and the process to which the PID belongs is unrelated to Kea. In such a
case it would be necessary to manually delete the PID file.
</para>
-
-
</section> <!-- end start-stop -->
+
<section xml:id="d2-configuration"><info><title>Configuring the DHCP-DDNS Server</title></info>
<para>
- Before starting <command>kea-dhcp-ddns</command> module for the
- first time, a configuration file needs to be created. The following default
- configuration is a template that can be customised to your requirements.
+ Before starting <command>kea-dhcp-ddns</command> module for the
+ first time, a configuration file needs to be created. The following default
+ configuration is a template that can be customised to your requirements.
<screen>
<userinput>"DhcpDdns": {
"ip-address": "127.0.0.1",
"ncr-format": "JSON",
"tsig-keys": [ ],
"forward-ddns": {
- "ddns-domains": [ ]
+ "ddns-domains": [ ]
},
"reverse-ddns": {
- "ddns-domains": [ ]
+ "ddns-domains": [ ]
}
}</userinput>
</screen>
The configuration can be divided as follows, each of which is described
in its own section:
</para>
- <itemizedlist>
- <listitem>
- <simpara>
+ <itemizedlist>
+ <listitem>
+ <simpara>
<emphasis>Global Server Parameters</emphasis> - values which control connectivity and global server behavior
- </simpara>
- </listitem>
- <listitem>
- <simpara>
- <emphasis>TSIG Key Info</emphasis> - defines the TSIG keys used for secure traffic with DNS servers
- </simpara>
- </listitem>
- <listitem>
- <simpara>
- <emphasis>Forward DDNS</emphasis> - defines the catalog of Forward DDNS Domains
- </simpara>
- </listitem>
- <listitem>
- <simpara>
- <emphasis>Reverse DDNS</emphasis> - defines the catalog of Forward DDNS Domains
- </simpara>
- </listitem>
- </itemizedlist>
+ </simpara>
+ </listitem>
+ <listitem>
+ <simpara>
+ <emphasis>TSIG Key Info</emphasis> - defines the TSIG keys used for secure traffic with DNS servers
+ </simpara>
+ </listitem>
+ <listitem>
+ <simpara>
+ <emphasis>Forward DDNS</emphasis> - defines the catalog of Forward DDNS Domains
+ </simpara>
+ </listitem>
+ <listitem>
+ <simpara>
+ <emphasis>Reverse DDNS</emphasis> - defines the catalog of Forward DDNS Domains
+ </simpara>
+ </listitem>
+ </itemizedlist>
+
<section xml:id="d2-server-parameter-config"><info><title>Global Server Parameters</title></info>
<itemizedlist>
-
<listitem><simpara>
<command>ip-address</command> - IP address on which D2
listens for requests. The default is the local loopback interface at
</simpara></listitem>
</itemizedlist>
- D2 must listen for change requests on a known address and port. By
- default it listens at 127.0.0.1 on port 53001. The following example
- illustrates how to change D2's global parameters so it will listen
- at 192.168.1.10 port 900:
+ <para>
+ D2 must listen for change requests on a known address and port. By
+ default it listens at 127.0.0.1 on port 53001. The following example
+ illustrates how to change D2's global parameters so it will listen
+ at 192.168.1.10 port 900:
<screen>
"DhcpDdns": {
<userinput>"ip-address": "192.168.1.10",
...
}
}</screen>
- </para>
- <warning>
- <simpara>
- It is possible for a malicious attacker to send bogus
- NameChangeRequests to the DHCP-DDNS server. Addresses
- other than the IPv4 or IPv6 loopback addresses (127.0.0.1
- or ::1) should only be used for testing purposes, but
- note that local users may still communicate with the
- DHCP-DDNS server. A future version of Kea will implement
- authentication to guard against such attacks.
- </simpara>
+ </para>
+ <warning>
+ <simpara>
+ It is possible for a malicious attacker to send bogus
+ NameChangeRequests to the DHCP-DDNS server. Addresses
+ other than the IPv4 or IPv6 loopback addresses (127.0.0.1
+ or ::1) should only be used for testing purposes, but
+ note that local users may still communicate with the
+ DHCP-DDNS server. A future version of Kea will implement
+ authentication to guard against such attacks.
+ </simpara>
<!-- see ticket #3514 -->
- </warning>
+ </warning>
<note>
<simpara>
If the ip-address and port are changed, it will be necessary to change the
</section> <!-- "d2-server-parameter-config" -->
<section xml:id="d2-tsig-key-list-config"><info><title>TSIG Key List</title></info>
- A DDNS protocol exchange can be conducted with or without TSIG
- (defined in <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://tools.ietf/org/html/rfc2845">RFC
- 2845</link>). This configuration section allows the administrator
- to define the set of TSIG keys that may be used in such
- exchanges.</para>
-
-
<para>To use TSIG when updating entries in a DNS Domain,
- a key must be defined in the TSIG Key List and referenced by
- name in that domain's configuration entry. When D2 matches a
- change request to a domain, it checks whether the domain has
- a TSIG key associated with it. If so, D2 will use that key to
- sign DNS update messages sent to and verify responses received
- from the domain's DNS server(s). For each TSIG key required by
- the DNS servers that D2 will be working with there must be a
- corresponding TSIG key in the TSIG Key list.</para>
-
- As one might gather from the name, the tsig-key section of the
- D2 configuration lists the TSIG keys. Each entry describes a
- TSIG key used by one or more DNS servers to authenticate requests
- and sign responses. Every entry in the list has three parameters:
- <itemizedlist>
- <listitem>
- <simpara>
- <command>name</command> -
- a unique text label used to identify this key within the
- list. This value is used to specify which key (if any) should be
- used when updating a specific domain. So long as it is unique its
- content is arbitrary, although for clarity and ease of maintenance
- it is recommended that it match the name used on the DNS server(s).
