--- /dev/null
+Git v1.7.0.1 Release Notes
+==========================
+
+Fixes since v1.7.0
+------------------
+
+ * In a freshly created repository "rev-parse HEAD^0" complained that
+ it is dangling symref, even though "rev-parse HEAD" didn't.
+
+ * "git show :no-such-name" tried to access the index without bounds
+ check, leading to a potential segfault.
+
+ * Message from "git cherry-pick" was harder to read and use than necessary
+ when it stopped due to conflicting changes.
+
+ * We referred to ".git/refs/" throughout the documentation when we
+ meant to talk about abstract notion of "ref namespace". Because
+ people's repositories often have packed refs these days, this was
+ confusing.
+
+ * "git diff --output=/path/that/cannot/be/written" did not correctly
+ error out.
+
+ * "git grep -e -pattern-that-begin-with-dash paths..." could not be
+ spelled as "git grep -- -pattern-that-begin-with-dash paths..." which
+ would be a GNU way to use "--" as "end of options".
+
+ * "git grep" compiled with threading support tried to access an
+ uninitialized mutex on boxes with a single CPU.
+
+ * "git stash pop -q --index" failed because the unnecessary --index
+ option was propagated to "git stash drop" that is internally run at the
+ end.
+
+And other minor fixes and documentation updates.
--- /dev/null
+Git v1.7.0.2 Release Notes
+==========================
+
+Fixes since v1.7.0.1
+--------------------
+
+ * "git fast-import" didn't work with a large input, as it lacked support
+ for producing the pack index in v2 format.
+
+ * "git imap-send" didn't use CRLF line endings over the imap protocol
+ when storing its payload to the draft box, violating RFC 3501.
+
+ * Error messages generated on the receiving end did not come back to "git
+ push".
+
+And other minor fixes and documentation updates.
+
+---
+exec >/var/tmp/1
+O=v1.7.0.1-28-gb46946a
+echo O=$(git describe maint)
+git shortlog --no-merges $O..maint
color.grep.match::
Use customized color for matches. The value of this variable
- may be specified as in color.branch.<slot>. It is passed using
- the environment variables 'GREP_COLOR' and 'GREP_COLORS' when
- calling an external 'grep'.
+ may be specified as in color.branch.<slot>.
color.interactive::
When set to `always`, always use colors for interactive prompts
Remove everything in body before a scissors line (see
linkgit:git-mailinfo[1]).
----no-scissors::
+--no-scissors::
Ignore scissors lines (see linkgit:git-mailinfo[1]).
-q::
A reference is used in git to specify branches and tags. A
branch head is stored under the `$GIT_DIR/refs/heads` directory, and
-a tag is stored under the `$GIT_DIR/refs/tags` directory. git
-imposes the following rules on how references are named:
+a tag is stored under the `$GIT_DIR/refs/tags` directory (or, if refs
+are packed by `git gc`, as entries in the `$GIT_DIR/packed-refs` file).
+git imposes the following rules on how references are named:
. They can include slash `/` for hierarchical (directory)
grouping, but no slash-separated component can begin with a
current master branch, if any.
This default configuration is achieved by creating references to
-the remote branch heads under `$GIT_DIR/refs/remotes/origin` and
+the remote branch heads under `refs/remotes/origin` and
by initializing `remote.origin.url` and `remote.origin.fetch`
configuration variables.
Show untracked files (Default: 'all').
+
The mode parameter is optional, and is used to specify
-the handling of untracked files. The possible options are:
+the handling of untracked files.
++
+The possible options are:
+
---
- 'no' - Show no untracked files
- 'normal' - Shows untracked files and directories
- 'all' - Also shows individual files in untracked directories.
---
+
See linkgit:git-config[1] for configuration variable
used to change the default for when the option is not
--max-pack-size=<n>::
Maximum size of each output packfile.
- The default is 4 GiB as that is the maximum allowed
- packfile size (due to file format limitations). Some
- importers may wish to lower this, such as to ensure the
- resulting packfiles fit on CDs.
+ The default is unlimited.
--big-file-threshold=<n>::
Maximum size of a blob that fast-import will attempt to
Invokes 'git-upload-pack' on a possibly remote repository
and asks it to send objects missing from this repository, to
update the named heads. The list of commits available locally
-is found out by scanning local $GIT_DIR/refs/ and sent to
+is found out by scanning the local refs/ hierarchy and sent to
'git-upload-pack' running on the other end.
This command degenerates to download everything to complete the
locked against repacking.
--thin::
- Spend extra cycles to minimize the number of objects to be sent.
- Use it on slower connection.
+ Fetch a "thin" pack, which records objects in deltified form based
+ on objects not included in the pack to reduce network traffic.
--include-tag::
If the remote side supports it, annotated tags objects will
[-A <post-context>] [-B <pre-context>] [-C <context>]
[-f <file>] [-e] <pattern>
[--and|--or|--not|(|)|-e <pattern>...] [<tree>...]
- [--] [<path>...]
+ [--] [<pathspec>...]
DESCRIPTION
-----------
-Look for specified patterns in the working tree files, blobs
-registered in the index file, or given tree objects.
+Look for specified patterns in the tracked files in the work tree, blobs
+registered in the index file, or blobs in given tree objects.
OPTIONS
Don't match the pattern in binary files.
--max-depth <depth>::
- For each pathspec given on command line, descend at most <depth>
+ For each <pathspec> given on command line, descend at most <depth>
levels of directories. A negative value means no limit.
-w::
\--::
Signals the end of options; the rest of the parameters
- are <path> limiters.
+ are <pathspec> limiters.
+<pathspec>...::
+ If given, limit the search to paths matching at least one pattern.
+ Both leading paths match and glob(7) patterns are supported.
Example
-------
+git grep 'time_t' -- '*.[ch]'::
+ Looks for `time_t` in all tracked .c and .h files in the working
+ directory and its subdirectories.
+
git grep -e \'#define\' --and \( -e MAX_PATH -e PATH_MAX \)::
Looks for a line that has `#define` and either `MAX_PATH` or
`PATH_MAX`.
'git repack'.
--fix-thin::
- It is possible for 'git pack-objects' to build
- "thin" pack, which records objects in deltified form based on
- objects not included in the pack to reduce network traffic.
- Those objects are expected to be present on the receiving end
- and they must be included in the pack for that pack to be self
- contained and indexable. Without this option any attempt to
- index a thin pack will fail. This option only makes sense in
- conjunction with --stdin.
+ Fix a "thin" pack produced by `git pack-objects --thin` (see
+ linkgit:git-pack-objects[1] for details) by adding the
+ excluded objects the deltified objects are based on to the
+ pack. This option only makes sense in conjunction with --stdin.
--keep::
Before moving the index into its final destination
Reads list of objects from the standard input, and writes a packed
archive with specified base-name, or to the standard output.
-A packed archive is an efficient way to transfer set of objects
-between two repositories, and also is an archival format which
-is efficient to access. The packed archive format (.pack) is
-designed to be self contained so that it can be unpacked without
-any further information, but for fast, random access to the objects
-in the pack, a pack index file (.idx) will be generated.
-
-Placing both in the pack/ subdirectory of $GIT_OBJECT_DIRECTORY (or
+A packed archive is an efficient way to transfer a set of objects
+between two repositories as well as an access efficient archival
+format. In a packed archive, an object is either stored as a
+compressed whole or as a difference from some other object.
+The latter is often called a delta.
+
+The packed archive format (.pack) is designed to be self-contained
+so that it can be unpacked without any further information. Therefore,
+each object that a delta depends upon must be present within the pack.
+
+A pack index file (.idx) is generated for fast, random access to the
+objects in the pack. Placing both the index file (.idx) and the packed
+archive (.pack) in the pack/ subdirectory of $GIT_OBJECT_DIRECTORY (or
any of the directories on $GIT_ALTERNATE_OBJECT_DIRECTORIES)
-enables git to read from such an archive.
+enables git to read from the pack archive.
The 'git unpack-objects' command can read the packed archive and
expand the objects contained in the pack into "one-file
commands when a pack is created on-the-fly for efficient network
transport by their peers.
-In a packed archive, an object is either stored as a compressed
-whole, or as a difference from some other object. The latter is
-often called a delta.
-
OPTIONS
-------
--all::
This implies `--revs`. In addition to the list of
revision arguments read from the standard input, pretend
- as if all refs under `$GIT_DIR/refs` are specified to be
+ as if all refs under `refs/` are specified to be
included.
--include-tag::
Add --no-reuse-object if you want to force a uniform compression
level on all data no matter the source.
+--thin::
+ Create a "thin" pack by omitting the common objects between a
+ sender and a receiver in order to reduce network transfer. This
+ option only makes sense in conjunction with --stdout.
++
+Note: A thin pack violates the packed archive format by omitting
+required objects and is thus unusable by git without making it
+self-contained. Use `git index-pack --fix-thin`
+(see linkgit:git-index-pack[1]) to restore the self-contained property.
+
--delta-base-offset::
A packed archive can express base object of a delta as
either 20-byte object name or as an offset in the
'git prune'. See the section "NOTES", below.
This runs 'git fsck --unreachable' using all the refs
-available in `$GIT_DIR/refs`, optionally with additional set of
+available in `refs/`, optionally with additional set of
objects specified on the command line, and prunes all unpacked
objects unreachable from any of these head objects from the object database.
In addition, it
--all::
Instead of naming each ref to push, specifies that all
- refs under `$GIT_DIR/refs/heads/` be pushed.
+ refs under `refs/heads/` be pushed.
--mirror::
Instead of naming each ref to push, specifies that all
- refs under `$GIT_DIR/refs/` (which includes but is not
+ refs under `refs/` (which includes but is not
limited to `refs/heads/`, `refs/remotes/`, and `refs/tags/`)
be mirrored to the remote repository. Newly created local
refs will be pushed to the remote end, locally updated refs
the same as prefixing all refs with a colon.
--tags::
- All refs under `$GIT_DIR/refs/tags` are pushed, in
+ All refs under `refs/tags` are pushed, in
addition to refspecs explicitly listed on the command
line.
--thin::
--no-thin::
- These options are passed to 'git send-pack'. Thin
- transfer spends extra cycles to minimize the number of
- objects to be sent and meant to be used on slower connection.
+ These options are passed to linkgit:git-send-pack[1]. A thin transfer
+ significantly reduces the amount of sent data when the sender and
+ receiver share many of the same objects in common. The default is
+ \--thin.
-v::
--verbose::
abbreviation mode.
--all::
- Show all refs found in `$GIT_DIR/refs`.
+ Show all refs found in `refs/`.
--branches[=pattern]::
--tags[=pattern]::
--remotes[=pattern]::
Show all branches, tags, or remote-tracking branches,
- respectively (i.e., refs found in `$GIT_DIR/refs/heads`,
- `$GIT_DIR/refs/tags`, or `$GIT_DIR/refs/remotes`,
- respectively).
+ respectively (i.e., refs found in `refs/heads`,
+ `refs/tags`, or `refs/remotes`, respectively).
+
If a `pattern` is given, only refs matching the given shell glob are
shown. If the pattern does not contain a globbing character (`?`,
`g`, and an abbreviated object name.
* A symbolic ref name. E.g. 'master' typically means the commit
- object referenced by $GIT_DIR/refs/heads/master. If you
+ object referenced by refs/heads/master. If you
happen to have both heads/master and tags/master, you can
explicitly say 'heads/master' to tell git which one you mean.
When ambiguous, a `<name>` is disambiguated by taking the
. if `$GIT_DIR/<name>` exists, that is what you mean (this is usually
useful only for `HEAD`, `FETCH_HEAD`, `ORIG_HEAD` and `MERGE_HEAD`);
- . otherwise, `$GIT_DIR/refs/<name>` if exists;
+ . otherwise, `refs/<name>` if exists;
- . otherwise, `$GIT_DIR/refs/tags/<name>` if exists;
+ . otherwise, `refs/tags/<name>` if exists;
- . otherwise, `$GIT_DIR/refs/heads/<name>` if exists;
+ . otherwise, `refs/heads/<name>` if exists;
- . otherwise, `$GIT_DIR/refs/remotes/<name>` if exists;
+ . otherwise, `refs/remotes/<name>` if exists;
- . otherwise, `$GIT_DIR/refs/remotes/<name>/HEAD` if exists.
+ . otherwise, `refs/remotes/<name>/HEAD` if exists.
+
HEAD names the commit your changes in the working tree is based on.
FETCH_HEAD records the branch you fetched from a remote repository
them easily.
