `checkwinsize' option, settable with the `shopt' builtin, that
+will cause bash to check the window size and adjust its idea of the
+terminal's dimensions each time a process stops or exits and returns control
+of the terminal to bash. Enable it with `shopt -s checkwinsize'.
+
+Section F: Things to watch out for on certain Unix versions
+
+F1) Why can't I use command line editing in my `cmdtool'?
+
+The problem is `cmdtool' and bash fighting over the input. When
+scrolling is enabled in a cmdtool window, cmdtool puts the tty in
+`raw mode' to permit command-line editing using the mouse for
+applications that cannot do it themselves. As a result, bash and
+cmdtool each try to read keyboard input immediately, with neither
+getting enough of it to be useful.
+
+This mode also causes cmdtool to not implement many of the
+terminal functions and control sequences appearing in the
+`sun-cmd' termcap entry. For a more complete explanation, see
+that file examples/suncmd.termcap in the bash distribution.
+
+`xterm' is a better choice, and gets along with bash much more
+smoothly.
+
+If you must use cmdtool, you can use the termcap description in
+examples/suncmd.termcap. Set the TERMCAP variable to the terminal
+description contained in that file, i.e.
+
+TERMCAP='Mu|sun-cmd:am:bs:km:pt:li#34:co#80:cl=^L:ce=\E[K:cd=\E[J:rs=\E[s:'
+
+Then export TERMCAP and start a new cmdtool window from that shell.
+The bash command-line editing should behave better in the new
+cmdtool. If this works, you can put the assignment to TERMCAP
+in your bashrc file.
+
+F2) I built bash on Solaris 2. Why do globbing expansions and filename
+ completion chop off the first few characters of each filename?
+
+This is the consequence of building bash on SunOS 5 and linking
+with the libraries in /usr/ucblib, but using the definitions
+and structures from files in /usr/include.
+
+The actual conflict is between the dirent structure in
+/usr/include/dirent.h and the struct returned by the version of
+`readdir' in libucb.a (a 4.3-BSD style `struct direct').
+
+Make sure you've got /usr/ccs/bin ahead of /usr/ucb in your $PATH
+when configuring and building bash. This will ensure that you
+use /usr/ccs/bin/cc or acc instead of /usr/ucb/cc and that you
+link with libc before libucb.
+
+If you have installed the Sun C compiler, you may also need to
+put /usr/ccs/bin and /opt/SUNWspro/bin into your $PATH before
+/usr/ucb.
+
+F3) Why does bash dump core after I interrupt username completion or
+ `~user' tilde expansion on a machine running NIS?
+
+This is a famous and long-standing bug in the SunOS YP (sorry, NIS)
+client library, which is part of libc.
+
+The YP library code keeps static state -- a pointer into the data
+returned from the server. When YP initializes itself (setpwent),
+it looks at this pointer and calls free on it if it's non-null.
+So far, so good.
+
+If one of the YP functions is interrupted during getpwent (the
+exact function is interpretwithsave()), and returns NULL, the
+pointer is freed without being reset to NULL, and the function
+returns. The next time getpwent is called, it sees that this
+pointer is non-null, calls free, and the bash free() blows up
+because it's being asked to free freed memory.
+
+The traditional Unix mallocs allow memory to be freed multiple
+times; that's probably why this has never been fixed. You can
+run configure with the `--without-gnu-malloc' option to use
+the C library malloc and avoid the problem.
+
+F4) I'm running SVR4.2. Why is the line erased every time I type `@'?
+
+The `@' character is the default `line kill' character in most
+versions of System V, including SVR4.2. You can change this
+character to whatever you want using `stty'. For example, to
+change the line kill character to control-u, type
+
+ stty kill ^U
+
+where the `^' and `U' can be two separate characters.
+
+F5) Why does bash report syntax errors when my C News scripts use a
+ redirection before a subshell command?
+
+The actual command in question is something like
+
+ < file ( command )
+
+According to the grammar given in the POSIX.2 standard, this construct
+is, in fact, a syntax error. Redirections may only precede `simple
+commands'. A subshell construct such as the above is one of the shell's
+`compound commands'. A redirection may only follow a compound command.
+
+This affects the mechanical transformation of commands that use `cat'
+to pipe a file into a command (a favorite Useless-Use-Of-Cat topic on
+comp.unix.shell). While most commands of the form
+
+ cat file | command
+
+can be converted to `< file command', shell control structures such as
+loops and subshells require `command < file'.
+
+The file CWRU/sh-redir-hack in the bash-2.05a distribution is an
+(unofficial) patch to parse.y that will modify the grammar to
+support this construct. It will not apply with `patch'; you must
+modify parse.y by hand. Note that if you apply this, you must
+recompile with -DREDIRECTION_HACK. This introduces a large
+number of reduce/reduce conflicts into the shell grammar.
+
+F6) Why can't I use vi-mode editing on Red Hat Linux 6.1?
+
+The short answer is that Red Hat screwed up.
+
+The long answer is that they shipped an /etc/inputrc that only works
+for emacs mode editing, and then screwed all the vi users by setting
+INPUTRC to /etc/inputrc in /etc/profile.
+
+The short fix is to do one of the following: remove or rename
+/etc/inputrc, set INPUTRC=~/.inputrc in ~/.bashrc (or .bash_profile,
+but make sure you export it if you do), remove the assignment to
+INPUTRC from /etc/profile, add
+
+ set keymap emacs
+
+to the beginning of /etc/inputrc, or bracket the key bindings in
+/etc/inputrc with these lines
+
+ $if mode=emacs
+ [...]
+ $endif
+
+F7) Why do bash-2.05a and bash-2.05b fail to compile `printf.def' on
+ HP/UX 11.x?
+
+HP/UX's support for long double is imperfect at best.
+
+GCC will support it without problems, but the HP C library functions
+like strtold(3) and printf(3) don't actually work with long doubles.
+HP implemented a `long_double' type as a 4-element array of 32-bit
+ints, and that is what the library functions use. The ANSI C
+`long double' type is a 128-bit floating point scalar.
+
+The easiest fix, until HP fixes things up, is to edit the generated
+config.h and #undef the HAVE_LONG_DOUBLE line. After doing that,
+the compilation should complete successfully.
+
+Section G: How can I get bash to do certain common things?
+
+G1) How can I get bash to read and display eight-bit characters?
+
+This is a process requiring several steps.
+
+First, you must ensure that the `physical' data path is a full eight
+bits. For xterms, for example, the `vt100' resources `eightBitInput'
+and `eightBitOutput' should be set to `true'.
+
+Once you have set up an eight-bit path, you must tell the kernel and
+tty driver to leave the eighth bit of characters alone when processing
+keyboard input. Use `stty' to do this:
+
+ stty cs8 -istrip -parenb
+
+For old BSD-style systems, you can use
+
+ stty pass8
+
+You may also need
+
+ stty even odd
+
+Finally, you need to tell readline that you will be inputting and
+displaying eight-bit characters. You use readline variables to do
+this. These variables can be set in your .inputrc or using the bash
+`bind' builtin. Here's an example using `bind':
+
+ bash$ bind 'set convert-meta off'
+ bash$ bind 'set meta-flag on'
+ bash$ bind 'set output-meta on'
+
+The `set' commands between the single quotes may also be placed
+in ~/.inputrc.
+
+G2) How do I write a function `x' to replace builtin command `x', but
+ still invoke the command from within the function?
+
+This is why the `command' and `builtin' builtins exist. The
+`command' builtin executes the command supplied as its first
+argument, skipping over any function defined with that name. The
+`builtin' builtin executes the builtin command given as its first
+argument directly.
+
+For example, to write a function to replace `cd' that writes the
+hostname and current directory to an xterm title bar, use
+something like the following:
+
+ cd()
+ {
+ builtin cd "$@" && xtitle "$HOST: $PWD"
+ }
+
+This could also be written using `command' instead of `builtin';
+the version above is marginally more efficient.
+
+G3) How can I find the value of a shell variable whose name is the value
+ of another shell variable?
+
+Versions of Bash newer than Bash-2.0 support this directly. You can use
+
+ ${!var}
+
+For example, the following sequence of commands will echo `z':
+
+ var1=var2
+ var2=z
+ echo ${!var1}
+
+For sh compatibility, use the `eval' builtin. The important
+thing to remember is that `eval' expands the arguments you give
+it again, so you need to quote the parts of the arguments that
+you want `eval' to act on.
+
+For example, this expression prints the value of the last positional
+parameter:
+
+ eval echo \"\$\{$#\}\"
+
+The expansion of the quoted portions of this expression will be
+deferred until `eval' runs, while the `$#' will be expanded
+before `eval' is executed. In versions of bash later than bash-2.0,
+
+ echo ${!#}
+
+does the same thing.
+
+This is not the same thing as ksh93 `nameref' variables, though the syntax
+is similar. I may add namerefs in a future bash version.
+
+G4) How can I make the bash `time' reserved word print timing output that
+ looks like the output from my system's /usr/bin/time?
+
+The bash command timing code looks for a variable `TIMEFORMAT' and
+uses its value as a format string to decide how to display the
+timing statistics.
+
+The value of TIMEFORMAT is a string with `%' escapes expanded in a
+fashion similar in spirit to printf(3). The manual page explains
+the meanings of the escape sequences in the format string.
+
+If TIMEFORMAT is not set, bash acts as if the following assignment had
+been performed:
+
+ TIMEFORMAT=$'\nreal\t%3lR\nuser\t%3lU\nsys\t%3lS'
+
+The POSIX.2 default time format (used by `time -p command') is
+
+ TIMEFORMAT=$'real %2R\nuser %2U\nsys %2S'
+
+The BSD /usr/bin/time format can be emulated with:
+
+ TIMEFORMAT=$'\t%1R real\t%1U user\t%1S sys'
+
+The System V /usr/bin/time format can be emulated with:
+
+ TIMEFORMAT=$'\nreal\t%1R\nuser\t%1U\nsys\t%1S'
+
+The ksh format can be emulated with:
+
+ TIMEFORMAT=$'\nreal\t%2lR\nuser\t%2lU\nsys\t%2lS'
+
+G5) How do I get the current directory into my prompt?
+
+Bash provides a number of backslash-escape sequences which are expanded
+when the prompt string (PS1 or PS2) is displayed. The full list is in
+the manual page.
+
+The \w expansion gives the full pathname of the current directory, with
+a tilde (`~') substituted for the current value of $HOME. The \W
+expansion gives the basename of the current directory. To put the full
+pathname of the current directory into the path without any tilde
+subsitution, use $PWD. Here are some examples:
+
+ PS1='\w$ ' # current directory with tilde
+ PS1='\W$ ' # basename of current directory
+ PS1='$PWD$ ' # full pathname of current directory
+
+The single quotes are important in the final example to prevent $PWD from
+being expanded when the assignment to PS1 is performed.
+
+G6) How can I rename "*.foo" to "*.bar"?
+
+Use the pattern removal functionality described in D3. The following `for'
+loop will do the trick:
+
+ for f in *.foo; do
+ mv $f ${f%foo}bar
+ done
+
+G7) How can I translate a filename from uppercase to lowercase?
+
+The script examples/functions/lowercase, originally written by John DuBois,
+will do the trick. The converse is left as an exercise.
+
+G8) How can I write a filename expansion (globbing) pattern that will match
+ all files in the current directory except "." and ".."?
+
+You must have set the `extglob' shell option using `shopt -s extglob' to use
+this:
+
+ echo .!(.|) *
+
+A solution that works without extended globbing is given in the Unix Shell
+FAQ, posted periodically to comp.unix.shell.
+
+Section H: Where do I go from here?
+
+H1) How do I report bugs in bash, and where should I look for fixes and
+ advice?
+
+Use the `bashbug' script to report bugs. It is built and
+installed at the same time as bash. It provides a standard
+template for reporting a problem and automatically includes
+information about your configuration and build environment.
+
+`bashbug' sends its reports to bug-bash@gnu.org, which
+is a large mailing list gatewayed to the usenet newsgroup gnu.bash.bug.
+
+Bug fixes, answers to questions, and announcements of new releases
+are all posted to gnu.bash.bug. Discussions concerning bash features
+and problems also take place there.
+
+To reach the bash maintainers directly, send mail to
+bash-maintainers@gnu.org.
+
+H2) What kind of bash documentation is there?
+
+First, look in the doc directory in the bash distribution. It should
+contain at least the following files:
+
+bash.1 an extensive, thorough Unix-style manual page
+builtins.1 a manual page covering just bash builtin commands
+bashref.texi a reference manual in GNU tex`info format
+bashref.info an info version of the reference manual
+FAQ this file
+article.ms text of an article written for The Linux Journal
+readline.3 a man page describing readline
+
+Postscript, HTML, and ASCII files created from the above source are
+available in the documentation distribution.
+
+There is additional documentation available for anonymous FTP from host
+ftp.cwru.edu in the `pub/bash' directory.
+
+Cameron Newham and Bill Rosenblatt have written a book on bash, published
+by O'Reilly and Associates. The book is based on Bill Rosenblatt's Korn
+Shell book. The title is ``Learning the Bash Shell'', and the ISBN number
+is 1-56592-147-X. Look for it in fine bookstores near you. This book
+covers bash-1.14, but has an appendix describing some of the new features
+in bash-2.0.
+
+A second edition of this book is available, published in January, 1998.
+The ISBN number is 1-56592-347-2. Look for it in the same fine bookstores
+or on the web.
+
+The GNU Bash Reference Manual has been published as a printed book by
+Network Theory Ltd (Paperback, ISBN: 0-9541617-7-7, Feb 2003). It covers
+bash-2.0 and is available from most online bookstores (see
+http://www.network-theory.co.uk/bash/manual/ for details). The publisher
+will donate $1 to the Free Software Foundation for each copy sold.
+
+H3) What's coming in future versions?
+
+These are features I hope to include in a future version of bash.
+
+a better bash debugger (a minimally-tested version is included with bash-2.05b)
+associative arrays
+co-processes, but with a new-style syntax that looks like function declaration
+
+H4) What's on the bash `wish list' for future versions?
+
+These are features that may or may not appear in a future version of bash.
+
+breaking some of the shell functionality into embeddable libraries
+a module system like zsh's, using dynamic loading like builtins
+better internationalization using GNU `gettext'
+date-stamped command history
+a bash programmer's guide with a chapter on creating loadable builtins
+a better loadable interface to perl with access to the shell builtins and
+ variables (contributions gratefully accepted)
+ksh93-like `nameref' variables
+ksh93-like `+=' variable assignment operator
+ksh93-like `xx.yy' variables (including some of the .sh.* variables) and
+ associated disipline functions
+Some of the new ksh93 pattern matching operators, like backreferencing
+
+H5) When will the next release appear?
+
+The next version will appear sometime in 2002. Never make predictions.
+
+
+This document is Copyright 1995-2003 by Chester Ramey.
+
+Permission is hereby granted, without written agreement and
+without license or royalty fees, to use, copy, and distribute
+this document for any purpose, provided that the above copyright
+notice appears in all copies of this document and that the
+contents of this document remain unaltered.
--- /dev/null
+#
+# Simple makefile for the sample loadable builtins
+#
+# Copyright (C) 1996 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111 USA.
+
+# Include some boilerplate Gnu makefile definitions.
+prefix = @prefix@
+
+exec_prefix = @exec_prefix@
+bindir = @bindir@
+libdir = @libdir@
+infodir = @infodir@
+includedir = @includedir@
+
+topdir = @top_srcdir@
+BUILD_DIR = @BUILD_DIR@
+srcdir = @srcdir@
+VPATH = .:@srcdir@
+
+@SET_MAKE@
+CC = @CC@
+RM = rm -f
+
+SHELL = @MAKE_SHELL@
+
+host_os = @host_os@
+host_cpu = @host_cpu@
+host_vendor = @host_vendor@
+
+CFLAGS = @CFLAGS@
+LOCAL_CFLAGS = @LOCAL_CFLAGS@
+DEFS = @DEFS@
+LOCAL_DEFS = @LOCAL_DEFS@
+
+CPPFLAGS = @CPPFLAGS@
+
+BASHINCDIR = ${topdir}/include
+
+LIBBUILD = ${BUILD_DIR}/lib
+
+INTL_LIBSRC = ${topdir}/lib/intl
+INTL_BUILDDIR = ${LIBBUILD}/intl
+INTL_INC = @INTL_INC@
+LIBINTL_H = @LIBINTL_H@
+
+CCFLAGS = $(DEFS) $(LOCAL_DEFS) $(LOCAL_CFLAGS) $(CFLAGS)
+
+#
+# These values are generated for configure by ${topdir}/support/shobj-conf.
+# If your system is not supported by that script, but includes facilities for
+# dynamic loading of shared objects, please update the script and send the
+# changes to bash-maintainers@gnu.org.
+#
+SHOBJ_CC = @SHOBJ_CC@
+SHOBJ_CFLAGS = @SHOBJ_CFLAGS@
+SHOBJ_LD = @SHOBJ_LD@
+SHOBJ_LDFLAGS = @SHOBJ_LDFLAGS@
+SHOBJ_XLDFLAGS = @SHOBJ_XLDFLAGS@
+SHOBJ_LIBS = @SHOBJ_LIBS@
+SHOBJ_STATUS = @SHOBJ_STATUS@
+
+INC = -I. -I.. -I$(topdir) -I$(topdir)/lib -I$(topdir)/builtins \
+ -I$(BASHINCDIR) -I$(BUILD_DIR) -I$(LIBBUILD) \
+ -I$(BUILD_DIR)/builtins $(INTL_INC)
+
+.c.o:
+ $(SHOBJ_CC) $(SHOBJ_CFLAGS) $(CCFLAGS) $(INC) -c -o $@ $<
+
+
+ALLPROG = print truefalse sleep pushd finfo logname basename dirname \
+ tty pathchk tee head mkdir rmdir printenv id whoami \
+ uname sync push ln unlink cut realpath getconf strftime
+OTHERPROG = necho hello cat
+
+all: $(SHOBJ_STATUS)
+
+supported: $(ALLPROG)
+others: $(OTHERPROG)
+
+unsupported:
+ @echo "Your system (${host_os}) is not supported by the"
+ @echo "${topdir}/support/shobj-conf script."
+ @echo "If your operating system provides facilities for dynamic"
+ @echo "loading of shared objects using the dlopen(3) interface,"
+ @echo "please update the script and re-run configure.
+ @echo "Please send the changes you made to bash-maintainers@gnu.org"
+ @echo "for inclusion in future bash releases."
+
+everything: supported others
+
+print: print.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ print.o $(SHOBJ_LIBS)
+
+necho: necho.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ necho.o $(SHOBJ_LIBS)
+
+getconf: getconf.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ getconf.o $(SHOBJ_LIBS)
+
+hello: hello.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ hello.o $(SHOBJ_LIBS)
+
+truefalse: truefalse.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ truefalse.o $(SHOBJ_LIBS)
+
+sleep: sleep.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ sleep.o $(SHOBJ_LIBS)
+
+finfo: finfo.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ finfo.o $(SHOBJ_LIBS)
+
+cat: cat.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ cat.o $(SHOBJ_LIBS)
+
+logname: logname.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ logname.o $(SHOBJ_LIBS)
+
+basename: basename.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ basename.o $(SHOBJ_LIBS)
+
+dirname: dirname.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ dirname.o $(SHOBJ_LIBS)
+
+tty: tty.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ tty.o $(SHOBJ_LIBS)
+
+pathchk: pathchk.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ pathchk.o $(SHOBJ_LIBS)
+
+tee: tee.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ tee.o $(SHOBJ_LIBS)
+
+mkdir: mkdir.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ mkdir.o $(SHOBJ_LIBS)
+
+rmdir: rmdir.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ rmdir.o $(SHOBJ_LIBS)
+
+head: head.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ head.o $(SHOBJ_LIBS)
+
+printenv: printenv.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ printenv.o $(SHOBJ_LIBS)
+
+id: id.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ id.o $(SHOBJ_LIBS)
+
+whoami: whoami.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ whoami.o $(SHOBJ_LIBS)
+
+uname: uname.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ uname.o $(SHOBJ_LIBS)
+
+sync: sync.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ sync.o $(SHOBJ_LIBS)
+
+push: push.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ push.o $(SHOBJ_LIBS)
+
+ln: ln.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ ln.o $(SHOBJ_LIBS)
+
+unlink: unlink.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ unlink.o $(SHOBJ_LIBS)
+
+cut: cut.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ cut.o $(SHOBJ_LIBS)
+
+realpath: realpath.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ realpath.o $(SHOBJ_LIBS)
+
+strftime: strftime.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ strftime.o $(SHOBJ_LIBS)
+
+# pushd is a special case. We use the same source that the builtin version
+# uses, with special compilation options.
