--- /dev/null
+From adb1fe9ae2ee6ef6bc10f3d5a588020e7664dfa7 Mon Sep 17 00:00:00 2001
+From: Josh Poimboeuf <jpoimboe@redhat.com>
+Date: Tue, 25 Oct 2016 09:51:14 -0500
+Subject: mm/page_alloc: Remove kernel address exposure in free_reserved_area()
+
+From: Josh Poimboeuf <jpoimboe@redhat.com>
+
+commit adb1fe9ae2ee6ef6bc10f3d5a588020e7664dfa7 upstream.
+
+Linus suggested we try to remove some of the low-hanging fruit related
+to kernel address exposure in dmesg. The only leaks I see on my local
+system are:
+
+ Freeing SMP alternatives memory: 32K (ffffffff9e309000 - ffffffff9e311000)
+ Freeing initrd memory: 10588K (ffffa0b736b42000 - ffffa0b737599000)
+ Freeing unused kernel memory: 3592K (ffffffff9df87000 - ffffffff9e309000)
+ Freeing unused kernel memory: 1352K (ffffa0b7288ae000 - ffffa0b728a00000)
+ Freeing unused kernel memory: 632K (ffffa0b728d62000 - ffffa0b728e00000)
+
+Linus says:
+
+ "I suspect we should just remove [the addresses in the 'Freeing'
+ messages]. I'm sure they are useful in theory, but I suspect they
+ were more useful back when the whole "free init memory" was
+ originally done.
+
+ These days, if we have a use-after-free, I suspect the init-mem
+ situation is the easiest situation by far. Compared to all the dynamic
+ allocations which are much more likely to show it anyway. So having
+ debug output for that case is likely not all that productive."
+
+With this patch the freeing messages now look like this:
+
+ Freeing SMP alternatives memory: 32K
+ Freeing initrd memory: 10588K
+ Freeing unused kernel memory: 3592K
+ Freeing unused kernel memory: 1352K
+ Freeing unused kernel memory: 632K
+
+Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
+Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
+Cc: Andy Lutomirski <luto@kernel.org>
+Cc: Borislav Petkov <bp@alien8.de>
+Cc: Brian Gerst <brgerst@gmail.com>
+Cc: Denys Vlasenko <dvlasenk@redhat.com>
+Cc: H. Peter Anvin <hpa@zytor.com>
+Cc: Peter Zijlstra <peterz@infradead.org>
+Cc: Thomas Gleixner <tglx@linutronix.de>
+Cc: linux-mm@kvack.org
+Link: http://lkml.kernel.org/r/6836ff90c45b71d38e5d4405aec56fa9e5d1d4b2.1477405374.git.jpoimboe@redhat.com
+Signed-off-by: Ingo Molnar <mingo@kernel.org>
+Cc: Kees Cook <keescook@google.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ mm/page_alloc.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/mm/page_alloc.c
++++ b/mm/page_alloc.c
+@@ -6445,8 +6445,8 @@ unsigned long free_reserved_area(void *s
+ }
+
+ if (pages && s)
+- pr_info("Freeing %s memory: %ldK (%p - %p)\n",
+- s, pages << (PAGE_SHIFT - 10), start, end);
++ pr_info("Freeing %s memory: %ldK\n",
++ s, pages << (PAGE_SHIFT - 10));
+
+ return pages;
+ }
+++ /dev/null
-From 73a47a9bb3e2c4a9c553c72456e63ab991b1a4d9 Mon Sep 17 00:00:00 2001
-From: David Woods <dwoods@mellanox.com>
-Date: Fri, 26 May 2017 17:53:21 -0400
-Subject: mmc: core: Use device_property_read instead of of_property_read
-
-From: David Woods <dwoods@mellanox.com>
-
-commit 73a47a9bb3e2c4a9c553c72456e63ab991b1a4d9 upstream.
-
-Using the device_property interfaces allows mmc drivers to work
-on platforms which run on either device tree or ACPI.