MERGE_HEAD records the commit(s) you are merging into your branch
when you run 'git merge'.
++
+Note that any of the `refs/*` cases above may come either from
+the `$GIT_DIR/refs` directory or from the `$GIT_DIR/packed-refs` file.
* A ref followed by the suffix '@' with a date specification
enclosed in a brace
Run verbosely.
--thin::
- Spend extra cycles to minimize the number of objects to be sent.
- Use it on slower connection.
+ Send a "thin" pack, which records objects in deltified form based
+ on objects not included in the pack to reduce network traffic.
<host>::
A remote host to house the repository. When this
-----------
Shows the commit ancestry graph starting from the commits named
-with <rev>s or <globs>s (or all refs under $GIT_DIR/refs/heads
-and/or $GIT_DIR/refs/tags) semi-visually.
+with <rev>s or <globs>s (or all refs under refs/heads
+and/or refs/tags) semi-visually.
It cannot show more than 29 branches and commits at a time.
<glob>::
A glob pattern that matches branch or tag names under
- $GIT_DIR/refs. For example, if you have many topic
- branches under $GIT_DIR/refs/heads/topic, giving
+ refs/. For example, if you have many topic
+ branches under refs/heads/topic, giving
`topic/*` would show all of them.
-r::
-------
If you keep your primary branches immediately under
-`$GIT_DIR/refs/heads`, and topic branches in subdirectories of
+`refs/heads`, and topic branches in subdirectories of
it, having the following in the configuration file may help:
------------
you can give a more descriptive message on the command line when
you create one.
-The latest stash you created is stored in `$GIT_DIR/refs/stash`; older
+The latest stash you created is stored in `refs/stash`; older
stashes are found in the reflog of this reference and can be named using
the usual reflog syntax (e.g. `stash@\{0}` is the most recently
created stash, `stash@\{1}` is the one before it, `stash@\{2.hours.ago}`
branch of the `git.git` repository.
Documentation for older releases are available here:
-* link:v1.7.0/git.html[documentation for release 1.7.0]
+* link:v1.7.0.1/git.html[documentation for release 1.7.0.1]
* release notes for
+ link:RelNotes-1.7.0.1.txt[1.7.0.1],
link:RelNotes-1.7.0.txt[1.7.0].
* link:v1.6.6.2/git.html[documentation for release 1.6.6.2]
version (`%A`) and the other branches' version (`%B`). These
three tokens are replaced with the names of temporary files that
hold the contents of these versions when the command line is
-built.
+built. Additionally, %L will be replaced with the conflict marker
+size (see below).
The merge driver is expected to leave the result of the merge in
the file named with `%A` by overwriting it, and exit with zero
--all::
- Pretend as if all the refs in `$GIT_DIR/refs/` are listed on the
+ Pretend as if all the refs in `refs/` are listed on the
command line as '<commit>'.
--branches[=pattern]::
- Pretend as if all the refs in `$GIT_DIR/refs/heads` are listed
+ Pretend as if all the refs in `refs/heads` are listed
on the command line as '<commit>'. If `pattern` is given, limit
branches to ones matching given shell glob. If pattern lacks '?',
'*', or '[', '/*' at the end is implied.
--tags[=pattern]::
- Pretend as if all the refs in `$GIT_DIR/refs/tags` are listed
+ Pretend as if all the refs in `refs/tags` are listed
on the command line as '<commit>'. If `pattern` is given, limit
tags to ones matching given shell glob. If pattern lacks '?', '*',
or '[', '/*' at the end is implied.
--remotes[=pattern]::
- Pretend as if all the refs in `$GIT_DIR/refs/remotes` are listed
+ Pretend as if all the refs in `refs/remotes` are listed
on the command line as '<commit>'. If `pattern`is given, limit
remote tracking branches to ones matching given shell glob.
If pattern lacks '?', '*', or '[', '/*' at the end is implied.
ifndef::git-rev-list[]
--bisect::
- Pretend as if the bad bisection ref `$GIT_DIR/refs/bisect/bad`
+ Pretend as if the bad bisection ref `refs/bisect/bad`
was listed and as if it was followed by `--not` and the good
- bisection refs `$GIT_DIR/refs/bisect/good-*` on the command
+ bisection refs `refs/bisect/good-*` on the command
line.
endif::git-rev-list[]
Limit output to the one commit object which is roughly halfway between
included and excluded commits. Note that the bad bisection ref
-`$GIT_DIR/refs/bisect/bad` is added to the included commits (if it
-exists) and the good bisection refs `$GIT_DIR/refs/bisect/good-*` are
+`refs/bisect/bad` is added to the included commits (if it
+exists) and the good bisection refs `refs/bisect/good-*` are
added to the excluded commits (if they exist). Thus, supposing there
-are no refs in `$GIT_DIR/refs/bisect/`, if
+are no refs in `refs/bisect/`, if
-----------------------------------------------------------------------
$ git rev-list --bisect foo ^bar ^baz
--bisect-vars::
This calculates the same as `--bisect`, except that refs in
-`$GIT_DIR/refs/bisect/` are not used, and except that this outputs
+`refs/bisect/` are not used, and except that this outputs
text ready to be eval'ed by the shell. These lines will assign the
name of the midpoint revision to the variable `bisect_rev`, and the
expected number of commits to be tested after `bisect_rev` is tested
This outputs all the commit objects between the included and excluded
commits, ordered by their distance to the included and excluded
-commits. Refs in `$GIT_DIR/refs/bisect/` are not used. The farthest
+commits. Refs in `refs/bisect/` are not used. The farthest
from them is displayed first. (This is the only one displayed by
`--bisect`.)
+
`start_async`::
Run a function asynchronously. Takes a pointer to a `struct
- async` that specifies the details and returns a pipe FD
- from which the caller reads. See below for details.
+ async` that specifies the details and returns a set of pipe FDs
+ for communication with the function. See below for details.
`finish_async`::
.in: The FD must be readable; it becomes child's stdin.
.out: The FD must be writable; it becomes child's stdout.
- .err > 0 is not supported.
+ .err: The FD must be writable; it becomes child's stderr.
The specified FD is closed by start_command(), even if it fails to
run the sub-process!
struct async variable;
2. initializes .proc and .data;
3. calls start_async();
-4. processes the data by reading from the fd in .out;
-5. closes .out;
+4. processes communicates with proc through .in and .out;
+5. closes .in and .out;
6. calls finish_async().
+The members .in, .out are used to provide a set of fd's for
+communication between the caller and the callee as follows:
+
+. Specify 0 to have no file descriptor passed. The callee will
+ receive -1 in the corresponding argument.
+
+. Specify < 0 to have a pipe allocated; start_async() replaces
+ with the pipe FD in the following way:
+
+ .in: Returns the writable pipe end into which the caller
+ writes; the readable end of the pipe becomes the function's
+ in argument.
+
+ .out: Returns the readable pipe end from which the caller
+ reads; the writable end of the pipe becomes the function's
+ out argument.
+
+ The caller of start_async() must close the returned FDs after it
+ has completed reading from/writing from them.
+
+. Specify a file descriptor > 0 to be used by the function:
+
+ .in: The FD must be readable; it becomes the function's in.
+ .out: The FD must be writable; it becomes the function's out.
+
+ The specified FD is closed by start_async(), even if it fails to
+ run the function.
+
The function pointer in .proc has the following signature:
- int proc(int fd, void *data);
+ int proc(int in, int out, void *data);
-. fd specifies a writable file descriptor to which the function must
- write the data that it produces. The function *must* close this
- descriptor before it returns.
+. in, out specifies a set of file descriptors to which the function
+ must read/write the data that it needs/produces. The function
+ *must* close these descriptors before it returns. A descriptor
+ may be -1 if the caller did not configure a descriptor for that
+ direction.
. data is the value that the caller has specified in the .data member
of struct async.
UNIX, but by a thread in the same address space on Windows:
. It cannot change the program's state (global variables, environment,
- etc.) in a way that the caller notices; in other words, .out is the
- only communication channel to the caller.
+ etc.) in a way that the caller notices; in other words, .in and .out
+ are the only communication channels to the caller.
. It must not change the program's state that the caller of the
facility also uses.
#!/bin/sh
GVF=GIT-VERSION-FILE
-DEF_VER=v1.7.0
+DEF_VER=v1.7.0.1
LF='
'
-Documentation/RelNotes-1.7.0.txt
\ No newline at end of file
+Documentation/RelNotes-1.7.0.2.txt
\ No newline at end of file
exit(1);
}
+ if (!all) {
+ fprintf(stderr, "No testable commit found.\n"
+ "Maybe you started with bad path parameters?\n");
+ exit(4);
+ }
+
bisect_rev = revs.commits->item->object.sha1;
memcpy(bisect_rev_hex, sha1_to_hex(bisect_rev), 41);
return -1;
/*
- * If match_begining or match_end is specified, there is no
+ * If match_beginning or match_end is specified, there is no
* point starting from a wrong line that will never match and
* wander around and wait for a match at the specified end.
*/
"exit with zero when there's no error", 'e'),
OPT_SET_INT('p', NULL, &opt, "pretty-print object's content", 'p'),
OPT_SET_INT(0, "batch", &batch,
- "show info and content of objects feeded on stdin", BATCH),
+ "show info and content of objects fed from the standard input",
+ BATCH),
OPT_SET_INT(0, "batch-check", &batch,
- "show info about objects feeded on stdin",
+ "show info about objects fed from the standard input",
BATCH_CHECK),
OPT_END()
};
"on your username and hostname. Please check that they are accurate.\n"
"You can suppress this message by setting them explicitly:\n"
"\n"
-" git config --global user.name Your Name\n"
+" git config --global user.name \"Your Name\"\n"
" git config --global user.email you@example.com\n"
"\n"
"If the identity used for this commit is wrong, you can fix it with:\n"
if (*argv)
s.pathspec = get_pathspec(prefix, argv);
- read_cache();
+ read_cache_preload(s.pathspec);
refresh_index(&the_index, REFRESH_QUIET|REFRESH_UNMERGED, s.pathspec, NULL, NULL);
s.is_initial = get_sha1(s.reference, sha1) ? 1 : 0;
s.in_merge = in_merge;
return retval;
}
-static int sideband_demux(int fd, void *data)
+static int sideband_demux(int in, int out, void *data)
{
int *xd = data;
- int ret = recv_sideband("fetch-pack", xd[0], fd);
- close(fd);
+ int ret = recv_sideband("fetch-pack", xd[0], out);
+ close(out);
return ret;
}
*/
demux.proc = sideband_demux;
demux.data = xd;
+ demux.out = -1;
if (start_async(&demux))
die("fetch-pack: unable to fork off sideband"
" demultiplexer");
return 0;
}
+static void *lock_and_read_sha1_file(const unsigned char *sha1, enum object_type *type, unsigned long *size)
+{
+ void *data;
+
+ if (use_threads) {
+ read_sha1_lock();
+ data = read_sha1_file(sha1, type, size);
+ read_sha1_unlock();
+ } else {
+ data = read_sha1_file(sha1, type, size);
+ }
+ return data;
+}
+
static void *load_sha1(const unsigned char *sha1, unsigned long *size,
const char *name)
{
enum object_type type;
- char *data;
-
- read_sha1_lock();
- data = read_sha1_file(sha1, &type, size);
- read_sha1_unlock();
+ void *data = lock_and_read_sha1_file(sha1, &type, size);
if (!data)
error("'%s': unable to read %s", name, sha1_to_hex(sha1));
void *data;
unsigned long size;
- read_sha1_lock();
- data = read_sha1_file(entry.sha1, &type, &size);
- read_sha1_unlock();
-
+ data = lock_and_read_sha1_file(entry.sha1, &type, &size);
if (!data)
die("unable to read tree (%s)",
sha1_to_hex(entry.sha1));
PARSE_OPT_STOP_AT_NON_OPTION |
PARSE_OPT_NO_INTERNAL_HELP);
+ /*
+ * skip a -- separator; we know it cannot be
+ * separating revisions from pathnames if
+ * we haven't even had any patterns yet
+ */
+ if (argc > 0 && !opt.pattern_list && !strcmp(argv[0], "--")) {
+ argv++;
+ argc--;
+ }
+
/* First unrecognized non-option token */
if (argc > 0 && !opt.pattern_list) {
append_grep_pattern(&opt, argv[0], "command line", 0,
/*
* We cannot move this anywhere earlier because we do want to
- * know if --root was given explicitly from the comand line.
+ * know if --root was given explicitly from the command line.
