]> git.ipfire.org Git - thirdparty/kernel/linux.git/commitdiff
ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 8.0 Wi-Fi
authorBryant Mairs <bryant@mai.rs>
Mon, 19 Feb 2024 21:43:17 +0000 (22:43 +0100)
committerBjorn Andersson <andersson@kernel.org>
Mon, 27 May 2024 17:03:15 +0000 (12:03 -0500)
Add support for this tablet based on the MSM8226 SoC, codenamed
"milletwifi".

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bryant Mairs <bryant@mai.rs>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240219214643.197116-3-bryant@mai.rs
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
arch/arm/boot/dts/qcom/Makefile
arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts [new file with mode: 0644]

index e2e922bdc9e97e695bd74ea321c45dcb227f1434..1149a310ad4341389681e27e5bb7bb80dd802680 100644 (file)
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
        qcom-apq8026-huawei-sturgeon.dtb \
        qcom-apq8026-lg-lenok.dtb \
        qcom-apq8026-samsung-matisse-wifi.dtb \
+       qcom-apq8026-samsung-milletwifi.dtb \
        qcom-apq8060-dragonboard.dtb \
        qcom-apq8064-cm-qs600.dtb \
        qcom-apq8064-ifc6410.dtb \
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
new file mode 100644 (file)
index 0000000..7d51915
--- /dev/null
@@ -0,0 +1,573 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
+ * Copyright (c) 2023, Bryant Mairs <bryant@mai.rs>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/power/summit,smb347-charger.h>
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &smem_region;
+
+/ {
+       model = "Samsung Galaxy Tab 4 8.0 Wi-Fi";
+       compatible = "samsung,milletwifi", "qcom,apq8026";
+       chassis-type = "tablet";
+
+       aliases {
+               display0 = &framebuffer0;
+               mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+               mmc1 = &sdhc_2; /* SDC2 SD card slot */
+       };
+
+       chosen {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               stdout-path = "display0";
+
+               framebuffer0: framebuffer@3200000 {
+                       compatible = "simple-framebuffer";
+                       reg = <0x03200000 0x800000>;
+                       width = <800>;
+                       height = <1280>;
+                       stride = <(800 * 3)>;
+                       format = "r8g8b8";
+               };
+       };
+
+       gpio-hall-sensor {
+               compatible = "gpio-keys";
+
+               event-hall-sensor {
+                       label = "Cover";
+                       gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+                       linux,input-type = <EV_SW>;
+                       linux,code = <SW_LID>;
+                       debounce-interval = <15>;
+                       linux,can-disable;
+                       wakeup-source;
+               };
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               autorepeat;
+
+               key-home {
+                       label = "Home";
+                       gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_HOMEPAGE>;
+                       debounce-interval = <15>;
+               };
+
+               key-volume-down {
+                       label = "Volume Down";
+                       gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_VOLUMEDOWN>;
+                       debounce-interval = <15>;
+               };
+
+               key-volume-up {
+                       label = "Volume Up";
+                       gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_VOLUMEUP>;
+                       debounce-interval = <15>;
+               };
+       };
+
+       i2c-backlight {
+               compatible = "i2c-gpio";
+               sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+               scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+               pinctrl-0 = <&backlight_i2c_default_state>;
+               pinctrl-names = "default";
+
+               i2c-gpio,delay-us = <4>;
+
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               backlight@2c {
+                       compatible = "ti,lp8556";
+                       reg = <0x2c>;
+                       enable-supply = <&reg_backlight_vddio>;
+
+                       dev-ctrl = /bits/ 8 <0x80>;
+                       init-brt = /bits/ 8 <0x3f>;
+
+                       /*
+                        * Change transition duration: 200ms, Change
+                        * transition strength: heavy, PWM hysteresis:
+                        * 1-bit w/ 8-bit resolution
+                        */
+                       rom-a3h {
+                               rom-addr = /bits/ 8 <0xa3>;
+                               rom-val = /bits/ 8 <0x5e>;
+                       };
+
+                       /*
+                        * PWM phase configuration: 3-phase/3 drivers
+                        * (0, 120deg, 240deg, -, -, -),
+                        * PWM frequency: 9616Hz (10-bit)
+                        */
+                       rom-a5h {
+                               rom-addr = /bits/ 8 <0xa5>;
+                               rom-val = /bits/ 8 <0x34>;
+                       };
+
+                       /*
+                        * Enable LED drivers 2 & 3, Boot inductor
+                        * current limit: 1.5A/2.6A
+                        */
+                       rom-a7h {
+                               rom-addr = /bits/ 8 <0xa7>;
+                               rom-val = /bits/ 8 <0xfa>;
+                       };
+               };
+       };
+
+       reg_backlight_vddio: regulator-backlight-vddio {
+               compatible = "regulator-fixed";