+#
+pushd.c: ${topdir}/builtins/pushd.def
+ $(RM) $@
+ ${BUILD_DIR}/builtins/mkbuiltins -D ${topdir}/builtins ${topdir}/builtins/pushd.def
+
+pushd.o: pushd.c
+ $(RM) $@
+ $(SHOBJ_CC) -DHAVE_CONFIG_H -DPUSHD_AND_POPD -DLOADABLE_BUILTIN $(SHOBJ_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(INC) -c -o $@ $<
+
+pushd: pushd.o
+ $(SHOBJ_LD) $(SHOBJ_LDFLAGS) $(SHOBJ_XLDFLAGS) -o $@ pushd.o $(SHOBJ_LIBS)
+
+clean:
+ $(RM) $(ALLPROG) $(OTHERPROG) *.o
+ -( cd perl && ${MAKE} ${MFLAGS} $@ )
+
+mostlyclean: clean
+ -( cd perl && ${MAKE} ${MFLAGS} $@ )
+
+distclean maintainer-clean: clean
+ $(RM) Makefile pushd.c
+ -( cd perl && ${MAKE} ${MFLAGS} $@ )
+
+print.o: print.c
+truefalse.o: truefalse.c
+sleep.o: sleep.c
+finfo.o: finfo.c
+logname.o: logname.c
+basename.o: basename.c
+dirname.o: dirname.c
+tty.o: tty.c
+pathchk.o: pathchk.c
+tee.o: tee.c
+head.o: head.c
+rmdir.o: rmdir.c
+necho.o: necho.c
+getconf.o: getconf.c
+hello.o: hello.c
+cat.o: cat.c
+printenv.o: printenv.c
+id.o: id.c
+whoami.o: whoami.c
+uname.o: uname.c
+sync.o: sync.c
+push.o: push.c
+mkdir.o: mkdir.c
+realpath.o: realpath.c
+strftime.o: strftime.c
/* A sort of function nesting level counter */
int funcnest = 0;
-int funcnest_max = 0; /* XXX - bash-4.2 */
+int funcnest_max = 0; /* bash-4.2 */
int lastpipe_opt = 0;
close_pipes (pipe_in, pipe_out);
#if defined (PROCESS_SUBSTITUTION) && defined (HAVE_DEV_FD)
/* Close /dev/fd file descriptors in the parent after forking the
- last child in a (possibly one-element) pipeline. */
- if (pipe_out == NO_PIPE) /* XXX */
+ last child in a (possibly one-element) pipeline. Defer this
+ until any running shell function completes. */
+ if (pipe_out == NO_PIPE && variable_context == 0) /* XXX */
unlink_fifo_list (); /* XXX */
#endif
command_line = (char *)NULL; /* don't free this. */
--- /dev/null
+# This makefile for Readline library documentation is in -*- text -*- mode.
+# Emacs likes it that way.
+RM = rm -f
+
+MAKEINFO = makeinfo
+TEXI2DVI = texi2dvi
+TEXI2HTML = texi2html
+QUIETPS = #set this to -q to shut up dvips
+DVIPS = dvips -D 300 $(QUIETPS) -o $@ # tricky
+
+INSTALL_DATA = cp
+infodir = /usr/local/info
+
+RLSRC = rlman.texinfo rluser.texinfo rltech.texinfo
+HISTSRC = hist.texinfo hsuser.texinfo hstech.texinfo
+
+DVIOBJ = readline.dvi history.dvi
+INFOOBJ = readline.info history.info
+PSOBJ = readline.ps history.ps
+HTMLOBJ = readline.html history.html
+
+all: info dvi html ps
+nodvi: info html
+
+readline.dvi: $(RLSRC)
+ $(TEXI2DVI) rlman.texinfo
+ mv rlman.dvi readline.dvi
+
+readline.info: $(RLSRC)
+ $(MAKEINFO) --no-split -o $@ rlman.texinfo
+
+history.dvi: ${HISTSRC}
+ $(TEXI2DVI) hist.texinfo
+ mv hist.dvi history.dvi
+
+history.info: ${HISTSRC}
+ $(MAKEINFO) --no-split -o $@ hist.texinfo
+
+readline.ps: readline.dvi
+ $(RM) $@
+ $(DVIPS) readline.dvi
+
+history.ps: history.dvi
+ $(RM) $@
+ $(DVIPS) history.dvi
+
+readline.html: ${RLSRC}
+ $(TEXI2HTML) rlman.texinfo
+ sed -e 's:rlman.html:readline.html:' -e 's:rlman_toc.html:readline_toc.html:' rlman.html > readline.html
+ sed -e 's:rlman.html:readline.html:' -e 's:rlman_toc.html:readline_toc.html:' rlman_toc.html > readline_toc.html
+ $(RM) rlman.html rlman_toc.html
+
+history.html: ${HISTSRC}
+ $(TEXI2HTML) hist.texinfo
+ sed -e 's:hist.html:history.html:' -e 's:hist_toc.html:history_toc.html:' hist.html > history.html
+ sed -e 's:hist.html:history.html:' -e 's:hist_toc.html:history_toc.html:' hist_toc.html > history_toc.html
+ $(RM) hist.html hist_toc.html
+
+info: $(INFOOBJ)
+dvi: $(DVIOBJ)
+ps: $(PSOBJ)
+html: $(HTMLOBJ)
+
+clean:
+ $(RM) *.aux *.cp *.fn *.ky *.log *.pg *.toc *.tp *.vr *.cps *.pgs \
+ *.fns *.kys *.tps *.vrs *.o core
+
+distclean: clean
+mostlyclean: clean
+
+maintainer-clean: clean
+ $(RM) *.dvi *.info *.info-* *.ps *.html
+
+install: info
+ ${INSTALL_DATA} readline.info $(infodir)/readline.info
+ ${INSTALL_DATA} history.info $(infodir)/history.info
# Set of available languages.
-en@quot en@boldquot af bg ca cs da de eo es et fi fr ga gl hr hu id it ja lt nl pl pt_BR ro ru sk sl sv tr uk vi zh_CN zh_TW
+en@quot en@boldquot af bg ca cs da de el eo es et fi fr ga gl hr hu id it ja lt nl pl pt_BR ro ru sk sl sv tr uk vi zh_CN zh_TW
--- /dev/null
+# translation of bash to Greek
+# Copyright (C) 2013 Free Software Foundation, Inc.
+# This file is distributed under the same license as the bash package.
+#
+# Lefteris Dimitroulakis <ledimitro@gmail.com>, 2013.
+msgid ""
+msgstr ""
+"Project-Id-Version: bash-4.3-pre2\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2013-03-08 16:00-0500\n"
+"PO-Revision-Date: 2013-11-15 10:37+0200\n"
+"Last-Translator: Lefteris Dimitroulakis <ledimitro@gmail.com>\n"
+"Language-Team: Greek <team@lists.gnome.gr>\n"
+"Language: el\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"X-Generator: Lokalize 1.5\n"
+
+#: arrayfunc.c:51
+msgid "bad array subscript"
+msgstr ""
+
+#: arrayfunc.c:356 builtins/declare.def:578
+#, c-format
+msgid "%s: cannot convert indexed to associative array"
+msgstr ""
+
+#: arrayfunc.c:539
+#, c-format
+msgid "%s: invalid associative array key"
+msgstr ""
+
+#: arrayfunc.c:541
+#, c-format
+msgid "%s: cannot assign to non-numeric index"
+msgstr ""
+
+#: arrayfunc.c:586
+#, c-format
+msgid "%s: %s: must use subscript when assigning associative array"
+msgstr ""
+
+#: bashhist.c:388
+#, c-format
+msgid "%s: cannot create: %s"
+msgstr "%s: αδυναμία δημιουργίας: %s"
+
+#: bashline.c:3923
+msgid "bash_execute_unix_command: cannot find keymap for command"
+msgstr "bash_execute_unix_command: δεν μπορώ να βρω keymap για εντολή"
+
+#: bashline.c:4010
+#, c-format
+msgid "%s: first non-whitespace character is not `\"'"
+msgstr "%s: ο πρώτος μη-λευκό διάστημα χαρακτήρας δεν είναι «\"»"
+
+#: bashline.c:4039
+#, c-format
+msgid "no closing `%c' in %s"
+msgstr ""
+
+#: bashline.c:4073
+#, c-format
+msgid "%s: missing colon separator"
+msgstr ""
+
+#: builtins/alias.def:132
+#, c-format
+msgid "`%s': invalid alias name"
+msgstr "«%s»: μη έγκυρο ψευδώνημο"
+
+#: builtins/bind.def:123 builtins/bind.def:126
+msgid "line editing not enabled"
+msgstr "μη ενεργοποιημένο line editing"
+
+#: builtins/bind.def:212
+#, c-format
+msgid "`%s': invalid keymap name"
+msgstr "«%s»: μη έγκυρο όνομα keymap"
+
+#: builtins/bind.def:251
+#, c-format
+msgid "%s: cannot read: %s"
+msgstr "%s: αδυναμία ανάγνωσης: %s"
+
+#: builtins/bind.def:266
+#, c-format
+msgid "`%s': cannot unbind"
+msgstr "«%s»: αδυναμία αποσύνδεσης"
+
+#: builtins/bind.def:304 builtins/bind.def:334
+#, c-format
+msgid "`%s': unknown function name"
+msgstr "«%s»: άγνωστο όνομα συνάρτησης"
+
+#: builtins/bind.def:312
+#, c-format
+msgid "%s is not bound to any keys.\n"
+msgstr "%s δεν έχει συνδεθεί με κανένα πλήκτρο.\n"
+
+#: builtins/bind.def:316
+#, c-format
+msgid "%s can be invoked via "
+msgstr "%s μπορεί να κληθεί μέσω "
+
+#: builtins/break.def:77 builtins/break.def:117
+msgid "loop count"
+msgstr "αριθμός βρόχων"
+
+#: builtins/break.def:137
+msgid "only meaningful in a `for', `while', or `until' loop"
+msgstr "έχει μόνο νόημα σε ένα βρόχο «for», «while», ή «until»"
+
+#: builtins/caller.def:133
+msgid ""
+"Returns the context of the current subroutine call.\n"
+" \n"
+" Without EXPR, returns "
+msgstr ""
+
+#: builtins/cd.def:239
+msgid "HOME not set"
+msgstr "HOME δεν έχει οριστεί"
+
+#: builtins/cd.def:247 builtins/common.c:166 test.c:855
+msgid "too many arguments"
+msgstr "πάρα πολλά ορίσματα"
+
+#: builtins/cd.def:258
+msgid "OLDPWD not set"
+msgstr "OLDPWD δεν έχει οριστεί"
+
+#: builtins/common.c:101
+#, c-format
+msgid "line %d: "
+msgstr "γραμμή %d: "
+
+#: builtins/common.c:139 error.c:265
+#, c-format
+msgid "warning: "
+msgstr "προειδοποίηση: "
+
+#: builtins/common.c:153
+#, c-format
+msgid "%s: usage: "
+msgstr "%s: χρήση: "
+
+#: builtins/common.c:191 shell.c:506 shell.c:788
+#, c-format
+msgid "%s: option requires an argument"
+msgstr "%s: η επιλογή απαιτεί όρισμα"
+
+#: builtins/common.c:198
+#, c-format
+msgid "%s: numeric argument required"
+msgstr "%s: απαιτείται αριθμητικό όρισμα"
+
+#: builtins/common.c:205
+#, c-format
+msgid "%s: not found"
+msgstr "%s: δεν βρέθηκε"
+
+#: builtins/common.c:214 shell.c:801
+#, c-format
+msgid "%s: invalid option"
+msgstr "%s: μη έγκυρη επιλογή"
+
+#: builtins/common.c:221
+#, c-format
+msgid "%s: invalid option name"
+msgstr "%s: μη έγκυρο όνομα επιλογής"
+
+#: builtins/common.c:228 general.c:234 general.c:239
+#, c-format
+msgid "`%s': not a valid identifier"
+msgstr ""
+
+#: builtins/common.c:238
+msgid "invalid octal number"
+msgstr "μη έγκυρος οκταδικός αριθμός"
+
+#: builtins/common.c:240
+msgid "invalid hex number"
+msgstr "μη έγκυρος εξαδικός αριθμός"
+
+#: builtins/common.c:242 expr.c:1451
+msgid "invalid number"
+msgstr "μη έγκυρος αριθμός"
+
+#: builtins/common.c:250
+#, c-format
+msgid "%s: invalid signal specification"
+msgstr "%s: μη έγκυρη προδιαγραφή σήματος"
+
+#: builtins/common.c:257
+#, c-format
+msgid "`%s': not a pid or valid job spec"
+msgstr "«%s»: όχι pid ή έγκυρο job spec"
+
+#: builtins/common.c:264 error.c:458
+#, c-format
+msgid "%s: readonly variable"
+msgstr "%s: μεταβλητή μόνο για ανάγνωση"
+
+#: builtins/common.c:272
+#, c-format
+msgid "%s: %s out of range"
+msgstr "%s: %s εκτός ορίων"
+
+#: builtins/common.c:272 builtins/common.c:274
+msgid "argument"
+msgstr "όρισμα"
+
+#: builtins/common.c:274
+#, c-format
+msgid "%s out of range"
+msgstr "%s εκτός ορίων"
+
+#: builtins/common.c:282
+#, c-format
+msgid "%s: no such job"
+msgstr "%s: δεν υπάρχει τέτοια εργασία"
+
+#: builtins/common.c:290
+#, c-format
+msgid "%s: no job control"
+msgstr ""
+
+#: builtins/common.c:292
+msgid "no job control"
+msgstr ""
+
+#: builtins/common.c:302
+#, c-format
+msgid "%s: restricted"
+msgstr ""
+
+#: builtins/common.c:304
+msgid "restricted"
+msgstr ""
+
+#: builtins/common.c:312
+#, c-format
+msgid "%s: not a shell builtin"
+msgstr ""
+
+#: builtins/common.c:321
+#, c-format
+msgid "write error: %s"
+msgstr "σφάλμα εγγραφής: %s"
+
+#: builtins/common.c:329
+#, c-format
+msgid "error setting terminal attributes: %s"
+msgstr ""
+
+#: builtins/common.c:331
+#, c-format
+msgid "error getting terminal attributes: %s"
+msgstr ""
+
+#: builtins/common.c:563
+#, c-format
+msgid "%s: error retrieving current directory: %s: %s\n"
+msgstr ""
+
+#: builtins/common.c:629 builtins/common.c:631
+#, c-format
+msgid "%s: ambiguous job spec"
+msgstr "%s: ασαφείς προδιαγραφές εργασίας"
+
+#: builtins/complete.def:277
+#, c-format
+msgid "%s: invalid action name"
+msgstr "%s: μη έγκυρο όνομα ενέργειας"
+
+#: builtins/complete.def:450 builtins/complete.def:645
+#: builtins/complete.def:855
+#, c-format
+msgid "%s: no completion specification"
+msgstr "%s: δεν υπάρχει προδιαγραφή συμπλήρωσης"
+
+#: builtins/complete.def:697
+msgid "warning: -F option may not work as you expect"
+msgstr "προειδοποίηση: η επιλογή -F μπορεί να μη δουλέψει όπως περιμένεις"
+
+#: builtins/complete.def:699
+msgid "warning: -C option may not work as you expect"
+msgstr "προειδοποίηση: η επιλογή -C ίσως δεν δουλέψει όπως αναμένετε"
+
+#: builtins/complete.def:828
+msgid "not currently executing completion function"
+msgstr ""
+
+#: builtins/declare.def:126
+msgid "can only be used in a function"
+msgstr "μπορεί να χρησιμοποιηθεί μόνο μέσα σε συνάρτηση"
+
+#: builtins/declare.def:311 builtins/declare.def:526
+#, c-format
+msgid "%s: reference variable cannot be an array"
+msgstr ""
+
+#: builtins/declare.def:317
+#, c-format
+msgid "%s: nameref variable self references not allowed"
+msgstr ""
+
+#: builtins/declare.def:415
+msgid "cannot use `-f' to make functions"
+msgstr "η επιλογή «-f» δεν μπορεί να χρησιμοποιηθεί για τη δημιουργία συναρτήσεων"
+
+#: builtins/declare.def:427 execute_cmd.c:5315
+#, c-format
+msgid "%s: readonly function"
+msgstr "%s: συνάρτηση μόνο για ανάγνωση"
+
+#: builtins/declare.def:565
+#, c-format
+msgid "%s: cannot destroy array variables in this way"
+msgstr ""
+
+#: builtins/declare.def:572 builtins/read.def:721
+#, c-format
+msgid "%s: cannot convert associative to indexed array"
+msgstr ""
+
+#: builtins/enable.def:137 builtins/enable.def:145
+msgid "dynamic loading not available"
+msgstr "δυναμική φόρτωση μη διαθέσημη"
+
+#: builtins/enable.def:312
+#, c-format
+msgid "cannot open shared object %s: %s"
+msgstr "αδυναμία ανοίγματος κοινόχρηστου αντικειμένου %s: %s"
+
+#: builtins/enable.def:335
+#, c-format
+msgid "cannot find %s in shared object %s: %s"
+msgstr "αδυναμία εύρεσης %s στο κοινόχρηστο αντικείμενο %s: %s"
+
+#: builtins/enable.def:459
+#, c-format
+msgid "%s: not dynamically loaded"
+msgstr "%s: δεν φορτώθηκε δυναμικά"
+
+#: builtins/enable.def:474
+#, c-format
+msgid "%s: cannot delete: %s"
+msgstr "%s: αδυναμία διαγραφής: %s"
+
+#: builtins/evalfile.c:140 builtins/hash.def:171 execute_cmd.c:5162
+#: shell.c:1481
+#, c-format
+msgid "%s: is a directory"
+msgstr "%s: είναι κατάλογος"
+
+#: builtins/evalfile.c:146
+#, c-format
+msgid "%s: not a regular file"
+msgstr "%s: όχι κανονικό αρχείο"
+
+#: builtins/evalfile.c:155
+#, c-format
+msgid "%s: file is too large"
+msgstr "%s: αρχείο πολύ μεγάλο"
+
+#: builtins/evalfile.c:190 builtins/evalfile.c:208 shell.c:1491
+#, c-format
+msgid "%s: cannot execute binary file"
+msgstr "%s: αδυναμία εκτέλεσης δυαδικού αρχείου"
+
+#: builtins/exec.def:154 builtins/exec.def:156 builtins/exec.def:228
+#, c-format
+msgid "%s: cannot execute: %s"
+msgstr "%s: αδυναμία εκτέλεσης: %s"
+
+#: builtins/exit.def:65
+#, c-format
+msgid "logout\n"
+msgstr "logout\n"
+
+#: builtins/exit.def:88
+msgid "not login shell: use `exit'"
+msgstr "όχι login shell: χρησιμοποίησε «exit»"
+
+#: builtins/exit.def:120
+#, c-format
+msgid "There are stopped jobs.\n"
+msgstr "Υπάρχουν σταματημένες εργασίες.\n"
+
+#: builtins/exit.def:122
+#, c-format
+msgid "There are running jobs.\n"
+msgstr "Υπάρχουν εργασίες που τρέχουν.\n"
+
+#: builtins/fc.def:262
+msgid "no command found"
+msgstr "δεν βρέθηκε εντολή"
+
+#: builtins/fc.def:312 builtins/fc.def:359
+msgid "history specification"
+msgstr "history specification"
+
+#: builtins/fc.def:380
+#, c-format
+msgid "%s: cannot open temp file: %s"
+msgstr "%s: αδυναμία ανοίγματος προσωρινού αρχείου: %s"
+
+#: builtins/fg_bg.def:149 builtins/jobs.def:282
+msgid "current"
+msgstr "τρέχων"
+
+#: builtins/fg_bg.def:158
+#, c-format
+msgid "job %d started without job control"
+msgstr ""
+
+#: builtins/getopt.c:110
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr "%s: μη επιτρεπόμενη επιλογή -- %c\n"
+
+#: builtins/getopt.c:111
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr "%s: η επιλογή απαιτεί ένα όρισμα -- %c\n"
+
+#: builtins/hash.def:92
+msgid "hashing disabled"
+msgstr ""
+
+#: builtins/hash.def:138
+#, c-format
+msgid "%s: hash table empty\n"
+msgstr ""
+
+#: builtins/hash.def:245
+#, c-format
+msgid "hits\tcommand\n"
+msgstr "hits\tcommand\n"
+
+#: builtins/help.def:130
+#, c-format
+msgid "Shell commands matching keyword `"
+msgid_plural "Shell commands matching keywords `"
+msgstr[0] "Εντολές κελύφους που ταιριάζουν στη λέξη-κλειδί `"
+msgstr[1] "Εντολές κελύφους που ταιριάζουν στις λέξεις-κλειδί"
+
+#: builtins/help.def:168
+#, c-format
+msgid "no help topics match `%s'. Try `help help' or `man -k %s' or `info %s'."
