u32 fwpf_ctrl_base;
};
+/* Enum for firmware notification modes,
+ * more modes (e.g., portup, link_report) will be added in future
+ **/
+enum {
+ mucse_fw_powerup,
+};
+
struct mucse_hw {
void __iomem *hw_addr;
+ struct pci_dev *pdev;
struct mucse_mbx_info mbx;
+ int port;
u8 pfvfnum;
};
+struct mucse_stats {
+ u64 tx_dropped;
+};
+
struct mucse {
struct net_device *netdev;
struct pci_dev *pdev;
struct mucse_hw hw;
+ struct mucse_stats stats;
};
+int rnpgbe_get_permanent_mac(struct mucse_hw *hw, u8 *perm_addr);
+int rnpgbe_reset_hw(struct mucse_hw *hw);
+int rnpgbe_send_notify(struct mucse_hw *hw,
+ bool enable,
+ int mode);
int rnpgbe_init_hw(struct mucse_hw *hw, int board_type);
/* Device IDs */
#define RNPGBE_DEVICE_ID_N500_DUAL_PORT 0x8318
#define RNPGBE_DEVICE_ID_N210 0x8208
#define RNPGBE_DEVICE_ID_N210L 0x820a
+
+#define mucse_hw_wr32(hw, reg, val) \
+ writel((val), (hw)->hw_addr + (reg))
#endif /* _RNPGBE_H */
// SPDX-License-Identifier: GPL-2.0
/* Copyright(c) 2020 - 2025 Mucse Corporation. */
+#include <linux/pci.h>
#include <linux/errno.h>
+#include <linux/etherdevice.h>
#include "rnpgbe.h"
#include "rnpgbe_hw.h"
#include "rnpgbe_mbx.h"
+#include "rnpgbe_mbx_fw.h"
+
+/**
+ * rnpgbe_get_permanent_mac - Get permanent mac
+ * @hw: hw information structure
+ * @perm_addr: pointer to store perm_addr
+ *
+ * rnpgbe_get_permanent_mac tries to get mac from hw
+ *
+ * Return: 0 on success, negative errno on failure
+ **/
+int rnpgbe_get_permanent_mac(struct mucse_hw *hw, u8 *perm_addr)
+{
+ struct device *dev = &hw->pdev->dev;
+ int err;
+
+ err = mucse_mbx_get_macaddr(hw, hw->pfvfnum, perm_addr, hw->port);
+ if (err) {
+ dev_err(dev, "Failed to get MAC from FW %d\n", err);
+ return err;
+ }
+
+ if (!is_valid_ether_addr(perm_addr)) {
+ dev_err(dev, "Failed to get valid MAC from FW\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * rnpgbe_reset_hw - Do a hardware reset
+ * @hw: hw information structure
+ *
+ * rnpgbe_reset_hw calls fw to do a hardware
+ * reset, and cleans some regs to default.
+ *
+ * Return: 0 on success, negative errno on failure
+ **/
+int rnpgbe_reset_hw(struct mucse_hw *hw)
+{
+ mucse_hw_wr32(hw, RNPGBE_DMA_AXI_EN, 0);
+ return mucse_mbx_reset_hw(hw);
+}
+
+/**
+ * rnpgbe_send_notify - Echo fw status
+ * @hw: hw information structure
+ * @enable: true or false status
+ * @mode: status mode
+ *
+ * Return: 0 on success, negative errno on failure
+ **/
+int rnpgbe_send_notify(struct mucse_hw *hw,
+ bool enable,
+ int mode)
+{
+ int err;
+ /* Keep switch struct to support more modes in the future */
+ switch (mode) {
+ case mucse_fw_powerup:
+ err = mucse_mbx_powerup(hw, enable);
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ return err;
+}
/**
* rnpgbe_init_n500 - Setup n500 hw info
{
struct mucse_mbx_info *mbx = &hw->mbx;
+ hw->port = 0;
+
mbx->pf2fw_mbx_ctrl = MUCSE_GBE_PFFW_MBX_CTRL_OFFSET;
mbx->fwpf_mbx_mask = MUCSE_GBE_FWPF_MBX_MASK_OFFSET;
#include "rnpgbe.h"
#include "rnpgbe_hw.h"
+#include "rnpgbe_mbx_fw.h"
static const char rnpgbe_driver_name[] = "rnpgbe";
{0, },
};
+/**
+ * rnpgbe_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP).
+ *
+ * Return: 0
+ **/
+static int rnpgbe_open(struct net_device *netdev)
+{
+ return 0;
+}
+
+/**
+ * rnpgbe_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS.
