38bfae3 has moved the contents written to files by pg_upgrade under a
new directory called pg_upgrade_output.d/ located in the new cluster's
data folder, and it used a simple structure made of two subdirectories
leading to a fixed structure: log/ and dump/. This design has made
weaker pg_upgrade on repeated calls, as we could get failures when
creating one or more of those directories, while potentially losing the
logs of a previous run (logs are retained automatically on failure, and
cleaned up on success unless --retain is specified). So a user would
need to clean up pg_upgrade_output.d/ as an extra step for any repeated
calls of pg_upgrade. The most common scenario here is --check followed
by the actual upgrade, but one could see a failure when specifying an
incorrect input argument value. Removing entirely the logs would have
the disadvantage of removing all the past information, even if --retain
was specified at some past step.
This result is annoying for a lot of users and automated upgrade flows.
So, rather than requiring a manual removal of pg_upgrade_output.d/, this
redesigns the set of output directories in a more dynamic way, based on
a suggestion from Tom Lane and Daniel Gustafsson. pg_upgrade_output.d/
is still the base path, but a second directory level is added, mostly
named after an ISO-8601-formatted timestamp (in short human-readable,
with milliseconds appended to the name to avoid any conflicts). The
logs and dumps are saved within the same subdirectories as previously,
as of log/ and dump/, but these are located inside the subdirectory
named after the timestamp.
The logs of a given run are removed only after a successful run if
--retain is not used, and pg_upgrade_output.d/ is kept if there are any
logs from a previous run. Note that previously, pg_upgrade would have
kept the logs even after a successful --check but that was inconsistent
compared to the case without --check when using --retain. The code in
charge of the removal of the output directories is now refactored into a
single routine.
Two TAP tests are added with some --check commands (one failure case and
one success case), to look after the issue fixed here. Note that the
tests had to be tweaked a bit to fit with the new directory structure so
as it can find any logs generated on failure. This is still going to
require a change in the buildfarm client for the case where pg_upgrade
is tested without the TAP test, though, but I'll tackle that with a
separate patch where needed.
Reported-by: Tushar Ahuja
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson, Justin Pryzby
Discussion: https://postgr.es/m/
77e6ecaa-2785-97aa-f229-
4b6e047cbd2b@enterprisedb.com
<para>
<application>pg_upgrade</application> creates various working files, such
as schema dumps, stored within <literal>pg_upgrade_output.d</literal> in
- the directory of the new cluster.
+ the directory of the new cluster. Each run creates a new subdirectory named
+ with a timestamp formatted as per ISO 8601
+ (<literal>%Y%m%dT%H%M%S</literal>), where all the generated files are
+ stored.
</para>
<para>
pg_log(PG_REPORT, "\n*Clusters are compatible*\n");
/* stops new cluster */
stop_postmaster(false);
+
+ cleanup_output_dirs();
exit(0);
}
static void set_frozenxids(bool minmxid_only);
static void make_outputdirs(char *pgdata);
static void setup(char *argv0, bool *live_check);
-static void cleanup(void);
ClusterInfo old_cluster,
new_cluster;
pg_free(deletion_script_file_name);
- cleanup();
+ cleanup_output_dirs();
return 0;
}
char **filename;
time_t run_time = time(NULL);
char filename_path[MAXPGPATH];
+ char timebuf[128];
+ struct timeval time;
+ time_t tt;
+ int len;
+
+ log_opts.rootdir = (char *) pg_malloc0(MAXPGPATH);
+ len = snprintf(log_opts.rootdir, MAXPGPATH, "%s/%s", pgdata, BASE_OUTPUTDIR);
+ if (len >= MAXPGPATH)
+ pg_fatal("buffer for root directory too small");
+
+ /* BASE_OUTPUTDIR/$timestamp/ */
+ gettimeofday(&time, NULL);
+ tt = (time_t) time.tv_sec;
+ strftime(timebuf, sizeof(timebuf), "%Y%m%dT%H%M%S", localtime(&tt));
