pinctrl: spacemit: remove extra line in debug output

The debug output for spacemit_pinconf_dbg_show() prints an extra newline
at the end. This is redundant as pinconf_pins_show() in pinconf.c already
adds a newline in its for loop.

Remove the newline to avoid the extra line in the output.

Example current output:
$ cat /sys/kernel/debug/pinctrl/d401e000.pinctrl/pinconf-pins
Pin config settings per pin
Format: pin (name): configs
pin 0 (GPIO_00): , bias pull disabled, io type (Fixed/1V8), drive strength (32 mA), register (0x1041)

pin 1 (GPIO_01): slew rate (0x0), bias pull disabled, io type (Fixed/1V8), drive strength (32 mA), register (0x1041)

pin 2 (GPIO_02): slew rate (0x0), bias pull disabled, io type (Fixed/1V8), drive strength (32 mA), register (0x1041)

...

Signed-off-by: Hendrik Hamerlinck <hendrik.hamerlinck@hammernet.be>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/20250805150701.129113-1-hendrik.hamerlinck@hammernet.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/pinctrl/spacemit/pinctrl-k1.c b/drivers/pinctrl/spacemit/pinctrl-k1.c
index 9996b1c4a07e72f2a3832b759feddcd4e07f2159..fb361f2acb54fba283e4872dcfd3b98d521a15a0 100644 (file)
--- a/drivers/pinctrl/spacemit/pinctrl-k1.c
+++ b/drivers/pinctrl/spacemit/pinctrl-k1.c
@@ -707,7 +707,7 @@ static void spacemit_pinconf_dbg_show(struct pinctrl_dev *pctldev,
                           spacemit_get_drive_strength_mA(IO_TYPE_1V8, tmp),
                           spacemit_get_drive_strength_mA(IO_TYPE_3V3, tmp));
 
-       seq_printf(seq, ", register (0x%04x)\n", value);
+       seq_printf(seq, ", register (0x%04x)", value);
 }
 
 static const struct pinconf_ops spacemit_pinconf_ops = {