" Vim support file to detect file types
"
" Maintainer: The Vim Project <https://github.com/vim/vim>
-" Last Change: 2025 Oct 05
+" Last Change: 2025 Oct 09
" Former Maintainer: Bram Moolenaar <Bram@vim.org>
+" If the filetype can be detected from extension or file name(the final path component),
+" please update `ft_from_name` and `ft_from_ext` in `runtime/autoload/dist/ft.vim`.
+" Otherwise add a new autocmd in this file.
+
" Listen very carefully, I will say this only once
if exists("did_load_filetypes")
finish
\| setf help
\| endif
+" Detect by name
+au BufNewFile,BufRead * call dist#ft#DetectFromName()
+
" Abaqus or Trasys
au BufNewFile,BufRead *.inp call dist#ft#Check_inp()
-" 8th (Firth-derivative)
-au BufNewFile,BufRead *.8th setf 8th
-
-" A-A-P recipe
-au BufNewFile,BufRead *.aap setf aap
-
" A2ps printing utility
au BufNewFile,BufRead */etc/a2ps.cfg,*/etc/a2ps/*.cfg,a2psrc,.a2psrc setf a2ps
-" ABAB/4
-au BufNewFile,BufRead *.abap setf abap
-
-" ABC music notation
-au BufNewFile,BufRead *.abc setf abc
-
-" ABEL
-au BufNewFile,BufRead *.abl setf abel
-
-" ABNF
-au BufNewFile,BufRead *.abnf setf abnf
-
-" AceDB
-au BufNewFile,BufRead *.wrm setf acedb
-
" Ada (83, 9X, 95)
-au BufNewFile,BufRead *.adb,*.ads,*.ada setf ada
if has("vms")
au BufNewFile,BufRead *.gpr,*.ada_m,*.adc setf ada
else
au BufNewFile,BufRead *.gpr setf ada
endif
-" AHDL
-au BufNewFile,BufRead *.tdf setf ahdl
-
-" AIDL
-au BufNewFile,BufRead *.aidl setf aidl
-
-" AMPL
-au BufNewFile,BufRead *.run setf ampl
-
-" Ant
-au BufNewFile,BufRead build.xml setf ant
-
-" ANTLR / PCCTS
-"au BufNewFile,BufRead *.g setf antlr
-au BufNewFile,BufRead *.g setf pccts
-
-" ANTLR 4
-au BufNewFile,BufRead *.g4 setf antlr4
-
-" Arduino
-au BufNewFile,BufRead *.ino,*.pde setf arduino
-
-" Ash of busybox
-au BufNewFile,BufRead .ash_history setf sh
-
-" Asymptote
-au BufNewFile,BufRead *.asy setf asy
-
" Apache config file
au BufNewFile,BufRead .htaccess,*/etc/httpd/*.conf setf apache
au BufNewFile,BufRead */etc/apache2/sites-*/*.com setf apache
-" XA65 MOS6510 cross assembler
-au BufNewFile,BufRead *.a65 setf a65
-
-" Applescript
-au BufNewFile,BufRead *.scpt setf applescript
-
-" Automake (must be before the *.am pattern)
-au BufNewFile,BufRead [mM]akefile.am,GNUmakefile.am setf automake
-
-" Applix ELF
-au BufNewFile,BufRead *.am setf elf
-
" ALSA configuration
au BufNewFile,BufRead .asoundrc,*/usr/share/alsa/alsa.conf,*/etc/asound.conf setf alsaconf
-" Arc Macro Language
-au BufNewFile,BufRead *.aml setf aml
-
" APT config file
-au BufNewFile,BufRead apt.conf setf aptconf
au BufNewFile,BufRead */.aptitude/config setf aptconf
" more generic pattern far down
" Arch Inventory file
au BufNewFile,BufRead .arch-inventory,=tagging-method setf arch
-" ART*Enterprise (formerly ART-IM)
-au BufNewFile,BufRead *.art setf art
-
-" AsciiDoc
-au BufNewFile,BufRead *.asciidoc,*.adoc setf asciidoc
-
-" ASN.1
-au BufNewFile,BufRead *.asn,*.asn1 setf asn
-
" Active Server Pages (with Visual Basic Script)
au BufNewFile,BufRead *.asa
\ if exists("g:filetype_asa") |
" *.[sS], *.[aA] usually Assembly - GNU
au BufNewFile,BufRead *.asm,*.[sS],*.[aA],*.mac,*.lst call dist#ft#FTasm()
-" Assembly - Netwide
-au BufNewFile,BufRead *.nasm setf nasm
-
-" Assembly - Microsoft
-au BufNewFile,BufRead *.masm setf masm
-
-" Assembly - Macro (VAX)
-au BufNewFile,BufRead *.mar setf vmasm
-
-" Astro
-au BufNewFile,BufRead *.astro setf astro
-
-" Atlas
-au BufNewFile,BufRead *.atl,*.as setf atlas
-
-" Atom is based on XML
-au BufNewFile,BufRead *.atom setf xml
-
-" Authzed
-au BufNewFile,BufRead *.zed setf authzed
-
-" Autoit v3
-au BufNewFile,BufRead *.au3 setf autoit
-
-" Autohotkey
-au BufNewFile,BufRead *.ahk setf autohotkey
-
-" Autotest .at files are actually Autoconf M4
-au BufNewFile,BufRead *.at setf config
-
-" Avenue
-au BufNewFile,BufRead *.ave setf ave
-
-" Awk
-au BufNewFile,BufRead *.awk,*.gawk setf awk
-
-" B
-au BufNewFile,BufRead *.mch,*.ref,*.imp setf b
-
" BASIC or Visual Basic
au BufNewFile,BufRead *.bas call dist#ft#FTbas()
au BufNewFile,BufRead *.bi,*.bm call dist#ft#FTbas()
-" Bass
-au BufNewFile,BufRead *.bass setf bass
-
-" IBasic file (similar to QBasic)
-au BufNewFile,BufRead *.iba,*.ibi setf ibasic
-
-" FreeBasic file (similar to QBasic)
-au BufNewFile,BufRead *.fb setf freebasic
-
" Batch file for MSDOS. See dist#ft#FTsys for *.sys
-au BufNewFile,BufRead *.bat setf dosbatch
" *.cmd is close to a Batch file, but on OS/2 Rexx files and TI linker command files also use *.cmd.
" lnk: `/* comment */`, `// comment`, and `--linker-option=value`
" rexx: `/* comment */`, `-- comment`
" Batch file for 4DOS
au BufNewFile,BufRead *.btm call dist#ft#FTbtm()
-" BC calculator
-au BufNewFile,BufRead *.bc setf bc
-
-" BDF font
-au BufNewFile,BufRead *.bdf setf bdf
-
-" Beancount
-au BufNewFile,BufRead *.beancount setf beancount
-
-" BibTeX bibliography database file
-au BufNewFile,BufRead *.bib setf bib
-
-" BibTeX Bibliography Style
-au BufNewFile,BufRead *.bst setf bst
-
-" Bicep
-au BufNewFile,BufRead *.bicep,*.bicepparam setf bicep
-
" BIND configuration
" sudoedit uses namedXXXX.conf
au BufNewFile,BufRead named*.conf,rndc*.conf,rndc*.key setf named
" BIND zone
-au BufNewFile,BufRead named.root setf bindzone
-au BufNewFile,BufRead *.zone setf bindzone
au BufNewFile,BufRead *.db call dist#ft#BindzoneCheck('')
" Blade
au BufNewFile,BufRead *.blade.php setf blade
-" Blank
-au BufNewFile,BufRead *.bl setf blank
-
" Bitbake
au BufNewFile,BufRead *.bb,*.bbappend,*.bbclass,*/build/conf/*.conf,*/meta{-*,}/conf/*.conf,*/project-spec/configs/*.conf setf bitbake
" Blkid cache file
au BufNewFile,BufRead */etc/blkid.tab,*/etc/blkid.tab.old setf xml
-" Brighterscript
-au BufNewFile,BufRead *.bs setf brighterscript
-
-" Brightscript
-au BufNewFile,BufRead *.brs setf brightscript
-
-" BSDL
-au BufNewFile,BufRead *.bsd,*.bsdl setf bsdl
-
" Bazel (https://bazel.build) and Buck2 (https://buck2.build/)
-autocmd BufRead,BufNewFile *.bzl,*.bxl,*.bazel,WORKSPACE,WORKSPACE.bzlmod setf bzl
+au BufNewFile,BufRead *.bzl,*.bxl,*.bazel,WORKSPACE,WORKSPACE.bzlmod setf bzl
if has("fname_case")
" There is another check for BUILD and BUCK further below.
- autocmd BufRead,BufNewFile *.BUILD,BUILD,BUCK setf bzl
+ au BufNewFile,BufRead *.BUILD,BUILD,BUCK setf bzl
endif
-" Busted (Lua unit testing framework - configuration files)
-au BufNewFile,BufRead .busted setf lua
-
-" Bun history
-au BufNewFile,BufRead .bun_repl_history setf javascript
-
" Bundle config
au BufNewFile,BufRead */.bundle/config setf yaml
au BufNewFile,BufRead *.c call dist#ft#FTlpc()
au BufNewFile,BufRead *.lpc,*.ulpc setf lpc
-" C3
-au BufNewFile,BufRead *.c3,*.c3i,*.c3t setf c3
-
-" Cairo
-au BufNewFile,BufRead *.cairo setf cairo
-
-" Calendar
-au BufNewFile,BufRead calendar setf calendar
-
-" Cap'n Proto
-au BufNewFile,BufRead *.capnp setf capnp
-
-" Cgdb config file
-au BufNewFile,BufRead cgdbrc setf cgdbrc
-
" m17n database files. */m17n/* matches installed files, */.m17n.d/* matches
" per-user config files, */m17n-db/* matches the git repo. (must be before
" *.cs)
au BufNewFile,BufRead */{m17n,.m17n.d,m17n-db}/*.{ali,cs,dir,flt,fst,lnm,mic,mim,tbl} setf m17ndb
-" C#
-au BufNewFile,BufRead *.cs,*.csx,*.cake setf cs
-
-" CSDL
-au BufNewFile,BufRead *.csdl setf csdl
-
-" Ctags
-au BufNewFile,BufRead *.ctags setf conf
-
-" Cabal
-au BufNewFile,BufRead *.cabal setf cabal
-
" Cdrdao TOC or LaTeX \tableofcontents files
au BufNewFile,BufRead *.toc
\ if getline(1) =~# '\\contentsline' |setf tex|else|setf cdrtoc|endif
" Cdrdao config
au BufNewFile,BufRead */etc/cdrdao.conf,*/etc/defaults/cdrdao,*/etc/default/cdrdao,.cdrdao setf cdrdaoconf
-" Cedar
-au BufNewFile,BufRead *.cedar setf cedar
-
-" Cfengine
-au BufNewFile,BufRead cfengine.conf setf cfengine
-
-" ChaiScript
-au BufRead,BufNewFile *.chai setf chaiscript
-
-" Chatito
-au BufNewFile,BufRead *.chatito setf chatito
-
-" Chktex
-au BufRead,BufNewFile .chktexrc setf conf
-
-" Chuck
-au BufNewFile,BufRead *.ck setf chuck
-
-" Comshare Dimension Definition Language
-au BufNewFile,BufRead *.cdl setf cdl
-
-" Codeowners
-au BufNewFile,BufRead CODEOWNERS setf codeowners
-
-" Conary Recipe
-au BufNewFile,BufRead *.recipe setf conaryrecipe
-
" Containers config files
au BufNewFile,BufRead */containers/containers.conf{,.d/*.conf} setf toml
au BufNewFile,BufRead */containers/containers.conf.modules/*.conf setf toml
au BufNewFile,BufRead */containers/registries.conf{,.d/*.conf} setf toml
au BufNewFile,BufRead */containers/storage.conf setf toml
-" Corn config file
-au BufNewFile,BufRead *.corn setf corn
-
-" ChainPack Object Notation (CPON)
-au BufNewFile,BufRead *.cpon setf cpon
-
-" Controllable Regex Mutilator
-au BufNewFile,BufRead *.crm setf crm
-
-" Cyn++
-au BufNewFile,BufRead *.cyn setf cynpp
-
" Cynlib
" .cc and .cpp files can be C++ or Cynlib.
au BufNewFile,BufRead *.cc
au BufNewFile,BufRead *.cpp
\ if exists("cynlib_syntax_for_cpp")|setf cynlib|else|setf cpp|endif
-" Cypher query language
-au BufNewFile,BufRead *.cypher setf cypher
-
" C++
-au BufNewFile,BufRead *.cxx,*.c++,*.hh,*.hxx,*.hpp,*.ipp,*.moc,*.tcc,*.inl setf cpp
if has("fname_case")
au BufNewFile,BufRead *.C,*.H if !&fileignorecase | setf cpp | endif
endif
-" MS files (ixx: C++ module interface file, Microsoft Project file)
-au BufNewFile,BufRead *.ixx,*.mpp setf cpp
-
-" C++ 20 modules (clang)
-" https://clang.llvm.org/docs/StandardCPlusPlusModules.html#file-name-requirement
-au BufNewFile,BufRead *.cppm,*.ccm,*.cxxm,*.c++m setf cpp
-
" .h files can be C, C++, Ch, Objective-C, or Objective-C++.