+ /* append milliseconds */
+ snprintf(timebuf + strlen(timebuf), sizeof(timebuf) - strlen(timebuf),
+ ".%03d", (int) (time.tv_usec / 1000));
+ log_opts.basedir = (char *) pg_malloc0(MAXPGPATH);
+ len = snprintf(log_opts.basedir, MAXPGPATH, "%s/%s", log_opts.rootdir,
+ timebuf);
+ if (len >= MAXPGPATH)
+ pg_fatal("buffer for base directory too small");
+
+ /* BASE_OUTPUTDIR/$timestamp/dump/ */
+ log_opts.dumpdir = (char *) pg_malloc0(MAXPGPATH);
+ len = snprintf(log_opts.dumpdir, MAXPGPATH, "%s/%s/%s", log_opts.rootdir,
+ timebuf, DUMP_OUTPUTDIR);
+ if (len >= MAXPGPATH)
+ pg_fatal("buffer for dump directory too small");
+
+ /* BASE_OUTPUTDIR/$timestamp/log/ */
+ log_opts.logdir = (char *) pg_malloc0(MAXPGPATH);
+ len = snprintf(log_opts.logdir, MAXPGPATH, "%s/%s/%s", log_opts.rootdir,
+ timebuf, LOG_OUTPUTDIR);
+ if (len >= MAXPGPATH)
+ pg_fatal("buffer for log directory too small");
- log_opts.basedir = (char *) pg_malloc(MAXPGPATH);
- snprintf(log_opts.basedir, MAXPGPATH, "%s/%s", pgdata, BASE_OUTPUTDIR);
- log_opts.dumpdir = (char *) pg_malloc(MAXPGPATH);
- snprintf(log_opts.dumpdir, MAXPGPATH, "%s/%s", pgdata, DUMP_OUTPUTDIR);
- log_opts.logdir = (char *) pg_malloc(MAXPGPATH);
- snprintf(log_opts.logdir, MAXPGPATH, "%s/%s", pgdata, LOG_OUTPUTDIR);
-
- if (mkdir(log_opts.basedir, pg_dir_create_mode))
+ /*
+ * Ignore the error case where the root path exists, as it is kept the
+ * same across runs.
+ */
+ if (mkdir(log_opts.rootdir, pg_dir_create_mode) < 0 && errno != EEXIST)
+ pg_fatal("could not create directory \"%s\": %m\n", log_opts.rootdir);
+ if (mkdir(log_opts.basedir, pg_dir_create_mode) < 0)
pg_fatal("could not create directory \"%s\": %m\n", log_opts.basedir);
- if (mkdir(log_opts.dumpdir, pg_dir_create_mode))
+ if (mkdir(log_opts.dumpdir, pg_dir_create_mode) < 0)
pg_fatal("could not create directory \"%s\": %m\n", log_opts.dumpdir);
- if (mkdir(log_opts.logdir, pg_dir_create_mode))
+ if (mkdir(log_opts.logdir, pg_dir_create_mode) < 0)
pg_fatal("could not create directory \"%s\": %m\n", log_opts.logdir);
snprintf(filename_path, sizeof(filename_path), "%s/%s", log_opts.logdir,
check_ok();
}
-
-
-static void
-cleanup(void)
-{
- fclose(log_opts.internal);
-
- /* Remove dump and log files? */
- if (!log_opts.retain)
- (void) rmtree(log_opts.basedir, true);
-}
#define DB_DUMP_FILE_MASK "pg_upgrade_dump_%u.custom"
/*
- * Base directories that include all the files generated internally,
- * from the root path of the new cluster.
+ * Base directories that include all the files generated internally, from the
+ * root path of the new cluster. The paths are dynamically built as of
+ * BASE_OUTPUTDIR/$timestamp/{LOG_OUTPUTDIR,DUMP_OUTPUTDIR} to ensure their
+ * uniqueness in each run.
*/
#define BASE_OUTPUTDIR "pg_upgrade_output.d"
-#define LOG_OUTPUTDIR BASE_OUTPUTDIR "/log"
-#define DUMP_OUTPUTDIR BASE_OUTPUTDIR "/dump"
+#define LOG_OUTPUTDIR "log"
+#define DUMP_OUTPUTDIR "dump"
#define DB_DUMP_LOG_FILE_MASK "pg_upgrade_dump_%u.log"
#define SERVER_LOG_FILE "pg_upgrade_server.log"
bool verbose; /* true -> be verbose in messages */
bool retain; /* retain log files on success */
/* Set of internal directories for output files */
- char *basedir; /* Base output directory */
+ char *rootdir; /* Root directory, aka pg_upgrade_output.d */
+ char *basedir; /* Base output directory, with timestamp */
char *dumpdir; /* Dumps */
char *logdir; /* Log files */
bool isatty; /* is stdout a tty */
void pg_log(eLogType type, const char *fmt,...) pg_attribute_printf(2, 3);
void pg_fatal(const char *fmt,...) pg_attribute_printf(1, 2) pg_attribute_noreturn();
void end_progress_output(void);
+void cleanup_output_dirs(void);
void prep_status(const char *fmt,...) pg_attribute_printf(1, 2);
void prep_status_progress(const char *fmt,...) pg_attribute_printf(1, 2);
unsigned int str2uint(const char *str);
use Cwd qw(abs_path);
use File::Basename qw(dirname);
use File::Compare;
+use File::Find qw(find);
+use File::Path qw(rmtree);
use PostgreSQL::Test::Cluster;
use PostgreSQL::Test::Utils;