*/
rev.show_root_diff = 1;
/*
* Write errors (particularly out of space) can result in
* failed temporary packs (and more rarely indexes and other
- * files begining with "tmp_") accumulating in the object
+ * files beginning with "tmp_") accumulating in the object
* and the pack directories.
*/
static void remove_temporary_files(const char *path)
#include "pack.h"
#include "refs.h"
#include "pkt-line.h"
+#include "sideband.h"
#include "run-command.h"
#include "exec_cmd.h"
#include "commit.h"
static int transfer_unpack_limit = -1;
static int unpack_limit = 100;
static int report_status;
+static int use_sideband;
static int prefer_ofs_delta = 1;
static int auto_update_server_info;
static int auto_gc = 1;
static const char *head_name;
-static char *capabilities_to_send;
+static int sent_capabilities;
static enum deny_action parse_deny_action(const char *var, const char *value)
{
static int show_ref(const char *path, const unsigned char *sha1, int flag, void *cb_data)
{
- if (!capabilities_to_send)
+ if (sent_capabilities)
packet_write(1, "%s %s\n", sha1_to_hex(sha1), path);
else
- packet_write(1, "%s %s%c%s\n",
- sha1_to_hex(sha1), path, 0, capabilities_to_send);
- capabilities_to_send = NULL;
+ packet_write(1, "%s %s%c%s%s\n",
+ sha1_to_hex(sha1), path, 0,
+ " report-status delete-refs side-band-64k",
+ prefer_ofs_delta ? " ofs-delta" : "");
+ sent_capabilities = 1;
return 0;
}
static void write_head_info(void)
{
for_each_ref(show_ref, NULL);
- if (capabilities_to_send)
+ if (!sent_capabilities)
show_ref("capabilities^{}", null_sha1, 0, NULL);
}
static const char pre_receive_hook[] = "hooks/pre-receive";
static const char post_receive_hook[] = "hooks/post-receive";
+static void rp_error(const char *err, ...) __attribute__((format (printf, 1, 2)));
+static void rp_warning(const char *err, ...) __attribute__((format (printf, 1, 2)));
+
+static void report_message(const char *prefix, const char *err, va_list params)
+{
+ int sz = strlen(prefix);
+ char msg[4096];
+
+ strncpy(msg, prefix, sz);
+ sz += vsnprintf(msg + sz, sizeof(msg) - sz, err, params);
+ if (sz > (sizeof(msg) - 1))
+ sz = sizeof(msg) - 1;
+ msg[sz++] = '\n';
+
+ if (use_sideband)
+ send_sideband(1, 2, msg, sz, use_sideband);
+ else
+ xwrite(2, msg, sz);
+}
+
+static void rp_warning(const char *err, ...)
+{
+ va_list params;
+ va_start(params, err);
+ report_message("warning: ", err, params);
+ va_end(params);
+}
+
+static void rp_error(const char *err, ...)
+{
+ va_list params;
+ va_start(params, err);
+ report_message("error: ", err, params);
+ va_end(params);
+}
+
+static int copy_to_sideband(int in, int out, void *arg)
+{
+ char data[128];
+ while (1) {
+ ssize_t sz = xread(in, data, sizeof(data));
+ if (sz <= 0)
+ break;
+ send_sideband(1, 2, data, sz, use_sideband);
+ }
+ close(in);
+ return 0;
+}
+
static int run_receive_hook(const char *hook_name)
{
static char buf[sizeof(commands->old_sha1) * 2 + PATH_MAX + 4];
struct command *cmd;
struct child_process proc;
+ struct async muxer;
const char *argv[2];
int have_input = 0, code;
proc.in = -1;
proc.stdout_to_stderr = 1;
+ if (use_sideband) {
+ memset(&muxer, 0, sizeof(muxer));
+ muxer.proc = copy_to_sideband;
+ muxer.in = -1;
+ code = start_async(&muxer);
+ if (code)
+ return code;
+ proc.err = muxer.in;
+ }
+
code = start_command(&proc);
- if (code)
+ if (code) {
+ if (use_sideband)
+ finish_async(&muxer);
return code;
+ }
+
for (cmd = commands; cmd; cmd = cmd->next) {
if (!cmd->error_string) {
size_t n = snprintf(buf, sizeof(buf), "%s %s %s\n",
}
}
close(proc.in);
+ if (use_sideband)
+ finish_async(&muxer);
return finish_command(&proc);
}
{
static const char update_hook[] = "hooks/update";
const char *argv[5];
+ struct child_process proc;
+ int code;
if (access(update_hook, X_OK) < 0)
return 0;
argv[3] = sha1_to_hex(cmd->new_sha1);
argv[4] = NULL;
- return run_command_v_opt(argv, RUN_COMMAND_NO_STDIN |
- RUN_COMMAND_STDOUT_TO_STDERR);
+ memset(&proc, 0, sizeof(proc));
+ proc.no_stdin = 1;
+ proc.stdout_to_stderr = 1;
+ proc.err = use_sideband ? -1 : 0;
+ proc.argv = argv;
+
+ code = start_command(&proc);
+ if (code)
+ return code;
+ if (use_sideband)
+ copy_to_sideband(proc.err, -1, NULL);
+ return finish_command(&proc);
}
static int is_ref_checked_out(const char *ref)
{
int i;
for (i = 0; i < ARRAY_SIZE(refuse_unconfigured_deny_msg); i++)
- error("%s", refuse_unconfigured_deny_msg[i]);
+ rp_error("%s", refuse_unconfigured_deny_msg[i]);
}
static char *refuse_unconfigured_deny_delete_current_msg[] = {
for (i = 0;
i < ARRAY_SIZE(refuse_unconfigured_deny_delete_current_msg);
i++)
- error("%s", refuse_unconfigured_deny_delete_current_msg[i]);
+ rp_error("%s", refuse_unconfigured_deny_delete_current_msg[i]);
}
static const char *update(struct command *cmd)
/* only refs/... are allowed */
if (prefixcmp(name, "refs/") || check_ref_format(name + 5)) {
- error("refusing to create funny ref '%s' remotely", name);
+ rp_error("refusing to create funny ref '%s' remotely", name);
return "funny refname";
}
case DENY_IGNORE:
break;
case DENY_WARN:
- warning("updating the current branch");
+ rp_warning("updating the current branch");
break;
case DENY_REFUSE:
case DENY_UNCONFIGURED:
- error("refusing to update checked out branch: %s", name);
+ rp_error("refusing to update checked out branch: %s", name);
if (deny_current_branch == DENY_UNCONFIGURED)
refuse_unconfigured_deny();
return "branch is currently checked out";
if (!is_null_sha1(old_sha1) && is_null_sha1(new_sha1)) {
if (deny_deletes && !prefixcmp(name, "refs/heads/")) {
- error("denying ref deletion for %s", name);
+ rp_error("denying ref deletion for %s", name);
return "deletion prohibited";
}
case DENY_IGNORE:
break;
case DENY_WARN:
- warning("deleting the current branch");
+ rp_warning("deleting the current branch");
break;
case DENY_REFUSE:
case DENY_UNCONFIGURED:
if (deny_delete_current == DENY_UNCONFIGURED)
refuse_unconfigured_deny_delete_current();
- error("refusing to delete the current branch: %s", name);
+ rp_error("refusing to delete the current branch: %s", name);
return "deletion of the current branch prohibited";
}
}
break;
free_commit_list(bases);
if (!ent) {
- error("denying non-fast-forward %s"
- " (you should pull first)", name);
+ rp_error("denying non-fast-forward %s"
+ " (you should pull first)", name);
return "non-fast-forward";
}
}
if (run_update_hook(cmd)) {
- error("hook declined to update %s", name);
+ rp_error("hook declined to update %s", name);
return "hook declined";
}
if (is_null_sha1(new_sha1)) {
if (!parse_object(old_sha1)) {
- warning ("Allowing deletion of corrupt ref.");
+ rp_warning("Allowing deletion of corrupt ref.");
old_sha1 = NULL;
}
if (delete_ref(name, old_sha1, 0)) {
- error("failed to delete %s", name);
+ rp_error("failed to delete %s", name);
return "failed to delete";
}
return NULL; /* good */
else {
lock = lock_any_ref_for_update(name, old_sha1, 0);
if (!lock) {
- error("failed to lock %s", name);
+ rp_error("failed to lock %s", name);
return "failed to lock";
}
if (write_ref_sha1(lock, new_sha1, "push")) {
static void run_update_post_hook(struct command *cmd)
{
struct command *cmd_p;
- int argc, status;
+ int argc;
const char **argv;
+ struct child_process proc;
for (argc = 0, cmd_p = cmd; cmd_p; cmd_p = cmd_p->next) {
if (cmd_p->error_string)
argc++;
}
argv[argc] = NULL;
- status = run_command_v_opt(argv, RUN_COMMAND_NO_STDIN
- | RUN_COMMAND_STDOUT_TO_STDERR);
+
+ memset(&proc, 0, sizeof(proc));
+ proc.no_stdin = 1;
+ proc.stdout_to_stderr = 1;
+ proc.err = use_sideband ? -1 : 0;
+ proc.argv = argv;
+
+ if (!start_command(&proc)) {
+ if (use_sideband)
+ copy_to_sideband(proc.err, -1, NULL);
+ finish_command(&proc);
+ }
}
static void execute_commands(const char *unpacker_error)
if (reflen + 82 < len) {
if (strstr(refname + reflen + 1, "report-status"))
report_status = 1;
+ if (strstr(refname + reflen + 1, "side-band-64k"))
+ use_sideband = LARGE_PACKET_MAX;
}
cmd = xmalloc(sizeof(struct command) + len - 80);
hashcpy(cmd->old_sha1, old_sha1);
static void report(const char *unpack_status)
{
struct command *cmd;
- packet_write(1, "unpack %s\n",
- unpack_status ? unpack_status : "ok");
+ struct strbuf buf = STRBUF_INIT;
+
+ packet_buf_write(&buf, "unpack %s\n",
+ unpack_status ? unpack_status : "ok");
for (cmd = commands; cmd; cmd = cmd->next) {
if (!cmd->error_string)
- packet_write(1, "ok %s\n",
- cmd->ref_name);
+ packet_buf_write(&buf, "ok %s\n",
+ cmd->ref_name);
else
- packet_write(1, "ng %s %s\n",
- cmd->ref_name, cmd->error_string);
+ packet_buf_write(&buf, "ng %s %s\n",
+ cmd->ref_name, cmd->error_string);
}
- packet_flush(1);
+ packet_buf_flush(&buf);
+
+ if (use_sideband)
+ send_sideband(1, 1, buf.buf, buf.len, use_sideband);
+ else
+ safe_write(1, buf.buf, buf.len);
+ strbuf_release(&buf);
}
static int delete_only(struct command *cmd)
else if (0 <= receive_unpack_limit)
unpack_limit = receive_unpack_limit;
- capabilities_to_send = (prefer_ofs_delta) ?
