--- /dev/null
+From 6d6e54fc71ad1ab0a87047fd9c211e75d86084a3 Mon Sep 17 00:00:00 2001
+From: Chun-Yi Lee <joeyli.kernel@gmail.com>
+Date: Wed, 2 Oct 2024 11:54:58 +0800
+Subject: aoe: fix the potential use-after-free problem in more places
+
+From: Chun-Yi Lee <joeyli.kernel@gmail.com>
+
+commit 6d6e54fc71ad1ab0a87047fd9c211e75d86084a3 upstream.
+
+For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential
+use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put()
+instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs
+into use-after-free.
+
+Then Nicolai Stange found more places in aoe have potential use-after-free
+problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe()
+and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push
+packet to tx queue. So they should also use dev_hold() to increase the
+refcnt of skb->dev.
+
+On the other hand, moving dev_put() to tx() causes that the refcnt of
+skb->dev be reduced to a negative value, because corresponding
+dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(),
+probe(), and aoecmd_cfg_rsp(). This patch fixed this issue.
+
+Cc: stable@vger.kernel.org
+Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270
+Fixes: f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts")
+Reported-by: Nicolai Stange <nstange@suse.com>
+Signed-off-by: Chun-Yi Lee <jlee@suse.com>
+Link: https://lore.kernel.org/stable/20240624064418.27043-1-jlee%40suse.com
+Link: https://lore.kernel.org/r/20241002035458.24401-1-jlee@suse.com
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/block/aoe/aoecmd.c | 13 ++++++++++++-
+ 1 file changed, 12 insertions(+), 1 deletion(-)
+
+--- a/drivers/block/aoe/aoecmd.c
++++ b/drivers/block/aoe/aoecmd.c
+@@ -361,6 +361,7 @@ ata_rw_frameinit(struct frame *f)
+ }
+
+ ah->cmdstat = ATA_CMD_PIO_READ | writebit | extbit;
++ dev_hold(t->ifp->nd);
+ skb->dev = t->ifp->nd;
+ }
+
+@@ -401,6 +402,8 @@ aoecmd_ata_rw(struct aoedev *d)
+ __skb_queue_head_init(&queue);
+ __skb_queue_tail(&queue, skb);
+ aoenet_xmit(&queue);
++ } else {
++ dev_put(f->t->ifp->nd);
+ }
+ return 1;
+ }
+@@ -483,10 +486,13 @@ resend(struct aoedev *d, struct frame *f
+ memcpy(h->dst, t->addr, sizeof h->dst);
+ memcpy(h->src, t->ifp->nd->dev_addr, sizeof h->src);
+
++ dev_hold(t->ifp->nd);
+ skb->dev = t->ifp->nd;
+ skb = skb_clone(skb, GFP_ATOMIC);
+- if (skb == NULL)
++ if (skb == NULL) {
++ dev_put(t->ifp->nd);
+ return;
++ }
+ f->sent = ktime_get();
+ __skb_queue_head_init(&queue);
+ __skb_queue_tail(&queue, skb);
+@@ -617,6 +623,8 @@ probe(struct aoetgt *t)
+ __skb_queue_head_init(&queue);
+ __skb_queue_tail(&queue, skb);
+ aoenet_xmit(&queue);
++ } else {
++ dev_put(f->t->ifp->nd);
+ }
+ }
+
+@@ -1395,6 +1403,7 @@ aoecmd_ata_id(struct aoedev *d)
+ ah->cmdstat = ATA_CMD_ID_ATA;
+ ah->lba3 = 0xa0;
+
++ dev_hold(t->ifp->nd);
+ skb->dev = t->ifp->nd;
+
+ d->rttavg = RTTAVG_INIT;
+@@ -1404,6 +1413,8 @@ aoecmd_ata_id(struct aoedev *d)
+ skb = skb_clone(skb, GFP_ATOMIC);
+ if (skb)
+ f->sent = ktime_get();
++ else
++ dev_put(t->ifp->nd);
+
+ return skb;
+ }
--- /dev/null
+From da6ef2dffe6056aad3435e6cf7c6471c2a62187c Mon Sep 17 00:00:00 2001
+From: Baokun Li <libaokun1@huawei.com>
+Date: Thu, 29 Aug 2024 16:34:09 +0800
+Subject: cachefiles: fix dentry leak in cachefiles_open_file()
+
+From: Baokun Li <libaokun1@huawei.com>
+
+commit da6ef2dffe6056aad3435e6cf7c6471c2a62187c upstream.
+
+A dentry leak may be caused when a lookup cookie and a cull are concurrent:
+
+ P1 | P2
+-----------------------------------------------------------
+cachefiles_lookup_cookie
+ cachefiles_look_up_object
+ lookup_one_positive_unlocked
+ // get dentry
+ cachefiles_cull
+ inode->i_flags |= S_KERNEL_FILE;
+ cachefiles_open_file
+ cachefiles_mark_inode_in_use
+ __cachefiles_mark_inode_in_use
+ can_use = false
+ if (!(inode->i_flags & S_KERNEL_FILE))
+ can_use = true
+ return false
+ return false
+ // Returns an error but doesn't put dentry
+
+After that the following WARNING will be triggered when the backend folder
+is umounted:
+
+==================================================================
+BUG: Dentry 000000008ad87947{i=7a,n=Dx_1_1.img} still in use (1) [unmount of ext4 sda]
+WARNING: CPU: 4 PID: 359261 at fs/dcache.c:1767 umount_check+0x5d/0x70
+CPU: 4 PID: 359261 Comm: umount Not tainted 6.6.0-dirty #25
+RIP: 0010:umount_check+0x5d/0x70
+Call Trace:
+ <TASK>
+ d_walk+0xda/0x2b0
+ do_one_tree+0x20/0x40
+ shrink_dcache_for_umount+0x2c/0x90
+ generic_shutdown_super+0x20/0x160
+ kill_block_super+0x1a/0x40
+ ext4_kill_sb+0x22/0x40
+ deactivate_locked_super+0x35/0x80
+ cleanup_mnt+0x104/0x160
+==================================================================
+
+Whether cachefiles_open_file() returns true or false, the reference count
+obtained by lookup_positive_unlocked() in cachefiles_look_up_object()
+should be released.
+
+Therefore release that reference count in cachefiles_look_up_object() to
+fix the above issue and simplify the code.
+
+Fixes: 1f08c925e7a3 ("cachefiles: Implement backing file wrangling")
+Cc: stable@kernel.org
+Signed-off-by: Baokun Li <libaokun1@huawei.com>
+Link: https://lore.kernel.org/r/20240829083409.3788142-1-libaokun@huaweicloud.com
+Acked-by: David Howells <dhowells@redhat.com>
+Signed-off-by: Christian Brauner <brauner@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ fs/cachefiles/namei.c | 7 +++----
+ 1 file changed, 3 insertions(+), 4 deletions(-)
+
+--- a/fs/cachefiles/namei.c
++++ b/fs/cachefiles/namei.c
+@@ -593,14 +593,12 @@ static bool cachefiles_open_file(struct
+ * write and readdir but not lookup or open).
