arm64: dts: qcom: rename PM2250 to PM4125

It seems, the only actual mentions of PM2250 can be found are related to
the Qualcomm RB1 platform. However even RB1 schematics use PM4125 as a
PMIC name. Rename PM2250 to PM4125 to follow the documentation.

Note, this doesn't change the compatible strings. There was a previous
argument regarding renaming of compat strings.

Fixes: c309b9a54039 ("arm64: dts: qcom: Add initial PM2250 device tree")
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240128-pm2250-pm4125-rename-v2-2-d51987e9f83a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/pm2250.dtsi b/arch/arm64/boot/dts/qcom/pm4125.dtsi
similarity index 91%
rename from arch/arm64/boot/dts/qcom/pm2250.dtsi
rename to arch/arm64/boot/dts/qcom/pm4125.dtsi
index 5f1d15db5c9934b58d7e1bdf043e61ae0141df33..d886a9e4b091882b5da0f312a9a02a6857fe0f58 100644 (file)
--- a/arch/arm64/boot/dts/qcom/pm2250.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm4125.dtsi
@@ -19,7 +19,7 @@
                        compatible = "qcom,pm8916-pon";
                        reg = <0x800>;
 
-                       pm2250_pwrkey: pwrkey {
+                       pm4125_pwrkey: pwrkey {
                                compatible = "qcom,pm8941-pwrkey";
                                interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
                                linux,code = <KEY_POWER>;
@@ -27,7 +27,7 @@
                                bias-pull-up;
                        };
 
-                       pm2250_resin: resin {
+                       pm4125_resin: resin {
                                compatible = "qcom,pm8941-resin";
                                interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
                                debounce = <15625>;
@@ -43,11 +43,11 @@
                        interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
                };
 
-               pm2250_gpios: gpio@c000 {
+               pm4125_gpios: gpio@c000 {
                        compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio";
                        reg = <0xc000>;
                        gpio-controller;
-                       gpio-ranges = <&pm2250_gpios 0 0 10>;
+                       gpio-ranges = <&pm4125_gpios 0 0 10>;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupt-cells = <2>;

diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index aa53b6af6d9cbd1c1331f0ddf06a7aab70336eb3..64b2ab28627933e9ac77edc1157880b52167a884 100644 (file)
--- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -7,7 +7,7 @@
 
 #include <dt-bindings/leds/common.h>
 #include "qcm2290.dtsi"
-#include "pm2250.dtsi"
+#include "pm4125.dtsi"
 
 / {
        model = "Qualcomm Technologies, Inc. Robotics RB1";
@@ -226,7 +226,7 @@
 };
 
 &mdss_dsi0 {
-       vdda-supply = <&pm2250_l5>;
+       vdda-supply = <&pm4125_l5>;
        status = "okay";
 };
 
@@ -239,7 +239,7 @@
        status = "okay";
 };
 
-&pm2250_resin {
+&pm4125_resin {
        linux,code = <KEY_VOLUMEDOWN>;
        status = "okay";
 };
@@ -263,23 +263,23 @@
                compatible = "qcom,rpm-pm2250-regulators";
                vdd_s3-supply = <&vph_pwr>;
                vdd_s4-supply = <&vph_pwr>;
-               vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm2250_s3>;
+               vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm4125_s3>;
                vdd_l4_l17_l18_l19_l20_l21_l22-supply = <&vph_pwr>;
-               vdd_l13_l14_l15_l16-supply = <&pm2250_s4>;
+               vdd_l13_l14_l15_l16-supply = <&pm4125_s4>;
 
                /*
                 * S1 - VDD_APC
                 * S2 - VDD_CX
                 */
 
-               pm2250_s3: s3 {
+               pm4125_s3: s3 {
                        /* 0.4V-1.6625V -> 1.3V (Power tree requirements) */
                        regulator-min-microvolt = <1352000>;
                        regulator-max-microvolt = <1352000>;
                        regulator-boot-on;
                };
 