+ *
+ * Return: 0, this is not allowed to fail
+ **/
+static int rnpgbe_close(struct net_device *netdev)
+{
+ return 0;
+}
+
+/**
+ * rnpgbe_xmit_frame - Send a skb to driver
+ * @skb: skb structure to be sent
+ * @netdev: network interface device structure
+ *
+ * Return: NETDEV_TX_OK
+ **/
+static netdev_tx_t rnpgbe_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct mucse *mucse = netdev_priv(netdev);
+
+ dev_kfree_skb_any(skb);
+ mucse->stats.tx_dropped++;
+
+ return NETDEV_TX_OK;
+}
+
+static const struct net_device_ops rnpgbe_netdev_ops = {
+ .ndo_open = rnpgbe_open,
+ .ndo_stop = rnpgbe_close,
+ .ndo_start_xmit = rnpgbe_xmit_frame,
+};
+
/**
* rnpgbe_add_adapter - Add netdev for this pci_dev
* @pdev: PCI device information structure
int board_type)
{
struct net_device *netdev;
+ u8 perm_addr[ETH_ALEN];
void __iomem *hw_addr;
struct mucse *mucse;
struct mucse_hw *hw;
- int err;
+ int err, err_notify;
netdev = alloc_etherdev_mq(sizeof(struct mucse), RNPGBE_MAX_QUEUES);
if (!netdev)
}
hw->hw_addr = hw_addr;
+ hw->pdev = pdev;
+
err = rnpgbe_init_hw(hw, board_type);
if (err) {
dev_err(&pdev->dev, "Init hw err %d\n", err);
goto err_free_net;
}
+ /* Step 1: Send power-up notification to firmware (no response expected)
+ * This informs firmware to initialize hardware power state, but
+ * firmware only acknowledges receipt without returning data. Must be
+ * done before synchronization as firmware may be in low-power idle
+ * state initially.
+ */
+ err_notify = rnpgbe_send_notify(hw, true, mucse_fw_powerup);
+ if (err_notify) {
+ dev_warn(&pdev->dev, "Send powerup to hw failed %d\n",
+ err_notify);
+ dev_warn(&pdev->dev, "Maybe low performance\n");
+ }
+ /* Step 2: Synchronize mailbox communication with firmware (requires
+ * response) After power-up, confirm firmware is ready to process
+ * requests with responses. This ensures subsequent request/response
+ * interactions work reliably.
+ */
+ err = mucse_mbx_sync_fw(hw);
+ if (err) {
+ dev_err(&pdev->dev, "Sync fw failed! %d\n", err);
+ goto err_powerdown;
+ }
- return 0;
+ netdev->netdev_ops = &rnpgbe_netdev_ops;
+ err = rnpgbe_reset_hw(hw);
+ if (err) {
+ dev_err(&pdev->dev, "Hw reset failed %d\n", err);
+ goto err_powerdown;
+ }
+
+ err = rnpgbe_get_permanent_mac(hw, perm_addr);
+ if (!err) {
+ eth_hw_addr_set(netdev, perm_addr);
+ } else if (err == -EINVAL) {
+ dev_warn(&pdev->dev, "Using random MAC\n");
+ eth_hw_addr_random(netdev);
+ } else if (err) {
+ dev_err(&pdev->dev, "get perm_addr failed %d\n", err);
+ goto err_powerdown;
+ }
+
+ err = register_netdev(netdev);
+ if (err)
+ goto err_powerdown;
+ return 0;
+err_powerdown:
+ /* notify powerdown only powerup ok */
+ if (!err_notify) {
+ err_notify = rnpgbe_send_notify(hw, false, mucse_fw_powerup);
+ if (err_notify)
+ dev_warn(&pdev->dev, "Send powerdown to hw failed %d\n",
+ err_notify);
+ }
err_free_net:
free_netdev(netdev);
return err;
static void rnpgbe_rm_adapter(struct pci_dev *pdev)
{
struct mucse *mucse = pci_get_drvdata(pdev);
+ struct mucse_hw *hw = &mucse->hw;
struct net_device *netdev;
+ int err;
if (!mucse)
return;
netdev = mucse->netdev;
+ unregister_netdev(netdev);
+ err = rnpgbe_send_notify(hw, false, mucse_fw_powerup);
+ if (err)
+ dev_warn(&pdev->dev, "Send powerdown to hw failed %d\n", err);
free_netdev(netdev);
}
rtnl_lock();
netif_device_detach(netdev);
+ if (netif_running(netdev))
+ rnpgbe_close(netdev);
rtnl_unlock();
pci_disable_device(pdev);
}
projects / thirdparty / kernel / linux.git / commitdiff
