Revert "hw/char/pl011: Warn when using disabled receiver"

The guest does not control whether characters are sent on the UART.
Sending them before the guest happens to boot will now result in a
"guest error" log entry that is only because of timing, even if the
guest _would_ later setup the receiver correctly.

This reverts the bulk of commit abf2b6a028670bd2890bb3aee7e103fe53e4b0df,
and instead adds a comment about why we don't check the enable bits.

Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20250311153717.206129-1-pbonzini@redhat.com
[PMM: expanded comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

diff --git a/hw/char/pl011.c b/hw/char/pl011.c
index 23a9db8c57cb110d193c6fc353be3f91482c82cf..0e9ec1301d3fdcf56687fe6765e9f3bf4338023e 100644 (file)
--- a/hw/char/pl011.c
+++ b/hw/char/pl011.c
@@ -490,16 +490,17 @@ static int pl011_can_receive(void *opaque)
     unsigned fifo_depth = pl011_get_fifo_depth(s);
     unsigned fifo_available = fifo_depth - s->read_count;
 
-    if (!(s->cr & CR_UARTEN)) {
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "PL011 receiving data on disabled UART\n");
-    }
-    if (!(s->cr & CR_RXE)) {
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "PL011 receiving data on disabled RX UART\n");
-    }
-    trace_pl011_can_receive(s->lcr, s->read_count, fifo_depth, fifo_available);
+    /*
+     * In theory we should check the UART and RX enable bits here and
+     * return 0 if they are not set (so the guest can't receive data
+     * until you have enabled the UART). In practice we suspect there
+     * is at least some guest code out there which has been tested only
+     * on QEMU and which never bothers to enable the UART because we
+     * historically never enforced that. So we effectively keep the
+     * UART continuously enabled regardless of the enable bits.
+     */
 
+    trace_pl011_can_receive(s->lcr, s->read_count, fifo_depth, fifo_available);
     return fifo_available;
 }