ARM: dts: meson8b: odroidc1: mark the SD card detection GPIO active-low

After commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device
tree") SD cards are not detected anymore.

The CD GPIO is "active low" on Odroid-C1. The MMC dt-bindings specify:
"[...] using the "cd-inverted" property means, that the CD line is active
high, i.e. it is high, when a card is inserted".

Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and
drop the "cd-inverted" property. This makes the definition consistent
with the existing dt-bindings and fixes the check whether an SD card is
inserted.

Fixes: e03efbce6bebf5 ("ARM: dts: meson8b-odroidc1: add microSD support")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index a951a6632d0c7d3de2d1bd64c7383f06ed9f16c4..0f0a46ddf3ff2e9d3fa8148803d01d5b28897e1b 100644 (file)
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -272,8 +272,7 @@
                cap-sd-highspeed;
                disable-wp;
 
-               cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-               cd-inverted;
+               cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
                vmmc-supply = <&tflash_vdd>;
                vqmmc-supply = <&tf_io>;