+++ /dev/null
-Installation Instructions
-*************************
-
-Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
-Inc.
-
- Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved. This file is offered as-is,
-without warranty of any kind.
-
-Basic Installation
-==================
-
- Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package. The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package. Some packages provide this
-`INSTALL' file but do not implement all of the features documented
-below. The lack of an optional feature in a given package is not
-necessarily a bug. More recommendations for GNU packages can be found
-in *note Makefile Conventions: (standards)Makefile Conventions.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
-
- The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system.
-
- Running `configure' might take a while. While running, it prints
- some messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package, generally using the just-built uninstalled binaries.
-
- 4. Type `make install' to install the programs and any data files and
- documentation. When installing into a prefix owned by root, it is
- recommended that the package be configured and built as a regular
- user, and only the `make install' phase executed with root
- privileges.
-
- 5. Optionally, type `make installcheck' to repeat any self-tests, but
- this time using the binaries in their final installed location.
- This target does not install anything. Running this target as a
- regular user, particularly if the prior `make install' required
- root privileges, verifies that the installation completed
- correctly.
-
- 6. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
- 7. Often, you can also type `make uninstall' to remove the installed
- files again. In practice, not all packages have tested that
- uninstallation works correctly, even though it is required by the
- GNU Coding Standards.
-
- 8. Some packages, particularly those that use Automake, provide `make
- distcheck', which can by used by developers to test that all other
- targets like `make install' and `make uninstall' work correctly.
- This target is generally not run by end users.
-
-Compilers and Options
-=====================
-
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c99 CFLAGS=-g LIBS=-lposix
-
- *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
- You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you can use GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'. This
-is known as a "VPATH" build.
-
- With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory. After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
- On MacOS X 10.5 and later systems, you can create libraries and
-executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor. Like
-this:
-
- ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CPP="gcc -E" CXXCPP="g++ -E"
-
- This is not guaranteed to produce working output in all cases, you
-may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
-
-Installation Names
-==================
-
- By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc. You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
-absolute file name.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them. In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
-specifications that were not explicitly provided.
-
- The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
-both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
-having to reconfigure or recompile.
-
- The first method involves providing an override variable for each
-affected directory. For example, `make install
-prefix=/alternate/directory' will choose an alternate location for all
-directory configuration variables that were expressed in terms of
-`${prefix}'. Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated. The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
- The second method involves providing the `DESTDIR' variable. For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names. The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
-does not work on platforms that have drive letters. On the other hand,
-it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
-
-Optional Features
-=================
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
- Some packages offer the ability to configure how verbose the
-execution of `make' will be. For these packages, running `./configure
---enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
---disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
-
-Particular systems
-==================
-
- On HP-UX, the default C compiler is not ANSI C compatible. If GNU
-CC is not installed, it is recommended to use the following options in
-order to use an ANSI C compiler:
-
- ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
-
-and if that doesn't work, install pre-built binaries of GCC for HP-UX.
-
- HP-UX `make' updates targets which have the same time stamps as
-their prerequisites, which makes it generally unusable when shipped
-generated files such as `configure' are involved. Use GNU `make'
-instead.
-
- On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file. The option `-nodtk' can be used as
-a workaround. If GNU CC is not installed, it is therefore recommended
-to try
-
- ./configure CC="cc"
-
-and if that doesn't work, try
-
- ./configure CC="cc -nodtk"
-
- On Solaris, don't put `/usr/ucb' early in your `PATH'. This
-directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
-
- On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'. It is recommended to use the following options:
-
- ./configure --prefix=/boot/common
-
-Specifying the System Type
-==========================
-
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
- CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
- OS
- KERNEL-OS
-
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
- If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
- Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
-
- ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug. Until the bug is fixed you can use this workaround:
-
- CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
- `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
- Print a summary of all of the options to `configure', and exit.
-
-`--help=short'
-`--help=recursive'
- Print a summary of the options unique to this package's
- `configure', and exit. The `short' variant lists options used
- only in the top level, while the `recursive' variant lists options
- also present in any nested packages.
-
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
-
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`--prefix=DIR'
- Use DIR as the installation prefix. *note Installation Names::
- for more details, including other options available for fine-tuning
- the installation locations.
-
-`--no-create'
-`-n'
- Run the configure checks, but stop before creating any output
- files.
-
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
-
+++ /dev/null
-
-#-----------------------------------------------------------------------
-# Supports the following non-standard switches.
-#
-# --enable-threadsafe
-# --enable-readline
-# --enable-editline
-# --enable-static-shell
-# --enable-dynamic-extensions
-#
-
-AC_PREREQ(2.61)
-AC_INIT(sqlite, --SQLITE-VERSION--, http://www.sqlite.org)
-AC_CONFIG_SRCDIR([sqlite3.c])
-AC_CONFIG_AUX_DIR([.])
-
-# Use automake.
-AM_INIT_AUTOMAKE([foreign])
-
-AC_SYS_LARGEFILE
-
-# Check for required programs.