- " report-status delete-refs ofs-delta " :
- " report-status delete-refs ";
-
if (advertise_refs || !stateless_rpc) {
add_alternate_refs();
write_head_info();
if (auto_update_server_info)
update_server_info(0);
}
+ if (use_sideband)
+ packet_flush(1);
return 0;
}
static int edit, no_replay, no_commit, mainline, signoff;
static enum { REVERT, CHERRY_PICK } action;
static struct commit *commit;
+static const char *commit_name;
static int allow_rerere_auto;
static const char *me;
const char * const * usage_str =
action == REVERT ? revert_usage : cherry_pick_usage;
unsigned char sha1[20];
- const char *arg;
int noop;
struct option options[] = {
OPT_BOOLEAN('n', "no-commit", &no_commit, "don't automatically commit"),
if (parse_options(argc, argv, NULL, options, usage_str, 0) != 1)
usage_with_options(usage_str, options);
- arg = argv[0];
- if (get_sha1(arg, sha1))
- die ("Cannot find '%s'", arg);
- commit = (struct commit *)parse_object(sha1);
+ commit_name = argv[0];
+ if (get_sha1(commit_name, sha1))
+ die ("Cannot find '%s'", commit_name);
+ commit = lookup_commit_reference(sha1);
if (!commit)
- die ("Could not find %s", sha1_to_hex(sha1));
- if (commit->object.type == OBJ_TAG) {
- commit = (struct commit *)
- deref_tag((struct object *)commit, arg, strlen(arg));
- }
- if (commit->object.type != OBJ_COMMIT)
- die ("'%s' does not point to a commit", arg);
+ exit(1);
}
static char *get_oneline(const char *message)
sha1_to_hex(commit->object.sha1));
}
-static char *help_msg(const unsigned char *sha1)
+static char *help_msg(const char *name)
{
- static char helpbuf[1024];
+ struct strbuf helpbuf = STRBUF_INIT;
char *msg = getenv("GIT_CHERRY_PICK_HELP");
if (msg)
return msg;
- strcpy(helpbuf, " After resolving the conflicts,\n"
- "mark the corrected paths with 'git add <paths>' "
- "or 'git rm <paths>' and commit the result.");
+ strbuf_addstr(&helpbuf, " After resolving the conflicts,\n"
+ "mark the corrected paths with 'git add <paths>' or 'git rm <paths>'\n"
+ "and commit the result");
if (action == CHERRY_PICK) {
- sprintf(helpbuf + strlen(helpbuf),
- "\nWhen commiting, use the option "
- "'-c %s' to retain authorship and message.",
- find_unique_abbrev(sha1, DEFAULT_ABBREV));
+ strbuf_addf(&helpbuf, " with: \n"
+ "\n"
+ " git commit -c %s\n",
+ name);
}
- return helpbuf;
+ else
+ strbuf_addch(&helpbuf, '.');
+ return strbuf_detach(&helpbuf, NULL);
}
static struct tree *empty_tree(void)
if (commit_lock_file(&msg_file) < 0)
die ("Error wrapping up %s", defmsg);
fprintf(stderr, "Automatic %s failed.%s\n",
- me, help_msg(commit->object.sha1));
+ me, help_msg(commit_name));
rerere(allow_rerere_auto);
exit(1);
}
strbuf_release(&buf);
}
+static int sideband_demux(int in, int out, void *data)
+{
+ int *fd = data;
+ int ret = recv_sideband("send-pack", fd[0], out);
+ close(out);
+ return ret;
+}
+
int send_pack(struct send_pack_args *args,
int fd[], struct child_process *conn,
struct ref *remote_refs,
struct strbuf req_buf = STRBUF_INIT;
struct ref *ref;
int new_refs;
- int ask_for_status_report = 0;
int allow_deleting_refs = 0;
- int expect_status_report = 0;
+ int status_report = 0;
+ int use_sideband = 0;
+ unsigned cmds_sent = 0;
int ret;
+ struct async demux;
/* Does the other end support the reporting? */
if (server_supports("report-status"))
- ask_for_status_report = 1;
+ status_report = 1;
if (server_supports("delete-refs"))
allow_deleting_refs = 1;
if (server_supports("ofs-delta"))
args->use_ofs_delta = 1;
+ if (server_supports("side-band-64k"))
+ use_sideband = 1;
if (!remote_refs) {
fprintf(stderr, "No refs in common and none specified; doing nothing.\n"
if (!ref->deletion)
new_refs++;
- if (!args->dry_run) {
+ if (args->dry_run) {
+ ref->status = REF_STATUS_OK;
+ } else {
char *old_hex = sha1_to_hex(ref->old_sha1);
char *new_hex = sha1_to_hex(ref->new_sha1);
- if (ask_for_status_report) {
- packet_buf_write(&req_buf, "%s %s %s%c%s",
+ if (!cmds_sent && (status_report || use_sideband)) {
+ packet_buf_write(&req_buf, "%s %s %s%c%s%s",
old_hex, new_hex, ref->name, 0,
- "report-status");
- ask_for_status_report = 0;
- expect_status_report = 1;
+ status_report ? " report-status" : "",
+ use_sideband ? " side-band-64k" : "");
}
else
packet_buf_write(&req_buf, "%s %s %s",
old_hex, new_hex, ref->name);
+ ref->status = status_report ?
+ REF_STATUS_EXPECTING_REPORT :
+ REF_STATUS_OK;
+ cmds_sent++;
}
- ref->status = expect_status_report ?
- REF_STATUS_EXPECTING_REPORT :
- REF_STATUS_OK;
}
if (args->stateless_rpc) {
- if (!args->dry_run) {
+ if (!args->dry_run && cmds_sent) {
packet_buf_flush(&req_buf);
send_sideband(out, -1, req_buf.buf, req_buf.len, LARGE_PACKET_MAX);
}
}
strbuf_release(&req_buf);
- if (new_refs && !args->dry_run) {
+ if (use_sideband && cmds_sent) {
+ memset(&demux, 0, sizeof(demux));
+ demux.proc = sideband_demux;
+ demux.data = fd;
+ demux.out = -1;
+ if (start_async(&demux))
+ die("receive-pack: unable to fork off sideband demultiplexer");
+ in = demux.out;
+ }
+
+ if (new_refs && cmds_sent) {
if (pack_objects(out, remote_refs, extra_have, args) < 0) {
for (ref = remote_refs; ref; ref = ref->next)
ref->status = REF_STATUS_NONE;
+ if (use_sideband)
+ finish_async(&demux);
return -1;
}
}
- if (args->stateless_rpc && !args->dry_run)
+ if (args->stateless_rpc && cmds_sent)
packet_flush(out);
- if (expect_status_report)
+ if (status_report && cmds_sent)
ret = receive_status(in, remote_refs);
else
ret = 0;
if (args->stateless_rpc)
packet_flush(out);
+ if (use_sideband && cmds_sent) {
+ if (finish_async(&demux)) {
+ error("error in sideband demultiplexer");
+ ret = -1;
+ }
+ close(demux.out);
+ }
+
if (ret < 0)
return ret;
for (ref = remote_refs; ref; ref = ref->next) {
return 0;
}
+static void add_wrapped_shortlog_msg(struct strbuf *sb, const char *s,
+ const struct shortlog *log)
+{
+ int col = strbuf_add_wrapped_text(sb, s, log->in1, log->in2, log->wrap);
+ if (col != log->wrap)
+ strbuf_addch(sb, '\n');
+}
+
void shortlog_output(struct shortlog *log)
{
int i, j;
+ struct strbuf sb = STRBUF_INIT;
+
if (log->sort_by_number)
qsort(log->list.items, log->list.nr, sizeof(struct string_list_item),
compare_by_number);
const char *msg = onelines->items[j].string;
if (log->wrap_lines) {
- int col = print_wrapped_text(msg, log->in1, log->in2, log->wrap);
- if (col != log->wrap)
- putchar('\n');
+ strbuf_reset(&sb);
+ add_wrapped_shortlog_msg(&sb, msg, log);
+ fwrite(sb.buf, sb.len, 1, stdout);
}
else
printf(" %s\n", msg);
log->list.items[i].util = NULL;
}
+ strbuf_release(&sb);
log->list.strdup_strings = 1;
string_list_clear(&log->list, 1);
clear_mailmap(&log->mailmap);
return config_error_nonbool(var);
/*
* default_arg is now passed to parse_options(), so we need to
- * mimick the real argv a bit better.
+ * mimic the real argv a bit better.
*/
if (!default_num) {
default_alloc = 20;
/*
* Copyright (C) 2009 Andrzej K. Haczewski <ahaczewski@gmail.com>
*
- * DISCLAMER: The implementation is Git-specific, it is subset of original
+ * DISCLAIMER: The implementation is Git-specific, it is subset of original
* Pthreads API, without lots of other features that Git doesn't use.
* Git also makes sure that the passed arguments are valid, so there's
* no need for double-checking.
/*
* Don't do destructive transforms with git:// as that
- * protocol code does '[]' dewrapping of its own.
+ * protocol code does '[]' unwrapping of its own.
*/
if (host[0] == '[') {
end = strchr(host + 1, ']');
elif file["type"] == "symlink":
mode = "120000"
# p4 print on a symlink contains "target\n", so strip it off
- last = contents.pop()
- last = last[:-1]
- contents.append(last)
+ data = ''.join(contents)
+ contents = [data[:-1]]
if self.isWindows and file["type"].endswith("text"):
mangled = []
Key and value strings may be enclosed in quotes, in which case
whitespace inside the quotes is preserved. Additionally, an equal
-sign may be included in the key by preceeding it with a backslash.
+sign may be included in the key by preceding it with a backslash.
For example:
"key1 "=value1
const char *cmd;
};
-static int filter_buffer(int fd, void *data)
+static int filter_buffer(int in, int out, void *data)
{
/*
* Spawn cmd and feed the buffer contents through its stdin.
child_process.argv = argv;
child_process.use_shell = 1;
child_process.in = -1;
- child_process.out = fd;
+ child_process.out = out;
if (start_command(&child_process))
return error("cannot fork to run external filter %s", params->cmd);
memset(&async, 0, sizeof(async));
async.proc = filter_buffer;
async.data = ¶ms;
+ async.out = -1;
params.src = src;
params.size = len;
params.cmd = cmd;
end = strchr(hostport, ']');
if (!end)
- die("Invalid reqeuest ('[' without ']')");
+ die("Invalid request ('[' without ']')");
*end = '\0';
*host = hostport + 1;
if (!end[1])
;
else if (!prefixcmp(arg, "--output=")) {
options->file = fopen(arg + strlen("--output="), "w");
+ if (!options->file)
+ die_errno("Could not open '%s'", arg + strlen("--output="));
options->close_file = 1;
} else
return 0;
separator++;
}
+ if (output_format & DIFF_FORMAT_NO_OUTPUT &&
+ DIFF_OPT_TST(options, EXIT_WITH_STATUS) &&
+ DIFF_OPT_TST(options, DIFF_FROM_CONTENTS)) {
+ /*
+ * run diff_flush_patch for the exit status. setting
+ * options->file to /dev/null should be safe, becaue we
+ * aren't supposed to produce any output anyway.