+msgstr "ουδεμία βοήθεια ταιριάζει με «%s». Δοκιμάστε «help help» ή «man -k %s» ή «info %s»."
+
+#: builtins/help.def:185
+#, c-format
+msgid "%s: cannot open: %s"
+msgstr "%s: αδυναμία ανοίγματος: %s"
+
+#: builtins/help.def:471
+#, c-format
+msgid ""
+"These shell commands are defined internally. Type `help' to see this list.\n"
+"Type `help name' to find out more about the function `name'.\n"
+"Use `info bash' to find out more about the shell in general.\n"
+"Use `man -k' or `info' to find out more about commands not in this list.\n"
+"\n"
+"A star (*) next to a name means that the command is disabled.\n"
+"\n"
+msgstr ""
+
+#: builtins/history.def:154
+msgid "cannot use more than one of -anrw"
+msgstr "δεν μπορώ να χρησιμοποιήσω περισσότερες της μιας από τις -anrw"
+
+#: builtins/history.def:186
+msgid "history position"
+msgstr "θέση στο ιστορικό"
+
+#: builtins/history.def:366
+#, c-format
+msgid "%s: history expansion failed"
+msgstr ""
+
+#: builtins/inlib.def:71
+#, c-format
+msgid "%s: inlib failed"
+msgstr "%s: αποτυχία inlib"
+
+#: builtins/jobs.def:109
+msgid "no other options allowed with `-x'"
+msgstr "δεν επιτρέπονται άλλες επιλογές με την «-x»"
+
+#: builtins/kill.def:200
+#, c-format
+msgid "%s: arguments must be process or job IDs"
+msgstr "%s: ορίσματα πρέπει να είναι ID διεργασιών ή εργασιών"
+
+#: builtins/kill.def:263
+msgid "Unknown error"
+msgstr "Άγνωστο σφάλμα"
+
+#: builtins/let.def:95 builtins/let.def:120 expr.c:586 expr.c:601
+msgid "expression expected"
+msgstr "αναμενόταν έκφραση"
+
+#: builtins/mapfile.def:172
+#, c-format
+msgid "%s: not an indexed array"
+msgstr "%s: μη δικτοδοτημένος πίνακας"
+
+#: builtins/mapfile.def:259 builtins/read.def:302
+#, c-format
+msgid "%s: invalid file descriptor specification"
+msgstr "%s: μη έγκυρη προδιαγραφή περιγραφέα αρχείου"
+
+#: builtins/mapfile.def:267 builtins/read.def:309
+#, c-format
+msgid "%d: invalid file descriptor: %s"
+msgstr "%d: μη έγκυρος περιγραφέας αρχείου: %s"
+
+#: builtins/mapfile.def:276 builtins/mapfile.def:314
+#, c-format
+msgid "%s: invalid line count"
+msgstr "%s: μη έγκυρος αριθμός γραμμής"
+
+#: builtins/mapfile.def:287
+#, c-format
+msgid "%s: invalid array origin"
+msgstr ""
+
+#: builtins/mapfile.def:304
+#, c-format
+msgid "%s: invalid callback quantum"
+msgstr ""
+
+#: builtins/mapfile.def:336
+msgid "empty array variable name"
+msgstr ""
+
+#: builtins/mapfile.def:357
+msgid "array variable support required"
+msgstr "απαιτείται υποστήριξη μεταβλητής πίνακος"
+
+#: builtins/printf.def:402
+#, c-format
+msgid "`%s': missing format character"
+msgstr "«%s»: απουσία χαρακτήρα φορμαρίσματος "
+
+#: builtins/printf.def:456
+#, c-format
+msgid "`%c': invalid time format specification"
+msgstr "«%c»: μη έγκυρη προδιαγραφή για φορμά χρόνου"
+
+#: builtins/printf.def:658
+#, c-format
+msgid "`%c': invalid format character"
+msgstr "«%c»: μη έγκυρος χαρακτήρας φορμαρίσματος"
+
+#: builtins/printf.def:684
+#, c-format
+msgid "warning: %s: %s"
+msgstr "προειδοποίηση: %s: %s"
+
+#: builtins/printf.def:865
+msgid "missing hex digit for \\x"
+msgstr "απουσία hex ψηφίου για \\x"
+
+#: builtins/printf.def:880
+#, c-format
+msgid "missing unicode digit for \\%c"
+msgstr "απουσία ψηφίου unicode για \\%c"
+
+#: builtins/pushd.def:195
+msgid "no other directory"
+msgstr "όχι άλλος κατάλογος"
+
+#: builtins/pushd.def:354
+#, c-format
+msgid "%s: invalid argument"
+msgstr "%s: μη έγκυρο όρισμα"
+
+#: builtins/pushd.def:468
+msgid "<no current directory>"
+msgstr "<όχι τρέχων κατάλογος>"
+
+#: builtins/pushd.def:512
+msgid "directory stack empty"
+msgstr "κενή στίβα καταλόγου"
+
+#: builtins/pushd.def:514
+msgid "directory stack index"
+msgstr "δείκτης στοίβας καταλόγου"
+
+#: builtins/pushd.def:689
+msgid ""
+"Display the list of currently remembered directories. Directories\n"
+" find their way onto the list with the `pushd' command; you can get\n"
+" back up through the list with the `popd' command.\n"
+" \n"
+" Options:\n"
+" -c\tclear the directory stack by deleting all of the elements\n"
+" -l\tdo not print tilde-prefixed versions of directories relative\n"
+" \tto your home directory\n"
+" -p\tprint the directory stack with one entry per line\n"
+" -v\tprint the directory stack with one entry per line prefixed\n"
+" \twith its position in the stack\n"
+" \n"
+" Arguments:\n"
+" +N\tDisplays the Nth entry counting from the left of the list shown by\n"
+" \tdirs when invoked without options, starting with zero.\n"
+" \n"
+" -N\tDisplays the Nth entry counting from the right of the list shown by\n"
+"\tdirs when invoked without options, starting with zero."
+msgstr ""
+
+#: builtins/pushd.def:711
+msgid ""
+"Adds a directory to the top of the directory stack, or rotates\n"
+" the stack, making the new top of the stack the current working\n"
+" directory. With no arguments, exchanges the top two directories.\n"
+" \n"
+" Options:\n"
+" -n\tSuppresses the normal change of directory when adding\n"
+" \tdirectories to the stack, so only the stack is manipulated.\n"
+" \n"
+" Arguments:\n"
+" +N\tRotates the stack so that the Nth directory (counting\n"
+" \tfrom the left of the list shown by `dirs', starting with\n"
+" \tzero) is at the top.\n"
+" \n"
+" -N\tRotates the stack so that the Nth directory (counting\n"
+" \tfrom the right of the list shown by `dirs', starting with\n"
+" \tzero) is at the top.\n"
+" \n"
+" dir\tAdds DIR to the directory stack at the top, making it the\n"
+" \tnew current working directory.\n"
+" \n"
+" The `dirs' builtin displays the directory stack."
+msgstr ""
+
+#: builtins/pushd.def:736
+msgid ""
+"Removes entries from the directory stack. With no arguments, removes\n"
+" the top directory from the stack, and changes to the new top directory.\n"
+" \n"
+" Options:\n"
+" -n\tSuppresses the normal change of directory when removing\n"
+" \tdirectories from the stack, so only the stack is manipulated.\n"
+" \n"
+" Arguments:\n"
+" +N\tRemoves the Nth entry counting from the left of the list\n"
+" \tshown by `dirs', starting with zero. For example: `popd +0'\n"
+" \tremoves the first directory, `popd +1' the second.\n"
+" \n"
+" -N\tRemoves the Nth entry counting from the right of the list\n"
+" \tshown by `dirs', starting with zero. For example: `popd -0'\n"
+" \tremoves the last directory, `popd -1' the next to last.\n"
+" \n"
+" The `dirs' builtin displays the directory stack."
+msgstr ""
+
+#: builtins/read.def:275
+#, c-format
+msgid "%s: invalid timeout specification"
+msgstr ""
+
+#: builtins/read.def:666
+#, c-format
+msgid "read error: %d: %s"
+msgstr "σφάλμα ανάγνωσης: %d: %s"
+
+#: builtins/return.def:75
+msgid "can only `return' from a function or sourced script"
+msgstr ""
+
+#: builtins/set.def:782
+msgid "cannot simultaneously unset a function and a variable"
+msgstr "«unset» δεν μπορεί να εφαρμοστεί συγχρόνως σε συνάρτηση και μεταβλητή"
+
+#: builtins/set.def:826
+#, c-format
+msgid "%s: cannot unset"
+msgstr "%s: αδυναμία «unset»"
+
+#: builtins/set.def:843
+#, c-format
+msgid "%s: cannot unset: readonly %s"
+msgstr "%s: αδυναμία unset: %s μόνο για ανάγνωση"
+
+#: builtins/set.def:854
+#, c-format
+msgid "%s: not an array variable"
+msgstr "%s: δεν είναι μεταβλητή πίνακα"
+
+#: builtins/setattr.def:187
+#, c-format
+msgid "%s: not a function"
+msgstr "%s: δεν είναι συνάρτηση"
+
+#: builtins/shift.def:71 builtins/shift.def:77
+msgid "shift count"
+msgstr ""
+
+#: builtins/shopt.def:279
+msgid "cannot set and unset shell options simultaneously"
+msgstr "οι επιλογές κελύφους δεν είναι δυνατόν συγχρόνως να ενεργοποιηθούν και απενεργοποιηθούν"
+
+#: builtins/shopt.def:346
+#, c-format
+msgid "%s: invalid shell option name"
+msgstr "%s: μη έγκυρο όνομα επιλογής"
+
+#: builtins/source.def:130
+msgid "filename argument required"
+msgstr "απαιτείται όνομα αρχείου για όρισμα"
+
+#: builtins/source.def:155
+#, c-format
+msgid "%s: file not found"
+msgstr "%s: αρχείο δεν βρέθηκε"
+
+#: builtins/suspend.def:101
+msgid "cannot suspend"
+msgstr ""
+
+#: builtins/suspend.def:111
+msgid "cannot suspend a login shell"
+msgstr ""
+
+#: builtins/type.def:234
+#, c-format
+msgid "%s is aliased to `%s'\n"
+msgstr "%s είναι ψευδώνημο του «%s»\n"
+
+#: builtins/type.def:255
+#, c-format
+msgid "%s is a shell keyword\n"
+msgstr "%s αποτελεί δεσμευμένη λέξη του κελύφους\n"
+
+#: builtins/type.def:274
+#, c-format
+msgid "%s is a function\n"
+msgstr "%s είναι συνάρτηση\n"
+
+#: builtins/type.def:296
+#, c-format
+msgid "%s is a shell builtin\n"
+msgstr ""
+
+#: builtins/type.def:317 builtins/type.def:393
+#, c-format
+msgid "%s is %s\n"
+msgstr "%s είναι %s\n"
+
+#: builtins/type.def:337
+#, c-format
+msgid "%s is hashed (%s)\n"
+msgstr ""
+
+#: builtins/ulimit.def:379
+#, c-format
+msgid "%s: invalid limit argument"
+msgstr "%s: μη έγκυρο όρισμα ορίου"
+
+#: builtins/ulimit.def:405
+#, c-format
+msgid "`%c': bad command"
+msgstr "«%c»: λάθος διαταγή"
+
+#: builtins/ulimit.def:434
+#, c-format
+msgid "%s: cannot get limit: %s"
+msgstr ""
+
+#: builtins/ulimit.def:460
+msgid "limit"
+msgstr "όριο"
+
+#: builtins/ulimit.def:472 builtins/ulimit.def:772
+#, c-format
+msgid "%s: cannot modify limit: %s"
+msgstr "%s: αδυναμία μεταβολής ορίου: %s"
+
+#: builtins/umask.def:118
+msgid "octal number"
+msgstr "οκταδικός αριθμός"
+
+#: builtins/umask.def:231
+#, c-format
+msgid "`%c': invalid symbolic mode operator"
+msgstr ""
+
+#: builtins/umask.def:286
+#, c-format
+msgid "`%c': invalid symbolic mode character"
+msgstr ""
+
+#: error.c:90 error.c:325 error.c:327 error.c:329
+msgid " line "
+msgstr " γραμμή "
+
+#: error.c:165
+#, c-format
+msgid "last command: %s\n"
+msgstr "τελευταία εντολή: %s\n"
+
+#: error.c:173
+#, c-format
+msgid "Aborting..."
+msgstr ""
+
+#: error.c:410
+msgid "unknown command error"
+msgstr "άγνωστο σφάλμα εντολής"
+
+#: error.c:411
+msgid "bad command type"
+msgstr ""
+
+#: error.c:412
+msgid "bad connector"
+msgstr ""
+
+#: error.c:413
+msgid "bad jump"
+msgstr ""
+
+#: error.c:451
+#, c-format
+msgid "%s: unbound variable"
+msgstr ""
+
+#: eval.c:189
+#, c-format
+msgid "\atimed out waiting for input: auto-logout\n"
+msgstr "\aη αναμονή για δεδομένα έληξε: αυτόματη αποσύνδεση\n"
+
+#: execute_cmd.c:512
+#, c-format
+msgid "cannot redirect standard input from /dev/null: %s"
+msgstr "αδυναμία ανακατεύθυνσης τυπικής εισόδου από /dev/null: %s"
+
+#: execute_cmd.c:1228
+#, c-format
+msgid "TIMEFORMAT: `%c': invalid format character"
+msgstr "TIMEFORMAT: «%c»: μη έγκυρος χαρακτήρας μορφοποίησης"
+
+#: execute_cmd.c:2282
+msgid "pipe error"
+msgstr "pipe error"
+
+#: execute_cmd.c:4347
+#, c-format
+msgid "%s: maximum function nesting level exceeded (%d)"
+msgstr ""
+
+#: execute_cmd.c:4840
+#, c-format
+msgid "%s: restricted: cannot specify `/' in command names"
+msgstr "%s: περιορισμός: δεν μπορεί να περιέχεται «/» σε όνομα εντολής"
+
+#: execute_cmd.c:4929
+#, c-format
+msgid "%s: command not found"
+msgstr "%s: εντολή δεν βρέθηκε"
+
+#: execute_cmd.c:5160
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: execute_cmd.c:5197
+#, c-format
+msgid "%s: %s: bad interpreter"
+msgstr ""
+
+#: execute_cmd.c:5234
+#, c-format
+msgid "%s: cannot execute binary file: %s"
+msgstr "%s: αδυναμία εκτέλεσης δυαδικού αρχείου: %s"
+
+#: execute_cmd.c:5306
+#, c-format
+msgid "`%s': is a special builtin"
+msgstr "«%s»: είναι ειδικό builtin"
+
+#: execute_cmd.c:5358
+#, c-format
+msgid "cannot duplicate fd %d to fd %d"
+msgstr "αδυναμία αντιγραφής του fd %d στον fd %d"
+
+#: expr.c:262
+msgid "expression recursion level exceeded"
+msgstr ""
+
+#: expr.c:286
+msgid "recursion stack underflow"
+msgstr ""
+
+#: expr.c:434
+msgid "syntax error in expression"
+msgstr "συντακτικό σφάλμα στην έκφραση"
+
+#: expr.c:478
+msgid "attempted assignment to non-variable"
+msgstr "απόπειρα ανάθεσης σε μη-μεταβλητή"
+
+#: expr.c:498 expr.c:847
+msgid "division by 0"
+msgstr "διαίρεση διά 0"
+
+#: expr.c:545
+msgid "bug: bad expassign token"
+msgstr ""
+
+#: expr.c:598
+msgid "`:' expected for conditional expression"
+msgstr ""
+
+#: expr.c:904
+msgid "exponent less than 0"
+msgstr "εκθέτης μικρότερος του 0"
+
+#: expr.c:957
+msgid "identifier expected after pre-increment or pre-decrement"
+msgstr ""
+
+#: expr.c:983
+msgid "missing `)'"
+msgstr "λείπει «)»"
+
+#: expr.c:1034 expr.c:1371
+msgid "syntax error: operand expected"
+msgstr "syntax error: αναμενόταν τελεστέος"
+
+#: expr.c:1373
+msgid "syntax error: invalid arithmetic operator"
+msgstr "syntax error: μη έγκυρος αριθμητικός τελεστής"
+
+#: expr.c:1397
+#, c-format
+msgid "%s%s%s: %s (error token is \"%s\")"
+msgstr "%s%s%s: %s (το λανθασμένο σύμβολο είναι \"%s\")"
+
+#: expr.c:1455
+msgid "invalid arithmetic base"
+msgstr "μη έγκυρη αριθμητική βάση"
+
+#: expr.c:1475
+msgid "value too great for base"
+msgstr "τιμή πολύ μεγάλη για βάση"
+
+#: expr.c:1524
+#, c-format
+msgid "%s: expression error\n"
+msgstr "%s: σφάλμα έκφρασης\n"
+
+#: general.c:61
+msgid "getcwd: cannot access parent directories"
+msgstr "getcwd: αδυναμία πρόσβασης στο γονικό κατάλογο"
+
+#: input.c:101 subst.c:5067
+#, c-format
+msgid "cannot reset nodelay mode for fd %d"
+msgstr "αδυναμία επανάταξης nodelay mode για fd %d"
+
+#: input.c:267
+#, c-format
+msgid "cannot allocate new file descriptor for bash input from fd %d"
+msgstr "αδυναμία εκχώρησης νέου περιγραφέα αρχείου για είσοδο του bash από fd %d"
+
+#: input.c:275
+#, c-format
+msgid "save_bash_input: buffer already exists for new fd %d"
+msgstr ""
+
+#: jobs.c:471
+msgid "start_pipeline: pgrp pipe"
+msgstr "start_pipeline: pgrp pipe"
+
+#: jobs.c:892
+#, c-format
+msgid "forked pid %d appears in running job %d"
+msgstr ""
+
+#: jobs.c:1010
+#, c-format
+msgid "deleting stopped job %d with process group %ld"
+msgstr ""
+
+#: jobs.c:1115
+#, c-format
+msgid "add_process: process %5ld (%s) in the_pipeline"
+msgstr ""
+
+#: jobs.c:1118
+#, c-format
+msgid "add_process: pid %5ld (%s) marked as still alive"
+msgstr ""
+
+#: jobs.c:1433
+#, c-format
+msgid "describe_pid: %ld: no such pid"
+msgstr "describe_pid: %ld: δεν υπάρχει τέτοιο pid"
+
+#: jobs.c:1448
+#, c-format
+msgid "Signal %d"
+msgstr "Σήμα %d"
+
+#: jobs.c:1462 jobs.c:1487
+msgid "Done"
+msgstr "Done"
+
+#: jobs.c:1467 siglist.c:123
+msgid "Stopped"
+msgstr "σταματημένο"
+
+#: jobs.c:1471
+#, c-format
+msgid "Stopped(%s)"
+msgstr "σταματημένο(%s)"
+
+#: jobs.c:1475
+msgid "Running"
+msgstr ""
+
+#: jobs.c:1489
+#, c-format
+msgid "Done(%d)"
+msgstr "Done(%d)"
+
+#: jobs.c:1491
+#, c-format
+msgid "Exit %d"
+msgstr "Έξοδος %d"
+
+#: jobs.c:1494
+msgid "Unknown status"
+msgstr "Άγνωστη κατάσταση"
+
+#: jobs.c:1581
+#, c-format
+msgid "(core dumped) "
+msgstr "(core dumped) "
+
+#: jobs.c:1600
+#, c-format
+msgid " (wd: %s)"
+msgstr " (wd: %s)"
+
+#: jobs.c:1817
+#, c-format
+msgid "child setpgid (%ld to %ld)"
+msgstr "child setpgid (%ld to %ld)"
+
+#: jobs.c:2136 nojobs.c:605
+#, c-format
+msgid "wait: pid %ld is not a child of this shell"
+msgstr "wait: διεργασία %ld δεν αποτελεί θυγατρική αυτού του κελύφους"
+
+#: jobs.c:2383
+#, c-format
+msgid "wait_for: No record of process %ld"
+msgstr "wait_for: Δεν υπάρχουν στοιχεία για διεργασία %ld"
+
+#: jobs.c:2689
+#, c-format
+msgid "wait_for_job: job %d is stopped"
+msgstr "wait_for_job: η εργασία %d είναι σταματημένη"
+
+#: jobs.c:2981
+#, c-format
+msgid "%s: job has terminated"
+msgstr "%s: η εργασία τερματίστηκε"
+
+#: jobs.c:2990
+#, c-format
+msgid "%s: job %d already in background"
+msgstr "%s: εργασία %d ήδη στο παρασκήνιο"
+
+#: jobs.c:3215
+msgid "waitchld: turning on WNOHANG to avoid indefinite block"
+msgstr ""
+
+#: jobs.c:3699
+#, c-format
+msgid "%s: line %d: "
+msgstr "%s: γραμμή %d: "
+
+#: jobs.c:3713 nojobs.c:843
+#, c-format
+msgid " (core dumped)"
+msgstr " (core dumped)"
+
+#: jobs.c:3725 jobs.c:3738
+#, c-format
+msgid "(wd now: %s)\n"
+msgstr "(τώρα wd: %s)\n"
+
+#: jobs.c:3770
+msgid "initialize_job_control: getpgrp failed"
+msgstr "initialize_job_control: αποτυχία getpgrp"
+
+#: jobs.c:3831
+msgid "initialize_job_control: line discipline"
+msgstr ""
+
+#: jobs.c:3841
+msgid "initialize_job_control: setpgid"
+msgstr "initialize_job_control: setpgid"
+
+#: jobs.c:3862 jobs.c:3871
+#, c-format
+msgid "cannot set terminal process group (%d)"
+msgstr ""
+
+#: jobs.c:3876
+msgid "no job control in this shell"
+msgstr "δεν υπάρχει job control σ'αυτό το κέλυφος"
+
+#: lib/malloc/malloc.c:296
+#, c-format
+msgid "malloc: failed assertion: %s\n"
+msgstr ""
+
+#: lib/malloc/malloc.c:312
+#, c-format
+msgid ""
+"\r\n"
+"malloc: %s:%d: assertion botched\r\n"
+msgstr ""
+
+#: lib/malloc/malloc.c:313
+msgid "unknown"
+msgstr "άγνωστο"
+
+#: lib/malloc/malloc.c:801
+msgid "malloc: block on free list clobbered"
+msgstr ""
+
