#! /bin/sh
-# From configure.in Revision: 1.288.6.18
+# From configure.in Revision: 1.288.6.19
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13
fi
+echo $ac_n "checking whether gcc needs -fno-strict-aliasing""... $ac_c" 1>&6
+echo "configure:1666: checking whether gcc needs -fno-strict-aliasing" >&5
+cat > conftest.$ac_ext <<EOF
+#line 1668 "configure"
+#include "confdefs.h"
+
+#ifdef __GNUC__
+# if defined(__GNUC_MINOR__) && __GNUC__ >= 3 && (__GNUC_MINOR__ >= 3)
+# error -fno-strict-aliasing needed
+# endif
+#endif
+
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1679: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+
+ GCC_EXTRA_OPT=
+ echo "$ac_t""no" 1>&6
+
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+
+ GCC_EXTRA_OPT=-fno-strict-aliasing
+ echo "$ac_t""yes" 1>&6
+
+fi
+rm -f conftest*
+
# Optimizer/debugger flags
if test -z "$OPT"
# debug builds.
OPT="-g -Wall -Wstrict-prototypes"
else
- OPT="-g -O3 -Wall -Wstrict-prototypes"
+ OPT="-g -O3 $GCC_EXTRA_OPT -Wall -Wstrict-prototypes"
fi;;
*)
- OPT="-O3 -Wall -Wstrict-prototypes";;
+ OPT="-O3 $GCC_EXTRA_OPT -Wall -Wstrict-prototypes";;
esac
case $ac_sys_system in
SCO_SV*) OPT="$OPT -m486 -DSCO5";;
fi
echo $ac_n "checking whether $CC accepts -OPT:Olimit=0""... $ac_c" 1>&6
-echo "configure:1721: checking whether $CC accepts -OPT:Olimit=0" >&5
+echo "configure:1755: checking whether $CC accepts -OPT:Olimit=0" >&5
if eval "test \"`echo '$''{'ac_cv_opt_olimit_ok'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_opt_olimit_ok=no
else
cat > conftest.$ac_ext <<EOF
-#line 1731 "configure"
+#line 1765 "configure"
#include "confdefs.h"
int main() { return 0; }
EOF
-if { (eval echo configure:1735: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1769: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_opt_olimit_ok=yes
else
esac
else
echo $ac_n "checking whether $CC accepts -Olimit 1500""... $ac_c" 1>&6
-echo "configure:1758: checking whether $CC accepts -Olimit 1500" >&5
+echo "configure:1792: checking whether $CC accepts -Olimit 1500" >&5
if eval "test \"`echo '$''{'ac_cv_olimit_ok'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_olimit_ok=no
else
cat > conftest.$ac_ext <<EOF
-#line 1768 "configure"
+#line 1802 "configure"
#include "confdefs.h"
int main() { return 0; }
EOF
-if { (eval echo configure:1772: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1806: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_olimit_ok=yes
else
# So we have to see first whether pthreads are available without
# options before we can check whether -Kpthread improves anything.
echo $ac_n "checking whether pthreads are available without options""... $ac_c" 1>&6
-echo "configure:1799: checking whether pthreads are available without options" >&5
+echo "configure:1833: checking whether pthreads are available without options" >&5
if eval "test \"`echo '$''{'ac_cv_pthread_is_default'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_pthread_is_default=no
else
cat > conftest.$ac_ext <<EOF
-#line 1807 "configure"
+#line 1841 "configure"
#include "confdefs.h"
#include <pthread.h>
}
EOF
-if { (eval echo configure:1823: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1857: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_pthread_is_default=yes
else
# so we need to run a program to see whether it really made the
# function available.
echo $ac_n "checking whether $CC accepts -Kpthread""... $ac_c" 1>&6
-echo "configure:1851: checking whether $CC accepts -Kpthread" >&5
+echo "configure:1885: checking whether $CC accepts -Kpthread" >&5
if eval "test \"`echo '$''{'ac_cv_kpthread'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_kpthread=no
else
cat > conftest.$ac_ext <<EOF
-#line 1861 "configure"
+#line 1895 "configure"
#include "confdefs.h"
#include <pthread.h>
}
EOF
-if { (eval echo configure:1877: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1911: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_kpthread=yes
else
# checks for header files
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1898: checking for ANSI C header files" >&5
+echo "configure:1932: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1903 "configure"
+#line 1937 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1911: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1945: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1928 "configure"
+#line 1962 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1946 "configure"
+#line 1980 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 1967 "configure"
+#line 2001 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:1978: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2012: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2023: checking for $ac_hdr" >&5
+echo "configure:2057: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2028 "configure"
+#line 2062 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2033: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2067: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:2070: checking for $ac_hdr that defines DIR" >&5
+echo "configure:2104: checking for $ac_hdr that defines DIR" >&5
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2075 "configure"
+#line 2109 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:2083: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2117: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:2108: checking for opendir in -ldir" >&5
+echo "configure:2142: checking for opendir in -ldir" >&5
ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2116 "configure"
+#line 2150 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:2127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2161: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:2149: checking for opendir in -lx" >&5
+echo "configure:2183: checking for opendir in -lx" >&5
ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2157 "configure"
+#line 2191 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2202: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# checks for typedefs
was_it_defined=no
echo $ac_n "checking for clock_t in time.h""... $ac_c" 1>&6
-echo "configure:2194: checking for clock_t in time.h" >&5
+echo "configure:2228: checking for clock_t in time.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2196 "configure"
+#line 2230 "configure"
#include "confdefs.h"
#include <time.h>
EOF
# Type availability checks
echo $ac_n "checking for mode_t""... $ac_c" 1>&6
-echo "configure:2235: checking for mode_t" >&5
+echo "configure:2269: checking for mode_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2240 "configure"
+#line 2274 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2268: checking for off_t" >&5
+echo "configure:2302: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2273 "configure"
+#line 2307 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:2301: checking for pid_t" >&5
+echo "configure:2335: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2306 "configure"
+#line 2340 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:2334: checking return type of signal handlers" >&5
+echo "configure:2368: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2339 "configure"
+#line 2373 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
int i;
; return 0; }
EOF
-if { (eval echo configure:2356: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2390: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2375: checking for size_t" >&5
+echo "configure:2409: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2380 "configure"
+#line 2414 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:2408: checking for uid_t in sys/types.h" >&5
+echo "configure:2442: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2413 "configure"
+#line 2447 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
# Sizes of various common basic types
echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:2444: checking size of int" >&5
+echo "configure:2478: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_int=4
else
cat > conftest.$ac_ext <<EOF
-#line 2452 "configure"
+#line 2486 "configure"
#include "confdefs.h"
#include <stdio.h>
-int main()
