--- /dev/null
+From e461894dc2ce7778ccde1c3483c9b15a85a7fc5f Mon Sep 17 00:00:00 2001
+From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+Date: Thu, 15 Jan 2015 03:06:22 +0100
+Subject: ARM: 8284/1: sa1100: clear RCSR_SMR on resume
+
+From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+
+commit e461894dc2ce7778ccde1c3483c9b15a85a7fc5f upstream.
+
+StrongARM core uses RCSR SMR bit to tell to bootloader that it was reset
+by entering the sleep mode. After we have resumed, there is little point
+in having that bit enabled. Moreover, if this bit is set before reboot,
+the bootloader can become confused. Thus clear the SMR bit on resume
+just before clearing the scratchpad (resume address) register.
+
+Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ arch/arm/mach-sa1100/pm.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm/mach-sa1100/pm.c
++++ b/arch/arm/mach-sa1100/pm.c
+@@ -81,6 +81,7 @@ static int sa11x0_pm_enter(suspend_state
+ /*
+ * Ensure not to come back here if it wasn't intended
+ */
++ RCSR = RCSR_SMR;
+ PSPR = 0;
+
+ /*
--- /dev/null
+From 1c7e36bfc3e2fb2df5e2d1989a4b6fb9055a0f9b Mon Sep 17 00:00:00 2001
+From: Lokesh Vutla <lokeshvutla@ti.com>
+Date: Thu, 8 Jan 2015 17:22:04 +0530
+Subject: ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL enabled on UART3
+
+From: Lokesh Vutla <lokeshvutla@ti.com>
+
+commit 1c7e36bfc3e2fb2df5e2d1989a4b6fb9055a0f9b upstream.
+
+With commit '7dedd34: ARM: OMAP2+: hwmod: Fix a crash in _setup_reset()
+with DEBUG_LL' we moved from parsing cmdline to identify uart used
+for earlycon to using the requsite hwmod CONFIG_DEBUG_OMAPxUARTy FLAGS.
+
+On DRA7 UART3 hwmod doesn't have this flag enabled, and atleast on
+BeagleBoard-X15, where we use UART3 for console, boot fails with
+DEBUG_LL enabled. Enable DEBUG_OMAP4UART3_FLAGS for UART3 hwmod.
+
+For using DEBUG_LL, enable CONFIG_DEBUG_OMAP4UART3 in menuconfig.
+
+Fixes: 90020c7b2c5e ("ARM: OMAP: DRA7: hwmod: Create initial DRA7XX SoC data")
+Reviewed-by: Felipe Balbi <balbi@ti.com>
+Acked-by: Felipe Balbi <balbi@ti.com>
+Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
+Signed-off-by: Paul Walmsley <paul@pwsan.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
++++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+@@ -1669,7 +1669,7 @@ static struct omap_hwmod dra7xx_uart3_hw
+ .class = &dra7xx_uart_hwmod_class,
+ .clkdm_name = "l4per_clkdm",
+ .main_clk = "uart3_gfclk_mux",
+- .flags = HWMOD_SWSUP_SIDLE_ACT,
++ .flags = HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP4UART3_FLAGS,
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4PER_UART3_CLKCTRL_OFFSET,
--- /dev/null
+From 67fd14b3eca63b14429350e9eadc5fab709a8821 Mon Sep 17 00:00:00 2001
+From: Robert Nelson <robertcnelson@gmail.com>
+Date: Tue, 24 Feb 2015 10:10:43 -0600
+Subject: ARM: dts: am335x-bone*: usb0 is hardwired for peripheral
+
+From: Robert Nelson <robertcnelson@gmail.com>
+
+commit 67fd14b3eca63b14429350e9eadc5fab709a8821 upstream.
+
+Fixes: http://bugs.elinux.org/issues/127
+
+the bb.org community was seeing random reboots before this change.
+
+Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
+Reviewed-by: Felipe Balbi <balbi@ti.com>
+Acked-by: Felipe Balbi <balbi@ti.com>
+Signed-off-by: Tony Lindgren <tony@atomide.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ arch/arm/boot/dts/am335x-bone-common.dtsi | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
++++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
+@@ -178,6 +178,7 @@
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
++ dr_mode = "peripheral";
+ };
+
+ &usb {
--- /dev/null
+From de47699d005996b41cea590c6098078ac12058be Mon Sep 17 00:00:00 2001
+From: Dmitry Osipenko <digetx@gmail.com>
+Date: Fri, 12 Dec 2014 18:19:19 +0300
+Subject: ARM: dts: tegra20: fix GR3D, DSI unit and reg base addresses
+
+From: Dmitry Osipenko <digetx@gmail.com>
+
+commit de47699d005996b41cea590c6098078ac12058be upstream.
+
+Commit 58ecb23f64ee ("ARM: tegra: add missing unit addresses to DT") added
+unit address and changed reg base for GR3D and DSI host1x modules, but these
+addresses belongs to GR2D and TVO modules respectively. Fix it by changing
+modules unit and reg base addresses to proper ones.
