# echo 0x104c > functions/pci_epf_test/func1/vendorid
# echo 0xb500 > functions/pci_epf_test/func1/deviceid
- # echo 16 > functions/pci_epf_test/func1/msi_interrupts
- # echo 8 > functions/pci_epf_test/func1/msix_interrupts
+ # echo 32 > functions/pci_epf_test/func1/msi_interrupts
+ # echo 2048 > functions/pci_epf_test/func1/msix_interrupts
Binding pci-epf-test Device to EP Controller
Using Endpoint Test function Device
-----------------------------------
-pcitest.sh added in tools/testing/selftests/pci_endpoint can be used to run all
-the default PCI endpoint tests. To compile this tool the following commands
-should be used::
+Kselftest added in tools/testing/selftests/pci_endpoint can be used to run all
+the default PCI endpoint tests. To build the Kselftest for PCI endpoint
+subsystem, the following commands should be used::
# cd <kernel-dir>
# make -C tools/testing/selftests/pci_endpoint
or if you desire to compile and install in your system::
# cd <kernel-dir>
- # make -C tools/testing/selftests/pci_endpoint install
+ # make -C tools/testing/selftests/pci_endpoint INSTALL_PATH=/usr/bin install
-The tool and script will be located in <rootfs>/usr/bin/
+The test will be located in <rootfs>/usr/bin/
-
-pcitest.sh Output
-~~~~~~~~~~~~~~~~~
+Kselftest Output
+~~~~~~~~~~~~~~~~
::
- # pcitest.sh
- BAR tests
-
- BAR0: OKAY
- BAR1: OKAY
- BAR2: OKAY
- BAR3: OKAY
- BAR4: NOT OKAY
- BAR5: NOT OKAY
-
- Interrupt tests
-
- SET IRQ TYPE TO LEGACY: OKAY
- LEGACY IRQ: NOT OKAY
- SET IRQ TYPE TO MSI: OKAY
- MSI1: OKAY
- MSI2: OKAY
- MSI3: OKAY
- MSI4: OKAY
- MSI5: OKAY
- MSI6: OKAY
- MSI7: OKAY
- MSI8: OKAY
- MSI9: OKAY
- MSI10: OKAY
- MSI11: OKAY
- MSI12: OKAY
- MSI13: OKAY
- MSI14: OKAY
- MSI15: OKAY
- MSI16: OKAY
- MSI17: NOT OKAY
- MSI18: NOT OKAY
- MSI19: NOT OKAY
- MSI20: NOT OKAY
- MSI21: NOT OKAY
- MSI22: NOT OKAY
- MSI23: NOT OKAY
- MSI24: NOT OKAY
- MSI25: NOT OKAY
- MSI26: NOT OKAY
- MSI27: NOT OKAY
- MSI28: NOT OKAY
- MSI29: NOT OKAY
- MSI30: NOT OKAY
- MSI31: NOT OKAY
- MSI32: NOT OKAY
- SET IRQ TYPE TO MSI-X: OKAY
- MSI-X1: OKAY
- MSI-X2: OKAY
- MSI-X3: OKAY
- MSI-X4: OKAY
- MSI-X5: OKAY
- MSI-X6: OKAY
- MSI-X7: OKAY
- MSI-X8: OKAY
- MSI-X9: NOT OKAY
- MSI-X10: NOT OKAY
- MSI-X11: NOT OKAY
- MSI-X12: NOT OKAY
- MSI-X13: NOT OKAY
- MSI-X14: NOT OKAY
- MSI-X15: NOT OKAY
- MSI-X16: NOT OKAY
- [...]