+ */
+ if (options->close_file)
+ fclose(options->file);
+ options->file = fopen("/dev/null", "w");
+ if (!options->file)
+ die_errno("Could not open /dev/null");
+ options->close_file = 1;
+ for (i = 0; i < q->nr; i++) {
+ struct diff_filepair *p = q->queue[i];
+ if (check_pair_status(p))
+ diff_flush_patch(p, options);
+ if (options->found_changes)
+ break;
+ }
+ }
+
if (output_format & DIFF_FORMAT_PATCH) {
if (separator) {
putc(options->line_termination, options->file);
struct diff_filepair *p = q->queue[i];
/*
- * 1. Entries that come from stat info dirtyness
+ * 1. Entries that come from stat info dirtiness
* always have both sides (iow, not create/delete),
* one side of the object name is unknown, with
* the same mode and size. Keep the ones that
slash = dirs + (slash - name);
do {
*slash = '\0';
- } while (rmdir(dirs) && (slash = strrchr(dirs, '/')));
+ } while (rmdir(dirs) == 0 && (slash = strrchr(dirs, '/')));
free(dirs);
}
return 0;
struct object_entry
{
+ struct pack_idx_entry idx;
struct object_entry *next;
- uint32_t offset;
uint32_t type : TYPE_BITS,
pack_id : PACK_ID_BITS,
depth : DEPTH_BITS;
- unsigned char sha1[20];
};
struct object_entry_pool
struct last_object
{
struct strbuf data;
- uint32_t offset;
+ off_t offset;
unsigned int depth;
unsigned no_swap : 1;
};
/* Configured limits on output */
static unsigned long max_depth = 10;
-static off_t max_packsize = (1LL << 32) - 1;
+static off_t max_packsize;
static uintmax_t big_file_threshold = 512 * 1024 * 1024;
static int force_update;
static int pack_compression_level = Z_DEFAULT_COMPRESSION;
/* The .pack file being generated */
static unsigned int pack_id;
+static struct sha1file *pack_file;
static struct packed_git *pack_data;
static struct packed_git **all_packs;
-static unsigned long pack_size;
+static off_t pack_size;
/* Table of objects we've written. */
static unsigned int object_entry_alloc = 5000;
alloc_objects(object_entry_alloc);
e = blocks->next_free++;
- hashcpy(e->sha1, sha1);
+ hashcpy(e->idx.sha1, sha1);
return e;
}
unsigned int h = sha1[0] << 8 | sha1[1];
struct object_entry *e;
for (e = object_table[h]; e; e = e->next)
- if (!hashcmp(sha1, e->sha1))
+ if (!hashcmp(sha1, e->idx.sha1))
return e;
return NULL;
}
struct object_entry *p = NULL;
while (e) {
- if (!hashcmp(sha1, e->sha1))
+ if (!hashcmp(sha1, e->idx.sha1))
return e;
p = e;
e = e->next;
e = new_object(sha1);
e->next = NULL;
- e->offset = 0;
+ e->idx.offset = 0;
if (p)
p->next = e;
else
p = xcalloc(1, sizeof(*p) + strlen(tmpfile) + 2);
strcpy(p->pack_name, tmpfile);
p->pack_fd = pack_fd;
+ pack_file = sha1fd(pack_fd, p->pack_name);
hdr.hdr_signature = htonl(PACK_SIGNATURE);
hdr.hdr_version = htonl(2);
hdr.hdr_entries = 0;
- write_or_die(p->pack_fd, &hdr, sizeof(hdr));
+ sha1write(pack_file, &hdr, sizeof(hdr));
pack_data = p;
pack_size = sizeof(hdr);
all_packs[pack_id] = p;
}
-static int oecmp (const void *a_, const void *b_)
-{
- struct object_entry *a = *((struct object_entry**)a_);
- struct object_entry *b = *((struct object_entry**)b_);
- return hashcmp(a->sha1, b->sha1);
-}
-
-static char *create_index(void)
+static const char *create_index(void)
{
- static char tmpfile[PATH_MAX];
- git_SHA_CTX ctx;
- struct sha1file *f;
- struct object_entry **idx, **c, **last, *e;
+ const char *tmpfile;
+ struct pack_idx_entry **idx, **c, **last;
+ struct object_entry *e;
struct object_entry_pool *o;
- uint32_t array[256];
- int i, idx_fd;
- /* Build the sorted table of object IDs. */
- idx = xmalloc(object_count * sizeof(struct object_entry*));
+ /* Build the table of object IDs. */
+ idx = xmalloc(object_count * sizeof(*idx));
c = idx;
for (o = blocks; o; o = o->next_pool)
for (e = o->next_free; e-- != o->entries;)
if (pack_id == e->pack_id)
- *c++ = e;
+ *c++ = &e->idx;
last = idx + object_count;
if (c != last)
die("internal consistency error creating the index");
- qsort(idx, object_count, sizeof(struct object_entry*), oecmp);
- /* Generate the fan-out array. */
- c = idx;
- for (i = 0; i < 256; i++) {
- struct object_entry **next = c;
- while (next < last) {
- if ((*next)->sha1[0] != i)
- break;
- next++;
- }
- array[i] = htonl(next - idx);
- c = next;
- }
-
- idx_fd = odb_mkstemp(tmpfile, sizeof(tmpfile),
- "pack/tmp_idx_XXXXXX");
- f = sha1fd(idx_fd, tmpfile);
- sha1write(f, array, 256 * sizeof(int));
- git_SHA1_Init(&ctx);
- for (c = idx; c != last; c++) {
- uint32_t offset = htonl((*c)->offset);
- sha1write(f, &offset, 4);
- sha1write(f, (*c)->sha1, sizeof((*c)->sha1));
- git_SHA1_Update(&ctx, (*c)->sha1, 20);
- }
- sha1write(f, pack_data->sha1, sizeof(pack_data->sha1));
- sha1close(f, NULL, CSUM_FSYNC);
+ tmpfile = write_idx_file(NULL, idx, object_count, pack_data->sha1);
free(idx);
- git_SHA1_Final(pack_data->sha1, &ctx);
return tmpfile;
}
-static char *keep_pack(char *curr_index_name)
+static char *keep_pack(const char *curr_index_name)
{
static char name[PATH_MAX];
static const char *keep_msg = "fast-import";
get_object_directory(), sha1_to_hex(pack_data->sha1));
if (move_temp_to_file(curr_index_name, name))
die("cannot store index file");
+ free((void *)curr_index_name);
return name;
}
clear_delta_base_cache();
if (object_count) {
+ unsigned char cur_pack_sha1[20];
char *idx_name;
int i;
struct branch *b;
struct tag *t;
close_pack_windows(pack_data);
+ sha1close(pack_file, cur_pack_sha1, 0);
fixup_pack_header_footer(pack_data->pack_fd, pack_data->sha1,
pack_data->pack_name, object_count,
- NULL, 0);
+ cur_pack_sha1, pack_size);
close(pack_data->pack_fd);
idx_name = keep_pack(create_index());
e = insert_object(sha1);
if (mark)
insert_mark(mark, e);
- if (e->offset) {
+ if (e->idx.offset) {
duplicate_count_by_type[type]++;
return 1;
} else if (find_sha1_pack(sha1, packed_git)) {
e->type = type;
e->pack_id = MAX_PACK_ID;
- e->offset = 1; /* just not zero! */
+ e->idx.offset = 1; /* just not zero! */
duplicate_count_by_type[type]++;
return 1;
}
- if (last && last->data.buf && last->depth < max_depth) {
+ if (last && last->data.buf && last->depth < max_depth && dat->len > 20) {
delta = diff_delta(last->data.buf, last->data.len,
dat->buf, dat->len,
- &deltalen, 0);
- if (delta && deltalen >= dat->len) {
- free(delta);
- delta = NULL;
- }
+ &deltalen, dat->len - 20);
} else
delta = NULL;
deflateEnd(&s);
/* Determine if we should auto-checkpoint. */
- if ((pack_size + 60 + s.total_out) > max_packsize
+ if ((max_packsize && (pack_size + 60 + s.total_out) > max_packsize)
|| (pack_size + 60 + s.total_out) < pack_size) {
/* This new object needs to *not* have the current pack_id. */
e->type = type;
e->pack_id = pack_id;
- e->offset = pack_size;
+ e->idx.offset = pack_size;
object_count++;
object_count_by_type[type]++;
+ crc32_begin(pack_file);
+
if (delta) {
- unsigned long ofs = e->offset - last->offset;
+ off_t ofs = e->idx.offset - last->offset;
unsigned pos = sizeof(hdr) - 1;
delta_count_by_type[type]++;
e->depth = last->depth + 1;
hdrlen = encode_header(OBJ_OFS_DELTA, deltalen, hdr);
- write_or_die(pack_data->pack_fd, hdr, hdrlen);
+ sha1write(pack_file, hdr, hdrlen);
pack_size += hdrlen;
hdr[pos] = ofs & 127;
while (ofs >>= 7)
hdr[--pos] = 128 | (--ofs & 127);
- write_or_die(pack_data->pack_fd, hdr + pos, sizeof(hdr) - pos);
+ sha1write(pack_file, hdr + pos, sizeof(hdr) - pos);
pack_size += sizeof(hdr) - pos;
} else {
e->depth = 0;
hdrlen = encode_header(type, dat->len, hdr);
- write_or_die(pack_data->pack_fd, hdr, hdrlen);
+ sha1write(pack_file, hdr, hdrlen);
pack_size += hdrlen;
}
- write_or_die(pack_data->pack_fd, out, s.total_out);
+ sha1write(pack_file, out, s.total_out);
pack_size += s.total_out;
+ e->idx.crc32 = crc32_end(pack_file);
+
free(out);
free(delta);
if (last) {
} else {
strbuf_swap(&last->data, dat);
}
- last->offset = e->offset;
+ last->offset = e->idx.offset;
last->depth = e->depth;
}
return 0;
}
-static void truncate_pack(off_t to)
+static void truncate_pack(off_t to, git_SHA_CTX *ctx)
{
if (ftruncate(pack_data->pack_fd, to)
|| lseek(pack_data->pack_fd, to, SEEK_SET) != to)
die_errno("cannot truncate pack to skip duplicate");
pack_size = to;
+
+ /* yes this is a layering violation */
+ pack_file->total = to;
+ pack_file->offset = 0;
+ pack_file->ctx = *ctx;
}
static void stream_blob(uintmax_t len, unsigned char *sha1out, uintmax_t mark)
unsigned long hdrlen;
off_t offset;
git_SHA_CTX c;
+ git_SHA_CTX pack_file_ctx;
z_stream s;
int status = Z_OK;
/* Determine if we should auto-checkpoint. */
- if ((pack_size + 60 + len) > max_packsize
+ if ((max_packsize && (pack_size + 60 + len) > max_packsize)
|| (pack_size + 60 + len) < pack_size)
cycle_packfile();
offset = pack_size;
+ /* preserve the pack_file SHA1 ctx in case we have to truncate later */
+ sha1flush(pack_file);
+ pack_file_ctx = pack_file->ctx;
+
hdrlen = snprintf((char *)out_buf, out_sz, "blob %" PRIuMAX, len) + 1;
if (out_sz <= hdrlen)
die("impossibly large object header");
git_SHA1_Init(&c);
git_SHA1_Update(&c, out_buf, hdrlen);
+ crc32_begin(pack_file);
+
memset(&s, 0, sizeof(s));
deflateInit(&s, pack_compression_level);
if (!s.avail_out || status == Z_STREAM_END) {
size_t n = s.next_out - out_buf;
- write_or_die(pack_data->pack_fd, out_buf, n);
+ sha1write(pack_file, out_buf, n);
pack_size += n;
s.next_out = out_buf;
s.avail_out = out_sz;
if (mark)
insert_mark(mark, e);
- if (e->offset) {
+ if (e->idx.offset) {
duplicate_count_by_type[OBJ_BLOB]++;
- truncate_pack(offset);
+ truncate_pack(offset, &pack_file_ctx);
} else if (find_sha1_pack(sha1, packed_git)) {
e->type = OBJ_BLOB;
e->pack_id = MAX_PACK_ID;
- e->offset = 1; /* just not zero! */
+ e->idx.offset = 1; /* just not zero! */
duplicate_count_by_type[OBJ_BLOB]++;
- truncate_pack(offset);
+ truncate_pack(offset, &pack_file_ctx);
} else {
e->depth = 0;
e->type = OBJ_BLOB;
e->pack_id = pack_id;
- e->offset = offset;
+ e->idx.offset = offset;
+ e->idx.crc32 = crc32_end(pack_file);
object_count++;
object_count_by_type[OBJ_BLOB]++;
}
* the newly written data.
*/
close_pack_windows(p);
+ sha1flush(pack_file);
/* We have to offer 20 bytes additional on the end of
* the packfile as the core unpacker code assumes the
*/
p->pack_size = pack_size + 20;
}
- return unpack_entry(p, oe->offset, &type, sizep);
+ return unpack_entry(p, oe->idx.offset, &type, sizep);
}
static const char *get_mode(const char *str, uint16_t *modep)
if (S_ISDIR(root->versions[0].mode) && le && le->pack_id == pack_id) {
mktree(t, 0, &old_tree);
lo.data = old_tree;
- lo.offset = le->offset;
+ lo.offset = le->idx.offset;
lo.depth = t->delta_depth;
}
for (k = 0; k < 1024; k++) {
if (m->data.marked[k])
fprintf(f, ":%" PRIuMAX " %s\n", base + k,
- sha1_to_hex(m->data.marked[k]->sha1));
+ sha1_to_hex(m->data.marked[k]->idx.sha1));
}
}
}
e = insert_object(sha1);
e->type = type;
e->pack_id = MAX_PACK_ID;
- e->offset = 1; /* just not zero! */
+ e->idx.offset = 1; /* just not zero! */
}
insert_mark(mark, e);
}
if (*p == ':') {
char *x;
oe = find_mark(strtoumax(p + 1, &x, 10));
- hashcpy(sha1, oe->sha1);
+ hashcpy(sha1, oe->idx.sha1);
p = x;
} else if (!prefixcmp(p, "inline")) {
inline_data = 1;
if (*p == ':') {
char *x;
oe = find_mark(strtoumax(p + 1, &x, 10));
- hashcpy(sha1, oe->sha1);
+ hashcpy(sha1, oe->idx.sha1);
p = x;
} else if (!prefixcmp(p, "inline")) {
inline_data = 1;
struct object_entry *commit_oe = find_mark(commit_mark);
if (commit_oe->type != OBJ_COMMIT)
die("Mark :%" PRIuMAX " not a commit", commit_mark);
- hashcpy(commit_sha1, commit_oe->sha1);
+ hashcpy(commit_sha1, commit_oe->idx.sha1);
} else if (!get_sha1(p, commit_sha1)) {
unsigned long size;
char *buf = read_object_with_reference(commit_sha1,
struct object_entry *oe = find_mark(idnum);
if (oe->type != OBJ_COMMIT)
die("Mark :%" PRIuMAX " not a commit", idnum);
- hashcpy(b->sha1, oe->sha1);
+ hashcpy(b->sha1, oe->idx.sha1);
if (oe->pack_id != MAX_PACK_ID) {
unsigned long size;
char *buf = gfi_unpack_entry(oe, &size);
struct object_entry *oe = find_mark(idnum);
if (oe->type != OBJ_COMMIT)
die("Mark :%" PRIuMAX " not a commit", idnum);
- hashcpy(n->sha1, oe->sha1);
+ hashcpy(n->sha1, oe->idx.sha1);
} else if (!get_sha1(from, n->sha1)) {
unsigned long size;
char *buf = read_object_with_reference(n->sha1,
from_mark = strtoumax(from + 1, NULL, 10);
oe = find_mark(from_mark);
type = oe->type;
- hashcpy(sha1, oe->sha1);
+ hashcpy(sha1, oe->idx.sha1);
} else if (!get_sha1(from, sha1)) {
unsigned long size;
char *buf;
pack_compression_seen = 1;
return 0;
}
+ if (!strcmp(k, "pack.indexversion")) {
+ pack_idx_default_version = git_config_int(k, v);
+ if (pack_idx_default_version > 2)
+ die("bad pack.indexversion=%"PRIu32,
+ pack_idx_default_version);
+ return 0;
+ }
+ if (!strcmp(k, "pack.packsizelimit")) {
+ max_packsize = git_config_ulong(k, v);
+ return 0;
+ }
if (!strcmp(k, "core.bigfilethreshold")) {
long n = git_config_int(k, v);
big_file_threshold = 0 < n ? n : 0;
go_next
done
-git gc --auto
-
rm -fr "$dotest"
+git gc --auto
}
require_work_tree () {
- test $(git rev-parse --is-inside-work-tree) = true ||
+ test "$(git rev-parse --is-inside-work-tree 2>/dev/null)" = true ||
die "fatal: $0 cannot be used without a working tree."
