<http://www.alphalinux.org/>. In summary:
Alcor/Alpha-XLT AS 600, AS 500, XL-300, XL-366
- Alpha-XL XL-233, XL-266
- AlphaBook1 Alpha laptop
- Avanti AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
- Cabriolet AlphaPC64, AlphaPCI64
DP264 DP264 / DS20 / ES40 / DS10 / DS10L
EB164 EB164 21164 evaluation board
- EB64+ EB64+ 21064 evaluation board
- EB66 EB66 21066 evaluation board
- EB66+ EB66+ 21066 evaluation board
LX164 AlphaPC164-LX
Miata Personal Workstation 433/500/600 a/au
Marvel AlphaServer ES47 / ES80 / GS1280
Mikasa AS 1000
- Noname AXPpci33, UDB (Multia)
Noritake AS 1000A, AS 600A, AS 800
PC164 AlphaPC164
Rawhide AS 1200, AS 4000, AS 4100
all the work required to support an external Bcache and to maintain
memory coherence when a PCI device DMAs into (or out of) memory.
-config ALPHA_XL
- bool "Alpha-XL"
- help
- XL-233 and XL-266-based Alpha systems.
-
-config ALPHA_BOOK1
- bool "AlphaBook1"
- help
- Dec AlphaBook1/Burns Alpha-based laptops.
-
-config ALPHA_AVANTI_CH
- bool "Avanti"
-
-config ALPHA_CABRIOLET
- bool "Cabriolet"
- help
- Cabriolet AlphaPC64, AlphaPCI64 systems. Derived from EB64+ but now
- baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
- slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
- Bcache SIMMs. Requires power supply with 3.3V output.
-
config ALPHA_DP264
bool "DP264"
help
MOUSE (PS2 style), RTC/NVRAM. Boot ROM is Flash. PC-AT-sized
motherboard. Requires power supply with 3.3V output.
-config ALPHA_EB64P_CH
- bool "EB64+"
-
-config ALPHA_EB66
- bool "EB66"
- help
- A Digital DS group board. Uses 21066 or 21066A. I/O sub-system is
- identical to EB64+. Baby PC-AT size. Runs from standard PC power
- supply. The EB66 schematic was published as a marketing poster
- advertising the 21066 as "the first microprocessor in the world with
- embedded PCI".
-
-config ALPHA_EB66P
- bool "EB66+"
- help
- Later variant of the EB66 board.
-
config ALPHA_EIGER
bool "Eiger"
help
help
Alpha systems based on the AMD 751 & ALI 1543C chipsets.
-config ALPHA_NONAME_CH
- bool "Noname"
-
config ALPHA_NORITAKE
bool "Noritake"
select HAVE_EISA
config ALPHA_PC164
bool "PC164"
-config ALPHA_P2K
- bool "Platform2000"
-
config ALPHA_RAWHIDE
bool "Rawhide"
select HAVE_EISA
bool
default y
-config ALPHA_NONAME
- bool
- depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
- default y
- help
- The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
- UDB). This design was produced by Digital's Technical OEM (TOEM)
- group. It uses the 21066 processor running at 166MHz or 233MHz. It
- is a baby-AT size, and runs from a standard PC power supply. It has
- 5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
- 2 versions, with either PS/2 or large DIN connectors for the
- keyboard.
-
config ALPHA_EV4
bool
- depends on ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
- default y
-
-config ALPHA_LCA
- bool
- depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
- default y
-
-config ALPHA_APECS
- bool
- depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
- default y
-
-config ALPHA_EB64P
- bool
- depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
- default y
- help
- Uses 21064 or 21064A and APECs. Has ISA and PCI expansion (3 ISA,
- 2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
- ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
- (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
- SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM. PC-AT size.
- Runs from standard PC power supply.
config ALPHA_EV5
bool
- default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
+ default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
config ALPHA_CIA
bool
- depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
+ depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
default y
config ALPHA_EV56
config ALPHA_EV56
prompt "EV56 CPU (speed >= 333MHz)?"
- depends on ALPHA_NORITAKE || ALPHA_PRIMO
+ depends on ALPHA_NORITAKE || ALPHA_MIKASA
config ALPHA_EV56
prompt "EV56 CPU (speed >= 400MHz)?"
depends on ALPHA_RAWHIDE
-config ALPHA_PRIMO
- bool "EV5 CPU daughtercard (model 5/xxx)?"
- depends on ALPHA_NORITAKE || ALPHA_MIKASA
- help
- Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
-
config ALPHA_T2
bool
depends on ALPHA_SABLE
bool
default y if !ALPHA_EV67
-config ALPHA_AVANTI
- bool
- depends on ALPHA_XL || ALPHA_AVANTI_CH
- default y
- help
- Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
- Alphas. Info at
- <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
-
config ALPHA_BROKEN_IRQ_MASK
bool
depends on ALPHA_GENERIC || ALPHA_PC164
config ALPHA_SRM
- bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
+ bool "Use SRM as bootloader" if ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS
depends on TTY
default y if ALPHA_MIKASA || ALPHA_SABLE || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
help
config ALPHA_WTINT
bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
default y if ALPHA_QEMU
- default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
+ default n if ALPHA_EV5 || ALPHA_EV56
default n if !ALPHA_SRM && !ALPHA_GENERIC
default y if SMP
help
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_APECS__H__
-#define __ALPHA_APECS__H__
-
-#include <linux/types.h>
-#include <asm/compiler.h>
-
-/*
- * APECS is the internal name for the 2107x chipset which provides
- * memory controller and PCI access for the 21064 chip based systems.
- *
- * This file is based on:
- *
- * DECchip 21071-AA and DECchip 21072-AA Core Logic Chipsets
- * Data Sheet
- *
- * EC-N0648-72
- *
- *
- * david.rusling@reo.mts.dec.com Initial Version.
- *
- */
-
-/*
- An AVANTI *might* be an XL, and an XL has only 27 bits of ISA address
- that get passed through the PCI<->ISA bridge chip. So we've gotta use
- both windows to max out the physical memory we can DMA to. Sigh...
-
- If we try a window at 0 for 1GB as a work-around, we run into conflicts
- with ISA/PCI bus memory which can't be relocated, like VGA aperture and
- BIOS ROMs. So we must put the windows high enough to avoid these areas.
-
- We put window 1 at BUS 64Mb for 64Mb, mapping physical 0 to 64Mb-1,
- and window 2 at BUS 1Gb for 1Gb, mapping physical 0 to 1Gb-1.
- Yes, this does map 0 to 64Mb-1 twice, but only window 1 will actually
- be used for that range (via virt_to_bus()).
-
- Note that we actually fudge the window 1 maximum as 48Mb instead of 64Mb,
- to keep virt_to_bus() from returning an address in the first window, for
- a data area that goes beyond the 64Mb first DMA window. Sigh...
- The fudge factor MUST match with <asm/dma.h> MAX_DMA_ADDRESS, but
- we can't just use that here, because of header file looping... :-(
-
- Window 1 will be used for all DMA from the ISA bus; yes, that does
- limit what memory an ISA floppy or sound card or Ethernet can touch, but
- it's also a known limitation on other platforms as well. We use the
- same technique that is used on INTEL platforms with similar limitation:
- set MAX_DMA_ADDRESS and clear some pages' DMAable flags during mem_init().
- We trust that any ISA bus device drivers will *always* ask for DMAable
- memory explicitly via kmalloc()/get_free_pages() flags arguments.
-
- Note that most PCI bus devices' drivers do *not* explicitly ask for
- DMAable memory; they count on being able to DMA to any memory they
- get from kmalloc()/get_free_pages(). They will also use window 1 for
- any physical memory accesses below 64Mb; the rest will be handled by
- window 2, maxing out at 1Gb of memory. I trust this is enough... :-)
-
- We hope that the area before the first window is large enough so that
- there will be no overlap at the top end (64Mb). We *must* locate the
- PCI cards' memory just below window 1, so that there's still the
- possibility of being able to access it via SPARSE space. This is
- important for cards such as the Matrox Millennium, whose Xserver
- wants to access memory-mapped registers in byte and short lengths.
-
- Note that the XL is treated differently from the AVANTI, even though
- for most other things they are identical. It didn't seem reasonable to
- make the AVANTI support pay for the limitations of the XL. It is true,
- however, that an XL kernel will run on an AVANTI without problems.
-
- %%% All of this should be obviated by the ability to route
- everything through the iommu.
-*/
-
-/*
- * 21071-DA Control and Status registers.
- * These are used for PCI memory access.
- */
-#define APECS_IOC_DCSR (IDENT_ADDR + 0x1A0000000UL)
-#define APECS_IOC_PEAR (IDENT_ADDR + 0x1A0000020UL)
-#define APECS_IOC_SEAR (IDENT_ADDR + 0x1A0000040UL)
-#define APECS_IOC_DR1 (IDENT_ADDR + 0x1A0000060UL)
-#define APECS_IOC_DR2 (IDENT_ADDR + 0x1A0000080UL)
-#define APECS_IOC_DR3 (IDENT_ADDR + 0x1A00000A0UL)
-
-#define APECS_IOC_TB1R (IDENT_ADDR + 0x1A00000C0UL)
-#define APECS_IOC_TB2R (IDENT_ADDR + 0x1A00000E0UL)
-
-#define APECS_IOC_PB1R (IDENT_ADDR + 0x1A0000100UL)
-#define APECS_IOC_PB2R (IDENT_ADDR + 0x1A0000120UL)
-
-#define APECS_IOC_PM1R (IDENT_ADDR + 0x1A0000140UL)
-#define APECS_IOC_PM2R (IDENT_ADDR + 0x1A0000160UL)
-
-#define APECS_IOC_HAXR0 (IDENT_ADDR + 0x1A0000180UL)
-#define APECS_IOC_HAXR1 (IDENT_ADDR + 0x1A00001A0UL)
-#define APECS_IOC_HAXR2 (IDENT_ADDR + 0x1A00001C0UL)
-
-#define APECS_IOC_PMLT (IDENT_ADDR + 0x1A00001E0UL)
-
-#define APECS_IOC_TLBTAG0 (IDENT_ADDR + 0x1A0000200UL)
-#define APECS_IOC_TLBTAG1 (IDENT_ADDR + 0x1A0000220UL)
-#define APECS_IOC_TLBTAG2 (IDENT_ADDR + 0x1A0000240UL)
-#define APECS_IOC_TLBTAG3 (IDENT_ADDR + 0x1A0000260UL)
-#define APECS_IOC_TLBTAG4 (IDENT_ADDR + 0x1A0000280UL)
-#define APECS_IOC_TLBTAG5 (IDENT_ADDR + 0x1A00002A0UL)
-#define APECS_IOC_TLBTAG6 (IDENT_ADDR + 0x1A00002C0UL)
-#define APECS_IOC_TLBTAG7 (IDENT_ADDR + 0x1A00002E0UL)
-
-#define APECS_IOC_TLBDATA0 (IDENT_ADDR + 0x1A0000300UL)
-#define APECS_IOC_TLBDATA1 (IDENT_ADDR + 0x1A0000320UL)
-#define APECS_IOC_TLBDATA2 (IDENT_ADDR + 0x1A0000340UL)
-#define APECS_IOC_TLBDATA3 (IDENT_ADDR + 0x1A0000360UL)
-#define APECS_IOC_TLBDATA4 (IDENT_ADDR + 0x1A0000380UL)
-#define APECS_IOC_TLBDATA5 (IDENT_ADDR + 0x1A00003A0UL)
-#define APECS_IOC_TLBDATA6 (IDENT_ADDR + 0x1A00003C0UL)
-#define APECS_IOC_TLBDATA7 (IDENT_ADDR + 0x1A00003E0UL)
-
-#define APECS_IOC_TBIA (IDENT_ADDR + 0x1A0000400UL)
-
-
-/*
- * 21071-CA Control and Status registers.
- * These are used to program memory timing,
- * configure memory and initialise the B-Cache.