- MSI-X2047: NOT OKAY
- MSI-X2048: NOT OKAY
-
- Read Tests
-
- SET IRQ TYPE TO MSI: OKAY
- READ ( 1 bytes): OKAY
- READ ( 1024 bytes): OKAY
- READ ( 1025 bytes): OKAY
- READ (1024000 bytes): OKAY
- READ (1024001 bytes): OKAY
-
- Write Tests
-
- WRITE ( 1 bytes): OKAY
- WRITE ( 1024 bytes): OKAY
- WRITE ( 1025 bytes): OKAY
- WRITE (1024000 bytes): OKAY
- WRITE (1024001 bytes): OKAY
-
- Copy Tests
-
- COPY ( 1 bytes): OKAY
- COPY ( 1024 bytes): OKAY
- COPY ( 1025 bytes): OKAY
- COPY (1024000 bytes): OKAY
- COPY (1024001 bytes): OKAY
+ # pci_endpoint_test
+ TAP version 13
+ 1..16
+ # Starting 16 tests from 9 test cases.
+ # RUN pci_ep_bar.BAR0.BAR_TEST ...
+ # OK pci_ep_bar.BAR0.BAR_TEST
+ ok 1 pci_ep_bar.BAR0.BAR_TEST
+ # RUN pci_ep_bar.BAR1.BAR_TEST ...
+ # OK pci_ep_bar.BAR1.BAR_TEST
+ ok 2 pci_ep_bar.BAR1.BAR_TEST
+ # RUN pci_ep_bar.BAR2.BAR_TEST ...
+ # OK pci_ep_bar.BAR2.BAR_TEST
+ ok 3 pci_ep_bar.BAR2.BAR_TEST
+ # RUN pci_ep_bar.BAR3.BAR_TEST ...
+ # OK pci_ep_bar.BAR3.BAR_TEST
+ ok 4 pci_ep_bar.BAR3.BAR_TEST
+ # RUN pci_ep_bar.BAR4.BAR_TEST ...
+ # OK pci_ep_bar.BAR4.BAR_TEST
+ ok 5 pci_ep_bar.BAR4.BAR_TEST
+ # RUN pci_ep_bar.BAR5.BAR_TEST ...
+ # OK pci_ep_bar.BAR5.BAR_TEST
+ ok 6 pci_ep_bar.BAR5.BAR_TEST
+ # RUN pci_ep_basic.CONSECUTIVE_BAR_TEST ...
+ # OK pci_ep_basic.CONSECUTIVE_BAR_TEST
+ ok 7 pci_ep_basic.CONSECUTIVE_BAR_TEST
+ # RUN pci_ep_basic.LEGACY_IRQ_TEST ...
+ # OK pci_ep_basic.LEGACY_IRQ_TEST
+ ok 8 pci_ep_basic.LEGACY_IRQ_TEST
+ # RUN pci_ep_basic.MSI_TEST ...
+ # OK pci_ep_basic.MSI_TEST
+ ok 9 pci_ep_basic.MSI_TEST
+ # RUN pci_ep_basic.MSIX_TEST ...
+ # OK pci_ep_basic.MSIX_TEST
+ ok 10 pci_ep_basic.MSIX_TEST
+ # RUN pci_ep_data_transfer.memcpy.READ_TEST ...
+ # OK pci_ep_data_transfer.memcpy.READ_TEST
+ ok 11 pci_ep_data_transfer.memcpy.READ_TEST
+ # RUN pci_ep_data_transfer.memcpy.WRITE_TEST ...
+ # OK pci_ep_data_transfer.memcpy.WRITE_TEST
+ ok 12 pci_ep_data_transfer.memcpy.WRITE_TEST
+ # RUN pci_ep_data_transfer.memcpy.COPY_TEST ...
+ # OK pci_ep_data_transfer.memcpy.COPY_TEST
+ ok 13 pci_ep_data_transfer.memcpy.COPY_TEST
+ # RUN pci_ep_data_transfer.dma.READ_TEST ...
+ # OK pci_ep_data_transfer.dma.READ_TEST
+ ok 14 pci_ep_data_transfer.dma.READ_TEST
+ # RUN pci_ep_data_transfer.dma.WRITE_TEST ...
+ # OK pci_ep_data_transfer.dma.WRITE_TEST
+ ok 15 pci_ep_data_transfer.dma.WRITE_TEST
+ # RUN pci_ep_data_transfer.dma.COPY_TEST ...