+
+Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
+Fixes: 58ecb23f64ee (ARM: tegra: add missing unit addresses to DT)
+Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
+Signed-off-by: Thierry Reding <treding@nvidia.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ arch/arm/boot/dts/tegra20.dtsi | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/boot/dts/tegra20.dtsi
++++ b/arch/arm/boot/dts/tegra20.dtsi
+@@ -76,9 +76,9 @@
+ reset-names = "2d";
+ };
+
+- gr3d@54140000 {
++ gr3d@54180000 {
+ compatible = "nvidia,tegra20-gr3d";
+- reg = <0x54140000 0x00040000>;
++ reg = <0x54180000 0x00040000>;
+ clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+ resets = <&tegra_car 24>;
+ reset-names = "3d";
+@@ -138,9 +138,9 @@
+ status = "disabled";
+ };
+
+- dsi@542c0000 {
++ dsi@54300000 {
+ compatible = "nvidia,tegra20-dsi";
+- reg = <0x542c0000 0x00040000>;
++ reg = <0x54300000 0x00040000>;
+ clocks = <&tegra_car TEGRA20_CLK_DSI>;
+ resets = <&tegra_car 48>;
+ reset-names = "dsi";
nfs-don-t-call-blocking-operations-while-task_running.patch
mips-kvm-deliver-guest-interrupts-after-local_irq_disable.patch
mm-hugetlb-pmd_huge-returns-true-for-non-present-hugepage.patch
+tracing-fix-unmapping-loop-in-tracing_mark_write.patch
+arm-8284-1-sa1100-clear-rcsr_smr-on-resume.patch
+arm-dra7-hwmod-fix-boot-crash-with-debug_ll-enabled-on-uart3.patch
+arm-dts-tegra20-fix-gr3d-dsi-unit-and-reg-base-addresses.patch
+arm-dts-am335x-bone-usb0-is-hardwired-for-peripheral.patch
+tpm_tis-verify-interrupt-during-init.patch
--- /dev/null
+From 448e9c55c12d6bd4fa90a7e31d802e045666d7c8 Mon Sep 17 00:00:00 2001
+From: Scot Doyle <lkml14@scotdoyle.com>
+Date: Wed, 24 Sep 2014 22:41:10 +0000
+Subject: tpm_tis: verify interrupt during init
+
+From: Scot Doyle <lkml14@scotdoyle.com>
+
+commit 448e9c55c12d6bd4fa90a7e31d802e045666d7c8 upstream.
+
+Some machines, such as the Acer C720 and Toshiba CB35, have TPMs that do
+not send IRQs while also having an ACPI TPM entry indicating that they
+will be sent. These machines freeze on resume while the tpm_tis module
+waits for an IRQ, eventually timing out.
+
+When in interrupt mode, the tpm_tis module should receive an IRQ during
+module init. Fall back to polling mode if none is received when expected.
+
+Signed-off-by: Scot Doyle <lkml14@scotdoyle.com>
+Tested-by: Michael Mullin <masmullin@gmail.com>
+Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
+[phuewe: minor checkpatch fixed]
+Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/char/tpm/tpm_tis.c | 76 ++++++++++++++++++++++++++++++++++++---------
+ 1 file changed, 62 insertions(+), 14 deletions(-)
+
+--- a/drivers/char/tpm/tpm_tis.c
++++ b/drivers/char/tpm/tpm_tis.c
+@@ -75,6 +75,10 @@ enum tis_defaults {
+ #define TPM_DID_VID(l) (0x0F00 | ((l) << 12))
+ #define TPM_RID(l) (0x0F04 | ((l) << 12))
+
++struct priv_data {
++ bool irq_tested;
++};
++
+ static LIST_HEAD(tis_chips);
+ static DEFINE_MUTEX(tis_lock);
+
+@@ -338,12 +342,27 @@ out_err:
+ return rc;
+ }
+
++static void disable_interrupts(struct tpm_chip *chip)
++{
++ u32 intmask;
++
++ intmask =
++ ioread32(chip->vendor.iobase +
++ TPM_INT_ENABLE(chip->vendor.locality));
++ intmask &= ~TPM_GLOBAL_INT_ENABLE;
++ iowrite32(intmask,
++ chip->vendor.iobase +
++ TPM_INT_ENABLE(chip->vendor.locality));
++ free_irq(chip->vendor.irq, chip);
++ chip->vendor.irq = 0;
++}
++
+ /*
+ * If interrupts are used (signaled by an irq set in the vendor structure)
+ * tpm.c can skip polling for the data to be available as the interrupt is
+ * waited for here
+ */
+-static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
++static int tpm_tis_send_main(struct tpm_chip *chip, u8 *buf, size_t len)
+ {
+ int rc;
+ u32 ordinal;
+@@ -373,6 +392,30 @@ out_err:
+ return rc;
+ }
+
++static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
++{
++ int rc, irq;
++ struct priv_data *priv = chip->vendor.priv;