+#: lib/malloc/malloc.c:878
+msgid "free: called with already freed block argument"
+msgstr ""
+
+#: lib/malloc/malloc.c:881
+msgid "free: called with unallocated block argument"
+msgstr ""
+
+#: lib/malloc/malloc.c:900
+msgid "free: underflow detected; mh_nbytes out of range"
+msgstr ""
+
+#: lib/malloc/malloc.c:906
+msgid "free: start and end chunk sizes differ"
+msgstr ""
+
+#: lib/malloc/malloc.c:1005
+msgid "realloc: called with unallocated block argument"
+msgstr ""
+
+#: lib/malloc/malloc.c:1020
+msgid "realloc: underflow detected; mh_nbytes out of range"
+msgstr ""
+
+#: lib/malloc/malloc.c:1026
+msgid "realloc: start and end chunk sizes differ"
+msgstr ""
+
+#: lib/malloc/table.c:194
+#, c-format
+msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
+msgstr ""
+
+#: lib/malloc/table.c:203
+#, c-format
+msgid "register_alloc: %p already in table as allocated?\n"
+msgstr ""
+
+#: lib/malloc/table.c:256
+#, c-format
+msgid "register_free: %p already in table as free?\n"
+msgstr "register_free: %p ήδη στον πίνακα ως ελεύθερος;\n"
+
+#: lib/sh/fmtulong.c:102
+msgid "invalid base"
+msgstr "μη έγκυρη βάση"
+
+#: lib/sh/netopen.c:168
+#, c-format
+msgid "%s: host unknown"
+msgstr "%s: άγνωστος host"
+
+#: lib/sh/netopen.c:175
+#, c-format
+msgid "%s: invalid service"
+msgstr "%s: μη έγκυρη υπηρεσία"
+
+#: lib/sh/netopen.c:306
+#, c-format
+msgid "%s: bad network path specification"
+msgstr ""
+
+#: lib/sh/netopen.c:346
+msgid "network operations not supported"
+msgstr "μη υποστηριζόμενες δικτιακές υπηρεσίες"
+
+#: locale.c:204
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s)"
+msgstr "setlocale: LC_ALL: αδυναμία μεταβολής locale (%s)"
+
+#: locale.c:206
+#, c-format
+msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
+msgstr "setlocale: LC_ALL: αδυναμία μεταβολής locale (%s): %s"
+
+#: locale.c:263
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s)"
+msgstr "setlocale: %s: αδυναμία μεταβολής locale (%s)"
+
+#: locale.c:265
+#, c-format
+msgid "setlocale: %s: cannot change locale (%s): %s"
+msgstr "setlocale: %s: αδυναμία μεταβολής locale (%s): %s"
+
+#: mailcheck.c:439
+msgid "You have mail in $_"
+msgstr "Έχεις μήνυμα στο $_"
+
+#: mailcheck.c:464
+msgid "You have new mail in $_"
+msgstr "Έχεις νέο μήνυμα στο $_"
+
+#: mailcheck.c:480
+#, c-format
+msgid "The mail in %s has been read\n"
+msgstr "Το μήνυμα στο %s διαβάστηκε\n"
+
+#: make_cmd.c:323
+msgid "syntax error: arithmetic expression required"
+msgstr "syntax error: απαιτείται αριθμητική έκφραση"
+
+#: make_cmd.c:325
+msgid "syntax error: `;' unexpected"
+msgstr "συντακτικό σφάλμα: δεν αναμενόταν «;»"
+
+#: make_cmd.c:326
+#, c-format
+msgid "syntax error: `((%s))'"
+msgstr "συντακτικό σφάλμα: «((%s))»"
+
+#: make_cmd.c:578
+#, c-format
+msgid "make_here_document: bad instruction type %d"
+msgstr ""
+
+#: make_cmd.c:662
+#, c-format
+msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
+msgstr ""
+
+#: make_cmd.c:759
+#, c-format
+msgid "make_redirection: redirection instruction `%d' out of range"
+msgstr "make_redirection: η οδηγία της ανακατεύθυνσης «%d» εκτός ορίων"
+
+#: parse.y:3209 parse.y:3480
+#, c-format
+msgid "unexpected EOF while looking for matching `%c'"
+msgstr "μη αναμενόμενο EOF κατά την αναζήτηση «%c»"
+
+#: parse.y:4086
+msgid "unexpected EOF while looking for `]]'"
+msgstr "μη αναμενόμενο EOF ενώ έψαχνα για «]]»"
+
+#: parse.y:4091
+#, fuzzy, c-format
+msgid "syntax error in conditional expression: unexpected token `%s'"
+msgstr "syntax error in conditional expression: μη αναμενόμενο σύμβολο «%s»"
+
+#: parse.y:4095
+msgid "syntax error in conditional expression"
+msgstr ""
+
+#: parse.y:4173
+#, c-format
+msgid "unexpected token `%s', expected `)'"
+msgstr "μη αναμενόμενο σύμβολο «%s», αναμενόταν «)»"
+
+#: parse.y:4177
+msgid "expected `)'"
+msgstr "αναμενόταν «)»"
+
+#: parse.y:4205
+#, c-format
+msgid "unexpected argument `%s' to conditional unary operator"
+msgstr ""
+
+#: parse.y:4209
+msgid "unexpected argument to conditional unary operator"
+msgstr ""
+
+#: parse.y:4255
+#, c-format
+msgid "unexpected token `%s', conditional binary operator expected"
+msgstr ""
+
+#: parse.y:4259
+msgid "conditional binary operator expected"
+msgstr ""
+
+#: parse.y:4281
+#, c-format
+msgid "unexpected argument `%s' to conditional binary operator"
+msgstr ""
+
+#: parse.y:4285
+msgid "unexpected argument to conditional binary operator"
+msgstr ""
+
+#: parse.y:4296
+#, c-format
+msgid "unexpected token `%c' in conditional command"
+msgstr ""
+
+#: parse.y:4299
+#, c-format
+msgid "unexpected token `%s' in conditional command"
+msgstr ""
+
+#: parse.y:4303
+#, c-format
+msgid "unexpected token %d in conditional command"
+msgstr ""
+
+#: parse.y:5649
+#, c-format
+msgid "syntax error near unexpected token `%s'"
+msgstr "συντακτικό σφάλμα κοντά στο μη αναμενόμενο σύμβολο «%s»"
+
+#: parse.y:5667
+#, c-format
+msgid "syntax error near `%s'"
+msgstr "συντακτικό σφάλμα κοντά σε «%s»"
+
+#: parse.y:5677
+msgid "syntax error: unexpected end of file"
+msgstr "syntax error: μη αναμενόμενο τέλος αρχείου"
+
+#: parse.y:5677
+msgid "syntax error"
+msgstr "συντακτικό σφάλμα"
+
+#: parse.y:5739
+#, c-format
+msgid "Use \"%s\" to leave the shell.\n"
+msgstr "Χρήση «%s» για έξοδο από το κέλυφος.\n"
+
+#: parse.y:5901
+msgid "unexpected EOF while looking for matching `)'"
+msgstr "μη αναμενόμενο EOF ενώ έψαχνα «)»"
+
+#: pcomplete.c:1093
+#, c-format
+msgid "completion: function `%s' not found"
+msgstr "completion: η συνάρτηση «%s» δεν βρέθηκε"
+
+#: pcomplib.c:182
+#, c-format
+msgid "progcomp_insert: %s: NULL COMPSPEC"
+msgstr "progcomp_insert: %s: NULL COMPSPEC"
+
+#: print_cmd.c:300
+#, c-format
+msgid "print_command: bad connector `%d'"
+msgstr ""
+
+#: print_cmd.c:373
+#, c-format
+msgid "xtrace_set: %d: invalid file descriptor"
+msgstr "xtrace_set: %d: μη έγκυρος περιγραφέας αρχείου"
+
+#: print_cmd.c:378
+msgid "xtrace_set: NULL file pointer"
+msgstr "xtrace_set: NULL file pointer"
+
+#: print_cmd.c:382
+#, c-format
+msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
+msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"
+
+#: print_cmd.c:1518
+#, c-format
+msgid "cprintf: `%c': invalid format character"
+msgstr "cprintf: «%c»: μη έγκυρη μορφή χαρακτήρα"
+
+#: redir.c:123 redir.c:170
+msgid "file descriptor out of range"
+msgstr "περιγραφέας αρχείου εκτός ορίων"
+
+#: redir.c:177
+#, c-format
+msgid "%s: ambiguous redirect"
+msgstr "%s: ασαφής ανακατεύθυνση"
+
+#: redir.c:181
+#, c-format
+msgid "%s: cannot overwrite existing file"
+msgstr "%s: αδυναμία εγγραφής πάνω σε υπάρχον αρχείο"
+
+#: redir.c:186
+#, c-format
+msgid "%s: restricted: cannot redirect output"
+msgstr "%s: restricted: αδυναμία ανακατεύθυνσης εξόδου"
+
+#: redir.c:191
+#, c-format
+msgid "cannot create temp file for here-document: %s"
+msgstr "αδυναμία δημιουργίας προσωρινού αρχείου για here-document: %s"
+
+#: redir.c:195
+#, c-format
+msgid "%s: cannot assign fd to variable"
+msgstr "%s: αδυναμία ανάθεσης fd σε μεταβλητή"
+
+#: redir.c:582
+msgid "/dev/(tcp|udp)/host/port not supported without networking"
+msgstr "/dev/(tcp|udp)/host/port δεν υποστηρίζεται χωρίς δικτύωση"
+
+#: redir.c:861 redir.c:971 redir.c:1032 redir.c:1194
+msgid "redirection error: cannot duplicate fd"
+msgstr ""
+
+#: shell.c:339
+msgid "could not find /tmp, please create!"
+msgstr "δεν μπόρεσα να βρω /tmp, παρακαλώ να τον δημιουργήσετε!"
+
+#: shell.c:343
+msgid "/tmp must be a valid directory name"
+msgstr "/tmp πρέπει να είναι ένα έγκυρο όνομα αρχείου"
+
+#: shell.c:890
+#, c-format
+msgid "%c%c: invalid option"
+msgstr "%c%c: μη έγκυρη επιλογή"
+
+#: shell.c:1682
+msgid "I have no name!"
+msgstr "Δεν έχω όνομα!"
+
+#: shell.c:1827
+#, c-format
+msgid "GNU bash, version %s-(%s)\n"
+msgstr "GNU bash, έκδοση %s-(%s)\n"
+
+#: shell.c:1828
+#, c-format
+msgid ""
+"Usage:\t%s [GNU long option] [option] ...\n"
+"\t%s [GNU long option] [option] script-file ...\n"
+msgstr ""
+"Χρήση:\t%s [μακρά επιλογή GNU] [επιλογή] ...\n"
+"\t%s [μακρά επιλογή GNU] [επιλοη] script-file ...\n"
+
+#: shell.c:1830
+msgid "GNU long options:\n"
+msgstr "Μακρές επιλογές GNU:\n"
+
+#: shell.c:1834
+msgid "Shell options:\n"
+msgstr "Επιλογές κελύφους:\n"
+
+#: shell.c:1835
+msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n"
+msgstr ""
+
+#: shell.c:1850
+#, c-format
+msgid "\t-%s or -o option\n"
+msgstr "\t-%s ή επιλογή -o\n"
+
+#: shell.c:1856
+#, c-format
+msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
+msgstr "Πληκτρολόγησε «%s -c \"help set\"» για πληροφορίες επί των επιλογών κελύφους.\n"
+
+#: shell.c:1857
+#, c-format
+msgid "Type `%s -c help' for more information about shell builtin commands.\n"
+msgstr "Πληκτρολόγησε «%s -c help» για περισσότερες πληροφορίες σχετικά με τις ενσωματομένες στο κέλυφος εντολές.\n"
+
+#: shell.c:1858
+#, c-format
+msgid "Use the `bashbug' command to report bugs.\n"
+msgstr "Χρησιμοποίησε την εντολή «bashbug» για αναφορά σφαλμάτων.\n"
+
+#: sig.c:679
+#, c-format
+msgid "sigprocmask: %d: invalid operation"
+msgstr "sigprocmask: %d: μη έγκυρη λειτουργία"
+
+#: siglist.c:48
+msgid "Bogus signal"
+msgstr ""
+
+#: siglist.c:51
+msgid "Hangup"
+msgstr "Hangup"
+
+#: siglist.c:55
+msgid "Interrupt"
+msgstr "Διακοπή"
+
+#: siglist.c:59
+msgid "Quit"
+msgstr "Quit"
+
+#: siglist.c:63
+msgid "Illegal instruction"
+msgstr "Μη έγκυρη οδηγία"
+
+#: siglist.c:67
+msgid "BPT trace/trap"
+msgstr "BPT trace/trap"
+
+#: siglist.c:75
+msgid "ABORT instruction"
+msgstr "οδηγία ABORT"
+
+#: siglist.c:79
+msgid "EMT instruction"
+msgstr "οδηγία EMT"
+
+#: siglist.c:83
+msgid "Floating point exception"
+msgstr "Εξαίρεση κινητής υποδιαστολής"
+
+#: siglist.c:87
+msgid "Killed"
+msgstr ""
+
+#: siglist.c:91
+msgid "Bus error"
+msgstr ""
+
+#: siglist.c:95
+msgid "Segmentation fault"
+msgstr ""
+
+#: siglist.c:99
+msgid "Bad system call"
+msgstr ""
+
+#: siglist.c:103
+msgid "Broken pipe"
+msgstr ""
+
+#: siglist.c:107
+msgid "Alarm clock"
+msgstr "Ρολόι συναγερμού"
+
+#: siglist.c:111
+msgid "Terminated"
+msgstr ""
+
+#: siglist.c:115
+msgid "Urgent IO condition"
+msgstr "Επείγουσα κατάσταση IO"
+
+#: siglist.c:119
+msgid "Stopped (signal)"
+msgstr ""
+
+#: siglist.c:127
+msgid "Continue"
+msgstr "Συνέχεια"
+
+#: siglist.c:135
+msgid "Child death or stop"
+msgstr ""
+
+#: siglist.c:139
+msgid "Stopped (tty input)"
+msgstr ""
+
+#: siglist.c:143
+msgid "Stopped (tty output)"
+msgstr ""
+
+#: siglist.c:147
+msgid "I/O ready"
+msgstr "I/O ready"
+
+#: siglist.c:151
+msgid "CPU limit"
+msgstr "όριο CPU"
+
+#: siglist.c:155
+msgid "File limit"
+msgstr "Όριο αρχείου"
+
+#: siglist.c:159
+msgid "Alarm (virtual)"
+msgstr "Alarm (virtual)"
+
+#: siglist.c:163
+msgid "Alarm (profile)"
+msgstr "Alarm (profile)"
+
+#: siglist.c:167
+msgid "Window changed"
+msgstr "Παράθυρο άλλαξε"
+
+#: siglist.c:171
+msgid "Record lock"
+msgstr ""
+
+#: siglist.c:175
+msgid "User signal 1"
+msgstr ""
+
+#: siglist.c:179
+msgid "User signal 2"
+msgstr ""
+
+#: siglist.c:183
+msgid "HFT input data pending"
+msgstr "Δεδομένα εισόδου HFT στην αναμονή"
+
+#: siglist.c:187
+msgid "power failure imminent"
+msgstr "επικείμενη έλλειψη ρεύματος"
+
+#: siglist.c:191
+msgid "system crash imminent"
+msgstr "επικείμενη πτώση συστήματος"
+
+#: siglist.c:195
+msgid "migrate process to another CPU"
+msgstr "μετανάστευση διεργασίας σε άλλη CPU"
+
+#: siglist.c:199
+msgid "programming error"
+msgstr "προγραμματιστικό σφάλμα"
+
+#: siglist.c:203
+msgid "HFT monitor mode granted"
+msgstr ""
+
+#: siglist.c:207
+msgid "HFT monitor mode retracted"
+msgstr ""
+
+#: siglist.c:211
+msgid "HFT sound sequence has completed"
+msgstr ""
+
+#: siglist.c:215
+msgid "Information request"
+msgstr "Αίτηση για πληροφορίες"
+
+#: siglist.c:223
+msgid "Unknown Signal #"
+msgstr "Άγνωστο σήμα #"
+
+#: siglist.c:225
+#, c-format
+msgid "Unknown Signal #%d"
+msgstr "Άγνωστο σήμα #%d"
+
+#: subst.c:1352 subst.c:1510
+#, c-format
+msgid "bad substitution: no closing `%s' in %s"
+msgstr ""
+
+#: subst.c:2823
+#, c-format
+msgid "%s: cannot assign list to array member"
+msgstr ""
+
+#: subst.c:4964 subst.c:4980
+msgid "cannot make pipe for process substitution"
+msgstr ""
+
+#: subst.c:5012
+msgid "cannot make child for process substitution"
+msgstr ""
+
+#: subst.c:5057
+#, c-format
+msgid "cannot open named pipe %s for reading"
+msgstr "αδυναμία ανοίγματοε επώνυμης σωλήνας %s προς ανάγνωση"
+
+#: subst.c:5059
+#, c-format
+msgid "cannot open named pipe %s for writing"
+msgstr "αδυναμία ανοίγματος επώνυμης σωλήνας %s προς εγγραφή"
+
+#: subst.c:5077
+#, c-format
+msgid "cannot duplicate named pipe %s as fd %d"
+msgstr ""
+
+#: subst.c:5273
+msgid "cannot make pipe for command substitution"
+msgstr ""
+
+#: subst.c:5311
+msgid "cannot make child for command substitution"
+msgstr ""
+
+#: subst.c:5330
+msgid "command_substitute: cannot duplicate pipe as fd 1"
+msgstr ""
+
+#: subst.c:5733 subst.c:7900
+#, c-format
+msgid "%s: invalid variable name for name reference"
+msgstr ""
+
+#: subst.c:5926
+#, c-format
+msgid "%s: parameter null or not set"
+msgstr "%s: παράμετρος κενή ή δεν έχει οριστεί"
+
+#: subst.c:6198 subst.c:6213
+#, c-format
+msgid "%s: substring expression < 0"
+msgstr "%s: έκφραση αρνητική < 0"
+
+#: subst.c:7356
+#, c-format
+msgid "%s: bad substitution"
+msgstr "%s: κακή αντικατάσταση"
+
+#: subst.c:7433
+#, c-format
+msgid "$%s: cannot assign in this way"
+msgstr "$%s: αδύνατη ανάθεση κατ' αυτόν τον τρόπο"
+
+#: subst.c:7767
+msgid "future versions of the shell will force evaluation as an arithmetic substitution"
+msgstr ""
+
+#: subst.c:8271
+#, c-format
+msgid "bad substitution: no closing \"`\" in %s"
+msgstr "κακή αντικατάσταση: δεν υπάρχει «`» που κλείνει στο %s"
+
+#: subst.c:9172
+#, c-format
+msgid "no match: %s"
+msgstr ""
+
+#: test.c:147
+msgid "argument expected"
+msgstr "αναμενόταν όρισμα"
+
+#: test.c:156
+#, c-format
+msgid "%s: integer expression expected"
+msgstr "%s: αναμενόταν ως έκφραση ακέραιος αριθμός"
+
+#: test.c:264
+msgid "`)' expected"
+msgstr "αναμενόταν «)»"
+
+#: test.c:266
+#, c-format
+msgid "`)' expected, found %s"
+msgstr "σναμενόταν «)», βρέθηκε %s"
+
+#: test.c:281 test.c:721 test.c:724
+#, c-format
+msgid "%s: unary operator expected"
+msgstr ""
+
+#: test.c:468 test.c:764
+#, c-format
+msgid "%s: binary operator expected"
+msgstr "%s: αναμενόταν δυαδικός τελεστής"
+
+#: test.c:839
+msgid "missing `]'"
+msgstr "απούσα «]»"
+
+#: trap.c:217
+msgid "invalid signal number"
+msgstr "μη έγκυρος αριθμός σήματος"
+
+#: trap.c:348
+#, c-format
+msgid "run_pending_traps: bad value in trap_list[%d]: %p"
+msgstr ""
+
+#: trap.c:352
+#, c-format
+msgid "run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
+msgstr ""
+
+#: trap.c:398
+#, c-format
+msgid "trap_handler: bad signal %d"
+msgstr "trap_handler: κακό σήμα %d"
+
+#: variables.c:380
+#, c-format
+msgid "error importing function definition for `%s'"
+msgstr ""
+
+#: variables.c:778
+#, c-format
+msgid "shell level (%d) too high, resetting to 1"
+msgstr "επίπεδο κελύφους (%d) πολύ υψηλό, επαναφορά στο 1"
+
+#: variables.c:2198
+msgid "make_local_variable: no function context at current scope"
+msgstr "make_local_variable: no function context at current scope"
+
+#: variables.c:2217
+#, c-format
+msgid "%s: variable may not be assigned value"
+msgstr ""
+
+#: variables.c:3554
+msgid "all_local_variables: no function context at current scope"
+msgstr "all_local_variables: no function context at current scope"
+
+#: variables.c:3799
+#, c-format
+msgid "%s has null exportstr"
+msgstr "%s έχει κενό exportstr"
+
+#: variables.c:3804 variables.c:3813
+#, c-format
+msgid "invalid character %d in exportstr for %s"
+msgstr "ο χαρακτήρας %d δεν έίναι έγκυρος στην exportstr για %s"
+
+#: variables.c:3819
+#, c-format
+msgid "no `=' in exportstr for %s"
+msgstr "απουσία «=» στην exportstr για %s"
+
+#: variables.c:4252
+msgid "pop_var_context: head of shell_variables not a function context"
+msgstr "pop_var_context: head of shell_variables not a function context"
+
+#: variables.c:4265
+msgid "pop_var_context: no global_variables context"
+msgstr "pop_var_context: no global_variables context"
+
+#: variables.c:4339
+msgid "pop_scope: head of shell_variables not a temporary environment scope"
+msgstr "pop_scope: head of shell_variables not a temporary environment scope"
+
+#: variables.c:5165
+#, c-format
+msgid "%s: %s: cannot open as FILE"
+msgstr "%s: %s: αδυναμία ανοίγματος ως ΑΡΧΕΙΟ"
+
+#: variables.c:5170
+#, c-format
+msgid "%s: %s: invalid value for trace file descriptor"
+msgstr ""
+
+#: variables.c:5215
+#, c-format
+msgid "%s: %s: compatibility value out of range"
+msgstr ""
+
+#: version.c:46 version2.c:46
+msgid "Copyright (C) 2012 Free Software Foundation, Inc."