- It cannot be blank.
- </simpara>
- </listitem>
- <listitem>
- <simpara>
- <command>algorithm</command> -
- specifies which hashing algorithm should be used with this
- key. This value must specify the same algorithm used for the
- key on the DNS server(s). The supported algorithms are listed below:
- <itemizedlist>
- <listitem>
- <command>HMAC-MD5</command>
- </listitem>
- <listitem>
- <command>HMAC-SHA1</command>
- </listitem>
- <listitem>
- <command>HMAC-SHA224</command>
- </listitem>
- <listitem>
- <command>HMAC-SHA256</command>
- </listitem>
- <listitem>
- <command>HMAC-SHA384</command>
- </listitem>
- <listitem>
- <command>HMAC-SHA512</command>
- </listitem>
- </itemizedlist>
- This value is not case sensitive.
- </simpara>
- </listitem>
- <listitem>
- <simpara>
- <command>digest-bits</command> -
- is used to specify the minimum truncated length in bits.
- The default value 0 means truncation is forbidden, non-zero
- values must be an integral number of octets, be greater
- than 80 and the half of the full length. Note in BIND9
- this parameter is appended after a dash to the algorithm
- name.
- </simpara>
- </listitem>
- <listitem>
- <simpara>
- <command>secret</command> -
- is used to specify the shared secret key code for this key. This value is
- case sensitive and must exactly match the value specified on the DNS server(s).
- It is a base64-encoded text value.
- </simpara>
- </listitem>
- </itemizedlist>
- </para>
- As an example, suppose that a domain D2 will be updating is
- maintained by a BIND9 DNS server which requires dynamic updates
- to be secured with TSIG. Suppose further that the entry for
- the TSIG key in BIND9's named.conf file looks like this:
+ <para>
+ A DDNS protocol exchange can be conducted with or without TSIG
+ (defined in <link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://tools.ietf/org/html/rfc2845">RFC
+ 2845</link>). This configuration section allows the administrator
+ to define the set of TSIG keys that may be used in such
+ exchanges.</para>
+
+ <para>To use TSIG when updating entries in a DNS Domain,
+ a key must be defined in the TSIG Key List and referenced by
+ name in that domain's configuration entry. When D2 matches a
+ change request to a domain, it checks whether the domain has
+ a TSIG key associated with it. If so, D2 will use that key to
+ sign DNS update messages sent to and verify responses received
+ from the domain's DNS server(s). For each TSIG key required by
+ the DNS servers that D2 will be working with there must be a
+ corresponding TSIG key in the TSIG Key list.</para>
+
+ <para>
+ As one might gather from the name, the tsig-key section of the
+ D2 configuration lists the TSIG keys. Each entry describes a
+ TSIG key used by one or more DNS servers to authenticate requests
+ and sign responses. Every entry in the list has three parameters:
+ <itemizedlist>
+ <listitem>
+ <simpara>
+ <command>name</command> -
+ a unique text label used to identify this key within the
+ list. This value is used to specify which key (if any) should be
+ used when updating a specific domain. So long as it is unique its
+ content is arbitrary, although for clarity and ease of maintenance
+ it is recommended that it match the name used on the DNS server(s).
+ It cannot be blank.
+ </simpara>
+ </listitem>
+ <listitem>
+ <simpara>
+ <command>algorithm</command> -
+ specifies which hashing algorithm should be used with this
+ key. This value must specify the same algorithm used for the
+ key on the DNS server(s). The supported algorithms are listed below:
+ <itemizedlist>
+ <listitem>
+ <command>HMAC-MD5</command>
+ </listitem>
+ <listitem>
+ <command>HMAC-SHA1</command>
+ </listitem>
+ <listitem>
+ <command>HMAC-SHA224</command>
+ </listitem>
+ <listitem>
+ <command>HMAC-SHA256</command>
+ </listitem>
+ <listitem>
+ <command>HMAC-SHA384</command>
+ </listitem>
+ <listitem>
+ <command>HMAC-SHA512</command>
+ </listitem>
+ </itemizedlist>
+ This value is not case sensitive.
+ </simpara>
+ </listitem>
+ <listitem>
+ <simpara>
+ <command>digest-bits</command> -
+ is used to specify the minimum truncated length in bits.
+ The default value 0 means truncation is forbidden, non-zero
+ values must be an integral number of octets, be greater
+ than 80 and the half of the full length. Note in BIND9
+ this parameter is appended after a dash to the algorithm
+ name.
+ </simpara>
+ </listitem>
+ <listitem>
+ <simpara>
+ <command>secret</command> -
+ is used to specify the shared secret key code for this key. This value is
+ case sensitive and must exactly match the value specified on the DNS server(s).
+ It is a base64-encoded text value.