+ */
+ touch_atime(&file->f_path);
+- dput(dentry);
+ return true;
+
+ check_failed:
+ fscache_cookie_lookup_negative(object->cookie);
+ cachefiles_unmark_inode_in_use(object, file);
+ fput(file);
+- dput(dentry);
+ if (ret == -ESTALE)
+ return cachefiles_create_file(object);
+ return false;
+@@ -609,7 +607,6 @@ error_fput:
+ fput(file);
+ error:
+ cachefiles_do_unmark_inode_in_use(object, d_inode(dentry));
+- dput(dentry);
+ return false;
+ }
+
+@@ -652,7 +649,9 @@ bool cachefiles_look_up_object(struct ca
+ goto new_file;
+ }
+
+- if (!cachefiles_open_file(object, dentry))
++ ret = cachefiles_open_file(object, dentry);
++ dput(dentry);
++ if (!ret)
+ return false;
+
+ _leave(" = t [%lu]", file_inode(object->file)->i_ino);
--- /dev/null
+From fff617979f97c773aaa9432c31cf62444b3bdbd4 Mon Sep 17 00:00:00 2001
+From: Ajit Pandey <quic_ajipan@quicinc.com>
+Date: Tue, 11 Jun 2024 19:07:45 +0530
+Subject: clk: qcom: clk-alpha-pll: Fix CAL_L_VAL override for LUCID EVO PLL
+
+From: Ajit Pandey <quic_ajipan@quicinc.com>
+
+commit fff617979f97c773aaa9432c31cf62444b3bdbd4 upstream.
+
+In LUCID EVO PLL CAL_L_VAL and L_VAL bitfields are part of single
+PLL_L_VAL register. Update for L_VAL bitfield values in PLL_L_VAL
+register using regmap_write() API in __alpha_pll_trion_set_rate
+callback will override LUCID EVO PLL initial configuration related
+to PLL_CAL_L_VAL bit fields in PLL_L_VAL register.
+
+Observed random PLL lock failures during PLL enable due to such
+override in PLL calibration value. Use regmap_update_bits() with
+L_VAL bitfield mask instead of regmap_write() API to update only
+PLL_L_VAL bitfields in __alpha_pll_trion_set_rate callback.
+
+Fixes: 260e36606a03 ("clk: qcom: clk-alpha-pll: add Lucid EVO PLL configuration interfaces")
+Cc: stable@vger.kernel.org
+Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
+Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+Acked-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+Link: https://lore.kernel.org/r/20240611133752.2192401-2-quic_ajipan@quicinc.com
+Signed-off-by: Bjorn Andersson <andersson@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/clk/qcom/clk-alpha-pll.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/clk/qcom/clk-alpha-pll.c
++++ b/drivers/clk/qcom/clk-alpha-pll.c
+@@ -1581,7 +1581,7 @@ static int __alpha_pll_trion_set_rate(st
+ if (ret < 0)
+ return ret;
+
+- regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
++ regmap_update_bits(pll->clkr.regmap, PLL_L_VAL(pll), LUCID_EVO_PLL_L_VAL_MASK, l);
+ regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
+
+ /* Latch the PLL input */
--- /dev/null
+From a4e5af27e6f6a8b0d14bc0d7eb04f4a6c7291586 Mon Sep 17 00:00:00 2001
+From: Mike Tipton <quic_mdtipton@quicinc.com>
+Date: Fri, 9 Aug 2024 10:51:29 +0530
+Subject: clk: qcom: clk-rpmh: Fix overflow in BCM vote
+
+From: Mike Tipton <quic_mdtipton@quicinc.com>
+
+commit a4e5af27e6f6a8b0d14bc0d7eb04f4a6c7291586 upstream.
+
+Valid frequencies may result in BCM votes that exceed the max HW value.
+Set vote ceiling to BCM_TCS_CMD_VOTE_MASK to ensure the votes aren't
+truncated, which can result in lower frequencies than desired.
+
+Fixes: 04053f4d23a4 ("clk: qcom: clk-rpmh: Add IPA clock support")
+Cc: stable@vger.kernel.org
+Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
+Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
+Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
+Link: https://lore.kernel.org/r/20240809-clk-rpmh-bcm-vote-fix-v2-1-240c584b7ef9@quicinc.com
+Signed-off-by: Bjorn Andersson <andersson@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/clk/qcom/clk-rpmh.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/clk/qcom/clk-rpmh.c
++++ b/drivers/clk/qcom/clk-rpmh.c
+@@ -266,6 +266,8 @@ static int clk_rpmh_bcm_send_cmd(struct
+ cmd_state = 0;
+ }
+
++ cmd_state = min(cmd_state, BCM_TCS_CMD_VOTE_MASK);
++
+ if (c->last_sent_aggr_state != cmd_state) {
+ cmd.addr = c->res_addr;
+ cmd.data = BCM_TCS_CMD(1, enable, 0, cmd_state);
--- /dev/null
+From 0e93c6320ecde0583de09f3fe801ce8822886fec Mon Sep 17 00:00:00 2001
+From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+Date: Sun, 4 Aug 2024 08:40:05 +0300
+Subject: clk: qcom: dispcc-sm8250: use CLK_SET_RATE_PARENT for branch clocks
+
+From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+commit 0e93c6320ecde0583de09f3fe801ce8822886fec upstream.
+
+Add CLK_SET_RATE_PARENT for several branch clocks. Such clocks don't
+have a way to change the rate, so set the parent rate instead.
+
+Fixes: 80a18f4a8567 ("clk: qcom: Add display clock controller driver for SM8150 and SM8250")
+Cc: stable@vger.kernel.org
+Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-1-1149dd8399fe@linaro.org
+Signed-off-by: Bjorn Andersson <andersson@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/clk/qcom/dispcc-sm8250.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/clk/qcom/dispcc-sm8250.c
++++ b/drivers/clk/qcom/dispcc-sm8250.c
+@@ -837,6 +837,7 @@ static struct clk_branch disp_cc_mdss_dp
+ &disp_cc_mdss_dp_link1_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
++ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+@@ -872,6 +873,7 @@ static struct clk_branch disp_cc_mdss_dp
+ &disp_cc_mdss_dp_link_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
++ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+@@ -997,6 +999,7 @@ static struct clk_branch disp_cc_mdss_md
+ &disp_cc_mdss_mdp_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
++ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
--- /dev/null
+From b8acaf2de8081371761ab4cf1e7a8ee4e7acc139 Mon Sep 17 00:00:00 2001
+From: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
+Date: Mon, 12 Aug 2024 10:43:04 +0530
+Subject: clk: qcom: gcc-sc8180x: Fix the sdcc2 and sdcc4 clocks freq table
+
+From: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
+
+commit b8acaf2de8081371761ab4cf1e7a8ee4e7acc139 upstream.
+
+Update the frequency tables of gcc_sdcc2_apps_clk and gcc_sdcc4_apps_clk
+as per the latest frequency plan.
+
+Fixes: 4433594bbe5d ("clk: qcom: gcc: Add global clock controller driver for SC8180x")
+Cc: stable@vger.kernel.org
+Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
+Link: https://lore.kernel.org/r/20240812-gcc-sc8180x-fixes-v2-4-8b3eaa5fb856@quicinc.com
+Signed-off-by: Bjorn Andersson <andersson@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/clk/qcom/gcc-sc8180x.c | 5 ++---
+ 1 file changed, 2 insertions(+), 3 deletions(-)
+
+--- a/drivers/clk/qcom/gcc-sc8180x.c
++++ b/drivers/clk/qcom/gcc-sc8180x.c
+@@ -895,7 +895,7 @@ static const struct freq_tbl ftbl_gcc_sd
+ F(25000000, P_GPLL0_OUT_MAIN, 12, 1, 2),
+ F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0),
+ F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+- F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
++ F(202000000, P_GPLL9_OUT_MAIN, 4, 0, 0),
+ { }
+ };
+
+@@ -918,9 +918,8 @@ static const struct freq_tbl ftbl_gcc_sd
+ F(400000, P_BI_TCXO, 12, 1, 4),
+ F(9600000, P_BI_TCXO, 2, 0, 0),
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+- F(37500000, P_GPLL0_OUT_MAIN, 16, 0, 0),
+ F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0),
+- F(75000000, P_GPLL0_OUT_MAIN, 8, 0, 0),
++ F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+ { }
+ };
+
--- /dev/null
+From bab0c7a0bc586e736b7cd2aac8e6391709a70ef2 Mon Sep 17 00:00:00 2001
+From: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
+Date: Mon, 12 Aug 2024 10:43:05 +0530
+Subject: clk: qcom: gcc-sm8150: De-register gcc_cpuss_ahb_clk_src
+
+From: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
+
+commit bab0c7a0bc586e736b7cd2aac8e6391709a70ef2 upstream.