-
-Signed-off-by: David Woods <dwoods@mellanox.com>
-Reviewed-by: Chris Metcalf <cmetcalf@mellanox.com>
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
----
- drivers/mmc/core/host.c | 70 +++++++++++++++++++++++-------------------------
- 1 file changed, 34 insertions(+), 36 deletions(-)
-
---- a/drivers/mmc/core/host.c
-+++ b/drivers/mmc/core/host.c
-@@ -179,19 +179,17 @@ static void mmc_retune_timer(unsigned lo
- */
- int mmc_of_parse(struct mmc_host *host)
- {
-- struct device_node *np;
-+ struct device *dev = host->parent;
- u32 bus_width;
- int ret;
- bool cd_cap_invert, cd_gpio_invert = false;
- bool ro_cap_invert, ro_gpio_invert = false;
-
-- if (!host->parent || !host->parent->of_node)
-+ if (!dev || !dev_fwnode(dev))
- return 0;
-
-- np = host->parent->of_node;
--
- /* "bus-width" is translated to MMC_CAP_*_BIT_DATA flags */
-- if (of_property_read_u32(np, "bus-width", &bus_width) < 0) {
-+ if (device_property_read_u32(dev, "bus-width", &bus_width) < 0) {
- dev_dbg(host->parent,
- "\"bus-width\" property is missing, assuming 1 bit.\n");
- bus_width = 1;
-@@ -213,7 +211,7 @@ int mmc_of_parse(struct mmc_host *host)
- }
-
- /* f_max is obtained from the optional "max-frequency" property */
-- of_property_read_u32(np, "max-frequency", &host->f_max);
-+ device_property_read_u32(dev, "max-frequency", &host->f_max);
-
- /*
- * Configure CD and WP pins. They are both by default active low to
-@@ -228,12 +226,12 @@ int mmc_of_parse(struct mmc_host *host)
- */
-
- /* Parse Card Detection */
-- if (of_property_read_bool(np, "non-removable")) {
-+ if (device_property_read_bool(dev, "non-removable")) {
- host->caps |= MMC_CAP_NONREMOVABLE;
- } else {
-- cd_cap_invert = of_property_read_bool(np, "cd-inverted");
-+ cd_cap_invert = device_property_read_bool(dev, "cd-inverted");
-
-- if (of_property_read_bool(np, "broken-cd"))
-+ if (device_property_read_bool(dev, "broken-cd"))
- host->caps |= MMC_CAP_NEEDS_POLL;
-
- ret = mmc_gpiod_request_cd(host, "cd", 0, true,
-@@ -259,7 +257,7 @@ int mmc_of_parse(struct mmc_host *host)
- }
-
- /* Parse Write Protection */
-- ro_cap_invert = of_property_read_bool(np, "wp-inverted");
-+ ro_cap_invert = device_property_read_bool(dev, "wp-inverted");
-
- ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &ro_gpio_invert);
- if (!ret)
-@@ -267,62 +265,62 @@ int mmc_of_parse(struct mmc_host *host)
- else if (ret != -ENOENT && ret != -ENOSYS)
- return ret;
-
-- if (of_property_read_bool(np, "disable-wp"))
-+ if (device_property_read_bool(dev, "disable-wp"))
- host->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
-
- /* See the comment on CD inversion above */
- if (ro_cap_invert ^ ro_gpio_invert)
- host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
-
-- if (of_property_read_bool(np, "cap-sd-highspeed"))
-+ if (device_property_read_bool(dev, "cap-sd-highspeed"))
- host->caps |= MMC_CAP_SD_HIGHSPEED;
-- if (of_property_read_bool(np, "cap-mmc-highspeed"))
-+ if (device_property_read_bool(dev, "cap-mmc-highspeed"))
- host->caps |= MMC_CAP_MMC_HIGHSPEED;
-- if (of_property_read_bool(np, "sd-uhs-sdr12"))
-+ if (device_property_read_bool(dev, "sd-uhs-sdr12"))
- host->caps |= MMC_CAP_UHS_SDR12;
-- if (of_property_read_bool(np, "sd-uhs-sdr25"))
-+ if (device_property_read_bool(dev, "sd-uhs-sdr25"))
- host->caps |= MMC_CAP_UHS_SDR25;
-- if (of_property_read_bool(np, "sd-uhs-sdr50"))
-+ if (device_property_read_bool(dev, "sd-uhs-sdr50"))
- host->caps |= MMC_CAP_UHS_SDR50;