-AC_PROG_CC
-AC_PROG_LIBTOOL
-AC_PROG_MKDIR_P
-
-# Check for library functions that SQLite can optionally use.
-AC_CHECK_FUNCS([fdatasync usleep fullfsync localtime_r gmtime_r])
-AC_FUNC_STRERROR_R
-
-AC_CONFIG_FILES([Makefile sqlite3.pc])
-BUILD_CFLAGS=
-AC_SUBST(BUILD_CFLAGS)
-
-#-------------------------------------------------------------------------
-# Two options to enable readline compatible libraries:
-#
-# --enable-editline
-# --enable-readline
-#
-# Both are enabled by default. If, after command line processing both are
-# still enabled, the script searches for editline first and automatically
-# disables readline if it is found. So, to use readline explicitly, the
-# user must pass "--disable-editline". To disable command line editing
-# support altogether, "--disable-editline --disable-readline".
-#
-# When searching for either library, check for headers before libraries
-# as some distros supply packages that contain libraries but not header
-# files, which come as a separate development package.
-#
-AC_ARG_ENABLE(editline, [AS_HELP_STRING([--enable-editline],[use BSD libedit])])
-AC_ARG_ENABLE(readline, [AS_HELP_STRING([--enable-readline],[use readline])])
-
-AS_IF([ test x"$enable_editline" != xno ],[
- AC_CHECK_HEADERS([editline/readline.h],[
- sLIBS=$LIBS
- LIBS=""
- AC_SEARCH_LIBS([readline],[edit],[
- AC_DEFINE([HAVE_EDITLINE],1,Define to use BSD editline)
- READLINE_LIBS="$LIBS -ltinfo"
- enable_readline=no
- ],[],[-ltinfo])
- AS_UNSET(ac_cv_search_readline)
- LIBS=$sLIBS
- ])
-])
-
-AS_IF([ test x"$enable_readline" != xno ],[
- AC_CHECK_HEADERS([readline/readline.h],[
- sLIBS=$LIBS
- LIBS=""
- AC_SEARCH_LIBS(tgetent, termcap curses ncurses ncursesw, [], [])
- AC_SEARCH_LIBS(readline,[readline edit], [
- AC_DEFINE([HAVE_READLINE],1,Define to use readline or wrapper)
- READLINE_LIBS=$LIBS
- ])
- LIBS=$sLIBS
- ])
-])
-
-AC_SUBST(READLINE_LIBS)
-#-----------------------------------------------------------------------
-
-#-----------------------------------------------------------------------
-# --enable-threadsafe
-#
-AC_ARG_ENABLE(threadsafe, [AS_HELP_STRING(
- [--enable-threadsafe], [build a thread-safe library [default=yes]])],
- [], [enable_threadsafe=yes])
-if test x"$enable_threadsafe" == "xno"; then
- BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_THREADSAFE=0"
-else
- BUILD_CFLAGS="$BUILD_CFLAGS -D_REENTRANT=1 -DSQLITE_THREADSAFE=1"
- AC_SEARCH_LIBS(pthread_create, pthread)
- AC_SEARCH_LIBS(pthread_mutexattr_init, pthread)
-fi
-#-----------------------------------------------------------------------
-
-#-----------------------------------------------------------------------
-# --enable-dynamic-extensions
-#
-AC_ARG_ENABLE(dynamic-extensions, [AS_HELP_STRING(
- [--enable-dynamic-extensions], [support loadable extensions [default=yes]])],
- [], [enable_dynamic_extensions=yes])
-if test x"$enable_dynamic_extensions" != "xno"; then
- AC_SEARCH_LIBS(dlopen, dl)
-else
- BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_OMIT_LOAD_EXTENSION=1"
-fi
-AC_MSG_CHECKING([for whether to support dynamic extensions])
-AC_MSG_RESULT($enable_dynamic_extensions)
-#-----------------------------------------------------------------------
-
-#-----------------------------------------------------------------------
-# --enable-math
-#
-AC_ARG_ENABLE(math, [AS_HELP_STRING(
- [--enable-math], [SQL math functions [default=yes]])],
- [], [enable_math=yes])
-AC_MSG_CHECKING([SQL math functions])
-if test x"$enable_math" = "xyes"; then
- BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_MATH_FUNCTIONS"
- AC_MSG_RESULT([enabled])
- AC_SEARCH_LIBS(ceil, m)
-else
- AC_MSG_RESULT([disabled])
-fi
-#-----------------------------------------------------------------------
-
-#-----------------------------------------------------------------------
-# --enable-fts4
-#
-AC_ARG_ENABLE(fts4, [AS_HELP_STRING(
- [--enable-fts4], [include fts4 support [default=yes]])],
- [], [enable_fts4=yes])
-AC_MSG_CHECKING([FTS4 extension])
-if test x"$enable_fts4" = "xyes"; then
- BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_FTS4"
- AC_MSG_RESULT([enabled])
-else
- AC_MSG_RESULT([disabled])
-fi
-#-----------------------------------------------------------------------
-