+main()
{
FILE *f=fopen("conftestval", "w");
- if (!f) return(1);
+ if (!f) exit(1);
fprintf(f, "%d\n", sizeof(int));
- return(0);
+ exit(0);
}
EOF
-if { (eval echo configure:2463: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_int=`cat conftestval`
else
echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:2483: checking size of long" >&5
+echo "configure:2517: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long=4
else
cat > conftest.$ac_ext <<EOF
-#line 2491 "configure"
+#line 2525 "configure"
#include "confdefs.h"
#include <stdio.h>
-int main()
+main()
{
FILE *f=fopen("conftestval", "w");
- if (!f) return(1);
+ if (!f) exit(1);
fprintf(f, "%d\n", sizeof(long));
- return(0);
+ exit(0);
}
EOF
-if { (eval echo configure:2502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2536: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long=`cat conftestval`
else
echo $ac_n "checking size of void *""... $ac_c" 1>&6
-echo "configure:2522: checking size of void *" >&5
+echo "configure:2556: checking size of void *" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_void_p=4
else
cat > conftest.$ac_ext <<EOF
-#line 2530 "configure"
+#line 2564 "configure"
#include "confdefs.h"
#include <stdio.h>
-int main()
+main()
{
FILE *f=fopen("conftestval", "w");
- if (!f) return(1);
+ if (!f) exit(1);
fprintf(f, "%d\n", sizeof(void *));
- return(0);
+ exit(0);
}
EOF
-if { (eval echo configure:2541: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2575: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_void_p=`cat conftestval`
else
echo $ac_n "checking size of char""... $ac_c" 1>&6
-echo "configure:2561: checking size of char" >&5
+echo "configure:2595: checking size of char" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_char'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_char=1
else
cat > conftest.$ac_ext <<EOF
-#line 2569 "configure"
+#line 2603 "configure"
#include "confdefs.h"
#include <stdio.h>
-int main()
+main()
{
FILE *f=fopen("conftestval", "w");
- if (!f) return(1);
+ if (!f) exit(1);
fprintf(f, "%d\n", sizeof(char));
- return(0);
+ exit(0);
}
EOF
-if { (eval echo configure:2580: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2614: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_char=`cat conftestval`
else
echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:2600: checking size of short" >&5
+echo "configure:2634: checking size of short" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_short=2
else
cat > conftest.$ac_ext <<EOF
-#line 2608 "configure"
+#line 2642 "configure"
#include "confdefs.h"
#include <stdio.h>
-int main()
+main()
{
FILE *f=fopen("conftestval", "w");
- if (!f) return(1);
+ if (!f) exit(1);
fprintf(f, "%d\n", sizeof(short));
- return(0);
+ exit(0);
}
EOF
-if { (eval echo configure:2619: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_short=`cat conftestval`
else
echo $ac_n "checking size of float""... $ac_c" 1>&6
-echo "configure:2639: checking size of float" >&5
+echo "configure:2673: checking size of float" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_float'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_float=4
else
cat > conftest.$ac_ext <<EOF
-#line 2647 "configure"
+#line 2681 "configure"
#include "confdefs.h"
#include <stdio.h>
-int main()
+main()
{
FILE *f=fopen("conftestval", "w");
- if (!f) return(1);
+ if (!f) exit(1);
fprintf(f, "%d\n", sizeof(float));
- return(0);
+ exit(0);
}
EOF
-if { (eval echo configure:2658: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2692: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_float=`cat conftestval`
else
echo $ac_n "checking size of double""... $ac_c" 1>&6
-echo "configure:2678: checking size of double" >&5
+echo "configure:2712: checking size of double" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_double=8
else
cat > conftest.$ac_ext <<EOF
-#line 2686 "configure"
+#line 2720 "configure"
#include "confdefs.h"
#include <stdio.h>
-int main()
+main()
{
FILE *f=fopen("conftestval", "w");
- if (!f) return(1);
+ if (!f) exit(1);
fprintf(f, "%d\n", sizeof(double));
- return(0);
+ exit(0);
}
EOF
-if { (eval echo configure:2697: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2731: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_double=`cat conftestval`
else
echo $ac_n "checking size of fpos_t""... $ac_c" 1>&6
-echo "configure:2717: checking size of fpos_t" >&5
+echo "configure:2751: checking size of fpos_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_fpos_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_fpos_t=4
else
cat > conftest.$ac_ext <<EOF
-#line 2725 "configure"
+#line 2759 "configure"
#include "confdefs.h"
#include <stdio.h>
-int main()
+main()
{
FILE *f=fopen("conftestval", "w");
- if (!f) return(1);
+ if (!f) exit(1);
fprintf(f, "%d\n", sizeof(fpos_t));
- return(0);
+ exit(0);
}
EOF
-if { (eval echo configure:2736: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2770: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_fpos_t=`cat conftestval`
else
echo $ac_n "checking for long long support""... $ac_c" 1>&6
-echo "configure:2757: checking for long long support" >&5
+echo "configure:2791: checking for long long support" >&5
have_long_long=no
cat > conftest.$ac_ext <<EOF
-#line 2760 "configure"
+#line 2794 "configure"
#include "confdefs.h"
int main() {
long long x; x = (long long)0;
; return 0; }
EOF
-if { (eval echo configure:2767: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2801: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_LONG_LONG 1
echo "$ac_t""$have_long_long" 1>&6
if test "$have_long_long" = yes ; then
echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:2781: checking size of long long" >&5
+echo "configure:2815: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long_long=8
else
cat > conftest.$ac_ext <<EOF
-#line 2789 "configure"
+#line 2823 "configure"
#include "confdefs.h"
#include <stdio.h>
-int main()
+main()
{
FILE *f=fopen("conftestval", "w");
- if (!f) return(1);
+ if (!f) exit(1);
fprintf(f, "%d\n", sizeof(long long));
- return(0);
+ exit(0);
}
EOF
-if { (eval echo configure:2800: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2834: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_long=`cat conftestval`
else
fi
echo $ac_n "checking for uintptr_t support""... $ac_c" 1>&6
-echo "configure:2822: checking for uintptr_t support" >&5
+echo "configure:2856: checking for uintptr_t support" >&5
have_uintptr_t=no
cat > conftest.$ac_ext <<EOF
-#line 2825 "configure"
+#line 2859 "configure"
#include "confdefs.h"
int main() {
uintptr_t x; x = (uintptr_t)0;
; return 0; }
EOF
-if { (eval echo configure:2832: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2866: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_UINTPTR_T 1
echo "$ac_t""$have_uintptr_t" 1>&6
if test "$have_uintptr_t" = yes ; then
echo $ac_n "checking size of uintptr_t""... $ac_c" 1>&6
-echo "configure:2846: checking size of uintptr_t" >&5
+echo "configure:2880: checking size of uintptr_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_uintptr_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_uintptr_t=4
else
cat > conftest.$ac_ext <<EOF
-#line 2854 "configure"
+#line 2888 "configure"
#include "confdefs.h"
#include <stdio.h>
-int main()
+main()
{
FILE *f=fopen("conftestval", "w");
- if (!f) return(1);
+ if (!f) exit(1);
fprintf(f, "%d\n", sizeof(uintptr_t));
- return(0);
+ exit(0);
}
EOF
-if { (eval echo configure:2865: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2899: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_uintptr_t=`cat conftestval`
else
# Hmph. AC_CHECK_SIZEOF() doesn't include <sys/types.h>.
echo $ac_n "checking size of off_t""... $ac_c" 1>&6
-echo "configure:2888: checking size of off_t" >&5
+echo "configure:2922: checking size of off_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_off_t=4
else
cat > conftest.$ac_ext <<EOF
-#line 2896 "configure"
+#line 2930 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <sys/types.h>
exit(0);
}
EOF
-if { (eval echo configure:2908: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2942: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_off_t=`cat conftestval`
