configs: j722s_evm_a53_defconfig: enable USB DFU support

The USB0 instance of USB on J722S SoC is a Designware USB Controller with
the same glue layer (wrapper) as AM62 SoC. In order to support USB DFU boot
and USB DFU flash with USB0, enable the corresponding glue layer driver.

While at it, sync with savedefconfig.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>

diff --git a/configs/j722s_evm_a53_defconfig b/configs/j722s_evm_a53_defconfig
index 81eb934ed6e4d6c82bea89e7005de302fe37c805..b53dc3054f4e80c963096ec2aa636e991a80fa54 100644 (file)
--- a/configs/j722s_evm_a53_defconfig
+++ b/configs/j722s_evm_a53_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_K3=y
 CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_TI_COMMON_CMD_OPTIONS=y
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
@@ -54,7 +55,6 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
 CONFIG_SPL_THERMAL=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
 CONFIG_CMD_MTD=y
 CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_USB_MASS_STORAGE=y
@@ -155,6 +155,8 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GENERIC=y
 CONFIG_SPL_USB_DWC3_GENERIC=y
+CONFIG_SPL_USB_DWC3_AM62=y
+CONFIG_USB_DWC3_AM62=y
 CONFIG_SPL_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_SPL_USB_GADGET=y
@@ -163,4 +165,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0451
 CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
 CONFIG_SPL_DFU=y
 CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
-CONFIG_TI_COMMON_CMD_OPTIONS=y