+ # OK pci_ep_data_transfer.dma.COPY_TEST
+ ok 16 pci_ep_data_transfer.dma.COPY_TEST
+ # PASSED: 16 / 16 tests passed.
+ # Totals: pass:16 fail:0 xfail:0 xpass:0 skip:0 error:0
+
+
+Testcase 16 (pci_ep_data_transfer.dma.COPY_TEST) will fail for most of the DMA
+capable endpoint controllers due to the absence of the MEMCPY over DMA. For such
+controllers, it is advisable to skip this testcase using this
+command::
+
+ # pci_endpoint_test -f pci_ep_bar -f pci_ep_basic -v memcpy -T COPY_TEST -v dma
TARGETS += net/rds
TARGETS += net/tcp_ao
TARGETS += nsfs
+TARGETS += pci_endpoint
TARGETS += pcie_bwctrl
TARGETS += perf_events
TARGETS += pidfd
# SPDX-License-Identifier: GPL-2.0-only
-*.o
-pcitest
+pci_endpoint_test
+++ /dev/null
-pcitest-y += pcitest.o
# SPDX-License-Identifier: GPL-2.0
-include ../../../scripts/Makefile.include
+CFLAGS += -O2 -Wl,-no-as-needed -Wall $(KHDR_INCLUDES)
+LDFLAGS += -lrt -lpthread -lm
-bindir ?= /usr/bin
+TEST_GEN_PROGS = pci_endpoint_test
-ifeq ($(srctree),)
-srctree := $(patsubst %/tools/testing/selftests/,%,$(dir $(CURDIR)))
-endif
-
-# Do not use make's built-in rules
-# (this improves performance and avoids hard-to-debug behaviour);
-MAKEFLAGS += -r
-
-CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include
-
-ALL_TARGETS := pcitest
-ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS))
-
-SCRIPTS := pcitest.sh
-
-all: $(ALL_PROGRAMS)
-
-export srctree OUTPUT CC LD CFLAGS
-include $(srctree)/tools/build/Makefile.include
-
-#
-# We need the following to be outside of kernel tree
-#
-$(OUTPUT)include/linux/: ../../../../include/uapi/linux/
- mkdir -p $(OUTPUT)include/linux/ 2>&1 || true
- ln -sf $(CURDIR)/../../../../include/uapi/linux/pcitest.h $@
-
-$(info ${CURDIR})
-prepare: $(OUTPUT)include/linux/
-
-PCITEST_IN := $(OUTPUT)pcitest-in.o
-$(PCITEST_IN): prepare FORCE
- $(Q)$(MAKE) $(build)=pcitest
-$(OUTPUT)pcitest: $(PCITEST_IN)
- $(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
-
-clean:
- rm -f $(ALL_PROGRAMS)
- rm -rf $(OUTPUT)include/
- find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete
-
-install: $(ALL_PROGRAMS)
- install -d -m 755 $(DESTDIR)$(bindir); \
- for program in $(ALL_PROGRAMS); do \
- install $$program $(DESTDIR)$(bindir); \
- done; \
- for script in $(SCRIPTS); do \
- install $$script $(DESTDIR)$(bindir); \
- done
-
-FORCE:
-
-.PHONY: all install clean FORCE prepare
+include ../lib.mk
--- /dev/null
+CONFIG_PCI_ENDPOINT=y
+CONFIG_PCI_ENDPOINT_CONFIGFS=y
+CONFIG_PCI_EPF_TEST=m
+CONFIG_PCI_ENDPOINT_TEST=m
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kselftest for PCI Endpoint Subsystem
+ *
+ * Copyright (c) 2022 Samsung Electronics Co., Ltd.
+ * https://www.samsung.com
+ * Author: Aman Gupta <aman1.gupta@samsung.com>
+ *
+ * Copyright (c) 2024, Linaro Ltd.