+
+The branch clocks of gcc_cpuss_ahb_clk_src are marked critical
+and hence these clocks vote on XO blocking the suspend.
+De-register these clocks and its source as there is no rate
+setting happening on them.
+
+Fixes: 4433594bbe5d ("clk: qcom: gcc: Add global clock controller driver for SC8180x")
+Cc: stable@vger.kernel.org
+Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
+Link: https://lore.kernel.org/r/20240812-gcc-sc8180x-fixes-v2-5-8b3eaa5fb856@quicinc.com
+Signed-off-by: Bjorn Andersson <andersson@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/clk/qcom/gcc-sc8180x.c | 63 -----------------------------------------
+ 1 file changed, 63 deletions(-)
+
+--- a/drivers/clk/qcom/gcc-sc8180x.c
++++ b/drivers/clk/qcom/gcc-sc8180x.c
+@@ -261,28 +261,6 @@ static const struct clk_parent_data gcc_
+ { .hw = &gpll0_out_even.clkr.hw },
+ };
+
+-static const struct freq_tbl ftbl_gcc_cpuss_ahb_clk_src[] = {
+- F(19200000, P_BI_TCXO, 1, 0, 0),
+- F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0),
+- F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+- { }
+-};
+-
+-static struct clk_rcg2 gcc_cpuss_ahb_clk_src = {
+- .cmd_rcgr = 0x48014,
+- .mnd_width = 0,
+- .hid_width = 5,
+- .parent_map = gcc_parent_map_0,
+- .freq_tbl = ftbl_gcc_cpuss_ahb_clk_src,
+- .clkr.hw.init = &(struct clk_init_data){
+- .name = "gcc_cpuss_ahb_clk_src",
+- .parent_data = gcc_parents_0,
+- .num_parents = ARRAY_SIZE(gcc_parents_0),
+- .flags = CLK_SET_RATE_PARENT,
+- .ops = &clk_rcg2_ops,
+- },
+-};
+-
+ static const struct freq_tbl ftbl_gcc_emac_ptp_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+@@ -1600,25 +1578,6 @@ static struct clk_branch gcc_cfg_noc_usb
+ },
+ };
+
+-/* For CPUSS functionality the AHB clock needs to be left enabled */
+-static struct clk_branch gcc_cpuss_ahb_clk = {
+- .halt_reg = 0x48000,
+- .halt_check = BRANCH_HALT_VOTED,
+- .clkr = {
+- .enable_reg = 0x52004,
+- .enable_mask = BIT(21),
+- .hw.init = &(struct clk_init_data){
+- .name = "gcc_cpuss_ahb_clk",
+- .parent_hws = (const struct clk_hw *[]){
+- &gcc_cpuss_ahb_clk_src.clkr.hw
+- },
+- .num_parents = 1,
+- .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
+- .ops = &clk_branch2_ops,
+- },
+- },
+-};
+-
+ static struct clk_branch gcc_cpuss_rbcpr_clk = {
+ .halt_reg = 0x48008,
+ .halt_check = BRANCH_HALT,
+@@ -3151,25 +3110,6 @@ static struct clk_branch gcc_sdcc4_apps_
+ },
+ };
+
+-/* For CPUSS functionality the SYS NOC clock needs to be left enabled */
+-static struct clk_branch gcc_sys_noc_cpuss_ahb_clk = {
+- .halt_reg = 0x4819c,
+- .halt_check = BRANCH_HALT_VOTED,
+- .clkr = {
+- .enable_reg = 0x52004,
+- .enable_mask = BIT(0),
+- .hw.init = &(struct clk_init_data){
+- .name = "gcc_sys_noc_cpuss_ahb_clk",
+- .parent_hws = (const struct clk_hw *[]){
+- &gcc_cpuss_ahb_clk_src.clkr.hw
+- },
+- .num_parents = 1,
+- .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
+- .ops = &clk_branch2_ops,
+- },
+- },
+-};
+-
+ static struct clk_branch gcc_tsif_ahb_clk = {
+ .halt_reg = 0x36004,
+ .halt_check = BRANCH_HALT,
+@@ -4259,8 +4199,6 @@ static struct clk_regmap *gcc_sc8180x_cl
+ [GCC_CFG_NOC_USB3_MP_AXI_CLK] = &gcc_cfg_noc_usb3_mp_axi_clk.clkr,
+ [GCC_CFG_NOC_USB3_PRIM_AXI_CLK] = &gcc_cfg_noc_usb3_prim_axi_clk.clkr,
+ [GCC_CFG_NOC_USB3_SEC_AXI_CLK] = &gcc_cfg_noc_usb3_sec_axi_clk.clkr,
+- [GCC_CPUSS_AHB_CLK] = &gcc_cpuss_ahb_clk.clkr,
+- [GCC_CPUSS_AHB_CLK_SRC] = &gcc_cpuss_ahb_clk_src.clkr,
+ [GCC_CPUSS_RBCPR_CLK] = &gcc_cpuss_rbcpr_clk.clkr,
+ [GCC_DDRSS_GPU_AXI_CLK] = &gcc_ddrss_gpu_axi_clk.clkr,
+ [GCC_DISP_HF_AXI_CLK] = &gcc_disp_hf_axi_clk.clkr,
+@@ -4397,7 +4335,6 @@ static struct clk_regmap *gcc_sc8180x_cl
+ [GCC_SDCC4_AHB_CLK] = &gcc_sdcc4_ahb_clk.clkr,
+ [GCC_SDCC4_APPS_CLK] = &gcc_sdcc4_apps_clk.clkr,
+ [GCC_SDCC4_APPS_CLK_SRC] = &gcc_sdcc4_apps_clk_src.clkr,
+- [GCC_SYS_NOC_CPUSS_AHB_CLK] = &gcc_sys_noc_cpuss_ahb_clk.clkr,
+ [GCC_TSIF_AHB_CLK] = &gcc_tsif_ahb_clk.clkr,
+ [GCC_TSIF_INACTIVITY_TIMERS_CLK] = &gcc_tsif_inactivity_timers_clk.clkr,
+ [GCC_TSIF_REF_CLK] = &gcc_tsif_ref_clk.clkr,
--- /dev/null
+From ade508b545c969c72cd68479f275a5dd640fd8b9 Mon Sep 17 00:00:00 2001
+From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+Date: Fri, 19 Jul 2024 19:12:38 +0530
+Subject: clk: qcom: gcc-sm8250: Do not turn off PCIe GDSCs during gdsc_disable()
+
+From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+commit ade508b545c969c72cd68479f275a5dd640fd8b9 upstream.
+
+With PWRSTS_OFF_ON, PCIe GDSCs are turned off during gdsc_disable(). This
+can happen during scenarios such as system suspend and breaks the resume
+of PCIe controllers from suspend.
+
+So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs
+during gdsc_disable() and allow the hardware to transition the GDSCs to
+retention when the parent domain enters low power state during system
+suspend.