- */
-#define APECS_MEM_GCR (IDENT_ADDR + 0x180000000UL)
-#define APECS_MEM_EDSR (IDENT_ADDR + 0x180000040UL)
-#define APECS_MEM_TAR (IDENT_ADDR + 0x180000060UL)
-#define APECS_MEM_ELAR (IDENT_ADDR + 0x180000080UL)
-#define APECS_MEM_EHAR (IDENT_ADDR + 0x1800000a0UL)
-#define APECS_MEM_SFT_RST (IDENT_ADDR + 0x1800000c0UL)
-#define APECS_MEM_LDxLAR (IDENT_ADDR + 0x1800000e0UL)
-#define APECS_MEM_LDxHAR (IDENT_ADDR + 0x180000100UL)
-#define APECS_MEM_GTR (IDENT_ADDR + 0x180000200UL)
-#define APECS_MEM_RTR (IDENT_ADDR + 0x180000220UL)
-#define APECS_MEM_VFPR (IDENT_ADDR + 0x180000240UL)
-#define APECS_MEM_PDLDR (IDENT_ADDR + 0x180000260UL)
-#define APECS_MEM_PDhDR (IDENT_ADDR + 0x180000280UL)
-
-/* Bank x Base Address Register */
-#define APECS_MEM_B0BAR (IDENT_ADDR + 0x180000800UL)
-#define APECS_MEM_B1BAR (IDENT_ADDR + 0x180000820UL)
-#define APECS_MEM_B2BAR (IDENT_ADDR + 0x180000840UL)
-#define APECS_MEM_B3BAR (IDENT_ADDR + 0x180000860UL)
-#define APECS_MEM_B4BAR (IDENT_ADDR + 0x180000880UL)
-#define APECS_MEM_B5BAR (IDENT_ADDR + 0x1800008A0UL)
-#define APECS_MEM_B6BAR (IDENT_ADDR + 0x1800008C0UL)
-#define APECS_MEM_B7BAR (IDENT_ADDR + 0x1800008E0UL)
-#define APECS_MEM_B8BAR (IDENT_ADDR + 0x180000900UL)
-
-/* Bank x Configuration Register */
-#define APECS_MEM_B0BCR (IDENT_ADDR + 0x180000A00UL)
-#define APECS_MEM_B1BCR (IDENT_ADDR + 0x180000A20UL)
-#define APECS_MEM_B2BCR (IDENT_ADDR + 0x180000A40UL)
-#define APECS_MEM_B3BCR (IDENT_ADDR + 0x180000A60UL)
-#define APECS_MEM_B4BCR (IDENT_ADDR + 0x180000A80UL)
-#define APECS_MEM_B5BCR (IDENT_ADDR + 0x180000AA0UL)
-#define APECS_MEM_B6BCR (IDENT_ADDR + 0x180000AC0UL)
-#define APECS_MEM_B7BCR (IDENT_ADDR + 0x180000AE0UL)
-#define APECS_MEM_B8BCR (IDENT_ADDR + 0x180000B00UL)
-
-/* Bank x Timing Register A */
-#define APECS_MEM_B0TRA (IDENT_ADDR + 0x180000C00UL)
-#define APECS_MEM_B1TRA (IDENT_ADDR + 0x180000C20UL)
-#define APECS_MEM_B2TRA (IDENT_ADDR + 0x180000C40UL)
-#define APECS_MEM_B3TRA (IDENT_ADDR + 0x180000C60UL)
-#define APECS_MEM_B4TRA (IDENT_ADDR + 0x180000C80UL)
-#define APECS_MEM_B5TRA (IDENT_ADDR + 0x180000CA0UL)
-#define APECS_MEM_B6TRA (IDENT_ADDR + 0x180000CC0UL)
-#define APECS_MEM_B7TRA (IDENT_ADDR + 0x180000CE0UL)
-#define APECS_MEM_B8TRA (IDENT_ADDR + 0x180000D00UL)
-
-/* Bank x Timing Register B */
-#define APECS_MEM_B0TRB (IDENT_ADDR + 0x180000E00UL)
-#define APECS_MEM_B1TRB (IDENT_ADDR + 0x180000E20UL)
-#define APECS_MEM_B2TRB (IDENT_ADDR + 0x180000E40UL)
-#define APECS_MEM_B3TRB (IDENT_ADDR + 0x180000E60UL)
-#define APECS_MEM_B4TRB (IDENT_ADDR + 0x180000E80UL)
-#define APECS_MEM_B5TRB (IDENT_ADDR + 0x180000EA0UL)
-#define APECS_MEM_B6TRB (IDENT_ADDR + 0x180000EC0UL)
-#define APECS_MEM_B7TRB (IDENT_ADDR + 0x180000EE0UL)
-#define APECS_MEM_B8TRB (IDENT_ADDR + 0x180000F00UL)
-
-
-/*
- * Memory spaces:
- */
-#define APECS_IACK_SC (IDENT_ADDR + 0x1b0000000UL)
-#define APECS_CONF (IDENT_ADDR + 0x1e0000000UL)
-#define APECS_IO (IDENT_ADDR + 0x1c0000000UL)
-#define APECS_SPARSE_MEM (IDENT_ADDR + 0x200000000UL)
-#define APECS_DENSE_MEM (IDENT_ADDR + 0x300000000UL)
-
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define APECS_IOC_STAT0_CMD 0xf
-#define APECS_IOC_STAT0_ERR (1<<4)
-#define APECS_IOC_STAT0_LOST (1<<5)
-#define APECS_IOC_STAT0_THIT (1<<6)
-#define APECS_IOC_STAT0_TREF (1<<7)
-#define APECS_IOC_STAT0_CODE_SHIFT 8
-#define APECS_IOC_STAT0_CODE_MASK 0x7
-#define APECS_IOC_STAT0_P_NBR_SHIFT 13
-#define APECS_IOC_STAT0_P_NBR_MASK 0x7ffff
-
-#define APECS_HAE_ADDRESS APECS_IOC_HAXR1
-
-
-/*
- * Data structure for handling APECS machine checks:
- */
-
-struct el_apecs_mikasa_sysdata_mcheck
-{
- unsigned long coma_gcr;
- unsigned long coma_edsr;
- unsigned long coma_ter;
- unsigned long coma_elar;
- unsigned long coma_ehar;
- unsigned long coma_ldlr;
- unsigned long coma_ldhr;
- unsigned long coma_base0;
- unsigned long coma_base1;
- unsigned long coma_base2;
- unsigned long coma_base3;
- unsigned long coma_cnfg0;
- unsigned long coma_cnfg1;
- unsigned long coma_cnfg2;
- unsigned long coma_cnfg3;
- unsigned long epic_dcsr;
- unsigned long epic_pear;
- unsigned long epic_sear;
- unsigned long epic_tbr1;
- unsigned long epic_tbr2;
- unsigned long epic_pbr1;
- unsigned long epic_pbr2;
- unsigned long epic_pmr1;
- unsigned long epic_pmr2;
- unsigned long epic_harx1;
- unsigned long epic_harx2;
- unsigned long epic_pmlt;
- unsigned long epic_tag0;
- unsigned long epic_tag1;
- unsigned long epic_tag2;
- unsigned long epic_tag3;
- unsigned long epic_tag4;
- unsigned long epic_tag5;
- unsigned long epic_tag6;
- unsigned long epic_tag7;
- unsigned long epic_data0;
- unsigned long epic_data1;
- unsigned long epic_data2;
- unsigned long epic_data3;
- unsigned long epic_data4;
- unsigned long epic_data5;
- unsigned long epic_data6;
- unsigned long epic_data7;
-
- unsigned long pceb_vid;
- unsigned long pceb_did;
- unsigned long pceb_revision;
- unsigned long pceb_command;
- unsigned long pceb_status;
- unsigned long pceb_latency;
- unsigned long pceb_control;
- unsigned long pceb_arbcon;
- unsigned long pceb_arbpri;
-
- unsigned long esc_id;
- unsigned long esc_revision;
- unsigned long esc_int0;
- unsigned long esc_int1;
- unsigned long esc_elcr0;
- unsigned long esc_elcr1;
- unsigned long esc_last_eisa;
- unsigned long esc_nmi_stat;
-
- unsigned long pci_ir;
- unsigned long pci_imr;
- unsigned long svr_mgr;
-};
-
-/* This for the normal APECS machines. */
-struct el_apecs_sysdata_mcheck
-{
- unsigned long coma_gcr;
- unsigned long coma_edsr;
- unsigned long coma_ter;
- unsigned long coma_elar;
- unsigned long coma_ehar;
- unsigned long coma_ldlr;
- unsigned long coma_ldhr;
- unsigned long coma_base0;
- unsigned long coma_base1;
- unsigned long coma_base2;
- unsigned long coma_cnfg0;
- unsigned long coma_cnfg1;
- unsigned long coma_cnfg2;
- unsigned long epic_dcsr;
- unsigned long epic_pear;
- unsigned long epic_sear;
- unsigned long epic_tbr1;
- unsigned long epic_tbr2;
- unsigned long epic_pbr1;
- unsigned long epic_pbr2;
- unsigned long epic_pmr1;
- unsigned long epic_pmr2;
- unsigned long epic_harx1;
- unsigned long epic_harx2;
- unsigned long epic_pmlt;
- unsigned long epic_tag0;
- unsigned long epic_tag1;
- unsigned long epic_tag2;
- unsigned long epic_tag3;
- unsigned long epic_tag4;
- unsigned long epic_tag5;
- unsigned long epic_tag6;
- unsigned long epic_tag7;
- unsigned long epic_data0;
- unsigned long epic_data1;
- unsigned long epic_data2;
- unsigned long epic_data3;
- unsigned long epic_data4;
- unsigned long epic_data5;
- unsigned long epic_data6;
- unsigned long epic_data7;
-};
-
-struct el_apecs_procdata
-{
- unsigned long paltemp[32]; /* PAL TEMP REGS. */
- /* EV4-specific fields */
- unsigned long exc_addr; /* Address of excepting instruction. */
- unsigned long exc_sum; /* Summary of arithmetic traps. */
- unsigned long exc_mask; /* Exception mask (from exc_sum). */
- unsigned long iccsr; /* IBox hardware enables. */
- unsigned long pal_base; /* Base address for PALcode. */
- unsigned long hier; /* Hardware Interrupt Enable. */
- unsigned long hirr; /* Hardware Interrupt Request. */
- unsigned long csr; /* D-stream fault info. */
- unsigned long dc_stat; /* D-cache status (ECC/Parity Err). */
- unsigned long dc_addr; /* EV3 Phys Addr for ECC/DPERR. */
- unsigned long abox_ctl; /* ABox Control Register. */
- unsigned long biu_stat; /* BIU Status. */
- unsigned long biu_addr; /* BUI Address. */
- unsigned long biu_ctl; /* BIU Control. */
- unsigned long fill_syndrome;/* For correcting ECC errors. */
- unsigned long fill_addr; /* Cache block which was being read */
- unsigned long va; /* Effective VA of fault or miss. */
- unsigned long bc_tag; /* Backup Cache Tag Probe Results.*/
-};
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the APECS machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here. In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip volatile int __force *
-#define vuip volatile unsigned int __force *
-#define vulp volatile unsigned long __force *
-
-#define APECS_SET_HAE \
- do { \
- if (addr >= (1UL << 24)) { \
- unsigned long msb = addr & 0xf8000000; \
- addr -= msb; \
- set_hae(msb); \
- } \
- } while (0)
-
-__EXTERN_INLINE u8 apecs_ioread8(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long result, base_and_type;
-
- if (addr >= APECS_DENSE_MEM) {
- addr -= APECS_DENSE_MEM;
- APECS_SET_HAE;
- base_and_type = APECS_SPARSE_MEM + 0x00;
- } else {
- addr -= APECS_IO;
- base_and_type = APECS_IO + 0x00;
- }
-
- result = *(vip) ((addr << 5) + base_and_type);
- return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite8(u8 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long w, base_and_type;
-
- if (addr >= APECS_DENSE_MEM) {
- addr -= APECS_DENSE_MEM;
- APECS_SET_HAE;
- base_and_type = APECS_SPARSE_MEM + 0x00;
- } else {
- addr -= APECS_IO;
- base_and_type = APECS_IO + 0x00;
- }
-
- w = __kernel_insbl(b, addr & 3);
- *(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE u16 apecs_ioread16(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long result, base_and_type;
-
- if (addr >= APECS_DENSE_MEM) {
- addr -= APECS_DENSE_MEM;
- APECS_SET_HAE;
- base_and_type = APECS_SPARSE_MEM + 0x08;
- } else {
- addr -= APECS_IO;
- base_and_type = APECS_IO + 0x08;
- }
-
- result = *(vip) ((addr << 5) + base_and_type);
- return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite16(u16 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long w, base_and_type;
-
- if (addr >= APECS_DENSE_MEM) {
- addr -= APECS_DENSE_MEM;
- APECS_SET_HAE;
- base_and_type = APECS_SPARSE_MEM + 0x08;
- } else {
- addr -= APECS_IO;
- base_and_type = APECS_IO + 0x08;
- }
-
- w = __kernel_inswl(b, addr & 3);
- *(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE u32 apecs_ioread32(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < APECS_DENSE_MEM)
- addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
- return *(vuip)addr;
-}
-
-__EXTERN_INLINE void apecs_iowrite32(u32 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < APECS_DENSE_MEM)
- addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
- *(vuip)addr = b;
-}
-
-__EXTERN_INLINE u64 apecs_ioread64(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < APECS_DENSE_MEM)
- addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
- return *(vulp)addr;
-}
-
-__EXTERN_INLINE void apecs_iowrite64(u64 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < APECS_DENSE_MEM)
- addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
- *(vulp)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioportmap(unsigned long addr)
-{
- return (void __iomem *)(addr + APECS_IO);
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioremap(unsigned long addr,
- unsigned long size)
-{
- return (void __iomem *)(addr + APECS_DENSE_MEM);
-}
-
-__EXTERN_INLINE int apecs_is_ioaddr(unsigned long addr)
-{
- return addr >= IDENT_ADDR + 0x180000000UL;
-}
-
-__EXTERN_INLINE int apecs_is_mmio(const volatile void __iomem *addr)
-{
- return (unsigned long)addr >= APECS_DENSE_MEM;
-}
-
-#undef APECS_SET_HAE
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX apecs
-#define apecs_trivial_io_bw 0
-#define apecs_trivial_io_lq 0
-#define apecs_trivial_rw_bw 2
-#define apecs_trivial_rw_lq 1
-#define apecs_trivial_iounmap 1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_APECS__H__ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_LCA__H__
-#define __ALPHA_LCA__H__
-
-#include <asm/compiler.h>
-#include <asm/mce.h>
-
-/*
- * Low Cost Alpha (LCA) definitions (these apply to 21066 and 21068,
- * for example).