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <errno.h>
+#include <fcntl.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/ioctl.h>
+#include <unistd.h>
+
+#include "../../../../include/uapi/linux/pcitest.h"
+
+#include "../kselftest_harness.h"
+
+#define pci_ep_ioctl(cmd, arg) \
+({ \
+ ret = ioctl(self->fd, cmd, arg); \
+ ret = ret < 0 ? -errno : 0; \
+})
+
+static const char *test_device = "/dev/pci-endpoint-test.0";
+static const unsigned long test_size[5] = { 1, 1024, 1025, 1024000, 1024001 };
+
+FIXTURE(pci_ep_bar)
+{
+ int fd;
+};
+
+FIXTURE_SETUP(pci_ep_bar)
+{
+ self->fd = open(test_device, O_RDWR);
+
+ ASSERT_NE(-1, self->fd) TH_LOG("Can't open PCI Endpoint Test device");
+}
+
+FIXTURE_TEARDOWN(pci_ep_bar)
+{
+ close(self->fd);
+}
+
+FIXTURE_VARIANT(pci_ep_bar)
+{
+ int barno;
+};
+
+FIXTURE_VARIANT_ADD(pci_ep_bar, BAR0) { .barno = 0 };
+FIXTURE_VARIANT_ADD(pci_ep_bar, BAR1) { .barno = 1 };
+FIXTURE_VARIANT_ADD(pci_ep_bar, BAR2) { .barno = 2 };
+FIXTURE_VARIANT_ADD(pci_ep_bar, BAR3) { .barno = 3 };
+FIXTURE_VARIANT_ADD(pci_ep_bar, BAR4) { .barno = 4 };
+FIXTURE_VARIANT_ADD(pci_ep_bar, BAR5) { .barno = 5 };
+
+TEST_F(pci_ep_bar, BAR_TEST)
+{
+ int ret;
+
+ pci_ep_ioctl(PCITEST_BAR, variant->barno);
+ EXPECT_FALSE(ret) TH_LOG("Test failed for BAR%d", variant->barno);
+}
+
+FIXTURE(pci_ep_basic)
+{
+ int fd;
+};
+
+FIXTURE_SETUP(pci_ep_basic)
+{
+ self->fd = open(test_device, O_RDWR);
+
+ ASSERT_NE(-1, self->fd) TH_LOG("Can't open PCI Endpoint Test device");
+}
+
+FIXTURE_TEARDOWN(pci_ep_basic)
+{
+ close(self->fd);
+}
+
+TEST_F(pci_ep_basic, CONSECUTIVE_BAR_TEST)
+{
+ int ret;
+
+ pci_ep_ioctl(PCITEST_BARS, 0);
+ EXPECT_FALSE(ret) TH_LOG("Consecutive BAR test failed");
+}
+
+TEST_F(pci_ep_basic, LEGACY_IRQ_TEST)
+{
+ int ret;
+
+ pci_ep_ioctl(PCITEST_SET_IRQTYPE, 0);
+ ASSERT_EQ(0, ret) TH_LOG("Can't set Legacy IRQ type");
+
+ pci_ep_ioctl(PCITEST_LEGACY_IRQ, 0);
+ EXPECT_FALSE(ret) TH_LOG("Test failed for Legacy IRQ");
+}
+
+TEST_F(pci_ep_basic, MSI_TEST)
+{
+ int ret, i;
+
+ pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1);
+ ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type");
+
+ for (i = 1; i <= 32; i++) {
+ pci_ep_ioctl(PCITEST_MSI, i);
+ EXPECT_FALSE(ret) TH_LOG("Test failed for MSI%d", i);
+ }
+}
+
+TEST_F(pci_ep_basic, MSIX_TEST)
+{
+ int ret, i;
+
+ pci_ep_ioctl(PCITEST_SET_IRQTYPE, 2);
+ ASSERT_EQ(0, ret) TH_LOG("Can't set MSI-X IRQ type");
+
+ for (i = 1; i <= 2048; i++) {
+ pci_ep_ioctl(PCITEST_MSIX, i);
+ EXPECT_FALSE(ret) TH_LOG("Test failed for MSI-X%d", i);
+ }
+}
+
+FIXTURE(pci_ep_data_transfer)
+{
+ int fd;
+};
+
+FIXTURE_SETUP(pci_ep_data_transfer)
+{
+ self->fd = open(test_device, O_RDWR);
+
+ ASSERT_NE(-1, self->fd) TH_LOG("Can't open PCI Endpoint Test device");
+}
+
+FIXTURE_TEARDOWN(pci_ep_data_transfer)
+{
+ close(self->fd);
+}
+
+FIXTURE_VARIANT(pci_ep_data_transfer)