+
+Cc: stable@vger.kernel.org # 5.7
+Fixes: 3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250")
+Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+Link: https://lore.kernel.org/r/20240719134238.312191-1-manivannan.sadhasivam@linaro.org
+Signed-off-by: Bjorn Andersson <andersson@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/clk/qcom/gcc-sm8250.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/drivers/clk/qcom/gcc-sm8250.c
++++ b/drivers/clk/qcom/gcc-sm8250.c
+@@ -3228,7 +3228,7 @@ static struct gdsc pcie_0_gdsc = {
+ .pd = {
+ .name = "pcie_0_gdsc",
+ },
+- .pwrsts = PWRSTS_OFF_ON,
++ .pwrsts = PWRSTS_RET_ON,
+ };
+
+ static struct gdsc pcie_1_gdsc = {
+@@ -3236,7 +3236,7 @@ static struct gdsc pcie_1_gdsc = {
+ .pd = {
+ .name = "pcie_1_gdsc",
+ },
+- .pwrsts = PWRSTS_OFF_ON,
++ .pwrsts = PWRSTS_RET_ON,
+ };
+
+ static struct gdsc pcie_2_gdsc = {
+@@ -3244,7 +3244,7 @@ static struct gdsc pcie_2_gdsc = {
+ .pd = {
+ .name = "pcie_2_gdsc",
+ },
+- .pwrsts = PWRSTS_OFF_ON,
++ .pwrsts = PWRSTS_RET_ON,
+ };
+
+ static struct gdsc ufs_card_gdsc = {
--- /dev/null
+From 889e1332310656961855c0dcedbb4dbe78e39d22 Mon Sep 17 00:00:00 2001
+From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+Date: Mon, 22 Jul 2024 16:27:33 +0530
+Subject: clk: qcom: gcc-sm8450: Do not turn off PCIe GDSCs during gdsc_disable()
+
+From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+commit 889e1332310656961855c0dcedbb4dbe78e39d22 upstream.
+
+With PWRSTS_OFF_ON, PCIe GDSCs are turned off during gdsc_disable(). This
+can happen during scenarios such as system suspend and breaks the resume
+of PCIe controllers from suspend.
+
+So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs
+during gdsc_disable() and allow the hardware to transition the GDSCs to
+retention when the parent domain enters low power state during system
+suspend.
+
+Cc: stable@vger.kernel.org # 5.17
+Fixes: db0c944ee92b ("clk: qcom: Add clock driver for SM8450")
+Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+Link: https://lore.kernel.org/r/20240722105733.13040-1-manivannan.sadhasivam@linaro.org
+Signed-off-by: Bjorn Andersson <andersson@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/clk/qcom/gcc-sm8450.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/clk/qcom/gcc-sm8450.c
++++ b/drivers/clk/qcom/gcc-sm8450.c
+@@ -2934,7 +2934,7 @@ static struct gdsc pcie_0_gdsc = {
+ .pd = {
+ .name = "pcie_0_gdsc",
+ },
+- .pwrsts = PWRSTS_OFF_ON,
++ .pwrsts = PWRSTS_RET_ON,
+ };
+
+ static struct gdsc pcie_1_gdsc = {
+@@ -2942,7 +2942,7 @@ static struct gdsc pcie_1_gdsc = {
+ .pd = {
+ .name = "pcie_1_gdsc",
+ },
+- .pwrsts = PWRSTS_OFF_ON,
++ .pwrsts = PWRSTS_RET_ON,
+ };
+
+ static struct gdsc ufs_phy_gdsc = {
--- /dev/null
+From 12fd64babaca4dc09d072f63eda76ba44119816a Mon Sep 17 00:00:00 2001
+From: Sebastian Reichel <sebastian.reichel@collabora.com>
+Date: Mon, 25 Mar 2024 20:33:36 +0100
+Subject: clk: rockchip: fix error for unknown clocks
+
+From: Sebastian Reichel <sebastian.reichel@collabora.com>
+
+commit 12fd64babaca4dc09d072f63eda76ba44119816a upstream.
+
+There is a clk == NULL check after the switch to check for
+unsupported clk types. Since clk is re-assigned in a loop,
+this check is useless right now for anything but the first
+round. Let's fix this up by assigning clk = NULL in the
+loop before the switch statement.
+
+Fixes: a245fecbb806 ("clk: rockchip: add basic infrastructure for clock branches")
+Cc: stable@vger.kernel.org
+Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
+[added fixes + stable-cc]
+Link: https://lore.kernel.org/r/20240325193609.237182-6-sebastian.reichel@collabora.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/clk/rockchip/clk.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/clk/rockchip/clk.c
++++ b/drivers/clk/rockchip/clk.c
+@@ -438,12 +438,13 @@ void rockchip_clk_register_branches(stru
+ struct rockchip_clk_branch *list,
+ unsigned int nr_clk)
+ {
+- struct clk *clk = NULL;
++ struct clk *clk;
+ unsigned int idx;
+ unsigned long flags;
+
+ for (idx = 0; idx < nr_clk; idx++, list++) {
+ flags = list->flags;
++ clk = NULL;
+
+ /* catch simple muxes */
+ switch (list->branch_type) {
--- /dev/null
+From a1e40ac5b5e9077fe1f7ae0eb88034db0f9ae1ab Mon Sep 17 00:00:00 2001
+From: Willem de Bruijn <willemb@google.com>
+Date: Tue, 1 Oct 2024 13:17:46 -0400
+Subject: gso: fix udp gso fraglist segmentation after pull from frag_list
+
+From: Willem de Bruijn <willemb@google.com>
+
+commit a1e40ac5b5e9077fe1f7ae0eb88034db0f9ae1ab upstream.
+
+Detect gso fraglist skbs with corrupted geometry (see below) and
+pass these to skb_segment instead of skb_segment_list, as the first
+can segment them correctly.
+
+Valid SKB_GSO_FRAGLIST skbs
+- consist of two or more segments
+- the head_skb holds the protocol headers plus first gso_size
+- one or more frag_list skbs hold exactly one segment
+- all but the last must be gso_size
+
+Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can
+modify these skbs, breaking these invariants.
+
+In extreme cases they pull all data into skb linear. For UDP, this
+causes a NULL ptr deref in __udpv4_gso_segment_list_csum at
+udp_hdr(seg->next)->dest.
+
+Detect invalid geometry due to pull, by checking head_skb size.
+Don't just drop, as this may blackhole a destination. Convert to be
+able to pass to regular skb_segment.
+
+Link: https://lore.kernel.org/netdev/20240428142913.18666-1-shiming.cheng@mediatek.com/
+Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.")
+Signed-off-by: Willem de Bruijn <willemb@google.com>
+Cc: stable@vger.kernel.org
+Link: https://patch.msgid.link/20241001171752.107580-1-willemdebruijn.kernel@gmail.com
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ net/ipv4/udp_offload.c | 22 ++++++++++++++++++++--
+ 1 file changed, 20 insertions(+), 2 deletions(-)
+
+--- a/net/ipv4/udp_offload.c
++++ b/net/ipv4/udp_offload.c
+@@ -289,8 +289,26 @@ struct sk_buff *__udp_gso_segment(struct
+ return NULL;
+ }
+
+- if (skb_shinfo(gso_skb)->gso_type & SKB_GSO_FRAGLIST)
+- return __udp_gso_segment_list(gso_skb, features, is_ipv6);
++ if (skb_shinfo(gso_skb)->gso_type & SKB_GSO_FRAGLIST) {
++ /* Detect modified geometry and pass those to skb_segment. */
++ if (skb_pagelen(gso_skb) - sizeof(*uh) == skb_shinfo(gso_skb)->gso_size)
++ return __udp_gso_segment_list(gso_skb, features, is_ipv6);
++
++ /* Setup csum, as fraglist skips this in udp4_gro_receive. */
++ gso_skb->csum_start = skb_transport_header(gso_skb) - gso_skb->head;
++ gso_skb->csum_offset = offsetof(struct udphdr, check);
++ gso_skb->ip_summed = CHECKSUM_PARTIAL;
++
++ uh = udp_hdr(gso_skb);
++ if (is_ipv6)
++ uh->check = ~udp_v6_check(gso_skb->len,
++ &ipv6_hdr(gso_skb)->saddr,
++ &ipv6_hdr(gso_skb)->daddr, 0);
++ else
++ uh->check = ~udp_v4_check(gso_skb->len,
++ ip_hdr(gso_skb)->saddr,
++ ip_hdr(gso_skb)->daddr, 0);
++ }
+
+ skb_pull(gso_skb, sizeof(*uh));
+
--- /dev/null
+From 129464e86c7445a858b790ac2d28d35f58256bbe Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Barnab=C3=A1s=20Cz=C3=A9m=C3=A1n?=
+ <barnabas.czeman@mainlining.org>
+Date: Mon, 19 Aug 2024 00:29:40 +0200
+Subject: iio: magnetometer: ak8975: Fix reading for ak099xx sensors
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: Barnabás Czémán <barnabas.czeman@mainlining.org>
+
+commit 129464e86c7445a858b790ac2d28d35f58256bbe upstream.