- *
- * This file is based on:
- *
- * DECchip 21066 and DECchip 21068 Alpha AXP Microprocessors
- * Hardware Reference Manual; Digital Equipment Corp.; May 1994;
- * Maynard, MA; Order Number: EC-N2681-71.
- */
-
-/*
- * NOTE: The LCA uses a Host Address Extension (HAE) register to access
- * PCI addresses that are beyond the first 27 bits of address
- * space. Updating the HAE requires an external cycle (and
- * a memory barrier), which tends to be slow. Instead of updating
- * it on each sparse memory access, we keep the current HAE value
- * cached in variable cache_hae. Only if the cached HAE differs
- * from the desired HAE value do we actually updated HAE register.
- * The HAE register is preserved by the interrupt handler entry/exit
- * code, so this scheme works even in the presence of interrupts.
- *
- * Dense memory space doesn't require the HAE, but is restricted to
- * aligned 32 and 64 bit accesses. Special Cycle and Interrupt
- * Acknowledge cycles may also require the use of the HAE. The LCA
- * limits I/O address space to the bottom 24 bits of address space,
- * but this easily covers the 16 bit ISA I/O address space.
- */
-
-/*
- * NOTE 2! The memory operations do not set any memory barriers, as
- * it's not needed for cases like a frame buffer that is essentially
- * memory-like. You need to do them by hand if the operations depend
- * on ordering.
- *
- * Similarly, the port I/O operations do a "mb" only after a write
- * operation: if an mb is needed before (as in the case of doing
- * memory mapped I/O first, and then a port I/O operation to the same
- * device), it needs to be done by hand.
- *
- * After the above has bitten me 100 times, I'll give up and just do
- * the mb all the time, but right now I'm hoping this will work out.
- * Avoiding mb's may potentially be a noticeable speed improvement,
- * but I can't honestly say I've tested it.
- *
- * Handling interrupts that need to do mb's to synchronize to
- * non-interrupts is another fun race area. Don't do it (because if
- * you do, I'll have to do *everything* with interrupts disabled,
- * ugh).
- */
-
-/*
- * Memory Controller registers:
- */
-#define LCA_MEM_BCR0 (IDENT_ADDR + 0x120000000UL)
-#define LCA_MEM_BCR1 (IDENT_ADDR + 0x120000008UL)
-#define LCA_MEM_BCR2 (IDENT_ADDR + 0x120000010UL)
-#define LCA_MEM_BCR3 (IDENT_ADDR + 0x120000018UL)
-#define LCA_MEM_BMR0 (IDENT_ADDR + 0x120000020UL)
-#define LCA_MEM_BMR1 (IDENT_ADDR + 0x120000028UL)
-#define LCA_MEM_BMR2 (IDENT_ADDR + 0x120000030UL)
-#define LCA_MEM_BMR3 (IDENT_ADDR + 0x120000038UL)
-#define LCA_MEM_BTR0 (IDENT_ADDR + 0x120000040UL)
-#define LCA_MEM_BTR1 (IDENT_ADDR + 0x120000048UL)
-#define LCA_MEM_BTR2 (IDENT_ADDR + 0x120000050UL)
-#define LCA_MEM_BTR3 (IDENT_ADDR + 0x120000058UL)
-#define LCA_MEM_GTR (IDENT_ADDR + 0x120000060UL)
-#define LCA_MEM_ESR (IDENT_ADDR + 0x120000068UL)
-#define LCA_MEM_EAR (IDENT_ADDR + 0x120000070UL)
-#define LCA_MEM_CAR (IDENT_ADDR + 0x120000078UL)
-#define LCA_MEM_VGR (IDENT_ADDR + 0x120000080UL)
-#define LCA_MEM_PLM (IDENT_ADDR + 0x120000088UL)
-#define LCA_MEM_FOR (IDENT_ADDR + 0x120000090UL)
-
-/*
- * I/O Controller registers:
- */
-#define LCA_IOC_HAE (IDENT_ADDR + 0x180000000UL)
-#define LCA_IOC_CONF (IDENT_ADDR + 0x180000020UL)
-#define LCA_IOC_STAT0 (IDENT_ADDR + 0x180000040UL)
-#define LCA_IOC_STAT1 (IDENT_ADDR + 0x180000060UL)
-#define LCA_IOC_TBIA (IDENT_ADDR + 0x180000080UL)
-#define LCA_IOC_TB_ENA (IDENT_ADDR + 0x1800000a0UL)
-#define LCA_IOC_SFT_RST (IDENT_ADDR + 0x1800000c0UL)
-#define LCA_IOC_PAR_DIS (IDENT_ADDR + 0x1800000e0UL)
-#define LCA_IOC_W_BASE0 (IDENT_ADDR + 0x180000100UL)
-#define LCA_IOC_W_BASE1 (IDENT_ADDR + 0x180000120UL)
-#define LCA_IOC_W_MASK0 (IDENT_ADDR + 0x180000140UL)
-#define LCA_IOC_W_MASK1 (IDENT_ADDR + 0x180000160UL)
-#define LCA_IOC_T_BASE0 (IDENT_ADDR + 0x180000180UL)
-#define LCA_IOC_T_BASE1 (IDENT_ADDR + 0x1800001a0UL)
-#define LCA_IOC_TB_TAG0 (IDENT_ADDR + 0x188000000UL)
-#define LCA_IOC_TB_TAG1 (IDENT_ADDR + 0x188000020UL)
-#define LCA_IOC_TB_TAG2 (IDENT_ADDR + 0x188000040UL)
-#define LCA_IOC_TB_TAG3 (IDENT_ADDR + 0x188000060UL)
-#define LCA_IOC_TB_TAG4 (IDENT_ADDR + 0x188000070UL)
-#define LCA_IOC_TB_TAG5 (IDENT_ADDR + 0x1880000a0UL)
-#define LCA_IOC_TB_TAG6 (IDENT_ADDR + 0x1880000c0UL)
-#define LCA_IOC_TB_TAG7 (IDENT_ADDR + 0x1880000e0UL)
-
-/*
- * Memory spaces:
- */
-#define LCA_IACK_SC (IDENT_ADDR + 0x1a0000000UL)
-#define LCA_CONF (IDENT_ADDR + 0x1e0000000UL)
-#define LCA_IO (IDENT_ADDR + 0x1c0000000UL)
-#define LCA_SPARSE_MEM (IDENT_ADDR + 0x200000000UL)
-#define LCA_DENSE_MEM (IDENT_ADDR + 0x300000000UL)
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define LCA_IOC_STAT0_CMD 0xf
-#define LCA_IOC_STAT0_ERR (1<<4)
-#define LCA_IOC_STAT0_LOST (1<<5)
-#define LCA_IOC_STAT0_THIT (1<<6)
-#define LCA_IOC_STAT0_TREF (1<<7)
-#define LCA_IOC_STAT0_CODE_SHIFT 8
-#define LCA_IOC_STAT0_CODE_MASK 0x7
-#define LCA_IOC_STAT0_P_NBR_SHIFT 13
-#define LCA_IOC_STAT0_P_NBR_MASK 0x7ffff
-
-#define LCA_HAE_ADDRESS LCA_IOC_HAE
-
-/* LCA PMR Power Management register defines */
-#define LCA_PMR_ADDR (IDENT_ADDR + 0x120000098UL)
-#define LCA_PMR_PDIV 0x7 /* Primary clock divisor */
-#define LCA_PMR_ODIV 0x38 /* Override clock divisor */
-#define LCA_PMR_INTO 0x40 /* Interrupt override */
-#define LCA_PMR_DMAO 0x80 /* DMA override */
-#define LCA_PMR_OCCEB 0xffff0000L /* Override cycle counter - even bits */
-#define LCA_PMR_OCCOB 0xffff000000000000L /* Override cycle counter - even bits */
-#define LCA_PMR_PRIMARY_MASK 0xfffffffffffffff8L
-
-/* LCA PMR Macros */
-
-#define LCA_READ_PMR (*(volatile unsigned long *)LCA_PMR_ADDR)
-#define LCA_WRITE_PMR(d) (*((volatile unsigned long *)LCA_PMR_ADDR) = (d))
-
-#define LCA_GET_PRIMARY(r) ((r) & LCA_PMR_PDIV)
-#define LCA_GET_OVERRIDE(r) (((r) >> 3) & LCA_PMR_PDIV)
-#define LCA_SET_PRIMARY_CLOCK(r, c) ((r) = (((r) & LCA_PMR_PRIMARY_MASK)|(c)))
-
-/* LCA PMR Divisor values */
-#define LCA_PMR_DIV_1 0x0
-#define LCA_PMR_DIV_1_5 0x1
-#define LCA_PMR_DIV_2 0x2
-#define LCA_PMR_DIV_4 0x3
-#define LCA_PMR_DIV_8 0x4
-#define LCA_PMR_DIV_16 0x5
-#define LCA_PMR_DIV_MIN DIV_1
-#define LCA_PMR_DIV_MAX DIV_16
-
-
-/*
- * Data structure for handling LCA machine checks. Correctable errors
- * result in a short logout frame, uncorrectable ones in a long one.
- */
-struct el_lca_mcheck_short {
- struct el_common h; /* common logout header */
- unsigned long esr; /* error-status register */
- unsigned long ear; /* error-address register */
- unsigned long dc_stat; /* dcache status register */
- unsigned long ioc_stat0; /* I/O controller status register 0 */
- unsigned long ioc_stat1; /* I/O controller status register 1 */
-};
-
-struct el_lca_mcheck_long {
- struct el_common h; /* common logout header */
- unsigned long pt[31]; /* PAL temps */
- unsigned long exc_addr; /* exception address */
- unsigned long pad1[3];
- unsigned long pal_base; /* PALcode base address */
- unsigned long hier; /* hw interrupt enable */
- unsigned long hirr; /* hw interrupt request */
- unsigned long mm_csr; /* MMU control & status */
- unsigned long dc_stat; /* data cache status */
- unsigned long dc_addr; /* data cache addr register */
- unsigned long abox_ctl; /* address box control register */
- unsigned long esr; /* error status register */
- unsigned long ear; /* error address register */
- unsigned long car; /* cache control register */
- unsigned long ioc_stat0; /* I/O controller status register 0 */
- unsigned long ioc_stat1; /* I/O controller status register 1 */
- unsigned long va; /* virtual address register */
-};
-
-union el_lca {
- struct el_common * c;
- struct el_lca_mcheck_long * l;
- struct el_lca_mcheck_short * s;
-};
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the Noname machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here. In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip volatile int __force *
-#define vuip volatile unsigned int __force *
-#define vulp volatile unsigned long __force *
-
-#define LCA_SET_HAE \
- do { \
- if (addr >= (1UL << 24)) { \
- unsigned long msb = addr & 0xf8000000; \
- addr -= msb; \
- set_hae(msb); \
- } \
- } while (0)
-
-
-__EXTERN_INLINE u8 lca_ioread8(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long result, base_and_type;
-
- if (addr >= LCA_DENSE_MEM) {
- addr -= LCA_DENSE_MEM;
- LCA_SET_HAE;
- base_and_type = LCA_SPARSE_MEM + 0x00;
- } else {
- addr -= LCA_IO;
- base_and_type = LCA_IO + 0x00;
- }
-
- result = *(vip) ((addr << 5) + base_and_type);
- return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long w, base_and_type;
-
- if (addr >= LCA_DENSE_MEM) {
- addr -= LCA_DENSE_MEM;
- LCA_SET_HAE;
- base_and_type = LCA_SPARSE_MEM + 0x00;
- } else {
- addr -= LCA_IO;
- base_and_type = LCA_IO + 0x00;
- }
-
- w = __kernel_insbl(b, addr & 3);
- *(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE u16 lca_ioread16(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long result, base_and_type;
-
- if (addr >= LCA_DENSE_MEM) {
- addr -= LCA_DENSE_MEM;
- LCA_SET_HAE;
- base_and_type = LCA_SPARSE_MEM + 0x08;
- } else {
- addr -= LCA_IO;
- base_and_type = LCA_IO + 0x08;
- }
-
- result = *(vip) ((addr << 5) + base_and_type);
- return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long w, base_and_type;
-
- if (addr >= LCA_DENSE_MEM) {
- addr -= LCA_DENSE_MEM;
- LCA_SET_HAE;
- base_and_type = LCA_SPARSE_MEM + 0x08;
- } else {
- addr -= LCA_IO;
- base_and_type = LCA_IO + 0x08;
- }
-
- w = __kernel_inswl(b, addr & 3);
- *(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE u32 lca_ioread32(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < LCA_DENSE_MEM)
- addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
- return *(vuip)addr;
-}
-
-__EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < LCA_DENSE_MEM)
- addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
- *(vuip)addr = b;
-}
-
-__EXTERN_INLINE u64 lca_ioread64(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < LCA_DENSE_MEM)
- addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
- return *(vulp)addr;
-}
-
-__EXTERN_INLINE void lca_iowrite64(u64 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < LCA_DENSE_MEM)
- addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
- *(vulp)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr)
-{
- return (void __iomem *)(addr + LCA_IO);
-}
-
-__EXTERN_INLINE void __iomem *lca_ioremap(unsigned long addr,
- unsigned long size)
-{
- return (void __iomem *)(addr + LCA_DENSE_MEM);
-}
-
-__EXTERN_INLINE int lca_is_ioaddr(unsigned long addr)
-{
- return addr >= IDENT_ADDR + 0x120000000UL;
-}
-
-__EXTERN_INLINE int lca_is_mmio(const volatile void __iomem *addr)
-{
- return (unsigned long)addr >= LCA_DENSE_MEM;
-}
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX lca
-#define lca_trivial_rw_bw 2
-#define lca_trivial_rw_lq 1
-#define lca_trivial_io_bw 0
-#define lca_trivial_io_lq 0
-#define lca_trivial_iounmap 1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_LCA__H__ */
just a wiring limit.