else
echo $ac_n "checking whether to enable large file support""... $ac_c" 1>&6
-echo "configure:2930: checking whether to enable large file support" >&5
+echo "configure:2964: checking whether to enable large file support" >&5
if test "$have_long_long" = yes -a \
"$ac_cv_sizeof_off_t" -gt "$ac_cv_sizeof_long" -a \
"$ac_cv_sizeof_long_long" -ge "$ac_cv_sizeof_off_t"; then
# AC_CHECK_SIZEOF() doesn't include <time.h>.
echo $ac_n "checking size of time_t""... $ac_c" 1>&6
-echo "configure:2945: checking size of time_t" >&5
+echo "configure:2979: checking size of time_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_time_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_time_t=4
else
cat > conftest.$ac_ext <<EOF
-#line 2953 "configure"
+#line 2987 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <time.h>
exit(0);
}
EOF
-if { (eval echo configure:2965: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2999: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_time_t=`cat conftestval`
else
then CC="$CC -Kpthread"
fi
echo $ac_n "checking for pthread_t""... $ac_c" 1>&6
-echo "configure:2993: checking for pthread_t" >&5
+echo "configure:3027: checking for pthread_t" >&5
have_pthread_t=no
cat > conftest.$ac_ext <<EOF
-#line 2996 "configure"
+#line 3030 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
pthread_t x; x = *(pthread_t*)0;
; return 0; }
EOF
-if { (eval echo configure:3003: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3037: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
have_pthread_t=yes
else
if test "$have_pthread_t" = yes ; then
# AC_CHECK_SIZEOF() doesn't include <pthread.h>.
echo $ac_n "checking size of pthread_t""... $ac_c" 1>&6
-echo "configure:3015: checking size of pthread_t" >&5
+echo "configure:3049: checking size of pthread_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_pthread_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_pthread_t=4
else
cat > conftest.$ac_ext <<EOF
-#line 3023 "configure"
+#line 3057 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <pthread.h>
exit(0);
}
EOF
-if { (eval echo configure:3035: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3069: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_pthread_t=`cat conftestval`
else
CC="$ac_save_cc"
echo $ac_n "checking for --enable-toolbox-glue""... $ac_c" 1>&6
-echo "configure:3059: checking for --enable-toolbox-glue" >&5
+echo "configure:3093: checking for --enable-toolbox-glue" >&5
# Check whether --enable-toolbox-glue or --disable-toolbox-glue was given.
if test "${enable_toolbox_glue+set}" = set; then
enableval="$enable_toolbox_glue"
esac
echo $ac_n "checking for --enable-framework""... $ac_c" 1>&6
-echo "configure:3111: checking for --enable-framework" >&5
+echo "configure:3145: checking for --enable-framework" >&5
if test "$enable_framework"
then
OPT="$OPT -fno-common -dynamic"
fi
echo $ac_n "checking for dyld""... $ac_c" 1>&6
-echo "configure:3134: checking for dyld" >&5
+echo "configure:3168: checking for dyld" >&5
case $ac_sys_system/$ac_sys_release in
Darwin/*)
cat >> confdefs.h <<\EOF
# SO is the extension of shared libraries `(including the dot!)
# -- usually .so, .sl on HP-UX, .dll on Cygwin
echo $ac_n "checking SO""... $ac_c" 1>&6
-echo "configure:3157: checking SO" >&5
+echo "configure:3191: checking SO" >&5
if test -z "$SO"
then
case $ac_sys_system in
# (Shared libraries in this instance are shared modules to be loaded into
# Python, as opposed to building Python itself as a shared library.)
echo $ac_n "checking LDSHARED""... $ac_c" 1>&6
-echo "configure:3172: checking LDSHARED" >&5
+echo "configure:3206: checking LDSHARED" >&5
if test -z "$LDSHARED"
then
case $ac_sys_system/$ac_sys_release in
# CCSHARED are the C *flags* used to create objects to go into a shared
# library (module) -- this is only needed for a few systems
echo $ac_n "checking CCSHARED""... $ac_c" 1>&6
-echo "configure:3241: checking CCSHARED" >&5
+echo "configure:3275: checking CCSHARED" >&5
if test -z "$CCSHARED"
then
case $ac_sys_system/$ac_sys_release in
# LINKFORSHARED are the flags passed to the $(CC) command that links
# the python executable -- this is only needed for a few systems
echo $ac_n "checking LINKFORSHARED""... $ac_c" 1>&6
-echo "configure:3277: checking LINKFORSHARED" >&5
+echo "configure:3311: checking LINKFORSHARED" >&5
if test -z "$LINKFORSHARED"
then
case $ac_sys_system/$ac_sys_release in
echo $ac_n "checking CFLAGSFORSHARED""... $ac_c" 1>&6
-echo "configure:3322: checking CFLAGSFORSHARED" >&5
+echo "configure:3356: checking CFLAGSFORSHARED" >&5
if test ! "$LIBRARY" = "$LDLIBRARY"
then
case $ac_sys_system in
# checks for libraries
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:3338: checking for dlopen in -ldl" >&5
+echo "configure:3372: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3346 "configure"
+#line 3380 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:3357: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3391: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
# Dynamic linking for SunOS/Solaris and SYSV
echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
-echo "configure:3385: checking for shl_load in -ldld" >&5
+echo "configure:3419: checking for shl_load in -ldld" >&5
ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldld $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3393 "configure"
+#line 3427 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
shl_load()
; return 0; }
EOF
-if { (eval echo configure:3404: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3438: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# checks for system dependent C++ extensions support
case "$ac_sys_system" in
AIX*) echo $ac_n "checking for genuine AIX C++ extensions support""... $ac_c" 1>&6
-echo "configure:3435: checking for genuine AIX C++ extensions support" >&5
+echo "configure:3469: checking for genuine AIX C++ extensions support" >&5
cat > conftest.$ac_ext <<EOF
-#line 3437 "configure"
+#line 3471 "configure"
#include "confdefs.h"
#include "/usr/lpp/xlC/include/load.h"
int main() {
loadAndInit("", 0, "")
; return 0; }
EOF
-if { (eval echo configure:3444: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3478: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define AIX_GENUINE_CPLUSPLUS 1
IRIX*) ;;
*)
echo $ac_n "checking for t_open in -lnsl""... $ac_c" 1>&6
-echo "configure:3468: checking for t_open in -lnsl" >&5
+echo "configure:3502: checking for t_open in -lnsl" >&5
ac_lib_var=`echo nsl'_'t_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3476 "configure"
+#line 3510 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
t_open()
; return 0; }
EOF
-if { (eval echo configure:3487: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3521: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
# SVR4
echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
-echo "configure:3508: checking for socket in -lsocket" >&5
+echo "configure:3542: checking for socket in -lsocket" >&5
ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3516 "configure"
+#line 3550 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
socket()
; return 0; }
EOF
-if { (eval echo configure:3527: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3561: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
case "$ac_sys_system" in
BeOS*)
echo $ac_n "checking for socket in -lnet""... $ac_c" 1>&6
-echo "configure:3552: checking for socket in -lnet" >&5
+echo "configure:3586: checking for socket in -lnet" >&5
ac_lib_var=`echo net'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnet $LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3560 "configure"
+#line 3594 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
socket()
; return 0; }
EOF
-if { (eval echo configure:3571: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3605: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
esac
echo $ac_n "checking for --with-libs""... $ac_c" 1>&6
-echo "configure:3595: checking for --with-libs" >&5
+echo "configure:3629: checking for --with-libs" >&5
# Check whether --with-libs or --without-libs was given.
if test "${with_libs+set}" = set; then
withval="$with_libs"
echo $ac_n "checking for --with-signal-module""... $ac_c" 1>&6
-echo "configure:3612: checking for --with-signal-module" >&5
+echo "configure:3646: checking for --with-signal-module" >&5
# Check whether --with-signal-module or --without-signal-module was given.
if test "${with_signal_module+set}" = set; then
withval="$with_signal_module"
USE_THREAD_MODULE=""
