mips: dts: realtek: Add SPI NAND controller

Add the SPI-NAND controller on the RTL9300 family of devices. This
supports serial/dual/quad data width and DMA for read/program
operations.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

diff --git a/arch/mips/boot/dts/realtek/rtl930x.dtsi b/arch/mips/boot/dts/realtek/rtl930x.dtsi
index 6a6f3f3fe389baf11e33c304ccb73693856a3cd5..17577457d15986582f6955e1e5545f009a155df2 100644 (file)
--- a/arch/mips/boot/dts/realtek/rtl930x.dtsi
+++ b/arch/mips/boot/dts/realtek/rtl930x.dtsi
@@ -61,6 +61,8 @@
 };
 
 &soc {
+       ranges = <0x0 0x18000000 0x20000>;
+
        intc: interrupt-controller@3000 {
                compatible = "realtek,rtl9300-intc", "realtek,rtl-intc";
                reg = <0x3000 0x18>, <0x3018 0x18>;
@@ -88,6 +90,17 @@
                interrupts = <7>, <8>, <9>, <10>, <11>;
                clocks = <&lx_clk>;
        };
+
+       snand: spi@1a400 {
+               compatible = "realtek,rtl9301-snand";
+               reg = <0x1a400 0x44>;
+               interrupt-parent = <&intc>;
+               interrupts = <19>;
+               clocks = <&lx_clk>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               status = "disabled";
+       };
 };
 
 &uart0 {