ACPI: battery: Add support for charge limiting state

The ACPI specification says that bit 3 inside the battery state
signals that the battery is in charge limiting state. In this state,
the platform limits the battery from reaching its full capacity, the
exact limit is platform-specific.

This might explain why a number of batteries reported a "Unknown"
battery state in the past when using platform-specific interfaces to
stop battery charging at a user defined level.

Unfortunately not all platforms set this bit in such cases, so
"non-charging" is still the default state when the battery is neither
charging, discharging or full.

Tested on a Lenovo Ideapad S145-14IWL.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20240620191410.3646-1-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index d289b98a2ccae7311494c4b6615ae9baf199134b..9ba2191a96d6405fe377e9b946471e34d5376461 100644 (file)
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -38,9 +38,10 @@
 /* Battery power unit: 0 means mW, 1 means mA */
 #define ACPI_BATTERY_POWER_UNIT_MA     1
 
-#define ACPI_BATTERY_STATE_DISCHARGING 0x1
-#define ACPI_BATTERY_STATE_CHARGING    0x2
-#define ACPI_BATTERY_STATE_CRITICAL    0x4
+#define ACPI_BATTERY_STATE_DISCHARGING         0x1
+#define ACPI_BATTERY_STATE_CHARGING            0x2
+#define ACPI_BATTERY_STATE_CRITICAL            0x4
+#define ACPI_BATTERY_STATE_CHARGE_LIMITING     0x8
 
 #define MAX_STRING_LENGTH      64
 
@@ -155,7 +156,7 @@ static int acpi_battery_get_state(struct acpi_battery *battery);
 
 static int acpi_battery_is_charged(struct acpi_battery *battery)
 {
-       /* charging, discharging or critical low */
+       /* charging, discharging, critical low or charge limited */
        if (battery->state != 0)
                return 0;
 
@@ -215,6 +216,8 @@ static int acpi_battery_get_property(struct power_supply *psy,
                        val->intval = acpi_battery_handle_discharging(battery);
                else if (battery->state & ACPI_BATTERY_STATE_CHARGING)
                        val->intval = POWER_SUPPLY_STATUS_CHARGING;
+               else if (battery->state & ACPI_BATTERY_STATE_CHARGE_LIMITING)
+                       val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
                else if (acpi_battery_is_charged(battery))
                        val->intval = POWER_SUPPLY_STATUS_FULL;
                else