]> git.ipfire.org Git - thirdparty/kernel/linux.git/commitdiff
hwmon: (pmbus/tps25990) Add initial support
authorJerome Brunet <jbrunet@baylibre.com>
Mon, 2 Dec 2024 10:28:02 +0000 (11:28 +0100)
committerGuenter Roeck <linux@roeck-us.net>
Sat, 14 Dec 2024 16:00:44 +0000 (08:00 -0800)
Add initial support for the Texas Instruments TPS25990 eFuse.
This adds the basic PMBUS telemetry support for the device.

From Karol Przybylski:
  The tps25990_read_word_data function contains a block of unreachable code
  caused by the syntactic structure in the PMBUS_VIRT_READ_IIN_MAX case.

  Specifically, the return TPS25990_READ_IIN_PEAK; statement immediately
  exits the function, making the next lines unreachable.

  This patch removes the return statement, leaving the expected handling.
  Discovered in coverity: CID 1602227

Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[groeck: Adjust to MODULE_IMPORT_NS API change]
[karprzy7@gmail.com: Fix unreachable code in tps25990_read_word_data]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Documentation/hwmon/index.rst
Documentation/hwmon/tps25990.rst [new file with mode: 0644]
MAINTAINERS
drivers/hwmon/pmbus/Kconfig
drivers/hwmon/pmbus/Makefile
drivers/hwmon/pmbus/tps25990.c [new file with mode: 0644]

index 55f1111594b2e9ada4a881e5d4d8884f33256d1f..1a3cb0a59f7210b8a5e972a8015658b983834cd2 100644 (file)
@@ -236,6 +236,7 @@ Hardware Monitoring Kernel Drivers
    tmp464
    tmp513
    tps23861
+   tps25990
    tps40422
    tps53679
    tps546d24
diff --git a/Documentation/hwmon/tps25990.rst b/Documentation/hwmon/tps25990.rst
new file mode 100644 (file)
index 0000000..04faec7
--- /dev/null
@@ -0,0 +1,147 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver tps25990
+======================
+
+Supported chips:
+
+  * TI TPS25990
+
+    Prefix: 'tps25990'
+
+  * Datasheet
+
+    Publicly available at Texas Instruments website: https://www.ti.com/lit/gpn/tps25990
+
+Author:
+
+       Jerome Brunet <jbrunet@baylibre.com>
+
+Description
+-----------
+
+This driver implements support for TI TPS25990 eFuse.
+This is an integrated, high-current circuit protection and power
+management device with PMBUS interface
+
+Device compliant with:
+
+- PMBus rev 1.3 interface.
+
+Device supports direct format for reading input voltages,
+output voltage, input current, input power and temperature.
+
+Due to the specificities of the chip, all history reset attributes
+are tied together. Resetting the history of a sensor, resets the
+history of all the sensors.
+
+The driver exports the following attributes via the 'sysfs' files
+for input current:
+
+**curr1_average**
+
+**curr1_crit**
+
+**curr1_crit_alarm**
+
+**curr1_highest**
+
+**curr1_input**
+
+**curr1_label**
+
+**curr1_max**
+
+**curr1_max_alarm**
+
+**curr1_reset_history**
+
+The driver provides the following attributes for main input voltage:
+
+**in1_average**
+
+**in1_crit**
+
+**in1_crit_alarm**
+
+**in1_highest**
+
+**in1_input**
+
+**in1_label**
+
+**in1_lcrit**
+
+**in1_lcrit_alarm**
+
+**in1_lowest**
+
+**in1_max**
+
+**in1_max_alarm**
+
+**in1_min**
+
+**in1_min_alarm**
+
+**in1_reset_history**
+
+The driver provides the following attributes for auxiliary input voltage:
+
+**in2_input**
+
+**in2_label**
+
+The driver provides the following attributes for output voltage:
+
+**in3_average**
+
+**in3_input**
+
+**in3_label**
+
+**in3_lowest**
+
+**in3_min**
+
+**in3_min_alarm**
+
+**in3_reset_history**
+
+The driver provides the following attributes for input power:
+
+**power1_alarm**
+
+**power1_average**
+
+**power1_input**
+
+**power1_input_highest**
+
+**power1_label**
+
+**power1_max**
+
+**power1_reset_history**
+
+The driver provides the following attributes for temperature:
+
+**temp1_average**
+
+**temp1_crit**
+
+**temp1_crit_alarm**
+
+**temp1_highest**
+
+**temp1_input**
+
+**temp1_max**
+
+**temp1_max_alarm**
+
+**temp1_reset_history**
+
+The driver provides the following attributes for sampling:
+
+**samples**
index 74f8353c629f1ec95ca310608af6b48832372309..114d4f4960e95b9f5b84b8d6a8d74b6bfd372e2b 100644 (file)
@@ -23218,6 +23218,8 @@ M:      Jerome Brunet <jbrunet@baylibre.com>
 L:     linux-hwmon@vger.kernel.org
 S:     Maintained
 F:     Documentation/devicetree/bindings/hwmon/pmbus/ti,tps25990.yaml
+F:     Documentation/hwmon/tps25990.rst
+F:     drivers/hwmon/pmbus/tps25990.c
 
 TEXAS INSTRUMENTS TPS23861 PoE PSE DRIVER
 M:     Robert Marko <robert.marko@sartura.hr>
index f6d3528419536a68011d67a4a239c0cba1bbf475..22418a05ced0c4d7025a243134f231c54c741371 100644 (file)
@@ -510,6 +510,23 @@ config SENSORS_TDA38640_REGULATOR
          If you say yes here you get regulator support for Infineon
          TDA38640 as regulator.
 
+config SENSORS_TPS25990
+       tristate "TI TPS25990"
+       help
+         If you say yes here you get hardware monitoring support for TI
+         TPS25990.
+
+         This driver can also be built as a module. If so, the module will
+         be called tps25990.
+
+config SENSORS_TPS25990_REGULATOR
+       bool "Regulator support for TPS25990 and compatibles"
+       depends on SENSORS_TPS25990 && REGULATOR
+       default SENSORS_TPS25990
+       help
+         If you say yes here you get regulator support for Texas Instruments
+         TPS25990.
+
 config SENSORS_TPS40422
        tristate "TI TPS40422"
        help
index d00bcc758b97200b80158e33b0ac41e6e5ac3231..3d3183f8d2a7060eb513f54f4f0a78ba37c09393 100644 (file)
@@ -51,6 +51,7 @@ obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o
 obj-$(CONFIG_SENSORS_Q54SJ108A2)       += q54sj108a2.o
 obj-$(CONFIG_SENSORS_STPDDC60) += stpddc60.o
 obj-$(CONFIG_SENSORS_TDA38640) += tda38640.o
+obj-$(CONFIG_SENSORS_TPS25990) += tps25990.o
 obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o
 obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
 obj-$(CONFIG_SENSORS_TPS546D24)        += tps546d24.o
diff --git a/drivers/hwmon/pmbus/tps25990.c b/drivers/hwmon/pmbus/tps25990.c
new file mode 100644 (file)
index 0000000..0d2655e
--- /dev/null
@@ -0,0 +1,436 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2024 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet@baylibre.com>
+
+#include <linux/bitfield.h>
+#include <linux/debugfs.h>
+#include <linux/err.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "pmbus.h"
+
+#define TPS25990_READ_VAUX             0xd0
+#define TPS25990_READ_VIN_MIN          0xd1
+#define TPS25990_READ_VIN_PEAK         0xd2
+#define TPS25990_READ_IIN_PEAK         0xd4
+#define TPS25990_READ_PIN_PEAK         0xd5
+#define TPS25990_READ_TEMP_AVG         0xd6
+#define TPS25990_READ_TEMP_PEAK                0xd7
+#define TPS25990_READ_VOUT_MIN         0xda
+#define TPS25990_READ_VIN_AVG          0xdc
+#define TPS25990_READ_VOUT_AVG         0xdd
+#define TPS25990_READ_IIN_AVG          0xde
+#define TPS25990_READ_PIN_AVG          0xdf
+#define TPS25990_VIREF                 0xe0
+#define TPS25990_PK_MIN_AVG            0xea
+#define  PK_MIN_AVG_RST_PEAK           BIT(7)
+#define  PK_MIN_AVG_RST_AVG            BIT(6)
+#define  PK_MIN_AVG_RST_MIN            BIT(5)
+#define  PK_MIN_AVG_AVG_CNT            GENMASK(2, 0)
+#define TPS25990_MFR_WRITE_PROTECT     0xf8
+#define  TPS25990_UNLOCKED             BIT(7)
+
+#define TPS25990_8B_SHIFT              2
+#define TPS25990_VIN_OVF_NUM           525100
+#define TPS25990_VIN_OVF_DIV           10163
+#define TPS25990_VIN_OVF_OFF           155