+msgstr "Copyright (C) 2012 Free Software Foundation, Inc."
+
+#: version.c:47 version2.c:47
+msgid "License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\n"
+msgstr "License GPLv3+: GNU GPL έκδοση 3 ή νεώτερη <http://gnu.org/licenses/gpl.html>\n"
+
+#: version.c:86 version2.c:86
+#, c-format
+msgid "GNU bash, version %s (%s)\n"
+msgstr "GNU bash, έκδοση %s (%s)\n"
+
+#: version.c:91 version2.c:91
+msgid "This is free software; you are free to change and redistribute it."
+msgstr "This is free software; you are free to change and redistribute it."
+
+#: version.c:92 version2.c:92
+msgid "There is NO WARRANTY, to the extent permitted by law."
+msgstr "There is NO WARRANTY, to the extent permitted by law."
+
+#: xmalloc.c:91
+#, c-format
+msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: αδυναμία εκχώρησης %lu bytes (%lu bytes εκχωρήθηκαν)"
+
+#: xmalloc.c:93
+#, c-format
+msgid "%s: cannot allocate %lu bytes"
+msgstr "%s: αδυναμία εκχώρησης %lu bytes"
+
+#: xmalloc.c:163
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
+msgstr "%s: %s:%d: αδυναμία εκχώρησης %lu bytes (%lu bytes εκχωρήθηκαν)"
+
+#: xmalloc.c:165
+#, c-format
+msgid "%s: %s:%d: cannot allocate %lu bytes"
+msgstr "%s: %s:%d: αδυναμία εκχώρησης %lu bytes"
+
+#: builtins.c:43
+msgid "alias [-p] [name[=value] ... ]"
+msgstr "alias [-p] [name[=value] ... ]"
+
+#: builtins.c:47
+msgid "unalias [-a] name [name ...]"
+msgstr "unalias [-a] name [name ...]"
+
+#: builtins.c:51
+msgid "bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-x keyseq:shell-command] [keyseq:readline-function or readline-command]"
+msgstr "bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-x keyseq:shell-command] [keyseq:readline-function ή readline-command]"
+
+#: builtins.c:54
+msgid "break [n]"
+msgstr "break [n]"
+
+#: builtins.c:56
+msgid "continue [n]"
+msgstr "continue [n]"
+
+#: builtins.c:58
+msgid "builtin [shell-builtin [arg ...]]"
+msgstr "builtin [shell-builtin [arg ...]]"
+
+#: builtins.c:61
+msgid "caller [expr]"
+msgstr "caller [expr]"
+
+#: builtins.c:64
+msgid "cd [-L|[-P [-e]]] [dir]"
+msgstr "cd [-L|[-P [-e]]] [dir]"
+
+#: builtins.c:66
+msgid "pwd [-LP]"
+msgstr "pwd [-LP]"
+
+#: builtins.c:68
+msgid ":"
+msgstr ":"
+
+#: builtins.c:70
+msgid "true"
+msgstr "αληθής"
+
+#: builtins.c:72
+msgid "false"
+msgstr "ψευδής"
+
+#: builtins.c:74
+msgid "command [-pVv] command [arg ...]"
+msgstr "command [-pVv] command [arg ...]"
+
+#: builtins.c:76
+msgid "declare [-aAfFgilnrtux] [-p] [name[=value] ...]"
+msgstr "declare [-aAfFgilnrtux] [-p] [name[=value] ...]"
+
+#: builtins.c:78
+msgid "typeset [-aAfFgilrtux] [-p] name[=value] ..."
+msgstr "typeset [-aAfFgilrtux] [-p] name[=value] ..."
+
+#: builtins.c:80
+msgid "local [option] name[=value] ..."
+msgstr "local [option] name[=value] ..."
+
+#: builtins.c:83
+msgid "echo [-neE] [arg ...]"
+msgstr "echo [-neE] [arg ...]"
+
+#: builtins.c:87
+msgid "echo [-n] [arg ...]"
+msgstr "echo [-n] [arg ...]"
+
+#: builtins.c:90
+msgid "enable [-a] [-dnps] [-f filename] [name ...]"
+msgstr "enable [-a] [-dnps] [-f filename] [name ...]"
+
+#: builtins.c:92
+msgid "eval [arg ...]"
+msgstr "eval [arg ...]"
+
+#: builtins.c:94
+msgid "getopts optstring name [arg]"
+msgstr "getopts optstring name [arg]"
+
+#: builtins.c:96
+msgid "exec [-cl] [-a name] [command [arguments ...]] [redirection ...]"
+msgstr "exec [-cl] [-a name] [command [arguments ...]] [redirection ...]"
+
+#: builtins.c:98
+msgid "exit [n]"
+msgstr "exit [n]"
+
+#: builtins.c:100
+msgid "logout [n]"
+msgstr "logout [n]"
+
+#: builtins.c:103
+msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+msgstr "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
+
+#: builtins.c:107
+msgid "fg [job_spec]"
+msgstr "fg [job_spec]"
+
+#: builtins.c:111
+msgid "bg [job_spec ...]"
+msgstr "bg [job_spec ...]"
+
+#: builtins.c:114
+msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
+msgstr "hash [-lr] [-p pathname] [-dt] [name ...]"
+
+#: builtins.c:117
+msgid "help [-dms] [pattern ...]"
+msgstr "help [-dms] [pattern ...]"
+
+#: builtins.c:121
+msgid "history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg [arg...]"
+msgstr "history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg [arg...]"
+
+#: builtins.c:125
+msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+msgstr "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
+
+#: builtins.c:129
+msgid "disown [-h] [-ar] [jobspec ...]"
+msgstr "disown [-h] [-ar] [jobspec ...]"
+
+#: builtins.c:132
+msgid "kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]"
+msgstr "kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]"
+
+#: builtins.c:134
+msgid "let arg [arg ...]"
+msgstr "let arg [arg ...]"
+
+#: builtins.c:136
+msgid "read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p prompt] [-t timeout] [-u fd] [name ...]"
+msgstr "read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p prompt] [-t timeout] [-u fd] [name ...]"
+
+#: builtins.c:138
+msgid "return [n]"
+msgstr "return [n]"
+
+#: builtins.c:140
+msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+msgstr "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]"
+
+#: builtins.c:142
+msgid "unset [-f] [-v] [-n] [name ...]"
+msgstr "unset [-f] [-v] [-n] [name ...]"
+
+#: builtins.c:144
+msgid "export [-fn] [name[=value] ...] or export -p"
+msgstr "export [-fn] [name[=value] ...] ή export -p"
+
+#: builtins.c:146
+msgid "readonly [-aAf] [name[=value] ...] or readonly -p"
+msgstr "readonly [-aAf] [name[=value] ...] ή readonly -p"
+
+#: builtins.c:148
+msgid "shift [n]"
+msgstr "shift [n]"
+
+#: builtins.c:150
+msgid "source filename [arguments]"
+msgstr "source filename [arguments]"
+
+#: builtins.c:152
+msgid ". filename [arguments]"
+msgstr ". όνομα αρχείου [ορίσματα]"
+
+#: builtins.c:155
+msgid "suspend [-f]"
+msgstr "suspend [-f]"
+
+#: builtins.c:158
+msgid "test [expr]"
+msgstr "test [expr]"
+
+#: builtins.c:160
+msgid "[ arg... ]"
+msgstr "[ arg... ]"
+
+#: builtins.c:162
+msgid "times"
+msgstr "times"
+
+#: builtins.c:164
+msgid "trap [-lp] [[arg] signal_spec ...]"
+msgstr "trap [-lp] [[arg] signal_spec ...]"
+
+#: builtins.c:166
+msgid "type [-afptP] name [name ...]"
+msgstr "type [-afptP] name [name ...]"
+
+#: builtins.c:169
+msgid "ulimit [-SHabcdefilmnpqrstuvxT] [limit]"
+msgstr "ulimit [-SHabcdefilmnpqrstuvxT] [limit]"
+
+#: builtins.c:172
+msgid "umask [-p] [-S] [mode]"
+msgstr "umask [-p] [-S] [mode]"
+
+#: builtins.c:175
+msgid "wait [-n] [id ...]"
+msgstr "wait [-n] [id ...]"
+
+#: builtins.c:179
+msgid "wait [pid ...]"
+msgstr "wait [pid ...]"
+
+#: builtins.c:182
+msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
+msgstr "for NAME [in WORDS ... ] ; do COMMANDS; done"
+
+#: builtins.c:184
+msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+msgstr "for (( exp1; exp2; exp3 )); do COMMANDS; done"
+
+#: builtins.c:186
+msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
+msgstr "select NAME [in WORDS ... ;] do COMMANDS; done"
+
+#: builtins.c:188
+msgid "time [-p] pipeline"
+msgstr "time [-p] pipeline"
+
+#: builtins.c:190
+msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+msgstr "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
+
+#: builtins.c:192
+msgid "if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else COMMANDS; ] fi"
+msgstr "if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else COMMANDS; ] fi"
+
+#: builtins.c:194
+msgid "while COMMANDS; do COMMANDS; done"
+msgstr "while COMMANDS; do COMMANDS; done"
+
+#: builtins.c:196
+msgid "until COMMANDS; do COMMANDS; done"
+msgstr "until COMMANDS; do COMMANDS; done"
+
+#: builtins.c:198
+msgid "coproc [NAME] command [redirections]"
+msgstr "coproc [NAME] command [redirections]"
+
+#: builtins.c:200
+msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
+msgstr "function name { COMMANDS ; } ή name () { COMMANDS ; }"
+
+#: builtins.c:202
+msgid "{ COMMANDS ; }"
+msgstr "{ COMMANDS ; }"
+
+#: builtins.c:204
+msgid "job_spec [&]"
+msgstr "job_spec [&]"
+
+#: builtins.c:206
+msgid "(( expression ))"
+msgstr "(( expression ))"
+
+#: builtins.c:208
+msgid "[[ expression ]]"
+msgstr "[[ expression ]]"
+
+#: builtins.c:210
+msgid "variables - Names and meanings of some shell variables"
+msgstr "variables - Ονόματα και σημασία ορισμένων μεταβλητών του κελύφους"
+
+#: builtins.c:213
+msgid "pushd [-n] [+N | -N | dir]"
+msgstr "pushd [-n] [+N | -N | dir]"
+
+#: builtins.c:217
+msgid "popd [-n] [+N | -N]"
+msgstr "popd [-n] [+N | -N]"
+
+#: builtins.c:221
+msgid "dirs [-clpv] [+N] [-N]"
+msgstr "dirs [-clpv] [+N] [-N]"
+
+#: builtins.c:224
+msgid "shopt [-pqsu] [-o] [optname ...]"
+msgstr "shopt [-pqsu] [-o] [optname ...]"
+
+#: builtins.c:226
+msgid "printf [-v var] format [arguments]"
+msgstr "printf [-v var] format [ορίσματα]"
+
+#: builtins.c:229
+msgid "complete [-abcdefgjksuv] [-pr] [-DE] [-o option] [-A action] [-G globpat] [-W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [name ...]"
+msgstr "complete [-abcdefgjksuv] [-pr] [-DE] [-o option] [-A action] [-G globpat] [-W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [name ...]"
+
+#: builtins.c:233
+msgid "compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+msgstr "compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
+
+#: builtins.c:237
+msgid "compopt [-o|+o option] [-DE] [name ...]"
+msgstr "compopt [-o|+o option] [-DE] [name ...]"
+
+#: builtins.c:240
+msgid "mapfile [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c quantum] [array]"
+msgstr "mapfile [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c quantum] [array]"
+
+#: builtins.c:242
+msgid "readarray [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c quantum] [array]"
+msgstr "readarray [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c quantum] [array]"
+
+#: builtins.c:254
+msgid ""
+"Define or display aliases.\n"
+" \n"
+" Without arguments, `alias' prints the list of aliases in the reusable\n"
+" form `alias NAME=VALUE' on standard output.\n"
+" \n"
+" Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
+" A trailing space in VALUE causes the next word to be checked for\n"
+" alias substitution when the alias is expanded.\n"
+" \n"
+" Options:\n"
+" -p\tPrint all defined aliases in a reusable format\n"
+" \n"
+" Exit Status:\n"
+" alias returns true unless a NAME is supplied for which no alias has been\n"
+" defined."
+msgstr ""
+
+#: builtins.c:276
+msgid ""
+"Remove each NAME from the list of defined aliases.\n"
+" \n"
+" Options:\n"
+" -a\tremove all alias definitions.\n"
+" \n"
+" Return success unless a NAME is not an existing alias."
+msgstr ""
+"Αφαίρεση κάθε ΟΝΟΜΑτος από τη λίστα των καθορισμένων ψευδωνήμων.\n"
+" \n"
+" Επιλογές:\n"
+" -a\tαφαίρεση όλων των ψευδωνήμων.\n"
+" \n"
+" Επιστρέφει επιτυχία εκτός αν το ΟΝΟΜΑ δεν είναι υπάρχον ψευδώνημο."
+
+#: builtins.c:289
+msgid ""
+"Set Readline key bindings and variables.\n"
+" \n"
+" Bind a key sequence to a Readline function or a macro, or set a\n"
+" Readline variable. The non-option argument syntax is equivalent to\n"
+" that found in ~/.inputrc, but must be passed as a single argument:\n"
+" e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
+" \n"
+" Options:\n"
+" -m keymap Use KEYMAP as the keymap for the duration of this\n"
+" command. Acceptable keymap names are emacs,\n"
+" emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move,\n"
+" vi-command, and vi-insert.\n"
+" -l List names of functions.\n"
+" -P List function names and bindings.\n"
+" -p List functions and bindings in a form that can be\n"
+" reused as input.\n"
+" -S List key sequences that invoke macros and their values\n"
+" -s List key sequences that invoke macros and their values\n"
+" in a form that can be reused as input.\n"
+" -V List variable names and values\n"
+" -v List variable names and values in a form that can\n"
+" be reused as input.\n"
+" -q function-name Query about which keys invoke the named function.\n"
+" -u function-name Unbind all keys which are bound to the named function.\n"
+" -r keyseq Remove the binding for KEYSEQ.\n"
+" -f filename Read key bindings from FILENAME.\n"
+" -x keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
+" \t\t\t\tKEYSEQ is entered.\n"
+" -X\t\t List key sequences bound with -x and associated commands\n"
+" in a form that can be reused as input.\n"
+" \n"
+" Exit Status:\n"
+" bind returns 0 unless an unrecognized option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:328
+msgid ""
+"Exit for, while, or until loops.\n"
+" \n"
+" Exit a FOR, WHILE or UNTIL loop. If N is specified, break N enclosing\n"
+" loops.\n"
+" \n"
+" Exit Status:\n"
+" The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+
+#: builtins.c:340
+msgid ""
+"Resume for, while, or until loops.\n"
+" \n"
+" Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
+" If N is specified, resumes the Nth enclosing loop.\n"
+" \n"
+" Exit Status:\n"
+" The exit status is 0 unless N is not greater than or equal to 1."
+msgstr ""
+
+#: builtins.c:352
+msgid ""
+"Execute shell builtins.\n"
+" \n"
+" Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
+" lookup. This is useful when you wish to reimplement a shell builtin\n"
+" as a shell function, but need to execute the builtin within the function.\n"
+" \n"
+" Exit Status:\n"
+" Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
+" not a shell builtin.."