+{
+ bool use_dma;
+};
+
+FIXTURE_VARIANT_ADD(pci_ep_data_transfer, memcpy)
+{
+ .use_dma = false,
+};
+
+FIXTURE_VARIANT_ADD(pci_ep_data_transfer, dma)
+{
+ .use_dma = true,
+};
+
+TEST_F(pci_ep_data_transfer, READ_TEST)
+{
+ struct pci_endpoint_test_xfer_param param = {};
+ int ret, i;
+
+ if (variant->use_dma)
+ param.flags = PCITEST_FLAGS_USE_DMA;
+
+ pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1);
+ ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type");
+
+ for (i = 0; i < ARRAY_SIZE(test_size); i++) {
+ param.size = test_size[i];
+ pci_ep_ioctl(PCITEST_READ, ¶m);
+ EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)",
+ test_size[i]);
+ }
+}
+
+TEST_F(pci_ep_data_transfer, WRITE_TEST)
+{
+ struct pci_endpoint_test_xfer_param param = {};
+ int ret, i;
+
+ if (variant->use_dma)
+ param.flags = PCITEST_FLAGS_USE_DMA;
+
+ pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1);
+ ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type");
+
+ for (i = 0; i < ARRAY_SIZE(test_size); i++) {
+ param.size = test_size[i];
+ pci_ep_ioctl(PCITEST_WRITE, ¶m);
+ EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)",
+ test_size[i]);
+ }
+}
+
+TEST_F(pci_ep_data_transfer, COPY_TEST)
+{
+ struct pci_endpoint_test_xfer_param param = {};
+ int ret, i;
+
+ if (variant->use_dma)
+ param.flags = PCITEST_FLAGS_USE_DMA;
+
+ pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1);
+ ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type");
+
+ for (i = 0; i < ARRAY_SIZE(test_size); i++) {
+ param.size = test_size[i];
+ pci_ep_ioctl(PCITEST_COPY, ¶m);
+ EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)",
+ test_size[i]);
+ }
+}
+TEST_HARNESS_MAIN
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/**
- * Userspace PCI Endpoint Test Module
- *
- * Copyright (C) 2017 Texas Instruments
- * Author: Kishon Vijay Abraham I <kishon@ti.com>
- */
-
-#include <errno.h>
-#include <fcntl.h>
-#include <stdbool.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <sys/ioctl.h>
-#include <unistd.h>
-
-#include <linux/pcitest.h>
-
-static char *irq[] = { "LEGACY", "MSI", "MSI-X" };
-
-struct pci_test {
- char *device;
- char barnum;
- bool consecutive_bar_test;
- bool legacyirq;
- unsigned int msinum;
- unsigned int msixnum;
- int irqtype;
- bool set_irqtype;
- bool get_irqtype;
- bool clear_irq;
- bool read;
- bool write;
- bool copy;
- unsigned long size;
- bool use_dma;
-};
-
-static int run_test(struct pci_test *test)
-{
- struct pci_endpoint_test_xfer_param param = {};
- int ret = -EINVAL;
- int fd;
-
- fd = open(test->device, O_RDWR);
- if (fd < 0) {
- perror("can't open PCI Endpoint Test device");
- return -ENODEV;
- }
-
- if (test->barnum >= 0 && test->barnum <= 5) {
- ret = ioctl(fd, PCITEST_BAR, test->barnum);
- fprintf(stdout, "BAR%d:\t\t", test->barnum);
- if (ret < 0)
- fprintf(stdout, "NOT OKAY\n");
- else