+#define TPS25990_IIN_OCF_NUM           953800
+#define TPS25990_IIN_OCF_DIV           129278
+#define TPS25990_IIN_OCF_OFF           157
+
+#define PK_MIN_AVG_RST_MASK            (PK_MIN_AVG_RST_PEAK | \
+                                        PK_MIN_AVG_RST_AVG  | \
+                                        PK_MIN_AVG_RST_MIN)
+
+/*
+ * Arbitrary default Rimon value: 1kOhm
+ * This correspond to an overcurrent limit of 55A, close to the specified limit
+ * of un-stacked TPS25990 and makes further calculation easier to setup in
+ * sensor.conf, if necessary
+ */
+#define TPS25990_DEFAULT_RIMON         1000000000
+
+static void tps25990_set_m(int *m, u32 rimon)
+{
+       u64 val = ((u64)*m) * rimon;
+
+       /* Make sure m fits the s32 type */
+       *m = DIV_ROUND_CLOSEST_ULL(val, 1000000);
+}
+
+static int tps25990_mfr_write_protect_set(struct i2c_client *client,
+                                         u8 protect)
+{
+       u8 val;
+
+       switch (protect) {
+       case 0:
+               val = 0xa2;
+               break;
+       case PB_WP_ALL:
+               val = 0x0;
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       return pmbus_write_byte_data(client, -1, TPS25990_MFR_WRITE_PROTECT,
+                                    val);
+}
+
+static int tps25990_mfr_write_protect_get(struct i2c_client *client)
+{
+       int ret = pmbus_read_byte_data(client, -1, TPS25990_MFR_WRITE_PROTECT);
+
+       if (ret < 0)
+               return ret;
+
+       return (ret & TPS25990_UNLOCKED) ? 0 : PB_WP_ALL;
+}
+
+static int tps25990_read_word_data(struct i2c_client *client,
+                                  int page, int phase, int reg)
+{
+       int ret;
+
+       switch (reg) {
+       case PMBUS_VIRT_READ_VIN_MAX:
+               ret = pmbus_read_word_data(client, page, phase,
+                                          TPS25990_READ_VIN_PEAK);
+               break;
+
+       case PMBUS_VIRT_READ_VIN_MIN:
+               ret = pmbus_read_word_data(client, page, phase,
+                                          TPS25990_READ_VIN_MIN);
+               break;
+
+       case PMBUS_VIRT_READ_VIN_AVG:
+               ret = pmbus_read_word_data(client, page, phase,
+                                          TPS25990_READ_VIN_AVG);
+               break;
+
+       case PMBUS_VIRT_READ_VOUT_MIN:
+               ret = pmbus_read_word_data(client, page, phase,
+                                          TPS25990_READ_VOUT_MIN);
+               break;
+
+       case PMBUS_VIRT_READ_VOUT_AVG:
+               ret = pmbus_read_word_data(client, page, phase,
+                                          TPS25990_READ_VOUT_AVG);
+               break;
+
+       case PMBUS_VIRT_READ_IIN_AVG:
+               ret = pmbus_read_word_data(client, page, phase,
+                                          TPS25990_READ_IIN_AVG);
+               break;
+
+       case PMBUS_VIRT_READ_IIN_MAX:
+               ret = pmbus_read_word_data(client, page, phase,
+                                          TPS25990_READ_IIN_PEAK);
+               break;
+
+       case PMBUS_VIRT_READ_TEMP_AVG:
+               ret = pmbus_read_word_data(client, page, phase,
+                                          TPS25990_READ_TEMP_AVG);
+               break;
+
+       case PMBUS_VIRT_READ_TEMP_MAX:
+               ret = pmbus_read_word_data(client, page, phase,
+                                          TPS25990_READ_TEMP_PEAK);
+               break;
+
+       case PMBUS_VIRT_READ_PIN_AVG:
+               ret = pmbus_read_word_data(client, page, phase,
+                                          TPS25990_READ_PIN_AVG);
+               break;
+
+       case PMBUS_VIRT_READ_PIN_MAX:
+               ret = pmbus_read_word_data(client, page, phase,
+                                          TPS25990_READ_PIN_PEAK);
+               break;
+
+       case PMBUS_VIRT_READ_VMON:
+               ret = pmbus_read_word_data(client, page, phase,
+                                          TPS25990_READ_VAUX);
+               break;
+
+       case PMBUS_VIN_UV_WARN_LIMIT:
+       case PMBUS_VIN_UV_FAULT_LIMIT:
+       case PMBUS_VIN_OV_WARN_LIMIT:
+       case PMBUS_VOUT_UV_WARN_LIMIT:
+       case PMBUS_IIN_OC_WARN_LIMIT:
+       case PMBUS_OT_WARN_LIMIT:
+       case PMBUS_OT_FAULT_LIMIT:
+       case PMBUS_PIN_OP_WARN_LIMIT:
+               /*
+                * These registers provide an 8 bits value instead of a
+                * 10bits one. Just shifting twice the register value is
+                * enough to make the sensor type conversion work, even
+                * if the datasheet provides different m, b and R for
+                * those.
+                */
+               ret = pmbus_read_word_data(client, page, phase, reg);
+               if (ret < 0)
+                       break;
+               ret <<= TPS25990_8B_SHIFT;
+               break;
+
+       case PMBUS_VIN_OV_FAULT_LIMIT:
+               ret = pmbus_read_word_data(client, page, phase, reg);
+               if (ret < 0)
+                       break;
+               ret = DIV_ROUND_CLOSEST(ret * TPS25990_VIN_OVF_NUM,
+                                       TPS25990_VIN_OVF_DIV);
+               ret += TPS25990_VIN_OVF_OFF;
+               break;
+
+       case PMBUS_IIN_OC_FAULT_LIMIT:
+               /*
+                * VIREF directly sets the over-current limit at which the eFuse
+                * will turn the FET off and trigger a fault. Expose it through
+                * this generic property instead of a manufacturer specific one.
+                */
+               ret = pmbus_read_byte_data(client, page, TPS25990_VIREF);
+               if (ret < 0)
+                       break;
+               ret = DIV_ROUND_CLOSEST(ret * TPS25990_IIN_OCF_NUM,
+                                       TPS25990_IIN_OCF_DIV);
+               ret += TPS25990_IIN_OCF_OFF;
+               break;
+
+       case PMBUS_VIRT_SAMPLES:
+               ret = pmbus_read_byte_data(client, page, TPS25990_PK_MIN_AVG);
+               if (ret < 0)
+                       break;
+               ret = 1 << FIELD_GET(PK_MIN_AVG_AVG_CNT, ret);
+               break;
+
+       case PMBUS_VIRT_RESET_TEMP_HISTORY:
+       case PMBUS_VIRT_RESET_VIN_HISTORY:
+       case PMBUS_VIRT_RESET_IIN_HISTORY:
+       case PMBUS_VIRT_RESET_PIN_HISTORY:
+       case PMBUS_VIRT_RESET_VOUT_HISTORY:
+               ret = 0;
+               break;
+
+       default:
+               ret = -ENODATA;
+               break;
+       }
+
+       return ret;
+}
+
+static int tps25990_write_word_data(struct i2c_client *client,
+                                   int page, int reg, u16 value)
+{
+       int ret;
+
+       switch (reg) {
+       case PMBUS_VIN_UV_WARN_LIMIT:
+       case PMBUS_VIN_UV_FAULT_LIMIT:
+       case PMBUS_VIN_OV_WARN_LIMIT:
+       case PMBUS_VOUT_UV_WARN_LIMIT:
+       case PMBUS_IIN_OC_WARN_LIMIT:
+       case PMBUS_OT_WARN_LIMIT:
+       case PMBUS_OT_FAULT_LIMIT:
+       case PMBUS_PIN_OP_WARN_LIMIT:
+               value >>= TPS25990_8B_SHIFT;
+               value = clamp_val(value, 0, 0xff);
+               ret = pmbus_write_word_data(client, page, reg, value);
+               break;
+
+       case PMBUS_VIN_OV_FAULT_LIMIT:
+               value -= TPS25990_VIN_OVF_OFF;
+               value = DIV_ROUND_CLOSEST(((unsigned int)value) * TPS25990_VIN_OVF_DIV,