+msgstr ""
+
+#: builtins.c:367
+msgid ""
+"Return the context of the current subroutine call.\n"
+" \n"
+" Without EXPR, returns \"$line $filename\". With EXPR, returns\n"
+" \"$line $subroutine $filename\"; this extra information can be used to\n"
+" provide a stack trace.\n"
+" \n"
+" The value of EXPR indicates how many call frames to go back before the\n"
+" current one; the top frame is frame 0.\n"
+" \n"
+" Exit Status:\n"
+" Returns 0 unless the shell is not executing a shell function or EXPR\n"
+" is invalid."
+msgstr ""
+
+#: builtins.c:385
+msgid ""
+"Change the shell working directory.\n"
+" \n"
+" Change the current directory to DIR. The default DIR is the value of the\n"
+" HOME shell variable.\n"
+" \n"
+" The variable CDPATH defines the search path for the directory containing\n"
+" DIR. Alternative directory names in CDPATH are separated by a colon (:).\n"
+" A null directory name is the same as the current directory. If DIR begins\n"
+" with a slash (/), then CDPATH is not used.\n"
+" \n"
+" If the directory is not found, and the shell option `cdable_vars' is set,\n"
+" the word is assumed to be a variable name. If that variable has a value,\n"
+" its value is used for DIR.\n"
+" \n"
+" Options:\n"
+" -L\tforce symbolic links to be followed: resolve symbolic links in\n"
+" \tDIR after processing instances of `..'\n"
+" -P\tuse the physical directory structure without following symbolic\n"
+" \tlinks: resolve symbolic links in DIR before processing instances\n"
+" \tof `..'\n"
+" -e\tif the -P option is supplied, and the current working directory\n"
+" \tcannot be determined successfully, exit with a non-zero status\n"
+" \n"
+" The default is to follow symbolic links, as if `-L' were specified.\n"
+" `..' is processed by removing the immediately previous pathname component\n"
+" back to a slash or the beginning of DIR.\n"
+" \n"
+" Exit Status:\n"
+" Returns 0 if the directory is changed, and if $PWD is set successfully when\n"
+" -P is used; non-zero otherwise."
+msgstr ""
+
+#: builtins.c:420
+#, fuzzy
+msgid ""
+"Print the name of the current working directory.\n"
+" \n"
+" Options:\n"
+" -L\tprint the value of $PWD if it names the current working\n"
+" \tdirectory\n"
+" -P\tprint the physical directory, without any symbolic links\n"
+" \n"
+" By default, `pwd' behaves as if `-L' were specified.\n"
+" \n"
+" Exit Status:\n"
+" Returns 0 unless an invalid option is given or the current directory\n"
+" cannot be read."
+msgstr ""
+"Εμφάνιση του ονόματος του τρέχοντος καταλόγου εργασίας.\n"
+" \n"
+" Επιλογές:\n"
+" -L\tεμφάνιση της τιμής της $PWD if it names the current working\n"
+" \tdirectory\n"
+" -P\tεμφάνιση του φυσικού καταλόγου, χωρίς συμβολικούς συνδέσμους\n"
+" \n"
+" Από προεπιλογή, η «pwd» συμπεριφέρεται σαν να είχε δωθεί «-L» .\n"
+" \n"
+" Κατάσταση εξόδου:\n"
+" Επιστρέφει 0 εκτός αν δίνεται μη έγκυρη επιλογή ή ο τρέχων κατάλογος\n"
+" δεν μπορεί να διαβαστεί."
+
+#: builtins.c:437
+msgid ""
+"Null command.\n"
+" \n"
+" No effect; the command does nothing.\n"
+" \n"
+" Exit Status:\n"
+" Always succeeds."
+msgstr ""
+"Εντολή Null.\n"
+" \n"
+" Κανένα αποτέλεσμα, η εντολή δεν κάνει τίποτα.\n"
+" \n"
+" Κατάσταση εξόδου:\n"
+" Πάντα επιτυχία."
+
+#: builtins.c:448
+msgid ""
+"Return a successful result.\n"
+" \n"
+" Exit Status:\n"
+" Always succeeds."
+msgstr ""
+
+#: builtins.c:457
+msgid ""
+"Return an unsuccessful result.\n"
+" \n"
+" Exit Status:\n"
+" Always fails."
+msgstr ""
+
+#: builtins.c:466
+msgid ""
+"Execute a simple command or display information about commands.\n"
+" \n"
+" Runs COMMAND with ARGS suppressing shell function lookup, or display\n"
+" information about the specified COMMANDs. Can be used to invoke commands\n"
+" on disk when a function with the same name exists.\n"
+" \n"
+" Options:\n"
+" -p\tuse a default value for PATH that is guaranteed to find all of\n"
+" \tthe standard utilities\n"
+" -v\tprint a description of COMMAND similar to the `type' builtin\n"
+" -V\tprint a more verbose description of each COMMAND\n"
+" \n"
+" Exit Status:\n"
+" Returns exit status of COMMAND, or failure if COMMAND is not found."
+msgstr ""
+
+#: builtins.c:485
+msgid ""
+"Set variable values and attributes.\n"
+" \n"
+" Declare variables and give them attributes. If no NAMEs are given,\n"
+" display the attributes and values of all variables.\n"
+" \n"
+" Options:\n"
+" -f\trestrict action or display to function names and definitions\n"
+" -F\trestrict display to function names only (plus line number and\n"
+" \tsource file when debugging)\n"
+" -g\tcreate global variables when used in a shell function; otherwise\n"
+" \tignored\n"
+" -p\tdisplay the attributes and value of each NAME\n"
+" \n"
+" Options which set attributes:\n"
+" -a\tto make NAMEs indexed arrays (if supported)\n"
+" -A\tto make NAMEs associative arrays (if supported)\n"
+" -i\tto make NAMEs have the `integer' attribute\n"
+" -l\tto convert NAMEs to lower case on assignment\n"
+" -n\tmake NAME a reference to the variable named by its value\n"
+" -r\tto make NAMEs readonly\n"
+" -t\tto make NAMEs have the `trace' attribute\n"
+" -u\tto convert NAMEs to upper case on assignment\n"
+" -x\tto make NAMEs export\n"
+" \n"
+" Using `+' instead of `-' turns off the given attribute.\n"
+" \n"
+" Variables with the integer attribute have arithmetic evaluation (see\n"
+" the `let' command) performed when the variable is assigned a value.\n"
+" \n"
+" When used in a function, `declare' makes NAMEs local, as with the `local'\n"
+" command. The `-g' option suppresses this behavior.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid option is supplied or a variable\n"
+" assignment error occurs."
+msgstr ""
+
+#: builtins.c:525
+msgid ""
+"Set variable values and attributes.\n"
+" \n"
+" Obsolete. See `help declare'."
+msgstr ""
+
+#: builtins.c:533
+msgid ""
+"Define local variables.\n"
+" \n"
+" Create a local variable called NAME, and give it VALUE. OPTION can\n"
+" be any option accepted by `declare'.\n"
+" \n"
+" Local variables can only be used within a function; they are visible\n"
+" only to the function where they are defined and its children.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid option is supplied, a variable\n"
+" assignment error occurs, or the shell is not executing a function."
+msgstr ""
+
+#: builtins.c:550
+msgid ""
+"Write arguments to the standard output.\n"
+" \n"
+" Display the ARGs, separated by a single space character and followed by a\n"
+" newline, on the standard output.\n"
+" \n"
+" Options:\n"
+" -n\tdo not append a newline\n"
+" -e\tenable interpretation of the following backslash escapes\n"
+" -E\texplicitly suppress interpretation of backslash escapes\n"
+" \n"
+" `echo' interprets the following backslash-escaped characters:\n"
+" \\a\talert (bell)\n"
+" \\b\tbackspace\n"
+" \\c\tsuppress further output\n"
+" \\e\tescape character\n"
+" \\E\tescape character\n"
+" \\f\tform feed\n"
+" \\n\tnew line\n"
+" \\r\tcarriage return\n"
+" \\t\thorizontal tab\n"
+" \\v\tvertical tab\n"
+" \\\\\tbackslash\n"
+" \\0nnn\tthe character whose ASCII code is NNN (octal). NNN can be\n"
+" \t0 to 3 octal digits\n"
+" \\xHH\tthe eight-bit character whose value is HH (hexadecimal). HH\n"
+" \tcan be one or two hex digits\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless a write error occurs."
+msgstr ""
+
+#: builtins.c:586
+msgid ""
+"Write arguments to the standard output.\n"
+" \n"
+" Display the ARGs on the standard output followed by a newline.\n"
+" \n"
+" Options:\n"
+" -n\tdo not append a newline\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless a write error occurs."
+msgstr ""
+
+#: builtins.c:601
+msgid ""
+"Enable and disable shell builtins.\n"
+" \n"
+" Enables and disables builtin shell commands. Disabling allows you to\n"
+" execute a disk command which has the same name as a shell builtin\n"
+" without using a full pathname.\n"
+" \n"
+" Options:\n"
+" -a\tprint a list of builtins showing whether or not each is enabled\n"
+" -n\tdisable each NAME or display a list of disabled builtins\n"
+" -p\tprint the list of builtins in a reusable format\n"
+" -s\tprint only the names of Posix `special' builtins\n"
+" \n"
+" Options controlling dynamic loading:\n"
+" -f\tLoad builtin NAME from shared object FILENAME\n"
+" -d\tRemove a builtin loaded with -f\n"
+" \n"
+" Without options, each NAME is enabled.\n"
+" \n"
+" To use the `test' found in $PATH instead of the shell builtin\n"
+" version, type `enable -n test'.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless NAME is not a shell builtin or an error occurs."
+msgstr ""
+
+#: builtins.c:629
+msgid ""
+"Execute arguments as a shell command.\n"
+" \n"
+" Combine ARGs into a single string, use the result as input to the shell,\n"
+" and execute the resulting commands.\n"
+" \n"
+" Exit Status:\n"
+" Returns exit status of command or success if command is null."
+msgstr ""
+
+#: builtins.c:641
+msgid ""
+"Parse option arguments.\n"
+" \n"
+" Getopts is used by shell procedures to parse positional parameters\n"
+" as options.\n"
+" \n"
+" OPTSTRING contains the option letters to be recognized; if a letter\n"
+" is followed by a colon, the option is expected to have an argument,\n"
+" which should be separated from it by white space.\n"
+" \n"
+" Each time it is invoked, getopts will place the next option in the\n"
+" shell variable $name, initializing name if it does not exist, and\n"
+" the index of the next argument to be processed into the shell\n"
+" variable OPTIND. OPTIND is initialized to 1 each time the shell or\n"
+" a shell script is invoked. When an option requires an argument,\n"
+" getopts places that argument into the shell variable OPTARG.\n"
+" \n"
+" getopts reports errors in one of two ways. If the first character\n"
+" of OPTSTRING is a colon, getopts uses silent error reporting. In\n"
+" this mode, no error messages are printed. If an invalid option is\n"
+" seen, getopts places the option character found into OPTARG. If a\n"
+" required argument is not found, getopts places a ':' into NAME and\n"
+" sets OPTARG to the option character found. If getopts is not in\n"
+" silent mode, and an invalid option is seen, getopts places '?' into\n"
+" NAME and unsets OPTARG. If a required argument is not found, a '?'\n"
+" is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
+" printed.\n"
+" \n"
+" If the shell variable OPTERR has the value 0, getopts disables the\n"
+" printing of error messages, even if the first character of\n"
+" OPTSTRING is not a colon. OPTERR has the value 1 by default.\n"
+" \n"
+" Getopts normally parses the positional parameters ($0 - $9), but if\n"
+" more arguments are given, they are parsed instead.\n"
+" \n"
+" Exit Status:\n"
+" Returns success if an option is found; fails if the end of options is\n"
+" encountered or an error occurs."
+msgstr ""
+
+#: builtins.c:683
+msgid ""
+"Replace the shell with the given command.\n"
+" \n"
+" Execute COMMAND, replacing this shell with the specified program.\n"
+" ARGUMENTS become the arguments to COMMAND. If COMMAND is not specified,\n"
+" any redirections take effect in the current shell.\n"
+" \n"
+" Options:\n"
+" -a name\tpass NAME as the zeroth argument to COMMAND\n"
+" -c\t\texecute COMMAND with an empty environment\n"
+" -l\t\tplace a dash in the zeroth argument to COMMAND\n"
+" \n"
+" If the command cannot be executed, a non-interactive shell exits, unless\n"
+" the shell option `execfail' is set.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless COMMAND is not found or a redirection error occurs."
+msgstr ""
+
+#: builtins.c:704
+msgid ""
+"Exit the shell.\n"
+" \n"
+" Exits the shell with a status of N. If N is omitted, the exit status\n"
+" is that of the last command executed."
+msgstr ""
+
+#: builtins.c:713
+msgid ""
+"Exit a login shell.\n"
+" \n"
+" Exits a login shell with exit status N. Returns an error if not executed\n"
+" in a login shell."
+msgstr ""
+
+#: builtins.c:723
+msgid ""
+"Display or execute commands from the history list.\n"
+" \n"
+" fc is used to list or edit and re-execute commands from the history list.\n"
+" FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
+" string, which means the most recent command beginning with that\n"
+" string.\n"
+" \n"
+" Options:\n"
+" -e ENAME\tselect which editor to use. Default is FCEDIT, then EDITOR,\n"
+" \t\tthen vi\n"
+" -l \tlist lines instead of editing\n"
+" -n\tomit line numbers when listing\n"
+" -r\treverse the order of the lines (newest listed first)\n"
+" \n"
+" With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
+" re-executed after the substitution OLD=NEW is performed.\n"
+" \n"
+" A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
+" runs the last command beginning with `cc' and typing `r' re-executes\n"
+" the last command.\n"
+" \n"
+" Exit Status:\n"
+" Returns success or status of executed command; non-zero if an error occurs."
+msgstr ""
+
+#: builtins.c:753
+msgid ""
+"Move job to the foreground.\n"
+" \n"
+" Place the job identified by JOB_SPEC in the foreground, making it the\n"
+" current job. If JOB_SPEC is not present, the shell's notion of the\n"
+" current job is used.\n"
+" \n"
+" Exit Status:\n"
+" Status of command placed in foreground, or failure if an error occurs."
+msgstr ""
+
+#: builtins.c:768
+msgid ""
+"Move jobs to the background.\n"
+" \n"
+" Place the jobs identified by each JOB_SPEC in the background, as if they\n"
+" had been started with `&'. If JOB_SPEC is not present, the shell's notion\n"
+" of the current job is used.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+
+#: builtins.c:782
+msgid ""
+"Remember or display program locations.\n"
+" \n"
+" Determine and remember the full pathname of each command NAME. If\n"
+" no arguments are given, information about remembered commands is displayed.\n"
+" \n"
+" Options:\n"
+" -d\t\tforget the remembered location of each NAME\n"
+" -l\t\tdisplay in a format that may be reused as input\n"
+" -p pathname\tuse PATHNAME is the full pathname of NAME\n"
+" -r\t\tforget all remembered locations\n"
+" -t\t\tprint the remembered location of each NAME, preceding\n"
+" \t\teach location with the corresponding NAME if multiple\n"
+" \t\tNAMEs are given\n"
+" Arguments:\n"
+" NAME\t\tEach NAME is searched for in $PATH and added to the list\n"
+" \t\tof remembered commands.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless NAME is not found or an invalid option is given."
+msgstr ""
+
+#: builtins.c:807
+msgid ""
+"Display information about builtin commands.\n"
+" \n"
+" Displays brief summaries of builtin commands. If PATTERN is\n"
+" specified, gives detailed help on all commands matching PATTERN,\n"
+" otherwise the list of help topics is printed.\n"
+" \n"
+" Options:\n"
+" -d\toutput short description for each topic\n"
+" -m\tdisplay usage in pseudo-manpage format\n"
+" -s\toutput only a short usage synopsis for each topic matching\n"
+" \tPATTERN\n"
+" \n"
+" Arguments:\n"
+" PATTERN\tPattern specifiying a help topic\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless PATTERN is not found or an invalid option is given."
+msgstr ""
+
+#: builtins.c:831
+msgid ""
+"Display or manipulate the history list.\n"
+" \n"
+" Display the history list with line numbers, prefixing each modified\n"
+" entry with a `*'. An argument of N lists only the last N entries.\n"
+" \n"
+" Options:\n"
+" -c\tclear the history list by deleting all of the entries\n"
+" -d offset\tdelete the history entry at offset OFFSET.\n"
+" \n"
+" -a\tappend history lines from this session to the history file\n"
+" -n\tread all history lines not already read from the history file\n"
+" -r\tread the history file and append the contents to the history\n"
+" \tlist\n"
+" -w\twrite the current history to the history file\n"
+" \tand append them to the history list\n"
+" \n"
+" -p\tperform history expansion on each ARG and display the result\n"
+" \twithout storing it in the history list\n"
+" -s\tappend the ARGs to the history list as a single entry\n"
+" \n"
+" If FILENAME is given, it is used as the history file. Otherwise,\n"
+" if $HISTFILE has a value, that is used, else ~/.bash_history.\n"
+" \n"
+" If the $HISTTIMEFORMAT variable is set and not null, its value is used\n"
+" as a format string for strftime(3) to print the time stamp associated\n"
+" with each displayed history entry. No time stamps are printed otherwise.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:867
+msgid ""
+"Display status of jobs.\n"
+" \n"
+" Lists the active jobs. JOBSPEC restricts output to that job.\n"
+" Without options, the status of all active jobs is displayed.\n"
+" \n"
+" Options:\n"
+" -l\tlists process IDs in addition to the normal information\n"
+" -n\tlist only processes that have changed status since the last\n"
+" \tnotification\n"
+" -p\tlists process IDs only\n"
+" -r\trestrict output to running jobs\n"
+" -s\trestrict output to stopped jobs\n"
+" \n"
+" If -x is supplied, COMMAND is run after all job specifications that\n"
+" appear in ARGS have been replaced with the process ID of that job's\n"
+" process group leader.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid option is given or an error occurs.\n"
+" If -x is used, returns the exit status of COMMAND."
+msgstr ""
+
+#: builtins.c:894
+msgid ""
+"Remove jobs from current shell.\n"
+" \n"
+" Removes each JOBSPEC argument from the table of active jobs. Without\n"
+" any JOBSPECs, the shell uses its notion of the current job.\n"
+" \n"
+" Options:\n"
+" -a\tremove all jobs if JOBSPEC is not supplied\n"
+" -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
+" \tshell receives a SIGHUP\n"
+" -r\tremove only running jobs\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid option or JOBSPEC is given."
+msgstr ""
+
+#: builtins.c:913
+msgid ""
+"Send a signal to a job.\n"
+" \n"
+" Send the processes identified by PID or JOBSPEC the signal named by\n"
+" SIGSPEC or SIGNUM. If neither SIGSPEC nor SIGNUM is present, then\n"
+" SIGTERM is assumed.\n"
+" \n"
+" Options:\n"
+" -s sig\tSIG is a signal name\n"
+" -n sig\tSIG is a signal number\n"
+" -l\tlist the signal names; if arguments follow `-l' they are\n"
+" \tassumed to be signal numbers for which names should be listed\n"
+" \n"
+" Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
+" instead of process IDs, and allows processes to be killed if the limit\n"
+" on processes that you can create is reached.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid option is given or an error occurs."
