Merge tag 'ti-k3-dt-for-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git...

TI K3 device tree updates for v6.18

Generic fixes and cleanups:
* k3-pinctrl: Fix incorrect macro usage, add missing DeepSleep/drive strength
  macros
* k3: Rename rproc reserved-mem nodes to 'memory@addr' and add labels for
  reserved-memory
* Long time pending major remoteproc firmware refactoring to allow flexibility
  for downstream variants:
  - am62x/am62ax: Move Mailbox/Remoteproc nodes to board-level DTS files
  - am64/am65/j721e/j721s2/j784s4/j742s2/j7200: Move Remoteproc enablement to
    board-level DTS
  - am62a/am62/am62p/j722s: Similarly restructure Mailbox/Remoteproc configs
  - am65/am64: Refactor IPC firmware carveouts/mailboxes into new SoC
    family-specific dtsi files
  - j721e/j721s2/j784s4/j742s2/am62/am62p/am62a/am64/am65/j7200/j722s: Refactor
    IPC firmware configs into new board-independent dtsi files
  - Various boards: Add missing or corrected carveouts/timers/mailbox configs
    for IPC firmware alignment
* Multiple-boards: Bootph-all property added for USB PHYs to support DFU boot.

New Boards/SoM/SiP:
* Variscite VAR-SOM-AM62P SoM and carrier boards
* AM6254atl SiP package and SK

SoC specific changes:
AM62P:
* Update eMMC HS400 STRB tuning value
* Split HS400 support away from J722S due to errata
* Add Variscite VAR-SOM-AM62P SoM and Symphony carrier board support

AM62:
* Remove unused DeepSleep USB1 pin config on SK
* Add CSI2 interrupts property on main CSI2RX
* Enable Mailbox & Remoteproc at board level
* PocketBeagle2 + Verdin variants: Add missing IPC firmware carveouts, enable
  R5F/M4F

AM62A:
* Fix padcfg length in pad configuration registers
* Remove unused DeepSleep USB1 pin config on SK
* Add CSI2 interrupts property
* Add 1.4GHz OPP entry for phyCORE-AM62Ax
* Enable Mailbox & Remoteproc at board level
* Add missing IPC firmware carveouts for PocketBeagle2 and other boards

AM62D2:
* Add Octal SPI NOR flash (OSPI) support for EVM
* Enable USB0/USB1 interface on EVM

AM625:
* Introduce AM6254atl SiP base SoC support
* Add SK-AM6254atl board

AM64:
* Refactor IPC firmware configs into new dtsi
* Enable Remoteproc at board level
* Add PA stats property for PEB-C-010 expansion Ethernet card
* phyCORE SoM + SR SoM/Electra board: Add missing IPC firmware configs

AM65:
* Refactor IPC firmware configs into new dtsi
* Enable Remoteproc at board level

AM69:
* Switch SERDES0 config to PCIe Multilink + USB mode, enabling independent
  PCIe1 & PCIe3 link speeds

J7200:
* Refactor IPC firmware configs into new dtsi
* Enable R5F Remoteproc at board level

J721E:
* Add DSI + DPHY-TX nodes
* Add CSI2 interrupts property
* BeagleBone AI64: Switch R5 clusters to split mode, add timer reserves for
  IPC FW, Correct carveouts (revert mistaken reordering of C6x carveouts)
* Refactor IPC firmware configs into new dtsi
* Enable Remoteproc at board level

J721S2:
* Add DSI + DSI PHY nodes
* Add USB0 Type-A overlay for EVM
* Add CSI2 interrupts property
* Ensure PCIe node has proper interrupt-controller #address-cells
  fixes dtbs_check warning.
* Refactor IPC firmware configs into new dtsi
* Enable Remoteproc at board level
* Common processor board: Add DisplayPort-1 enable, I2C4 instance for
  display connector

J722S:
* Add bootph-all to usb0_phy_ctrl node (DFU)
* Add JPEG Encoder node (E5010)
* Add CSI2 interrupts properties on main/J722S/AM62P common main
* Refactor IPC firmware configs into new dtsi
* Enable Remoteproc at board level

J784S4/J742S2:
* Add CSI2 interrupts properties on main-common
* Add DSI & PHY support
* Enable DisplayPort-1 on EVM
* Refactor IPC firmware configs into new dtsi (common & SoC-specific)
* Enable Remoteproc at board level
* J742S2: Override MCU R5 firmware names in dedicated dtsi

Board specific changes:
AM62P Variscite Symphony Board:
* Add support with USB, Eth, Camera, CAN, GPIO expander

AM642-phyBOARD-Electra
* Add PEB-C-010 Ethernet expansion board overlay
* Add PA stats handle

AM642-sr/phyCORE
* Add missing IPC carveouts for R5F/M4F

AM62-Verdin/AM62P-Verdin
* Add missing IPC carveouts for R5F/M4F, mailboxes

* tag 'ti-k3-dt-for-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (78 commits)
  arm64: dts: ti: k3-j721s2-evm: Add overlay to enable USB0 Type-A
  arm64: dts: ti: k3-am642-phyboard-electra: Add PEB-C-010 Overlay
  arm64: dts: ti: var-som-am62p: Add support for Variscite Symphony Board
  arm64: dts: ti: Add support for Variscite VAR-SOM-AM62P
  dt-bindings: arm: ti: Add bindings for Variscite VAR-SOM-AM62P
  arm64: dts: ti: k3-j722s-evm: Add bootph-all tag to usb0_phy_ctrl node
  arm64: dts: ti: k3-am62x-sk-common: Add bootph-all tag to usb0_phy_ctrl node
  arm64: dts: ti: k3-am62p5-sk: Add bootph-all tag to usb0_phy_ctrl node
  arm64: dts: ti: k3-am62a7-sk: Add bootph-all tag to usb0_phy_ctrl node
  arm64: dts: ti: k3-j721e-main: Add DSI and DPHY-TX
  arm64: dts: ti: k3-pinctrl: Fix the bug in existing macros
  arm64: dts: ti: k3-pinctrl: Add the remaining macros
  arm64: dts: ti: k3-am62x-sk-common: Remove the unused cfg in USB1_DRVVBUS
  arm64: dts: ti: k3-am62p5-sk: Remove the unused cfg in USB1_DRVVBUS
  arm64: dts: ti: k3-am62d2-evm: Add support for OSPI flash
  arm64: dts: ti: k3-am62d2-evm: Enable USB support
  arm64: dts: ti: k3-am62a-main: Fix main padcfg length
  arm64: dts: ti: k3-am62p: Update eMMC HS400 STRB value
  arm64: dts: ti: k3-am62p/j722s: Remove HS400 support from common
  arm64: dts: ti: Add support for AM6254atl SiP SK
  ...

Link: https://lore.kernel.org/r/20250916175349.pxg6gxd4vg5vfmhx@overvalue
Signed-off-by: Arnd Bergmann <arnd@arndb.de>