+                                         TPS25990_VIN_OVF_NUM);
+               value = clamp_val(value, 0, 0xf);
+               ret = pmbus_write_word_data(client, page, reg, value);
+               break;
+
+       case PMBUS_IIN_OC_FAULT_LIMIT:
+               value -= TPS25990_IIN_OCF_OFF;
+               value = DIV_ROUND_CLOSEST(((unsigned int)value) * TPS25990_IIN_OCF_DIV,
+                                         TPS25990_IIN_OCF_NUM);
+               value = clamp_val(value, 0, 0x3f);
+               ret = pmbus_write_byte_data(client, page, TPS25990_VIREF, value);
+               break;
+
+       case PMBUS_VIRT_SAMPLES:
+               value = clamp_val(value, 1, 1 << PK_MIN_AVG_AVG_CNT);
+               value = ilog2(value);
+               ret = pmbus_update_byte_data(client, page, TPS25990_PK_MIN_AVG,
+                                            PK_MIN_AVG_AVG_CNT,
+                                            FIELD_PREP(PK_MIN_AVG_AVG_CNT, value));
+               break;
+
+       case PMBUS_VIRT_RESET_TEMP_HISTORY:
+       case PMBUS_VIRT_RESET_VIN_HISTORY:
+       case PMBUS_VIRT_RESET_IIN_HISTORY:
+       case PMBUS_VIRT_RESET_PIN_HISTORY:
+       case PMBUS_VIRT_RESET_VOUT_HISTORY:
+               /*
+                * TPS25990 has history resets based on MIN/AVG/PEAK instead of per
+                * sensor type. Exposing this quirk in hwmon is not desirable so
+                * reset MIN, AVG and PEAK together. Even is there effectively only
+                * one reset, which resets everything, expose the 5 entries so
+                * userspace is not required map a sensor type to another to trigger
+                * a reset
+                */
+               ret = pmbus_update_byte_data(client, 0, TPS25990_PK_MIN_AVG,
+                                            PK_MIN_AVG_RST_MASK,
+                                            PK_MIN_AVG_RST_MASK);
+               break;
+
+       default:
+               ret = -ENODATA;
+               break;
+       }
+
+       return ret;
+}
+
+static int tps25990_read_byte_data(struct i2c_client *client,
+                                  int page, int reg)
+{
+       int ret;
+
+       switch (reg) {
+       case PMBUS_WRITE_PROTECT:
+               ret = tps25990_mfr_write_protect_get(client);
+               break;
+
+       default:
+               ret = -ENODATA;
+               break;
+       }
+
+       return ret;
+}
+
+static int tps25990_write_byte_data(struct i2c_client *client,
+                                   int page, int reg, u8 byte)
+{
+       int ret;
+
+       switch (reg) {
+       case PMBUS_WRITE_PROTECT:
+               ret = tps25990_mfr_write_protect_set(client, byte);
+               break;
+
+       default:
+               ret = -ENODATA;
+               break;
+       }
+
+       return ret;
+}
+
+#if IS_ENABLED(CONFIG_SENSORS_TPS25990_REGULATOR)
+static const struct regulator_desc tps25990_reg_desc[] = {
+       PMBUS_REGULATOR_ONE("vout"),
+};
+#endif
+
+static const struct pmbus_driver_info tps25990_base_info = {
+       .pages = 1,
+       .format[PSC_VOLTAGE_IN] = direct,
+       .m[PSC_VOLTAGE_IN] = 5251,
+       .b[PSC_VOLTAGE_IN] = 0,
+       .R[PSC_VOLTAGE_IN] = -2,
+       .format[PSC_VOLTAGE_OUT] = direct,
+       .m[PSC_VOLTAGE_OUT] = 5251,
+       .b[PSC_VOLTAGE_OUT] = 0,
+       .R[PSC_VOLTAGE_OUT] = -2,
+       .format[PSC_TEMPERATURE] = direct,
+       .m[PSC_TEMPERATURE] = 140,
+       .b[PSC_TEMPERATURE] = 32100,
+       .R[PSC_TEMPERATURE] = -2,
+       /*
+        * Current and Power measurement depends on the ohm value
+        * of Rimon. m is multiplied by 1000 below to have an integer
+        * and -3 is added to R to compensate.