+msgstr ""
+
+#: builtins.c:936
+msgid ""
+"Evaluate arithmetic expressions.\n"
+" \n"
+" Evaluate each ARG as an arithmetic expression. Evaluation is done in\n"
+" fixed-width integers with no check for overflow, though division by 0\n"
+" is trapped and flagged as an error. The following list of operators is\n"
+" grouped into levels of equal-precedence operators. The levels are listed\n"
+" in order of decreasing precedence.\n"
+" \n"
+" \tid++, id--\tvariable post-increment, post-decrement\n"
+" \t++id, --id\tvariable pre-increment, pre-decrement\n"
+" \t-, +\t\tunary minus, plus\n"
+" \t!, ~\t\tlogical and bitwise negation\n"
+" \t**\t\texponentiation\n"
+" \t*, /, %\t\tmultiplication, division, remainder\n"
+" \t+, -\t\taddition, subtraction\n"
+" \t<<, >>\t\tleft and right bitwise shifts\n"
+" \t<=, >=, <, >\tcomparison\n"
+" \t==, !=\t\tequality, inequality\n"
+" \t&\t\tbitwise AND\n"
+" \t^\t\tbitwise XOR\n"
+" \t|\t\tbitwise OR\n"
+" \t&&\t\tlogical AND\n"
+" \t||\t\tlogical OR\n"
+" \texpr ? expr : expr\n"
+" \t\t\tconditional operator\n"
+" \t=, *=, /=, %=,\n"
+" \t+=, -=, <<=, >>=,\n"
+" \t&=, ^=, |=\tassignment\n"
+" \n"
+" Shell variables are allowed as operands. The name of the variable\n"
+" is replaced by its value (coerced to a fixed-width integer) within\n"
+" an expression. The variable need not have its integer attribute\n"
+" turned on to be used in an expression.\n"
+" \n"
+" Operators are evaluated in order of precedence. Sub-expressions in\n"
+" parentheses are evaluated first and may override the precedence\n"
+" rules above.\n"
+" \n"
+" Exit Status:\n"
+" If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:981
+msgid ""
+"Read a line from the standard input and split it into fields.\n"
+" \n"
+" Reads a single line from the standard input, or from file descriptor FD\n"
+" if the -u option is supplied. The line is split into fields as with word\n"
+" splitting, and the first word is assigned to the first NAME, the second\n"
+" word to the second NAME, and so on, with any leftover words assigned to\n"
+" the last NAME. Only the characters found in $IFS are recognized as word\n"
+" delimiters.\n"
+" \n"
+" If no NAMEs are supplied, the line read is stored in the REPLY variable.\n"
+" \n"
+" Options:\n"
+" -a array\tassign the words read to sequential indices of the array\n"
+" \t\tvariable ARRAY, starting at zero\n"
+" -d delim\tcontinue until the first character of DELIM is read, rather\n"
+" \t\tthan newline\n"
+" -e\t\tuse Readline to obtain the line in an interactive shell\n"
+" -i text\tUse TEXT as the initial text for Readline\n"
+" -n nchars\treturn after reading NCHARS characters rather than waiting\n"
+" \t\tfor a newline, but honor a delimiter if fewer than NCHARS\n"
+" \t\tcharacters are read before the delimiter\n"
+" -N nchars\treturn only after reading exactly NCHARS characters, unless\n"
+" \t\tEOF is encountered or read times out, ignoring any delimiter\n"
+" -p prompt\toutput the string PROMPT without a trailing newline before\n"
+" \t\tattempting to read\n"
+" -r\t\tdo not allow backslashes to escape any characters\n"
+" -s\t\tdo not echo input coming from a terminal\n"
+" -t timeout\ttime out and return failure if a complete line of input is\n"
+" \t\tnot read within TIMEOUT seconds. The value of the TMOUT\n"
+" \t\tvariable is the default timeout. TIMEOUT may be a\n"
+" \t\tfractional number. If TIMEOUT is 0, read returns immediately,\n"
+" \t\twithout trying to read any data, returning success only if\n"
+" \t\tinput is available on the specified file descriptor. The\n"
+" \t\texit status is greater than 128 if the timeout is exceeded\n"
+" -u fd\t\tread from file descriptor FD instead of the standard input\n"
+" \n"
+" Exit Status:\n"
+" The return code is zero, unless end-of-file is encountered, read times out\n"
+" (in which case it's greater than 128), a variable assignment error occurs,\n"
+" or an invalid file descriptor is supplied as the argument to -u."
+msgstr ""
+
+#: builtins.c:1026
+msgid ""
+"Return from a shell function.\n"
+" \n"
+" Causes a function or sourced script to exit with the return value\n"
+" specified by N. If N is omitted, the return status is that of the\n"
+" last command executed within the function or script.\n"
+" \n"
+" Exit Status:\n"
+" Returns N, or failure if the shell is not executing a function or script."
+msgstr ""
+
+#: builtins.c:1039
+msgid ""
+"Set or unset values of shell options and positional parameters.\n"
+" \n"
+" Change the value of shell attributes and positional parameters, or\n"
+" display the names and values of shell variables.\n"
+" \n"
+" Options:\n"
+" -a Mark variables which are modified or created for export.\n"
+" -b Notify of job termination immediately.\n"
+" -e Exit immediately if a command exits with a non-zero status.\n"
+" -f Disable file name generation (globbing).\n"
+" -h Remember the location of commands as they are looked up.\n"
+" -k All assignment arguments are placed in the environment for a\n"
+" command, not just those that precede the command name.\n"
+" -m Job control is enabled.\n"
+" -n Read commands but do not execute them.\n"
+" -o option-name\n"
+" Set the variable corresponding to option-name:\n"
+" allexport same as -a\n"
+" braceexpand same as -B\n"
+" emacs use an emacs-style line editing interface\n"
+" errexit same as -e\n"
+" errtrace same as -E\n"
+" functrace same as -T\n"
+" hashall same as -h\n"
+" histexpand same as -H\n"
+" history enable command history\n"
+" ignoreeof the shell will not exit upon reading EOF\n"
+" interactive-comments\n"
+" allow comments to appear in interactive commands\n"
+" keyword same as -k\n"
+" monitor same as -m\n"
+" noclobber same as -C\n"
+" noexec same as -n\n"
+" noglob same as -f\n"
+" nolog currently accepted but ignored\n"
+" notify same as -b\n"
+" nounset same as -u\n"
+" onecmd same as -t\n"
+" physical same as -P\n"
+" pipefail the return value of a pipeline is the status of\n"
+" the last command to exit with a non-zero status,\n"
+" or zero if no command exited with a non-zero status\n"
+" posix change the behavior of bash where the default\n"
+" operation differs from the Posix standard to\n"
+" match the standard\n"
+" privileged same as -p\n"
+" verbose same as -v\n"
+" vi use a vi-style line editing interface\n"
+" xtrace same as -x\n"
+" -p Turned on whenever the real and effective user ids do not match.\n"
+" Disables processing of the $ENV file and importing of shell\n"
+" functions. Turning this option off causes the effective uid and\n"
+" gid to be set to the real uid and gid.\n"
+" -t Exit after reading and executing one command.\n"
+" -u Treat unset variables as an error when substituting.\n"
+" -v Print shell input lines as they are read.\n"
+" -x Print commands and their arguments as they are executed.\n"
+" -B the shell will perform brace expansion\n"
+" -C If set, disallow existing regular files to be overwritten\n"
+" by redirection of output.\n"
+" -E If set, the ERR trap is inherited by shell functions.\n"
+" -H Enable ! style history substitution. This flag is on\n"
+" by default when the shell is interactive.\n"
+" -P If set, do not resolve symbolic links when executing commands\n"
+" such as cd which change the current directory.\n"
+" -T If set, the DEBUG trap is inherited by shell functions.\n"
+" -- Assign any remaining arguments to the positional parameters.\n"
+" If there are no remaining arguments, the positional parameters\n"
+" are unset.\n"
+" - Assign any remaining arguments to the positional parameters.\n"
+" The -x and -v options are turned off.\n"
+" \n"
+" Using + rather than - causes these flags to be turned off. The\n"
+" flags can also be used upon invocation of the shell. The current\n"
+" set of flags may be found in $-. The remaining n ARGs are positional\n"
+" parameters and are assigned, in order, to $1, $2, .. $n. If no\n"
+" ARGs are given, all shell variables are printed.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid option is given."
+msgstr ""
+
+#: builtins.c:1124
+msgid ""
+"Unset values and attributes of shell variables and functions.\n"
+" \n"
+" For each NAME, remove the corresponding variable or function.\n"
+" \n"
+" Options:\n"
+" -f\ttreat each NAME as a shell function\n"
+" -v\ttreat each NAME as a shell variable\n"
+" -n\ttreat each NAME as a name reference and unset the variable itself\n"
+" \trather than the variable it references\n"
+" \n"
+" Without options, unset first tries to unset a variable, and if that fails,\n"
+" tries to unset a function.\n"
+" \n"
+" Some variables cannot be unset; also see `readonly'.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid option is given or a NAME is read-only."
+msgstr ""
+
+#: builtins.c:1146
+msgid ""
+"Set export attribute for shell variables.\n"
+" \n"
+" Marks each NAME for automatic export to the environment of subsequently\n"
+" executed commands. If VALUE is supplied, assign VALUE before exporting.\n"
+" \n"
+" Options:\n"
+" -f\trefer to shell functions\n"
+" -n\tremove the export property from each NAME\n"
+" -p\tdisplay a list of all exported variables and functions\n"
+" \n"
+" An argument of `--' disables further option processing.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1165
+msgid ""
+"Mark shell variables as unchangeable.\n"
+" \n"
+" Mark each NAME as read-only; the values of these NAMEs may not be\n"
+" changed by subsequent assignment. If VALUE is supplied, assign VALUE\n"
+" before marking as read-only.\n"
+" \n"
+" Options:\n"
+" -a\trefer to indexed array variables\n"
+" -A\trefer to associative array variables\n"
+" -f\trefer to shell functions\n"
+" -p\tdisplay a list of all readonly variables and functions\n"
+" \n"
+" An argument of `--' disables further option processing.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid option is given or NAME is invalid."
+msgstr ""
+
+#: builtins.c:1186
+msgid ""
+"Shift positional parameters.\n"
+" \n"
+" Rename the positional parameters $N+1,$N+2 ... to $1,$2 ... If N is\n"
+" not given, it is assumed to be 1.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless N is negative or greater than $#."
+msgstr ""
+
+#: builtins.c:1198 builtins.c:1213
+msgid ""
+"Execute commands from a file in the current shell.\n"
+" \n"
+" Read and execute commands from FILENAME in the current shell. The\n"
+" entries in $PATH are used to find the directory containing FILENAME.\n"
+" If any ARGUMENTS are supplied, they become the positional parameters\n"
+" when FILENAME is executed.\n"
+" \n"
+" Exit Status:\n"
+" Returns the status of the last command executed in FILENAME; fails if\n"
+" FILENAME cannot be read."
+msgstr ""
+
+#: builtins.c:1229
+msgid ""
+"Suspend shell execution.\n"
+" \n"
+" Suspend the execution of this shell until it receives a SIGCONT signal.\n"
+" Unless forced, login shells cannot be suspended.\n"
+" \n"
+" Options:\n"
+" -f\tforce the suspend, even if the shell is a login shell\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless job control is not enabled or an error occurs."
+msgstr ""
+
+#: builtins.c:1245
+msgid ""
+"Evaluate conditional expression.\n"
+" \n"
+" Exits with a status of 0 (true) or 1 (false) depending on\n"
+" the evaluation of EXPR. Expressions may be unary or binary. Unary\n"
+" expressions are often used to examine the status of a file. There\n"
+" are string operators and numeric comparison operators as well.\n"
+" \n"
+" The behavior of test depends on the number of arguments. Read the\n"
+" bash manual page for the complete specification.\n"
+" \n"
+" File operators:\n"
+" \n"
+" -a FILE True if file exists.\n"
+" -b FILE True if file is block special.\n"
+" -c FILE True if file is character special.\n"
+" -d FILE True if file is a directory.\n"
+" -e FILE True if file exists.\n"
+" -f FILE True if file exists and is a regular file.\n"
+" -g FILE True if file is set-group-id.\n"
+" -h FILE True if file is a symbolic link.\n"
+" -L FILE True if file is a symbolic link.\n"
+" -k FILE True if file has its `sticky' bit set.\n"
+" -p FILE True if file is a named pipe.\n"
+" -r FILE True if file is readable by you.\n"
+" -s FILE True if file exists and is not empty.\n"
+" -S FILE True if file is a socket.\n"
+" -t FD True if FD is opened on a terminal.\n"
+" -u FILE True if the file is set-user-id.\n"
+" -w FILE True if the file is writable by you.\n"
+" -x FILE True if the file is executable by you.\n"
+" -O FILE True if the file is effectively owned by you.\n"
+" -G FILE True if the file is effectively owned by your group.\n"
+" -N FILE True if the file has been modified since it was last read.\n"
+" \n"
+" FILE1 -nt FILE2 True if file1 is newer than file2 (according to\n"
+" modification date).\n"
+" \n"
+" FILE1 -ot FILE2 True if file1 is older than file2.\n"
+" \n"
+" FILE1 -ef FILE2 True if file1 is a hard link to file2.\n"
+" \n"
+" String operators:\n"
+" \n"
+" -z STRING True if string is empty.\n"
+" \n"
+" -n STRING\n"
+" STRING True if string is not empty.\n"
+" \n"
+" STRING1 = STRING2\n"
+" True if the strings are equal.\n"
+" STRING1 != STRING2\n"
+" True if the strings are not equal.\n"
+" STRING1 < STRING2\n"
+" True if STRING1 sorts before STRING2 lexicographically.\n"
+" STRING1 > STRING2\n"
+" True if STRING1 sorts after STRING2 lexicographically.\n"
+" \n"
+" Other operators:\n"
+" \n"
+" -o OPTION True if the shell option OPTION is enabled.\n"
+" -v VAR\t True if the shell variable VAR is set\n"
+" -R VAR\t True if the shell variable VAR is set and is a name reference.\n"
+" ! EXPR True if expr is false.\n"
+" EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
+" EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
+" \n"
+" arg1 OP arg2 Arithmetic tests. OP is one of -eq, -ne,\n"
+" -lt, -le, -gt, or -ge.\n"
+" \n"
+" Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
+" less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
+" than ARG2.\n"
+" \n"
+" Exit Status:\n"
+" Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
+" false or an invalid argument is given."
+msgstr ""
+
+#: builtins.c:1326
+msgid ""
+"Evaluate conditional expression.\n"
+" \n"
+" This is a synonym for the \"test\" builtin, but the last argument must\n"
+" be a literal `]', to match the opening `['."
+msgstr ""
+
+#: builtins.c:1335
+msgid ""
+"Display process times.\n"
+" \n"
+" Prints the accumulated user and system times for the shell and all of its\n"
+" child processes.\n"
+" \n"
+" Exit Status:\n"
+" Always succeeds."
+msgstr ""
+
+#: builtins.c:1347
+msgid ""
+"Trap signals and other events.\n"
+" \n"
+" Defines and activates handlers to be run when the shell receives signals\n"
+" or other conditions.\n"
+" \n"
+" ARG is a command to be read and executed when the shell receives the\n"
+" signal(s) SIGNAL_SPEC. If ARG is absent (and a single SIGNAL_SPEC\n"
+" is supplied) or `-', each specified signal is reset to its original\n"
+" value. If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
+" shell and by the commands it invokes.\n"
+" \n"
+" If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell. If\n"
+" a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command. If\n"
+" a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or a\n"
+" script run by the . or source builtins finishes executing. A SIGNAL_SPEC\n"
+" of ERR means to execute ARG each time a command's failure would cause the\n"
+" shell to exit when the -e option is enabled.\n"
+" \n"
+" If no arguments are supplied, trap prints the list of commands associated\n"
+" with each signal.\n"
+" \n"
+" Options:\n"
+" -l\tprint a list of signal names and their corresponding numbers\n"
+" -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
+" \n"
+" Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal number.\n"
+" Signal names are case insensitive and the SIG prefix is optional. A\n"
+" signal may be sent to the shell with \"kill -signal $$\".\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless a SIGSPEC is invalid or an invalid option is given."
+msgstr ""
+
+#: builtins.c:1383
+msgid ""
+"Display information about command type.\n"
+" \n"
+" For each NAME, indicate how it would be interpreted if used as a\n"
+" command name.\n"
+" \n"
+" Options:\n"
+" -a\tdisplay all locations containing an executable named NAME;\n"
+" \tincludes aliases, builtins, and functions, if and only if\n"
+" \tthe `-p' option is not also used\n"
+" -f\tsuppress shell function lookup\n"
+" -P\tforce a PATH search for each NAME, even if it is an alias,\n"
+" \tbuiltin, or function, and returns the name of the disk file\n"
+" \tthat would be executed\n"
+" -p\treturns either the name of the disk file that would be executed,\n"
+" \tor nothing if `type -t NAME' would not return `file'.\n"
+" -t\toutput a single word which is one of `alias', `keyword',\n"
+" \t`function', `builtin', `file' or `', if NAME is an alias, shell\n"
+" \treserved word, shell function, shell builtin, disk file, or not\n"
+" \tfound, respectively\n"
+" \n"
+" Arguments:\n"
+" NAME\tCommand name to be interpreted.\n"
+" \n"
+" Exit Status:\n"
+" Returns success if all of the NAMEs are found; fails if any are not found."
+msgstr ""
+
+#: builtins.c:1414
+msgid ""
+"Modify shell resource limits.\n"
+" \n"
+" Provides control over the resources available to the shell and processes\n"
+" it creates, on systems that allow such control.\n"
+" \n"
+" Options:\n"
+" -S\tuse the `soft' resource limit\n"
+" -H\tuse the `hard' resource limit\n"
+" -a\tall current limits are reported\n"
+" -b\tthe socket buffer size\n"
+" -c\tthe maximum size of core files created\n"
+" -d\tthe maximum size of a process's data segment\n"
+" -e\tthe maximum scheduling priority (`nice')\n"
+" -f\tthe maximum size of files written by the shell and its children\n"
+" -i\tthe maximum number of pending signals\n"
+" -l\tthe maximum size a process may lock into memory\n"
+" -m\tthe maximum resident set size\n"
+" -n\tthe maximum number of open file descriptors\n"
+" -p\tthe pipe buffer size\n"
+" -q\tthe maximum number of bytes in POSIX message queues\n"
+" -r\tthe maximum real-time scheduling priority\n"
+" -s\tthe maximum stack size\n"
+" -t\tthe maximum amount of cpu time in seconds\n"
+" -u\tthe maximum number of user processes\n"
+" -v\tthe size of virtual memory\n"
+" -x\tthe maximum number of file locks\n"
+" -T the maximum number of threads\n"
+" \n"
+" Not all options are available on all platforms.\n"
+" \n"
+" If LIMIT is given, it is the new value of the specified resource; the\n"
+" special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
+" current soft limit, the current hard limit, and no limit, respectively.\n"
+" Otherwise, the current value of the specified resource is printed. If\n"
+" no option is given, then -f is assumed.\n"
+" \n"
+" Values are in 1024-byte increments, except for -t, which is in seconds,\n"
+" -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
+" number of processes.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1462
+msgid ""
+"Display or set file mode mask.\n"
+" \n"
+" Sets the user file-creation mask to MODE. If MODE is omitted, prints\n"
+" the current value of the mask.\n"
+" \n"
+" If MODE begins with a digit, it is interpreted as an octal number;\n"
+" otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
+" \n"
+" Options:\n"
+" -p\tif MODE is omitted, output in a form that may be reused as input\n"
+" -S\tmakes the output symbolic; otherwise an octal number is output\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless MODE is invalid or an invalid option is given."
+msgstr ""
+
+#: builtins.c:1482
+msgid ""
+"Wait for job completion and return exit status.\n"
+" \n"
+" Waits for each process identified by an ID, which may be a process ID or a\n"
+" job specification, and reports its termination status. If ID is not\n"
+" given, waits for all currently active child processes, and the return\n"
+" status is zero. If ID is a a job specification, waits for all processes\n"
+" in that job's pipeline.\n"
+" \n"
+" If the -n option is supplied, waits for the next job to terminate and\n"
+" returns its exit status.\n"
+" \n"
+" Exit Status:\n"
+" Returns the status of the last ID; fails if ID is invalid or an invalid\n"
+" option is given."
+msgstr ""
+
+#: builtins.c:1503
+msgid ""
+"Wait for process completion and return exit status.\n"
+" \n"
+" Waits for each process specified by a PID and reports its termination status.\n"
+" If PID is not given, waits for all currently active child processes,\n"
+" and the return status is zero. PID must be a process ID.\n"
+" \n"
+" Exit Status:\n"
+" Returns the status of the last PID; fails if PID is invalid or an invalid\n"
+" option is given."
