if (type == DPSW_BROADCAST && ethsw->ports[j]->bcast_flood)
                        cfg->if_id[i++] = ethsw->ports[j]->idx;
-               else if (type == DPSW_FLOODING)
+               else if (type == DPSW_FLOODING && ethsw->ports[j]->ucast_flood)
                        cfg->if_id[i++] = ethsw->ports[j]->idx;
        }
 
        if (flags.mask & BR_BCAST_FLOOD)
                port_priv->bcast_flood = !!(flags.val & BR_BCAST_FLOOD);
 
+       if (flags.mask & BR_FLOOD)
+               port_priv->ucast_flood = !!(flags.val & BR_FLOOD);
+
        return dpaa2_switch_fdb_set_egress_flood(ethsw, port_priv->fdb->fdb_id);
 }
 
                                              struct switchdev_brport_flags flags,
                                              struct netlink_ext_ack *extack)
 {
-       if (flags.mask & ~(BR_LEARNING | BR_BCAST_FLOOD))
+       if (flags.mask & ~(BR_LEARNING | BR_BCAST_FLOOD | BR_FLOOD |
+                          BR_MCAST_FLOOD))
                return -EINVAL;
 
+       if (flags.mask & (BR_FLOOD | BR_MCAST_FLOOD)) {
+               bool multicast = !!(flags.val & BR_MCAST_FLOOD);
+               bool unicast = !!(flags.val & BR_FLOOD);
+
+               if (unicast != multicast) {
+                       NL_SET_ERR_MSG_MOD(extack,
+                                          "Cannot configure multicast flooding independently of unicast");
+                       return -EINVAL;
+               }
+       }
+
        return 0;
 }
 
                        return err;
        }
 
-       if (flags.mask & BR_BCAST_FLOOD) {
+       if (flags.mask & (BR_BCAST_FLOOD | BR_FLOOD | BR_MCAST_FLOOD)) {
                err = dpaa2_switch_port_flood(port_priv, flags);
                if (err)
                        return err;
         * later bridge join will have the flooding flag on.
         */
        port_priv->bcast_flood = true;
+       port_priv->ucast_flood = true;
 
        /* Setup the egress flood policy (broadcast, unknown unicast).
         * When the port is not under a bridge, only the CTRL interface is part
        port_netdev->needed_headroom = DPAA2_SWITCH_NEEDED_HEADROOM;
 
        port_priv->bcast_flood = true;
+       port_priv->ucast_flood = true;
 
        /* Set MTU limits */
        port_netdev->min_mtu = ETH_MIN_MTU;