*/
-/* The maximum address for ISA DMA transfer on Alpha XL, due to an
- hardware SIO limitation, is 64MB.
-*/
-#define ALPHA_XL_MAX_ISA_DMA_ADDRESS 0x04000000UL
-
/* The maximum address for ISA DMA transfer on RUFFIAN,
due to an hardware SIO limitation, is 16MB.
*/
#ifdef CONFIG_ALPHA_GENERIC
# define MAX_ISA_DMA_ADDRESS (alpha_mv.max_isa_dma_address)
#else
-# if defined(CONFIG_ALPHA_XL)
-# define MAX_ISA_DMA_ADDRESS ALPHA_XL_MAX_ISA_DMA_ADDRESS
-# elif defined(CONFIG_ALPHA_RUFFIAN)
+# if defined(CONFIG_ALPHA_RUFFIAN)
# define MAX_ISA_DMA_ADDRESS ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS
# elif defined(CONFIG_ALPHA_SABLE)
# define MAX_ISA_DMA_ADDRESS ALPHA_SABLE_MAX_ISA_DMA_ADDRESS
#else
-#if defined(CONFIG_ALPHA_APECS)
-# include <asm/core_apecs.h>
-#elif defined(CONFIG_ALPHA_CIA)
+#if defined(CONFIG_ALPHA_CIA)
# include <asm/core_cia.h>
#elif defined(CONFIG_ALPHA_IRONGATE)
# include <asm/core_irongate.h>
-#elif defined(CONFIG_ALPHA_LCA)
-# include <asm/core_lca.h>
#elif defined(CONFIG_ALPHA_MARVEL)
# include <asm/core_marvel.h>
#elif defined(CONFIG_ALPHA_MCPCIA)
# define NR_IRQS (32768 + 16) /* marvel - 32 pids */
# endif
-#elif defined(CONFIG_ALPHA_CABRIOLET) || \
- defined(CONFIG_ALPHA_EB66P) || \
- defined(CONFIG_ALPHA_EB164) || \
+#elif defined(CONFIG_ALPHA_EB164) || \
defined(CONFIG_ALPHA_PC164) || \
defined(CONFIG_ALPHA_LX164)
# define NR_IRQS 35
-#elif defined(CONFIG_ALPHA_EB66) || \
- defined(CONFIG_ALPHA_EB64P) || \
- defined(CONFIG_ALPHA_MIKASA)
+#elif defined(CONFIG_ALPHA_MIKASA)
# define NR_IRQS 32
#elif defined(CONFIG_ALPHA_ALCOR) || \
ifdef CONFIG_ALPHA_GENERIC
-obj-y += core_apecs.o core_cia.o core_irongate.o core_lca.o \
+obj-y += core_cia.o core_irongate.o \
core_mcpcia.o core_polaris.o core_t2.o \
core_tsunami.o
-obj-y += sys_alcor.o sys_cabriolet.o sys_dp264.o sys_eb64p.o sys_eiger.o \
+obj-y += sys_alcor.o sys_cabriolet.o sys_dp264.o sys_eiger.o \
sys_miata.o sys_mikasa.o sys_nautilus.o \
sys_noritake.o sys_rawhide.o sys_ruffian.o sys_rx164.o \
- sys_sable.o sys_sio.o sys_sx164.o sys_takara.o
+ sys_sable.o sys_sx164.o sys_takara.o
ifndef CONFIG_ALPHA_LEGACY_START_ADDRESS
obj-y += core_marvel.o core_titan.o core_wildfire.o
obj-$(CONFIG_ALPHA_SRM) += srmcons.o
# Core logic support
-obj-$(CONFIG_ALPHA_APECS) += core_apecs.o
obj-$(CONFIG_ALPHA_CIA) += core_cia.o
obj-$(CONFIG_ALPHA_IRONGATE) += core_irongate.o
-obj-$(CONFIG_ALPHA_LCA) += core_lca.o
obj-$(CONFIG_ALPHA_MARVEL) += core_marvel.o gct.o
obj-$(CONFIG_ALPHA_MCPCIA) += core_mcpcia.o
obj-$(CONFIG_ALPHA_POLARIS) += core_polaris.o
# Board support
obj-$(CONFIG_ALPHA_ALCOR) += sys_alcor.o irq_i8259.o irq_srm.o
-obj-$(CONFIG_ALPHA_CABRIOLET) += sys_cabriolet.o irq_i8259.o irq_srm.o \
- pc873xx.o
obj-$(CONFIG_ALPHA_EB164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
pc873xx.o
-obj-$(CONFIG_ALPHA_EB66P) += sys_cabriolet.o irq_i8259.o irq_srm.o \
- pc873xx.o
obj-$(CONFIG_ALPHA_LX164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
smc37c93x.o
obj-$(CONFIG_ALPHA_PC164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
obj-$(CONFIG_ALPHA_DP264) += sys_dp264.o irq_i8259.o es1888.o smc37c669.o
obj-$(CONFIG_ALPHA_SHARK) += sys_dp264.o irq_i8259.o es1888.o smc37c669.o
obj-$(CONFIG_ALPHA_TITAN) += sys_titan.o irq_i8259.o smc37c669.o
-obj-$(CONFIG_ALPHA_EB64P) += sys_eb64p.o irq_i8259.o
-obj-$(CONFIG_ALPHA_EB66) += sys_eb64p.o irq_i8259.o
obj-$(CONFIG_ALPHA_EIGER) += sys_eiger.o irq_i8259.o
obj-$(CONFIG_ALPHA_MARVEL) += sys_marvel.o
obj-$(CONFIG_ALPHA_MIATA) += sys_miata.o irq_pyxis.o irq_i8259.o \
obj-$(CONFIG_ALPHA_RUFFIAN) += sys_ruffian.o irq_pyxis.o irq_i8259.o
obj-$(CONFIG_ALPHA_RX164) += sys_rx164.o irq_i8259.o
obj-$(CONFIG_ALPHA_SABLE) += sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_AVANTI) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_NONAME) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_P2K) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_XL) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
obj-$(CONFIG_ALPHA_SX164) += sys_sx164.o irq_pyxis.o irq_i8259.o \
irq_srm.o smc37c669.o
obj-$(CONFIG_ALPHA_TAKARA) += sys_takara.o irq_i8259.o pc873xx.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/alpha/kernel/core_apecs.c
- *
- * Rewritten for Apecs from the lca.c from:
- *
- * Written by David Mosberger (davidm@cs.arizona.edu) with some code
- * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
- * bios code.
- *
- * Code common to all APECS core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-#include <asm/smp.h>
-#include <asm/mce.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-/*
- * NOTE: Herein lie back-to-back mb instructions. They are magic.
- * One plausible explanation is that the i/o controller does not properly
- * handle the system transaction. Another involves timing. Ho hum.
- */
-
-/*
- * BIOS32-style PCI interface:
- */
-
-#define DEBUG_CONFIG 0
-
-#if DEBUG_CONFIG
-# define DBGC(args) printk args
-#else
-# define DBGC(args)
-#endif
-
-#define vuip volatile unsigned int *
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the APECS_HAXR2 register
- * accordingly. It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
- * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- * 31:11 Device select bit.
- * 10:8 Function number
- * 7:2 Register number
- *
- * Type 1:
- *
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
- * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- * 31:24 reserved
- * 23:16 bus number (8 bits = 128 possible buses)
- * 15:11 Device number (5 bits)
- * 10:8 function number
- * 7:2 register number
- *
- * Notes:
- * The function number selects which function of a multi-function device
- * (e.g., SCSI and Ethernet).
- *
- * The register selects a DWORD (32 bit) register offset. Hence it
- * doesn't get shifted by 2 bits as we want to "drop" the bottom two
- * bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
- unsigned long *pci_addr, unsigned char *type1)
-{
- unsigned long addr;
- u8 bus = pbus->number;
-
- DBGC(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
- " pci_addr=0x%p, type1=0x%p)\n",
- bus, device_fn, where, pci_addr, type1));
-
- if (bus == 0) {
- int device = device_fn >> 3;
-
- /* type 0 configuration cycle: */
-
- if (device > 20) {
- DBGC(("mk_conf_addr: device (%d) > 20, returning -1\n",
- device));
- return -1;
- }
-
- *type1 = 0;
- addr = (device_fn << 8) | (where);
- } else {
- /* type 1 configuration cycle: */
- *type1 = 1;
- addr = (bus << 16) | (device_fn << 8) | (where);
- }
- *pci_addr = addr;
- DBGC(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
- return 0;
-}
-
-static unsigned int
-conf_read(unsigned long addr, unsigned char type1)
-{
- unsigned long flags;
- unsigned int stat0, value;
- unsigned int haxr2 = 0;
-
- local_irq_save(flags); /* avoid getting hit by machine check */
-
- DBGC(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1));
-
- /* Reset status register to avoid losing errors. */
- stat0 = *(vuip)APECS_IOC_DCSR;
- *(vuip)APECS_IOC_DCSR = stat0;
- mb();
- DBGC(("conf_read: APECS DCSR was 0x%x\n", stat0));
-
- /* If Type1 access, must set HAE #2. */
- if (type1) {
- haxr2 = *(vuip)APECS_IOC_HAXR2;
- mb();
- *(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
- DBGC(("conf_read: TYPE1 access\n"));
- }
-
- draina();
- mcheck_expected(0) = 1;
- mcheck_taken(0) = 0;
- mb();
-
- /* Access configuration space. */
-
- /* Some SRMs step on these registers during a machine check. */
- asm volatile("ldl %0,%1; mb; mb" : "=r"(value) : "m"(*(vuip)addr)
- : "$9", "$10", "$11", "$12", "$13", "$14", "memory");
-
- if (mcheck_taken(0)) {
- mcheck_taken(0) = 0;
- value = 0xffffffffU;
- mb();
- }
- mcheck_expected(0) = 0;
- mb();
-
-#if 1
- /*
- * david.rusling@reo.mts.dec.com. This code is needed for the
- * EB64+ as it does not generate a machine check (why I don't
- * know). When we build kernels for one particular platform
- * then we can make this conditional on the type.
- */
- draina();
-
- /* Now look for any errors. */
- stat0 = *(vuip)APECS_IOC_DCSR;
- DBGC(("conf_read: APECS DCSR after read 0x%x\n", stat0));
-
- /* Is any error bit set? */
- if (stat0 & 0xffe0U) {
- /* If not NDEV, print status. */
- if (!(stat0 & 0x0800)) {
- printk("apecs.c:conf_read: got stat0=%x\n", stat0);
- }
-
- /* Reset error status. */
- *(vuip)APECS_IOC_DCSR = stat0;
- mb();
- wrmces(0x7); /* reset machine check */
- value = 0xffffffff;
- }
-#endif
-
- /* If Type1 access, must reset HAE #2 so normal IO space ops work. */
- if (type1) {
- *(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
- mb();
- }
- local_irq_restore(flags);
-
- return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value, unsigned char type1)
-{
- unsigned long flags;
- unsigned int stat0;
- unsigned int haxr2 = 0;
-
- local_irq_save(flags); /* avoid getting hit by machine check */
-
- /* Reset status register to avoid losing errors. */
- stat0 = *(vuip)APECS_IOC_DCSR;
- *(vuip)APECS_IOC_DCSR = stat0;
- mb();
-
- /* If Type1 access, must set HAE #2. */
- if (type1) {
- haxr2 = *(vuip)APECS_IOC_HAXR2;
- mb();
- *(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
- }
-
- draina();
- mcheck_expected(0) = 1;
- mb();
-
- /* Access configuration space. */
- *(vuip)addr = value;
- mb();
- mb(); /* magic */
- mcheck_expected(0) = 0;
- mb();
-
-#if 1
- /*
- * david.rusling@reo.mts.dec.com. This code is needed for the
- * EB64+ as it does not generate a machine check (why I don't
- * know). When we build kernels for one particular platform
- * then we can make this conditional on the type.
