ASoC: cs35l35: Disable regulators on driver removal

The chips main power supplies VA and VP are enabled during probe but
then never disabled, this will cause warnings from the regulator
framework on driver removal. Fix this by adding a remove callback and
disabling the supplies, whilst doing so follow best practice and put the
chip back into reset as well.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/sound/soc/codecs/cs35l35.c b/sound/soc/codecs/cs35l35.c
index 9f4a59871cee72b2011acf20d8167e12933ec2fc..c71696146c5ec17e17751903a592038c4f8347e4 100644 (file)
--- a/sound/soc/codecs/cs35l35.c
+++ b/sound/soc/codecs/cs35l35.c
@@ -1635,6 +1635,16 @@ err:
        return ret;
 }
 
+static int cs35l35_i2c_remove(struct i2c_client *i2c_client)
+{
+       struct cs35l35_private *cs35l35 = i2c_get_clientdata(i2c_client);
+
+       regulator_bulk_disable(cs35l35->num_supplies, cs35l35->supplies);
+       gpiod_set_value_cansleep(cs35l35->reset_gpio, 0);
+
+       return 0;
+}
+
 static const struct of_device_id cs35l35_of_match[] = {
        {.compatible = "cirrus,cs35l35"},
        {},
@@ -1655,6 +1665,7 @@ static struct i2c_driver cs35l35_i2c_driver = {
        },
        .id_table = cs35l35_id,
        .probe = cs35l35_i2c_probe,
+       .remove = cs35l35_i2c_remove,
 };
 
 module_i2c_driver(cs35l35_i2c_driver);