selftests/net: test tcp connection load balancing

Verify that TCP connections use both routes when connecting multiple
times to a remote service over a two nexthop multipath route.

Use socat to create the connections. Use tc prio + tc filter to
count routes taken, counting SYN packets across the two egress
devices. Also verify that the saddr matches that of the device.

To avoid flaky tests when testing inherently randomized behavior,
set a low bar and pass if even a single SYN is observed on each
device.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250424143549.669426-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh
index 3ea6f886a2109277f9c73b9c3a4454304a26a1f5..c58dc4ac2810c36fff7ad8aeacf164fd42bfb198 100755 (executable)
--- a/tools/testing/selftests/net/fib_tests.sh
+++ b/tools/testing/selftests/net/fib_tests.sh
@@ -11,7 +11,7 @@ TESTS="unregister down carrier nexthop suppress ipv6_notify ipv4_notify \
        ipv6_rt ipv4_rt ipv6_addr_metric ipv4_addr_metric ipv6_route_metrics \
        ipv4_route_metrics ipv4_route_v6_gw rp_filter ipv4_del_addr \
        ipv6_del_addr ipv4_mangle ipv6_mangle ipv4_bcast_neigh fib6_gc_test \
-       ipv4_mpath_list ipv6_mpath_list"
+       ipv4_mpath_list ipv6_mpath_list ipv4_mpath_balance ipv6_mpath_balance"
 
 VERBOSE=0
 PAUSE_ON_FAIL=no
@@ -1085,6 +1085,35 @@ route_setup()
        set +e
 }
 
+forwarding_cleanup()
+{
+       cleanup_ns $ns3
+
+       route_cleanup
+}
+
+# extend route_setup with an ns3 reachable through ns2 over both devices
+forwarding_setup()
+{
+       forwarding_cleanup
+
+       route_setup
+
+       setup_ns ns3
+
+       ip link add veth5 netns $ns3 type veth peer name veth6 netns $ns2
+       ip -netns $ns3 link set veth5 up
+       ip -netns $ns2 link set veth6 up
+
+       ip -netns $ns3 -4 addr add dev veth5 172.16.105.1/24
+       ip -netns $ns2 -4 addr add dev veth6 172.16.105.2/24
+       ip -netns $ns3 -4 route add 172.16.100.0/22 via 172.16.105.2
+
+       ip -netns $ns3 -6 addr add dev veth5 2001:db8:105::1/64 nodad
+       ip -netns $ns2 -6 addr add dev veth6 2001:db8:105::2/64 nodad
+       ip -netns $ns3 -6 route add 2001:db8:101::/33 via 2001:db8:105::2
+}
+
 # assumption is that basic add of a single path route works
 # otherwise just adding an address on an interface is broken
 ipv6_rt_add()
@@ -2600,6 +2629,93 @@ ipv6_mpath_list_test()
        route_cleanup
 }
 