- */
- draina();
-
- /* Now look for any errors. */
- stat0 = *(vuip)APECS_IOC_DCSR;
-
- /* Is any error bit set? */
- if (stat0 & 0xffe0U) {
- /* If not NDEV, print status. */
- if (!(stat0 & 0x0800)) {
- printk("apecs.c:conf_write: got stat0=%x\n", stat0);
- }
-
- /* Reset error status. */
- *(vuip)APECS_IOC_DCSR = stat0;
- mb();
- wrmces(0x7); /* reset machine check */
- }
-#endif
-
- /* If Type1 access, must reset HAE #2 so normal IO space ops work. */
- if (type1) {
- *(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
- mb();
- }
- local_irq_restore(flags);
-}
-
-static int
-apecs_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- unsigned long addr, pci_addr;
- unsigned char type1;
- long mask;
- int shift;
-
- if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- mask = (size - 1) * 8;
- shift = (where & 3) * 8;
- addr = (pci_addr << 5) + mask + APECS_CONF;
- *value = conf_read(addr, type1) >> (shift);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-apecs_write_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 value)
-{
- unsigned long addr, pci_addr;
- unsigned char type1;
- long mask;
-
- if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- mask = (size - 1) * 8;
- addr = (pci_addr << 5) + mask + APECS_CONF;
- conf_write(addr, value << ((where & 3) * 8), type1);
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops apecs_pci_ops =
-{
- .read = apecs_read_config,
- .write = apecs_write_config,
-};
-\f
-void
-apecs_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
- wmb();
- *(vip)APECS_IOC_TBIA = 0;
- mb();
-}
-\f
-void __init
-apecs_init_arch(void)
-{
- struct pci_controller *hose;
-
- /*
- * Create our single hose.
- */
-
- pci_isa_hose = hose = alloc_pci_controller();
- hose->io_space = &ioport_resource;
- hose->mem_space = &iomem_resource;
- hose->index = 0;
-
- hose->sparse_mem_base = APECS_SPARSE_MEM - IDENT_ADDR;
- hose->dense_mem_base = APECS_DENSE_MEM - IDENT_ADDR;
- hose->sparse_io_base = APECS_IO - IDENT_ADDR;
- hose->dense_io_base = 0;
-
- /*
- * Set up the PCI to main memory translation windows.
- *
- * Window 1 is direct access 1GB at 1GB
- * Window 2 is scatter-gather 8MB at 8MB (for isa)
- */
- hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
- SMP_CACHE_BYTES);
- hose->sg_pci = NULL;
- __direct_map_base = 0x40000000;
- __direct_map_size = 0x40000000;
-
- *(vuip)APECS_IOC_PB1R = __direct_map_base | 0x00080000;
- *(vuip)APECS_IOC_PM1R = (__direct_map_size - 1) & 0xfff00000U;
- *(vuip)APECS_IOC_TB1R = 0;
-
- *(vuip)APECS_IOC_PB2R = hose->sg_isa->dma_base | 0x000c0000;
- *(vuip)APECS_IOC_PM2R = (hose->sg_isa->size - 1) & 0xfff00000;
- *(vuip)APECS_IOC_TB2R = virt_to_phys(hose->sg_isa->ptes) >> 1;
-
- apecs_pci_tbi(hose, 0, -1);
-
- /*
- * Finally, clear the HAXR2 register, which gets used
- * for PCI Config Space accesses. That is the way
- * we want to use it, and we do not want to depend on
- * what ARC or SRM might have left behind...
- */
- *(vuip)APECS_IOC_HAXR2 = 0;
- mb();
-}
-
-void
-apecs_pci_clr_err(void)
-{
- unsigned int jd;
-
- jd = *(vuip)APECS_IOC_DCSR;
- if (jd & 0xffe0L) {
- *(vuip)APECS_IOC_SEAR;
- *(vuip)APECS_IOC_DCSR = jd | 0xffe1L;
- mb();
- *(vuip)APECS_IOC_DCSR;
- }
- *(vuip)APECS_IOC_TBIA = (unsigned int)APECS_IOC_TBIA;
- mb();
- *(vuip)APECS_IOC_TBIA;
-}
-
-void
-apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
- struct el_common *mchk_header;
- struct el_apecs_procdata *mchk_procdata;
- struct el_apecs_sysdata_mcheck *mchk_sysdata;
-
- mchk_header = (struct el_common *)la_ptr;
-
- mchk_procdata = (struct el_apecs_procdata *)
- (la_ptr + mchk_header->proc_offset
- - sizeof(mchk_procdata->paltemp));
-
- mchk_sysdata = (struct el_apecs_sysdata_mcheck *)
- (la_ptr + mchk_header->sys_offset);
-
-
- /* Clear the error before any reporting. */
- mb();
- mb(); /* magic */
- draina();
- apecs_pci_clr_err();
- wrmces(0x7); /* reset machine check pending flag */
- mb();
-
- process_mcheck_info(vector, la_ptr, "APECS",
- (mcheck_expected(0)
- && (mchk_sysdata->epic_dcsr & 0x0c00UL)));
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/alpha/kernel/core_lca.c
- *
- * Written by David Mosberger (davidm@cs.arizona.edu) with some code
- * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
- * bios code.
- *
- * Code common to all LCA core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_lca.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-
-#include <asm/ptrace.h>
-#include <asm/irq_regs.h>
-#include <asm/smp.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-
-/*
- * BIOS32-style PCI interface:
- */
-
-/*
- * Machine check reasons. Defined according to PALcode sources
- * (osf.h and platform.h).
- */
-#define MCHK_K_TPERR 0x0080
-#define MCHK_K_TCPERR 0x0082
-#define MCHK_K_HERR 0x0084
-#define MCHK_K_ECC_C 0x0086
-#define MCHK_K_ECC_NC 0x0088
-#define MCHK_K_UNKNOWN 0x008A
-#define MCHK_K_CACKSOFT 0x008C
-#define MCHK_K_BUGCHECK 0x008E
-#define MCHK_K_OS_BUGCHECK 0x0090
-#define MCHK_K_DCPERR 0x0092
-#define MCHK_K_ICPERR 0x0094
-
-
-/*
- * Platform-specific machine-check reasons:
- */
-#define MCHK_K_SIO_SERR 0x204 /* all platforms so far */
-#define MCHK_K_SIO_IOCHK 0x206 /* all platforms so far */
-#define MCHK_K_DCSR 0x208 /* all but Noname */
-
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the LCA_IOC_CONF register
- * accordingly. It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
- * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- * 31:11 Device select bit.
- * 10:8 Function number
- * 7:2 Register number
- *
- * Type 1:
- *
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
- * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- * 31:24 reserved
- * 23:16 bus number (8 bits = 128 possible buses)
- * 15:11 Device number (5 bits)
- * 10:8 function number
- * 7:2 register number
- *
- * Notes:
- * The function number selects which function of a multi-function device
- * (e.g., SCSI and Ethernet).
- *
- * The register selects a DWORD (32 bit) register offset. Hence it
- * doesn't get shifted by 2 bits as we want to "drop" the bottom two
- * bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
- unsigned long *pci_addr)
-{
- unsigned long addr;
- u8 bus = pbus->number;
-
- if (bus == 0) {
- int device = device_fn >> 3;
- int func = device_fn & 0x7;
-
- /* Type 0 configuration cycle. */
-
- if (device > 12) {
- return -1;
- }
-
- *(vulp)LCA_IOC_CONF = 0;
- addr = (1 << (11 + device)) | (func << 8) | where;
- } else {
- /* Type 1 configuration cycle. */
- *(vulp)LCA_IOC_CONF = 1;
- addr = (bus << 16) | (device_fn << 8) | where;
- }
- *pci_addr = addr;
- return 0;
-}
-
-static unsigned int
-conf_read(unsigned long addr)
-{
- unsigned long flags, code, stat0;
- unsigned int value;
-
- local_irq_save(flags);
-
- /* Reset status register to avoid losing errors. */
- stat0 = *(vulp)LCA_IOC_STAT0;
- *(vulp)LCA_IOC_STAT0 = stat0;
- mb();
-
- /* Access configuration space. */
- value = *(vuip)addr;
- draina();
-
- stat0 = *(vulp)LCA_IOC_STAT0;
- if (stat0 & LCA_IOC_STAT0_ERR) {
- code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
- & LCA_IOC_STAT0_CODE_MASK);
- if (code != 1) {
- printk("lca.c:conf_read: got stat0=%lx\n", stat0);
- }
-
- /* Reset error status. */
- *(vulp)LCA_IOC_STAT0 = stat0;
- mb();
-
- /* Reset machine check. */
- wrmces(0x7);
-
- value = 0xffffffff;
- }
- local_irq_restore(flags);
- return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value)
-{
- unsigned long flags, code, stat0;
-
- local_irq_save(flags); /* avoid getting hit by machine check */
-
- /* Reset status register to avoid losing errors. */
- stat0 = *(vulp)LCA_IOC_STAT0;
- *(vulp)LCA_IOC_STAT0 = stat0;
- mb();
-
- /* Access configuration space. */
- *(vuip)addr = value;
- draina();
-
- stat0 = *(vulp)LCA_IOC_STAT0;
- if (stat0 & LCA_IOC_STAT0_ERR) {
- code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
- & LCA_IOC_STAT0_CODE_MASK);
- if (code != 1) {
- printk("lca.c:conf_write: got stat0=%lx\n", stat0);
- }
-
- /* Reset error status. */
- *(vulp)LCA_IOC_STAT0 = stat0;
- mb();
-
- /* Reset machine check. */
- wrmces(0x7);
- }
- local_irq_restore(flags);
-}
-
-static int
-lca_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- unsigned long addr, pci_addr;
- long mask;
- int shift;
-
- if (mk_conf_addr(bus, devfn, where, &pci_addr))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- shift = (where & 3) * 8;
- mask = (size - 1) * 8;
- addr = (pci_addr << 5) + mask + LCA_CONF;
- *value = conf_read(addr) >> (shift);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-lca_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
- u32 value)
-{
- unsigned long addr, pci_addr;
- long mask;
-
- if (mk_conf_addr(bus, devfn, where, &pci_addr))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- mask = (size - 1) * 8;
- addr = (pci_addr << 5) + mask + LCA_CONF;
- conf_write(addr, value << ((where & 3) * 8));
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops lca_pci_ops =
-{
- .read = lca_read_config,
- .write = lca_write_config,
-};
-\f
-void
-lca_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
- wmb();
- *(vulp)LCA_IOC_TBIA = 0;
- mb();
-}
-\f
-void __init
-lca_init_arch(void)
-{
- struct pci_controller *hose;
-
- /*
- * Create our single hose.
- */
-
- pci_isa_hose = hose = alloc_pci_controller();
- hose->io_space = &ioport_resource;
- hose->mem_space = &iomem_resource;
- hose->index = 0;
-
- hose->sparse_mem_base = LCA_SPARSE_MEM - IDENT_ADDR;
- hose->dense_mem_base = LCA_DENSE_MEM - IDENT_ADDR;
- hose->sparse_io_base = LCA_IO - IDENT_ADDR;
- hose->dense_io_base = 0;
-
- /*
- * Set up the PCI to main memory translation windows.
- *
- * Mimic the SRM settings for the direct-map window.
- * Window 0 is scatter-gather 8MB at 8MB (for isa).
- * Window 1 is direct access 1GB at 1GB.
- *
- * Note that we do not try to save any of the DMA window CSRs
- * before setting them, since we cannot read those CSRs on LCA.
- */
- hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
- SMP_CACHE_BYTES);
- hose->sg_pci = NULL;
- __direct_map_base = 0x40000000;
- __direct_map_size = 0x40000000;
-
- *(vulp)LCA_IOC_W_BASE0 = hose->sg_isa->dma_base | (3UL << 32);
- *(vulp)LCA_IOC_W_MASK0 = (hose->sg_isa->size - 1) & 0xfff00000;
- *(vulp)LCA_IOC_T_BASE0 = virt_to_phys(hose->sg_isa->ptes);
-
- *(vulp)LCA_IOC_W_BASE1 = __direct_map_base | (2UL << 32);
- *(vulp)LCA_IOC_W_MASK1 = (__direct_map_size - 1) & 0xfff00000;
- *(vulp)LCA_IOC_T_BASE1 = 0;
-
- *(vulp)LCA_IOC_TB_ENA = 0x80;
-
- lca_pci_tbi(hose, 0, -1);
-
- /*
- * Disable PCI parity for now. The NCR53c810 chip has
- * troubles meeting the PCI spec which results in
- * data parity errors.