" Set g_filetype_h to set a different filetype
au BufNewFile,BufRead *.h call dist#ft#FTheader()
-" Ch (CHscript)
-au BufNewFile,BufRead *.chf setf ch
-
-" TLH files are C++ headers generated by Visual C++'s #import from typelibs
-au BufNewFile,BufRead *.tlh setf cpp
-
-" Cascading Style Sheets
-au BufNewFile,BufRead *.css setf css
-
-" Century Term Command Scripts (*.cmd too)
-au BufNewFile,BufRead *.con setf cterm
-
" Changelog
au BufNewFile,BufRead changelog.Debian,changelog.dch,NEWS.Debian,NEWS.dch,*/debian/changelog
\ setf debchangelog
" Changes for WEB and CWEB or CHILL
au BufNewFile,BufRead *.ch call dist#ft#FTchange()
-" ChordPro
-au BufNewFile,BufRead *.chopro,*.crd,*.cho,*.crdpro,*.chordpro setf chordpro
-
-" Clangd
-au BufNewFile,BufRead .clangd setf yaml
-
" Clang-format
au BufNewFile,BufRead .clang-format setf yaml
" Clang-tidy
au BufNewFile,BufRead .clang-tidy setf yaml
-" Conda configuration file
-au BufNewFile,BufRead .condarc,condarc setf yaml
-
" Matplotlib
au BufNewFile,BufRead *.mplstyle,matplotlibrc setf yaml
-" Clean
-au BufNewFile,BufRead *.dcl,*.icl setf clean
-
-" Clever
-au BufNewFile,BufRead *.eni setf cl
-
" Clever or dtd
au BufNewFile,BufRead *.ent call dist#ft#FTent()
-" Cling
-au BufNewFile,BufRead .cling_history setf cpp
-
" Clipper, FoxPro, ABB RAPID or eviews
au BufNewFile,BufRead *.prg call dist#ft#FTprg()
if has("fname_case")
au BufNewFile,BufRead *.Prg,*.PRG call dist#ft#FTprg()
endif
-" Clojure
-au BufNewFile,BufRead *.clj,*.cljs,*.cljx,*.cljc setf clojure
-
" Cmake
au BufNewFile,BufRead CMakeLists.txt,*.cmake,*.cmake.in setf cmake
-" CmakeCache
-autocmd BufRead,BufNewFile CMakeCache.txt setf cmakecache
-
" Cmusrc
au BufNewFile,BufRead */.cmus/{autosave,rc,command-history,*.theme} setf cmusrc
au BufNewFile,BufRead */cmus/{rc,*.theme} setf cmusrc
" Cobol
-au BufNewFile,BufRead *.cbl,*.cob setf cobol
" cobol or zope form controller python script? (heuristic)
au BufNewFile,BufRead *.cpy
\ if getline(1) =~ '^##' |
\ setf cobol |
\ endif
-" Coco/R
-au BufNewFile,BufRead *.atg setf coco
-
-" Cold Fusion
-au BufNewFile,BufRead *.cfm,*.cfi,*.cfc setf cf
-
-" Configure scripts
-au BufNewFile,BufRead configure.in,configure.ac setf config
-
-" Cooklang
-au BufNewFile,BufRead *.cook setf cook
-
-" Clinical Quality Language (CQL)
-" .cql is also mentioned as the 'XDCC Catcher queue list' file extension.
-" If support for XDCC Catcher is needed in the future, the contents of the file
-" needs to be inspected.
-au BufNewFile,BufRead *.cql setf cqlang
-
-" Crystal
-au BufNewFile,BufRead *.cr setf crystal
-
-" CSV Files
-au BufNewFile,BufRead *.csv setf csv
-
-" CUDA Compute Unified Device Architecture
-au BufNewFile,BufRead *.cu,*.cuh setf cuda
-
-" Cue
-au BufNewFile,BufRead *.cue setf cue
-
-" DAX
-au BufNewFile,BufRead *.dax setf dax
-
-" Debian devscripts
-au BufNewFile,BufRead devscripts.conf,.devscripts setf sh
-
" Dockerfile; Podman uses the same syntax with name Containerfile
" Also see Dockerfile.* below.
au BufNewFile,BufRead Containerfile,Dockerfile,dockerfile,*.[dD]ockerfile setf dockerfile
-" WildPackets EtherPeek Decoder
-au BufNewFile,BufRead *.dcd setf dcd
-
" Enlightenment configuration files
au BufNewFile,BufRead *enlightenment/*.cfg setf c
au BufNewFile,BufRead *.ex call dist#ft#ExCheck()
" Elixir
-au BufRead,BufNewFile mix.lock,*.exs setf elixir
-au BufRead,BufNewFile *.eex,*.leex setf eelixir
-
-" Elvish
-au BufRead,BufNewFile *.elv setf elvish
+au BufNewFile,BufRead mix.lock,*.exs setf elixir
+au BufNewFile,BufRead *.eex,*.leex setf eelixir
" Euphoria 3 or 4
au BufNewFile,BufRead *.eu,*.ew,*.exu,*.exw call dist#ft#EuphoriaCheck()
" Execline (s6) scripts
au BufNewFile,BufRead *s6*/\(up\|down\|run\|finish\) setf execline
-" Fontconfig config files
-au BufNewFile,BufRead fonts.conf setf xml
-
" Faust
-au BufNewFile,BufRead *.lib setf faust
au BufNewFile,BufRead *.dsp call dist#ft#FTdsp()
-" Libreoffice config files
-au BufNewFile,BufRead *.xcu,*.xlb,*.xlc,*.xba setf xml
-au BufNewFile,BufRead psprint.conf,sofficerc setf dosini
-
-" Libtool files
-au BufNewFile,BufRead *.lo,*.la,*.lai setf sh
-
-" Lynx config files
-au BufNewFile,BufRead lynx.cfg setf lynx
-
-" LyRiCs
-au BufNewFile,BufRead *.lrc setf lyrics
-
-" Mamba configuration file
-au BufNewFile,BufRead .mambarc,mambarc setf yaml
-
-" MLIR
-au BufNewFile,BufRead *.mlir setf mlir
-
" Modula-3 configuration language (must be before *.cfg and *makefile)
au BufNewFile,BufRead *.quake,cm3.cfg setf m3quake
au BufNewFile,BufRead m3makefile,m3overrides setf m3build
-" XDG mimeapps.list
-au BufNewFile,BufRead mimeapps.list setf dosini
-
" Many tools written in Python use dosini as their config
" like setuptools, pudb, coverage, pypi, gitlint, oelint-adv, pylint, bpython, mypy
" (must be before *.cfg)
-au BufNewFile,BufRead pip.conf,setup.cfg,pudb.cfg,.coveragerc,.pypirc,.gitlint,.oelint.cfg setf dosini
au BufNewFile,BufRead {.,}pylintrc,*/bpython/config,*/mypy/config setf dosini
" Many tools written in Python use toml as their config, like black
-au BufNewFile,BufRead .black setf toml
au BufNewFile,BufRead black
\ if getline(1) =~ 'tool.back'
\| setf toml
au BufNewFile,BufRead *baseq[2-3]/*.cfg,*id1/*.cfg setf quake
au BufNewFile,BufRead *quake[1-3]/*.cfg setf quake
-" Quake C
-au BufNewFile,BufRead *.qc setf c
-
" LaTeX packages use LaTeX as their configuration, such as:
" ~/.texlive/texmf-config/tex/latex/hyperref/hyperref.cfg
" ~/.texlive/texmf-config/tex/latex/docstrip/docstrip.cfg
au BufNewFile,BufRead */tex/latex/**.cfg setf tex
-" Wakatime config
-au BufNewFile,BufRead .wakatime.cfg setf dosini
-
" Configure files
au BufNewFile,BufRead *.cfg call dist#ft#FTcfg()
if has("fname_case")
au BufNewFile,BufRead *.Cfg,*.CFG call dist#ft#FTcfg()
endif
-" Cucumber
-au BufNewFile,BufRead *.feature setf cucumber
-
-" Communicating Sequential Processes
-au BufNewFile,BufRead *.csp,*.fdr setf csp
-
-" CUPL logic description and simulation
-au BufNewFile,BufRead *.pld setf cupl
-au BufNewFile,BufRead *.si setf cuplsim
-
-" Dafny
-au BufNewFile,BufRead *.dfy setf dafny
-
-" Dart
-au BufRead,BufNewfile *.dart,*.drt setf dart
-
" Debian autopkgtest
au BufNewFile,BufRead */debian/tests/control setf autopkgtest
au BufNewFile,BufRead */etc/apt/sources.list.d/*.list setf debsources
au BufNewFile,BufRead */etc/apt/sources.list.d/*.sources setf deb822sources
-" Deno history
-au BufNewFile,BufRead deno_history.txt setf javascript
-
-" Deny hosts
-au BufNewFile,BufRead denyhosts.conf setf denyhosts
-
-" Dhall
-au BufNewFile,BufRead *.dhall setf dhall
-
" dnsmasq(8) configuration files
au BufNewFile,BufRead */etc/dnsmasq.conf setf dnsmasq
-" ROCKLinux package description
-au BufNewFile,BufRead *.desc setf desc
-
" the D language or dtrace
au BufNewFile,BufRead */dtrace/*.d setf dtrace
au BufNewFile,BufRead *.d call dist#ft#DtraceCheck()
-" Desktop files
-au BufNewFile,BufRead *.desktop,*.directory setf desktop
-
-" Dict config
-au BufNewFile,BufRead dict.conf,.dictrc setf dictconf
-
" Dictd config
au BufNewFile,BufRead dictd*.conf setf dictdconf
au BufNewFile,BufRead */debian/patches/* call dist#ft#Dep3patch()
" Diff files
-au BufNewFile,BufRead *.diff,*.rej setf diff
au BufNewFile,BufRead *.patch
\ if getline(1) =~# '^From [0-9a-f]\{40,\} Mon Sep 17 00:00:00 2001$' |
\ setf gitsendemail |
" DCL (Digital Command Language - vms) or DNS zone file
au BufNewFile,BufRead *.com call dist#ft#BindzoneCheck('dcl')
-" DOT
-au BufNewFile,BufRead *.dot,*.gv setf dot
-
" Dune
au BufNewFile,BufRead jbuild,dune,dune-project,dune-workspace,dune-file setf dune
-" Dylan - lid files
-au BufNewFile,BufRead *.lid setf dylanlid
-
-" Dylan - intr files (melange)
-au BufNewFile,BufRead *.intr setf dylanintr
-
-" Dylan
-au BufNewFile,BufRead *.dylan setf dylan
-
" Microsoft Module Definition or Modula-2
au BufNewFile,BufRead *.def call dist#ft#FTdef()
au BufNewFile,BufRead *.DEF setf modula2
endif
-" Dracula
-au BufNewFile,BufRead *.drac,*.drc,*.lvs,*.lpe setf dracula
-
-" Datascript
-au BufNewFile,BufRead *.ds setf datascript
-
" dsl: DSSSL or Structurizr
au BufNewFile,BufRead *.dsl
\ if getline(1) =~ '^\s*<\!' |
\ setf structurizr |
\ endif
-" DTD (Document Type Definition for XML)
-au BufNewFile,BufRead *.dtd setf dtd
-
-" Devicetree (.its for U-Boot Flattened Image Trees, .keymap for ZMK keymap, and
-" .overlay for Zephyr overlay)
-au BufNewFile,BufRead *.dts,*.dtsi,*.dtso setf dts
-au BufNewFile,BufRead *.its setf dts
-au BufNewFile,BufRead *.keymap setf dts
-au BufNewFile,BufRead *.overlay setf dts
-
-" Earthfile
-au BufNewFile,BufRead Earthfile setf earthfile
-
" EDIF (*.edf,*.edif,*.edn,*.edo) or edn
au BufNewFile,BufRead *.ed\(f\|if\|o\) setf edif
au BufNewFile,BufRead *.edn
\ setf clojure |
\ endif
-" EditorConfig
-au BufNewFile,BufRead .editorconfig setf editorconfig
-
-" Embedix Component Description
-au BufNewFile,BufRead *.ecd setf ecd
-
" Eiffel or Specman or Euphoria
au BufNewFile,BufRead *.e,*.E call dist#ft#FTe()