+tc_set_flower_counter__saddr_syn() {
+       tc_set_flower_counter $1 $2 $3 "src_ip $4 ip_proto tcp tcp_flags 0x2"
+}
+
+ip_mpath_balance_dep_check()
+{
+       if [ ! -x "$(command -v socat)" ]; then
+               echo "socat command not found. Skipping test"
+               return 1
+       fi
+
+       if [ ! -x "$(command -v jq)" ]; then
+               echo "jq command not found. Skipping test"
+               return 1
+       fi
+}
+
+ip_mpath_balance() {
+       local -r ipver=$1
+       local -r daddr=$2
+       local -r num_conn=20
+
+       for i in $(seq 1 $num_conn); do
+               ip netns exec $ns3 socat $ipver TCP-LISTEN:8000 STDIO >/dev/null &
+               sleep 0.02
+               echo -n a | ip netns exec $ns1 socat $ipver STDIO TCP:$daddr:8000
+       done
+
+       local -r syn0="$(tc_get_flower_counter $ns1 veth1)"
+       local -r syn1="$(tc_get_flower_counter $ns1 veth3)"
+       local -r syns=$((syn0+syn1))
+
+       [ "$VERBOSE" = "1" ] && echo "multipath: syns seen: ($syn0,$syn1)"
+
+       [[ $syns -ge $num_conn ]] && [[ $syn0 -gt 0 ]] && [[ $syn1 -gt 0 ]]
+}
+
+ipv4_mpath_balance_test()
+{
+       echo
+       echo "IPv4 multipath load balance test"
+
+       ip_mpath_balance_dep_check || return 1
+       forwarding_setup
+
+       $IP route add 172.16.105.1 \
+               nexthop via 172.16.101.2 \
+               nexthop via 172.16.103.2
+
+       ip netns exec $ns1 \
+               sysctl -q -w net.ipv4.fib_multipath_hash_policy=1
+
+       tc_set_flower_counter__saddr_syn $ns1 4 veth1 172.16.101.1
+       tc_set_flower_counter__saddr_syn $ns1 4 veth3 172.16.103.1
+
+       ip_mpath_balance -4 172.16.105.1
+
+       log_test $? 0 "IPv4 multipath loadbalance"
+
+       forwarding_cleanup
+}
+
+ipv6_mpath_balance_test()
+{
+       echo
+       echo "IPv6 multipath load balance test"
+
+       ip_mpath_balance_dep_check || return 1
+       forwarding_setup
+
+       $IP route add 2001:db8:105::1\
+               nexthop via 2001:db8:101::2 \
+               nexthop via 2001:db8:103::2
+
+       ip netns exec $ns1 \
+               sysctl -q -w net.ipv6.fib_multipath_hash_policy=1
+
+       tc_set_flower_counter__saddr_syn $ns1 6 veth1 2001:db8:101::1
+       tc_set_flower_counter__saddr_syn $ns1 6 veth3 2001:db8:103::1
+
+       ip_mpath_balance -6 "[2001:db8:105::1]"
+
+       log_test $? 0 "IPv6 multipath loadbalance"
+
+       forwarding_cleanup
+}
+
 ################################################################################
 # usage
 
@@ -2683,6 +2799,8 @@ do
        fib6_gc_test|ipv6_gc)           fib6_gc_test;;
        ipv4_mpath_list)                ipv4_mpath_list_test;;
        ipv6_mpath_list)                ipv6_mpath_list_test;;
+       ipv4_mpath_balance)             ipv4_mpath_balance_test;;
+       ipv6_mpath_balance)             ipv6_mpath_balance_test;;
 
        help) echo "Test names: $TESTS"; exit 0;;
        esac

diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh
index 701905eeff66d853a27f84e94198b3d4dea50f0b..7e1e563186253efa9aba18b7b21087f9cb8e1d62 100644 (file)
--- a/tools/testing/selftests/net/lib.sh
+++ b/tools/testing/selftests/net/lib.sh
@@ -270,6 +270,30 @@ tc_rule_handle_stats_get()
                  .options.actions[0].stats$selector"
 }
 
+# attach a qdisc with two children match/no-match and a flower filter to match
+tc_set_flower_counter() {
+       local -r ns=$1
+       local -r ipver=$2
+       local -r dev=$3
+       local -r flower_expr=$4
+
+       tc -n $ns qdisc add dev $dev root handle 1: prio bands 2 \
+                       priomap 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+
+       tc -n $ns qdisc add dev $dev parent 1:1 handle 11: pfifo
+       tc -n $ns qdisc add dev $dev parent 1:2 handle 12: pfifo
+
+       tc -n $ns filter add dev $dev parent 1: protocol ipv$ipver \
+                       flower $flower_expr classid 1:2
+}
+
+tc_get_flower_counter() {
+       local -r ns=$1
+       local -r dev=$2
+
+       tc -n $ns -j -s qdisc show dev $dev handle 12: | jq .[0].packets
+}
+
 ret_set_ksft_status()
 {
        local ksft_status=$1; shift