- */
- *(vulp)LCA_IOC_PAR_DIS = 1UL<<5;
-
- /*
- * Finally, set up for restoring the correct HAE if using SRM.
- * Again, since we cannot read many of the CSRs on the LCA,
- * one of which happens to be the HAE, we save the value that
- * the SRM will expect...
- */
- if (alpha_using_srm)
- srm_hae = 0x80000000UL;
-}
-
-/*
- * Constants used during machine-check handling. I suppose these
- * could be moved into lca.h but I don't see much reason why anybody
- * else would want to use them.
- */
-
-#define ESR_EAV (1UL<< 0) /* error address valid */
-#define ESR_CEE (1UL<< 1) /* correctable error */
-#define ESR_UEE (1UL<< 2) /* uncorrectable error */
-#define ESR_WRE (1UL<< 3) /* write-error */
-#define ESR_SOR (1UL<< 4) /* error source */
-#define ESR_CTE (1UL<< 7) /* cache-tag error */
-#define ESR_MSE (1UL<< 9) /* multiple soft errors */
-#define ESR_MHE (1UL<<10) /* multiple hard errors */
-#define ESR_NXM (1UL<<12) /* non-existent memory */
-
-#define IOC_ERR ( 1<<4) /* ioc logs an error */
-#define IOC_CMD_SHIFT 0
-#define IOC_CMD (0xf<<IOC_CMD_SHIFT)
-#define IOC_CODE_SHIFT 8
-#define IOC_CODE (0xf<<IOC_CODE_SHIFT)
-#define IOC_LOST ( 1<<5)
-#define IOC_P_NBR ((__u32) ~((1<<13) - 1))
-
-static void
-mem_error(unsigned long esr, unsigned long ear)
-{
- printk(" %s %s error to %s occurred at address %x\n",
- ((esr & ESR_CEE) ? "Correctable" :
- (esr & ESR_UEE) ? "Uncorrectable" : "A"),
- (esr & ESR_WRE) ? "write" : "read",
- (esr & ESR_SOR) ? "memory" : "b-cache",
- (unsigned) (ear & 0x1ffffff8));
- if (esr & ESR_CTE) {
- printk(" A b-cache tag parity error was detected.\n");
- }
- if (esr & ESR_MSE) {
- printk(" Several other correctable errors occurred.\n");
- }
- if (esr & ESR_MHE) {
- printk(" Several other uncorrectable errors occurred.\n");
- }
- if (esr & ESR_NXM) {
- printk(" Attempted to access non-existent memory.\n");
- }
-}
-
-static void
-ioc_error(__u32 stat0, __u32 stat1)
-{
- static const char * const pci_cmd[] = {
- "Interrupt Acknowledge", "Special", "I/O Read", "I/O Write",
- "Rsvd 1", "Rsvd 2", "Memory Read", "Memory Write", "Rsvd3",
- "Rsvd4", "Configuration Read", "Configuration Write",
- "Memory Read Multiple", "Dual Address", "Memory Read Line",
- "Memory Write and Invalidate"
- };
- static const char * const err_name[] = {
- "exceeded retry limit", "no device", "bad data parity",
- "target abort", "bad address parity", "page table read error",
- "invalid page", "data error"
- };
- unsigned code = (stat0 & IOC_CODE) >> IOC_CODE_SHIFT;
- unsigned cmd = (stat0 & IOC_CMD) >> IOC_CMD_SHIFT;
-
- printk(" %s initiated PCI %s cycle to address %x"
- " failed due to %s.\n",
- code > 3 ? "PCI" : "CPU", pci_cmd[cmd], stat1, err_name[code]);
-
- if (code == 5 || code == 6) {
- printk(" (Error occurred at PCI memory address %x.)\n",
- (stat0 & ~IOC_P_NBR));
- }
- if (stat0 & IOC_LOST) {
- printk(" Other PCI errors occurred simultaneously.\n");
- }
-}
-
-void
-lca_machine_check(unsigned long vector, unsigned long la_ptr)
-{
- const char * reason;
- union el_lca el;
-
- el.c = (struct el_common *) la_ptr;
-
- wrmces(rdmces()); /* reset machine check pending flag */
-
- printk(KERN_CRIT "LCA machine check: vector=%#lx pc=%#lx code=%#x\n",
- vector, get_irq_regs()->pc, (unsigned int) el.c->code);
-
- /*
- * The first quadword after the common header always seems to
- * be the machine check reason---don't know why this isn't
- * part of the common header instead. In the case of a long
- * logout frame, the upper 32 bits is the machine check
- * revision level, which we ignore for now.
- */
- switch ((unsigned int) el.c->code) {
- case MCHK_K_TPERR: reason = "tag parity error"; break;
- case MCHK_K_TCPERR: reason = "tag control parity error"; break;
- case MCHK_K_HERR: reason = "access to non-existent memory"; break;
- case MCHK_K_ECC_C: reason = "correctable ECC error"; break;
- case MCHK_K_ECC_NC: reason = "non-correctable ECC error"; break;
- case MCHK_K_CACKSOFT: reason = "MCHK_K_CACKSOFT"; break;
- case MCHK_K_BUGCHECK: reason = "illegal exception in PAL mode"; break;
- case MCHK_K_OS_BUGCHECK: reason = "callsys in kernel mode"; break;
- case MCHK_K_DCPERR: reason = "d-cache parity error"; break;
- case MCHK_K_ICPERR: reason = "i-cache parity error"; break;
- case MCHK_K_SIO_SERR: reason = "SIO SERR occurred on PCI bus"; break;
- case MCHK_K_SIO_IOCHK: reason = "SIO IOCHK occurred on ISA bus"; break;
- case MCHK_K_DCSR: reason = "MCHK_K_DCSR"; break;
- case MCHK_K_UNKNOWN:
- default: reason = "unknown"; break;
- }
-
- switch (el.c->size) {
- case sizeof(struct el_lca_mcheck_short):
- printk(KERN_CRIT
- " Reason: %s (short frame%s, dc_stat=%#lx):\n",
- reason, el.c->retry ? ", retryable" : "",
- el.s->dc_stat);
- if (el.s->esr & ESR_EAV) {
- mem_error(el.s->esr, el.s->ear);
- }
- if (el.s->ioc_stat0 & IOC_ERR) {
- ioc_error(el.s->ioc_stat0, el.s->ioc_stat1);
- }
- break;
-
- case sizeof(struct el_lca_mcheck_long):
- printk(KERN_CRIT " Reason: %s (long frame%s):\n",
- reason, el.c->retry ? ", retryable" : "");
- printk(KERN_CRIT
- " reason: %#lx exc_addr: %#lx dc_stat: %#lx\n",
- el.l->pt[0], el.l->exc_addr, el.l->dc_stat);
- printk(KERN_CRIT " car: %#lx\n", el.l->car);
- if (el.l->esr & ESR_EAV) {
- mem_error(el.l->esr, el.l->ear);
- }
- if (el.l->ioc_stat0 & IOC_ERR) {
- ioc_error(el.l->ioc_stat0, el.l->ioc_stat1);
- }
- break;
-
- default:
- printk(KERN_CRIT " Unknown errorlog size %d\n", el.c->size);
- }
-
- /* Dump the logout area to give all info. */
-#ifdef CONFIG_VERBOSE_MCHECK
- if (alpha_verbose_mcheck > 1) {
- unsigned long * ptr = (unsigned long *) la_ptr;
- long i;
- for (i = 0; i < el.c->size / sizeof(long); i += 2) {
- printk(KERN_CRIT " +%8lx %016lx %016lx\n",
- i*sizeof(long), ptr[i], ptr[i+1]);
- }
- }
-#endif /* CONFIG_VERBOSE_MCHECK */
-}
#if defined(CONFIG_ALPHA_GENERIC)
# define IACK_SC alpha_mv.iack_sc
-#elif defined(CONFIG_ALPHA_APECS)
-# define IACK_SC APECS_IACK_SC
-#elif defined(CONFIG_ALPHA_LCA)
-# define IACK_SC LCA_IACK_SC
#elif defined(CONFIG_ALPHA_CIA)
# define IACK_SC CIA_IACK_SC
#elif defined(CONFIG_ALPHA_PYXIS)
unsigned int align_entry;
};
-#if defined(CONFIG_ALPHA_SRM) && \
- (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA) || \
- defined(CONFIG_ALPHA_AVANTI))
+#if defined(CONFIG_ALPHA_SRM) && defined(CONFIG_ALPHA_CIA)
# define NEED_SRM_SAVE_RESTORE
#else
# undef NEED_SRM_SAVE_RESTORE
struct pci_controller;
struct pci_bus;
-/* core_apecs.c */
-extern struct pci_ops apecs_pci_ops;
-extern void apecs_init_arch(void);
-extern void apecs_pci_clr_err(void);
-extern void apecs_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void apecs_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-
/* core_cia.c */
extern struct pci_ops cia_pci_ops;
extern void cia_init_pci(void);
extern void irongate_init_arch(void);
#define irongate_pci_tbi ((void *)0)
-/* core_lca.c */
-extern struct pci_ops lca_pci_ops;
-extern void lca_init_arch(void);
-extern void lca_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-
/* core_marvel.c */
extern struct pci_ops marvel_pci_ops;
extern void marvel_init_arch(void);
asm(".weak "#X)
WEAK(alcor_mv);
-WEAK(alphabook1_mv);
-WEAK(avanti_mv);
-WEAK(cabriolet_mv);
WEAK(clipper_mv);
WEAK(dp264_mv);
WEAK(eb164_mv);
-WEAK(eb64p_mv);
-WEAK(eb66_mv);
-WEAK(eb66p_mv);
WEAK(eiger_mv);
WEAK(lx164_mv);
WEAK(marvel_ev7_mv);
WEAK(miata_mv);
-WEAK(mikasa_mv);
WEAK(mikasa_primo_mv);
WEAK(monet_mv);
WEAK(nautilus_mv);
-WEAK(noname_mv);
-WEAK(noritake_mv);
WEAK(noritake_primo_mv);
-WEAK(p2k_mv);
WEAK(pc164_mv);
WEAK(privateer_mv);
WEAK(rawhide_mv);
WEAK(titan_mv);
WEAK(webbrick_mv);
WEAK(wildfire_mv);
-WEAK(xl_mv);
WEAK(xlt_mv);
#undef WEAK
static char alcor_names[][16] = {"Alcor", "Maverick", "Bret"};
static int alcor_indices[] = {0,0,0,1,1,1,0,0,0,0,0,0,2,2,2,2,2,2};
-static char eb64p_names[][16] = {"EB64+", "Cabriolet", "AlphaPCI64"};
-static int eb64p_indices[] = {0,0,1,2};
-
-static char eb66_names[][8] = {"EB66", "EB66+"};
-static int eb66_indices[] = {0,0,1};
-
static char marvel_names[][16] = {
"Marvel/EV7"
};
NULL, /* Morgan */
NULL, /* Sable -- see below. */
NULL, /* Medulla */
- &noname_mv,
+ NULL, /* Noname */
NULL, /* Turbolaser */
- &avanti_mv,
+ NULL, /* Avanti */
NULL, /* Mustang */
NULL, /* Alcor, Bret, Maverick. HWRPB inaccurate? */
NULL, /* Tradewind */
NULL, /* Mikasa -- see below. */
NULL, /* EB64 */
- NULL, /* EB66 -- see variation. */
- NULL, /* EB64+ -- see variation. */
- &alphabook1_mv,
+ NULL, /* EB66 */
+ NULL, /* EB64+ */
+ NULL, /* Alphabook1 */
&rawhide_mv,
NULL, /* K2 */
NULL, /* Lynx */
- &xl_mv,
+ NULL, /* XL */
NULL, /* EB164 -- see variation. */
NULL, /* Noritake -- see below. */
NULL, /* Cortex */
&eb164_mv, &pc164_mv, &lx164_mv, &sx164_mv, &rx164_mv
};
- static struct alpha_machine_vector *eb64p_vecs[] __initdata =
- {
- &eb64p_mv,
- &cabriolet_mv,
- &cabriolet_mv /* AlphaPCI64 */
- };
-
- static struct alpha_machine_vector *eb66_vecs[] __initdata =
- {
- &eb66_mv,
- &eb66p_mv
- };
-
static struct alpha_machine_vector *marvel_vecs[] __initdata =
{
&marvel_ev7_mv,
if (vec == &eb164_mv && cpu == EV56_CPU)
vec = &pc164_mv;
break;
- case ST_DEC_EB64P:
- if (member < ARRAY_SIZE(eb64p_indices))
- vec = eb64p_vecs[eb64p_indices[member]];
- break;
- case ST_DEC_EB66:
- if (member < ARRAY_SIZE(eb66_indices))
- vec = eb66_vecs[eb66_indices[member]];
- break;
case ST_DEC_MARVEL:
if (member < ARRAY_SIZE(marvel_indices))
vec = marvel_vecs[marvel_indices[member]];
vec = tsunami_vecs[tsunami_indices[member]];
break;
case ST_DEC_1000:
- if (cpu == EV5_CPU || cpu == EV56_CPU)
- vec = &mikasa_primo_mv;
- else
- vec = &mikasa_mv;
+ vec = &mikasa_primo_mv;
break;
case ST_DEC_NORITAKE:
- if (cpu == EV5_CPU || cpu == EV56_CPU)
- vec = &noritake_primo_mv;
- else
- vec = &noritake_mv;
+ vec = &noritake_primo_mv;
break;
case ST_DEC_2100_A500:
vec = &sable_gamma_mv;
static struct alpha_machine_vector *all_vecs[] __initdata =
{
&alcor_mv,
- &alphabook1_mv,
- &avanti_mv,
- &cabriolet_mv,
&clipper_mv,
&dp264_mv,
&eb164_mv,
- &eb64p_mv,
- &eb66_mv,
- &eb66p_mv,
&eiger_mv,
&lx164_mv,
&miata_mv,
- &mikasa_mv,
&mikasa_primo_mv,
&monet_mv,
&nautilus_mv,
- &noname_mv,
- &noritake_mv,
&noritake_primo_mv,
- &p2k_mv,
&pc164_mv,
&privateer_mv,
&rawhide_mv,
&takara_mv,
&webbrick_mv,
&wildfire_mv,
- &xl_mv,
&xlt_mv
};
if (member < ARRAY_SIZE(alcor_indices))
*variation_name = alcor_names[alcor_indices[member]];
break;
- case ST_DEC_EB64P:
- if (member < ARRAY_SIZE(eb64p_indices))
- *variation_name = eb64p_names[eb64p_indices[member]];
- break;
- case ST_DEC_EB66:
- if (member < ARRAY_SIZE(eb66_indices))
- *variation_name = eb66_names[eb66_indices[member]];
- break;
case ST_DEC_MARVEL:
if (member < ARRAY_SIZE(marvel_indices))
*variation_name = marvel_names[marvel_indices[member]];
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
-#include <asm/core_apecs.h>
#include <asm/core_cia.h>
-#include <asm/core_lca.h>
#include <asm/tlbflush.h>
#include "proto.h"
}
}
-static inline void __init
-cabriolet_init_pci(void)
-{
- common_init_pci();
- cabriolet_enable_ide();
-}
-
static inline void __init
cia_cab_init_pci(void)
{
* The System Vector
*/
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