echo $ac_n "checking for --with-dec-threads""... $ac_c" 1>&6
-echo "configure:3638: checking for --with-dec-threads" >&5
+echo "configure:3672: checking for --with-dec-threads" >&5
# Check whether --with-dec-threads or --without-dec-threads was given.
if test "${with_dec_threads+set}" = set; then
echo $ac_n "checking for --with-threads""... $ac_c" 1>&6
-echo "configure:3655: checking for --with-threads" >&5
+echo "configure:3689: checking for --with-threads" >&5
# Check whether --with-threads or --without-threads was given.
if test "${with_threads+set}" = set; then
withval="$with_threads"
# According to the POSIX spec, a pthreads implementation must
# define _POSIX_THREADS in unistd.h. Some apparently don't (which ones?)
echo $ac_n "checking for _POSIX_THREADS in unistd.h""... $ac_c" 1>&6
-echo "configure:3713: checking for _POSIX_THREADS in unistd.h" >&5
+echo "configure:3747: checking for _POSIX_THREADS in unistd.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 3715 "configure"
+#line 3749 "configure"
#include "confdefs.h"
#include <unistd.h>
#ifdef _POSIX_THREADS
ac_safe=`echo "mach/cthreads.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for mach/cthreads.h""... $ac_c" 1>&6
-echo "configure:3741: checking for mach/cthreads.h" >&5
+echo "configure:3775: checking for mach/cthreads.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3746 "configure"
+#line 3780 "configure"
#include "confdefs.h"
#include <mach/cthreads.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3751: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3785: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""no" 1>&6
echo $ac_n "checking for --with-pth""... $ac_c" 1>&6
-echo "configure:3780: checking for --with-pth" >&5
+echo "configure:3814: checking for --with-pth" >&5
# Check whether --with-pth or --without-pth was given.
if test "${with_pth+set}" = set; then
withval="$with_pth"
_libs=$LIBS
LIBS="$LIBS -lpthread"
echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:3806: checking for pthread_create in -lpthread" >&5
+echo "configure:3840: checking for pthread_create in -lpthread" >&5
cat > conftest.$ac_ext <<EOF
-#line 3808 "configure"
+#line 3842 "configure"
#include "confdefs.h"
#include <pthread.h>
pthread_create (NULL, NULL, start_routine, NULL)
; return 0; }
EOF
-if { (eval echo configure:3818: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3852: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
LIBS=$_libs
echo $ac_n "checking for pthread_detach""... $ac_c" 1>&6
-echo "configure:3835: checking for pthread_detach" >&5
+echo "configure:3869: checking for pthread_detach" >&5
if eval "test \"`echo '$''{'ac_cv_func_pthread_detach'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3840 "configure"
+#line 3874 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char pthread_detach(); below. */
; return 0; }
EOF
-if { (eval echo configure:3863: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3897: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_pthread_detach=yes"
else
ac_safe=`echo "kernel/OS.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for kernel/OS.h""... $ac_c" 1>&6
-echo "configure:3888: checking for kernel/OS.h" >&5
+echo "configure:3922: checking for kernel/OS.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3893 "configure"
+#line 3927 "configure"
#include "confdefs.h"
#include <kernel/OS.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3898: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3932: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lpthreads""... $ac_c" 1>&6
-echo "configure:3927: checking for pthread_create in -lpthreads" >&5
+echo "configure:3961: checking for pthread_create in -lpthreads" >&5
ac_lib_var=`echo pthreads'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpthreads $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3935 "configure"
+#line 3969 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:3946: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3980: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
-echo "configure:3972: checking for pthread_create in -lc_r" >&5
+echo "configure:4006: checking for pthread_create in -lc_r" >&5
ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lc_r $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3980 "configure"
+#line 4014 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:3991: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4025: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for __d6_pthread_create in -lthread""... $ac_c" 1>&6
-echo "configure:4017: checking for __d6_pthread_create in -lthread" >&5
+echo "configure:4051: checking for __d6_pthread_create in -lthread" >&5
ac_lib_var=`echo thread'_'__d6_pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4025 "configure"
+#line 4059 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
__d6_pthread_create()
; return 0; }
EOF
-if { (eval echo configure:4036: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4070: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for __pthread_create_system in -lpthread""... $ac_c" 1>&6
-echo "configure:4062: checking for __pthread_create_system in -lpthread" >&5
+echo "configure:4096: checking for __pthread_create_system in -lpthread" >&5
ac_lib_var=`echo pthread'_'__pthread_create_system | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4070 "configure"
+#line 4104 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
__pthread_create_system()
; return 0; }
EOF
-if { (eval echo configure:4081: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4115: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lcma""... $ac_c" 1>&6
-echo "configure:4107: checking for pthread_create in -lcma" >&5
+echo "configure:4141: checking for pthread_create in -lcma" >&5
ac_lib_var=`echo cma'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcma $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4115 "configure"
+#line 4149 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:4126: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking if PTHREAD_SCOPE_SYSTEM is supported""... $ac_c" 1>&6
-echo "configure:4183: checking if PTHREAD_SCOPE_SYSTEM is supported" >&5
+echo "configure:4217: checking if PTHREAD_SCOPE_SYSTEM is supported" >&5
if eval "test \"`echo '$''{'ac_cv_pthread_system_supported'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_pthread_system_supported=no
else
cat > conftest.$ac_ext <<EOF
-#line 4191 "configure"
+#line 4225 "configure"
#include "confdefs.h"
#include <pthread.h>
void *foo(void *parm) {
exit(0);
}
EOF
-if { (eval echo configure:4206: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4240: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_pthread_system_supported=yes
else
for ac_func in pthread_sigmask
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4231: checking for $ac_func" >&5
+echo "configure:4265: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4236 "configure"
+#line 4270 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4259: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4293: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking for usconfig in -lmpc""... $ac_c" 1>&6
-echo "configure:4286: checking for usconfig in -lmpc" >&5
+echo "configure:4320: checking for usconfig in -lmpc" >&5
ac_lib_var=`echo mpc'_'usconfig | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lmpc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4294 "configure"
+#line 4328 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
usconfig()
; return 0; }
EOF
-if { (eval echo configure:4305: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4339: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for thr_create in -lthread""... $ac_c" 1>&6
-echo "configure:4332: checking for thr_create in -lthread" >&5
+echo "configure:4366: checking for thr_create in -lthread" >&5
ac_lib_var=`echo thread'_'thr_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4340 "configure"
+#line 4374 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
thr_create()
; return 0; }
EOF
-if { (eval echo configure:4351: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4385: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# Check for enable-ipv6