-" Elinks configuration
-au BufNewFile,BufRead elinks.conf setf elinks
-
-" ERicsson LANGuage; Yaws is erlang too
-au BufNewFile,BufRead *.erl,*.hrl,*.yaws setf erlang
-
-" Elm
-au BufNewFile,BufRead *.elm setf elm
-
" Elm Filter Rules file
au BufNewFile,BufRead filter-rules setf elmfilt
-" Elsa - https://github.com/ucsd-progsys/elsa
-au BufNewFile,BufRead *.lc setf elsa
-
-" EdgeDB Schema Definition Language
-au BufNewFile,BufRead *.esdl setf esdl
-
" ESMTP rc file
au BufNewFile,BufRead *esmtprc setf esmtprc
-" ESQL-C
-au BufNewFile,BufRead *.ec,*.EC setf esqlc
-
-" Esterel
-au BufNewFile,BufRead *.strl setf esterel
-
-" Essbase script
-au BufNewFile,BufRead *.csc setf csc
-
-" Exim
-au BufNewFile,BufRead exim.conf setf exim
-
-" Expect
-au BufNewFile,BufRead *.exp setf expect
-
-" Exports
-au BufNewFile,BufRead exports setf exports
-
-" Falcon
-au BufNewFile,BufRead *.fal setf falcon
-
-" Fantom
-au BufNewFile,BufRead *.fan,*.fwt setf fan
-
-" Factor
-au BufNewFile,BufRead *.factor setf factor
-
" Fennel
-autocmd BufRead,BufNewFile *.fnl,{,.}fennelrc setf fennel
-
-" Fetchmail RC file
-au BufNewFile,BufRead .fetchmailrc setf fetchmail
-
-" FGA
-au BufNewFile,BufRead *.fga setf fga
-
-" FIRRTL - Flexible Internal Representation for RTL
-au BufNewFile,BufRead *.fir setf firrtl
-
-" Fish shell
-au BufNewFile,BufRead *.fish setf fish
+au BufNewFile,BufRead *.fnl,{,.}fennelrc setf fennel
" Flatpak config
au BufNewFile,BufRead */flatpak/repo/config setf dosini
-" Flix
-au BufNewFile,BufRead *.flix setf flix
-
-" Focus Executable
-au BufNewFile,BufRead *.fex,*.focexec setf focexec
-
-" Focus Master file (but not for auto.master)
-au BufNewFile,BufRead auto.master setf conf
-au BufNewFile,BufRead *.mas,*.master setf master
-
-" Forth
-au BufNewFile,BufRead *.ft,*.fth,*.4th setf forth
-
-" Reva Forth
-au BufNewFile,BufRead *.frt setf reva
-
" Fortran
if has("fname_case")
au BufNewFile,BufRead *.F,*.FOR,*.FPP,*.FTN,*.F77,*.F90,*.F95,*.F03,*.F08 setf fortran
" Fortran or Forth
au BufNewFile,BufRead *.f call dist#ft#FTf()
-" Framescript
-au BufNewFile,BufRead *.fsl setf framescript
-
-" FStab
-au BufNewFile,BufRead fstab,mtab setf fstab
-
-" Func
-au BufNewFile,BufRead *.fc setf func
-
-" Fusion
-au BufRead,BufNewFile *.fusion setf fusion
-
" F# or Forth
au BufNewFile,BufRead *.fs call dist#ft#FTfs()
-" FHIR Shorthand (FSH)
-au BufNewFile,BufRead *.fsh setf fsh
-
-" F#
-au BufNewFile,BufRead *.fsi,*.fsx setf fsharp
-
" GDB command files
au BufNewFile,BufRead .gdbinit,gdbinit,.cuda-gdbinit,cuda-gdbinit,.gdbearlyinit,gdbearlyinit,*.gdb setf gdb
-" GDMO
-au BufNewFile,BufRead *.mo,*.gdmo setf gdmo
-
-" GDscript
-au BufNewFile,BufRead *.gd setf gdscript
-
-" Godot resource
-au BufRead,BufNewFile *.tscn,*.tres setf gdresource
-
-" Godot shader
-au BufRead,BufNewFile *.gdshader,*.shader setf gdshader
-
" Gedcom
au BufNewFile,BufRead *.ged,lltxxxxx.txt setf gedcom
-" Gemtext
-au BufNewFile,BufRead *.gmi,*.gemini setf gemtext
-
-" Gift (Moodle)
-autocmd BufRead,BufNewFile *.gift setf gift
-
" Git
-au BufNewFile,BufRead COMMIT_EDITMSG,MERGE_MSG,TAG_EDITMSG setf gitcommit
-au BufNewFile,BufRead NOTES_EDITMSG,EDIT_DESCRIPTION setf gitcommit
au BufNewFile,BufRead *.git/config,.gitconfig,*/etc/gitconfig setf gitconfig
au BufNewFile,BufRead */.config/git/config setf gitconfig
au BufNewFile,BufRead *.git/config.worktree setf gitconfig
au BufNewFile,BufRead .rgignore,.dockerignore,.containerignore setf gitignore
au BufNewFile,BufRead .npmignore,.vscodeignore setf gitignore
au BufNewFile,BufRead git-rebase-todo setf gitrebase
-au BufRead,BufNewFile .gitsendemail.msg.?????? setf gitsendemail
+au BufNewFile,BufRead .gitsendemail.msg.?????? setf gitsendemail
au BufNewFile,BufRead *.git/*
\ if getline(1) =~# '^\x\{40,\}\>\|^ref: ' |
\ setf git |
" Gkrellmrc
au BufNewFile,BufRead gkrellmrc,gkrellmrc_? setf gkrellmrc
-" Gleam
-au BufNewFile,BufRead *.gleam setf gleam
-
-" GLSL
-" Extensions supported by Khronos reference compiler (with one exception, ".glsl")
-" https://github.com/KhronosGroup/glslang
-au BufNewFile,BufRead *.vert,*.tesc,*.tese,*.glsl,*.geom,*.frag,*.comp,*.rgen,*.rmiss,*.rchit,*.rahit,*.rint,*.rcall setf glsl
-
-" GN (generate ninja) files
-au BufNewFile,BufRead *.gn,*.gni setf gn
-
" GP scripts (2.0 and onward)
au BufNewFile,BufRead *.gp,.gprc setf gp
au BufNewFile,BufRead $GNUPGHOME/gpg.conf setf gpg
endif
-" gnash(1) configuration files
-au BufNewFile,BufRead gnashrc,.gnashrc,gnashpluginrc,.gnashpluginrc setf gnash
-
" Gitolite
-au BufNewFile,BufRead gitolite.conf setf gitolite
au BufNewFile,BufRead {,.}gitolite.rc,example.gitolite.rc setf perl
-" Glimmer-flavored TypeScript and JavaScript
-au BufNewFile,BufRead *.gts setf typescript.glimmer
-au BufNewFile,BufRead *.gjs setf javascript.glimmer
-
" Gnuplot scripts
au BufNewFile,BufRead *.gpi,*.gnuplot,.gnuplot_history setf gnuplot
\ setf yaml |
\ endif
-" Go (Google)
-au BufNewFile,BufRead *.go setf go
-au BufNewFile,BufRead Gopkg.lock setf toml
-au BufRead,BufNewFile go.work setf gowork
-
-" GoAccess configuration
-au BufNewFile,BufRead goaccess.conf setf goaccess
-
-" GrADS scripts
-au BufNewFile,BufRead *.gs setf grads
-
-" GraphQL
-au BufNewFile,BufRead *.graphql,*.graphqls,*.gql setf graphql
-
-" Gretl
-au BufNewFile,BufRead *.gretl setf gretl
-
" Groovy
au BufNewFile,BufRead *.gradle,*.groovy,Jenkinsfile setf groovy
-" GNU Server Pages
-au BufNewFile,BufRead *.gsp setf gsp
-
" Group file
au BufNewFile,BufRead */etc/group,*/etc/group-,*/etc/group.edit,*/etc/gshadow,*/etc/gshadow-,*/etc/gshadow.edit,*/var/backups/group.bak,*/var/backups/gshadow.bak setf group
-" GTK RC
-au BufNewFile,BufRead .gtkrc,gtkrc setf gtkrc
-
-" GYP
-au BufNewFile,BufRead *.gyp,*.gypi setf gyp
-
-" Hack
-au BufRead,BufNewFile *.hack,*.hackpartial setf hack
-
-" Haml
-au BufNewFile,BufRead *.haml setf haml
-
-" Hamster Classic | Playground files
-au BufNewFile,BufRead *.hsm setf hamster
-
-" Handlebars
-au BufNewFile,BufRead *.hbs setf handlebars
-
" Hare
-au BufNewFile,BufRead *.ha setf hare
au BufNewFile,BufRead README call dist#ft#FTharedoc()
" Haskell
-au BufNewFile,BufRead *.hs,*.hsc,*.hs-boot,*.hsig setf haskell
-au BufNewFile,BufRead *.lhs setf lhaskell
-au BufNewFile,BufRead *.chs setf chaskell
-au BufNewFile,BufRead cabal.project setf cabalproject
au BufNewFile,BufRead */{.,}cabal/config setf cabalconfig
au BufNewFile,BufRead cabal.config setf cabalconfig
au BufNewFile,BufRead *.persistentmodels setf haskellpersistent
-" Haste
-au BufNewFile,BufRead *.ht setf haste
-au BufNewFile,BufRead *.htpp setf hastepreproc
-
-" Haxe
-au BufNewFile,BufRead *.hx setf haxe
-
-" HCL
-au BufRead,BufNewFile *.hcl setf hcl
-
-" Go checksum file (must be before *.sum Hercules)
-au BufNewFile,BufRead go.sum,go.work.sum setf gosum
-
-" Hercules
-au BufNewFile,BufRead *.vc,*.ev,*.sum,*.errsum setf hercules
-
-" HEEx
-au BufRead,BufNewFile *.heex setf heex
-
-" HEX (Intel)
-au BufNewFile,BufRead *.hex,*.ihex,*.int,*.ihe,*.ihx,*.mcs,*.h32,*.h80,*.h86,*.a43,*.a90 setf hex
-
-" Hjson
-au BufNewFile,BufRead *.hjson setf hjson
-
-" HLS Playlist (or another form of playlist)
-au BufNewFile,BufRead *.m3u,*.m3u8 setf hlsplaylist
-
-" Hollywood
-au BufRead,BufNewFile *.hws setf hollywood
-
-" Hoon
-au BufRead,BufNewFile *.hoon setf hoon
-
-" TI Code Composer Studio General Extension Language
-au BufNewFile,BufRead *.gel setf gel
-
" Tilde (must be before HTML)
au BufNewFile,BufRead *.t.html setf tilde
au BufNewFile,BufRead *.html,*.htm,*.shtml,*.stm call dist#ft#FThtml()
au BufNewFile,BufRead *.cshtml setf html
-" HTTP request files
-au BufNewFile,BufRead *.http setf http
-
-" HTML with Ruby - eRuby
-au BufNewFile,BufRead *.erb,*.rhtml setf eruby
-
-" Some template. Used to be HTML Cheetah.
-au BufNewFile,BufRead *.tmpl setf template
-
" Host config
au BufNewFile,BufRead */etc/host.conf setf hostconf
" Hosts access
au BufNewFile,BufRead */etc/hosts.allow,*/etc/hosts.deny setf hostsaccess
-" Hurl
-au BufRead,BufNewFile *.hurl setf hurl
-
" Hy
-au BufRead,BufNewFile *.hy,.hy-history setf hy
-
-" Hyper Builder
-au BufNewFile,BufRead *.hb setf hb
+au BufNewFile,BufRead *.hy,.hy-history setf hy
" Hyprland Configuration language
au BufNewFile,BufRead */hypr/*.conf,hypr\(land\|paper\|idle\|lock\).conf setf hyprlang
-" Httest
-au BufNewFile,BufRead *.htt,*.htb setf httest
-
" i3
au BufNewFile,BufRead */i3/config setf i3config
au BufNewFile,BufRead */.i3/config setf i3config
au BufNewFile,BufRead */sway/config.d/* setf swayconfig
au BufNewFile,BufRead */.sway/config setf swayconfig
-" Icon
-au BufNewFile,BufRead *.icn setf icon
-
" IDL (Interface Description Language)
au BufNewFile,BufRead *.idl call dist#ft#FTidl()
-" Microsoft IDL (Interface Description Language) Also *.idl
-" MOF = WMI (Windows Management Instrumentation) Managed Object Format
-au BufNewFile,BufRead *.odl,*.mof setf msidl
-
" Icewm menu
au BufNewFile,BufRead */.icewm/menu setf icemenu
" Indent profile (must come before IDL *.pro!)