+
+Move ST2 reading with overflow handling after measurement data
+reading.
+ST2 register read have to be read after read measurment data,
+because it means end of the reading and realease the lock on the data.
+Remove ST2 read skip on interrupt based waiting because ST2 required to
+be read out at and of the axis read.
+
+Fixes: 57e73a423b1e ("iio: ak8975: add ak09911 and ak09912 support")
+Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
+Link: https://patch.msgid.link/20240819-ak09918-v4-2-f0734d14cfb9@mainlining.org
+Cc: <Stable@vger.kernel.org>
+Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/iio/magnetometer/ak8975.c | 32 ++++++++++++++++----------------
+ 1 file changed, 16 insertions(+), 16 deletions(-)
+
+--- a/drivers/iio/magnetometer/ak8975.c
++++ b/drivers/iio/magnetometer/ak8975.c
+@@ -692,22 +692,8 @@ static int ak8975_start_read_axis(struct
+ if (ret < 0)
+ return ret;
+
+- /* This will be executed only for non-interrupt based waiting case */
+- if (ret & data->def->ctrl_masks[ST1_DRDY]) {
+- ret = i2c_smbus_read_byte_data(client,
+- data->def->ctrl_regs[ST2]);
+- if (ret < 0) {
+- dev_err(&client->dev, "Error in reading ST2\n");
+- return ret;
+- }
+- if (ret & (data->def->ctrl_masks[ST2_DERR] |
+- data->def->ctrl_masks[ST2_HOFL])) {
+- dev_err(&client->dev, "ST2 status error 0x%x\n", ret);
+- return -EINVAL;
+- }
+- }
+-
+- return 0;
++ /* Return with zero if the data is ready. */
++ return !data->def->ctrl_regs[ST1_DRDY];
+ }
+
+ /* Retrieve raw flux value for one of the x, y, or z axis. */
+@@ -734,6 +720,20 @@ static int ak8975_read_axis(struct iio_d
+ if (ret < 0)
+ goto exit;
+
++ /* Read out ST2 for release lock on measurment data. */
++ ret = i2c_smbus_read_byte_data(client, data->def->ctrl_regs[ST2]);
++ if (ret < 0) {
++ dev_err(&client->dev, "Error in reading ST2\n");
++ goto exit;
++ }
++
++ if (ret & (data->def->ctrl_masks[ST2_DERR] |
++ data->def->ctrl_masks[ST2_HOFL])) {
++ dev_err(&client->dev, "ST2 status error 0x%x\n", ret);
++ ret = -EINVAL;
++ goto exit;
++ }
++
+ mutex_unlock(&data->lock);
+
+ pm_runtime_mark_last_busy(&data->client->dev);
--- /dev/null
+From c684771630e64bc39bddffeb65dd8a6612a6b249 Mon Sep 17 00:00:00 2001
+From: Nuno Sa <nuno.sa@analog.com>
+Date: Tue, 1 Oct 2024 07:47:23 -0700
+Subject: Input: adp5589-keys - fix adp5589_gpio_get_value()
+
+From: Nuno Sa <nuno.sa@analog.com>
+
+commit c684771630e64bc39bddffeb65dd8a6612a6b249 upstream.
+
+The adp5589 seems to have the same behavior as similar devices as
+explained in commit 910a9f5636f5 ("Input: adp5588-keys - get value from
+data out when dir is out").
+
+Basically, when the gpio is set as output we need to get the value from
+ADP5589_GPO_DATA_OUT_A register instead of ADP5589_GPI_STATUS_A.
+
+Fixes: 9d2e173644bb ("Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander")
+Signed-off-by: Nuno Sa <nuno.sa@analog.com>
+Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-2-fca0149dfc47@analog.com
+Cc: stable@vger.kernel.org
+Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/input/keyboard/adp5589-keys.c | 13 ++++++++++---
+ 1 file changed, 10 insertions(+), 3 deletions(-)
+
+--- a/drivers/input/keyboard/adp5589-keys.c
++++ b/drivers/input/keyboard/adp5589-keys.c
+@@ -391,10 +391,17 @@ static int adp5589_gpio_get_value(struct
+ struct adp5589_kpad *kpad = gpiochip_get_data(chip);
+ unsigned int bank = kpad->var->bank(kpad->gpiomap[off]);
+ unsigned int bit = kpad->var->bit(kpad->gpiomap[off]);
++ int val;
+
+- return !!(adp5589_read(kpad->client,
+- kpad->var->reg(ADP5589_GPI_STATUS_A) + bank) &
+- bit);
++ mutex_lock(&kpad->gpio_lock);
++ if (kpad->dir[bank] & bit)
++ val = kpad->dat_out[bank];
++ else
++ val = adp5589_read(kpad->client,
++ kpad->var->reg(ADP5589_GPI_STATUS_A) + bank);
++ mutex_unlock(&kpad->gpio_lock);
++
++ return !!(val & bit);
+ }
+
+ static void adp5589_gpio_set_value(struct gpio_chip *chip,
--- /dev/null
+From fb5cc65f973661241e4a2b7390b429aa7b330c69 Mon Sep 17 00:00:00 2001
+From: Nuno Sa <nuno.sa@analog.com>
+Date: Tue, 1 Oct 2024 07:46:44 -0700
+Subject: Input: adp5589-keys - fix NULL pointer dereference
+
+From: Nuno Sa <nuno.sa@analog.com>
+
+commit fb5cc65f973661241e4a2b7390b429aa7b330c69 upstream.
+
+We register a devm action to call adp5589_clear_config() and then pass
+the i2c client as argument so that we can call i2c_get_clientdata() in
+order to get our device object. However, i2c_set_clientdata() is only
+being set at the end of the probe function which means that we'll get a
+NULL pointer dereference in case the probe function fails early.
+
+Fixes: 30df385e35a4 ("Input: adp5589-keys - use devm_add_action_or_reset() for register clear")
+Signed-off-by: Nuno Sa <nuno.sa@analog.com>
+Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-1-fca0149dfc47@analog.com
+Cc: stable@vger.kernel.org
+Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/input/keyboard/adp5589-keys.c | 9 +++------
+ 1 file changed, 3 insertions(+), 6 deletions(-)
+
+--- a/drivers/input/keyboard/adp5589-keys.c
++++ b/drivers/input/keyboard/adp5589-keys.c
+@@ -936,10 +936,9 @@ static int adp5589_keypad_add(struct adp
+
+ static void adp5589_clear_config(void *data)
+ {
+- struct i2c_client *client = data;
+- struct adp5589_kpad *kpad = i2c_get_clientdata(client);
++ struct adp5589_kpad *kpad = data;
+
+- adp5589_write(client, kpad->var->reg(ADP5589_GENERAL_CFG), 0);
++ adp5589_write(kpad->client, kpad->var->reg(ADP5589_GENERAL_CFG), 0);
+ }
+
+ static int adp5589_probe(struct i2c_client *client,
+@@ -983,7 +982,7 @@ static int adp5589_probe(struct i2c_clie
+ }
+
+ error = devm_add_action_or_reset(&client->dev, adp5589_clear_config,
+- client);
++ kpad);
+ if (error)
+ return error;
+
+@@ -1010,8 +1009,6 @@ static int adp5589_probe(struct i2c_clie
+ if (error)
+ return error;
+
+- i2c_set_clientdata(client, kpad);
+-
+ dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
+ return 0;
+ }
--- /dev/null
+From a151766bd3688f6803e706c6433a7c8d3c6a6a94 Mon Sep 17 00:00:00 2001
+From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+Date: Mon, 29 Jul 2024 13:42:03 +0100
+Subject: media: qcom: camss: Fix ordering of pm_runtime_enable
+
+From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+commit a151766bd3688f6803e706c6433a7c8d3c6a6a94 upstream.