+ </simpara>
+ </listitem>
+ </itemizedlist>
+ </para>
+ <para>
+ As an example, suppose that a domain D2 will be updating is
+ maintained by a BIND9 DNS server which requires dynamic updates
+ to be secured with TSIG. Suppose further that the entry for
+ the TSIG key in BIND9's named.conf file looks like this:
<screen>
:
key "key.four.example.com." {
};
:
</screen>
- By default, the TSIG Key list is empty:
+ By default, the TSIG Key list is empty:
<screen>
"DhcpDdns": {
<userinput>"tsig-keys": [ ]</userinput>,
}
</screen>
- We must extend the list with a new key:
+ We must extend the list with a new key:
<screen>
"DhcpDdns": {
"tsig-keys": [
<userinput> {
- "name": "key.four.example.com.",
- "algorithm": "HMAC-SHA224",
- "secret": "bZEG7Ow8OgAUPfLWV3aAUQ=="
- }</userinput>
+ "name": "key.four.example.com.",
+ "algorithm": "HMAC-SHA224",
+ "secret": "bZEG7Ow8OgAUPfLWV3aAUQ=="
+ }</userinput>
],
...
}
</screen>
- </para>
+ </para>
-
<para>These steps would be repeated for each TSIG key needed. Note that
- the same TSIG key can be used with more than one domain.</para>
+ <para>These steps would be repeated for each TSIG key needed. Note that
+ the same TSIG key can be used with more than one domain.</para>
</section>
- <!-- "d2-tsig-key-list-config" -->
+ <!-- "d2-tsig-key-list-config" -->
<section xml:id="d2-forward-ddns-config"><info><title>Forward DDNS</title></info>
- The Forward DDNS section is used to configure D2's forward update
- behavior. Currently it contains a single parameter, the catalog of
- forward DDNS Domains, which is a list of structures.
+ <para>
+ The Forward DDNS section is used to configure D2's forward update
+ behavior. Currently it contains a single parameter, the catalog of
+ forward DDNS Domains, which is a list of structures.
<screen>
"DhcpDdns": {
<userinput>"forward-ddns": {
- "ddns-domains": [ ]
+ "ddns-domains": [ ]
}</userinput>,
...
}
</screen>
- By default, this list is empty, which will cause the server to ignore
- the forward update portions of requests.
- </para>
- <section xml:id="add-forward-ddns-domain"><info><title>Adding Forward DDNS Domains</title></info>
- <para>
- A forward DDNS Domain maps a forward DNS zone to a set of
- DNS servers which maintain the forward DNS data (i.e. name to
- address mapping) for that zone. You will need one forward DDNS
- Domain for each zone you wish to service. It may very well
- be that some or all of your zones are maintained by the same
- servers. You will still need one DDNS Domain per zone. Remember
- that matching a request to the appropriate server(s) is done
- by zone and a DDNS Domain only defines a single zone.
- </para>
- <para>
- This section describes how to add Forward DDNS Domains. Repeat these
- steps for each Forward DDNS Domain desired. Each Forward DDNS Domain
- has the following parameters:
- <itemizedlist>
- <listitem>
- <simpara>
- <command>name</command> -
- The fully qualified domain name (or zone) that this DDNS Domain
- can update. This is value used to compare against the request
- FQDN during forward matching. It must be unique within the
- catalog.
- </simpara>
- </listitem>
- <listitem>
- <simpara>
- <command>key-name</command> -
- If TSIG is used with this domain's servers, this
- value should be the name of the key from within the TSIG Key List
- to use. If the value is blank (the default), TSIG will not be
- used in DDNS conversations with this domain's servers.
- </simpara>
- </listitem>
- <listitem>
- <simpara>
- <command>dns-servers</command> -
- A list of one or more DNS servers which can conduct the server
- side of the DDNS protocol for this domain. The servers
- are used in a first to last preference. In other words, when D2
- begins to process a request for this domain it will pick the
- first server in this list and attempt to communicate with it.
- If that attempt fails, it will move to next one in the list and
- so on until the it achieves success or the list is exhausted.
- </simpara>
- </listitem>
- </itemizedlist>
- To create a new forward DDNS Domain, one must add a new domain
- element and set its parameters:
+ By default, this list is empty, which will cause the server to ignore
+ the forward update portions of requests.
+ </para>
+
+ <section xml:id="add-forward-ddns-domain"><info><title>Adding Forward DDNS Domains</title></info>
+ <para>
+ A forward DDNS Domain maps a forward DNS zone to a set of
+ DNS servers which maintain the forward DNS data (i.e. name to
+ address mapping) for that zone. You will need one forward DDNS
+ Domain for each zone you wish to service. It may very well
+ be that some or all of your zones are maintained by the same
+ servers. You will still need one DDNS Domain per zone. Remember
+ that matching a request to the appropriate server(s) is done
+ by zone and a DDNS Domain only defines a single zone.
+ </para>
+ <para>
+ This section describes how to add Forward DDNS Domains. Repeat these
+ steps for each Forward DDNS Domain desired. Each Forward DDNS Domain
+ has the following parameters:
+ <itemizedlist>
+ <listitem>
+ <simpara>
+ <command>name</command> -
+ The fully qualified domain name (or zone) that this DDNS Domain
+ can update. This is value used to compare against the request
+ FQDN during forward matching. It must be unique within the
+ catalog.
+ </simpara>
+ </listitem>
+ <listitem>
+ <simpara>
+ <command>key-name</command> -
+ If TSIG is used with this domain's servers, this
+ value should be the name of the key from within the TSIG Key List
+ to use. If the value is blank (the default), TSIG will not be
+ used in DDNS conversations with this domain's servers.