- fprintf(stdout, "OKAY\n");
- }
-
- if (test->consecutive_bar_test) {
- ret = ioctl(fd, PCITEST_BARS);
- fprintf(stdout, "Consecutive BAR test:\t\t");
- if (ret < 0)
- fprintf(stdout, "NOT OKAY\n");
- else
- fprintf(stdout, "OKAY\n");
- }
-
- if (test->set_irqtype) {
- ret = ioctl(fd, PCITEST_SET_IRQTYPE, test->irqtype);
- fprintf(stdout, "SET IRQ TYPE TO %s:\t\t", irq[test->irqtype]);
- if (ret < 0)
- fprintf(stdout, "NOT OKAY\n");
- else
- fprintf(stdout, "OKAY\n");
- }
-
- if (test->get_irqtype) {
- ret = ioctl(fd, PCITEST_GET_IRQTYPE);
- fprintf(stdout, "GET IRQ TYPE:\t\t");
- if (ret < 0) {
- fprintf(stdout, "NOT OKAY\n");
- } else {
- fprintf(stdout, "%s\n", irq[ret]);
- ret = 0;
- }
- }
-
- if (test->clear_irq) {
- ret = ioctl(fd, PCITEST_CLEAR_IRQ);
- fprintf(stdout, "CLEAR IRQ:\t\t");
- if (ret < 0)
- fprintf(stdout, "NOT OKAY\n");
- else
- fprintf(stdout, "OKAY\n");
- }
-
- if (test->legacyirq) {
- ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0);
- fprintf(stdout, "LEGACY IRQ:\t");
- if (ret < 0)
- fprintf(stdout, "NOT OKAY\n");
- else
- fprintf(stdout, "OKAY\n");
- }
-
- if (test->msinum > 0 && test->msinum <= 32) {
- ret = ioctl(fd, PCITEST_MSI, test->msinum);
- fprintf(stdout, "MSI%u:\t\t", test->msinum);
- if (ret < 0)
- fprintf(stdout, "NOT OKAY\n");
- else
- fprintf(stdout, "OKAY\n");
- }
-
- if (test->msixnum > 0 && test->msixnum <= 2048) {
- ret = ioctl(fd, PCITEST_MSIX, test->msixnum);
- fprintf(stdout, "MSI-X%u:\t\t", test->msixnum);
- if (ret < 0)
- fprintf(stdout, "NOT OKAY\n");
- else
- fprintf(stdout, "OKAY\n");
- }
-
- if (test->write) {
- param.size = test->size;
- if (test->use_dma)
- param.flags = PCITEST_FLAGS_USE_DMA;
- ret = ioctl(fd, PCITEST_WRITE, ¶m);
- fprintf(stdout, "WRITE (%7lu bytes):\t\t", test->size);
- if (ret < 0)
- fprintf(stdout, "NOT OKAY\n");
- else
- fprintf(stdout, "OKAY\n");
- }
-
- if (test->read) {
- param.size = test->size;
- if (test->use_dma)
- param.flags = PCITEST_FLAGS_USE_DMA;
- ret = ioctl(fd, PCITEST_READ, ¶m);
- fprintf(stdout, "READ (%7lu bytes):\t\t", test->size);
- if (ret < 0)
- fprintf(stdout, "NOT OKAY\n");
- else
- fprintf(stdout, "OKAY\n");
- }
-
- if (test->copy) {
- param.size = test->size;
- if (test->use_dma)
- param.flags = PCITEST_FLAGS_USE_DMA;
- ret = ioctl(fd, PCITEST_COPY, ¶m);
- fprintf(stdout, "COPY (%7lu bytes):\t\t", test->size);
- if (ret < 0)
- fprintf(stdout, "NOT OKAY\n");
- else
- fprintf(stdout, "OKAY\n");
- }
-
- fflush(stdout);
- close(fd);
- return ret;
-}
-
-int main(int argc, char **argv)
-{
- int c;
- struct pci_test *test;
-
- test = calloc(1, sizeof(*test));
- if (!test) {
- perror("Fail to allocate memory for pci_test\n");
- return -ENOMEM;
- }
-
- /* since '0' is a valid BAR number, initialize it to -1 */
- test->barnum = -1;
-
- /* set default size as 100KB */
- test->size = 0x19000;
-
- /* set default endpoint device */