}
}
apply_stash () {
+ applied_stash=
unstash_index=
while test $# != 0
if test $# = 0
then
have_stash || die 'Nothing to apply'
+ applied_stash="$ref_stash@{0}"
+ else
+ applied_stash="$*"
fi
# stash records the work tree, and is a merge between the
shift
if apply_stash "$@"
then
- test -z "$unstash_index" || shift
- drop_stash "$@"
+ drop_stash "$applied_stash"
fi
;;
branch)
break;
if (was_alias) {
fprintf(stderr, "Expansion of alias '%s' failed; "
- "'%s' is not a git-command\n",
+ "'%s' is not a git command\n",
cmd, argv[0]);
exit(1);
}
repositories, you can configure apache like this:
<VirtualHost *:80>
- ServerName git.example.org
- DocumentRoot /pub/git
- SetEnv GITWEB_CONFIG /etc/gitweb.conf
+ ServerName git.example.org
+ DocumentRoot /pub/git
+ SetEnv GITWEB_CONFIG /etc/gitweb.conf
+
+ # turning on mod rewrite
RewriteEngine on
+
# make the front page an internal rewrite to the gitweb script
RewriteRule ^/$ /cgi-bin/gitweb.cgi
+
# make access for "dumb clients" work
RewriteRule ^/(.*\.git/(?!/?(HEAD|info|objects|refs)).*)?$ /cgi-bin/gitweb.cgi%{REQUEST_URI} [L,PT]
</VirtualHost>
$home_link = "/";
+Webserver configuration with multiple projects' root
+----------------------------------------------------
+
+If you want to use gitweb with several project roots you can edit your apache
+virtual host and gitweb.conf configuration files like this :
+
+virtual host configuration :
+
+<VirtualHost *:80>
+ ServerName git.example.org
+ DocumentRoot /pub/git
+ SetEnv GITWEB_CONFIG /etc/gitweb.conf
+
+ # turning on mod rewrite
+ RewriteEngine on
+
+ # make the front page an internal rewrite to the gitweb script
+ RewriteRule ^/$ /cgi-bin/gitweb.cgi [QSA,L,PT]
+
+ # look for a public_git folder in unix users' home
+ # http://git.example.org/~<user>/
+ RewriteRule ^/\~([^\/]+)(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT]
+
+ # http://git.example.org/+<user>/
+ #RewriteRule ^/\+([^\/]+)(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT]
+
+ # http://git.example.org/user/<user>/
+ #RewriteRule ^/user/([^\/]+)/(gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT]
+
+ # defined list of project roots
+ RewriteRule ^/scm(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/pub/scm/,L,PT]
+ RewriteRule ^/var(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi [QSA,E=GITWEB_PROJECTROOT:/var/git/,L,PT]
+
+ # make access for "dumb clients" work
+ RewriteRule ^/(.*\.git/(?!/?(HEAD|info|objects|refs)).*)?$ /cgi-bin/gitweb.cgi%{REQUEST_URI} [L,PT]
+</VirtualHost>
+
+gitweb.conf configuration :
+
+$projectroot = $ENV{'GITWEB_PROJECTROOT'} || "/pub/git";
+
+These configurations enable two things. First, each unix user (<user>) of the
+server will be able to browse through gitweb git repositories found in
+~/public_git/ with the following url : http://git.example.org/~<user>/
+
+If you do not want this feature on your server just remove the second rewrite rule.
+
+If you already use mod_userdir in your virtual host or you don't want to use
+the '~' as first character just comment or remove the second rewrite rule and
+uncomment one of the following according to what you want.
+
+Second, repositories found in /pub/scm/ and /var/git/ will be accesible
+through http://git.example.org/scm/ and http://git.example.org/var/.
+You can add as many project roots as you want by adding rewrite rules like the
+third and the fourth.
+
+
PATH_INFO usage
-----------------------
If you enable PATH_INFO usage in gitweb by putting
$feature{$name}{'sub'},
$feature{$name}{'override'},
@{$feature{$name}{'default'}});
- if (!$override) { return @defaults; }
+ # project specific override is possible only if we have project
+ our $git_dir; # global variable, declared later
+ if (!$override || !defined $git_dir) {
+ return @defaults;
+ }
if (!defined $sub) {
warn "feature $name is not overridable";
return @defaults;
sub git_get_project_config {
my ($key, $type) = @_;
+ # do we have project
+ return unless (defined $project && defined $git_dir);
+
# key sanity check
return unless ($key);
$key =~ s/^gitweb\.//;
return assumed;
}
- fprintf(stderr, "git: '%s' is not a git-command. See 'git --help'.\n", cmd);
+ fprintf(stderr, "git: '%s' is not a git command. See 'git --help'.\n", cmd);
if (SIMILAR_ENOUGH(best_similarity)) {
fprintf(stderr, "\nDid you mean %s?\n",
char *data;
int len;
unsigned char flags;
- unsigned int crlf:1;
};
static const char imap_send_usage[] = "git imap-send < <mbox>";
return d;
}
+static void lf_to_crlf(struct msg_data *msg)
+{
+ char *new;
+ int i, j, lfnum = 0;
+
+ if (msg->data[0] == '\n')
+ lfnum++;
+ for (i = 1; i < msg->len; i++) {
+ if (msg->data[i - 1] != '\r' && msg->data[i] == '\n')
+ lfnum++;
+ }
+
+ new = xmalloc(msg->len + lfnum);
+ if (msg->data[0] == '\n') {
+ new[0] = '\r';
+ new[1] = '\n';
+ i = 1;
+ j = 2;
+ } else {
+ new[0] = msg->data[0];
+ i = 1;
+ j = 1;
+ }
+ for ( ; i < msg->len; i++) {
+ if (msg->data[i] != '\n') {
+ new[j++] = msg->data[i];
+ continue;
+ }
+ if (msg->data[i - 1] != '\r')
+ new[j++] = '\r';
+ /* otherwise it already had CR before */
+ new[j++] = '\n';
+ }
+ msg->len += lfnum;
+ free(msg->data);
+ msg->data = new;
+}
+
static int imap_store_msg(struct store *gctx, struct msg_data *data)
{
struct imap_store *ctx = (struct imap_store *)gctx;
int ret, d;
char flagstr[128];
+ lf_to_crlf(data);
memset(&cb, 0, sizeof(cb));
cb.dlen = data->len;
#define LEVENSHTEIN_H
int levenshtein(const char *string1, const char *string2,
- int swap_penalty, int substition_penalty,
+ int swap_penalty, int substitution_penalty,
int insertion_penalty, int deletion_penalty);
#endif
/*
* This resurrects the belts and suspenders paranoia check by HPA
* done in <435560F7.4080006@zytor.com> thread, now enter_repo()
- * does not do getcwd() based path canonicalizations.
+ * does not do getcwd() based path canonicalization.
*
* sl becomes true immediately after seeing '/' and continues to
* be true as long as dots continue after that without intervening
$dir = $opts{Directory};
unless (-d "$dir/refs" and -d "$dir/objects" and -e "$dir/HEAD") {
- # Mimick git-rev-parse --git-dir error message:
+ # Mimic git-rev-parse --git-dir error message:
throw Error::Simple("fatal: Not a git repository: $dir");
}
my $search = Git->repository(Repository => $dir);
try {
$search->command('symbolic-ref', 'HEAD');
} catch Git::Error::Command with {
- # Mimick git-rev-parse --git-dir error message:
+ # Mimic git-rev-parse --git-dir error message:
throw Error::Simple("fatal: Not a git repository: $dir");
}
has_glob_specials = strpbrk(pattern, "?*[");
if (!has_glob_specials) {
- /* Append impiled '/' '*' if not present. */
+ /* Append implied '/' '*' if not present. */
if (real_pattern.buf[real_pattern.len - 1] != '/')
strbuf_addch(&real_pattern, '/');
/* No need to check for '*', there is none. */
return last;
}
-static int write_discovery(int fd, void *data)
+static int write_discovery(int in, int out, void *data)
{
struct discovery *heads = data;
int err = 0;
- if (write_in_full(fd, heads->buf, heads->len) != heads->len)
+ if (write_in_full(out, heads->buf, heads->len) != heads->len)
err = 1;
- close(fd);
+ close(out);
return err;
}
memset(&async, 0, sizeof(async));
async.proc = write_discovery;
async.data = heads;
+ async.out = -1;
if (start_async(&async))
die("cannot start thread to parse advertised refs");
static int merge(const char *name, const char *path)
{
int ret;
- mmfile_t cur, base, other;
+ mmfile_t cur = {NULL, 0}, base = {NULL, 0}, other = {NULL, 0};
mmbuffer_t result = {NULL, 0};
if (handle_file(path, NULL, rerere_path(name, "thisimage")) < 0)
if (read_mmfile(&cur, rerere_path(name, "thisimage")) ||
read_mmfile(&base, rerere_path(name, "preimage")) ||
- read_mmfile(&other, rerere_path(name, "postimage")))
- return 1;
+ read_mmfile(&other, rerere_path(name, "postimage"))) {
+ ret = 1;
+ goto out;
+ }
ret = ll_merge(&result, path, &base, &cur, "", &other, "", 0);
if (!ret) {
FILE *f = fopen(path, "w");
strerror(errno));
}
+out:
free(cur.ptr);
free(base.ptr);
free(other.ptr);
right_count++;
}
+ if (!left_count || !right_count)
+ return;
+
left_first = left_count < right_count;
init_patch_ids(&ids);
if (revs->diffopt.nr_paths) {
else if (need_err) {
dup2(fderr[1], 2);
close_pair(fderr);
+ } else if (cmd->err > 1) {
+ dup2(cmd->err, 2);
+ close(cmd->err);
}
if (cmd->no_stdout)
fherr = open("/dev/null", O_RDWR);
else if (need_err)
fherr = dup(fderr[1]);
+ else if (cmd->err > 2)
+ fherr = dup(cmd->err);
if (cmd->no_stdout)
fhout = open("/dev/null", O_RDWR);
if (need_err)
close(fderr[1]);
+ else if (cmd->err)
+ close(cmd->err);
return 0;
}
static unsigned __stdcall run_thread(void *data)
{
struct async *async = data;
- return async->proc(async->fd_for_proc, async->data);
+ return async->proc(async->proc_in, async->proc_out, async->data);
}
#endif
int start_async(struct async *async)
{
- int pipe_out[2];
+ int need_in, need_out;
+ int fdin[2], fdout[2];
+ int proc_in, proc_out;
- if (pipe(pipe_out) < 0)
- return error("cannot create pipe: %s", strerror(errno));
- async->out = pipe_out[0];
+ need_in = async->in < 0;
+ if (need_in) {
+ if (pipe(fdin) < 0) {
+ if (async->out > 0)
+ close(async->out);
+ return error("cannot create pipe: %s", strerror(errno));
+ }
+ async->in = fdin[1];
+ }
+
+ need_out = async->out < 0;
+ if (need_out) {
+ if (pipe(fdout) < 0) {
+ if (need_in)
+ close_pair(fdin);
+ else if (async->in)
+ close(async->in);
+ return error("cannot create pipe: %s", strerror(errno));
+ }
+ async->out = fdout[0];
+ }
+
+ if (need_in)
+ proc_in = fdin[0];
+ else if (async->in)
+ proc_in = async->in;
+ else
+ proc_in = -1;
+
+ if (need_out)
+ proc_out = fdout[1];
+ else if (async->out)
+ proc_out = async->out;
+ else
+ proc_out = -1;
#ifndef WIN32
/* Flush stdio before fork() to avoid cloning buffers */
async->pid = fork();
if (async->pid < 0) {
error("fork (async) failed: %s", strerror(errno));
- close_pair(pipe_out);
- return -1;
+ goto error;
}
if (!async->pid) {
- close(pipe_out[0]);
- exit(!!async->proc(pipe_out[1], async->data));
+ if (need_in)
+ close(fdin[1]);
+ if (need_out)
+ close(fdout[0]);
+ exit(!!async->proc(proc_in, proc_out, async->data));
}
- close(pipe_out[1]);
+
+ if (need_in)
+ close(fdin[0]);
+ else if (async->in)
+ close(async->in);
+
+ if (need_out)
+ close(fdout[1]);
+ else if (async->out)
+ close(async->out);
#else
- async->fd_for_proc = pipe_out[1];
+ async->proc_in = proc_in;
+ async->proc_out = proc_out;
async->tid = (HANDLE) _beginthreadex(NULL, 0, run_thread, async, 0, NULL);
if (!async->tid) {
error("cannot create thread: %s", strerror(errno));
- close_pair(pipe_out);
- return -1;
+ goto error;
}
#endif
return 0;
+
+error:
+ if (need_in)
+ close_pair(fdin);
+ else if (async->in)
+ close(async->in);
+
+ if (need_out)
+ close_pair(fdout);
+ else if (async->out)
+ close(async->out);
+ return -1;
}
int finish_async(struct async *async)
* - Specify > 0 to set a channel to a particular FD as follows:
* .in: a readable FD, becomes child's stdin
* .out: a writable FD, becomes child's stdout/stderr
- * .err > 0 not supported
+ * .err: a writable FD, becomes child's stderr
* The specified FD is closed by start_command(), even in case
* of errors!