+ </simpara>
+ </listitem>
+ <listitem>
+ <simpara>
+ <command>dns-servers</command> -
+ A list of one or more DNS servers which can conduct the server
+ side of the DDNS protocol for this domain. The servers
+ are used in a first to last preference. In other words, when D2
+ begins to process a request for this domain it will pick the
+ first server in this list and attempt to communicate with it.
+ If that attempt fails, it will move to next one in the list and
+ so on until the it achieves success or the list is exhausted.
+ </simpara>
+ </listitem>
+ </itemizedlist>
+ To create a new forward DDNS Domain, one must add a new domain
+ element and set its parameters:
<screen>
"DhcpDdns": {
"forward-ddns": {
- "ddns-domains": [
- <userinput>{
- "name": "other.example.com.",
- "key-name": "",
- "dns-servers": [
- ]
- }</userinput>
- ]
+ "ddns-domains": [
+ <userinput>{
+ "name": "other.example.com.",
+ "key-name": "",
+ "dns-servers": [
+ ]
+ }</userinput>
+ ]
}
}
</screen>
- It is permissible to add a domain without any servers. If that domain
- should be matched to a request, however, the request will fail. In
- order to make the domain useful though, we must add at least one DNS
- server to it.
- </para>
-
- <section xml:id="add-forward-dns-servers"><info><title>Adding Forward DNS Servers</title></info>
- This section describes how to add DNS servers to a Forward DDNS Domain.
- Repeat them for as many servers as desired for a each domain.
- </para>
- Forward DNS Server entries represent actual DNS servers which
- support the server side of the DDNS protocol. Each Forward DNS Server
- has the following parameters:
- <itemizedlist>
- <listitem>
- <simpara>
- <command>hostname</command> -
- The resolvable host name of the DNS server. This value is not
- yet implemented.
- </simpara>
- </listitem>
- <listitem>
- <simpara>
- <command>ip-address</command> -
- The IP address at which the server listens for DDNS requests.
- This may be either an IPv4 or an IPv6 address.
- </simpara>
- </listitem>
- <listitem>
- <simpara>
- <command>port</command> -
- The port on which the server listens for DDNS requests. It
- defaults to the standard DNS service port of 53.
- </simpara>
- </listitem>
- </itemizedlist>
- To create a new forward DNS Server, one must add a new server
- element to the domain and fill in its parameters. If for
- example the service is running at "172.88.99.10", then set it as
- follows:
+ It is permissible to add a domain without any servers. If that domain
+ should be matched to a request, however, the request will fail. In
+ order to make the domain useful though, we must add at least one DNS
+ server to it.
+ </para>
+
+ <section xml:id="add-forward-dns-servers"><info><title>Adding Forward DNS Servers</title></info>
+ <para>
+ This section describes how to add DNS servers to a Forward DDNS Domain.
+ Repeat them for as many servers as desired for a each domain.
+ </para>
+ <para>
+ Forward DNS Server entries represent actual DNS servers which
+ support the server side of the DDNS protocol. Each Forward DNS Server
+ has the following parameters:
+ <itemizedlist>
+ <listitem>
+ <simpara>
+ <command>hostname</command> -
+ The resolvable host name of the DNS server. This value is not
+ yet implemented.
+ </simpara>
+ </listitem>
+ <listitem>
+ <simpara>
+ <command>ip-address</command> -
+ The IP address at which the server listens for DDNS requests.
+ This may be either an IPv4 or an IPv6 address.
+ </simpara>
+ </listitem>
+ <listitem>
+ <simpara>
+ <command>port</command> -
+ The port on which the server listens for DDNS requests. It
+ defaults to the standard DNS service port of 53.
+ </simpara>
+ </listitem>
+ </itemizedlist>
+ To create a new forward DNS Server, one must add a new server
+ element to the domain and fill in its parameters. If for
+ example the service is running at "172.88.99.10", then set it as
+ follows:
<screen>
"DhcpDdns": {
"forward-ddns": {
- "ddns-domains": [
- {
- "name": "other.example.com.",
- "key-name": "",
- "dns-servers": [
- <userinput>{
- "hostname": "",
- "ip-address": "172.88.99.10",
- "port": 53
- }</userinput>
- ]
- }
- ]
+ "ddns-domains": [
+ {
+ "name": "other.example.com.",
+ "key-name": "",
+ "dns-servers": [
+ <userinput>{
+ "hostname": "",
+ "ip-address": "172.88.99.10",
+ "port": 53
+ }</userinput>
+ ]
+ }
+ ]
}
}
</screen>
- </para>
+ </para>
<note><simpara>
- As stated earlier, "hostname" is not yet supported so, the parameter
- "ip-address" must be set to the address of the DNS server.
+ As stated earlier, "hostname" is not yet supported so, the parameter
+ "ip-address" must be set to the address of the DNS server.
</simpara></note>
- </section> <!-- "add-forward-dns-servers" -->
+ </section> <!-- "add-forward-dns-servers" -->
</section> <!-- "add-forward-ddns-domains" -->
</section> <!-- "d2-forward-ddns-config" -->
<section xml:id="d2-reverse-ddns-config"><info><title>Reverse DDNS</title></info>
- The Reverse DDNS section is used to configure D2's reverse update
- behavior, and the concepts are the same as for the forward DDNS
- section. Currently it contains a single parameter, the catalog of
- reverse DDNS Domains, which is a list of structures.