echo $ac_n "checking if --enable-ipv6 is specified""... $ac_c" 1>&6
-echo "configure:4400: checking if --enable-ipv6 is specified" >&5
+echo "configure:4434: checking if --enable-ipv6 is specified" >&5
# Check whether --enable-ipv6 or --disable-ipv6 was given.
if test "${enable_ipv6+set}" = set; then
enableval="$enable_ipv6"
else
cat > conftest.$ac_ext <<EOF
-#line 4425 "configure"
+#line 4459 "configure"
#include "confdefs.h"
/* AF_INET6 available check */
#include <sys/types.h>
}
EOF
-if { (eval echo configure:4439: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4473: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
echo "$ac_t""yes" 1>&6
ipv6=yes
if test "$ipv6" = "yes"; then
echo $ac_n "checking if RFC2553 API is available""... $ac_c" 1>&6
-echo "configure:4456: checking if RFC2553 API is available" >&5
+echo "configure:4490: checking if RFC2553 API is available" >&5
cat > conftest.$ac_ext <<EOF
-#line 4458 "configure"
+#line 4492 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <netinet/in.h>
x.sin6_scope_id;
; return 0; }
EOF
-if { (eval echo configure:4467: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4501: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
ipv6=yes
if test "$ipv6" = "yes"; then
echo $ac_n "checking ipv6 stack type""... $ac_c" 1>&6
-echo "configure:4497: checking ipv6 stack type" >&5
+echo "configure:4531: checking ipv6 stack type" >&5
for i in inria kame linux-glibc linux-inet6 solaris toshiba v6d zeta;
do
case $i in
inria)
cat > conftest.$ac_ext <<EOF
-#line 4503 "configure"
+#line 4537 "configure"
#include "confdefs.h"
#include <netinet/in.h>
;;
kame)
cat > conftest.$ac_ext <<EOF
-#line 4521 "configure"
+#line 4555 "configure"
#include "confdefs.h"
#include <netinet/in.h>
;;
linux-glibc)
cat > conftest.$ac_ext <<EOF
-#line 4542 "configure"
+#line 4576 "configure"
#include "confdefs.h"
#include <features.h>
;;
toshiba)
cat > conftest.$ac_ext <<EOF
-#line 4577 "configure"
+#line 4611 "configure"
#include "confdefs.h"
#include <sys/param.h>
;;
v6d)
cat > conftest.$ac_ext <<EOF
-#line 4597 "configure"
+#line 4631 "configure"
#include "confdefs.h"
#include </usr/local/v6/include/sys/v6config.h>
;;
zeta)
cat > conftest.$ac_ext <<EOF
-#line 4618 "configure"
+#line 4652 "configure"
#include "confdefs.h"
#include <sys/param.h>
# Check for GC support
echo $ac_n "checking for --with-cycle-gc""... $ac_c" 1>&6
-echo "configure:4662: checking for --with-cycle-gc" >&5
+echo "configure:4696: checking for --with-cycle-gc" >&5
# Check whether --with-cycle-gc or --without-cycle-gc was given.
if test "${with_cycle_gc+set}" = set; then
withval="$with_cycle_gc"
# Check for Python-specific malloc support
echo $ac_n "checking for --with-pymalloc""... $ac_c" 1>&6
-echo "configure:4684: checking for --with-pymalloc" >&5
+echo "configure:4718: checking for --with-pymalloc" >&5
# Check whether --with-pymalloc or --without-pymalloc was given.
if test "${with_pymalloc+set}" = set; then
withval="$with_pymalloc"
# Check for --with-wctype-functions
echo $ac_n "checking for --with-wctype-functions""... $ac_c" 1>&6
-echo "configure:4703: checking for --with-wctype-functions" >&5
+echo "configure:4737: checking for --with-wctype-functions" >&5
# Check whether --with-wctype-functions or --without-wctype-functions was given.
if test "${with_wctype_functions+set}" = set; then
withval="$with_wctype_functions"
DLINCLDIR=.
echo $ac_n "checking for --with-sgi-dl""... $ac_c" 1>&6
-echo "configure:4725: checking for --with-sgi-dl" >&5
+echo "configure:4759: checking for --with-sgi-dl" >&5
# Check whether --with-sgi-dl or --without-sgi-dl was given.
if test "${with_sgi_dl+set}" = set; then
withval="$with_sgi_dl"
echo $ac_n "checking for --with-dl-dld""... $ac_c" 1>&6
-echo "configure:4749: checking for --with-dl-dld" >&5
+echo "configure:4783: checking for --with-dl-dld" >&5
# Check whether --with-dl-dld or --without-dl-dld was given.
if test "${with_dl_dld+set}" = set; then
withval="$with_dl_dld"
for ac_func in dlopen
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4778: checking for $ac_func" >&5
+echo "configure:4812: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4783 "configure"
+#line 4817 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4806: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4840: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# loading of modules.
echo $ac_n "checking DYNLOADFILE""... $ac_c" 1>&6
-echo "configure:4835: checking DYNLOADFILE" >&5
+echo "configure:4869: checking DYNLOADFILE" >&5
if test -z "$DYNLOADFILE"
then
case $ac_sys_system/$ac_sys_release in
echo $ac_n "checking MACHDEP_OBJS""... $ac_c" 1>&6
-echo "configure:4866: checking MACHDEP_OBJS" >&5
+echo "configure:4900: checking MACHDEP_OBJS" >&5
if test -z "$MACHDEP_OBJS"
then
MACHDEP_OBJS=$extra_machdep_objs
truncate uname unsetenv waitpid _getpty getpriority
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4889: checking for $ac_func" >&5
+echo "configure:4923: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4894 "configure"
+#line 4928 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4917: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4951: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in openpty
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4947: checking for $ac_func" >&5
+echo "configure:4981: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4952 "configure"
+#line 4986 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5009: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for openpty in -lutil""... $ac_c" 1>&6
-echo "configure:4997: checking for openpty in -lutil" >&5
+echo "configure:5031: checking for openpty in -lutil" >&5
ac_lib_var=`echo util'_'openpty | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lutil $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5005 "configure"
+#line 5039 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
openpty()
; return 0; }
EOF
-if { (eval echo configure:5016: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5050: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in forkpty
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5045: checking for $ac_func" >&5
+echo "configure:5079: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5050 "configure"
+#line 5084 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5073: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5107: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for forkpty in -lutil""... $ac_c" 1>&6
-echo "configure:5095: checking for forkpty in -lutil" >&5
+echo "configure:5129: checking for forkpty in -lutil" >&5
ac_lib_var=`echo util'_'forkpty | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lutil $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5103 "configure"
+#line 5137 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
forkpty()
; return 0; }
EOF
-if { (eval echo configure:5114: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5148: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in fseek64 fseeko fstatvfs ftell64 ftello statvfs
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5145: checking for $ac_func" >&5
+echo "configure:5179: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5150 "configure"
+#line 5184 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5173: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5207: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in dup2 getcwd strdup strerror memmove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5201: checking for $ac_func" >&5
+echo "configure:5235: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5206 "configure"
+#line 5240 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5229: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5263: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in getpgrp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5258: checking for $ac_func" >&5
+echo "configure:5292: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5263 "configure"
+#line 5297 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
#define $ac_tr_func 1
EOF
cat > conftest.$ac_ext <<EOF
-#line 5305 "configure"
+#line 5339 "configure"
#include "confdefs.h"
#include <unistd.h>
int main() {
getpgrp(0);
; return 0; }
EOF
-if { (eval echo configure:5312: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5346: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define GETPGRP_HAVE_ARG 1
for ac_func in setpgrp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5331: checking for $ac_func" >&5
+echo "configure:5365: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5336 "configure"
+#line 5370 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5359: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5393: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
#define $ac_tr_func 1
EOF
cat > conftest.$ac_ext <<EOF
-#line 5378 "configure"
+#line 5412 "configure"
#include "confdefs.h"
#include <unistd.h>
int main() {
setpgrp(0,0);
; return 0; }
EOF
-if { (eval echo configure:5385: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5419: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define SETPGRP_HAVE_ARG 1
for ac_func in gettimeofday
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5404: checking for $ac_func" >&5
+echo "configure:5438: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5409 "configure"
+#line 5443 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5432: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
#define $ac_tr_func 1
EOF
cat > conftest.$ac_ext <<EOF
-#line 5451 "configure"
+#line 5485 "configure"
#include "confdefs.h"
#include <sys/time.h>
int main() {
gettimeofday((struct timeval*)0,(struct timezone*)0);
; return 0; }
EOF
-if { (eval echo configure:5458: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5492: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