-au BufNewFile,BufRead .indent.pro setf indent
au BufNewFile,BufRead indent.pro call dist#ft#ProtoCheck('indent')
" IDL (Interactive Data Language), Prolog, Cproto or zsh module C
au BufNewFile,BufRead *.pro call dist#ft#ProtoCheck('idlang')
-" Idris2
-au BufNewFile,BufRead *.idr setf idris2
-au BufNewFile,BufRead *.lidr setf lidris2
-
-" Indent RC
-au BufNewFile,BufRead indentrc setf indent
-
-" Inform
-au BufNewFile,BufRead *.inf,*.INF setf inform
-
" Initng
au BufNewFile,BufRead */etc/initng/*/*.i,*.ii setf initng
" Innovation Data Processing
-au BufRead,BufNewFile upstream.dat\c,upstream.*.dat\c,*.upstream.dat\c setf upstreamdat
-au BufRead,BufNewFile fdrupstream.log,upstream.log\c,upstream.*.log\c,*.upstream.log\c,UPSTREAM-*.log\c setf upstreamlog
-au BufRead,BufNewFile upstreaminstall.log\c,upstreaminstall.*.log\c,*.upstreaminstall.log\c setf upstreaminstalllog
-au BufRead,BufNewFile usserver.log\c,usserver.*.log\c,*.usserver.log\c setf usserverlog
-au BufRead,BufNewFile usw2kagt.log\c,usw2kagt.*.log\c,*.usw2kagt.log\c setf usw2kagtlog
-
-" Ipfilter
-au BufNewFile,BufRead ipf.conf,ipf6.conf,ipf.rules setf ipfilter
-
-" Ipkg for Idris 2 language
-au BufNewFile,BufRead *.ipkg setf ipkg
-
-" Informix 4GL (source - canonical, include file, I4GL+M4 preproc.)
-au BufNewFile,BufRead *.4gl,*.4gh,*.m4gl setf fgl
-
-" .INI file for MSDOS
-au BufNewFile,BufRead *.ini,*.INI setf dosini
-
-" SysV Inittab
-au BufNewFile,BufRead inittab setf inittab
-
-" Inko
-au BufNewFile,BufRead *.inko setf inko
-
-" Inno Setup
-au BufNewFile,BufRead *.iss setf iss
-
-" J
-au BufNewFile,BufRead *.ijs setf j
-
-" JAL
-au BufNewFile,BufRead *.jal,*.JAL setf jal
-
-" Jam
-au BufNewFile,BufRead *.jpl,*.jpr setf jam
-
-" Janet
-au BufNewFile,BufRead *.janet setf janet
-
-" Java
-au BufNewFile,BufRead *.java,*.jav,*.jsh setf java
-
-" JavaCC
-au BufNewFile,BufRead *.jj,*.jjt setf javacc
-
-" JavaScript, ECMAScript, ES module script, CommonJS script
-au BufNewFile,BufRead *.js,*.jsm,*.javascript,*.es,*.mjs,*.cjs setf javascript
-au BufNewFile,BufRead .node_repl_history setf javascript
-
-" JavaScript with React
-au BufNewFile,BufRead *.jsx setf javascriptreact
-
-" Java Server Pages
-au BufNewFile,BufRead *.jsp setf jsp
+au BufNewFile,BufRead upstream.dat\c,upstream.*.dat\c,*.upstream.dat\c setf upstreamdat
+au BufNewFile,BufRead fdrupstream.log,upstream.log\c,upstream.*.log\c,*.upstream.log\c,UPSTREAM-*.log\c setf upstreamlog
+au BufNewFile,BufRead upstreaminstall.log\c,upstreaminstall.*.log\c,*.upstreaminstall.log\c setf upstreaminstalllog
+au BufNewFile,BufRead usserver.log\c,usserver.*.log\c,*.usserver.log\c setf usserverlog
+au BufNewFile,BufRead usw2kagt.log\c,usw2kagt.*.log\c,*.usw2kagt.log\c setf usw2kagtlog
" Java Properties resource file (note: doesn't catch font.properties.pl)
au BufNewFile,BufRead *.properties,*.properties_??,*.properties_??_?? setf jproperties
" Eclipse preference files use Java Properties syntax
au BufNewFile,BufRead org.eclipse.*.prefs setf jproperties
-" Jess
-au BufNewFile,BufRead *.clp setf jess
-
-" Jgraph
-au BufNewFile,BufRead *.jgr setf jgraph
-
-" Jinja
-au BufNewFile,BufRead *.jinja setf jinja
-
-" Jujutsu
-au BufNewFile,BufRead *.jjdescription setf jjdescription
-
-" Jovial
-au BufNewFile,BufRead *.jov,*.j73,*.jovial setf jovial
-
-" Jq
-au BufNewFile,BufRead *.jq setf jq
-
-" JSON5
-au BufNewFile,BufRead *.json5 setf json5
-
-" JSON Patch (RFC 6902)
-au BufNewFile,BufRead *.json-patch setf json
-
-" Geojson is also json
-au BufNewFile,BufRead *.geojson setf json
-
-" Jupyter Notebook and jupyterlab config is also json
-au BufNewFile,BufRead *.ipynb,*.jupyterlab-settings setf json
-
-" Sublime config
-au BufNewFile,BufRead *.sublime-project,*.sublime-settings,*.sublime-workspace setf json
-
-" Other files that look like json
-au BufNewFile,BufRead .prettierrc,.firebaserc,.stylelintrc,.lintstagedrc,flake.lock,deno.lock,.swcrc,composer.lock,symfony.lock setf json
-
" JSONC (JSON with comments)
au BufNewFile,BufRead *.jsonc,.babelrc,.eslintrc,.jsfmtrc,bun.lock setf jsonc
au BufNewFile,BufRead .jshintrc,.jscsrc,.vsconfig,.hintrc,.swrc,[jt]sconfig*.json setf jsonc
" Visual Studio Code settings
-au BufRead,BufNewFile ~/*/{Code,VSCodium}/User/*.json setf jsonc
-
-" JSON
-au BufNewFile,BufRead *.json,*.jsonp,*.webmanifest setf json
-
-" JSON Lines
-au BufNewFile,BufRead *.jsonl setf jsonl
-
-" Jsonnet
-au BufNewFile,BufRead *.jsonnet,*.libsonnet setf jsonnet
-
-" Julia
-au BufNewFile,BufRead *.jl setf julia
+au BufNewFile,BufRead ~/*/{Code,VSCodium}/User/*.json setf jsonc
" Just
au BufNewFile,BufRead \c{,*.}justfile,\c*.just setf just
" Kitty
au BufNewFile,BufRead kitty.conf,*/kitty/*.conf setf kitty
-" KAREL
-au BufNewFile,BufRead *.kl setf karel
-if has("fname_case")
- au BufNewFile,BufRead *.KL setf karel
-endif
-
-" KDL
-au BufNewFile,BufRead *.kdl setf kdl
-
-" KerML
-au BufNewFile,BufRead *.kerml setf kerml
-
-" Kixtart
-au BufNewFile,BufRead *.kix setf kix
-
" Kuka Robot Language
au BufNewFile,BufRead *.src call dist#ft#FTsrc()
au BufNewFile,BufRead *.dat call dist#ft#FTdat()
au BufNewFile,BufRead *.Sub,*.SUB setf krl
endif
-" Kimwitu[++]
-au BufNewFile,BufRead *.k setf kwt
-
-" Kivy
-au BufNewFile,BufRead *.kv setf kivy
-
-" Kotlin
-au BufNewFile,BufRead *.kt,*.ktm,*.kts setf kotlin
-
-" KDE script
-au BufNewFile,BufRead *.ks setf kscript
-
-" Kconfig
-au BufNewFile,BufRead Kconfig,Kconfig.debug,Config.in setf kconfig
-
-" Kyaml
-au BufNewFile,BufRead *.kyaml,*.kyml setf yaml
-
-" Lace (ISE)
-au BufNewFile,BufRead *.ace,*.ACE setf lace
-
" Lalrpop
au BufNewFile,Bufread *.lalrpop setf lalrpop
" Larch Shared Language
au BufNewFile,BufRead .lsl call dist#ft#FTlsl()
-" Latexmkrc
-au BufNewFile,BufRead .latexmkrc,latexmkrc setf perl
-
-" Latte
-au BufNewFile,BufRead *.latte,*.lte setf latte
-
" Limits
au BufNewFile,BufRead */etc/limits,*/etc/*limits.conf,*/etc/*limits.d/*.conf setf limits
" LambdaProlog or SML (see dist#ft#FTmod for *.mod)
au BufNewFile,BufRead *.sig call dist#ft#FTsig()
-" LDAP configuration
-au BufNewFile,BufRead ldaprc,.ldaprc,ldap.conf setf ldapconf
-
-" LDAP LDIF
-au BufNewFile,BufRead *.ldif setf ldif
-
-" Luadoc, Ldoc (must be before *.ld)
-au BufNewFile,BufRead config.ld setf lua
-
" Ld loader
au BufNewFile,BufRead *.ld,*/ldscripts/* setf ld
-" Lean
-au BufNewFile,BufRead *.lean setf lean
-
-" Ledger
-au BufRead,BufNewFile *.ldg,*.ledger,*.journal setf ledger
-
-" lf configuration (lfrc)
-au BufNewFile,BufRead lfrc setf lf
-
-" Leo
-au BufNewFile,BufRead *.leo setf leo
-
-" Less
-au BufNewFile,BufRead *.less setf less
-
-" Lex
-au BufNewFile,BufRead *.lex,*.l,*.lxx,*.l++ setf lex
-
" Libao
au BufNewFile,BufRead */etc/libao.conf,*/.libao setf libao
" Lifelines, LLVM, or Lex for C++
au BufNewFile,BufRead *.ll call dist#ft#FTll()
-" Lilo: Linux loader
-au BufNewFile,BufRead lilo.conf setf lilo
-
-" Lilypond
-au BufNewFile,BufRead *.ly,*.ily setf lilypond
-
" Lisp (*.el = ELisp)
" *.jl was removed, it's also used for Julia, better skip than guess wrong.
if has("fname_case")
" *.cl = Common Lisp or OpenCL
au BufNewFile,BufRead *.cl call dist#ft#FTcl()
-" SBCL implementation of Common Lisp
-au BufNewFile,BufRead sbclrc,.sbclrc setf lisp
-
-" Liquidsoap
-au BufNewFile,BufRead *.liq setf liquidsoap
-
-" Liquid
-au BufNewFile,BufRead *.liquid setf liquid
-
-" Lite
-au BufNewFile,BufRead *.lite,*.lt setf lite
-
" LiteStep RC files
au BufNewFile,BufRead */LiteStep/*/*.rc setf litestep
-" Livebook
-au BufNewFile,BufRead *.livemd setf livebook
-
" Login access
au BufNewFile,BufRead */etc/login.access setf loginaccess
" Login defs
au BufNewFile,BufRead */etc/login.defs setf logindefs
-" Logtalk
-au BufNewFile,BufRead *.lgt setf logtalk
-
-" LOTOS
-au BufNewFile,BufRead *.lotos setf lotos
-
" LOTOS or LaTeX \listoftables files
au BufNewFile,BufRead *.lot
\ if getline(1) =~# '\\contentsline' |setf tex|else|setf lotos|endif
-" Lout (also: *.lt)
-au BufNewFile,BufRead *.lou,*.lout setf lout
-
" Lua, Texlua
au BufNewFile,BufRead *.lua,*.tlu,.lua_history setf lua
-" Luau
-au BufNewFile,BufRead *.luau setf luau
-
-" Luau config
-au BufNewFile,BufRead .luaurc setf jsonc
-
-" Luacheck
-au BufNewFile,BufRead .luacheckrc setf lua
-
" Luarocks
au BufNewFile,BufRead *.rockspec,rock_manifest setf lua
" Linden Scripting Language (Second Life)
au BufNewFile,BufRead *.lsl call dist#ft#FTlsl()
-" Lynx style file (or LotusScript!)
-au BufNewFile,BufRead *.lss setf lss
-
" M4
au BufNewFile,BufRead *.m4 call dist#ft#FTm4()
au BufNewFile,BufRead .m4_history setf m4
-" MaGic Point
-au BufNewFile,BufRead *.mgp setf mgp
-
" Mail (for Elm, trn, mutt, muttng, rn, slrn, neomutt)
au BufNewFile,BufRead snd.\d\+,.letter,.letter.\d\+,.followup,.article,.article.\d\+,pico.\d\+,mutt{ng,}-*-\w\+,mutt[[:alnum:]_-]\\\{6\},neomutt-*-\w\+,neomutt[[:alnum:]_-]\\\{6\},ae\d\+.txt,/tmp/SLRN[0-9A-Z.]\+,*.eml setf mail
" Mail aliases
au BufNewFile,BufRead */etc/mail/aliases,*/etc/aliases setf mailaliases
-" Mailcap configuration file
-au BufNewFile,BufRead .mailcap,mailcap setf mailcap
-
" Makefile
au BufNewFile,BufRead *[mM]akefile,*.mk,*.mak call dist#ft#FTmake()
au BufNewFile,BufRead Kbuild setf make
-" MakeIndex
-au BufNewFile,BufRead *.ist,*.mst setf ist
-
-" Mallard
-au BufNewFile,BufRead *.page setf mallard
-
-" Manpage
-au BufNewFile,BufRead *.man setf man
-
" Man config
au BufNewFile,BufRead */etc/man.conf,man.config setf manconf
-" Maple V
-au BufNewFile,BufRead *.mv,*.mpl,*.mws setf maple
-
" Map (UMN mapserver config file)
au BufNewFile,BufRead *.map
\ if getline(1) =~ '^\*\+$' |
\ setf markdown |
\ endif
-" Mason (it used to include *.comp, are those Mason files?)
