arm64: dts: qcom: Add Monaco Monza SoM

The Monaco Monza SoM is a compact computing module that integrates a
Monaco/QCS8300 System on Chip (SoC), along with essential components
optimized for IoT applications. It is designed to be mounted on
carrier boards, enabling the development of complete embedded systems.

The following components are described:
- Fixed S2S 1.8V rail
- PMM8654AU RPMh regulators (PMIC A and PMIC C)
- Display subsystem/phy supplies (DSI, DP)
- Enable GPU, GPI DMA, IRIS
- PCIe Gen4 for both controllers and PHY supply hookups
- QUPv3 firmware declarations
- REFGEN always-on workaround for USB2 HS PHY
- Remoteproc firmware names for ADSP, CDSP and GPDSP
- Ethernet SERDES supplies
- USB HS/SS PHY regulators
- On-SoM eMMC

Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260313103824.2634519-5-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/monaco-monza-som.dtsi b/arch/arm64/boot/dts/qcom/monaco-monza-som.dtsi
new file mode 100644 (file)
index 0000000..9b5ed55
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/monaco-monza-som.dtsi
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "monaco.dtsi"
+#include "monaco-pmics.dtsi"
+
+/ {
+       /* This comes from a PMIC handled within the SAIL domain */
+       vreg_s2s: vreg-s2s {
+               compatible = "regulator-fixed";
+               regulator-name = "vreg_s2s";
+
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+       };
+};
+
+&apps_rsc {
+       regulators-0 {
+               compatible = "qcom,pmm8654au-rpmh-regulators";
+               qcom,pmic-id = "a";
+
+               vreg_l3a: ldo3 {
+                       regulator-name = "vreg_l3a";
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allow-set-load;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+                       regulator-always-on;
+               };
+
+               vreg_l4a: ldo4 {
+                       regulator-name = "vreg_l4a";
+                       regulator-min-microvolt = <880000>;
+                       regulator-max-microvolt = <912000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allow-set-load;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l5a: ldo5 {
+                       regulator-name = "vreg_l5a";
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allow-set-load;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l6a: ldo6 {
+                       regulator-name = "vreg_l6a";
+                       regulator-min-microvolt = <880000>;
+                       regulator-max-microvolt = <912000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allow-set-load;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l7a: ldo7 {
+                       regulator-name = "vreg_l7a";
+                       regulator-min-microvolt = <880000>;
+                       regulator-max-microvolt = <912000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allow-set-load;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l8a: ldo8 {
+                       regulator-name = "vreg_l8a";
+                       regulator-min-microvolt = <2504000>;
+                       regulator-max-microvolt = <2960000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allow-set-load;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l9a: ldo9 {
+                       regulator-name = "vreg_l9a";
+                       regulator-min-microvolt = <2970000>;
+                       regulator-max-microvolt = <3072000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allow-set-load;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+               };
+       };
+
+       regulators-1 {
+               compatible = "qcom,pmm8654au-rpmh-regulators";
+               qcom,pmic-id = "c";
+
+               vreg_s5c: smps5 { /* LPDDR VDD2H */
+                       regulator-name = "vreg_s5c";
+                       regulator-min-microvolt = <1104000>;
+                       regulator-max-microvolt = <1104000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l1c: ldo1 { /* LPDDR VDDQ */
+                       regulator-name = "vreg_l1c";
+                       regulator-min-microvolt = <300000>;
+                       regulator-max-microvolt = <512000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allow-set-load;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l2c: ldo2 { /* LPDDR VDD2L */