++
++ if (!chip->vendor.irq || priv->irq_tested)
++ return tpm_tis_send_main(chip, buf, len);
++
++ /* Verify receipt of the expected IRQ */
++ irq = chip->vendor.irq;
++ chip->vendor.irq = 0;
++ rc = tpm_tis_send_main(chip, buf, len);
++ chip->vendor.irq = irq;
++ if (!priv->irq_tested)
++ msleep(1);
++ if (!priv->irq_tested) {
++ disable_interrupts(chip);
++ dev_err(chip->dev,
++ FW_BUG "TPM interrupt not working, polling instead\n");
++ }
++ priv->irq_tested = true;
++ return rc;
++}
++
+ struct tis_vendor_timeout_override {
+ u32 did_vid;
+ unsigned long timeout_us[4];
+@@ -505,6 +548,7 @@ static irqreturn_t tis_int_handler(int d
+ if (interrupt == 0)
+ return IRQ_NONE;
+
++ ((struct priv_data *)chip->vendor.priv)->irq_tested = true;
+ if (interrupt & TPM_INTF_DATA_AVAIL_INT)
+ wake_up_interruptible(&chip->vendor.read_queue);
+ if (interrupt & TPM_INTF_LOCALITY_CHANGE_INT)
+@@ -534,9 +578,14 @@ static int tpm_tis_init(struct device *d
+ u32 vendor, intfcaps, intmask;
+ int rc, i, irq_s, irq_e, probe;
+ struct tpm_chip *chip;
++ struct priv_data *priv;
+
++ priv = devm_kzalloc(dev, sizeof(struct priv_data), GFP_KERNEL);
++ if (priv == NULL)
++ return -ENOMEM;
+ if (!(chip = tpm_register_hardware(dev, &tpm_tis)))
+ return -ENODEV;
++ chip->vendor.priv = priv;
+
+ chip->vendor.iobase = ioremap(start, len);
+ if (!chip->vendor.iobase) {
+@@ -605,19 +654,6 @@ static int tpm_tis_init(struct device *d
+ if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
+ dev_dbg(dev, "\tData Avail Int Support\n");
+
+- /* get the timeouts before testing for irqs */
+- if (tpm_get_timeouts(chip)) {
+- dev_err(dev, "Could not get TPM timeouts and durations\n");
+- rc = -ENODEV;
+- goto out_err;
+- }
+-
+- if (tpm_do_selftest(chip)) {
+- dev_err(dev, "TPM self test failed\n");
+- rc = -ENODEV;
+- goto out_err;
+- }
+-
+ /* INTERRUPT Setup */
+ init_waitqueue_head(&chip->vendor.read_queue);
+ init_waitqueue_head(&chip->vendor.int_queue);
+@@ -719,6 +755,18 @@ static int tpm_tis_init(struct device *d
+ }
+ }
+
++ if (tpm_get_timeouts(chip)) {
++ dev_err(dev, "Could not get TPM timeouts and durations\n");
++ rc = -ENODEV;
++ goto out_err;
++ }
++
++ if (tpm_do_selftest(chip)) {
++ dev_err(dev, "TPM self test failed\n");
++ rc = -ENODEV;
++ goto out_err;
++ }
++
+ INIT_LIST_HEAD(&chip->vendor.list);
+ mutex_lock(&tis_lock);
+ list_add(&chip->vendor.list, &tis_chips);
--- /dev/null
+From 7215853e985a4bef1a6c14e00e89dfec84f1e457 Mon Sep 17 00:00:00 2001
+From: Vikram Mulukutla <markivx@codeaurora.org>
+Date: Wed, 17 Dec 2014 18:50:56 -0800
+Subject: tracing: Fix unmapping loop in tracing_mark_write
+
+From: Vikram Mulukutla <markivx@codeaurora.org>
+
+commit 7215853e985a4bef1a6c14e00e89dfec84f1e457 upstream.
+
+Commit 6edb2a8a385f0cdef51dae37ff23e74d76d8a6ce introduced
+an array map_pages that contains the addresses returned by
+kmap_atomic. However, when unmapping those pages, map_pages[0]
+is unmapped before map_pages[1], breaking the nesting requirement
+as specified in the documentation for kmap_atomic/kunmap_atomic.
+
+This was caught by the highmem debug code present in kunmap_atomic.
+Fix the loop to do the unmapping properly.
+
+Link: http://lkml.kernel.org/r/1418871056-6614-1-git-send-email-markivx@codeaurora.org
+
+Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
+Reported-by: Lime Yang <limey@codeaurora.org>
+Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
+Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ kernel/trace/trace.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/kernel/trace/trace.c
++++ b/kernel/trace/trace.c
+@@ -4694,7 +4694,7 @@ tracing_mark_write(struct file *filp, co
+ *fpos += written;
+
+ out_unlock:
+- for (i = 0; i < nr_pages; i++){
++ for (i = nr_pages - 1; i >= 0; i--) {
+ kunmap_atomic(map_page[i]);
+ put_page(pages[i]);
+ }
projects / thirdparty / kernel / stable-queue.git / commitdiff