-- if (of_property_read_bool(np, "sd-uhs-sdr104"))
-+ if (device_property_read_bool(dev, "sd-uhs-sdr104"))
- host->caps |= MMC_CAP_UHS_SDR104;
-- if (of_property_read_bool(np, "sd-uhs-ddr50"))
-+ if (device_property_read_bool(dev, "sd-uhs-ddr50"))
- host->caps |= MMC_CAP_UHS_DDR50;
-- if (of_property_read_bool(np, "cap-power-off-card"))
-+ if (device_property_read_bool(dev, "cap-power-off-card"))
- host->caps |= MMC_CAP_POWER_OFF_CARD;
-- if (of_property_read_bool(np, "cap-mmc-hw-reset"))
-+ if (device_property_read_bool(dev, "cap-mmc-hw-reset"))
- host->caps |= MMC_CAP_HW_RESET;
-- if (of_property_read_bool(np, "cap-sdio-irq"))
-+ if (device_property_read_bool(np, "cap-sdio-irq"))
- host->caps |= MMC_CAP_SDIO_IRQ;
-- if (of_property_read_bool(np, "full-pwr-cycle"))
-+ if (device_property_read_bool(np, "full-pwr-cycle"))
- host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE;
-- if (of_property_read_bool(np, "keep-power-in-suspend"))
-+ if (device_property_read_bool(np, "keep-power-in-suspend"))
- host->pm_caps |= MMC_PM_KEEP_POWER;
-- if (of_property_read_bool(np, "wakeup-source") ||
-- of_property_read_bool(np, "enable-sdio-wakeup")) /* legacy */
-+ if (device_property_read_bool(np, "wakeup-source") ||
-+ device_property_read_bool(np, "enable-sdio-wakeup")) /* legacy */
- host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
-- if (of_property_read_bool(np, "mmc-ddr-1_8v"))
-+ if (device_property_read_bool(np, "mmc-ddr-1_8v"))
- host->caps |= MMC_CAP_1_8V_DDR;
-- if (of_property_read_bool(np, "mmc-ddr-1_2v"))
-+ if (device_property_read_bool(np, "mmc-ddr-1_2v"))
- host->caps |= MMC_CAP_1_2V_DDR;
-- if (of_property_read_bool(np, "mmc-hs200-1_8v"))
-+ if (device_property_read_bool(np, "mmc-hs200-1_8v"))
- host->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
-- if (of_property_read_bool(np, "mmc-hs200-1_2v"))
-+ if (device_property_read_bool(np, "mmc-hs200-1_2v"))
- host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
-- if (of_property_read_bool(np, "mmc-hs400-1_8v"))
-+ if (device_property_read_bool(np, "mmc-hs400-1_8v"))
- host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
-- if (of_property_read_bool(np, "mmc-hs400-1_2v"))
-+ if (device_property_read_bool(np, "mmc-hs400-1_2v"))
- host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
-- if (of_property_read_bool(np, "mmc-hs400-enhanced-strobe"))
-+ if (device_property_read_bool(np, "mmc-hs400-enhanced-strobe"))
- host->caps2 |= MMC_CAP2_HS400_ES;
-- if (of_property_read_bool(np, "no-sdio"))
-+ if (device_property_read_bool(np, "no-sdio"))
- host->caps2 |= MMC_CAP2_NO_SDIO;
-- if (of_property_read_bool(np, "no-sd"))
-+ if (device_property_read_bool(np, "no-sd"))
- host->caps2 |= MMC_CAP2_NO_SD;
-- if (of_property_read_bool(np, "no-mmc"))
-+ if (device_property_read_bool(np, "no-mmc"))
- host->caps2 |= MMC_CAP2_NO_MMC;
-
-- host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr);
-+ host->dsr_req = !device_property_read_u32(dev, "dsr", &host->dsr);
- if (host->dsr_req && (host->dsr & ~0xffff)) {
- dev_err(host->parent,
- "device tree specified broken value for DSR: 0x%x, ignoring\n",
+++ /dev/null
-From 852ff5fea9eb6a9799f1881d6df2cd69a9e6eed5 Mon Sep 17 00:00:00 2001
-From: David Woods <dwoods@mellanox.com>
-Date: Fri, 26 May 2017 17:53:20 -0400
-Subject: mmc: dw_mmc: Use device_property_read instead of of_property_read
-
-From: David Woods <dwoods@mellanox.com>
-
-commit 852ff5fea9eb6a9799f1881d6df2cd69a9e6eed5 upstream.