+
+pm_runtime_enable() should happen prior to vfe_get() since vfe_get() calls
+pm_runtime_resume_and_get().
+
+This is a basic race condition that doesn't show up for most users so is
+not widely reported. If you blacklist qcom-camss in modules.d and then
+subsequently modprobe the module post-boot it is possible to reliably show
+this error up.
+
+The kernel log for this error looks like this:
+
+qcom-camss ac5a000.camss: Failed to power up pipeline: -13
+
+Fixes: 02afa816dbbf ("media: camss: Add basic runtime PM support")
+Reported-by: Johan Hovold <johan+linaro@kernel.org>
+Closes: https://lore.kernel.org/lkml/ZoVNHOTI0PKMNt4_@hovoldconsulting.com/
+Tested-by: Johan Hovold <johan+linaro@kernel.org>
+Cc: <stable@vger.kernel.org>
+Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/media/platform/qcom/camss/camss.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+--- a/drivers/media/platform/qcom/camss/camss.c
++++ b/drivers/media/platform/qcom/camss/camss.c
+@@ -1663,6 +1663,8 @@ static int camss_probe(struct platform_d
+
+ v4l2_async_nf_init(&camss->notifier);
+
++ pm_runtime_enable(dev);
++
+ num_subdevs = camss_of_parse_ports(camss);
+ if (num_subdevs < 0) {
+ ret = num_subdevs;
+@@ -1700,8 +1702,6 @@ static int camss_probe(struct platform_d
+ }
+ }
+
+- pm_runtime_enable(dev);
+-
+ return 0;
+
+ err_register_subdevs:
+@@ -1709,6 +1709,7 @@ err_register_subdevs:
+ err_v4l2_device_unregister:
+ v4l2_device_unregister(&camss->v4l2_dev);
+ v4l2_async_nf_cleanup(&camss->notifier);
++ pm_runtime_disable(dev);
+ err_genpd_cleanup:
+ camss_genpd_cleanup(camss);
+
--- /dev/null
+From 2dc5d5d401f5c6cecd97800ffef82e8d17d228f0 Mon Sep 17 00:00:00 2001
+From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+Date: Wed, 19 Jun 2024 02:46:16 +0300
+Subject: media: sun4i_csi: Implement link validate for sun4i_csi subdev
+
+From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+commit 2dc5d5d401f5c6cecd97800ffef82e8d17d228f0 upstream.
+
+The sun4i_csi driver doesn't implement link validation for the subdev it
+registers, leaving the link between the subdev and its source
+unvalidated. Fix it, using the v4l2_subdev_link_validate() helper.
+
+Fixes: 577bbf23b758 ("media: sunxi: Add A10 CSI driver")
+Cc: stable@vger.kernel.org
+Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+Acked-by: Chen-Yu Tsai <wens@csie.org>
+Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
+Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c
++++ b/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c
+@@ -40,6 +40,10 @@ static const struct media_entity_operati
+ .link_validate = v4l2_subdev_link_validate,
+ };
+
++static const struct media_entity_operations sun4i_csi_subdev_entity_ops = {
++ .link_validate = v4l2_subdev_link_validate,
++};
++
+ static int sun4i_csi_notify_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+@@ -214,6 +218,7 @@ static int sun4i_csi_probe(struct platfo
+ v4l2_subdev_init(subdev, &sun4i_csi_subdev_ops);
+ subdev->flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
+ subdev->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
++ subdev->entity.ops = &sun4i_csi_subdev_entity_ops;
+ subdev->owner = THIS_MODULE;
+ snprintf(subdev->name, sizeof(subdev->name), "sun4i-csi-0");
+ v4l2_set_subdevdata(subdev, csi);
--- /dev/null
+From 599f6899051cb70c4e0aa9fd591b9ee220cb6f14 Mon Sep 17 00:00:00 2001
+From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Date: Wed, 7 Aug 2024 09:22:10 +0200
+Subject: media: uapi/linux/cec.h: cec_msg_set_reply_to: zero flags
+
+From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+
+commit 599f6899051cb70c4e0aa9fd591b9ee220cb6f14 upstream.
+
+The cec_msg_set_reply_to() helper function never zeroed the
+struct cec_msg flags field, this can cause unexpected behavior
+if flags was uninitialized to begin with.
+
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Fixes: 0dbacebede1e ("[media] cec: move the CEC framework out of staging and to media")
+Cc: <stable@vger.kernel.org>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ include/uapi/linux/cec.h | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+--- a/include/uapi/linux/cec.h
++++ b/include/uapi/linux/cec.h
+@@ -132,6 +132,8 @@ static inline void cec_msg_init(struct c
+ * Set the msg destination to the orig initiator and the msg initiator to the
+ * orig destination. Note that msg and orig may be the same pointer, in which
+ * case the change is done in place.
++ *
++ * It also zeroes the reply, timeout and flags fields.
+ */
+ static inline void cec_msg_set_reply_to(struct cec_msg *msg,
+ struct cec_msg *orig)
+@@ -139,7 +141,9 @@ static inline void cec_msg_set_reply_to(
+ /* The destination becomes the initiator and vice versa */
+ msg->msg[0] = (cec_msg_destination(orig) << 4) |
+ cec_msg_initiator(orig);
+- msg->reply = msg->timeout = 0;
++ msg->reply = 0;
++ msg->timeout = 0;
++ msg->flags = 0;
+ }
+
+ /**
--- /dev/null
+From c5a85ed88e043474161bbfe54002c89c1cb50ee2 Mon Sep 17 00:00:00 2001
+From: Zheng Wang <zyytlz.wz@163.com>
+Date: Tue, 18 Jun 2024 14:55:59 +0530
+Subject: media: venus: fix use after free bug in venus_remove due to race condition
+
+From: Zheng Wang <zyytlz.wz@163.com>
+
+commit c5a85ed88e043474161bbfe54002c89c1cb50ee2 upstream.
+
+in venus_probe, core->work is bound with venus_sys_error_handler, which is
+used to handle error. The code use core->sys_err_done to make sync work.
+The core->work is started in venus_event_notify.
+
+If we call venus_remove, there might be an unfished work. The possible
+sequence is as follows:
+
+CPU0 CPU1
+
+ |venus_sys_error_handler
+venus_remove |
+hfi_destroy |
+venus_hfi_destroy |
+kfree(hdev); |
+ |hfi_reinit
+ |venus_hfi_queues_reinit
+ |//use hdev
+
+Fix it by canceling the work in venus_remove.
+
+Cc: stable@vger.kernel.org
+Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions")
+Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
+Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
+Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/media/platform/qcom/venus/core.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/media/platform/qcom/venus/core.c
++++ b/drivers/media/platform/qcom/venus/core.c
+@@ -423,6 +423,7 @@ static int venus_remove(struct platform_
+ struct device *dev = core->dev;
+ int ret;
+
++ cancel_delayed_work_sync(&core->work);
+ ret = pm_runtime_get_sync(dev);
+ WARN_ON(ret < 0);
+
--- /dev/null
+From 675faf5a14c14a2be0b870db30a70764df81e2df Mon Sep 17 00:00:00 2001
+From: KhaiWenTan <khai.wen.tan@linux.intel.com>
+Date: Wed, 18 Sep 2024 14:14:22 +0800
+Subject: net: stmmac: Fix zero-division error when disabling tc cbs
+
+From: KhaiWenTan <khai.wen.tan@linux.intel.com>
+
+commit 675faf5a14c14a2be0b870db30a70764df81e2df upstream.