-au BufNewFile,BufRead *.mason,*.mhtml setf mason
-
" Mathematica, Matlab, Murphi, Objective C or Octave
au BufNewFile,BufRead *.m call dist#ft#FTm()
-" Mathematica notebook and package files
-au BufNewFile,BufRead *.nb,*.wl setf mma
-
-" Maya Extension Language
-au BufNewFile,BufRead *.mel setf mel
-
" mbsync
au BufNewFile,BufRead *.mbsyncrc,isyncrc setf mbsync
-" mcmeta
-au BufNewFile,BufRead *.mcmeta setf json
-
-" MediaWiki
-au BufNewFile,BufRead *.mw,*.wiki setf mediawiki
-
" Mercurial (hg) commit file
au BufNewFile,BufRead hg-editor-*.txt setf hgcommit
" Mercurial config (looks like generic config file)
au BufNewFile,BufRead *.hgrc,*hgrc setf cfg
-" Mermaid
-au BufNewFile,BufRead *.mmd,*.mmdc,*.mermaid setf mermaid
-
-" Meson Build system config
-au BufNewFile,BufRead meson.build,meson.options,meson_options.txt setf meson
-au BufNewFile,BufRead *.wrap setf dosini
-
-" Metafont
-au BufNewFile,BufRead *.mf setf mf
-
" MetaPost
-au BufNewFile,BufRead *.mp setf mp
au BufNewFile,BufRead *.mpxl,*.mpiv,*.mpvi let b:mp_metafun = 1 | setf mp
-" MGL
-au BufNewFile,BufRead *.mgl setf mgl
-
-" MIX - Knuth assembly
-au BufNewFile,BufRead *.mix,*.mixal setf mix
-
" MMIX or VMS makefile
au BufNewFile,BufRead *.mms call dist#ft#FTmms()
-" msmtp
-au BufNewFile,BufRead .msmtprc setf msmtp
-
-" Symbian meta-makefile definition (MMP)
-au BufNewFile,BufRead *.mmp setf mmp
-
" ABB Rapid, Modula-2, Modsim III or LambdaProlog
au BufNewFile,BufRead *.mod call dist#ft#FTmod()
if has("fname_case")
" Modula-3 (.m3, .i3, .mg, .ig)
au BufNewFile,BufRead *.[mi][3g] setf modula3
-" Larch/Modula-3
-au BufNewFile,BufRead *.lm3 setf modula3
-
" Modconf
au BufNewFile,BufRead */etc/modules.conf,*/etc/modules,*/etc/conf.modules setf modconf
-" Monk
-au BufNewFile,BufRead *.isc,*.monk,*.ssc,*.tsc setf monk
-
-" MOO
-au BufNewFile,BufRead *.moo setf moo
-
-" Moonscript
-au BufNewFile,BufRead *.moon setf moonscript
-
-" Move language
-au BufNewFile,BufRead *.move setf move
-
-" MPD is based on XML
-au BufNewFile,BufRead *.mpd setf xml
-
" Mplayer config
au BufNewFile,BufRead mplayer.conf,*/.mplayer/config setf mplayerconf
-" Motorola S record
-au BufNewFile,BufRead *.s19,*.s28,*.s37,*.mot,*.srec setf srec
-
-" Mrxvtrc
-au BufNewFile,BufRead mrxvtrc,.mrxvtrc setf mrxvtrc
-
-" Msql
-au BufNewFile,BufRead *.msql setf msql
-
" Mysql
au BufNewFile,BufRead *.mysql,.mysql_history setf mysql
" Mojo files use either .mojo or .🔥 as extension
au BufNewFile,BufRead *.mojo,*.🔥 setf mojo
-" MuPAD source
-au BufRead,BufNewFile *.mu setf mupad
-
-" Mush
-au BufNewFile,BufRead *.mush setf mush
-
-" Mustache
-au BufNewFile,BufRead *.mustache setf mustache
-
" Mutt setup file (also for Muttng)
au BufNewFile,BufRead Mutt{ng,}rc setf muttrc
-" N1QL
-au BufRead,BufNewfile *.n1ql,*.nql setf n1ql
-
" Neomutt log
au BufNewFile,BufRead *.neomuttdebug* setf neomuttlog
" Natural
au BufNewFile,BufRead *.NS[ACGLMNPS] setf natural
-" Noemutt setup file
-au BufNewFile,BufRead Neomuttrc setf neomuttrc
-
-" Netrc
-au BufNewFile,BufRead .netrc setf netrc
-
" Neofetch
au BufNewFile,BufRead */neofetch/config.conf setf sh
" Nginx
au BufNewFile,BufRead *.nginx,nginx*.conf,*nginx.conf,*/nginx/*.conf setf nginx
-" Nim file
-au BufNewFile,BufRead *.nim,*.nims,*.nimble setf nim
-
-" Ninja file
-au BufNewFile,BufRead *.ninja setf ninja
-
-" Nix
-au BufRead,BufNewFile *.nix setf nix
-
-" Norg
-au BufNewFile,BufRead *.norg setf norg
-
-" NPM RC file
-au BufNewFile,BufRead npmrc,.npmrc setf dosini
-
-" Novell netware batch files
-au BufNewFile,BufRead *.ncf setf ncf
-
" Nroff/Troff (*.ms and *.t are checked below)
au BufNewFile,BufRead *.me
\ if expand("<afile>") != "read.me" && expand("<afile>") != "click.me" |
" Nroff or Objective C++
au BufNewFile,BufRead *.mm call dist#ft#FTmm()
-" Not Quite C
-au BufNewFile,BufRead *.nqc setf nqc
-
" notmuch
au BufNewFile,BufRead .notmuch-config{,.*} setf dosini
au BufNewFile,BufRead ~/.config/notmuch/*/config setf dosini
au BufNewFile,BufRead $XDG_CONFIG_HOME/notmuch/*/config setf dosini
endif
-" NSE - Nmap Script Engine - uses Lua syntax
-au BufNewFile,BufRead *.nse setf lua
-
-" NSIS
-au BufNewFile,BufRead *.nsi,*.nsh setf nsis
-
-" N-Triples
-au BufNewFile,BufRead *.nt setf ntriples
-
-" Nu
-au BufNewFile,BufRead *.nu setf nu
-
-" Numbat
-au BufNewFile,BufRead *.nbt setf numbat
-
-" Oblivion Language and Oblivion Script Extender
-au BufNewFile,BufRead *.obl,*.obse,*.oblivion,*.obscript setf obse
-
-" Objdump
-au BufNewFile,BufRead *.objdump,*.cppobjdump setf objdump
-
" OCaml
au BufNewFile,BufRead *.ml,*.mli,*.mll,*.mly,.ocamlinit,*.mlt,*.mlp,*.mlip,*.mli.cppo,*.ml.cppo setf ocaml
-" Occam
-au BufNewFile,BufRead *.occ setf occam
-
" Octave
au BufNewFile,BufRead octave.conf,.octaverc,octaverc,*/octave/history setf octave
-" Odin
-au BufNewFile,BufRead *.odin setf odin
-
-" Omnimark
-au BufNewFile,BufRead *.xom,*.xin setf omnimark
-
-" ondir
-au BufNewFile,BufRead .ondirrc setf ondir
-
" OPAM
au BufNewFile,BufRead opam,*.opam,*.opam.template,opam.locked,*.opam.locked setf opam
-" OpenAL Soft config files
-au BufNewFile,BufRead .alsoftrc,alsoft.conf,alsoft.ini,alsoftrc.sample setf dosini
-
" OpenFOAM
au BufNewFile,BufRead fvSchemes,fvSolution,fvConstrains,fvModels,*/constant/g call dist#ft#FTfoam()
-" OpenROAD
-au BufNewFile,BufRead *.or setf openroad
-
-" OPL
-au BufNewFile,BufRead *.[Oo][Pp][Ll] setf opl
-
-" OpenSCAD
-au BufNewFile,BufRead *.scad setf openscad
-
-" Oracle config file
-au BufNewFile,BufRead *.ora setf ora
-
-" Org (Emacs' org-mode)
-au BufNewFile,BufRead *.org,*.org_archive setf org
-
-" Packet filter conf
-au BufNewFile,BufRead pf.conf setf pf
+" OPL
+au BufNewFile,BufRead *.[Oo][Pp][Ll] setf opl
" ini style config files, using # comments
-au BufNewFile,BufRead pacman.conf,mpv.conf setf confini
au BufNewFile,BufRead */.aws/config,*/.aws/credentials,*/.aws/cli/alias setf confini
au BufNewFile,BufRead *.nmconnection setf confini
au BufNewFile,BufRead paru.conf setf confini
" Pam conf
au BufNewFile,BufRead */etc/pam.conf setf pamconf
-" Pam environment
-au BufNewFile,BufRead pam_env.conf,.pam_environment setf pamenv
-
-" PApp
-au BufNewFile,BufRead *.papp,*.pxml,*.pxsl setf papp
-
" Password file
au BufNewFile,BufRead */etc/passwd,*/etc/passwd-,*/etc/passwd.edit,*/etc/shadow,*/etc/shadow-,*/etc/shadow.edit,*/var/backups/passwd.bak,*/var/backups/shadow.bak setf passwd
-" Pascal (also *.p, *.pp, *.inc)
-au BufNewFile,BufRead *.pas setf pascal
-
" Pascal or Puppet manifest
au BufNewFile,BufRead *.pp call dist#ft#FTpp()
-" Delphi
-au BufNewFile,BufRead *.dpr setf pascal
-
" Xilinx labtools project file or Lazarus program file
au BufNewFile,BufRead *.lpr
\ if getline(1) =~# "<?xml" |
\ setf pascal |
\ endif
-" Free Pascal makefile definition file
-au BufNewFile,BufRead *.fpc setf fpcmake
-
-" Path of Exile item filter
-au BufNewFile,BufRead *.filter setf poefilter
-
-" PDF
-au BufNewFile,BufRead *.pdf setf pdf
-
-" PCMK - HAE - crm configure edit
-au BufNewFile,BufRead *.pcmk setf pcmk
-
-" PEM (Privacy-Enhanced Mail)
-au BufNewFile,BufRead *.pem,*.cer,*.crt,*.csr setf pem
-
" Perl or Prolog
if has("fname_case")
au BufNewFile,BufRead *.pl,*.PL call dist#ft#FTpl()
endif
au BufNewFile,BufRead *.plx,*.al,*.psgi setf perl
-" Perl Reply
-au BufNewFile,BufRead .replyrc setf dosini
-
" Perl, XPM or XPM2
au BufNewFile,BufRead *.pm
\ if getline(1) =~ "XPM2" |
\ setf perl |
\ endif
-" Perl POD
-au BufNewFile,BufRead *.pod setf pod
-
" Php, php3, php4, etc.
" Also Phtml (was used for PHP 2 in the past).
" Also .ctp for Cake template file.
" Also .theme for Drupal theme files.
au BufNewFile,BufRead *.php,*.php\d,*.phtml,*.ctp,*.phpt,*.theme setf php
-" Pike and Cmod
-au BufNewFile,BufRead *.pike,*.pmod setf pike
-au BufNewFile,BufRead *.cmod setf cmod
-
" Pinfo config
au BufNewFile,BufRead */etc/pinforc,*/.pinforc setf pinfo
-" Palm Resource compiler
-au BufNewFile,BufRead *.rcp setf pilrc
-
-" Pine config
-au BufNewFile,BufRead .pinerc,pinerc,.pinercex,pinercex setf pine
-
" Pip requirements
-au BufNewFile,BufRead *.pip setf requirements
-au BufNewFile,BufRead requirements.txt setf requirements
au BufNewFile,BufRead *-requirements.txt setf requirements
au BufNewFile,BufRead requirements-*.txt setf requirements
au BufNewFile,BufRead constraints.txt setf requirements
au BufNewFile,BufRead requirements/*.txt setf requirements
au BufNewFile,BufRead requires/*.txt setf requirements
-" Pipenv Pipfiles
-au BufNewFile,BufRead Pipfile setf toml
-au BufNewFile,BufRead Pipfile.lock setf json
-
-" Pixi lock
-au BufNewFile,BufRead pixi.lock setf yaml
-
" Pkl
au BufNewFile,BufRead *.pkl,*.pcf,pkl-lsp://* setf pkl
-" PL/1, PL/I
-au BufNewFile,BufRead *.pli,*.pl1 setf pli
-
-" PL/M (also: *.inp)
-au BufNewFile,BufRead *.plm,*.p36,*.pac setf plm
-
-" PL/SQL
-au BufNewFile,BufRead *.pls,*.plsql setf plsql
-
-" PLP
-au BufNewFile,BufRead *.plp setf plp
-
-" PO and PO template (GNU gettext)
-au BufNewFile,BufRead *.po,*.pot setf po
-
-" Pony
-au BufNewFile,BufRead *.pony setf pony
-
-" Postfix main config
-au BufNewFile,BufRead main.cf,main.cf.proto setf pfmain
-
-" PostScript (+ font files, encapsulated PostScript, Adobe Illustrator)
-au BufNewFile,BufRead *.ps,*.pfa,*.afm,*.eps,*.epsf,*.epsi,*.ai setf postscr
-
-" PostScript Printer Description
-au BufNewFile,BufRead *.ppd setf ppd
-
-" Povray
-au BufNewFile,BufRead *.pov setf pov
-
-" Povray configuration
-au BufNewFile,BufRead .povrayrc setf povini
-
" Povray, Pascal, PHP or assembly
au BufNewFile,BufRead *.inc call dist#ft#FTinc()
au BufNewFile,BufRead *.ps1xml setf ps1xml
au BufNewFile,BufRead *.cdxml,*.psc1 setf xml
-" Power Query M
-au BufNewFile,BufRead *.pq setf pq
-
" Printcap and Termcap
au BufNewFile,BufRead *printcap
\ let b:ptcap_type = "print" | setf ptcap
au BufNewFile,BufRead *termcap
\ let b:ptcap_type = "term" | setf ptcap
-" Prisma
-au BufRead,BufNewFile *.prisma setf prisma
-
-" PPWizard
-au BufNewFile,BufRead *.it,*.ih setf ppwiz
-
-" Pug
-au BufRead,BufNewFile *.pug setf pug
-
-" Puppet
-au BufNewFile,BufRead Puppetfile setf ruby
-
-" Embedded Puppet
-au BufNewFile,BufRead *.epp setf epuppet
-
-" Obj 3D file format
-" TODO: is there a way to avoid MS-Windows Object files?