+ <para>
+ The Reverse DDNS section is used to configure D2's reverse update
+ behavior, and the concepts are the same as for the forward DDNS
+ section. Currently it contains a single parameter, the catalog of
+ reverse DDNS Domains, which is a list of structures.
<screen>
"DhcpDdns": {
<userinput>"reverse-ddns": {
- "ddns-domains": [ ]
+ "ddns-domains": [ ]
}</userinput>
...
}
</screen>
- By default, this list is empty, which will cause the server to ignore
- the reverse update portions of requests.
- </para>
- <section xml:id="add-reverse-ddns-domain"><info><title>Adding Reverse DDNS Domains</title></info>
- <para>
- A reverse DDNS Domain maps a reverse DNS zone to a set of DNS
- servers which maintain the reverse DNS data (address to name
- mapping) for that zone. You will need one reverse DDNS Domain
- for each zone you wish to service. It may very well be that
- some or all of your zones are maintained by the same servers;
- even then, you will still need one DDNS Domain entry for each
- zone. Remember that matching a request to the appropriate
- server(s) is done by zone and a DDNS Domain only defines a
- single zone.
- </para>
- <para>
- This section describes how to add Reverse DDNS Domains. Repeat these
- steps for each Reverse DDNS Domain desired. Each Reverse DDNS Domain
- has the following parameters:
- <itemizedlist>
- <listitem>
- <simpara>
- <command>name</command> -
- The fully qualified reverse zone that this DDNS Domain
- can update. This is the value used during reverse matching
- which will compare it with a reversed version of the request's
- lease address. The zone name should follow the appropriate
- standards: for example, to to support the IPv4 subnet 172.16.1,
- the name should be. "1.16.172.in-addr.arpa.". Similarly,
- to support an IPv6 subnet of 2001:db8:1, the name should be
- "1.0.0.0.8.B.D.0.1.0.0.2.ip6.arpa."
- Whatever the name, it must be unique within the catalog.
- </simpara>
- </listitem>
- <listitem>
- <simpara>
- <command>key-name</command> -
- If TSIG should be used with this domain's servers, then this
- value should be the name of that key from the TSIG Key List.
- If the value is blank (the default), TSIG will not be
- used in DDNS conversations with this domain's servers. Currently
- this value is not used as TSIG has not been implemented.
- </simpara>
- </listitem>
- <listitem>
- <simpara>
- <command>dns-servers</command> -
- a list of one or more DNS servers which can conduct the server
- side of the DDNS protocol for this domain. Currently the servers
- are used in a first to last preference. In other words, when D2
- begins to process a request for this domain it will pick the
- first server in this list and attempt to communicate with it.
- If that attempt fails, it will move to next one in the list and
- so on until the it achieves success or the list is exhausted.
- </simpara>
- </listitem>
- </itemizedlist>
- To create a new reverse DDNS Domain, one must add a new domain element
- and set its parameters. For example, to support subnet 2001:db8:1::,
- the following configuration could be used:
+ By default, this list is empty, which will cause the server to ignore
+ the reverse update portions of requests.
+ </para>
+
+ <section xml:id="add-reverse-ddns-domain"><info><title>Adding Reverse DDNS Domains</title></info>
+ <para>
+ A reverse DDNS Domain maps a reverse DNS zone to a set of DNS
+ servers which maintain the reverse DNS data (address to name
+ mapping) for that zone. You will need one reverse DDNS Domain
+ for each zone you wish to service. It may very well be that
+ some or all of your zones are maintained by the same servers;
+ even then, you will still need one DDNS Domain entry for each
+ zone. Remember that matching a request to the appropriate
+ server(s) is done by zone and a DDNS Domain only defines a
+ single zone.
+ </para>
+ <para>
+ This section describes how to add Reverse DDNS Domains. Repeat these
+ steps for each Reverse DDNS Domain desired. Each Reverse DDNS Domain
+ has the following parameters:
+ <itemizedlist>
+ <listitem>
+ <simpara>
+ <command>name</command> -
+ The fully qualified reverse zone that this DDNS Domain
+ can update. This is the value used during reverse matching
+ which will compare it with a reversed version of the request's
+ lease address. The zone name should follow the appropriate
+ standards: for example, to to support the IPv4 subnet 172.16.1,
+ the name should be. "1.16.172.in-addr.arpa.". Similarly,
+ to support an IPv6 subnet of 2001:db8:1, the name should be
+ "1.0.0.0.8.B.D.0.1.0.0.2.ip6.arpa."
+ Whatever the name, it must be unique within the catalog.
+ </simpara>
+ </listitem>
+ <listitem>
+ <simpara>
+ <command>key-name</command> -
+ If TSIG should be used with this domain's servers, then this
+ value should be the name of that key from the TSIG Key List.
+ If the value is blank (the default), TSIG will not be
+ used in DDNS conversations with this domain's servers. Currently
+ this value is not used as TSIG has not been implemented.
+ </simpara>
+ </listitem>
+ <listitem>
+ <simpara>
+ <command>dns-servers</command> -
+ a list of one or more DNS servers which can conduct the server
+ side of the DDNS protocol for this domain. Currently the servers
+ are used in a first to last preference. In other words, when D2
+ begins to process a request for this domain it will pick the
+ first server in this list and attempt to communicate with it.
+ If that attempt fails, it will move to next one in the list and
+ so on until the it achieves success or the list is exhausted.