+
+The commit b8c43360f6e4 ("net: stmmac: No need to calculate speed divider
+when offload is disabled") allows the "port_transmit_rate_kbps" to be
+set to a value of 0, which is then passed to the "div_s64" function when
+tc-cbs is disabled. This leads to a zero-division error.
+
+When tc-cbs is disabled, the idleslope, sendslope, and credit values the
+credit values are not required to be configured. Therefore, adding a return
+statement after setting the txQ mode to DCB when tc-cbs is disabled would
+prevent a zero-division error.
+
+Fixes: b8c43360f6e4 ("net: stmmac: No need to calculate speed divider when offload is disabled")
+Cc: <stable@vger.kernel.org>
+Co-developed-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
+Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
+Signed-off-by: KhaiWenTan <khai.wen.tan@linux.intel.com>
+Reviewed-by: Simon Horman <horms@kernel.org>
+Link: https://patch.msgid.link/20240918061422.1589662-1-khai.wen.tan@linux.intel.com
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+@@ -396,6 +396,7 @@ static int tc_setup_cbs(struct stmmac_pr
+ return ret;
+
+ priv->plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
++ return 0;
+ }
+
+ /* Final adjustments for HW */
--- /dev/null
+From 9ab27eb5866ccbf57715cfdba4b03d57776092fb Mon Sep 17 00:00:00 2001
+From: Jan Kiszka <jan.kiszka@siemens.com>
+Date: Mon, 19 Aug 2024 17:24:51 +0200
+Subject: remoteproc: k3-r5: Fix error handling when power-up failed
+
+From: Jan Kiszka <jan.kiszka@siemens.com>
+
+commit 9ab27eb5866ccbf57715cfdba4b03d57776092fb upstream.
+
+By simply bailing out, the driver was violating its rule and internal
+assumptions that either both or no rproc should be initialized. E.g.,
+this could cause the first core to be available but not the second one,
+leading to crashes on its shutdown later on while trying to dereference
+that second instance.
+
+Fixes: 61f6f68447ab ("remoteproc: k3-r5: Wait for core0 power-up before powering up core1")
+Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
+Acked-by: Beleswar Padhi <b-padhi@ti.com>
+Cc: stable@vger.kernel.org
+Link: https://lore.kernel.org/r/9f481156-f220-4adf-b3d9-670871351e26@siemens.com
+Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/remoteproc/ti_k3_r5_remoteproc.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/remoteproc/ti_k3_r5_remoteproc.c
++++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c
+@@ -1324,7 +1324,7 @@ init_rmem:
+ dev_err(dev,
+ "Timed out waiting for %s core to power up!\n",
+ rproc->name);
+- return ret;
++ goto err_powerup;
+ }
+ }
+
+@@ -1340,6 +1340,7 @@ err_split:
+ }
+ }
+
++err_powerup:
+ rproc_del(rproc);
+ err_add:
+ k3_r5_reserved_mem_exit(kproc);
--- /dev/null
+From 73580e2ee6adfb40276bd420da3bb1abae204e10 Mon Sep 17 00:00:00 2001
+From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Date: Sun, 25 Aug 2024 20:31:03 +0200
+Subject: rtc: at91sam9: fix OF node leak in probe() error path
+
+From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+commit 73580e2ee6adfb40276bd420da3bb1abae204e10 upstream.
+
+Driver is leaking an OF node reference obtained from
+of_parse_phandle_with_fixed_args().
+
+Fixes: 43e112bb3dea ("rtc: at91sam9: make use of syscon/regmap to access GPBR registers")
+Cc: stable@vger.kernel.org
+Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Link: https://lore.kernel.org/r/20240825183103.102904-1-krzysztof.kozlowski@linaro.org
+Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/rtc/rtc-at91sam9.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/rtc/rtc-at91sam9.c
++++ b/drivers/rtc/rtc-at91sam9.c
+@@ -368,6 +368,7 @@ static int at91_rtc_probe(struct platfor
+ return ret;
+
+ rtc->gpbr = syscon_node_to_regmap(args.np);
++ of_node_put(args.np);
+ rtc->gpbr_offset = args.args[0];
+ if (IS_ERR(rtc->gpbr)) {
+ dev_err(&pdev->dev, "failed to retrieve gpbr regmap, aborting.\n");
nfsd-fix-delegation_blocked-to-block-correctly-for-at-least-30-seconds.patch
nfsd-map-the-ebadmsg-to-nfserr_io-to-avoid-warning.patch
nfsd-fix-nfsv4-s-putpubfh-operation.patch
+aoe-fix-the-potential-use-after-free-problem-in-more-places.patch
+clk-rockchip-fix-error-for-unknown-clocks.patch
+remoteproc-k3-r5-fix-error-handling-when-power-up-failed.patch
+clk-qcom-dispcc-sm8250-use-clk_set_rate_parent-for-branch-clocks.patch
+media-sun4i_csi-implement-link-validate-for-sun4i_csi-subdev.patch
+clk-qcom-gcc-sm8450-do-not-turn-off-pcie-gdscs-during-gdsc_disable.patch
+media-uapi-linux-cec.h-cec_msg_set_reply_to-zero-flags.patch
+clk-qcom-clk-rpmh-fix-overflow-in-bcm-vote.patch
+clk-qcom-gcc-sm8150-de-register-gcc_cpuss_ahb_clk_src.patch
+media-venus-fix-use-after-free-bug-in-venus_remove-due-to-race-condition.patch
+clk-qcom-gcc-sm8250-do-not-turn-off-pcie-gdscs-during-gdsc_disable.patch
+media-qcom-camss-fix-ordering-of-pm_runtime_enable.patch
+clk-qcom-gcc-sc8180x-fix-the-sdcc2-and-sdcc4-clocks-freq-table.patch
+clk-qcom-clk-alpha-pll-fix-cal_l_val-override-for-lucid-evo-pll.patch
+smb-client-use-actual-path-when-queryfs.patch
+iio-magnetometer-ak8975-fix-reading-for-ak099xx-sensors.patch
+gso-fix-udp-gso-fraglist-segmentation-after-pull-from-frag_list.patch
+tomoyo-fallback-to-realpath-if-symlink-s-pathname-does-not-exist.patch
+net-stmmac-fix-zero-division-error-when-disabling-tc-cbs.patch
+rtc-at91sam9-fix-of-node-leak-in-probe-error-path.patch
+input-adp5589-keys-fix-null-pointer-dereference.patch
+input-adp5589-keys-fix-adp5589_gpio_get_value.patch
+cachefiles-fix-dentry-leak-in-cachefiles_open_file.patch
--- /dev/null
+From a421e3fe0e6abe27395078f4f0cec5daf466caea Mon Sep 17 00:00:00 2001
+From: wangrong <wangrong@uniontech.com>
+Date: Thu, 20 Jun 2024 16:37:29 +0800
+Subject: smb: client: use actual path when queryfs
+
+From: wangrong <wangrong@uniontech.com>
+
+commit a421e3fe0e6abe27395078f4f0cec5daf466caea upstream.
+
+Due to server permission control, the client does not have access to
+the shared root directory, but can access subdirectories normally, so
+users usually mount the shared subdirectories directly. In this case,
+queryfs should use the actual path instead of the root directory to
+avoid the call returning an error (EACCES).