+        */
+       .format[PSC_CURRENT_IN] = direct,
+       .m[PSC_CURRENT_IN] = 9538,
+       .b[PSC_CURRENT_IN] = 0,
+       .R[PSC_CURRENT_IN] = -6,
+       .format[PSC_POWER] = direct,
+       .m[PSC_POWER] = 4901,
+       .b[PSC_POWER] = 0,
+       .R[PSC_POWER] = -7,
+       .func[0] = (PMBUS_HAVE_VIN |
+                   PMBUS_HAVE_VOUT |
+                   PMBUS_HAVE_VMON |
+                   PMBUS_HAVE_IIN |
+                   PMBUS_HAVE_PIN |
+                   PMBUS_HAVE_TEMP |
+                   PMBUS_HAVE_STATUS_VOUT |
+                   PMBUS_HAVE_STATUS_IOUT |
+                   PMBUS_HAVE_STATUS_INPUT |
+                   PMBUS_HAVE_STATUS_TEMP |
+                   PMBUS_HAVE_SAMPLES),
+       .read_word_data = tps25990_read_word_data,
+       .write_word_data = tps25990_write_word_data,
+       .read_byte_data = tps25990_read_byte_data,
+       .write_byte_data = tps25990_write_byte_data,
+
+#if IS_ENABLED(CONFIG_SENSORS_TPS25990_REGULATOR)
+       .reg_desc = tps25990_reg_desc,
+       .num_regulators = ARRAY_SIZE(tps25990_reg_desc),
+#endif
+};
+
+static const struct i2c_device_id tps25990_i2c_id[] = {
+       { "tps25990" },
+       {}
+};
+MODULE_DEVICE_TABLE(i2c, tps25990_i2c_id);
+
+static const struct of_device_id tps25990_of_match[] = {
+       { .compatible = "ti,tps25990" },
+       {}
+};
+MODULE_DEVICE_TABLE(of, tps25990_of_match);
+
+static int tps25990_probe(struct i2c_client *client)
+{
+       struct device *dev = &client->dev;
+       struct pmbus_driver_info *info;
+       u32 rimon = TPS25990_DEFAULT_RIMON;
+       int ret;
+
+       ret = device_property_read_u32(dev, "ti,rimon-micro-ohms", &rimon);
+       if (ret < 0 && ret != -EINVAL)
+               return dev_err_probe(dev, ret, "failed to get rimon\n");
+
+       info = devm_kmemdup(dev, &tps25990_base_info, sizeof(*info), GFP_KERNEL);
+       if (!info)
+               return -ENOMEM;
+
+       /* Adapt the current and power scale for each instance */
+       tps25990_set_m(&info->m[PSC_CURRENT_IN], rimon);
+       tps25990_set_m(&info->m[PSC_POWER], rimon);
+
+       return pmbus_do_probe(client, info);
+}
+
+static struct i2c_driver tps25990_driver = {
+       .driver = {
+               .name = "tps25990",
+               .of_match_table = tps25990_of_match,
+       },
+       .probe = tps25990_probe,
+       .id_table = tps25990_i2c_id,
+};
+module_i2c_driver(tps25990_driver);
+
+MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
+MODULE_DESCRIPTION("PMBUS driver for TPS25990 eFuse");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("PMBUS");