ARM: dts: qcom: msm8926-motorola-peregrine: Add accelerometer, magnetometer, regulator

Add the accelerometer, magnetometer and regulator that are present on
the Motorola Moto G 4G (2013) device.

Signed-off-by: André Apitzsch <git@apitzsch.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240617-peregrine-v2-1-c8835d2da7af@apitzsch.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
index 0cbe2d2fbbb18b892c3fa89ab212dac181c85379..50ae3cfc95bb1b2d164067386e38f40c8ef1c01a 100644 (file)
--- a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
@@ -68,9 +68,60 @@
        };
 };
 
+&blsp1_i2c2 {
+       clock-frequency = <100000>;
+       status = "okay";
+
+       magnetometer@c {
+               compatible = "asahi-kasei,ak8963";
+               reg = <0xc>;
+               interrupts-extended = <&tlmm 38 IRQ_TYPE_EDGE_FALLING>;
+               reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+               vdd-supply = <&pm8226_l19>;
+               pinctrl-0 = <&mag_int_default &mag_reset_default>;
+               pinctrl-names = "default";
+       };
+
+       accelerometer@18 {
+               compatible = "st,lis3dh-accel";
+               reg = <0x18>;
+               interrupts-extended = <&tlmm 1 IRQ_TYPE_EDGE_FALLING>;
+               vdd-supply = <&pm8226_l19>;
+               pinctrl-0 = <&accel_int_default>;
+               pinctrl-names = "default";
+               st,drdy-int-pin = <1>;
+       };
+};
+
 &blsp1_i2c3 {
+       clock-frequency = <400000>;
        status = "okay";
 
+       regulator@3e {
+               compatible = "ti,tps65132";
+               reg = <0x3e>;
+               pinctrl-0 = <&reg_lcd_default>;
+               pinctrl-names = "default";
+
+               reg_lcd_pos: outp {
+                       regulator-name = "outp";
+                       regulator-min-microvolt = <4000000>;
+                       regulator-max-microvolt = <6000000>;
+                       regulator-active-discharge = <1>;
+                       regulator-boot-on;
+                       enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+               };
+
+               reg_lcd_neg: outn {
+                       regulator-name = "outn";
+                       regulator-min-microvolt = <4000000>;
+                       regulator-max-microvolt = <6000000>;
+                       regulator-active-discharge = <1>;
+                       regulator-boot-on;
+                       enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
        sensor@48 {
                compatible = "ti,tmp108";
                reg = <0x48>;
@@ -278,6 +329,40 @@
        status = "okay";
 };
 
+&tlmm {
+       accel_int_default: accel-int-default-state {
+               pins = "gpio1";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+               output-disable;
+       };
+
+       mag_int_default: mag-int-default-state {
+               pins = "gpio38";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+               output-disable;
+       };
+
+       mag_reset_default: mag-reset-default-state {
+               pins = "gpio62";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+               output-high;
+       };
+
+       reg_lcd_default: reg-lcd-default-state {
+               pins = "gpio31", "gpio33";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+               output-high;
+       };
+};
+
 &usb {
        extcon = <&smbb>;
        dr_mode = "peripheral";