-struct alpha_machine_vector cabriolet_mv __initmv = {
- .vector_name = "Cabriolet",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = apecs_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 35,
- .device_interrupt = cabriolet_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = cabriolet_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = cabriolet_init_pci,
- .pci_map_irq = cabriolet_map_irq,
- .pci_swizzle = common_swizzle,
-};
-#ifndef CONFIG_ALPHA_EB64P
-ALIAS_MV(cabriolet)
-#endif
-#endif
-
#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB164)
struct alpha_machine_vector eb164_mv __initmv = {
.vector_name = "EB164",
ALIAS_MV(eb164)
#endif
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66P)
-struct alpha_machine_vector eb66p_mv __initmv = {
- .vector_name = "EB66+",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_LCA_IO,
- .machine_check = lca_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 35,
- .device_interrupt = cabriolet_device_interrupt,
-
- .init_arch = lca_init_arch,
- .init_irq = cabriolet_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = cabriolet_init_pci,
- .pci_map_irq = eb66p_map_irq,
- .pci_swizzle = common_swizzle,
-};
-ALIAS_MV(eb66p)
-#endif
-
#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LX164)
struct alpha_machine_vector lx164_mv __initmv = {
.vector_name = "LX164",
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/alpha/kernel/sys_eb64p.c
- *
- * Copyright (C) 1995 David A Rusling
- * Copyright (C) 1996 Jay A Estabrook
- * Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the EB64+ and EB66.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#include <asm/core_lca.h>
-#include <asm/hwrpb.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/* Note mask bit is true for DISABLED irqs. */
-static unsigned int cached_irq_mask = -1;
-
-static inline void
-eb64p_update_irq_hw(unsigned int irq, unsigned long mask)
-{
- outb(mask >> (irq >= 24 ? 24 : 16), (irq >= 24 ? 0x27 : 0x26));
-}
-
-static inline void
-eb64p_enable_irq(struct irq_data *d)
-{
- eb64p_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
-}
-
-static void
-eb64p_disable_irq(struct irq_data *d)
-{
- eb64p_update_irq_hw(d->irq, cached_irq_mask |= 1 << d->irq);
-}
-
-static struct irq_chip eb64p_irq_type = {
- .name = "EB64P",
- .irq_unmask = eb64p_enable_irq,
- .irq_mask = eb64p_disable_irq,
- .irq_mask_ack = eb64p_disable_irq,
-};
-
-static void
-eb64p_device_interrupt(unsigned long vector)
-{
- unsigned long pld;
- unsigned int i;
-
- /* Read the interrupt summary registers */
- pld = inb(0x26) | (inb(0x27) << 8);
-
- /*
- * Now, for every possible bit set, work through
- * them and call the appropriate interrupt handler.
- */
- while (pld) {
- i = ffz(~pld);
- pld &= pld - 1; /* clear least bit set */
-
- if (i == 5) {
- isa_device_interrupt(vector);
- } else {
- handle_irq(16 + i);
- }
- }
-}
-
-static void __init
-eb64p_init_irq(void)
-{
- long i;
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
- /*
- * CABRIO SRM may not set variation correctly, so here we test
- * the high word of the interrupt summary register for the RAZ
- * bits, and hope that a true EB64+ would read all ones...
- */
- if (inw(0x806) != 0xffff) {
- extern struct alpha_machine_vector cabriolet_mv;
-
- printk("Detected Cabriolet: correcting HWRPB.\n");
-
- hwrpb->sys_variation |= 2L << 10;
- hwrpb_update_checksum(hwrpb);
-
- alpha_mv = cabriolet_mv;
- alpha_mv.init_irq();
- return;
- }
-#endif /* GENERIC */
-
- outb(0xff, 0x26);
- outb(0xff, 0x27);
-
- init_i8259a_irqs();
-
- for (i = 16; i < 32; ++i) {
- irq_set_chip_and_handler(i, &eb64p_irq_type, handle_level_irq);
- irq_set_status_flags(i, IRQ_LEVEL);
- }
-
- common_init_isa_dma();
- if (request_irq(16 + 5, no_action, 0, "isa-cascade", NULL))
- pr_err("Failed to register isa-cascade interrupt\n");
-}
-
-/*
- * PCI Fixup configuration.
- *
- * There are two 8 bit external summary registers as follows:
- *
- * Summary @ 0x26:
- * Bit Meaning
- * 0 Interrupt Line A from slot 0
- * 1 Interrupt Line A from slot 1
- * 2 Interrupt Line B from slot 0
- * 3 Interrupt Line B from slot 1
- * 4 Interrupt Line C from slot 0
- * 5 Interrupt line from the two ISA PICs
- * 6 Tulip
- * 7 NCR SCSI
- *
- * Summary @ 0x27
- * Bit Meaning
- * 0 Interrupt Line C from slot 1
- * 1 Interrupt Line D from slot 0
- * 2 Interrupt Line D from slot 1
- * 3 RAZ
- * 4 RAZ
- * 5 RAZ
- * 6 RAZ
- * 7 RAZ
- *
- * The device to slot mapping looks like:
- *
- * Slot Device
- * 5 NCR SCSI controller
- * 6 PCI on board slot 0
- * 7 PCI on board slot 1
- * 8 Intel SIO PCI-ISA bridge chip
- * 9 Tulip - DECchip 21040 Ethernet controller
- *
- *
- * This two layered interrupt approach means that we allocate IRQ 16 and
- * above for PCI interrupts. The IRQ relates to which bit the interrupt
- * comes in on. This makes interrupt processing much easier.
- */
-
-static int
-eb64p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- static char irq_tab[5][5] = {
- /*INT INTA INTB INTC INTD */
- {16+7, 16+7, 16+7, 16+7, 16+7}, /* IdSel 5, slot ?, ?? */
- {16+0, 16+0, 16+2, 16+4, 16+9}, /* IdSel 6, slot ?, ?? */
- {16+1, 16+1, 16+3, 16+8, 16+10}, /* IdSel 7, slot ?, ?? */
- { -1, -1, -1, -1, -1}, /* IdSel 8, SIO */
- {16+6, 16+6, 16+6, 16+6, 16+6}, /* IdSel 9, TULIP */
- };
- const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
- return COMMON_TABLE_LOOKUP;
-}
-
-
-/*
- * The System Vector
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB64P)
-struct alpha_machine_vector eb64p_mv __initmv = {
- .vector_name = "EB64+",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = apecs_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 32,
- .device_interrupt = eb64p_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = eb64p_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = common_init_pci,
- .kill_arch = NULL,
- .pci_map_irq = eb64p_map_irq,
- .pci_swizzle = common_swizzle,
-};
-ALIAS_MV(eb64p)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66)
-struct alpha_machine_vector eb66_mv __initmv = {
- .vector_name = "EB66",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_LCA_IO,
- .machine_check = lca_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 32,
- .device_interrupt = eb64p_device_interrupt,
-
- .init_arch = lca_init_arch,
- .init_irq = eb64p_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = common_init_pci,
- .pci_map_irq = eb64p_map_irq,
- .pci_swizzle = common_swizzle,
-};
-ALIAS_MV(eb66)
-#endif
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
-#include <asm/core_apecs.h>
#include <asm/core_cia.h>
#include <asm/tlbflush.h>
}
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-static void
-mikasa_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-#define MCHK_NO_DEVSEL 0x205U
-#define MCHK_NO_TABT 0x204U
-
- struct el_common *mchk_header;
- unsigned int code;
-
- mchk_header = (struct el_common *)la_ptr;
-
- /* Clear the error before any reporting. */
- mb();
- mb(); /* magic */
- draina();
- apecs_pci_clr_err();
- wrmces(0x7);
- mb();
-
- code = mchk_header->code;
- process_mcheck_info(vector, la_ptr, "MIKASA APECS",
- (mcheck_expected(0)
- && (code == MCHK_NO_DEVSEL
- || code == MCHK_NO_TABT)));
-}
-#endif
-
-
/*
* The System Vector
*/
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector mikasa_mv __initmv = {
- .vector_name = "Mikasa",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = mikasa_apecs_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 32,
- .device_interrupt = mikasa_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = mikasa_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = common_init_pci,
- .pci_map_irq = mikasa_map_irq,
- .pci_swizzle = common_swizzle,
-};
-ALIAS_MV(mikasa)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
struct alpha_machine_vector mikasa_primo_mv __initmv = {
.vector_name = "Mikasa-Primo",
DO_EV5_MMU,
.pci_swizzle = common_swizzle,
};
ALIAS_MV(mikasa_primo)
-#endif
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
-#include <asm/core_apecs.h>
#include <asm/core_cia.h>
#include <asm/tlbflush.h>
return slot;
}
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-static void
-noritake_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-#define MCHK_NO_DEVSEL 0x205U
-#define MCHK_NO_TABT 0x204U
-
- struct el_common *mchk_header;
- unsigned int code;
-
- mchk_header = (struct el_common *)la_ptr;
-
- /* Clear the error before any reporting. */
- mb();
- mb(); /* magic */
- draina();
- apecs_pci_clr_err();
- wrmces(0x7);
- mb();
-
- code = mchk_header->code;
- process_mcheck_info(vector, la_ptr, "NORITAKE APECS",
- (mcheck_expected(0)
- && (code == MCHK_NO_DEVSEL
- || code == MCHK_NO_TABT)));
-}
-#endif
-
-
-/*
- * The System Vectors
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector noritake_mv __initmv = {
- .vector_name = "Noritake",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = noritake_apecs_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = EISA_DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 48,
- .device_interrupt = noritake_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = noritake_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = common_init_pci,
- .pci_map_irq = noritake_map_irq,
- .pci_swizzle = noritake_swizzle,
-};
-ALIAS_MV(noritake)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
struct alpha_machine_vector noritake_primo_mv __initmv = {
.vector_name = "Noritake-Primo",
DO_EV5_MMU,
.pci_swizzle = noritake_swizzle,
};
ALIAS_MV(noritake_primo)
-#endif
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/alpha/kernel/sys_sio.c
- *
- * Copyright (C) 1995 David A Rusling
- * Copyright (C) 1996 Jay A Estabrook
- * Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code for all boards that route the PCI interrupts through the SIO
- * PCI/ISA bridge. This includes Noname (AXPpci33), Multia (UDB),
- * Kenetics's Platform 2000, Avanti (AlphaStation), XL, and AlphaBook1.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/screen_info.h>
-
-#include <asm/compiler.h>
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#include <asm/core_lca.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-#include "pc873xx.h"
-
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-/* Save LCA configuration data as the console had it set up. */
-struct
-{
- unsigned int orig_route_tab; /* for SAVE/RESTORE */
-} saved_config __attribute((common));
-#endif
-
-
-static void __init
-sio_init_irq(void)
-{
- if (alpha_using_srm)
- alpha_mv.device_interrupt = srm_device_interrupt;
-
- init_i8259a_irqs();
- common_init_isa_dma();
-}
-
-static inline void __init
-alphabook1_init_arch(void)
-{
-#ifdef CONFIG_VGA_CONSOLE
- /* The AlphaBook1 has LCD video fixed at 800x600,
- 37 rows and 100 cols. */
- vgacon_screen_info.orig_y = 37;
- vgacon_screen_info.orig_video_cols = 100;
- vgacon_screen_info.orig_video_lines = 37;
-#endif
-
- lca_init_arch();
-}
-
-
-/*
- * sio_route_tab selects irq routing in PCI/ISA bridge so that:
- * PIRQ0 -> irq 15
- * PIRQ1 -> irq 9
- * PIRQ2 -> irq 10
- * PIRQ3 -> irq 11
- *
- * This probably ought to be configurable via MILO. For
- * example, sound boards seem to like using IRQ 9.