# On OSF/1 V5.1, getaddrinfo is available, but a define
# for [no]getaddrinfo in netdb.h.
echo $ac_n "checking for getaddrinfo""... $ac_c" 1>&6
-echo "configure:5480: checking for getaddrinfo" >&5
+echo "configure:5514: checking for getaddrinfo" >&5
cat > conftest.$ac_ext <<EOF
-#line 5482 "configure"
+#line 5516 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:5496: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5530: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
echo $ac_n "checking getaddrinfo bug""... $ac_c" 1>&6
-echo "configure:5501: checking getaddrinfo bug" >&5
+echo "configure:5535: checking getaddrinfo bug" >&5
if test "$cross_compiling" = yes; then
echo "$ac_t""buggy" 1>&6
buggygetaddrinfo=yes
else
cat > conftest.$ac_ext <<EOF
-#line 5507 "configure"
+#line 5541 "configure"
#include "confdefs.h"
#include <sys/types.h>
}
EOF
-if { (eval echo configure:5596: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5630: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
echo "$ac_t""good" 1>&6
buggygetaddrinfo=no
for ac_func in getnameinfo
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5636: checking for $ac_func" >&5
+echo "configure:5670: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5641 "configure"
+#line 5675 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5664: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5698: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# checks for structures
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:5691: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:5725: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5696 "configure"
+#line 5730 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:5705: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5739: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
-echo "configure:5726: checking whether struct tm is in sys/time.h or time.h" >&5
+echo "configure:5760: checking whether struct tm is in sys/time.h or time.h" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5731 "configure"
+#line 5765 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <time.h>
struct tm *tp; tp->tm_sec;
; return 0; }
EOF
-if { (eval echo configure:5739: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5773: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm=time.h
else
fi
echo $ac_n "checking for tm_zone in struct tm""... $ac_c" 1>&6
-echo "configure:5760: checking for tm_zone in struct tm" >&5
+echo "configure:5794: checking for tm_zone in struct tm" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm_zone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5765 "configure"
+#line 5799 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_cv_struct_tm>
struct tm tm; tm.tm_zone;
; return 0; }
EOF
-if { (eval echo configure:5773: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5807: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm_zone=yes
else
else
echo $ac_n "checking for tzname""... $ac_c" 1>&6
-echo "configure:5793: checking for tzname" >&5
+echo "configure:5827: checking for tzname" >&5
if eval "test \"`echo '$''{'ac_cv_var_tzname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5798 "configure"
+#line 5832 "configure"
#include "confdefs.h"
#include <time.h>
#ifndef tzname /* For SGI. */
atoi(*tzname);
; return 0; }
EOF
-if { (eval echo configure:5808: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5842: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_var_tzname=yes
else
fi
echo $ac_n "checking for st_rdev in struct stat""... $ac_c" 1>&6
-echo "configure:5830: checking for st_rdev in struct stat" >&5
+echo "configure:5864: checking for st_rdev in struct stat" >&5
if eval "test \"`echo '$''{'ac_cv_struct_st_rdev'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5835 "configure"
+#line 5869 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
struct stat s; s.st_rdev;
; return 0; }
EOF
-if { (eval echo configure:5843: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5877: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_st_rdev=yes
else
fi
echo $ac_n "checking for st_blksize in struct stat""... $ac_c" 1>&6
-echo "configure:5864: checking for st_blksize in struct stat" >&5
+echo "configure:5898: checking for st_blksize in struct stat" >&5
if eval "test \"`echo '$''{'ac_cv_struct_st_blksize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5869 "configure"
+#line 5903 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
struct stat s; s.st_blksize;
; return 0; }
EOF
-if { (eval echo configure:5877: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5911: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_st_blksize=yes
else
fi
echo $ac_n "checking for st_blocks in struct stat""... $ac_c" 1>&6
-echo "configure:5898: checking for st_blocks in struct stat" >&5
+echo "configure:5932: checking for st_blocks in struct stat" >&5
if eval "test \"`echo '$''{'ac_cv_struct_st_blocks'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5903 "configure"
+#line 5937 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
struct stat s; s.st_blocks;
; return 0; }
EOF
-if { (eval echo configure:5911: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5945: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_st_blocks=yes
else
echo $ac_n "checking for time.h that defines altzone""... $ac_c" 1>&6
-echo "configure:5935: checking for time.h that defines altzone" >&5
+echo "configure:5969: checking for time.h that defines altzone" >&5
if eval "test \"`echo '$''{'ac_cv_header_time_altzone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5940 "configure"
+#line 5974 "configure"
#include "confdefs.h"
#include <time.h>
int main() {
return altzone;
; return 0; }
EOF
-if { (eval echo configure:5947: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5981: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time_altzone=yes
else
was_it_defined=no
echo $ac_n "checking whether sys/select.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:5969: checking whether sys/select.h and sys/time.h may both be included" >&5
+echo "configure:6003: checking whether sys/select.h and sys/time.h may both be included" >&5
cat > conftest.$ac_ext <<EOF
-#line 5971 "configure"
+#line 6005 "configure"
#include "confdefs.h"
#include <sys/types.h>
;
; return 0; }
EOF
-if { (eval echo configure:5982: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6016: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define SYS_SELECT_WITH_SYS_TIME 1
echo "$ac_t""$was_it_defined" 1>&6
echo $ac_n "checking for addrinfo""... $ac_c" 1>&6
-echo "configure:5996: checking for addrinfo" >&5
+echo "configure:6030: checking for addrinfo" >&5
if eval "test \"`echo '$''{'ac_cv_struct_addrinfo'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6001 "configure"
+#line 6035 "configure"
#include "confdefs.h"
# include <netdb.h>
struct addrinfo a
; return 0; }
EOF
-if { (eval echo configure:6009: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6043: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_addrinfo=yes
else
fi
echo $ac_n "checking for sockaddr_storage""... $ac_c" 1>&6
-echo "configure:6030: checking for sockaddr_storage" >&5
+echo "configure:6064: checking for sockaddr_storage" >&5
if eval "test \"`echo '$''{'ac_cv_struct_sockaddr_storage'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6035 "configure"
+#line 6069 "configure"
#include "confdefs.h"
# include <sys/types.h>
struct sockaddr_storage s
; return 0; }
EOF
-if { (eval echo configure:6044: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6078: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_sockaddr_storage=yes
else
# checks for compiler characteristics
echo $ac_n "checking whether char is unsigned""... $ac_c" 1>&6
-echo "configure:6067: checking whether char is unsigned" >&5
+echo "configure:6101: checking whether char is unsigned" >&5
if eval "test \"`echo '$''{'ac_cv_c_char_unsigned'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$GCC" = yes; then
