]> git.ipfire.org Git - thirdparty/kernel/linux.git/commitdiff
arm64: dts: rockchip: Add ArmSoM W3 board
authorJianfeng Liu <liujianfeng1994@gmail.com>
Wed, 18 Sep 2024 16:50:08 +0000 (00:50 +0800)
committerHeiko Stuebner <heiko@sntech.de>
Mon, 30 Sep 2024 09:59:42 +0000 (11:59 +0200)
W3 is the carrier board for LM7 System on Module.

W3 features:
- 1x 2.5GbE Realtek RTL8125 Ethernet
- 2x HDMI Type A out
- 1x HDMI Type A in
- 1x USB 3.1 Type C
- 2x USB 2.0 Type A
- 2x USB 3.0 Type A
- 1x PCIE 2.0 M.2 E Key (1 lane)
- 1x PCIE 3.0 PCIe (4 lanes)
- 1x TF scard slot
- 1x MIPI CSI
- 1x MIPI DSI
- 1x ES8316 audio jack
- 1x FAN connector
- 1x RTC
- 40-pin expansion header

Add support for ArmSoM LM7 board.

Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Link: https://lore.kernel.org/r/20240918165008.169917-4-liujianfeng1994@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
arch/arm64/boot/dts/rockchip/Makefile
arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts [new file with mode: 0644]