+ </simpara>
+ </listitem>
+ </itemizedlist>
+ To create a new reverse DDNS Domain, one must add a new domain element
+ and set its parameters. For example, to support subnet 2001:db8:1::,
+ the following configuration could be used:
<screen>
"DhcpDdns": {
"reverse-ddns": {
- "ddns-domains": [
- <userinput>{
- "name": "1.0.0.0.8.B.D.0.1.0.0.2.ip6.arpa.",
- "key-name": "",
- "dns-servers": [
- ]
- }</userinput>
- ]
+ "ddns-domains": [
+ <userinput>{
+ "name": "1.0.0.0.8.B.D.0.1.0.0.2.ip6.arpa.",
+ "key-name": "",
+ "dns-servers": [
+ ]
+ }</userinput>
+ ]
}
}
</screen>
- It is permissible to add a domain without any servers. If that domain
- should be matched to a request, however, the request will fail. In
- order to make the domain useful though, we must add at least one DNS
- server to it.
- </para>
-
- <section xml:id="add-reverse-dns-servers"><info><title>Adding Reverse DNS Servers</title></info>
- This section describes how to add DNS servers to a Reverse DDNS Domain.
- Repeat them for as many servers as desired for each domain.
- </para>
- Reverse DNS Server entries represents a actual DNS servers which
- support the server side of the DDNS protocol. Each Reverse DNS Server
- has the following parameters:
- <itemizedlist>
- <listitem>
- <simpara>
- <command>hostname</command> -
- The resolvable host name of the DNS server. This value is
- currently ignored.
- </simpara>
- </listitem>
- <listitem>
- <simpara>
- <command>ip-address</command> -
- The IP address at which the server listens for DDNS requests.
- </simpara>
- </listitem>
- <listitem>
- <simpara>
- <command>port</command> -
- The port on which the server listens for DDNS requests. It
- defaults to the standard DNS service port of 53.
- </simpara>
- </listitem>
- </itemizedlist>
- To create a new reverse DNS Server, one must first add a new server
- element to the domain and fill in its parameters. If for
- example the service is running at "172.88.99.10", then set it as
- follows:
+ It is permissible to add a domain without any servers. If that domain
+ should be matched to a request, however, the request will fail. In
+ order to make the domain useful though, we must add at least one DNS
+ server to it.
+ </para>
+
+ <section xml:id="add-reverse-dns-servers"><info><title>Adding Reverse DNS Servers</title></info>
+ <para>
+ This section describes how to add DNS servers to a Reverse DDNS Domain.
+ Repeat them for as many servers as desired for each domain.
+ </para>
+ <para>
+ Reverse DNS Server entries represents a actual DNS servers which
+ support the server side of the DDNS protocol. Each Reverse DNS Server
+ has the following parameters:
+ <itemizedlist>
+ <listitem>
+ <simpara>
+ <command>hostname</command> -
+ The resolvable host name of the DNS server. This value is
+ currently ignored.
+ </simpara>
+ </listitem>
+ <listitem>
+ <simpara>
+ <command>ip-address</command> -
+ The IP address at which the server listens for DDNS requests.
+ </simpara>
+ </listitem>
+ <listitem>
+ <simpara>
+ <command>port</command> -
+ The port on which the server listens for DDNS requests. It
+ defaults to the standard DNS service port of 53.
+ </simpara>
+ </listitem>
+ </itemizedlist>
+ To create a new reverse DNS Server, one must first add a new server
+ element to the domain and fill in its parameters. If for
+ example the service is running at "172.88.99.10", then set it as
+ follows:
<screen>
"DhcpDdns": {
"reverse-ddns": {
- "ddns-domains": [
- {
- "name": "1.0.0.0.8.B.D.0.1.0.0.2.ip6.arpa.",
- "key-name": "",
- "dns-servers": [
- <userinput>{
- "hostname": "",
- "ip-address": "172.88.99.10",
- "port": 53
- }</userinput>
- ]
- }
- ]
+ "ddns-domains": [
+ {
+ "name": "1.0.0.0.8.B.D.0.1.0.0.2.ip6.arpa.",
+ "key-name": "",
+ "dns-servers": [
+ <userinput>{
+ "hostname": "",
+ "ip-address": "172.88.99.10",
+ "port": 53
+ }</userinput>
+ ]
+ }
+ ]
}
}
</screen>
</simpara>
</note>
- </section> <!-- "add-reverse-dns-servers" -->
+ </section> <!-- "add-reverse-dns-servers" -->
</section> <!-- "add-reverse-ddns-domains" -->
</section> <!-- "d2-reverse-ddns-config" -->
<section xml:id="d2-example-config"><info><title>Example DHCP-DDNS Server Configuration</title></info>
- This section provides an example DHCP-DDNS server configuration based
- on a small example network. Let's suppose our example network has
- three domains, each with their own subnet.