+msgstr ""
+
+#: builtins.c:1518
+msgid ""
+"Execute commands for each member in a list.\n"
+" \n"
+" The `for' loop executes a sequence of commands for each member in a\n"
+" list of items. If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
+" assumed. For each element in WORDS, NAME is set to that element, and\n"
+" the COMMANDS are executed.\n"
+" \n"
+" Exit Status:\n"
+" Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1532
+msgid ""
+"Arithmetic for loop.\n"
+" \n"
+" Equivalent to\n"
+" \t(( EXP1 ))\n"
+" \twhile (( EXP2 )); do\n"
+" \t\tCOMMANDS\n"
+" \t\t(( EXP3 ))\n"
+" \tdone\n"
+" EXP1, EXP2, and EXP3 are arithmetic expressions. If any expression is\n"
+" omitted, it behaves as if it evaluates to 1.\n"
+" \n"
+" Exit Status:\n"
+" Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1550
+msgid ""
+"Select words from a list and execute commands.\n"
+" \n"
+" The WORDS are expanded, generating a list of words. The\n"
+" set of expanded words is printed on the standard error, each\n"
+" preceded by a number. If `in WORDS' is not present, `in \"$@\"'\n"
+" is assumed. The PS3 prompt is then displayed and a line read\n"
+" from the standard input. If the line consists of the number\n"
+" corresponding to one of the displayed words, then NAME is set\n"
+" to that word. If the line is empty, WORDS and the prompt are\n"
+" redisplayed. If EOF is read, the command completes. Any other\n"
+" value read causes NAME to be set to null. The line read is saved\n"
+" in the variable REPLY. COMMANDS are executed after each selection\n"
+" until a break command is executed.\n"
+" \n"
+" Exit Status:\n"
+" Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1571
+msgid ""
+"Report time consumed by pipeline's execution.\n"
+" \n"
+" Execute PIPELINE and print a summary of the real time, user CPU time,\n"
+" and system CPU time spent executing PIPELINE when it terminates.\n"
+" \n"
+" Options:\n"
+" -p\tprint the timing summary in the portable Posix format\n"
+" \n"
+" The value of the TIMEFORMAT variable is used as the output format.\n"
+" \n"
+" Exit Status:\n"
+" The return status is the return status of PIPELINE."
+msgstr ""
+
+#: builtins.c:1588
+msgid ""
+"Execute commands based on pattern matching.\n"
+" \n"
+" Selectively execute COMMANDS based upon WORD matching PATTERN. The\n"
+" `|' is used to separate multiple patterns.\n"
+" \n"
+" Exit Status:\n"
+" Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1600
+msgid ""
+"Execute commands based on conditional.\n"
+" \n"
+" The `if COMMANDS' list is executed. If its exit status is zero, then the\n"
+" `then COMMANDS' list is executed. Otherwise, each `elif COMMANDS' list is\n"
+" executed in turn, and if its exit status is zero, the corresponding\n"
+" `then COMMANDS' list is executed and the if command completes. Otherwise,\n"
+" the `else COMMANDS' list is executed, if present. The exit status of the\n"
+" entire construct is the exit status of the last command executed, or zero\n"
+" if no condition tested true.\n"
+" \n"
+" Exit Status:\n"
+" Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1617
+msgid ""
+"Execute commands as long as a test succeeds.\n"
+" \n"
+" Expand and execute COMMANDS as long as the final command in the\n"
+" `while' COMMANDS has an exit status of zero.\n"
+" \n"
+" Exit Status:\n"
+" Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1629
+msgid ""
+"Execute commands as long as a test does not succeed.\n"
+" \n"
+" Expand and execute COMMANDS as long as the final command in the\n"
+" `until' COMMANDS has an exit status which is not zero.\n"
+" \n"
+" Exit Status:\n"
+" Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1641
+msgid ""
+"Create a coprocess named NAME.\n"
+" \n"
+" Execute COMMAND asynchronously, with the standard output and standard\n"
+" input of the command connected via a pipe to file descriptors assigned\n"
+" to indices 0 and 1 of an array variable NAME in the executing shell.\n"
+" The default NAME is \"COPROC\".\n"
+" \n"
+" Exit Status:\n"
+" Returns the exit status of COMMAND."
+msgstr ""
+
+#: builtins.c:1655
+msgid ""
+"Define shell function.\n"
+" \n"
+" Create a shell function named NAME. When invoked as a simple command,\n"
+" NAME runs COMMANDs in the calling shell's context. When NAME is invoked,\n"
+" the arguments are passed to the function as $1...$n, and the function's\n"
+" name is in $FUNCNAME.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless NAME is readonly."
+msgstr ""
+
+#: builtins.c:1669
+msgid ""
+"Group commands as a unit.\n"
+" \n"
+" Run a set of commands in a group. This is one way to redirect an\n"
+" entire set of commands.\n"
+" \n"
+" Exit Status:\n"
+" Returns the status of the last command executed."
+msgstr ""
+
+#: builtins.c:1681
+msgid ""
+"Resume job in foreground.\n"
+" \n"
+" Equivalent to the JOB_SPEC argument to the `fg' command. Resume a\n"
+" stopped or background job. JOB_SPEC can specify either a job name\n"
+" or a job number. Following JOB_SPEC with a `&' places the job in\n"
+" the background, as if the job specification had been supplied as an\n"
+" argument to `bg'.\n"
+" \n"
+" Exit Status:\n"
+" Returns the status of the resumed job."
+msgstr ""
+
+#: builtins.c:1696
+msgid ""
+"Evaluate arithmetic expression.\n"
+" \n"
+" The EXPRESSION is evaluated according to the rules for arithmetic\n"
+" evaluation. Equivalent to \"let EXPRESSION\".\n"
+" \n"
+" Exit Status:\n"
+" Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
+msgstr ""
+
+#: builtins.c:1708
+msgid ""
+"Execute conditional command.\n"
+" \n"
+" Returns a status of 0 or 1 depending on the evaluation of the conditional\n"
+" expression EXPRESSION. Expressions are composed of the same primaries used\n"
+" by the `test' builtin, and may be combined using the following operators:\n"
+" \n"
+" ( EXPRESSION )\tReturns the value of EXPRESSION\n"
+" ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
+" EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
+" EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
+" \n"
+" When the `==' and `!=' operators are used, the string to the right of\n"
+" the operator is used as a pattern and pattern matching is performed.\n"
+" When the `=~' operator is used, the string to the right of the operator\n"
+" is matched as a regular expression.\n"
+" \n"
+" The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
+" determine the expression's value.\n"
+" \n"
+" Exit Status:\n"
+" 0 or 1 depending on value of EXPRESSION."
+msgstr ""
+
+#: builtins.c:1734
+msgid ""
+"Common shell variable names and usage.\n"
+" \n"
+" BASH_VERSION\tVersion information for this Bash.\n"
+" CDPATH\tA colon-separated list of directories to search\n"
+" \t\tfor directories given as arguments to `cd'.\n"
+" GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
+" \t\tbe ignored by pathname expansion.\n"
+" HISTFILE\tThe name of the file where your command history is stored.\n"
+" HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
+" HISTSIZE\tThe maximum number of history lines that a running\n"
+" \t\tshell can access.\n"
+" HOME\tThe complete pathname to your login directory.\n"
+" HOSTNAME\tThe name of the current host.\n"
+" HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
+" IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
+" \t\tcharacter as the sole input. If set, then the value\n"
+" \t\tof it is the number of EOF characters that can be seen\n"
+" \t\tin a row on an empty line before the shell will exit\n"
+" \t\t(default 10). When unset, EOF signifies the end of input.\n"
+" MACHTYPE\tA string describing the current system Bash is running on.\n"
+" MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
+" MAILPATH\tA colon-separated list of filenames which Bash checks\n"
+" \t\tfor new mail.\n"
+" OSTYPE\tThe version of Unix this version of Bash is running on.\n"
+" PATH\tA colon-separated list of directories to search when\n"
+" \t\tlooking for commands.\n"
+" PROMPT_COMMAND\tA command to be executed before the printing of each\n"
+" \t\tprimary prompt.\n"
+" PS1\t\tThe primary prompt string.\n"
+" PS2\t\tThe secondary prompt string.\n"
+" PWD\t\tThe full pathname of the current directory.\n"
+" SHELLOPTS\tA colon-separated list of enabled shell options.\n"
+" TERM\tThe name of the current terminal type.\n"
+" TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
+" \t\t`time' reserved word.\n"
+" auto_resume\tNon-null means a command word appearing on a line by\n"
+" \t\titself is first looked for in the list of currently\n"
+" \t\tstopped jobs. If found there, that job is foregrounded.\n"
+" \t\tA value of `exact' means that the command word must\n"
+" \t\texactly match a command in the list of stopped jobs. A\n"
+" \t\tvalue of `substring' means that the command word must\n"
+" \t\tmatch a substring of the job. Any other value means that\n"
+" \t\tthe command must be a prefix of a stopped job.\n"
+" histchars\tCharacters controlling history expansion and quick\n"
+" \t\tsubstitution. The first character is the history\n"
+" \t\tsubstitution character, usually `!'. The second is\n"
+" \t\tthe `quick substitution' character, usually `^'. The\n"
+" \t\tthird is the `history comment' character, usually `#'.\n"
+" HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
+" \t\tcommands should be saved on the history list.\n"
+msgstr ""
+
+#: builtins.c:1791
+msgid ""
+"Add directories to stack.\n"
+" \n"
+" Adds a directory to the top of the directory stack, or rotates\n"
+" the stack, making the new top of the stack the current working\n"
+" directory. With no arguments, exchanges the top two directories.\n"
+" \n"
+" Options:\n"
+" -n\tSuppresses the normal change of directory when adding\n"
+" \tdirectories to the stack, so only the stack is manipulated.\n"
+" \n"
+" Arguments:\n"
+" +N\tRotates the stack so that the Nth directory (counting\n"
+" \tfrom the left of the list shown by `dirs', starting with\n"
+" \tzero) is at the top.\n"
+" \n"
+" -N\tRotates the stack so that the Nth directory (counting\n"
+" \tfrom the right of the list shown by `dirs', starting with\n"
+" \tzero) is at the top.\n"
+" \n"
+" dir\tAdds DIR to the directory stack at the top, making it the\n"
+" \tnew current working directory.\n"
+" \n"
+" The `dirs' builtin displays the directory stack.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid argument is supplied or the directory\n"
+" change fails."
+msgstr ""
+
+#: builtins.c:1825
+msgid ""
+"Remove directories from stack.\n"
+" \n"
+" Removes entries from the directory stack. With no arguments, removes\n"
+" the top directory from the stack, and changes to the new top directory.\n"
+" \n"
+" Options:\n"
+" -n\tSuppresses the normal change of directory when removing\n"
+" \tdirectories from the stack, so only the stack is manipulated.\n"
+" \n"
+" Arguments:\n"
+" +N\tRemoves the Nth entry counting from the left of the list\n"
+" \tshown by `dirs', starting with zero. For example: `popd +0'\n"
+" \tremoves the first directory, `popd +1' the second.\n"
+" \n"
+" -N\tRemoves the Nth entry counting from the right of the list\n"
+" \tshown by `dirs', starting with zero. For example: `popd -0'\n"
+" \tremoves the last directory, `popd -1' the next to last.\n"
+" \n"
+" The `dirs' builtin displays the directory stack.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid argument is supplied or the directory\n"
+" change fails."
+msgstr ""
+
+#: builtins.c:1855
+msgid ""
+"Display directory stack.\n"
+" \n"
+" Display the list of currently remembered directories. Directories\n"
+" find their way onto the list with the `pushd' command; you can get\n"
+" back up through the list with the `popd' command.\n"
+" \n"
+" Options:\n"
+" -c\tclear the directory stack by deleting all of the elements\n"
+" -l\tdo not print tilde-prefixed versions of directories relative\n"
+" \tto your home directory\n"
+" -p\tprint the directory stack with one entry per line\n"
+" -v\tprint the directory stack with one entry per line prefixed\n"
+" \twith its position in the stack\n"
+" \n"
+" Arguments:\n"
+" +N\tDisplays the Nth entry counting from the left of the list shown by\n"
+" \tdirs when invoked without options, starting with zero.\n"
+" \n"
+" -N\tDisplays the Nth entry counting from the right of the list shown by\n"
+" \tdirs when invoked without options, starting with zero.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1884
+msgid ""
+"Set and unset shell options.\n"
+" \n"
+" Change the setting of each shell option OPTNAME. Without any option\n"
+" arguments, list all shell options with an indication of whether or not each\n"
+" is set.\n"
+" \n"
+" Options:\n"
+" -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
+" -p\tprint each shell option with an indication of its status\n"
+" -q\tsuppress output\n"
+" -s\tenable (set) each OPTNAME\n"
+" -u\tdisable (unset) each OPTNAME\n"
+" \n"
+" Exit Status:\n"
+" Returns success if OPTNAME is enabled; fails if an invalid option is\n"
+" given or OPTNAME is disabled."
+msgstr ""
+
+#: builtins.c:1905
+msgid ""
+"Formats and prints ARGUMENTS under control of the FORMAT.\n"
+" \n"
+" Options:\n"
+" -v var\tassign the output to shell variable VAR rather than\n"
+" \t\tdisplay it on the standard output\n"
+" \n"
+" FORMAT is a character string which contains three types of objects: plain\n"
+" characters, which are simply copied to standard output; character escape\n"
+" sequences, which are converted and copied to the standard output; and\n"
+" format specifications, each of which causes printing of the next successive\n"
+" argument.\n"
+" \n"
+" In addition to the standard format specifications described in printf(1),\n"
+" printf interprets:\n"
+" \n"
+" %b\texpand backslash escape sequences in the corresponding argument\n"
+" %q\tquote the argument in a way that can be reused as shell input\n"
+" %(fmt)T output the date-time string resulting from using FMT as a format\n"
+" string for strftime(3)\n"
+" \n"
+" The format is re-used as necessary to consume all of the arguments. If\n"
+" there are fewer arguments than the format requires, extra format\n"
+" specifications behave as if a zero value or null string, as appropriate,\n"
+" had been supplied.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid option is given or a write or assignment\n"
+" error occurs."
+msgstr ""
+
+#: builtins.c:1939
+msgid ""
+"Specify how arguments are to be completed by Readline.\n"
+" \n"
+" For each NAME, specify how arguments are to be completed. If no options\n"
+" are supplied, existing completion specifications are printed in a way that\n"
+" allows them to be reused as input.\n"
+" \n"
+" Options:\n"
+" -p\tprint existing completion specifications in a reusable format\n"
+" -r\tremove a completion specification for each NAME, or, if no\n"
+" \tNAMEs are supplied, all completion specifications\n"
+" -D\tapply the completions and actions as the default for commands\n"
+" \twithout any specific completion defined\n"
+" -E\tapply the completions and actions to \"empty\" commands --\n"
+" \tcompletion attempted on a blank line\n"
+" \n"
+" When completion is attempted, the actions are applied in the order the\n"
+" uppercase-letter options are listed above. The -D option takes\n"
+" precedence over -E.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1967
+msgid ""
+"Display possible completions depending on the options.\n"
+" \n"
+" Intended to be used from within a shell function generating possible\n"
+" completions. If the optional WORD argument is supplied, matches against\n"
+" WORD are generated.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid option is supplied or an error occurs."
+msgstr ""
+
+#: builtins.c:1982
+msgid ""
+"Modify or display completion options.\n"
+" \n"
+" Modify the completion options for each NAME, or, if no NAMEs are supplied,\n"
+" the completion currently being executed. If no OPTIONs are given, print\n"
+" the completion options for each NAME or the current completion specification.\n"
+" \n"
+" Options:\n"
+" \t-o option\tSet completion option OPTION for each NAME\n"
+" \t-D\t\tChange options for the \"default\" command completion\n"
+" \t-E\t\tChange options for the \"empty\" command completion\n"
+" \n"
+" Using `+o' instead of `-o' turns off the specified option.\n"
+" \n"
+" Arguments:\n"
+" \n"
+" Each NAME refers to a command for which a completion specification must\n"
+" have previously been defined using the `complete' builtin. If no NAMEs\n"
+" are supplied, compopt must be called by a function currently generating\n"
+" completions, and the options for that currently-executing completion\n"
+" generator are modified.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid option is supplied or NAME does not\n"
+" have a completion specification defined."
+msgstr ""
+
+#: builtins.c:2012
+msgid ""
+"Read lines from the standard input into an indexed array variable.\n"
+" \n"
+" Read lines from the standard input into the indexed array variable ARRAY, or\n"
+" from file descriptor FD if the -u option is supplied. The variable MAPFILE\n"
+" is the default ARRAY.\n"
+" \n"
+" Options:\n"
+" -n count\tCopy at most COUNT lines. If COUNT is 0, all lines are copied.\n"
+" -O origin\tBegin assigning to ARRAY at index ORIGIN. The default index is 0.\n"
+" -s count \tDiscard the first COUNT lines read.\n"
+" -t\t\tRemove a trailing newline from each line read.\n"
+" -u fd\t\tRead lines from file descriptor FD instead of the standard input.\n"
+" -C callback\tEvaluate CALLBACK each time QUANTUM lines are read.\n"
+" -c quantum\tSpecify the number of lines read between each call to CALLBACK.\n"
+" \n"
+" Arguments:\n"
+" ARRAY\t\tArray variable name to use for file data.\n"
+" \n"
+" If -C is supplied without -c, the default quantum is 5000. When\n"
+" CALLBACK is evaluated, it is supplied the index of the next array\n"
+" element to be assigned and the line to be assigned to that element\n"
+" as additional arguments.\n"
+" \n"
+" If not supplied with an explicit origin, mapfile will clear ARRAY before\n"
+" assigning to it.\n"
+" \n"
+" Exit Status:\n"
+" Returns success unless an invalid option is given or ARRAY is readonly or\n"
+" not an indexed array."
+msgstr ""
+
+#: builtins.c:2046
+msgid ""
+"Read lines from a file into an array variable.\n"
+" \n"
+" A synonym for `mapfile'."
+msgstr ""
+"Ανάγνωση γραμμών από αρχείο σε μεταβλητή τύπου πίνακα.\n"
+" \n"
+" Συνώνημο του «mapfile»."
cprintf ("{%s}", redir_word->word);
else if (redirector != 1)
cprintf ("%d", redirector);
- cprintf (">|%s", redirectee->word);
+ cprintf (">| %s", redirectee->word);
break;
case r_appending_to:
break;
case r_err_and_out:
- cprintf ("&>%s", redirectee->word);
+ cprintf ("&> %s", redirectee->word);
break;
case r_append_err_and_out:
- cprintf ("&>>%s", redirectee->word);
+ cprintf ("&>> %s", redirectee->word);
break;
}
}
;;
# Darwin/MacOS X
-darwin[89]*|darwin1[012]*)
+darwin[89]*|darwin1[0123]*)
SHOBJ_STATUS=supported
SHLIB_STATUS=supported
SHLIB_LIBSUFF='dylib'
case "${host_os}" in
- darwin[789]*|darwin1[012]*) SHOBJ_LDFLAGS=''
+ darwin[789]*|darwin1[0123]*) SHOBJ_LDFLAGS=''
SHLIB_XLDFLAGS='-dynamiclib -arch_only `/usr/bin/arch` -install_name $(libdir)/$@ -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR) -v'
;;
*) SHOBJ_LDFLAGS='-dynamic'
--- /dev/null
+:; ./shx
+
+sh:
+<&$fd ok
+nlbq Mon Aug 3 02:45:00 EDT 1992
+bang geoff
+quote 712824302
+setbq defmsgid=<1992Aug3.024502.6176@host>
+bgwait sleep done... wait 6187
+
+
+bash:
+<&$fd ok
+nlbq Mon Aug 3 02:45:09 EDT 1992
+bang geoff
+quote 712824311
+setbq defmsgid=<1992Aug3.024512.6212@host>
+bgwait sleep done... wait 6223
+
+
+ash:
+<&$fd shx1: 4: Syntax error: Bad fd number
+nlbq Mon Aug 3 02:45:19 EDT 1992
+bang geoff
+quote getdate: `"now"' not a valid date
+
+setbq defmsgid=<1992Aug3.` echo 024521
+bgwait sleep done... wait 6241
+
+
+ksh:
+<&$fd ok
+nlbq ./shx: 6248 Memory fault - core dumped
+bang geoff
+quote getdate: `"now"' not a valid date
+
+setbq defmsgid=<1992Aug3.024530.6257@host>
+bgwait no such job: 6265
+wait 6265
+sleep done...
+
+zsh:
+<&$fd ok
+nlbq Mon Aug 3 02:45:36 EDT 1992
+bang shx3: event not found: /s/ [4]
+quote 712824337
+setbq defmsgid=<..6290@host>
+bgwait shx7: unmatched " [9]
+sleep done...
+:;
--- /dev/null
+#! /bin/sh
+for cmd in sh bash ash ksh zsh
+do
+ echo
+ echo $cmd:
+ for demo in shx?
+ do
+ $cmd $demo
+ done
+done
projects / thirdparty / bash.git / commitdiff
