]> git.ipfire.org Git - thirdparty/linux.git/commitdiff
i2c: i801: Add lis3lv02d for Dell XPS 15 7590
authorPaul Menzel <pmenzel@molgen.mpg.de>
Wed, 20 Dec 2023 16:10:02 +0000 (17:10 +0100)
committerWolfram Sang <wsa@kernel.org>
Thu, 18 Jan 2024 20:10:43 +0000 (21:10 +0100)
On the Dell XPS 15 7590/0VYV0G, BIOS 1.24.0 09/11/2023, Linux prints the
warning below.

    i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration

Following the same suggestions by Wolfram Sang as for the Dell Precision
3540 [1], the accelerometer can be successfully found on I2C bus 2 at
address 0x29.

    $ echo lis3lv02d 0x29 | sudo tee /sys/bus/i2c/devices/i2c-2/new_device
    lis3lv02d 0x29
    $ dmesg | tail -5
    [  549.522876] lis3lv02d_i2c 2-0029: supply Vdd not found, using dummy regulator
    [  549.522904] lis3lv02d_i2c 2-0029: supply Vdd_IO not found, using dummy regulator
    [  549.542486] lis3lv02d: 8 bits 3DC sensor found
    [  549.630022] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input35
    [  549.630586] i2c i2c-2: new_device: Instantiated device lis3lv02d at 0x29

So, the device has that accelerometer. Add the I2C address to the
mapping list, and test it successfully on the device.

[1]: https://lore.kernel.org/linux-i2c/97708c11-ac85-fb62-2c8e-d37739ca826f@molgen.mpg.de/

Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
drivers/i2c/busses/i2c-i801.c

index cb9660f841171dc2fff72b637c9c225563cb9082..3932e8d96a17173fa3b4f7ad90ebcbb786e99370 100644 (file)
@@ -1233,6 +1233,7 @@ static const struct {
        { "Precision 3540",     0x29 },
        { "Vostro V131",        0x1d },
        { "Vostro 5568",        0x29 },
+       { "XPS 15 7590",        0x29 },
 };
 
 static void register_dell_lis3lv02d_i2c_device(struct i801_priv *priv)