- *
- * This is NOT how we should do it. PIRQ0-X should have
- * their own IRQs, the way intel uses the IO-APIC IRQs.
- */
-
-static void __init
-sio_pci_route(void)
-{
- unsigned int orig_route_tab;
-
- /* First, ALWAYS read and print the original setting. */
- pci_bus_read_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
- &orig_route_tab);
- printk("%s: PIRQ original 0x%x new 0x%x\n", __func__,
- orig_route_tab, alpha_mv.sys.sio.route_tab);
-
-#if defined(ALPHA_RESTORE_SRM_SETUP)
- saved_config.orig_route_tab = orig_route_tab;
-#endif
-
- /* Now override with desired setting. */
- pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
- alpha_mv.sys.sio.route_tab);
-}
-
-static bool sio_pci_dev_irq_needs_level(const struct pci_dev *dev)
-{
- if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) &&
- (dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA))
- return false;
-
- return true;
-}
-
-static unsigned int __init
-sio_collect_irq_levels(void)
-{
- unsigned int level_bits = 0;
- struct pci_dev *dev = NULL;
-
- /* Iterate through the devices, collecting IRQ levels. */
- for_each_pci_dev(dev) {
- if (!sio_pci_dev_irq_needs_level(dev))
- continue;
-
- if (dev->irq)
- level_bits |= (1 << dev->irq);
- }
- return level_bits;
-}
-
-static void __sio_fixup_irq_levels(unsigned int level_bits, bool reset)
-{
- unsigned int old_level_bits;
-
- /*
- * Now, make all PCI interrupts level sensitive. Notice:
- * these registers must be accessed byte-wise. inw()/outw()
- * don't work.
- *
- * Make sure to turn off any level bits set for IRQs 9,10,11,15,
- * so that the only bits getting set are for devices actually found.
- * Note that we do preserve the remainder of the bits, which we hope
- * will be set correctly by ARC/SRM.
- *
- * Note: we at least preserve any level-set bits on AlphaBook1
- */
- old_level_bits = inb(0x4d0) | (inb(0x4d1) << 8);
-
- if (reset)
- old_level_bits &= 0x71ff;
-
- level_bits |= old_level_bits;
-
- outb((level_bits >> 0) & 0xff, 0x4d0);
- outb((level_bits >> 8) & 0xff, 0x4d1);
-}
-
-static inline void
-sio_fixup_irq_levels(unsigned int level_bits)
-{
- __sio_fixup_irq_levels(level_bits, true);
-}
-
-static inline int
-noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- /*
- * The Noname board has 5 PCI slots with each of the 4
- * interrupt pins routed to different pins on the PCI/ISA
- * bridge (PIRQ0-PIRQ3). The table below is based on
- * information available at:
- *
- * http://ftp.digital.com/pub/DEC/axppci/ref_interrupts.txt
- *
- * I have no information on the Avanti interrupt routing, but
- * the routing seems to be identical to the Noname except
- * that the Avanti has an additional slot whose routing I'm
- * unsure of.
- *
- * pirq_tab[0] is a fake entry to deal with old PCI boards
- * that have the interrupt pin number hardwired to 0 (meaning
- * that they use the default INTA line, if they are interrupt
- * driven at all).
- */
- static char irq_tab[][5] = {
- /*INT A B C D */
- { 3, 3, 3, 3, 3}, /* idsel 6 (53c810) */
- {-1, -1, -1, -1, -1}, /* idsel 7 (SIO: PCI/ISA bridge) */
- { 2, 2, -1, -1, -1}, /* idsel 8 (Hack: slot closest ISA) */
- {-1, -1, -1, -1, -1}, /* idsel 9 (unused) */
- {-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
- { 0, 0, 2, 1, 0}, /* idsel 11 KN25_PCI_SLOT0 */
- { 1, 1, 0, 2, 1}, /* idsel 12 KN25_PCI_SLOT1 */
- { 2, 2, 1, 0, 2}, /* idsel 13 KN25_PCI_SLOT2 */
- { 0, 0, 0, 0, 0}, /* idsel 14 AS255 TULIP */
- };
- const long min_idsel = 6, max_idsel = 14, irqs_per_slot = 5;
- int irq = COMMON_TABLE_LOOKUP, tmp;
- tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
-
- irq = irq >= 0 ? tmp : -1;
-
- /* Fixup IRQ level if an actual IRQ mapping is detected */
- if (sio_pci_dev_irq_needs_level(dev) && irq >= 0)
- __sio_fixup_irq_levels(1 << irq, false);
-
- return irq;
-}
-
-static inline int
-p2k_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- static char irq_tab[][5] = {
- /*INT A B C D */
- { 0, 0, -1, -1, -1}, /* idsel 6 (53c810) */
- {-1, -1, -1, -1, -1}, /* idsel 7 (SIO: PCI/ISA bridge) */
- { 1, 1, 2, 3, 0}, /* idsel 8 (slot A) */
- { 2, 2, 3, 0, 1}, /* idsel 9 (slot B) */
- {-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
- {-1, -1, -1, -1, -1}, /* idsel 11 (unused) */
- { 3, 3, -1, -1, -1}, /* idsel 12 (CMD0646) */
- };
- const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5;
- int irq = COMMON_TABLE_LOOKUP, tmp;
- tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
- return irq >= 0 ? tmp : -1;
-}
-
-static inline void __init
-noname_init_pci(void)
-{
- common_init_pci();
- sio_pci_route();
- sio_fixup_irq_levels(sio_collect_irq_levels());
-
- if (pc873xx_probe() == -1) {
- printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
- } else {
- printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
- pc873xx_get_model(), pc873xx_get_base());
-
- /* Enabling things in the Super IO chip doesn't actually
- * configure and enable things, the legacy drivers still
- * need to do the actual configuration and enabling.
- * This only unblocks them.
- */
-
-#if !defined(CONFIG_ALPHA_AVANTI)
- /* Don't bother on the Avanti family.
- * None of them had on-board IDE.
- */
- pc873xx_enable_ide();
-#endif
- pc873xx_enable_epp19();
- }
-}
-
-static inline void __init
-alphabook1_init_pci(void)
-{
- struct pci_dev *dev;
- unsigned char orig, config;
-
- common_init_pci();
- sio_pci_route();
-
- /*
- * On the AlphaBook1, the PCMCIA chip (Cirrus 6729)
- * is sensitive to PCI bus bursts, so we must DISABLE
- * burst mode for the NCR 8xx SCSI... :-(
- *
- * Note that the NCR810 SCSI driver must preserve the
- * setting of the bit in order for this to work. At the
- * moment (2.0.29), ncr53c8xx.c does NOT do this, but
- * 53c7,8xx.c DOES.
- */
-
- dev = NULL;
- while ((dev = pci_get_device(PCI_VENDOR_ID_NCR, PCI_ANY_ID, dev))) {
- if (dev->device == PCI_DEVICE_ID_NCR_53C810
- || dev->device == PCI_DEVICE_ID_NCR_53C815
- || dev->device == PCI_DEVICE_ID_NCR_53C820
- || dev->device == PCI_DEVICE_ID_NCR_53C825) {
- unsigned long io_port;
- unsigned char ctest4;
-
- io_port = dev->resource[0].start;
- ctest4 = inb(io_port+0x21);
- if (!(ctest4 & 0x80)) {
- printk("AlphaBook1 NCR init: setting"
- " burst disable\n");
- outb(ctest4 | 0x80, io_port+0x21);
- }
- }
- }
-
- /* Do not set *ANY* level triggers for AlphaBook1. */
- sio_fixup_irq_levels(0);
-
- /* Make sure that register PR1 indicates 1Mb mem */
- outb(0x0f, 0x3ce); orig = inb(0x3cf); /* read PR5 */
- outb(0x0f, 0x3ce); outb(0x05, 0x3cf); /* unlock PR0-4 */
- outb(0x0b, 0x3ce); config = inb(0x3cf); /* read PR1 */
- if ((config & 0xc0) != 0xc0) {
- printk("AlphaBook1 VGA init: setting 1Mb memory\n");
- config |= 0xc0;
- outb(0x0b, 0x3ce); outb(config, 0x3cf); /* write PR1 */
- }
- outb(0x0f, 0x3ce); outb(orig, 0x3cf); /* (re)lock PR0-4 */
-}
-
-static void
-sio_kill_arch(int mode)
-{
-#if defined(ALPHA_RESTORE_SRM_SETUP)
- /* Since we cannot read the PCI DMA Window CSRs, we
- * cannot restore them here.
- *
- * However, we CAN read the PIRQ route register, so restore it
- * now...
- */
- pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
- saved_config.orig_route_tab);
-#endif
-}
-
-
-/*
- * The System Vectors
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_BOOK1)
-struct alpha_machine_vector alphabook1_mv __initmv = {
- .vector_name = "AlphaBook1",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_LCA_IO,
- .machine_check = lca_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 16,
- .device_interrupt = isa_device_interrupt,
-
- .init_arch = alphabook1_init_arch,
- .init_irq = sio_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = alphabook1_init_pci,
- .kill_arch = sio_kill_arch,
- .pci_map_irq = noname_map_irq,
- .pci_swizzle = common_swizzle,
-
- .sys = { .sio = {
- /* NCR810 SCSI is 14, PCMCIA controller is 15. */
- .route_tab = 0x0e0f0a0a,
- }}
-};
-ALIAS_MV(alphabook1)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_AVANTI_CH)
-struct alpha_machine_vector avanti_mv __initmv = {
- .vector_name = "Avanti",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = apecs_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 16,
- .device_interrupt = isa_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = sio_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = noname_init_pci,
- .kill_arch = sio_kill_arch,
- .pci_map_irq = noname_map_irq,
- .pci_swizzle = common_swizzle,
-
- .sys = { .sio = {
- .route_tab = 0x0b0a050f, /* leave 14 for IDE, 9 for SND */
- }}
-};
-ALIAS_MV(avanti)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_NONAME_CH)
-struct alpha_machine_vector noname_mv __initmv = {
- .vector_name = "Noname",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_LCA_IO,
- .machine_check = lca_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 16,
- .device_interrupt = srm_device_interrupt,
-
- .init_arch = lca_init_arch,
- .init_irq = sio_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = noname_init_pci,
- .kill_arch = sio_kill_arch,
- .pci_map_irq = noname_map_irq,
- .pci_swizzle = common_swizzle,
-
- .sys = { .sio = {
- /* For UDB, the only available PCI slot must not map to IRQ 9,
- since that's the builtin MSS sound chip. That PCI slot
- will map to PIRQ1 (for INTA at least), so we give it IRQ 15
- instead.
-
- Unfortunately we have to do this for NONAME as well, since
- they are co-indicated when the platform type "Noname" is
- selected... :-( */
-
- .route_tab = 0x0b0a0f0d,
- }}
-};
-ALIAS_MV(noname)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_P2K)
-struct alpha_machine_vector p2k_mv __initmv = {
- .vector_name = "Platform2000",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_LCA_IO,
- .machine_check = lca_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 16,
- .device_interrupt = srm_device_interrupt,
-
- .init_arch = lca_init_arch,
- .init_irq = sio_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = noname_init_pci,
- .kill_arch = sio_kill_arch,
- .pci_map_irq = p2k_map_irq,
- .pci_swizzle = common_swizzle,
-
- .sys = { .sio = {
- .route_tab = 0x0b0a090f,
- }}
-};
-ALIAS_MV(p2k)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_XL)
-struct alpha_machine_vector xl_mv __initmv = {
- .vector_name = "XL",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = apecs_machine_check,
- .max_isa_dma_address = ALPHA_XL_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = XL_DEFAULT_MEM_BASE,
-
- .nr_irqs = 16,
- .device_interrupt = isa_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = sio_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = noname_init_pci,
- .kill_arch = sio_kill_arch,
- .pci_map_irq = noname_map_irq,
- .pci_swizzle = common_swizzle,
-
- .sys = { .sio = {
- .route_tab = 0x0b0a090f,
- }}
-};
-ALIAS_MV(xl)
-#endif
projects / thirdparty / kernel / linux.git / commitdiff
