Merge tag 'v3.7-rc3' into for-linus to sync up with recent USB changes

diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
new file mode 100644 (file)
index 0000000..df70318
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
@@ -0,0 +1,19 @@
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+- wakeup-gpios: the gpio pin to be used for waking up the controller
+  as well as uased as irq pin
+
+Example:
+
+       egalax_ts@04 {
+               compatible = "eeti,egalax_ts";
+               reg = <0x04>;
+               interrupt-parent = <&gpio1>;
+               interrupts = <9 2>;
+               wakeup-gpios = <&gpio1 9 0>;
+       };

diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index aa6010131179588bb75ea3326843df499db7aaf1..0a67031ffc131a2559d6573d5c3cf65173edd9c6 100644 (file)
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1518,6 +1518,9 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 
                input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
                input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
+
+               __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+
                wacom_setup_cintiq(wacom_wac);
                break;
 

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 1ba232cbc09d4e8744e1a827c3939ad7292e85a6..f7668b24c378aeed3b4ca4fc1c09d025255eccc1 100644 (file)
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -239,7 +239,7 @@ config TOUCHSCREEN_EETI
 
 config TOUCHSCREEN_EGALAX
        tristate "EETI eGalax multi-touch panel support"
-       depends on I2C
+       depends on I2C && OF
        help
          Say Y here to enable support for I2C connected EETI
          eGalax multi-touch panels.

diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c
index c1e3460f1195aed3953c0e09542c9718d8664421..13fa62fdfb0b4160f76484bd2aadc92151597ab8 100644 (file)
--- a/drivers/input/touchscreen/egalax_ts.c
+++ b/drivers/input/touchscreen/egalax_ts.c
@@ -28,6 +28,7 @@
 #include <linux/slab.h>
 #include <linux/bitops.h>
 #include <linux/input/mt.h>
+#include <linux/of_gpio.h>
 
 /*
  * Mouse Mode: some panel may configure the controller to mouse mode,
@@ -122,9 +123,17 @@ static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id)
 /* wake up controller by an falling edge of interrupt gpio.  */
 static int egalax_wake_up_device(struct i2c_client *client)
 {
-       int gpio = irq_to_gpio(client->irq);
+       struct device_node *np = client->dev.of_node;
+       int gpio;
        int ret;
 
+       if (!np)
+               return -ENODEV;
+
+       gpio = of_get_named_gpio(np, "wakeup-gpios", 0);
+       if (!gpio_is_valid(gpio))
+               return -ENODEV;
+
        ret = gpio_request(gpio, "egalax_irq");
        if (ret < 0) {
                dev_err(&client->dev,
@@ -181,7 +190,11 @@ static int __devinit egalax_ts_probe(struct i2c_client *client,
        ts->input_dev = input_dev;
 
        /* controller may be in sleep, wake it up. */
-       egalax_wake_up_device(client);
+       error = egalax_wake_up_device(client);
+       if (error) {
+               dev_err(&client->dev, "Failed to wake up the controller\n");
+               goto err_free_dev;
+       }
 
        ret = egalax_firmware_version(client);
        if (ret < 0) {
@@ -274,11 +287,17 @@ static int egalax_ts_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume);
 
+static struct of_device_id egalax_ts_dt_ids[] = {
+       { .compatible = "eeti,egalax_ts" },
+       { /* sentinel */ }
+};
+
 static struct i2c_driver egalax_ts_driver = {
        .driver = {
                .name   = "egalax_ts",
                .owner  = THIS_MODULE,
                .pm     = &egalax_ts_pm_ops,
+               .of_match_table = of_match_ptr(egalax_ts_dt_ids),
        },
        .id_table       = egalax_ts_id,
        .probe          = egalax_ts_probe,