ARM: dts: qcom: motorola-falcon: add accelerometer, magnetometer

Add the accelerometer and magnetometer that are present on the Motorola
Moto G (2013) device.

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/ZmWMh6fuLasvGkR/@standask-GA-A55M-S2HP
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
index 029e1b1659c938047bae89ee6120539b33a1c16e..5dbca83f22309776e63b1b1f158a335def03461f 100644 (file)
--- a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
+++ b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
@@ -96,6 +96,35 @@
        };
 };
 
+&blsp1_i2c2 {
+       status = "okay";
+
+       magnetometer@c {
+               compatible = "asahi-kasei,ak8963";
+               reg = <0xc>;
+               interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
+               reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+               vdd-supply = <&pm8226_l19>;
+               vid-supply = <&pm8226_lvs1>;
+               pinctrl-0 = <&mag_int_default &mag_reset_default>;
+               pinctrl-names = "default";
+       };
+
+       accelerometer@19 {
+               compatible = "st,lis3dh-accel";
+               reg = <0x19>;
+               interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
+               vdd-supply = <&pm8226_l19>;
+               vddio-supply = <&pm8226_lvs1>;
+               pinctrl-0 = <&accel_int_default>;
+               pinctrl-names = "default";
+               mount-matrix = "0", "1", "0",
+                              "1", "0", "0",
+                              "0", "0", "-1";
+               st,drdy-int-pin = <1>;
+       };
+};
+
 &blsp1_i2c3 {
        status = "okay";
 
@@ -321,6 +350,30 @@
 };
 
 &tlmm {
+       accel_int_default: accel-int-default-state {
+               pins = "gpio63";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+               output-disable;
+       };
+
+       mag_int_default: mag-int-default-state {
+               pins = "gpio66";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+               output-disable;
+       };
+
+       mag_reset_default: mag-reset-default-state {
+               pins = "gpio62";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+               output-high;
+       };
+
        reg_lcd_default: reg-lcd-default-state {
                pins = "gpio31", "gpio33";
                function = "gpio";