-
-Using the device_property interfaces allows the dw_mmc driver to work
-on platforms which run on either device tree or ACPI.
-
-Signed-off-by: David Woods <dwoods@mellanox.com>
-Reviewed-by: Chris Metcalf <cmetcalf@mellanox.com>
-Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
----
- drivers/mmc/host/dw_mmc.c | 19 +++++++++----------
- 1 file changed, 9 insertions(+), 10 deletions(-)
-
---- a/drivers/mmc/host/dw_mmc.c
-+++ b/drivers/mmc/host/dw_mmc.c
-@@ -2610,8 +2610,8 @@ static int dw_mci_init_slot(struct dw_mc
- host->slot[id] = slot;
-
- mmc->ops = &dw_mci_ops;
-- if (of_property_read_u32_array(host->dev->of_node,
-- "clock-freq-min-max", freq, 2)) {
-+ if (device_property_read_u32_array(host->dev, "clock-freq-min-max",
-+ freq, 2)) {
- mmc->f_min = DW_MCI_FREQ_MIN;
- mmc->f_max = DW_MCI_FREQ_MAX;
- } else {
-@@ -2709,7 +2709,6 @@ static void dw_mci_init_dma(struct dw_mc
- {
- int addr_config;
- struct device *dev = host->dev;
-- struct device_node *np = dev->of_node;
-
- /*
- * Check tansfer mode from HCON[17:16]
-@@ -2770,8 +2769,9 @@ static void dw_mci_init_dma(struct dw_mc
- dev_info(host->dev, "Using internal DMA controller.\n");
- } else {
- /* TRANS_MODE_EDMAC: check dma bindings again */
-- if ((of_property_count_strings(np, "dma-names") < 0) ||
-- (!of_find_property(np, "dmas", NULL))) {
-+ if ((device_property_read_string_array(dev, "dma-names",
-+ NULL, 0) < 0) ||
-+ !device_property_present(dev, "dmas")) {
- goto no_dma;
- }
- host->dma_ops = &dw_mci_edmac_ops;
-@@ -2931,7 +2931,6 @@ static struct dw_mci_board *dw_mci_parse
- {
- struct dw_mci_board *pdata;
- struct device *dev = host->dev;
-- struct device_node *np = dev->of_node;
- const struct dw_mci_drv_data *drv_data = host->drv_data;
- int ret;
- u32 clock_frequency;
-@@ -2948,15 +2947,15 @@ static struct dw_mci_board *dw_mci_parse
- }
-
- /* find out number of slots supported */
-- of_property_read_u32(np, "num-slots", &pdata->num_slots);
-+ device_property_read_u32(np, "num-slots", &pdata->num_slots);
-
-- if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
-+ if (device_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
- dev_info(dev,
- "fifo-depth property not found, using value of FIFOTH register as default\n");
-
-- of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
-+ device_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
-
-- if (!of_property_read_u32(np, "clock-frequency", &clock_frequency))
-+ if (!device_property_read_u32(np, "clock-frequency", &clock_frequency))
- pdata->bus_hz = clock_frequency;
-
- if (drv_data && drv_data->parse_dt) {