+               regulator-name = "backlight_vddio";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+
+               gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+
+               pinctrl-0 = <&backlight_vddio_default_state>;
+               pinctrl-names = "default";
+       };
+
+       reg_tsp_1p8v: regulator-tsp-1p8v {
+               compatible = "regulator-fixed";
+               regulator-name = "tsp_1p8v";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+
+               gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+
+               pinctrl-0 = <&tsp_en1_default_state>;
+               pinctrl-names = "default";
+       };
+
+       reg_tsp_3p3v: regulator-tsp-3p3v {
+               compatible = "regulator-fixed";
+               regulator-name = "tsp_3p3v";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+
+               pinctrl-0 = <&tsp_en_default_state>;
+               pinctrl-names = "default";
+       };
+
+       reserved-memory {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               framebuffer@3200000 {
+                       reg = <0x03200000 0x800000>;
+                       no-map;
+               };
+
+               mpss_region: mpss@8400000 {
+                       reg = <0x08400000 0x1f00000>;
+                       no-map;
+               };
+
+               mba_region: mba@a300000 {
+                       reg = <0x0a300000 0x100000>;
+                       no-map;
+               };
+
+               reserved@cb00000 {
+                       reg = <0x0cb00000 0x700000>;
+                       no-map;
+               };
+
+               wcnss_region: wcnss@d200000 {
+                       reg = <0x0d200000 0x700000>;
+                       no-map;
+               };
+
+               adsp_region: adsp@d900000 {
+                       reg = <0x0d900000 0x1800000>;
+                       no-map;
+               };
+
+               venus@f100000 {
+                       reg = <0x0f100000 0x500000>;
+                       no-map;
+               };
+
+               smem_region: smem@fa00000 {
+                       reg = <0x0fa00000 0x100000>;
+                       no-map;
+               };
+
+               reserved@fb00000 {
+                       reg = <0x0fb00000 0x260000>;
+                       no-map;
+               };
+
+               rfsa@fd60000 {
+                       reg = <0x0fd60000 0x20000>;
+                       no-map;
+               };
+
+               rmtfs@fd80000 {
+                       compatible = "qcom,rmtfs-mem";
+                       reg = <0x0fd80000 0x180000>;
+                       no-map;
+
+                       qcom,client-id = <1>;
+               };
+       };
+};
+
+&blsp1_i2c2 {
+       status = "okay";
+
+       accelerometer@1d {
+               compatible = "st,lis2hh12";
+               reg = <0x1d>;
+
+               interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
+
+               pinctrl-0 = <&accel_int_default_state>;
+               pinctrl-names = "default";
+
+               vdd-supply = <&pm8226_l19>;
+               vddio-supply = <&pm8226_lvs1>;
+
+               mount-matrix = "0", "1", "0",
+                              "-1", "0", "0",
+                              "0", "0", "1";
+
+               st,drdy-int-pin = <1>;
+       };
+};
+
+&blsp1_i2c3 {
+       status = "okay";
+
+       charger@6a {
+               compatible = "summit,smb358";
+               reg = <0x6a>;
+
+               interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>;
+
+               pinctrl-0 = <&charger_int_default_state>;
+               pinctrl-names = "default";
+
+               summit,enable-usb-charging;
+               summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
+               summit,fast-voltage-threshold-microvolt = <3000000>;
+               summit,chip-temperature-threshold-celsius = <130>;
+               summit,usb-current-limit-microamp = <1500000>;
+       };
+};
+
+&blsp1_i2c4 {
+       status = "okay";
+
+       muic: usb-switch@25 {
+               compatible = "siliconmitus,sm5502-muic";
+               reg = <0x25>;
+
+               interrupts-extended = <&tlmm 67 IRQ_TYPE_EDGE_FALLING>;
+
+               pinctrl-0 = <&muic_int_default_state>;
+               pinctrl-names = "default";
+       };
+};
+
+&blsp1_i2c5 {
+       status = "okay";
+
+       touchscreen@48 {
+               compatible = "melfas,mms252", "melfas,mms114";
+               reg = <0x48>;
+               interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+               touchscreen-size-x = <800>;
+               touchscreen-size-y = <1280>;
+               avdd-supply = <&reg_tsp_3p3v>;
+               vdd-supply = <&reg_tsp_1p8v>;
+               linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+
+               pinctrl-0 = <&tsp_int_rst_default_state>;
+               pinctrl-names = "default";
+       };
+};
+
+&rpm_requests {
+       regulators {
+               compatible = "qcom,rpm-pm8226-regulators";
+
+               pm8226_s3: s3 {
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1300000>;
+               };
+
+               pm8226_s4: s4 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               pm8226_s5: s5 {
+                       regulator-min-microvolt = <1150000>;
+                       regulator-max-microvolt = <1150000>;
+               };
+
+               pm8226_l1: l1 {
+                       regulator-min-microvolt = <1225000>;
+                       regulator-max-microvolt = <1225000>;
+               };
+
+               pm8226_l2: l2 {
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+               };