*/
*/
struct async {
/*
- * proc writes to fd and closes it;
+ * proc reads from in; closes it before return
+ * proc writes to out; closes it before return
* returns 0 on success, non-zero on failure
*/
- int (*proc)(int fd, void *data);
+ int (*proc)(int in, int out, void *data);
void *data;
+ int in; /* caller writes here and closes it */
int out; /* caller reads from here and closes it */
#ifndef WIN32
pid_t pid;
#else
HANDLE tid;
- int fd_for_proc;
+ int proc_in;
+ int proc_out;
#endif
};
}
/*
- * set_work_tree() is only ever called if you set GIT_DIR explicitely.
+ * set_work_tree() is only ever called if you set GIT_DIR explicitly.
* The old behaviour (which we retain here) is to set the work tree root
* to the cwd, unless overridden by the config, the command line, or
* GIT_WORK_TREE.
void *buf, unsigned long len, time_t mtime)
{
int fd, ret;
- size_t size;
- unsigned char *compressed;
+ unsigned char compressed[4096];
z_stream stream;
+ git_SHA_CTX c;
+ unsigned char parano_sha1[20];
char *filename;
static char tmpfile[PATH_MAX];
/* Set it up */
memset(&stream, 0, sizeof(stream));
deflateInit(&stream, zlib_compression_level);
- size = 8 + deflateBound(&stream, len+hdrlen);
- compressed = xmalloc(size);
-
- /* Compress it */
stream.next_out = compressed;
- stream.avail_out = size;
+ stream.avail_out = sizeof(compressed);
+ git_SHA1_Init(&c);
/* First header.. */
stream.next_in = (unsigned char *)hdr;
stream.avail_in = hdrlen;
while (deflate(&stream, 0) == Z_OK)
/* nothing */;
+ git_SHA1_Update(&c, hdr, hdrlen);
/* Then the data itself.. */
stream.next_in = buf;
stream.avail_in = len;
- ret = deflate(&stream, Z_FINISH);
+ do {
+ unsigned char *in0 = stream.next_in;
+ ret = deflate(&stream, Z_FINISH);
+ git_SHA1_Update(&c, in0, stream.next_in - in0);
+ if (write_buffer(fd, compressed, stream.next_out - compressed) < 0)
+ die("unable to write sha1 file");
+ stream.next_out = compressed;
+ stream.avail_out = sizeof(compressed);
+ } while (ret == Z_OK);
+
if (ret != Z_STREAM_END)
die("unable to deflate new object %s (%d)", sha1_to_hex(sha1), ret);
-
ret = deflateEnd(&stream);
if (ret != Z_OK)
die("deflateEnd on object %s failed (%d)", sha1_to_hex(sha1), ret);
+ git_SHA1_Final(parano_sha1, &c);
+ if (hashcmp(sha1, parano_sha1) != 0)
+ die("confused by unstable object source data for %s", sha1_to_hex(sha1));
- size = stream.total_out;
-
- if (write_buffer(fd, compressed, size) < 0)
- die("unable to write sha1 file");
close_sha1_file(fd);
- free(compressed);
if (mtime) {
struct utimbuf utb;
return ret;
}
+#define SMALL_FILE_SIZE (32*1024)
+
int index_fd(unsigned char *sha1, int fd, struct stat *st, int write_object,
enum object_type type, const char *path)
{
else
ret = -1;
strbuf_release(&sbuf);
+ } else if (size <= SMALL_FILE_SIZE) {
+ char *buf = xmalloc(size);
+ if (size == read_in_full(fd, buf, size))
+ ret = index_mem(sha1, buf, size, write_object, type,
+ path);
+ else
+ ret = error("short read %s", strerror(errno));
+ free(buf);
} else if (size) {
void *buf = xmmap(NULL, size, PROT_READ, MAP_PRIVATE, fd, 0);
ret = index_mem(sha1, buf, size, write_object, type, path);
*ref = xstrdup(r);
if (!warn_ambiguous_refs)
break;
- } else if ((flag & REF_ISSYMREF) &&
- (len != 4 || strcmp(str, "HEAD")))
+ } else if ((flag & REF_ISSYMREF) && strcmp(fullref, "HEAD"))
warning("ignoring dangling symref %s.", fullref);
}
free(last_branch);
pos = cache_name_pos(filename, namelen);
if (pos < 0)
pos = -pos - 1;
- ce = active_cache[pos];
- if (ce_namelen(ce) == namelen &&
- !memcmp(ce->name, filename, namelen))
- die("Path '%s' is in the index, but not at stage %d.\n"
- "Did you mean ':%d:%s'?",
- filename, stage,
- ce_stage(ce), filename);
+ if (pos < active_nr) {
+ ce = active_cache[pos];
+ if (ce_namelen(ce) == namelen &&
+ !memcmp(ce->name, filename, namelen))
+ die("Path '%s' is in the index, but not at stage %d.\n"
+ "Did you mean ':%d:%s'?",
+ filename, stage,
+ ce_stage(ce), filename);
+ }
/* Confusion between relative and absolute filenames? */
fullnamelen = namelen + strlen(prefix);
pos = cache_name_pos(fullname, fullnamelen);
if (pos < 0)
pos = -pos - 1;
- ce = active_cache[pos];
- if (ce_namelen(ce) == fullnamelen &&
- !memcmp(ce->name, fullname, fullnamelen))
- die("Path '%s' is in the index, but not '%s'.\n"
- "Did you mean ':%d:%s'?",
- fullname, filename,
- ce_stage(ce), fullname);
+ if (pos < active_nr) {
+ ce = active_cache[pos];
+ if (ce_namelen(ce) == fullnamelen &&
+ !memcmp(ce->name, fullname, fullnamelen))
+ die("Path '%s' is in the index, but not '%s'.\n"
+ "Did you mean ':%d:%s'?",
+ fullname, filename,
+ ce_stage(ce), fullname);
+ }
if (!lstat(filename, &st))
die("Path '%s' exists on disk, but not in the index.", filename);
+: included from t2016 and others
+
. ./test-lib.sh
if ! test_have_prereq PERL; then
This is an invalid tag.
EOF
-test_expect_failure 'tag pointing to nonexistent' '
- tag=$(git hash-object -w --stdin < invalid-tag) &&
+test_expect_success 'tag pointing to nonexistent' '
+ tag=$(git hash-object -t tag -w --stdin < invalid-tag) &&
echo $tag > .git/refs/tags/invalid &&
- git fsck --tags 2>out &&
+ test_must_fail git fsck --tags >out &&
cat out &&
- grep "could not load tagged object" out &&
+ grep "broken link" out &&
rm .git/refs/tags/invalid
'
This is an invalid tag.
EOF
-test_expect_failure 'tag pointing to something else than its type' '
- tag=$(git hash-object -w --stdin < wrong-tag) &&
+test_expect_success 'tag pointing to something else than its type' '
+ tag=$(git hash-object -t tag -w --stdin < wrong-tag) &&
echo $tag > .git/refs/tags/wrong &&
- git fsck --tags 2>out &&
+ test_must_fail git fsck --tags 2>out &&
cat out &&
- grep "some sane error message" out &&
+ grep "error in tag.*broken links" out &&
rm .git/refs/tags/wrong
'
. ./test-lib.sh
cat > fake_editor.sh << \EOF
+#!/bin/sh
echo "$MSG" > "$1"
echo "$MSG" >& 2
EOF
test "$status" != 0
'
+test_expect_success 'rm removes subdirectories recursively' '
+ mkdir -p dir/subdir/subsubdir &&
+ echo content >dir/subdir/subsubdir/file &&
+ git add dir/subdir/subsubdir/file &&
+ git rm -f dir/subdir/subsubdir/file &&
+ ! test -d dir
+'
+
test_done
test ! -s output.out
'
+test_expect_success 'pop -q --index works and is quiet' '
+ echo foo > file &&
+ git add file &&
+ git stash save --quiet &&
+ git stash pop -q --index > output.out 2>&1 &&
+ test foo = "$(git show :file)" &&
+ test ! -s output.out
+'
+
test_expect_success 'drop -q is quiet' '
git stash &&
git stash drop -q > output.out 2>&1 &&
. ./test-lib.sh
test_expect_success 'setup' '
+ echo "1 " >a &&
+ git add . &&
+ git commit -m zeroth &&
echo 1 >a &&
git add . &&
git commit -m first &&
git commit -a -m second
'
+test_expect_success 'git diff --quiet -w HEAD^^ HEAD^' '
+ git diff --quiet -w HEAD^^ HEAD^
+'
+
+test_expect_success 'git diff --quiet HEAD^^ HEAD^' '
+ test_must_fail git diff --quiet HEAD^^ HEAD^
+'
+
+test_expect_success 'git diff --quiet -w HEAD^ HEAD' '
+ test_must_fail git diff --quiet -w HEAD^ HEAD
+'
+
test_expect_success 'git diff-tree HEAD^ HEAD' '
git diff-tree --exit-code HEAD^ HEAD
test $? = 1
commit1=$(echo modify | git commit-tree $tree1 -p $commit0) &&
git update-ref refs/heads/master $commit0 &&
git update-ref refs/heads/tofail $commit1 &&
- git clone ./. victim &&
- GIT_DIR=victim/.git git config receive.denyCurrentBranch warn &&
- GIT_DIR=victim/.git git update-ref refs/heads/tofail $commit1 &&
+ git clone --bare ./. victim.git &&
+ GIT_DIR=victim.git git update-ref refs/heads/tofail $commit1 &&
git update-ref refs/heads/master $commit1 &&
git update-ref refs/heads/tofail $commit0
'
-cat >victim/.git/hooks/pre-receive <<'EOF'
+cat >victim.git/hooks/pre-receive <<'EOF'
#!/bin/sh
printf %s "$@" >>$GIT_DIR/pre-receive.args
cat - >$GIT_DIR/pre-receive.stdin
echo STDOUT pre-receive
echo STDERR pre-receive >&2
EOF
-chmod u+x victim/.git/hooks/pre-receive
+chmod u+x victim.git/hooks/pre-receive
-cat >victim/.git/hooks/update <<'EOF'
+cat >victim.git/hooks/update <<'EOF'
#!/bin/sh
echo "$@" >>$GIT_DIR/update.args
read x; printf %s "$x" >$GIT_DIR/update.stdin
echo STDERR update $1 >&2
test "$1" = refs/heads/master || exit
EOF
-chmod u+x victim/.git/hooks/update
+chmod u+x victim.git/hooks/update
-cat >victim/.git/hooks/post-receive <<'EOF'
+cat >victim.git/hooks/post-receive <<'EOF'
#!/bin/sh
printf %s "$@" >>$GIT_DIR/post-receive.args
cat - >$GIT_DIR/post-receive.stdin
echo STDOUT post-receive
echo STDERR post-receive >&2
EOF
-chmod u+x victim/.git/hooks/post-receive
+chmod u+x victim.git/hooks/post-receive
-cat >victim/.git/hooks/post-update <<'EOF'
+cat >victim.git/hooks/post-update <<'EOF'
#!/bin/sh
echo "$@" >>$GIT_DIR/post-update.args
read x; printf %s "$x" >$GIT_DIR/post-update.stdin
echo STDOUT post-update
echo STDERR post-update >&2
EOF
-chmod u+x victim/.git/hooks/post-update
+chmod u+x victim.git/hooks/post-update
test_expect_success push '
- test_must_fail git send-pack --force ./victim/.git \
+ test_must_fail git send-pack --force ./victim.git \
master tofail >send.out 2>send.err
'
test_expect_success 'updated as expected' '
- test $(GIT_DIR=victim/.git git rev-parse master) = $commit1 &&
- test $(GIT_DIR=victim/.git git rev-parse tofail) = $commit1
+ test $(GIT_DIR=victim.git git rev-parse master) = $commit1 &&
+ test $(GIT_DIR=victim.git git rev-parse tofail) = $commit1
'
test_expect_success 'hooks ran' '