# GCC predefines this symbol on systems where it applies.
cat > conftest.$ac_ext <<EOF
-#line 6074 "configure"
+#line 6108 "configure"
#include "confdefs.h"
#ifdef __CHAR_UNSIGNED__
yes
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 6096 "configure"
+#line 6130 "configure"
#include "confdefs.h"
/* volatile prevents gcc2 from optimizing the test away on sparcs. */
#if !defined(__STDC__) || __STDC__ != 1
volatile char c = 255; exit(c < 0);
}
EOF
-if { (eval echo configure:6106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6140: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_char_unsigned=yes
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:6130: checking for working const" >&5
+echo "configure:6164: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6135 "configure"
+#line 6169 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:6184: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6218: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
works=no
echo $ac_n "checking for working volatile""... $ac_c" 1>&6
-echo "configure:6207: checking for working volatile" >&5
+echo "configure:6241: checking for working volatile" >&5
cat > conftest.$ac_ext <<EOF
-#line 6209 "configure"
+#line 6243 "configure"
#include "confdefs.h"
int main() {
volatile int x; x = 0;
; return 0; }
EOF
-if { (eval echo configure:6216: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6250: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
works=yes
else
works=no
echo $ac_n "checking for working signed char""... $ac_c" 1>&6
-echo "configure:6233: checking for working signed char" >&5
+echo "configure:6267: checking for working signed char" >&5
cat > conftest.$ac_ext <<EOF
-#line 6235 "configure"
+#line 6269 "configure"
#include "confdefs.h"
int main() {
signed char c;
; return 0; }
EOF
-if { (eval echo configure:6242: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6276: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
works=yes
else
have_prototypes=no
echo $ac_n "checking for prototypes""... $ac_c" 1>&6
-echo "configure:6259: checking for prototypes" >&5
+echo "configure:6293: checking for prototypes" >&5
cat > conftest.$ac_ext <<EOF
-#line 6261 "configure"
+#line 6295 "configure"
#include "confdefs.h"
int foo(int x) { return 0; }
int main() {
return foo(10);
; return 0; }
EOF
-if { (eval echo configure:6268: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6302: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_PROTOTYPES 1
works=no
echo $ac_n "checking for variable length prototypes and stdarg.h""... $ac_c" 1>&6
-echo "configure:6283: checking for variable length prototypes and stdarg.h" >&5
+echo "configure:6317: checking for variable length prototypes and stdarg.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 6285 "configure"
+#line 6319 "configure"
#include "confdefs.h"
#include <stdarg.h>
return foo(10, "", 3.14);
; return 0; }
EOF
-if { (eval echo configure:6302: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6336: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_STDARG_PROTOTYPES 1
if test "$have_prototypes" = yes; then
bad_prototypes=no
echo $ac_n "checking for bad exec* prototypes""... $ac_c" 1>&6
-echo "configure:6318: checking for bad exec* prototypes" >&5
+echo "configure:6352: checking for bad exec* prototypes" >&5
cat > conftest.$ac_ext <<EOF
-#line 6320 "configure"
+#line 6354 "configure"
#include "confdefs.h"
#include <unistd.h>
int main() {
char **t;execve("@",t,t);
; return 0; }
EOF
-if { (eval echo configure:6327: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6361: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
# check if sockaddr has sa_len member
echo $ac_n "checking if sockaddr has sa_len member""... $ac_c" 1>&6
-echo "configure:6344: checking if sockaddr has sa_len member" >&5
+echo "configure:6378: checking if sockaddr has sa_len member" >&5
cat > conftest.$ac_ext <<EOF
-#line 6346 "configure"
+#line 6380 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/socket.h>
x.sa_len = 0;
; return 0; }
EOF
-if { (eval echo configure:6355: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6389: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
rm -f conftest*
echo $ac_n "checking for bad static forward""... $ac_c" 1>&6
-echo "configure:6371: checking for bad static forward" >&5
+echo "configure:6405: checking for bad static forward" >&5
if eval "test \"`echo '$''{'ac_cv_bad_static_forward'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_bad_static_forward=no
else
cat > conftest.$ac_ext <<EOF
-#line 6379 "configure"
+#line 6413 "configure"
#include "confdefs.h"
struct s { int a; int b; };
exit(!((int)&foo == foobar()));
}
EOF
-if { (eval echo configure:6394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6428: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_bad_static_forward=no
else
va_list_is_array=no
echo $ac_n "checking whether va_list is an array""... $ac_c" 1>&6
-echo "configure:6419: checking whether va_list is an array" >&5
+echo "configure:6453: checking whether va_list is an array" >&5
cat > conftest.$ac_ext <<EOF
-#line 6421 "configure"
+#line 6455 "configure"
#include "confdefs.h"
#ifdef HAVE_STDARG_PROTOTYPES
va_list list1, list2; list1 = list2;
; return 0; }
EOF
-if { (eval echo configure:6434: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6468: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
# sigh -- gethostbyname_r is a mess; it can have 3, 5 or 6 arguments :-(
echo $ac_n "checking for gethostbyname_r""... $ac_c" 1>&6
-echo "configure:6450: checking for gethostbyname_r" >&5
+echo "configure:6484: checking for gethostbyname_r" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname_r'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6455 "configure"
+#line 6489 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname_r(); below. */
; return 0; }
EOF
-if { (eval echo configure:6478: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6512: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname_r=yes"
else
EOF
echo $ac_n "checking gethostbyname_r with 6 args""... $ac_c" 1>&6
-echo "configure:6498: checking gethostbyname_r with 6 args" >&5
+echo "configure:6532: checking gethostbyname_r with 6 args" >&5
OLD_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS $MY_CPPFLAGS $MY_THREAD_CPPFLAGS $MY_CFLAGS"
cat > conftest.$ac_ext <<EOF
-#line 6502 "configure"
+#line 6536 "configure"
#include "confdefs.h"
# include <netdb.h>
; return 0; }
EOF
-if { (eval echo configure:6519: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6553: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
echo "$ac_t""no" 1>&6
echo $ac_n "checking gethostbyname_r with 5 args""... $ac_c" 1>&6
-echo "configure:6539: checking gethostbyname_r with 5 args" >&5
+echo "configure:6573: checking gethostbyname_r with 5 args" >&5
cat > conftest.$ac_ext <<EOF
-#line 6541 "configure"
+#line 6575 "configure"
#include "confdefs.h"
# include <netdb.h>
; return 0; }
EOF
-if { (eval echo configure:6558: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6592: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
echo "$ac_t""no" 1>&6
echo $ac_n "checking gethostbyname_r with 3 args""... $ac_c" 1>&6
-echo "configure:6578: checking gethostbyname_r with 3 args" >&5
+echo "configure:6612: checking gethostbyname_r with 3 args" >&5
cat > conftest.$ac_ext <<EOF
-#line 6580 "configure"
+#line 6614 "configure"
#include "confdefs.h"
# include <netdb.h>
; return 0; }
EOF
-if { (eval echo configure:6595: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6629: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
for ac_func in gethostbyname
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6631: checking for $ac_func" >&5
+echo "configure:6665: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6636 "configure"
+#line 6670 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6659: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6693: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Linux requires this for correct f.p. operations
echo $ac_n "checking for __fpu_control""... $ac_c" 1>&6
-echo "configure:6697: checking for __fpu_control" >&5
+echo "configure:6731: checking for __fpu_control" >&5
if eval "test \"`echo '$''{'ac_cv_func___fpu_control'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6702 "configure"
+#line 6736 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char __fpu_control(); below. */
; return 0; }
EOF
-if { (eval echo configure:6725: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6759: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func___fpu_control=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for __fpu_control in -lieee""... $ac_c" 1>&6
-echo "configure:6743: checking for __fpu_control in -lieee" >&5
+echo "configure:6777: checking for __fpu_control in -lieee" >&5
ac_lib_var=`echo ieee'_'__fpu_control | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lieee $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6751 "configure"
+#line 6785 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
__fpu_control()
; return 0; }
EOF
-if { (eval echo configure:6762: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6796: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# Check for --with-fpectl
echo $ac_n "checking for --with-fpectl""... $ac_c" 1>&6
-echo "configure:6795: checking for --with-fpectl" >&5
+echo "configure:6829: checking for --with-fpectl" >&5
# Check whether --with-fpectl or --without-fpectl was given.
if test "${with_fpectl+set}" = set; then
withval="$with_fpectl"