index 09423070c99282a957969beb8376d6acc2faa557..b0ed12f41f02f4fc5d192980cf7e97ea5c10a007 100644 (file)
@@ -125,6 +125,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-w3.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-genbook.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts b/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts
new file mode 100644 (file)
index 0000000..12abbab
--- /dev/null
@@ -0,0 +1,408 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3588-armsom-lm7.dtsi"
+
+/ {
+       model = "ArmSoM W3";
+       compatible = "armsom,w3", "armsom,lm7", "rockchip,rk3588";
+
+       aliases {
+               mmc1 = &sdmmc;
+               mmc2 = &sdio;
+       };
+
+       analog-sound {
+               compatible = "audio-graph-card";
+               label = "rk3588-es8316";
+
+               widgets = "Microphone", "Mic Jack",
+                         "Headphone", "Headphones";
+
+               routing = "MIC2", "Mic Jack",
+                         "Headphones", "HPOL",
+                         "Headphones", "HPOR";
+
+               dais = <&i2s0_8ch_p0>;
+               hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&hp_detect>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_rgb_b>;
+
+               led-rgb-b {
+                       function = LED_FUNCTION_STATUS;
+                       color = <LED_COLOR_ID_BLUE>;
+                       gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "heartbeat";
+               };
+
+               led-rgb-r {
+                       function = LED_FUNCTION_STATUS;
+                       color = <LED_COLOR_ID_RED>;
+                       gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "none";
+               };
+       };
+
+       fan: pwm-fan {
+               compatible = "pwm-fan";
+               cooling-levels = <0 120 150 180 210 240 255>;
+               fan-supply = <&vcc5v0_sys>;
+               pwms = <&pwm1 0 50000 0>;
+               #cooling-cells = <2>;
+       };
+
+       rfkill {
+               compatible = "rfkill-gpio";
+               label = "rfkill-pcie-wlan";
+               radio-type = "wlan";
+               shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+       };
+
+       rfkill-bt {
+               compatible = "rfkill-gpio";
+               label = "rfkill-m2-bt";
+               radio-type = "bluetooth";
+               shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+       };
+
+       vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pcie2_0_vcc3v3_en>;
+               regulator-name = "vcc3v3_pcie2x1l0";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               startup-delay-us = <50000>;
+               vin-supply = <&vcc5v0_sys>;
+       };
+
+       vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc3v3_pcie2x1l2";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               startup-delay-us = <5000>;
+               vin-supply = <&vcc_3v3_s3>;
+       };
+
+       vcc3v3_pcie30: vcc3v3-pcie30-regulator {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pcie3_vcc3v3_en>;
+               regulator-name = "vcc3v3_pcie30";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               startup-delay-us = <5000>;
+               vin-supply = <&vcc5v0_sys>;
+       };
+
+       vcc5v0_host: vcc5v0-host-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc5v0_host";
+               regulator-boot-on;
+               regulator-always-on;
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               enable-active-high;
+               gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&vcc5v0_host_en>;
+               vin-supply = <&vcc5v0_sys>;
+       };
+};
+
+&combphy0_ps {
+       status = "okay";
+};
+
+&combphy1_ps {
+       status = "okay";
+};
+
+&combphy2_psu {
+       status = "okay";
+};
+
+&i2c6 {
+       status = "okay";
+
+       hym8563: rtc@51 {
+               compatible = "haoyu,hym8563";
+               reg = <0x51>;
+               #clock-cells = <0>;
+               clock-output-names = "hym8563";
+               pinctrl-names = "default";
+               pinctrl-0 = <&hym8563_int>;
+               interrupt-parent = <&gpio0>;
+               interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+               wakeup-source;
+       };
+};
+
+&i2c7 {
+       status = "okay";
+
+       es8316: audio-codec@11 {
+               compatible = "everest,es8316";
+               reg = <0x11>;
+               clocks = <&cru I2S0_8CH_MCLKOUT>;
+               clock-names = "mclk";
+               assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+               assigned-clock-rates = <12288000>;
+               #sound-dai-cells = <0>;
+
+               port {
+                       es8316_p0_0: endpoint {
+                               remote-endpoint = <&i2s0_8ch_p0_0>;
+                       };
+               };
+       };
+};
+
+&i2s0_8ch {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2s0_lrck
+                    &i2s0_mclk
+                    &i2s0_sclk
+                    &i2s0_sdi0
+                    &i2s0_sdo0>;
+       status = "okay";
+
+       i2s0_8ch_p0: port {
+               i2s0_8ch_p0_0: endpoint {
+                       dai-format = "i2s";
+                       mclk-fs = <256>;
+                       remote-endpoint = <&es8316_p0_0>;
+               };
+       };
+};
+
+&package_thermal {
+       polling-delay = <1000>;
+
+       trips {
+               package_fan0: package-fan0 {
+                       temperature = <55000>;
+                       hysteresis = <2000>;
+                       type = "active";
+               };
+
+               package_fan1: package-fan1 {
+                       temperature = <65000>;
+                       hysteresis = <2000>;
+                       type = "active";
+               };
+       };
+
+       cooling-maps {
+               map0 {
+                       trip = <&package_fan0>;
+                       cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+               };
+
+               map1 {
+                       trip = <&package_fan1>;
+                       cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+               };
+       };
+};
+
+&pcie2x1l0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pcie2_0_rst>;
+       reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+       vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
+       status = "okay";
+};
+
+&pcie2x1l2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pcie2_2_rst>;
+       reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+       vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
+       status = "okay";
+};
+
+&pcie30phy {
+       status = "okay";
+};
+
+&pcie3x4 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pcie3_rst>;
+       reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+       vpcie3v3-supply = <&vcc3v3_pcie30>;
+       status = "okay";
+};
+
+&pinctrl {
+       hym8563 {
+               hym8563_int: hym8563-int {
+                       rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       leds {
+               led_rgb_b: led-rgb-b {
+                       rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       sound {
+               hp_detect: hp-detect {
+                       rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       pcie2 {
+               pcie2_0_rst: pcie2-0-rst {
+                       rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               pcie2_0_vcc3v3_en: pcie2-0-vcc-en {
+                       rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               pcie2_2_rst: pcie2-2-rst {
+                       rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       pcie3 {
+               pcie3_rst: pcie3-rst {
+                       rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               pcie3_vcc3v3_en: pcie3-vcc3v3-en {
+                       rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       usb {
+               vcc5v0_host_en: vcc5v0-host-en {
+                       rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+};
+
+&pwm1 {
+       status = "okay";
+};
+
+&sdmmc {
+       bus-width = <4>;
+       cap-mmc-highspeed;
+       cap-sd-highspeed;
+       cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+       disable-wp;
+       max-frequency = <200000000>;
+       no-sdio;
+       no-mmc;
+       sd-uhs-sdr104;
+       vmmc-supply = <&vcc_3v3_s3>;
+       vqmmc-supply = <&vccio_sd_s0>;
+       status = "okay";
+};
+
+&sdio {
+       bus-width = <4>;
+       cap-sdio-irq;
+       disable-wp;
+       keep-power-in-suspend;
+       max-frequency = <200000000>;
+       no-sd;
+       no-mmc;
+       non-removable;
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdiom0_pins>;
+       sd-uhs-sdr12;
+       sd-uhs-sdr25;
+       sd-uhs-sdr50;
+       sd-uhs-sdr104;
+       vmmc-supply = <&vcc3v3_pcie2x1l0>;
+       vqmmc-supply = <&vcc_1v8_s3>;
+       wakeup-source;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-0 = <&uart2m0_xfer>;
+       status = "okay";
+};
+
+&uart6 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
+       status = "okay";
+};
+
+&u2phy1 {
+       status = "okay";
+};
+
+&u2phy1_otg {
+       status = "okay";
+};
+
+&u2phy2 {
+       status = "okay";
+};
+
+&u2phy2_host {
+       /* connected to USB hub, which is powered by vcc5v0_sys */
+       phy-supply = <&vcc5v0_sys>;
+       status = "okay";
+};
+
+&u2phy3 {
+       status = "okay";
+};
+
+&u2phy3_host {
+       phy-supply = <&vcc5v0_host>;
+       status = "okay";
+};
+
+&usbdp_phy1 {
+       status = "okay";
+};
+
+&usb_host0_ehci {
+       status = "okay";
+};
+
+&usb_host0_ohci {
+       status = "okay";
+};
+
+&usb_host1_ehci {
+       status = "okay";
+};
+
+&usb_host1_ohci {
+       status = "okay";
+};
+
+&usb_host1_xhci {
+       dr_mode = "host";
+       status = "okay";
+};
+
+&usb_host2_xhci {
+       status = "okay";
+};