-au BufNewFile,BufRead *.obj setf obj
-
-" Oracle Pro*C/C++
-au BufNewFile,BufRead *.pc setf proc
-
-" Privoxy actions file
-au BufNewFile,BufRead *.action setf privoxy
-
-" Procmail
-au BufNewFile,BufRead .procmail,.procmailrc setf procmail
-
" Progress or CWEB
au BufNewFile,BufRead *.w call dist#ft#FTprogress_cweb()
au BufNewFile,BufRead *.p call dist#ft#FTprogress_pascal()
" Software Distributor Product Specification File (POSIX 1387.2-1995)
-au BufNewFile,BufRead *.psf setf psf
au BufNewFile,BufRead INDEX,INFO
\ if getline(1) =~ '^\s*\(distribution\|installed_software\|root\|bundle\|product\)\s*$' |
\ setf psf |
\ endif
-" Prolog
-au BufNewFile,BufRead *.pdb setf prolog
-
-" Promela
-au BufNewFile,BufRead *.pml setf promela
-
-" Property Specification Language (PSL)
-au BufNewFile,BufRead *.psl setf psl
-
-" Google protocol buffers
-au BufNewFile,BufRead *.proto setf proto
-au BufNewFile,BufRead *.txtpb,*.textproto,*.textpb,*.pbtxt setf pbtxt
-
-" Poke
-au BufNewFile,BufRead *.pk setf poke
-
" Protocols
au BufNewFile,BufRead */etc/protocols setf protocols
-" Nvidia PTX (Parallel Thread Execution)
-" See https://docs.nvidia.com/cuda/parallel-thread-execution/
-au BufNewFile,BufRead *.ptx setf ptx
-
-" Purescript
-au BufNewFile,BufRead *.purs setf purescript
-
-" PyPA manifest files
-au BufNewFile,BufRead MANIFEST.in setf pymanifest
-
-" Pyret
-au BufNewFile,BufRead *.arr setf pyret
-
-" Pyrex/Cython
-au BufNewFile,BufRead *.pyx,*.pyx+,*.pxd,*.pxi setf pyrex
-
" Python, Python Shell Startup and Python Stub Files
" Quixote (Python-based web framework) and IPython
au BufNewFile,BufRead *.py,*.pyw,.pythonstartup,.pythonrc,.python_history,.jline-jython.history setf python
au BufNewFile,BufRead *.ipy,*.ptl,*.pyi,SConstruct setf python
-" QL
-au BufRead,BufNewFile *.ql,*.qll setf ql
-
-" QML
-au BufRead,BufNewFile *.qml,*.qbs setf qml
-
-" QMLdir
-au BufRead,BufNewFile qmldir setf qmldir
-
-" Quarto
-au BufRead,BufNewFile *.qmd setf quarto
-
-" QuickBms
-au BufRead,BufNewFile *.bms setf quickbms
-
-" Racket (formerly detected as "scheme")
-au BufNewFile,BufRead *.rkt,*.rktd,*.rktl setf racket
-
-" Radiance
-au BufNewFile,BufRead *.rad,*.mat setf radiance
-
-" Raku (formerly Perl6)
-au BufNewFile,BufRead *.pm6,*.p6,*.t6,*.pod6,*.raku,*.rakumod,*.rakudoc,*.rakutest setf raku
-
-" Ratpoison config/command files
-au BufNewFile,BufRead .ratpoisonrc,ratpoisonrc setf ratpoison
-
" RCS file
au BufNewFile,BufRead *\,v setf rcs
-" Readline
-au BufNewFile,BufRead .inputrc,inputrc setf readline
-
" Registry for MS-Windows
au BufNewFile,BufRead *.reg
\ if getline(1) =~? '^REGEDIT[0-9]*\s*$\|^Windows Registry Editor Version \d*\.\d*\s*$' | setf registry | endif
-" Renderman Interface Bytestream
-au BufNewFile,BufRead *.rib setf rib
-
-" Rego Policy Language
-au BufNewFile,BufRead *.rego setf rego
-
-" Rexx
-au BufNewFile,BufRead *.rex,*.orx,*.rxo,*.rxj,*.jrexx,*.rexxj,*.rexx,*.testGroup,*.testUnit setf rexx
-
" Ripgrep rc
au BufNewFile,BufRead {.,}ripgreprc setf conf
au BufNewFile,BufRead *.rmd,*.smd setf rmd
endif
-" R profile file
-au BufNewFile,BufRead .Rhistory,.Rprofile,Rprofile,Rprofile.site setf r
-
-" RSS looks like XML
-au BufNewFile,BufRead *.rss setf xml
-
" R reStructuredText file
if has("fname_case")
au BufNewFile,BufRead *.Rrst,*.rrst,*.Srst,*.srst setf rrst
" Remind
au BufNewFile,BufRead .reminders,*.remind,*.rem setf remind
-" ReScript
-au BufNewFile,BufRead *.res,*.resi setf rescript
-
-" Resolv.conf
-au BufNewFile,BufRead resolv.conf setf resolv
-
-" Relax NG Compact
-au BufNewFile,BufRead *.rnc setf rnc
-
-" Relax NG XML
-au BufNewFile,BufRead *.rng setf rng
-
-" ILE RPG
-au BufNewFile,BufRead *.rpgle,*.rpgleinc setf rpgle
-
-" RPL/2
-au BufNewFile,BufRead *.rpl setf rpl
-
-" Robot Framework
-au BufNewFile,BufRead *.robot,*.resource setf robot
-
-" Robots.txt
-au BufNewFile,BufRead robots.txt setf robots
-
-" Roc
-au BufNewFile,BufRead *.roc setf roc
-
-" RON (Rusty Object Notation)
-au BufNewFile,BufRead *.ron setf ron
-
-" MikroTik RouterOS script
-au BufRead,BufNewFile *.rsc setf routeros
-
-" Rpcgen
-au BufNewFile,BufRead *.x setf rpcgen
-
-" reStructuredText Documentation Format
-au BufNewFile,BufRead *.rst setf rst
-
-" RTF
-au BufNewFile,BufRead *.rtf setf rtf
-
-" Interactive Ruby shell
-au BufNewFile,BufRead .irbrc,irbrc,.irb_history,irb_history setf ruby
-
-" Ruby
-au BufNewFile,BufRead *.rb,*.rbw setf ruby
-
-" RubyGems
-au BufNewFile,BufRead *.gemspec setf ruby
-
-" RBS (Ruby Signature)
-au BufNewFile,BufRead *.rbs setf rbs
-
-" Rackup
-au BufNewFile,BufRead *.ru setf ruby
-
-" Bundler
-au BufNewFile,BufRead Gemfile setf ruby
-
-" Ruby on Rails
-au BufNewFile,BufRead *.builder,*.rxml,*.rjs setf ruby
-
" Rantfile and Rakefile is like Ruby
au BufNewFile,BufRead [rR]antfile,*.rant,[rR]akefile,*.rake setf ruby
" Rust
-au BufNewFile,BufRead *.rs setf rust
au BufNewFile,BufRead Cargo.lock,*/.cargo/config,*/.cargo/credentials setf toml
-" S-lang
-au BufNewFile,BufRead *.sl setf slang
-
-" Sage
-au BufNewFile,BufRead *.sage setf sage
-
-" Samba config
-au BufNewFile,BufRead smb.conf setf samba
-
-" SAS script
-au BufNewFile,BufRead *.sas setf sas
-
-" Sass
-au BufNewFile,BufRead *.sass setf sass
-
" Sather, TI linear assembly
au BufNewFile,BufRead *.sa call dist#ft#FTsa()
-" Scala
-au BufNewFile,BufRead *.scala,*.mill setf scala
-
-" SBT - Scala Build Tool
-au BufNewFile,BufRead *.sbt setf sbt
-
-" Slang Shading Language
-au BufNewFile,BufRead *.slang setf shaderslang
-
-" Slint
-au BufNewFile,BufRead *.slint setf slint
-
" SuperCollider
au BufNewFile,BufRead *.sc call dist#ft#FTsc()
" scdoc
au BufNewFile,BufRead *.scd call dist#ft#FTscd()
-" Scilab
-au BufNewFile,BufRead *.sci,*.sce setf scilab
-
-
-" SCSS
-au BufNewFile,BufRead *.scss setf scss
-
-" SD: Streaming Descriptors
-au BufNewFile,BufRead *.sd setf sd
-
-" SDL
-au BufNewFile,BufRead *.sdl,*.pr setf sdl
-
-" sed
-au BufNewFile,BufRead *.sed setf sed
-
-" SubRip
-au BufNewFile,BufRead *.srt setf srt
-
-" SubStation Alpha
-au BufNewFile,BufRead *.ass,*.ssa setf ssa
-
-" svelte
-au BufNewFile,BufRead *.svelte setf svelte
-
-" Sieve (RFC 3028, 5228)
-au BufNewFile,BufRead *.siv,*.sieve setf sieve
-
-" Sendmail
-au BufNewFile,BufRead sendmail.cf setf sm
" Sendmail .mc files are actually m4. Could also be MS Message text file or
" Maxima.
\ setf sgmldecl |
\ endif
-" SGML catalog file
-au BufNewFile,BufRead catalog setf catalog
-
" Shell scripts (sh, ksh, bash, bash2, csh); Allow .profile_foo etc.
" Gentoo ebuilds and Arch Linux PKGBUILDs are actually bash scripts.
" NOTE: Patterns ending in a star are further down, these have lower priority.
au BufNewFile,BufRead .bashrc,bashrc,bash.bashrc,.bash[_-]profile,.bash[_-]logout,.bash[_-]aliases,.bash[_-]history,bash-fc[-.],*.ebuild,*.bash,*.eclass,PKGBUILD,*.bats,*.cygport call dist#ft#SetFileTypeSH("bash")
au BufNewFile,BufRead .kshrc,*.ksh call dist#ft#SetFileTypeSH("ksh")
au BufNewFile,BufRead */etc/profile,.profile,*.sh,*.env{rc,} call dist#ft#SetFileTypeSH(getline(1))
-" Alpine Linux APKBUILDs are actually POSIX sh scripts with special treatment.