-               pm2250_s4: s4 {
+               pm4125_s4: s4 {
                        /* 1.2V-2.35V -> 2.05V (Power tree requirements) */
                        regulator-min-microvolt = <2072000>;
                        regulator-max-microvolt = <2072000>;
@@ -288,7 +288,7 @@
 
                /* L1 - VDD_MX */
 
-               pm2250_l2: l2 {
+               pm4125_l2: l2 {
                        /* LPDDR4X VDD2 */
                        regulator-min-microvolt = <1136000>;
                        regulator-max-microvolt = <1136000>;
@@ -296,7 +296,7 @@
                        regulator-boot-on;
                };
 
-               pm2250_l3: l3 {
+               pm4125_l3: l3 {
                        /* LPDDR4X VDDQ */
                        regulator-min-microvolt = <616000>;
                        regulator-max-microvolt = <616000>;
@@ -304,14 +304,14 @@
                        regulator-boot-on;
                };
 
-               pm2250_l4: l4 {
+               pm4125_l4: l4 {
                        /* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */
                        regulator-min-microvolt = <1800000>;
                        regulator-max-microvolt = <2700000>;
                        regulator-allow-set-load;
                };
 
-               pm2250_l5: l5 {
+               pm4125_l5: l5 {
                        /* CSI/DSI */
                        regulator-min-microvolt = <1232000>;
                        regulator-max-microvolt = <1232000>;
@@ -319,7 +319,7 @@
                        regulator-boot-on;
                };
 
-               pm2250_l6: l6 {
+               pm4125_l6: l6 {
                        /* DRAM PLL */
                        regulator-min-microvolt = <928000>;
                        regulator-max-microvolt = <928000>;
@@ -327,7 +327,7 @@
                        regulator-boot-on;
                };
 
-               pm2250_l7: l7 {
+               pm4125_l7: l7 {
                        /* Wi-Fi CX/MX */
                        regulator-min-microvolt = <664000>;
                        regulator-max-microvolt = <664000>;
@@ -338,20 +338,20 @@
                 * L9 - VDD_LPI_MX
                 */
 
-               pm2250_l10: l10 {
+               pm4125_l10: l10 {
                        /* Wi-Fi RFA */
                        regulator-min-microvolt = <1304000>;
                        regulator-max-microvolt = <1304000>;
                };
 
-               pm2250_l11: l11 {
+               pm4125_l11: l11 {
                        /* GPS RF1 */
                        regulator-min-microvolt = <1000000>;
                        regulator-max-microvolt = <1000000>;
                        regulator-boot-on;
                };
 
-               pm2250_l12: l12 {
+               pm4125_l12: l12 {
                        /* USB PHYs */
                        regulator-min-microvolt = <928000>;
                        regulator-max-microvolt = <928000>;
@@ -359,7 +359,7 @@
                        regulator-boot-on;
                };
 
-               pm2250_l13: l13 {
+               pm4125_l13: l13 {
                        /* USB/QFPROM/PLLs */
                        regulator-min-microvolt = <1800000>;
                        regulator-max-microvolt = <1800000>;
@@ -367,7 +367,7 @@
                        regulator-boot-on;
                };
 
-               pm2250_l14: l14 {
+               pm4125_l14: l14 {
                        /* SDHCI1 VQMMC */
                        regulator-min-microvolt = <1800000>;
                        regulator-max-microvolt = <1800000>;
@@ -376,7 +376,7 @@
                        regulator-always-on;
                };
 
-               pm2250_l15: l15 {
+               pm4125_l15: l15 {
                        /* WCD/DSI/BT VDDIO */
                        regulator-min-microvolt = <1800000>;
                        regulator-max-microvolt = <1800000>;
@@ -385,38 +385,38 @@
                        regulator-boot-on;
                };
 
-               pm2250_l16: l16 {
+               pm4125_l16: l16 {
                        /* GPS RF2 */
                        regulator-min-microvolt = <1800000>;
                        regulator-max-microvolt = <1800000>;
                        regulator-boot-on;
                };
 