+
+Signed-off-by: wangrong <wangrong@uniontech.com>
+Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Steve French <stfrench@microsoft.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ fs/smb/client/cifsfs.c | 13 ++++++++++++-
+ fs/smb/client/cifsglob.h | 2 +-
+ fs/smb/client/smb1ops.c | 2 +-
+ fs/smb/client/smb2ops.c | 19 ++++++++++++-------
+ 4 files changed, 26 insertions(+), 10 deletions(-)
+
+--- a/fs/smb/client/cifsfs.c
++++ b/fs/smb/client/cifsfs.c
+@@ -311,8 +311,17 @@ cifs_statfs(struct dentry *dentry, struc
+ struct TCP_Server_Info *server = tcon->ses->server;
+ unsigned int xid;
+ int rc = 0;
++ const char *full_path;
++ void *page;
+
+ xid = get_xid();
++ page = alloc_dentry_path();
++
++ full_path = build_path_from_dentry(dentry, page);
++ if (IS_ERR(full_path)) {
++ rc = PTR_ERR(full_path);
++ goto statfs_out;
++ }
+
+ if (le32_to_cpu(tcon->fsAttrInfo.MaxPathNameComponentLength) > 0)
+ buf->f_namelen =
+@@ -328,8 +337,10 @@ cifs_statfs(struct dentry *dentry, struc
+ buf->f_ffree = 0; /* unlimited */
+
+ if (server->ops->queryfs)
+- rc = server->ops->queryfs(xid, tcon, cifs_sb, buf);
++ rc = server->ops->queryfs(xid, tcon, full_path, cifs_sb, buf);
+
++statfs_out:
++ free_dentry_path(page);
+ free_xid(xid);
+ return rc;
+ }
+--- a/fs/smb/client/cifsglob.h
++++ b/fs/smb/client/cifsglob.h
+@@ -432,7 +432,7 @@ struct smb_version_operations {
+ __u16 net_fid, struct cifsInodeInfo *cifs_inode);
+ /* query remote filesystem */
+ int (*queryfs)(const unsigned int, struct cifs_tcon *,
+- struct cifs_sb_info *, struct kstatfs *);
++ const char *, struct cifs_sb_info *, struct kstatfs *);
+ /* send mandatory brlock to the server */
+ int (*mand_lock)(const unsigned int, struct cifsFileInfo *, __u64,
+ __u64, __u32, int, int, bool);
+--- a/fs/smb/client/smb1ops.c
++++ b/fs/smb/client/smb1ops.c
+@@ -906,7 +906,7 @@ cifs_oplock_response(struct cifs_tcon *t
+
+ static int
+ cifs_queryfs(const unsigned int xid, struct cifs_tcon *tcon,
+- struct cifs_sb_info *cifs_sb, struct kstatfs *buf)
++ const char *path, struct cifs_sb_info *cifs_sb, struct kstatfs *buf)
+ {
+ int rc = -EOPNOTSUPP;
+
+--- a/fs/smb/client/smb2ops.c
++++ b/fs/smb/client/smb2ops.c
+@@ -2677,7 +2677,7 @@ smb2_query_info_compound(const unsigned
+
+ static int
+ smb2_queryfs(const unsigned int xid, struct cifs_tcon *tcon,
+- struct cifs_sb_info *cifs_sb, struct kstatfs *buf)
++ const char *path, struct cifs_sb_info *cifs_sb, struct kstatfs *buf)
+ {
+ struct smb2_query_info_rsp *rsp;
+ struct smb2_fs_full_size_info *info = NULL;
+@@ -2686,7 +2686,7 @@ smb2_queryfs(const unsigned int xid, str
+ int rc;
+
+
+- rc = smb2_query_info_compound(xid, tcon, "",
++ rc = smb2_query_info_compound(xid, tcon, path,
+ FILE_READ_ATTRIBUTES,
+ FS_FULL_SIZE_INFORMATION,
+ SMB2_O_INFO_FILESYSTEM,
+@@ -2713,28 +2713,33 @@ qfs_exit:
+
+ static int
+ smb311_queryfs(const unsigned int xid, struct cifs_tcon *tcon,
+- struct cifs_sb_info *cifs_sb, struct kstatfs *buf)
++ const char *path, struct cifs_sb_info *cifs_sb, struct kstatfs *buf)
+ {
+ int rc;
+- __le16 srch_path = 0; /* Null - open root of share */
++ __le16 *utf16_path = NULL;
+ u8 oplock = SMB2_OPLOCK_LEVEL_NONE;
+ struct cifs_open_parms oparms;
+ struct cifs_fid fid;
+
+ if (!tcon->posix_extensions)
+- return smb2_queryfs(xid, tcon, cifs_sb, buf);
++ return smb2_queryfs(xid, tcon, path, cifs_sb, buf);
+
+ oparms = (struct cifs_open_parms) {
+ .tcon = tcon,
+- .path = "",
++ .path = path,
+ .desired_access = FILE_READ_ATTRIBUTES,
+ .disposition = FILE_OPEN,
+ .create_options = cifs_create_options(cifs_sb, 0),
+ .fid = &fid,
+ };
+
+- rc = SMB2_open(xid, &oparms, &srch_path, &oplock, NULL, NULL,
++ utf16_path = cifs_convert_path_to_utf16(path, cifs_sb);
++ if (utf16_path == NULL)
++ return -ENOMEM;
++
++ rc = SMB2_open(xid, &oparms, utf16_path, &oplock, NULL, NULL,
+ NULL, NULL);
++ kfree(utf16_path);
+ if (rc)
+ return rc;
+
--- /dev/null
+From ada1986d07976d60bed5017aa38b7f7cf27883f7 Mon Sep 17 00:00:00 2001
+From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
+Date: Wed, 25 Sep 2024 22:30:59 +0900
+Subject: tomoyo: fallback to realpath if symlink's pathname does not exist
+
+From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
+
+commit ada1986d07976d60bed5017aa38b7f7cf27883f7 upstream.
+
+Alfred Agrell found that TOMOYO cannot handle execveat(AT_EMPTY_PATH)
+inside chroot environment where /dev and /proc are not mounted, for
+commit 51f39a1f0cea ("syscalls: implement execveat() system call") missed
+that TOMOYO tries to canonicalize argv[0] when the filename fed to the
+executed program as argv[0] is supplied using potentially nonexistent
+pathname.
+
+Since "/dev/fd/<fd>" already lost symlink information used for obtaining
+that <fd>, it is too late to reconstruct symlink's pathname. Although
+<filename> part of "/dev/fd/<fd>/<filename>" might not be canonicalized,
+TOMOYO cannot use tomoyo_realpath_nofollow() when /dev or /proc is not
+mounted. Therefore, fallback to tomoyo_realpath_from_path() when
+tomoyo_realpath_nofollow() failed.
+
+Reported-by: Alfred Agrell <blubban@gmail.com>
+Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1082001
+Fixes: 51f39a1f0cea ("syscalls: implement execveat() system call")
+Cc: stable@vger.kernel.org # v3.19+
+Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ security/tomoyo/domain.c | 9 ++++++---
+ 1 file changed, 6 insertions(+), 3 deletions(-)
+
+--- a/security/tomoyo/domain.c
++++ b/security/tomoyo/domain.c
+@@ -723,10 +723,13 @@ int tomoyo_find_next_domain(struct linux
+ ee->r.obj = &ee->obj;
+ ee->obj.path1 = bprm->file->f_path;
+ /* Get symlink's pathname of program. */
+- retval = -ENOENT;
+ exename.name = tomoyo_realpath_nofollow(original_name);
+- if (!exename.name)
+- goto out;
++ if (!exename.name) {
++ /* Fallback to realpath if symlink's pathname does not exist. */
++ exename.name = tomoyo_realpath_from_path(&bprm->file->f_path);
++ if (!exename.name)
++ goto out;
++ }
+ tomoyo_fill_path_info(&exename);
+ retry:
+ /* Check 'aggregator' directive. */
projects / thirdparty / kernel / stable-queue.git / commitdiff