-au BufNewFile,BufRead APKBUILD setf apkbuild
-
" Shell script (Arch Linux) or PHP file (Drupal)
au BufNewFile,BufRead *.install
\ if getline(1) =~ '<?php' |
" (patterns ending in a start further below)
au BufNewFile,BufRead .login,.cshrc,csh.cshrc,csh.login,csh.logout,*.csh,.alias call dist#ft#CSH()
-" TriG
-au BufNewFile,BufRead *.trig setf trig
-
-" Zig and Zig Object Notation (ZON)
-au BufNewFile,BufRead *.zig,*.zon setf zig
-
-" Ziggy and Ziggy Schema
-au BufNewFile,BufRead *.ziggy setf ziggy
-au BufNewFile,BufRead *.ziggy-schema setf ziggy_schema
-
-" Zserio
-au BufNewFile,BufRead *.zs setf zserio
-
" Z-Shell script (patterns ending in a star further below)
au BufNewFile,BufRead .zprofile,*/etc/zprofile,.zfbfmarks setf zsh
au BufNewFile,BufRead .zshrc,.zshenv,.zlogin,.zlogout,.zcompdump,.zsh_history setf zsh
au BufNewFile,BufRead *.zsh,*.zsh-theme,*.zunit setf zsh
-" Salt state files
-au BufNewFile,BufRead *.sls setf salt
-
" Scheme, Supertux configuration, Lips.js history, Guile init file ("racket" patterns are now separate, see above)
au BufNewFile,BufRead *.scm,*.ss,*.sld,*.stsg,*/supertux2/config,.lips_repl_history,.guile setf scheme
-" Screen RC
-au BufNewFile,BufRead .screenrc,screenrc setf screen
-
-" Sexplib
-au BufNewFile,BufRead *.sexp setf sexplib
-
-" Simula
-au BufNewFile,BufRead *.sim setf simula
-
-" SINDA
-au BufNewFile,BufRead *.sin,*.s85 setf sinda
-
" SiSU
-au BufNewFile,BufRead *.sst,*.ssm,*.ssi,*.-sst,*._sst setf sisu
au BufNewFile,BufRead *.sst.meta,*.-sst.meta,*._sst.meta setf sisu
-" SKILL
-au BufNewFile,BufRead *.il,*.ils,*.cdf setf skill
-
-" Cadence
-au BufNewFile,BufRead *.cdc setf cdc
-
-" Cangjie
-au BufNewFile,BufRead *.cj setf cangjie
-
-" SLRN
-au BufNewFile,BufRead .slrnrc setf slrnrc
-au BufNewFile,BufRead *.score setf slrnsc
-
-" Smali
-au BufNewFile,BufRead *.smali setf smali
-
-" Smalltalk
-au BufNewFile,BufRead *.st setf st
-
" Smalltalk (and Rexx, TeX, and Visual Basic)
au BufNewFile,BufRead *.cls call dist#ft#FTcls()
-" Smarty templates
-au BufNewFile,BufRead *.tpl setf smarty
-
" SMIL or XML
au BufNewFile,BufRead *.smil
\ if getline(1) =~ '<?\s*xml.*?>' |
\ setf mib |
\ endif
-" SMITH
-au BufNewFile,BufRead *.smt,*.smith setf smith
-
-" Smithy
-au BufNewFile,BufRead *.smithy setf smithy
-
" Snakemake
au BufNewFile,BufRead Snakefile,*.smk setf snakemake
-" Snobol4 and spitbol
-au BufNewFile,BufRead *.sno,*.spt setf snobol4
-
-" SNMP MIB files
-au BufNewFile,BufRead *.mib,*.my setf mib
-
" Snort Configuration
au BufNewFile,BufRead *.hog,snort.conf,vision.conf setf hog
au BufNewFile,BufRead *.rules call dist#ft#FTRules()
-" Solidity
-au BufRead,BufNewFile *.sol setf solidity
-
-" SPARQL queries
-au BufNewFile,BufRead *.rq,*.sparql setf sparql
-
-" Spec (Linux RPM)
-au BufNewFile,BufRead *.spec setf spec
-
-" Speedup (AspenTech plant simulator)
-au BufNewFile,BufRead *.speedup,*.spdata,*.spd setf spup
-
-" Slice
-au BufNewFile,BufRead *.ice setf slice
-
-" Microsoft Visual Studio Solution
-au BufNewFile,BufRead *.sln setf solution
-au BufNewFile,BufRead *.slnf setf json
-au BufNewFile,BufRead *.slnx setf xml
-
-" Spice
-au BufNewFile,BufRead *.sp,*.spice setf spice
-
-" Spyce
-au BufNewFile,BufRead *.spy,*.spi setf spyce
-
-" Squid
-au BufNewFile,BufRead squid.conf setf squid
-
-" SQL for Oracle Designer
-au BufNewFile,BufRead *.tyb,*.tyc,*.pkb,*.pks setf sql
-
" *.typ can be either SQL or Typst files
au BufNewFile,BufRead *.typ call dist#ft#FTtyp()
au BufNewFile,BufRead *.sql call dist#ft#SQL()
au BufNewFile,BufRead .sqlite_history setf sql
-" SQLJ
-au BufNewFile,BufRead *.sqlj setf sqlj
-
-" PRQL
-au BufNewFile,BufRead *.prql setf prql
-
-" SQR
-au BufNewFile,BufRead *.sqr,*.sqi setf sqr
-
-" Squirrel
-au BufNewFile,BufRead *.nut setf squirrel
-
" OpenSSH configuration
au BufNewFile,BufRead ssh_config,*/.ssh/config,*/.ssh/*.conf setf sshconfig
au BufNewFile,BufRead */etc/ssh/ssh_config.d/*.conf setf sshconfig
" OpenSSH server configuration
-au BufNewFile,BufRead sshd_config setf sshdconfig
au BufNewFile,BufRead */etc/ssh/sshd_config.d/*.conf setf sshdconfig
-" Starlark
-au BufNewFile,BufRead *.ipd,*.star,*.starlark setf starlark
-
" OpenVPN configuration
-au BufNewFile,BufRead *.ovpn setf openvpn
au BufNewFile,BufRead */openvpn/*/*.conf setf openvpn
" Stata
-au BufNewFile,BufRead *.ado,*.do,*.imata,*.mata setf stata
" Also *.class, but not when it's a Java bytecode file
au BufNewFile,BufRead *.class
\ if getline(1) !~ "^\xca\xfe\xba\xbe" | setf stata | endif
-" SMCL
-au BufNewFile,BufRead *.hlp,*.ihlp,*.smcl setf smcl
-
" SPA JSON
au BufNewFile,BufRead */pipewire/*.conf setf spajson
au BufNewFile,BufRead */wireplumber/*.conf setf spajson
-" Stored Procedures
-au BufNewFile,BufRead *.stp setf stp
-
-" Standard ML
-au BufNewFile,BufRead *.sml setf sml
-
-" Sratus VOS command macro
-au BufNewFile,BufRead *.cm setf voscm
-
-" Sway (programming language)
-au BufNewFile,BufRead *.sw setf sway
-
" Swift
-au BufNewFile,BufRead *.swift,*.swiftinterface setf swift
au BufNewFile,BufRead *.swift.gyb setf swiftgyb
" Swift Intermediate Language or SILE
au BufNewFile,BufRead *.sil call dist#ft#FTsil()
-" Swig
-au BufNewFile,BufRead *.swg,*.swig setf swig
-
" Sysctl
au BufNewFile,BufRead */etc/sysctl.conf,*/etc/sysctl.d/*.conf setf sysctl
au BufNewFile,BufRead */.config/systemd/user/*.d/.#* setf systemd
au BufNewFile,BufRead */.config/systemd/user/.#* setf systemd
-" Synopsys Design Constraints
-au BufNewFile,BufRead *.sdc setf sdc
-
" Sudoers
au BufNewFile,BufRead */etc/sudoers,sudoers.tmp setf sudoers
-" SVG (Scalable Vector Graphics)
-au BufNewFile,BufRead *.svg setf svg
-
-" Surface
-au BufRead,BufNewFile *.sface setf surface
-
-" SysML
-au BufNewFile,BufReadPost *.sysml setf sysml
-
-" LLVM TableGen
-au BufNewFile,BufRead *.td setf tablegen
-
" Tads (or Nroff or Perl test file)
au BufNewFile,BufRead *.t
\ if !dist#ft#FTnroff() && !dist#ft#FTperl() | setf tads | endif
-" Tags
-au BufNewFile,BufRead tags setf tags
-
-" TAK
-au BufNewFile,BufRead *.tak setf tak
-
-" Unx Tal
-au BufNewFile,BufRead *.tal setf tal
-
" Task
-au BufRead,BufNewFile {pending,completed,undo}.data setf taskdata
-au BufRead,BufNewFile *.task setf taskedit
+au BufNewFile,BufRead {pending,completed,undo}.data setf taskdata
+au BufNewFile,BufRead *.task setf taskedit
" Tcl (JACL too)
au BufNewFile,BufRead *.tcl,*.tm,*.tk,*.itcl,*.itk,*.jacl,.tclshrc,.wishrc,.tclsh-history setf tcl
-" Xilinx's xsct and xsdb use tcl
-au BufNewFile,BufRead .xsctcmdhistory,.xsdbcmdhistory setf tcl
-
-" templ
-au BufNewFile,BufRead *.templ setf templ
-
-" Teal
-au BufRead,BufNewFile *.tl setf teal
-
-" TealInfo
-au BufNewFile,BufRead *.tli setf tli
-
-" Telix Salt
-au BufNewFile,BufRead *.slt setf tsalt
-
" Tera Term Language or Turtle
-au BufRead,BufNewFile *.ttl
+au BufNewFile,BufRead *.ttl
\ if getline(1) =~ '^@\?\(prefix\|base\)' |
\ setf turtle |
\ else |
\ setf teraterm |
\ endif
-" Terminfo
-au BufNewFile,BufRead *.ti setf terminfo
-
-" Tera
-au BufRead,BufNewFile *.tera setf tera
-
-" Terraform variables
-au BufRead,BufNewFile *.tfvars setf terraform-vars
-
" TeX
-au BufNewFile,BufRead *.latex,*.sty,*.dtx,*.ltx,*.bbl setf tex
au BufNewFile,BufRead *.tex call dist#ft#FTtex()
au BufNewFile,BufRead texdoc.cnf setf conf
" Sometime we need to view its content for debugging
au BufNewFile,BufRead *.{pgf,nlo,nls,thm,eps_tex,pygtex,pygstyle,clo,aux,brf,ind,lof,loe,nav,vrb,ins,tikz,bbx,cbx,beamer} setf tex
-" LaTeX files generated by Inkscape
-au BufNewFile,BufRead *.pdf_tex setf tex
-
-" ConTeXt
-au BufNewFile,BufRead *.mkii,*.mkiv,*.mkvi,*.mkxl,*.mklx setf context
-
-" Texinfo
-au BufNewFile,BufRead *.texinfo,*.texi,*.txi setf texinfo
-
-" TeX configuration
-au BufNewFile,BufRead texmf.cnf setf texmf
-
-" Thrift (Apache)
-au BufNewFile,BufRead *.thrift setf thrift
-
-" Tidy config
-au BufNewFile,BufRead .tidyrc,tidyrc,tidy.conf setf tidy
-
-" TF (TinyFugue) mud client
-au BufNewFile,BufRead .tfrc,tfrc setf tf
-
" TF (TinyFugue) mud client or terraform
au BufNewFile,BufRead *.tf call dist#ft#FTtf()
-" TLA+
-au BufNewFile,BufRead *.tla setf tla
-
" tmux configuration
au BufNewFile,BufRead {.,}tmux*.conf setf tmux
" TOML
au BufNewFile,BufRead *.toml,uv.lock setf toml
-" TPP - Text Presentation Program
-au BufNewFile,BufRead *.tpp setf tpp
-
-" TRACE32 Script Language
-au BufNewFile,BufRead *.cmm,*.cmmt,*.t32 setf trace32
-
-" Treetop
-au BufRead,BufNewFile *.treetop setf treetop
-
-" Trustees
-au BufNewFile,BufRead trustees.conf setf trustees
-
-" TSS - Geometry
-au BufNewFile,BufReadPost *.tssgm setf tssgm
-
-" TSS - Optics
-au BufNewFile,BufReadPost *.tssop setf tssop
-
-" TSS - Command Line (temporary)
-au BufNewFile,BufReadPost *.tsscl setf tsscl
-
-" TSV Files
-au BufNewFile,BufRead *.tsv setf tsv
-
-" Tutor mode
-au BufNewFile,BufReadPost *.tutor setf tutor
-
-" TWIG files
-au BufNewFile,BufReadPost *.twig setf twig
-
" TypeScript or Qt translation file (which is XML)
-au BufNewFile,BufReadPost *.ts
+au BufNewFile,BufRead *.ts
\ if getline(1) =~ '<?xml' |
\ setf xml |
\ else |
\ endif
au BufNewFile,BufRead .ts_node_repl_history setf typescript
-" TypeScript module and common
-au BufNewFile,BufRead *.mts,*.cts setf typescript
-
-" TypeScript with React
-au BufNewFile,BufRead *.tsx setf typescriptreact
-
-" TypeSpec files
-au BufNewFile,BufRead *.tsp setf typespec
-
-" Motif UIT/UIL files
-au BufNewFile,BufRead *.uit,*.uil setf uil
-
" Udev conf
au BufNewFile,BufRead */etc/udev/udev.conf setf udevconf
" Udev symlinks config
au BufNewFile,BufRead */etc/udev/cdsymlinks.conf setf sh
-" Ungrammar, AKA Un-grammar
-au BufNewFile,BufRead *.ungram setf ungrammar
-
-" UnrealScript
-au BufNewFile,BufRead *.uc setf uc
-
" Updatedb
au BufNewFile,BufRead */etc/updatedb.conf setf updatedb
au BufNewFile,BufRead */.config/upstart/*.conf setf upstart
au BufNewFile,BufRead */.config/upstart/*.override setf upstart
-" URL shortcut
-au BufNewFile,BufRead *.url setf urlshortcut
-
-" V
-au BufNewFile,BufRead *.vsh,*.vv setf v
-
-" Vala
-au BufNewFile,BufRead *.vala setf vala
-
-" VDF
-au BufNewFile,BufRead *.vdf setf vdf
-
-" VDM
-au BufRead,BufNewFile *.vdmpp,*.vpp setf vdmpp
-au BufRead,BufNewFile *.vdmrt setf vdmrt
-au BufRead,BufNewFile *.vdmsl,*.vdm setf vdmsl
-
-" Vento
-au BufNewFile,BufRead *.vto setf vento
-
-" Vera
-au BufNewFile,BufRead *.vr,*.vri,*.vrh setf vera
-
-" Vagrant (uses Ruby syntax)
-au BufNewFile,BufRead Vagrantfile setf ruby
-
" Verilog HDL, V or Coq
au BufNewFile,BufRead *.v call dist#ft#FTv()
-" Verilog-AMS HDL
-au BufNewFile,BufRead *.va,*.vams setf verilogams
-
-" SystemVerilog
-au BufNewFile,BufRead *.sv,*.svh setf systemverilog
-
-" VHS tape
-" .tape is also used by TapeCalc, which we do not support ATM. If TapeCalc
-" support is needed the contents of the file needs to be inspected.
