doc: microchip: add mpfs_video.rst

Add documentation to support the addition of the MPFS Video Kit.

Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>

diff --git a/doc/board/microchip/index.rst b/doc/board/microchip/index.rst
index affc5a9e014c5c797cd03856558acd91d1c8520e..571b8877f083f913c21b0feb195e6a5f02bfadd4 100644 (file)
--- a/doc/board/microchip/index.rst
+++ b/doc/board/microchip/index.rst
@@ -7,3 +7,4 @@ Microchip
    :maxdepth: 2
 
    mpfs_icicle
+   mpfs_video

diff --git a/doc/board/microchip/mpfs_video.rst b/doc/board/microchip/mpfs_video.rst
new file mode 100644 (file)
index 0000000..25df63f
--- /dev/null
+++ b/doc/board/microchip/mpfs_video.rst
@@ -0,0 +1,105 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Microchip PolarFire SoC Video Kit
+==================================
+
+RISC-V PolarFire SoC
+--------------------
+
+The PolarFire SoC is the 4+1 64-bit RISC-V SoC from Microchip.
+
+The Video Kit development platform is based on PolarFire SoC and capable
+of running Linux.
+
+Mainline support
+----------------
+
+The support for following drivers are already enabled:
+
+1. NS16550 UART Driver.
+2. Microchip Clock Driver.
+3. Cadence MACB ethernet driver for networking support.
+4. Cadence MMC Driver for eMMC/SD support.
+5. Microchip I2C Driver.
+
+.. include:: mpfs_build_boot.rst
+
+Microchip boot-flow
+~~~~~~~~~~~~~~~~~~~
+
+HSS with OpenSBI (M-Mode) -> U-Boot (S-Mode) -> Linux (S-Mode)
+
+Build the HSS (Hart Software Services) - Microchip boot-flow
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+(Note: HSS git repo is at https://github.com/polarfire-soc/hart-software-services)
+
+1. Configure
+
+.. code-block:: none
+
+   make BOARD=mpfs-video-kit config
+
+Alternatively, copy the default config for Microchip boot-flow.
+
+.. code-block:: none
+
+   cp boards/mpfs-video-kit/def_config .config
+
+2. make BOARD=mpfs-video-kit
+3. In the Default subdirectory, the standard build will create hss.elf and
+   various binary formats (hss.hex and hss.bin).
+
+The FPGA design will use the hss.hex or hss.bin.
+
+.. include:: mpfs_design_hss.rst
+
+Custom boot-flow
+~~~~~~~~~~~~~~~~
+
+HSS without OpenSBI (M-Mode) -> OpenSBI (M-Mode) -> U-Boot (S-Mode) -> Linux (S-Mode)
+
+Build OpenSBI
+'''''''''''''
+
+1. Get the OpenSBI source
+
+.. code-block:: none
+
+   git clone https://github.com/riscv/opensbi.git
+   cd opensbi
+
+2. Build
+
+.. code-block:: none
+
+   make PLATFORM=generic FW_PAYLOAD_PATH=<u-boot-directory>/u-boot.bin
+   FW_FDT_PATH=<u-boot-directory>/dts/upstream/src/riscv/microchip/mpfs-sev-kit-.dtb
+
+3. Output "fw_payload.bin" file available at
+   "<opensbi-directory>/build/platform/generic/firmware/fw_payload.bin"
+
+Build the HSS (Hart Software Services)- Custom boot-flow
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+(Note: HSS git repo is at https://github.com/polarfire-soc/hart-software-services)
+
+1. Configure
+
+.. code-block:: none
+
+   make BOARD=mpfs-video-kit config
+
+Alternatively, copy the default custom config for Custom boot-flow.
+
+.. code-block:: none
+
+   cp boards/mpfs-video-kit/def_config_custom .config
+
+2. make BOARD=mpfs-video-kit
+3. In the Default subdirectory, the standard build will create hss.elf and
+   various binary formats (hss.hex and hss.bin).
+
+The FPGA design will use the hss.hex or hss.bin.
+
+.. include:: mpfs_common.rst