-
-
<table><info><title>Our example network</title></info>
- <tgroup cols="4" align="left">
- <colspec colname="domain"/>
- <colspec colname="subnet"/>
- <colspec colname="fservers"/>
- <colspec colname="rservers"/>
- <thead>
- <row>
- <entry>Domain</entry>
- <entry>Subnet</entry>
- <entry>Forward DNS Servers</entry>
- <entry>Reverse DNS Servers</entry>
- </row>
- </thead>
- <tbody>
- <row>
- <entry>four.example.com</entry>
- <entry>192.0.2.0/24</entry>
- <entry>172.16.1.5, 172.16.2.5</entry>
- <entry>172.16.1.5, 172.16.2.5</entry>
- </row>
- <row>
- <entry>six.example.com</entry>
- <entry>2001:db8:1::/64</entry>
- <entry>3001:1::50</entry>
- <entry>3001:1::51</entry>
- </row>
- <row>
- <entry>example.com</entry>
- <entry>192.0.0.0/16</entry>
- <entry>172.16.2.5</entry>
- <entry>172.16.2.5</entry>
- </row>
- </tbody>
- </tgroup>
- </table>
- </para>
- We need to construct three forward DDNS Domains:
-
<table><info><title>Forward DDNS Domains Needed</title></info>
- <tgroup cols="3" align="left">
- <colspec colname="num"/>
- <colspec colname="name"/>
- <colspec colname="servers"/>
- <thead>
- <row>
- <entry>#</entry>
- <entry>DDNS Domain Name</entry>
- <entry>DNS Servers</entry>
- </row>
- </thead>
- <tbody>
- <row>
- <entry>1.</entry>
- <entry>four.example.com.</entry>
- <entry>172.16.1.5, 172.16.2.5</entry>
- </row>
- <row>
- <entry>2.</entry>
- <entry>six.example.com.</entry>
- <entry>3001:1::50</entry>
- </row>
- <row>
- <entry>3.</entry>
- <entry>example.com.</entry>
- <entry>172.16.2.5</entry>
- </row>
- </tbody>
- </tgroup>
- </table>
- As discussed earlier, FQDN to domain matching is based on the longest
- match. The FQDN, "myhost.four.example.com.", will match the first
- domain ("four.example.com") while "admin.example.com." will match the
- third domain ("example.com"). The
- FQDN, "other.example.net." will fail to match any domain and would
- be rejected.
- </para>
- The following example configuration specified the Forward DDNS Domains.
+ <para>
+ This section provides an example DHCP-DDNS server configuration based
+ on a small example network. Let's suppose our example network has
+ three domains, each with their own subnet.
+
+ <table><info><title>Our example network</title></info>
+ <tgroup cols="4" align="left">
+ <colspec colname="domain"/>
+ <colspec colname="subnet"/>
+ <colspec colname="fservers"/>
+ <colspec colname="rservers"/>
+ <thead>
+ <row>
+ <entry>Domain</entry>
+ <entry>Subnet</entry>
+ <entry>Forward DNS Servers</entry>
+ <entry>Reverse DNS Servers</entry>
+ </row>
+ </thead>
+ <tbody>
+ <row>
+ <entry>four.example.com</entry>
+ <entry>192.0.2.0/24</entry>
+ <entry>172.16.1.5, 172.16.2.5</entry>
+ <entry>172.16.1.5, 172.16.2.5</entry>
+ </row>
+ <row>
+ <entry>six.example.com</entry>
+ <entry>2001:db8:1::/64</entry>
+ <entry>3001:1::50</entry>
+ <entry>3001:1::51</entry>
+ </row>
+ <row>
+ <entry>example.com</entry>
+ <entry>192.0.0.0/16</entry>
+ <entry>172.16.2.5</entry>
+ <entry>172.16.2.5</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ </para>
+ <para>
+ We need to construct three forward DDNS Domains:
+ <table><info><title>Forward DDNS Domains Needed</title></info>
+ <tgroup cols="3" align="left">
+ <colspec colname="num"/>
+ <colspec colname="name"/>
+ <colspec colname="servers"/>
+ <thead>
+ <row>
+ <entry>#</entry>
+ <entry>DDNS Domain Name</entry>
+ <entry>DNS Servers</entry>
+ </row>
+ </thead>
+ <tbody>
+ <row>
+ <entry>1.</entry>
+ <entry>four.example.com.</entry>
+ <entry>172.16.1.5, 172.16.2.5</entry>
+ </row>
+ <row>
+ <entry>2.</entry>
+ <entry>six.example.com.</entry>
+ <entry>3001:1::50</entry>
+ </row>
+ <row>
+ <entry>3.</entry>
+ <entry>example.com.</entry>
+ <entry>172.16.2.5</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ As discussed earlier, FQDN to domain matching is based on the longest
+ match. The FQDN, "myhost.four.example.com.", will match the first
+ domain ("four.example.com") while "admin.example.com." will match the
+ third domain ("example.com"). The
+ FQDN, "other.example.net." will fail to match any domain and would
+ be rejected.
+ </para>
+ <para>
+ The following example configuration specified the Forward DDNS Domains.