-au BufNewFile,BufRead *.tape setf vhs
-
-" VHDL
-au BufNewFile,BufRead *.hdl,*.vhd,*.vhdl,*.vbe,*.vst,*.vho setf vhdl
-
" Vim script
au BufNewFile,BufRead *.vim,.exrc,_exrc,.netrwhist setf vim
-" Viminfo file
-au BufNewFile,BufRead .viminfo,_viminfo setf viminfo
-
" Virata Config Script File or Drupal module
-au BufRead,BufNewFile *.hw,*.module,*.pkg
+au BufNewFile,BufRead *.hw,*.module,*.pkg
\ if getline(1) =~ '<?php' |
\ setf php |
\ else |
" Visual Basic or FORM
au BufNewFile,BufRead *.frm call dist#ft#FTfrm()
-" Visual Basic
-" user control, ActiveX document form, active designer, property page
-au BufNewFile,BufRead *.ctl,*.dob,*.dsr,*.pag setf vb
-
" Visual Basic or Vimball Archiver
au BufNewFile,BufRead *.vba call dist#ft#FTvba()
-" Visual Basic Project
-au BufNewFile,BufRead *.vbp setf dosini
-
-" VBScript (close to Visual Basic)
-au BufNewFile,BufRead *.vbs setf vb
-
-" Visual Basic .NET (close to Visual Basic)
-au BufNewFile,BufRead *.vb setf vb
-
-" Visual Studio Macro
-au BufNewFile,BufRead *.dsm setf vb
-
-" SaxBasic (close to Visual Basic)
-au BufNewFile,BufRead *.sba setf vb
-
-" Vgrindefs file
-au BufNewFile,BufRead vgrindefs setf vgrindefs
-
-" VRML V1.0c
-au BufNewFile,BufRead *.wrl setf vrml
-
-" Vroom (vim testing and executable documentation)
-au BufNewFile,BufRead *.vroom setf vroom
-
-" Vue.js Single File Component
-au BufNewFile,BufRead *.vue setf vue
-
" Waybar config
au BufNewFile,BufRead */waybar/config setf jsonc
-" WebAssembly
-au BufNewFile,BufRead *.wat,*.wast setf wat
-
-" WebAssembly Interface Type (WIT)
-au BufNewFile,BufRead *.wit setf wit
-
-" Webmacro
-au BufNewFile,BufRead *.wm setf webmacro
-
-" Wget config
-au BufNewFile,BufRead .wgetrc,wgetrc setf wget
-
-" Wget2 config
-au BufNewFile,BufRead .wget2rc,wget2rc setf wget2
-
-" WebGPU Shading Language (WGSL)
-au BufNewFile,BufRead *.wgsl setf wgsl
-
-" Website MetaLanguage
-au BufNewFile,BufRead *.wml setf wml
-
-" Winbatch
-au BufNewFile,BufRead *.wbt setf winbatch
-
-" WSML
-au BufNewFile,BufRead *.wsml setf wsml
-
-" WPL
-au BufNewFile,BufRead *.wpl setf xml
-
-" WvDial
-au BufNewFile,BufRead wvdial.conf,.wvdialrc setf wvdial
-
-" CVS RC file
-au BufNewFile,BufRead .cvsrc setf cvsrc
-
" CVS commit file
au BufNewFile,BufRead cvs\d\+ setf cvs
" Xdg-user-dirs
au BufNewFile,BufRead user-dirs.dirs,user-dirs.defaults setf sh
-" XHTML
-au BufNewFile,BufRead *.xhtml,*.xht setf xhtml
-
-" X11vnc
-au BufNewFile,BufRead .x11vncrc setf conf
-
-" Xprofile
-au BufNewFile,BufRead .xprofile setf sh
-
" X Pixmap (dynamically sets colors, this used to trigger on BufEnter to make
" it work better, but that breaks setting 'filetype' manually)
au BufNewFile,BufRead *.xpm
" Xinetd conf
au BufNewFile,BufRead */etc/xinetd.conf setf xinetd
-" Xilinx Vivado/Vitis project files and block design files
-au BufNewFile,BufRead *.xpr,*.xpfm,*.spfm,*.bxml,*.mmi setf xml
-au BufNewFile,BufRead *.bd,*.bda,*.xci setf json
-au BufNewFile,BufRead *.mss setf mss
-
-" XS Perl extension interface language
-au BufNewFile,BufRead *.xs setf xs
-
-" X compose file
-au BufNewFile,BufRead .XCompose,Compose setf xcompose
-
" X resources file
au BufNewFile,BufRead .Xdefaults,.Xpdefaults,.Xresources,xdm-config,*.ad setf xdefaults
" Xmath
-au BufNewFile,BufRead *.msc,*.msf setf xmath
au BufNewFile,BufRead *.ms
\ if !dist#ft#FTnroff() | setf xmath | endif
" XML specific variants: docbk and xbl
au BufNewFile,BufRead *.xml call dist#ft#FTxml()
-" XMI (holding UML models) is also XML
-au BufNewFile,BufRead *.xmi setf xml
-
" CSPROJ files are Visual Studio.NET's XML-based C# project config files
au BufNewFile,BufRead *.csproj,*.csproj.user setf xml
" VBPROJ files are Visual Studio.NET's XML-based Visual Basic project config files
au BufNewFile,BufRead *.vbproj,*.vbproj.user setf xml
-" MSBUILD configuration files are also XML
-au BufNewFile,BufRead Directory.Packages.props,Directory.Build.targets,Directory.Build.props setf xml
-
-" Unison Language
-au BufNewFile,BufRead *.u,*.uu setf unison
-
-" Qt Linguist translation source and Qt User Interface Files are XML
-" However, for .ts TypeScript is more common.
-au BufNewFile,BufRead *.ui setf xml
-
-" TPM's are RDF-based descriptions of TeX packages (Nikolai Weibull)
-au BufNewFile,BufRead *.tpm setf xml
-
" Xdg menus
au BufNewFile,BufRead */etc/xdg/menus/*.menu setf xml
-" ATI graphics driver configuration
-au BufNewFile,BufRead fglrxrc setf xml
-
-" Web Services Description Language (WSDL)
-au BufNewFile,BufRead *.wsdl setf xml
-
-" Workflow Description Language (WDL)
-au BufNewFile,BufRead *.wdl setf wdl
-
-" XLIFF (XML Localisation Interchange File Format) is also XML
-au BufNewFile,BufRead *.xlf setf xml
-au BufNewFile,BufRead *.xliff setf xml
-
-" XML User Interface Language
-au BufNewFile,BufRead *.xul setf xml
-
" X11 xmodmap (also see below)
au BufNewFile,BufRead *Xmodmap setf xmodmap
-" Xquery
-au BufNewFile,BufRead *.xq,*.xql,*.xqm,*.xquery,*.xqy setf xquery
-
-" XSD
-au BufNewFile,BufRead *.xsd setf xsd
-
-" Xslt
-au BufNewFile,BufRead *.xsl,*.xslt setf xslt
-
-" Yacc
-au BufNewFile,BufRead *.yy,*.yxx,*.y++ setf yacc
-
" Yacc or racc
au BufNewFile,BufRead *.y call dist#ft#FTy()
" Yaml
-au BufNewFile,BufRead *.yaml,*.yml,*.eyaml setf yaml
au BufNewFile,BufRead */.kube/config,*/.kube/kuberc setf yaml
-" Raml
-au BufNewFile,BufRead *.raml setf raml
-
" yum conf (close enough to dosini)
au BufNewFile,BufRead */etc/yum.conf setf dosini
-" YANG
-au BufRead,BufNewFile *.yang setf yang
-
-" Yuck
-au BufNewFile,BufRead *.yuck setf yuck
-
" Zimbu
-au BufNewFile,BufRead *.zu setf zimbu
-" Zimbu Templates
-au BufNewFile,BufRead *.zut setf zimbutempl
-
" Zope
" dtml (zope dynamic template markup language), pt (zope page template),
" cpt (zope form controller page template)
" zsql (zope sql method)
au BufNewFile,BufRead *.zsql call dist#ft#SQL()
-" Z80 assembler asz80
-au BufNewFile,BufRead *.z8a setf z8a
-
+" Detect by extention
+au BufNewFile,BufRead * call dist#ft#DetectFromExt()
augroup END
au BufNewFile,BufRead .neomuttrc*,*/.neomutt/neomuttrc* call s:StarSetf('neomuttrc')
au BufNewFile,BufRead neomuttrc*,Neomuttrc* call s:StarSetf('neomuttrc')
-" Nfs
-au BufNewFile,BufRead nfs.conf,nfsmount.conf setf dosini
-
" Nginx
au BufNewFile,BufRead */etc/nginx/*,*/usr/local/nginx/conf/* call s:StarSetf('nginx')
" ReDIF
" Only used when the .rdf file was not detected to be XML.
-au BufRead,BufNewFile *.rdf call dist#ft#Redif()
+au BufNewFile,BufRead *.rdf call dist#ft#Redif()
" Remind
au BufNewFile,BufRead .reminders* call s:StarSetf('remind')
" SGML catalog file
au BufNewFile,BufRead sgml.catalog* call s:StarSetf('catalog')
-" Stylus
-au BufNewFile,BufReadPost *.styl,*.stylus setf stylus
-
" avoid doc files being recognized a shell files
au BufNewFile,BufRead */doc/{,.}bash[_-]completion{,.d,.sh}{,/*} setf text
" tmux configuration with arbitrary extension
au BufNewFile,BufRead {.,}tmux*.conf* call s:StarSetf('tmux')
-" Universal Scene Description
-au BufNewFile,BufRead *.usda,*.usd setf usd
-
" UCI
" UCI files are normally in /etc/config, but that might be mounted over sshfs or similar, so we match more loosely.
" There was some concern[1] that this pattern would match too much, so now we check the file content as well.
" yum conf (close enough to dosini)
au BufNewFile,BufRead */etc/yum.repos.d/* call s:StarSetf('dosini')
-" Yarn lock
-au BufNewFile,BufRead yarn.lock setf yaml
-
-" Zathurarc
-au BufNewFile,BufRead zathurarc setf zathurarc
-
-" Rofi stylesheet
-au BufNewFile,BufRead *.rasi setf rasi
-
" Z-Shell script ending in a star
au BufNewFile,BufRead .zsh*,.zlog*,.zcompdump* call s:StarSetf('zsh')
au BufNewFile,BufRead zsh*,zlog* call s:StarSetf('zsh')
-" Zsh module
-" mdd: https://github.com/zsh-users/zsh/blob/57248b88830ce56adc243a40c7773fb3825cab34/Etc/zsh-development-guide#L285-L288
-" mdh, pro: https://github.com/zsh-users/zsh/blob/57248b88830ce56adc243a40c7773fb3825cab34/Etc/zsh-development-guide#L268-L271
-" *.mdd will generate *.mdh, *.pro and *.epro.
-" module's *.c will #include *.mdh containing module dependency information and
-" *.pro containing all static declarations of *.c
-" *.epro contains all external declarations of *.c
-au BufNewFile,BufRead *.mdh,*.epro setf c
-au BufNewFile,BufRead *.mdd setf sh
-
" Help files match *.txt but should have a last line that is a modeline.
au BufNewFile,BufRead *.txt
\ if getline('$') !~ 'vim:.*ft=help'
\| setf text
\| endif
-" Blueprint markup files
-au BufNewFile,BufRead *.blp setf blueprint
-" Blueprint build system file
-au BufNewFile,BufRead *.bp setf bp
" Generic log file
" Disabled cause it is too distracting
projects / thirdparty / vim.git / commitdiff