+
+               pm8226_l3: l3 {
+                       regulator-min-microvolt = <750000>;
+                       regulator-max-microvolt = <1337500>;
+                       regulator-always-on;
+               };
+
+               pm8226_l4: l4 {
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+               };
+
+               pm8226_l5: l5 {
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+               };
+
+               pm8226_l6: l6 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-always-on;
+               };
+
+               pm8226_l7: l7 {
+                       regulator-min-microvolt = <1850000>;
+                       regulator-max-microvolt = <1850000>;
+               };
+
+               pm8226_l8: l8 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-always-on;
+               };
+
+               pm8226_l9: l9 {
+                       regulator-min-microvolt = <2050000>;
+                       regulator-max-microvolt = <2050000>;
+               };
+
+               pm8226_l10: l10 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               pm8226_l12: l12 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               pm8226_l14: l14 {
+                       regulator-min-microvolt = <2750000>;
+                       regulator-max-microvolt = <2750000>;
+               };
+
+               pm8226_l15: l15 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <3300000>;
+               };
+
+               pm8226_l16: l16 {
+                       regulator-min-microvolt = <3000000>;
+                       regulator-max-microvolt = <3350000>;
+               };
+
+               pm8226_l17: l17 {
+                       regulator-min-microvolt = <2950000>;
+                       regulator-max-microvolt = <2950000>;
+
+                       regulator-system-load = <200000>;
+                       regulator-allow-set-load;
+                       regulator-always-on;
+               };
+
+               pm8226_l18: l18 {
+                       regulator-min-microvolt = <2950000>;
+                       regulator-max-microvolt = <2950000>;
+               };
+
+               pm8226_l19: l19 {
+                       regulator-min-microvolt = <2850000>;
+                       regulator-max-microvolt = <3000000>;
+               };
+
+               pm8226_l20: l20 {
+                       regulator-min-microvolt = <3075000>;
+                       regulator-max-microvolt = <3075000>;
+               };
+
+               pm8226_l21: l21 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <2950000>;
+               };
+
+               pm8226_l22: l22 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <3000000>;
+               };
+
+               pm8226_l23: l23 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <3300000>;
+               };
+
+               pm8226_l24: l24 {
+                       regulator-min-microvolt = <1300000>;
+                       regulator-max-microvolt = <1350000>;
+               };
+
+               pm8226_l25: l25 {
+                       regulator-min-microvolt = <1775000>;
+                       regulator-max-microvolt = <2125000>;
+               };
+
+               pm8226_l26: l26 {
+                       regulator-min-microvolt = <1225000>;
+                       regulator-max-microvolt = <1300000>;
+               };
+
+               pm8226_l27: l27 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               pm8226_l28: l28 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <2950000>;
+               };
+
+               pm8226_lvs1: lvs1 {};
+       };
+};
+
+&sdhc_1 {
+       vmmc-supply = <&pm8226_l17>;
+       vqmmc-supply = <&pm8226_l6>;
+
+       bus-width = <8>;
+       non-removable;
+
+       status = "okay";
+};
+
+&sdhc_2 {
+       vmmc-supply = <&pm8226_l18>;
+       vqmmc-supply = <&pm8226_l21>;
+
+       bus-width = <4>;
+       cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+       pinctrl-0 = <&sdhc2_default_state>, <&sdc2_cd_default_state>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&tlmm {
+       accel_int_default_state: accel-int-default-state {
+               pins = "gpio54";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       backlight_i2c_default_state: backlight-i2c-default-state {
+               pins = "gpio20", "gpio21";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       backlight_vddio_default_state: backlight-vddio-default-state {
+               pins = "gpio74";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       charger_int_default_state: charger-int-default-state {
+               pins = "gpio115";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       muic_int_default_state: muic-int-default-state {
+               pins = "gpio67";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       sdc2_cd_default_state: sdc2-cd-default-state {
+               pins = "gpio38";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       tsp_en_default_state: tsp-en-default-state {
+               pins = "gpio31";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       tsp_en1_default_state: tsp-en1-default-state {
+               pins = "gpio114";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       tsp_int_rst_default_state: tsp-int-rst-default-state {
+               pins = "gpio17";
+               function = "gpio";
+               drive-strength = <10>;
+               bias-pull-up;
+       };
+};
+
+&usb {
+       extcon = <&muic>, <&muic>;
+       status = "okay";
+};
+
+&usb_hs_phy {
+       extcon = <&muic>;
+       v1p8-supply = <&pm8226_l10>;
+       v3p3-supply = <&pm8226_l20>;
+};