-#-----------------------------------------------------------------------
-# --enable-fts3
-#
-AC_ARG_ENABLE(fts3, [AS_HELP_STRING(
- [--enable-fts3], [include fts3 support [default=no]])],
- [], [])
-AC_MSG_CHECKING([FTS3 extension])
-if test x"$enable_fts3" = "xyes" -a x"$enable_fts4" = "xno"; then
- BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_FTS3"
- AC_MSG_RESULT([enabled])
-else
- AC_MSG_RESULT([disabled])
-fi
-#-----------------------------------------------------------------------
-
-#-----------------------------------------------------------------------
-# --enable-fts5
-#
-AC_ARG_ENABLE(fts5, [AS_HELP_STRING(
- [--enable-fts5], [include fts5 support [default=yes]])],
- [], [enable_fts5=yes])
-AC_MSG_CHECKING([FTS5 extension])
-if test x"$enable_fts5" = "xyes"; then
- AC_MSG_RESULT([enabled])
- AC_SEARCH_LIBS(log, m)
- BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_FTS5"
-else
- AC_MSG_RESULT([disabled])
-fi
-#-----------------------------------------------------------------------
-
-#-----------------------------------------------------------------------
-# --enable-rtree
-#
-AC_ARG_ENABLE(rtree, [AS_HELP_STRING(
- [--enable-rtree], [include rtree support [default=yes]])],
- [], [enable_rtree=yes])
-AC_MSG_CHECKING([RTREE extension])
-if test x"$enable_rtree" = "xyes"; then
- BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_GEOPOLY"
- AC_MSG_RESULT([enabled])
-else
- AC_MSG_RESULT([disabled])
-fi
-#-----------------------------------------------------------------------
-
-#-----------------------------------------------------------------------
-# --enable-session
-#
-AC_ARG_ENABLE(session, [AS_HELP_STRING(
- [--enable-session], [enable the session extension [default=no]])],
- [], [])
-AC_MSG_CHECKING([Session extension])
-if test x"$enable_session" = "xyes"; then
- BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_SESSION -DSQLITE_ENABLE_PREUPDATE_HOOK"
- AC_MSG_RESULT([enabled])
-else
- AC_MSG_RESULT([disabled])
-fi
-#-----------------------------------------------------------------------
-
-#-----------------------------------------------------------------------
-# --enable-debug
-#
-AC_ARG_ENABLE(debug, [AS_HELP_STRING(
- [--enable-debug], [build with debugging features enabled [default=no]])],
- [], [])
-AC_MSG_CHECKING([Build type])
-if test x"$enable_debug" = "xyes"; then
- BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_DEBUG -DSQLITE_ENABLE_SELECTTRACE -DSQLITE_ENABLE_WHERETRACE"
- CFLAGS="-g -O0"
- AC_MSG_RESULT([debug])
-else
- AC_MSG_RESULT([release])
-fi
-#-----------------------------------------------------------------------
-
-#-----------------------------------------------------------------------
-# --enable-static-shell
-#
-AC_ARG_ENABLE(static-shell, [AS_HELP_STRING(
- [--enable-static-shell],
- [statically link libsqlite3 into shell tool [default=yes]])],
- [], [enable_static_shell=yes])
-if test x"$enable_static_shell" = "xyes"; then
- EXTRA_SHELL_OBJ=sqlite3-sqlite3.$OBJEXT
-else
- EXTRA_SHELL_OBJ=libsqlite3.la
-fi
-AC_SUBST(EXTRA_SHELL_OBJ)
-#-----------------------------------------------------------------------
-
-AC_CHECK_FUNCS(posix_fallocate)
-AC_CHECK_HEADERS(zlib.h,[
- AC_SEARCH_LIBS(deflate,z,[BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_HAVE_ZLIB"])
-])
-
-AC_SEARCH_LIBS(system,,,[SHELL_CFLAGS="-DSQLITE_NOHAVE_SYSTEM"])
-AC_SUBST(SHELL_CFLAGS)
-
-#-----------------------------------------------------------------------
-# UPDATE: Maybe it's better if users just set CFLAGS before invoking
-# configure. This option doesn't really add much...
-#
-# --enable-tempstore
-#
-# AC_ARG_ENABLE(tempstore, [AS_HELP_STRING(
-# [--enable-tempstore],
-# [in-memory temporary tables (never, no, yes, always) [default=no]])],
-# [], [enable_tempstore=no])
-# AC_MSG_CHECKING([for whether or not to store temp tables in-memory])
-# case "$enable_tempstore" in
-# never ) TEMP_STORE=0 ;;
-# no ) TEMP_STORE=1 ;;
-# always ) TEMP_STORE=3 ;;
-# yes ) TEMP_STORE=3 ;;
-# * )
-# TEMP_STORE=1
-# enable_tempstore=yes
-# ;;
-# esac
-# AC_MSG_RESULT($enable_tempstore)
-# AC_SUBST(TEMP_STORE)
-#-----------------------------------------------------------------------
-
-AC_OUTPUT
projects / thirdparty / sqlite.git / commitdiff