# Upgrade the instance.
$oldnode->stop;
+
+# Cause a failure at the start of pg_upgrade, this should create the logging
+# directory pg_upgrade_output.d but leave it around. Keep --check for an
+# early exit.
+command_fails(
+ [
+ 'pg_upgrade', '--no-sync',
+ '-d', $oldnode->data_dir,
+ '-D', $newnode->data_dir,
+ '-b', $oldbindir . '/does/not/exist/',
+ '-B', $newbindir,
+ '-p', $oldnode->port,
+ '-P', $newnode->port,
+ '--check'
+ ],
+ 'run of pg_upgrade --check for new instance with incorrect binary path');
+ok(-d $newnode->data_dir . "/pg_upgrade_output.d",
+ "pg_upgrade_output.d/ not removed after pg_upgrade failure");
+rmtree($newnode->data_dir . "/pg_upgrade_output.d");
+
+# --check command works here, cleans up pg_upgrade_output.d.
+command_ok(
+ [
+ 'pg_upgrade', '--no-sync', '-d', $oldnode->data_dir,
+ '-D', $newnode->data_dir, '-b', $oldbindir,
+ '-B', $newbindir, '-p', $oldnode->port,
+ '-P', $newnode->port, '--check'
+ ],
+ 'run of pg_upgrade --check for new instance');
+ok( !-d $newnode->data_dir . "/pg_upgrade_output.d",
+ "pg_upgrade_output.d/ not removed after pg_upgrade --check success");
+
+# Actual run, pg_upgrade_output.d is removed at the end.
command_ok(
[
'pg_upgrade', '--no-sync', '-d', $oldnode->data_dir,
'-P', $newnode->port
],
'run of pg_upgrade for new instance');
+ok( !-d $newnode->data_dir . "/pg_upgrade_output.d",
+ "pg_upgrade_output.d/ removed after pg_upgrade success");
+
$newnode->start;
# Check if there are any logs coming from pg_upgrade, that would only be
# retained on failure.
-my $log_path = $newnode->data_dir . "/pg_upgrade_output.d/log";
+my $log_path = $newnode->data_dir . "/pg_upgrade_output.d";
if (-d $log_path)
{
- foreach my $log (glob("$log_path/*"))
+ my @log_files;
+ find(
+ sub {
+ push @log_files, $File::Find::name
+ if $File::Find::name =~ m/.*\.log/;
+ },
+ $newnode->data_dir . "/pg_upgrade_output.d");
+ foreach my $log (@log_files)
{
note "=== contents of $log ===\n";
print slurp_file($log);
pg_log(PG_REPORT, "%-*s", MESSAGE_WIDTH, "");
}
+/*
+ * Remove any logs generated internally. To be used once when exiting.
+ */
+void
+cleanup_output_dirs(void)
+{
+ fclose(log_opts.internal);
+
+ /* Remove dump and log files? */
+ if (log_opts.retain)
+ return;
+
+ (void) rmtree(log_opts.basedir, true);
+
+ /* Remove pg_upgrade_output.d only if empty */
+ switch (pg_check_dir(log_opts.rootdir))
+ {
+ case 0: /* non-existent */
+ case 3: /* exists and contains a mount point */
+ Assert(false);
+ break;
+
+ case 1: /* exists and empty */
+ case 2: /* exists and contains only dot files */
+ (void) rmtree(log_opts.rootdir, true);
+ break;
+
+ case 4: /* exists */
+
+ /*
+ * Keep the root directory as this includes some past log
+ * activity.
+ */
+ break;
+
+ default:
+ /* different failure, just report it */
+ pg_log(PG_WARNING, "could not access directory \"%s\": %m",
+ log_opts.rootdir);
+ break;
+ }
+}
/*
* prep_status
projects / thirdparty / postgresql.git / commitdiff