-               pm2250_l17: l17 {
+               pm4125_l17: l17 {
                        regulator-min-microvolt = <3000000>;
                        regulator-max-microvolt = <3000000>;
                };
 
-               pm2250_l18: l18 {
+               pm4125_l18: l18 {
                        /* VDD_PXn */
                        regulator-min-microvolt = <1800000>;
                        regulator-max-microvolt = <1800000>;
                };
 
-               pm2250_l19: l19 {
+               pm4125_l19: l19 {
                        /* VDD_PXn */
                        regulator-min-microvolt = <1800000>;
                        regulator-max-microvolt = <1800000>;
                };
 
-               pm2250_l20: l20 {
+               pm4125_l20: l20 {
                        /* SDHCI1 VMMC */
                        regulator-min-microvolt = <2400000>;
                        regulator-max-microvolt = <3600000>;
                        regulator-allow-set-load;
                };
 
-               pm2250_l21: l21 {
+               pm4125_l21: l21 {
                        /* SDHCI2 VMMC */
                        regulator-min-microvolt = <2960000>;
                        regulator-max-microvolt = <3300000>;
@@ -424,7 +424,7 @@
                        regulator-boot-on;
                };
 
-               pm2250_l22: l22 {
+               pm4125_l22: l22 {
                        /* Wi-Fi */
                        regulator-min-microvolt = <3312000>;
                        regulator-max-microvolt = <3312000>;
@@ -433,8 +433,8 @@
 };
 
 &sdhc_1 {
-       vmmc-supply = <&pm2250_l20>;
-       vqmmc-supply = <&pm2250_l14>;
+       vmmc-supply = <&pm4125_l20>;
+       vqmmc-supply = <&pm4125_l14>;
        pinctrl-0 = <&sdc1_state_on>;
        pinctrl-1 = <&sdc1_state_off>;
        pinctrl-names = "default", "sleep";
@@ -446,8 +446,8 @@
 };
 
 &sdhc_2 {
-       vmmc-supply = <&pm2250_l21>;
-       vqmmc-supply = <&pm2250_l4>;
+       vmmc-supply = <&pm4125_l21>;
+       vqmmc-supply = <&pm4125_l4>;
        cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>;
        pinctrl-0 = <&sdc2_state_on &sd_det_in_on>;
        pinctrl-1 = <&sdc2_state_off &sd_det_in_off>;
@@ -518,8 +518,8 @@
 };
 
 &usb_qmpphy {
-       vdda-phy-supply = <&pm2250_l12>;
-       vdda-pll-supply = <&pm2250_l13>;
+       vdda-phy-supply = <&pm4125_l12>;
+       vdda-pll-supply = <&pm4125_l13>;
        status = "okay";
 };
 
@@ -528,17 +528,17 @@
 };
 
 &usb_hsphy {
-       vdd-supply = <&pm2250_l12>;
-       vdda-pll-supply = <&pm2250_l13>;
-       vdda-phy-dpdm-supply = <&pm2250_l21>;
+       vdd-supply = <&pm4125_l12>;
+       vdda-pll-supply = <&pm4125_l13>;
+       vdda-phy-dpdm-supply = <&pm4125_l21>;
        status = "okay";
 };
 
 &wifi {
-       vdd-0.8-cx-mx-supply = <&pm2250_l7>;
-       vdd-1.8-xo-supply = <&pm2250_l13>;
-       vdd-1.3-rfa-supply = <&pm2250_l10>;
-       vdd-3.3-ch0-supply = <&pm2250_l22>;
+       vdd-0.8-cx-mx-supply = <&pm4125_l7>;
+       vdd-1.8-xo-supply = <&pm4125_l13>;
+       vdd-1.3-rfa-supply = <&pm4125_l10>;
+       vdd-3.3-ch0-supply = <&pm4125_l22>;
        qcom,ath10k-calibration-variant = "Thundercomm_RB1";
        status = "okay";
 };