<screen><userinput>
"DhcpDdns": {
"forward-ddns": {
- "ddns-domains": [
- {
- "name": "four.example.com.",
- "key-name": "",
- "dns-servers": [
- { "ip-address": "172.16.1.5" },
- { "ip-address": "172.16.2.5" }
- ]
- },
- {
- "name": "six.example.com.",
- "key-name": "",
- "dns-servers": [
- { "ip-address": "2001:db8::1" }
- ]
- },
- {
- "name": "example.com.",
- "key-name": "",
- "dns-servers": [
- { "ip-address": "172.16.2.5" }
- ]
- },
-
- ]
+ "ddns-domains": [
+ {
+ "name": "four.example.com.",
+ "key-name": "",
+ "dns-servers": [
+ { "ip-address": "172.16.1.5" },
+ { "ip-address": "172.16.2.5" }
+ ]
+ },
+ {
+ "name": "six.example.com.",
+ "key-name": "",
+ "dns-servers": [
+ { "ip-address": "2001:db8::1" }
+ ]
+ },
+ {
+ "name": "example.com.",
+ "key-name": "",
+ "dns-servers": [
+ { "ip-address": "172.16.2.5" }
+ ]
+ },
+
+ ]
}
}</userinput>
</screen>
- </para>
- Similarly, we need to construct the three reverse DDNS Domains:
-
<table><info><title>Reverse DDNS Domains Needed</title></info>
- <tgroup cols="3" align="left">
- <colspec colname="num"/>
- <colspec colname="DDNS Domain name"/>
- <colspec colname="DDNS Domain DNS Servers"/>
- <thead>
- <row>
- <entry>#</entry>
- <entry>DDNS Domain Name</entry>
- <entry>DNS Servers</entry>
- </row>
- </thead>
- <tbody>
- <row>
- <entry>1.</entry>
- <entry>2.0.192.in-addr.arpa.</entry>
- <entry>172.16.1.5, 172.16.2.5</entry>
- </row>
- <row>
- <entry>2.</entry>
- <entry>1.0.0.0.8.d.b.0.1.0.0.2.ip6.arpa.</entry>
- <entry>3001:1::50</entry>
- </row>
- <row>
- <entry>3.</entry>
- <entry>0.182.in-addr.arpa.</entry>
- <entry>172.16.2.5</entry>
- </row>
- </tbody>
- </tgroup>
- </table>
- An address of "192.0.2.150" will match the first domain,
- "2001:db8:1::10" will match the second domain, and "192.0.50.77"
- the third domain.
- </para>
- These Reverse DDNS Domains are specified as follows:
+ </para>
+ <para>
+ Similarly, we need to construct the three reverse DDNS Domains:
+ <table><info><title>Reverse DDNS Domains Needed</title></info>
+ <tgroup cols="3" align="left">
+ <colspec colname="num"/>
+ <colspec colname="DDNS Domain name"/>
+ <colspec colname="DDNS Domain DNS Servers"/>
+ <thead>
+ <row>
+ <entry>#</entry>
+ <entry>DDNS Domain Name</entry>
+ <entry>DNS Servers</entry>
+ </row>
+ </thead>
+ <tbody>
+ <row>
+ <entry>1.</entry>
+ <entry>2.0.192.in-addr.arpa.</entry>
+ <entry>172.16.1.5, 172.16.2.5</entry>
+ </row>
+ <row>
+ <entry>2.</entry>
+ <entry>1.0.0.0.8.d.b.0.1.0.0.2.ip6.arpa.</entry>
+ <entry>3001:1::50</entry>
+ </row>
+ <row>
+ <entry>3.</entry>
+ <entry>0.182.in-addr.arpa.</entry>
+ <entry>172.16.2.5</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ An address of "192.0.2.150" will match the first domain,
+ "2001:db8:1::10" will match the second domain, and "192.0.50.77"
+ the third domain.
+ </para>
+ <para>
+ These Reverse DDNS Domains are specified as follows:
<screen><userinput>
"DhcpDdns": {
"reverse-ddns": {
- "ddns-domains": [
- {
- "name": "2.0.192.in-addr.arpa.",
- "key-name": "",
- "dns-servers": [
- { "ip-address": "172.16.1.5" },
- { "ip-address": "172.16.2.5" }
- ]
- }
- {
- "name": "1.0.0.0.8.B.D.0.1.0.0.2.ip6.arpa.",
- "key-name": "",
- "dns-servers": [
- { "ip-address": "2001:db8::1" }
- ]
- }
- {
- "name": "0.192.in-addr.arpa.",
- "key-name": "",
- "dns-servers": [
- { "ip-address": "172.16.2.5" }
- ]
- }
- ]
+ "ddns-domains": [
+ {
+ "name": "2.0.192.in-addr.arpa.",
+ "key-name": "",
+ "dns-servers": [
+ { "ip-address": "172.16.1.5" },
+ { "ip-address": "172.16.2.5" }
+ ]
+ }
+ {
+ "name": "1.0.0.0.8.B.D.0.1.0.0.2.ip6.arpa.",
+ "key-name": "",
+ "dns-servers": [
+ { "ip-address": "2001:db8::1" }
+ ]
+ }
+ {
+ "name": "0.192.in-addr.arpa.",
+ "key-name": "",
+ "dns-servers": [
+ { "ip-address": "172.16.2.5" }
+ ]
+ }
+ ]
}
}</userinput>
</screen>
- </para>
- </section> <!-- end of "d2-example" -->
+ </para>
+ </section> <!-- end of "d2-example" -->
+
</section> <!-- end of section "d2-configuration" -->
+
<section><info><title>DHCP-DDNS Server Limitations</title></info>
<para>The following are the current limitations of the DHCP-DDNS Server.</para>
<itemizedlist>
- <listitem>
- <simpara>
- Requests received from the DHCP servers are placed in a
- queue until they are processed. Currently all queued requests
- are lost when the server shuts down.
- </simpara>
- </listitem>
+ <listitem>
+ <simpara>
+ Requests received from the DHCP servers are placed in a
+ queue until they are processed. Currently all queued requests
+ are lost when the server shuts down.
+ </simpara>
+ </listitem>
</itemizedlist>
</section>
- </chapter>
\ No newline at end of file
+ </chapter>
projects / thirdparty / kea.git / commitdiff