- test -f victim/.git/pre-receive.args &&
- test -f victim/.git/pre-receive.stdin &&
- test -f victim/.git/update.args &&
- test -f victim/.git/update.stdin &&
- test -f victim/.git/post-receive.args &&
- test -f victim/.git/post-receive.stdin &&
- test -f victim/.git/post-update.args &&
- test -f victim/.git/post-update.stdin
+ test -f victim.git/pre-receive.args &&
+ test -f victim.git/pre-receive.stdin &&
+ test -f victim.git/update.args &&
+ test -f victim.git/update.stdin &&
+ test -f victim.git/post-receive.args &&
+ test -f victim.git/post-receive.stdin &&
+ test -f victim.git/post-update.args &&
+ test -f victim.git/post-update.stdin
'
test_expect_success 'pre-receive hook input' '
(echo $commit0 $commit1 refs/heads/master;
echo $commit1 $commit0 refs/heads/tofail
- ) | test_cmp - victim/.git/pre-receive.stdin
+ ) | test_cmp - victim.git/pre-receive.stdin
'
test_expect_success 'update hook arguments' '
(echo refs/heads/master $commit0 $commit1;
echo refs/heads/tofail $commit1 $commit0
- ) | test_cmp - victim/.git/update.args
+ ) | test_cmp - victim.git/update.args
'
test_expect_success 'post-receive hook input' '
echo $commit0 $commit1 refs/heads/master |
- test_cmp - victim/.git/post-receive.stdin
+ test_cmp - victim.git/post-receive.stdin
'
test_expect_success 'post-update hook arguments' '
echo refs/heads/master |
- test_cmp - victim/.git/post-update.args
+ test_cmp - victim.git/post-update.args
'
test_expect_success 'all hook stdin is /dev/null' '
- ! test -s victim/.git/update.stdin &&
- ! test -s victim/.git/post-update.stdin
+ ! test -s victim.git/update.stdin &&
+ ! test -s victim.git/post-update.stdin
'
test_expect_success 'all *-receive hook args are empty' '
- ! test -s victim/.git/pre-receive.args &&
- ! test -s victim/.git/post-receive.args
+ ! test -s victim.git/pre-receive.args &&
+ ! test -s victim.git/post-receive.args
'
test_expect_success 'send-pack produced no output' '
'
cat <<EOF >expect
-STDOUT pre-receive
-STDERR pre-receive
-STDOUT update refs/heads/master
-STDERR update refs/heads/master
-STDOUT update refs/heads/tofail
-STDERR update refs/heads/tofail
-STDOUT post-receive
-STDERR post-receive
-STDOUT post-update
-STDERR post-update
+remote: STDOUT pre-receive
+remote: STDERR pre-receive
+remote: STDOUT update refs/heads/master
+remote: STDERR update refs/heads/master
+remote: STDOUT update refs/heads/tofail
+remote: STDERR update refs/heads/tofail
+remote: error: hook declined to update refs/heads/tofail
+remote: STDOUT post-receive
+remote: STDERR post-receive
+remote: STDOUT post-update
+remote: STDERR post-update
EOF
test_expect_success 'send-pack stderr contains hook messages' '
- grep ^STD send.err >actual &&
- test_cmp - actual <expect
+ grep ^remote: send.err | sed "s/ *\$//" >actual &&
+ test_cmp expect actual
'
test_done
+: included from 6002 and others
+
[ -d .git/refs/tags ] || mkdir -p .git/refs/tags
:> sed.script
test "$para3" = "$PARA_HASH3"
'
+test_expect_success 'erroring out when using bad path parameters' '
+ test_must_fail git bisect start $PARA_HASH7 $HASH1 -- foobar 2> error.txt &&
+ grep "bad path parameters" error.txt
+'
+
#
#
test_done
test_cmp expected actual
'
+test_expect_success 'setup double-dash tests' '
+cat >double-dash <<EOF &&
+--
+->
+other
+EOF
+git add double-dash
+'
+
+cat >expected <<EOF
+double-dash:->
+EOF
+test_expect_success 'grep -- pattern' '
+ git grep -- "->" >actual &&
+ test_cmp expected actual
+'
+test_expect_success 'grep -- pattern -- pathspec' '
+ git grep -- "->" -- double-dash >actual &&
+ test_cmp expected actual
+'
+test_expect_success 'grep -e pattern -- path' '
+ git grep -e "->" -- double-dash >actual &&
+ test_cmp expected actual
+'
+
+cat >expected <<EOF
+double-dash:--
+EOF
+test_expect_success 'grep -e -- -- path' '
+ git grep -e -- -- double-dash >actual &&
+ test_cmp expected actual
+'
+
test_done
# ----------------------------------------------------------------------
# gitweb config and repo config
-cat >>gitweb_config.perl <<EOF
-
-\$feature{'blame'}{'override'} = 1;
-\$feature{'snapshot'}{'override'} = 1;
-\$feature{'avatar'}{'override'} = 1;
+cat >>gitweb_config.perl <<\EOF
+
+# turn on override for each overridable feature
+foreach my $key (keys %feature) {
+ if ($feature{$key}{'sub'}) {
+ $feature{$key}{'override'} = 1;
+ }
+}
EOF
+test_expect_success \
+ 'config override: projects list (implicit)' \
+ 'gitweb_run'
+test_debug 'cat gitweb.log'
+
test_expect_success \
'config override: tree view, features not overridden in repo config' \
'gitweb_run "p=.git;a=tree"'
/*
* This program can either change modification time of the given
* file(s) or just print it. The program does not change atime nor
- * ctime (their values are explicitely preserved).
+ * ctime (their values are explicitly preserved).
*
* The mtime can be changed to an absolute value:
*
} else if (!strcmp(capname, "connect")) {
data->connect = 1;
} else if (mandatory) {
- die("Unknown madatory capability %s. This remote "
+ die("Unknown mandatory capability %s. This remote "
"helper probably needs newer version of Git.\n",
capname);
}
if (!remote)
die("No remote provided to transport_get()");
+ ret->got_remote_refs = 0;
ret->remote = remote;
helper = remote->foreign_vcs;
const struct ref *transport_get_remote_refs(struct transport *transport)
{
- if (!transport->remote_refs)
+ if (!transport->got_remote_refs) {
transport->remote_refs = transport->get_refs_list(transport, 0);
+ transport->got_remote_refs = 1;
+ }
return transport->remote_refs;
}
void *data;
const struct ref *remote_refs;
+ /**
+ * Indicates whether we already called get_refs_list(); set by
+ * transport.c::transport_get_remote_refs().
+ */
+ unsigned got_remote_refs : 1;
+
/**
* Returns 0 if successful, positive if the option is not
* recognized or is inapplicable, and negative if the option
if (name[0] == '\0') {
hashcpy(sha1, root);
+ free(tree);
return 0;
}
fprintf(pack_pipe, "-%s\n", sha1_to_hex(commit->object.sha1));
}
-static int do_rev_list(int fd, void *create_full_pack)
+static int do_rev_list(int in, int out, void *create_full_pack)
{
int i;
struct rev_info revs;
- pack_pipe = xfdopen(fd, "w");
+ pack_pipe = xfdopen(out, "w");
init_revisions(&revs, NULL);
revs.tag_objects = 1;
revs.tree_objects = 1;
int arg = 0;
if (shallow_nr) {
+ memset(&rev_list, 0, sizeof(rev_list));
rev_list.proc = do_rev_list;
- rev_list.data = 0;
+ rev_list.out = -1;
if (start_async(&rev_list))
die("git upload-pack: unable to fork git-rev-list");
argv[arg++] = "pack-objects";
return 1;
}
-static inline void strbuf_write(struct strbuf *sb, const char *buf, int len)
+static void strbuf_addchars(struct strbuf *sb, int c, size_t n)
{
- if (sb)
- strbuf_insert(sb, sb->len, buf, len);
- else
- fwrite(buf, len, 1, stdout);
-}
-
-static void print_spaces(struct strbuf *buf, int count)
-{
- static const char s[] = " ";
- while (count >= sizeof(s)) {
- strbuf_write(buf, s, sizeof(s) - 1);
- count -= sizeof(s) - 1;
- }
- strbuf_write(buf, s, count);
+ strbuf_grow(sb, n);
+ memset(sb->buf + sb->len, c, n);
+ strbuf_setlen(sb, sb->len + n);
}
static void strbuf_add_indented_text(struct strbuf *buf, const char *text,
const char *eol = strchrnul(text, '\n');
if (*eol == '\n')
eol++;
- print_spaces(buf, indent);
- strbuf_write(buf, text, eol - text);
+ strbuf_addchars(buf, ' ', indent);
+ strbuf_add(buf, text, eol - text);
text = eol;
indent = indent2;
}
* consumed (and no extra indent is necessary for the first line).
*/
int strbuf_add_wrapped_text(struct strbuf *buf,
- const char *text, int indent, int indent2, int width)
+ const char *text, int indent1, int indent2, int width)
{
- int w = indent, assume_utf8 = is_utf8(text);
- const char *bol = text, *space = NULL;
+ int indent, w, assume_utf8 = 1;
+ const char *bol, *space, *start = text;
+ size_t orig_len = buf->len;
if (width <= 0) {
- strbuf_add_indented_text(buf, text, indent, indent2);
+ strbuf_add_indented_text(buf, text, indent1, indent2);
return 1;
}
+retry:
+ bol = text;
+ w = indent = indent1;
+ space = NULL;
if (indent < 0) {
w = -indent;
space = text;
if (space)
start = space;
else
- print_spaces(buf, indent);
- strbuf_write(buf, start, text - start);
+ strbuf_addchars(buf, ' ', indent);
+ strbuf_add(buf, start, text - start);
if (!c)
return w;
space = text;
else if (c == '\n') {
space++;
if (*space == '\n') {
- strbuf_write(buf, "\n", 1);
+ strbuf_addch(buf, '\n');
goto new_line;
}
else if (!isalnum(*space))
goto new_line;
else
- strbuf_write(buf, " ", 1);
+ strbuf_addch(buf, ' ');
}
w++;
text++;
}
else {
new_line:
- strbuf_write(buf, "\n", 1);
+ strbuf_addch(buf, '\n');
text = bol = space + isspace(*space);
space = NULL;
w = indent = indent2;
}
continue;
}
- if (assume_utf8)
+ if (assume_utf8) {
w += utf8_width(&text, NULL);
- else {
+ if (!text) {
+ assume_utf8 = 0;
+ text = start;
+ strbuf_setlen(buf, orig_len);
+ goto retry;
+ }
+ } else {
w++;
text++;
}
}
}
-int print_wrapped_text(const char *text, int indent, int indent2, int width)
-{
- return strbuf_add_wrapped_text(NULL, text, indent, indent2, width);
-}
-
int is_encoding_utf8(const char *name)
{
if (!name)
int is_utf8(const char *text);
int is_encoding_utf8(const char *name);
-int print_wrapped_text(const char *text, int indent, int indent2, int len);
int strbuf_add_wrapped_text(struct strbuf *buf,
const char *text, int indent, int indent2, int width);
projects / thirdparty / git.git / commitdiff