- test->device = "/dev/pci-endpoint-test.0";
-
- while ((c = getopt(argc, argv, "D:b:Cm:x:i:deIlhrwcs:")) != EOF)
- switch (c) {
- case 'D':
- test->device = optarg;
- continue;
- case 'b':
- test->barnum = atoi(optarg);
- if (test->barnum < 0 || test->barnum > 5)
- goto usage;
- continue;
- case 'C':
- test->consecutive_bar_test = true;
- continue;
- case 'l':
- test->legacyirq = true;
- continue;
- case 'm':
- test->msinum = atoi(optarg);
- if (test->msinum < 1 || test->msinum > 32)
- goto usage;
- continue;
- case 'x':
- test->msixnum = atoi(optarg);
- if (test->msixnum < 1 || test->msixnum > 2048)
- goto usage;
- continue;
- case 'i':
- test->irqtype = atoi(optarg);
- if (test->irqtype < 0 || test->irqtype > 2)
- goto usage;
- test->set_irqtype = true;
- continue;
- case 'I':
- test->get_irqtype = true;
- continue;
- case 'r':
- test->read = true;
- continue;
- case 'w':
- test->write = true;
- continue;
- case 'c':
- test->copy = true;
- continue;
- case 'e':
- test->clear_irq = true;
- continue;
- case 's':
- test->size = strtoul(optarg, NULL, 0);
- continue;
- case 'd':
- test->use_dma = true;
- continue;
- case 'h':
- default:
-usage:
- fprintf(stderr,
- "usage: %s [options]\n"
- "Options:\n"
- "\t-D <dev> PCI endpoint test device {default: /dev/pci-endpoint-test.0}\n"
- "\t-b <bar num> BAR test (bar number between 0..5)\n"
- "\t-C Consecutive BAR test\n"
- "\t-m <msi num> MSI test (msi number between 1..32)\n"
- "\t-x <msix num> \tMSI-X test (msix number between 1..2048)\n"
- "\t-i <irq type> \tSet IRQ type (0 - Legacy, 1 - MSI, 2 - MSI-X)\n"
- "\t-e Clear IRQ\n"
- "\t-I Get current IRQ type configured\n"
- "\t-d Use DMA\n"
- "\t-l Legacy IRQ test\n"
- "\t-r Read buffer test\n"
- "\t-w Write buffer test\n"
- "\t-c Copy buffer test\n"
- "\t-s <size> Size of buffer {default: 100KB}\n"
- "\t-h Print this help message\n",
- argv[0]);
- return -EINVAL;
- }
-
- return run_test(test);
-}
+++ /dev/null
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-echo "BAR tests"
-echo
-
-bar=0
-
-while [ $bar -lt 6 ]
-do
- pcitest -b $bar
- bar=`expr $bar + 1`
-done
-pcitest -C
-echo
-
-echo "Interrupt tests"
-echo
-
-pcitest -i 0
-pcitest -l
-
-pcitest -i 1
-msi=1
-
-while [ $msi -lt 33 ]
-do
- pcitest -m $msi
- msi=`expr $msi + 1`
-done
-echo
-
-pcitest -i 2
-msix=1
-
-while [ $msix -lt 2049 ]
-do
- pcitest -x $msix
- msix=`expr $msix + 1`
-done
-echo
-
-echo "Read Tests"
-echo
-
-pcitest -i 1
-
-pcitest -r -s 1
-pcitest -r -s 1024
-pcitest -r -s 1025
-pcitest -r -s 1024000
-pcitest -r -s 1024001
-echo
-
-echo "Write Tests"
-echo
-
-pcitest -w -s 1
-pcitest -w -s 1024
-pcitest -w -s 1025
-pcitest -w -s 1024000
-pcitest -w -s 1024001
-echo
-
-echo "Copy Tests"
-echo
-
-pcitest -c -s 1
-pcitest -c -s 1024
-pcitest -c -s 1025
-pcitest -c -s 1024000
-pcitest -c -s 1024001
-echo
projects / thirdparty / kernel / linux.git / commitdiff