+                       regulator-name = "vreg_l2c";
+                       regulator-min-microvolt = <900000>;
+                       regulator-max-microvolt = <904000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allow-set-load;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l4c: ldo4 {
+                       regulator-name = "vreg_l4c";
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1200000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allow-set-load;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l7c: ldo7 {
+                       regulator-name = "vreg_l7c";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allow-set-load;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l8c: ldo8 { /* LPDDR VDD1 */
+                       regulator-name = "vreg_l8c";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allow-set-load;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l9c: ldo9 { /* QFPROM */
+                       regulator-name = "vreg_l9c";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allow-set-load;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+               };
+       };
+};
+
+&mdss_dp0 {
+       pinctrl-0 = <&dp_hpd>;
+       pinctrl-names = "default";
+};
+
+&mdss_dp0_phy {
+       vdda-phy-supply = <&vreg_l5a>;
+       vdda-pll-supply = <&vreg_l4a>;
+};
+
+&mdss_dsi0 {
+       vdda-supply = <&vreg_l5a>;
+};
+
+&mdss_dsi0_phy {
+       vdds-supply = <&vreg_l4a>;
+};
+
+&gpi_dma0 {
+       status = "okay";
+};
+
+&gpi_dma1 {
+       status = "okay";
+};
+
+&gpu {
+       status = "okay";
+};
+
+&gpu_zap_shader {
+       firmware-name = "qcom/qcs8300/a623_zap.mbn";
+};
+
+&iris {
+       status = "okay";
+};
+
+/* PCIe0 Gen4 x2 */
+&pcie0 {
+       iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
+                   <0x100 &pcie_smmu 0x0001 0x1>,
+                   <0x200 &pcie_smmu 0x0007 0x1>,
+                   <0x208 &pcie_smmu 0x0002 0x1>,
+                   <0x210 &pcie_smmu 0x0003 0x1>,
+                   <0x218 &pcie_smmu 0x0004 0x1>,
+                   <0x300 &pcie_smmu 0x0005 0x1>,
+                   <0x400 &pcie_smmu 0x0006 0x1>;
+
+       status = "okay";
+};
+
+&pcie0_phy {
+       vdda-phy-supply = <&vreg_l6a>;
+       vdda-pll-supply = <&vreg_l5a>;
+
+       status = "okay";
+};
+
+/* PCIe1 Gen4 x4 */
+&pcie1 {
+       status = "okay";
+};
+
+&pcie1_phy {
+       vdda-phy-supply = <&vreg_l6a>;
+       vdda-pll-supply = <&vreg_l5a>;
+
+       status = "okay";
+};
+
+&qupv3_id_0 {
+       firmware-name = "qcom/qcs8300/qupv3fw.elf";
+
+       status = "okay";
+};
+
+&qupv3_id_1 {
+       firmware-name = "qcom/qcs8300/qupv3fw.elf";
+       status = "okay";
+};
+
+/* There is a HW/FW issue preventing proper REFGEN hardware voting
+ * for the USB2 HS PHY. As a workaround, we force REFGEN to stay
+ * always‑on in software, matching initial bootloader config.
+ */
+&refgen {
+       regulator-always-on;
+};
+
+&remoteproc_adsp {
+       firmware-name = "qcom/qcs8300/adsp.mbn";
+
+       status = "okay";
+};
+
+&remoteproc_cdsp {
+       firmware-name = "qcom/qcs8300/cdsp0.mbn";
+
+       status = "okay";
+};
+
+&remoteproc_gpdsp {
+       firmware-name = "qcom/qcs8300/gpdsp0.mbn";
+
+       status = "okay";
+};
+
+/* OnSom eMMC */
+&sdhc_1 {
+       vmmc-supply = <&vreg_l8a>;
+       vqmmc-supply = <&vreg_s2s>;
+
+       bus-width = <8>;
+       mmc-ddr-1_8v;
+       mmc-hs200-1_8v;
+       mmc-hs400-1_8v;
+       mmc-hs400-enhanced-strobe;
+
+       no-sd;
+       no-sdio;
+       non-removable;
+
+       status = "okay";
+};
+
+/* Ethernet/SGMII */
+&serdes0 {
+       phy-supply = <&vreg_l5a>;
+
+       status = "okay";
+};
+
+&tlmm {
+       dp_hpd: dp-hpd-state {
+               pins = "gpio94";
+               function = "edp0_hot";
+               bias-disable;
+       };
+};
+
+/* USB0 HS + SS */
+&usb_1_hsphy {
+       vdda-pll-supply = <&vreg_l7a>;
+       vdda18-supply = <&vreg_l7c>;
+       vdda33-supply = <&vreg_l9a>;
+
+       status = "okay";
+};
+
+&usb_qmpphy {
+       vdda-phy-supply = <&vreg_l7a>;
+       vdda-pll-supply = <&vreg_l5a>;
+
+       status = "okay";
+};
+
+/* USB1 HS */
+&usb_2_hsphy {
+       vdda-pll-supply = <&vreg_l7a>;
+       vdda18-supply = <&vreg_l7c>;
+       vdda33-supply = <&vreg_l9a>;
+
+       status = "okay";
+};