*) LIBM=-lm
esac
echo $ac_n "checking for --with-libm=STRING""... $ac_c" 1>&6
-echo "configure:6820: checking for --with-libm=STRING" >&5
+echo "configure:6854: checking for --with-libm=STRING" >&5
# Check whether --with-libm or --without-libm was given.
if test "${with_libm+set}" = set; then
withval="$with_libm"
# check for --with-libc=...
echo $ac_n "checking for --with-libc=STRING""... $ac_c" 1>&6
-echo "configure:6841: checking for --with-libc=STRING" >&5
+echo "configure:6875: checking for --with-libc=STRING" >&5
# Check whether --with-libc or --without-libc was given.
if test "${with_libc+set}" = set; then
withval="$with_libc"
for ac_func in hypot
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6865: checking for $ac_func" >&5
+echo "configure:6899: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6870 "configure"
+#line 6904 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6893: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6927: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# check whether malloc(0) returns NULL or not
echo $ac_n "checking what malloc(0) returns""... $ac_c" 1>&6
-echo "configure:6923: checking what malloc(0) returns" >&5
+echo "configure:6957: checking what malloc(0) returns" >&5
if eval "test \"`echo '$''{'ac_cv_malloc_zero'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_malloc_zero=nonnull
else
cat > conftest.$ac_ext <<EOF
-#line 6931 "configure"
+#line 6965 "configure"
#include "confdefs.h"
#include <stdio.h>
#ifdef HAVE_STDLIB
exit(0);
}
EOF
-if { (eval echo configure:6950: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6984: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_malloc_zero=nonnull
else
# check for wchar.h
ac_safe=`echo "wchar.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for wchar.h""... $ac_c" 1>&6
-echo "configure:6976: checking for wchar.h" >&5
+echo "configure:7010: checking for wchar.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6981 "configure"
+#line 7015 "configure"
#include "confdefs.h"
#include <wchar.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6986: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7020: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test "$wchar_h" = yes
then
echo $ac_n "checking size of wchar_t""... $ac_c" 1>&6
-echo "configure:7017: checking size of wchar_t" >&5
+echo "configure:7051: checking size of wchar_t" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_wchar_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_wchar_t=4
else
cat > conftest.$ac_ext <<EOF
-#line 7025 "configure"
+#line 7059 "configure"
#include "confdefs.h"
#include <stdio.h>
exit(0);
}
EOF
-if { (eval echo configure:7038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:7072: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_wchar_t=`cat conftestval`
else
fi
echo $ac_n "checking what type to use for unicode""... $ac_c" 1>&6
-echo "configure:7061: checking what type to use for unicode" >&5
+echo "configure:7095: checking what type to use for unicode" >&5
# Check whether --enable-unicode or --disable-unicode was given.
if test "${enable_unicode+set}" = set; then
enableval="$enable_unicode"
# check for endianness
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:7136: checking whether byte ordering is bigendian" >&5
+echo "configure:7170: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
-#line 7143 "configure"
+#line 7177 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:7154: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7188: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
-#line 7158 "configure"
+#line 7192 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:7169: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7203: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 7189 "configure"
+#line 7223 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
-if { (eval echo configure:7202: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:7236: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
# Check whether right shifting a negative integer extends the sign bit
# or fills with zeros (like the Cray J90, according to Tim Peters).
echo $ac_n "checking whether right shift extends the sign bit""... $ac_c" 1>&6
-echo "configure:7229: checking whether right shift extends the sign bit" >&5
+echo "configure:7263: checking whether right shift extends the sign bit" >&5
if eval "test \"`echo '$''{'ac_cv_rshift_extends_sign'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_rshift_extends_sign=yes
else
cat > conftest.$ac_ext <<EOF
-#line 7238 "configure"
+#line 7272 "configure"
#include "confdefs.h"
int main()
}
EOF
-if { (eval echo configure:7247: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:7281: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_rshift_extends_sign=yes
else
# check for getc_unlocked and related locking functions
echo $ac_n "checking for getc_unlocked() and friends""... $ac_c" 1>&6
-echo "configure:7272: checking for getc_unlocked() and friends" >&5
+echo "configure:7306: checking for getc_unlocked() and friends" >&5
if eval "test \"`echo '$''{'ac_cv_have_getc_unlocked'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7278 "configure"
+#line 7312 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:7290: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7324: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_have_getc_unlocked=yes
else
# check for readline 2.2
cat > conftest.$ac_ext <<EOF
-#line 7313 "configure"
+#line 7347 "configure"
#include "confdefs.h"
#include <readline/readline.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7318: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7352: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $have_readline = yes
then
cat > conftest.$ac_ext <<EOF
-#line 7334 "configure"
+#line 7368 "configure"
#include "confdefs.h"
#include <readline/readline.h>
EOF
# check for readline 4.0
echo $ac_n "checking for rl_pre_input_hook in -lreadline""... $ac_c" 1>&6
-echo "configure:7352: checking for rl_pre_input_hook in -lreadline" >&5
+echo "configure:7386: checking for rl_pre_input_hook in -lreadline" >&5
ac_lib_var=`echo readline'_'rl_pre_input_hook | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lreadline -ltermcap $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7360 "configure"
+#line 7394 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
rl_pre_input_hook()
; return 0; }
EOF
-if { (eval echo configure:7371: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# check for readline 4.2
echo $ac_n "checking for rl_completion_matches in -lreadline""... $ac_c" 1>&6
-echo "configure:7397: checking for rl_completion_matches in -lreadline" >&5
+echo "configure:7431: checking for rl_completion_matches in -lreadline" >&5
ac_lib_var=`echo readline'_'rl_completion_matches | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lreadline -ltermcap $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7405 "configure"
+#line 7439 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
rl_completion_matches()
; return 0; }
EOF
-if { (eval echo configure:7416: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7450: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for broken nice()""... $ac_c" 1>&6
-echo "configure:7441: checking for broken nice()" >&5
+echo "configure:7475: checking for broken nice()" >&5
if eval "test \"`echo '$''{'ac_cv_broken_nice'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_broken_nice=no
else
cat > conftest.$ac_ext <<EOF
-#line 7450 "configure"
+#line 7484 "configure"
#include "confdefs.h"
int main()
}
EOF
-if { (eval echo configure:7462: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:7496: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_broken_nice=yes
else
# On HP/UX 11.0, mvwdelch is a block with a return statement
echo $ac_n "checking whether mvwdelch is an expression""... $ac_c" 1>&6
-echo "configure:7487: checking whether mvwdelch is an expression" >&5
+echo "configure:7521: checking whether mvwdelch is an expression" >&5
if eval "test \"`echo '$''{'ac_cv_mvwdelch_is_expression'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7492 "configure"
+#line 7526 "configure"
#include "confdefs.h"
#include <curses.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:7502: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7536: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mvwdelch_is_expression=yes
else
fi
echo $ac_n "checking whether WINDOW has _flags""... $ac_c" 1>&6
-echo "configure:7525: checking whether WINDOW has _flags" >&5
+echo "configure:7559: checking whether WINDOW has _flags" >&5
if eval "test \"`echo '$''{'ac_cv_window_has_flags'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7530 "configure"
+#line 7564 "configure"
#include "confdefs.h"
#include <curses.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:7540: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7574: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_window_has_flags=yes
else
#endif
EOF
echo $ac_n "checking for socklen_t""... $ac_c" 1>&6
-echo "configure:7571: checking for socklen_t" >&5
+echo "configure:7605: checking for socklen_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_socklen_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7576 "configure"
+#line 7610 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
SRCDIRS="Parser Grammar Objects Python Modules"
echo $ac_n "checking for build directories""... $ac_c" 1>&6
-echo "configure:7632: checking for build directories" >&5
+echo "configure:7666: checking for build directories" >&5
for dir in $SRCDIRS; do
if test ! -d $dir; then
mkdir $dir
projects / thirdparty / Python / cpython.git / commitdiff
