zynqmp-a2197-revA.dtb \
zynqmp-dlc21-revA.dtb \
zynqmp-e-a2197-00-revA.dtb \
+ zynqmp-e-a2197-00-revB.dtb \
zynqmp-g-a2197-00-revA.dtb \
zynqmp-m-a2197-01-revA.dtb \
zynqmp-m-a2197-02-revA.dtb \
zynqmp-m-a2197-03-revA.dtb \
zynqmp-p-a2197-00-revA.dtb \
+ zynqmp-p-a2197-00-revA-x-prc-01-revA.dtbo \
+ zynqmp-p-a2197-00-revA-x-prc-02-revA.dtbo \
+ zynqmp-p-a2197-00-revA-x-prc-03-revA.dtbo \
+ zynqmp-p-a2197-00-revA-x-prc-04-revA.dtbo \
+ zynqmp-p-a2197-00-revA-x-prc-05-revA.dtbo \
zynqmp-mini.dtb \
zynqmp-mini-emmc0.dtb \
zynqmp-mini-emmc1.dtb \
zynqmp-mini-nand.dtb \
zynqmp-mini-qspi.dtb \
+ zynqmp-sc-revB.dtb \
+ zynqmp-sc-revC.dtb \
+ zynqmp-sc-vek280-revA.dtbo \
+ zynqmp-sc-vek280-revB.dtbo \
+ zynqmp-sc-vhk158-revA.dtbo \
+ zynqmp-sc-vpk120-revB.dtbo \
+ zynqmp-sc-vpk180-revA.dtbo \
+ zynqmp-sc-vpk180-revB.dtbo \
+ zynqmp-sc-vn-p-b2197-00-revA.dtbo \
zynqmp-sm-k24-revA.dtb \
zynqmp-smk-k24-revA.dtb \
zynqmp-sm-k26-revA.dtb \
zynqmp-smk-k26-revA.dtb \
+ zynqmp-sck-kd-g-revA.dtbo \
zynqmp-sck-kr-g-revA.dtbo \
zynqmp-sck-kr-g-revB.dtbo \
zynqmp-sck-kv-g-revA.dtbo \
zynqmp-sck-kv-g-revB.dtbo \
zynqmp-topic-miamimp-xilinx-xdp-v1r1.dtb \
+ zynqmp-vpk120-revA.dtb \
+ zynqmp-vp-x-a2785-00-revA.dtb \
zynqmp-zcu100-revC.dtb \
zynqmp-zcu102-revA.dtb \
zynqmp-zcu102-revB.dtb \
zynqmp-zcu1285-revA.dtb \
zynqmp-zcu208-revA.dtb \
zynqmp-zcu216-revA.dtb \
+ zynqmp-zcu670-revA.dtb \
+ zynqmp-zcu670-revB.dtb \
zynqmp-zc1232-revA.dtb \
zynqmp-zc1254-revA.dtb \
zynqmp-zc1751-xm015-dc1.dtb \
/*
* dts file for Avnet Ultra96 rev1
*
- * (C) Copyright 2018 - 2020, Xilinx, Inc.
+ * (C) Copyright 2018, Xilinx, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
&nfc0 {
status = "okay";
+ nand@0 {
+ reg = <0>;
+ };
};
&smcc {
*
* (C) Copyright 2018-2019, Xilinx, Inc.
*
- * Siva Durga Prasad <siva.durga.prasad.paladugu@amd.com>>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
* Michal Simek <michal.simek@amd.com>
*/
*
* (C) Copyright 2018-2019, Xilinx, Inc.
*
- * Siva Durga Prasad <siva.durga.prasad.paladugu@amd.com>>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
* Michal Simek <michal.simek@amd.com>
*/
*
* (C) Copyright 2018-2019, Xilinx, Inc.
*
- * Siva Durga Prasad <siva.durga.prasad.paladugu@amd.com>>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
* Michal Simek <michal.simek@amd.com>
*/
*
* (C) Copyright 2018-2019, Xilinx, Inc.
*
- * Siva Durga Prasad <siva.durga.prasad.paladugu@amd.com>>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
* Michal Simek <michal.simek@amd.com>
*/
*
* (C) Copyright 2019, Xilinx, Inc.
*
- * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
*/
/dts-v1/;
&qspi {
status = "okay";
- is-dual = <0>;
num-cs = <1>;
flash@0 { /* 16 MB */
compatible = "n25q128a11", "jedec,spi-nor";
&qspi {
bootph-all;
status = "okay";
- is-dual = <0>;
num-cs = <1>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
&qspi {
status = "okay";
- is-dual = <0>;
num-cs = <1>;
flash@0 {
compatible = "micron,m25p128";
&qspi {
bootph-all;
status = "okay";
- is-dual = <0>;
num-cs = <1>;
flash@0 {
compatible = "st,m25p80", "n25q256a", "jedec,spi-nor";
};
&qspi {
- is-dual = <1>;
};
};
&qspi {
- is-dual = <1>;
};
&nfc0 {
status = "okay";
+ nand@0 {
+ reg = <0>;
+ };
};
&smcc {
/*
* Clock specification for Xilinx ZynqMP
*
- * (C) Copyright 2017 - 2021, Xilinx, Inc.
+ * (C) Copyright 2017 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
clocks = <&zynqmp_clk PL0_REF>;
};
- fclk1: fclk1 {
- status = "okay";
- compatible = "xlnx,fclk";
- clocks = <&zynqmp_clk PL1_REF>;
- };
-
- fclk2: fclk2 {
- status = "okay";
- compatible = "xlnx,fclk";
- clocks = <&zynqmp_clk PL2_REF>;
- };
-
- fclk3: fclk3 {
- status = "okay";
- compatible = "xlnx,fclk";
- clocks = <&zynqmp_clk PL3_REF>;
- };
-
pss_ref_clk: pss_ref_clk {
bootph-all;
compatible = "fixed-clock";
&uart0 {
clocks = <&zynqmp_clk UART0_REF>, <&zynqmp_clk LPD_LSBUS>;
+ assigned-clocks = <&zynqmp_clk UART0_REF>;
};
&uart1 {
clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>;
+ assigned-clocks = <&zynqmp_clk UART1_REF>;
};
&usb0 {
phy-handle = <&phy0>;
phy-mode = "sgmii"; /* DTG generates this properly 1512 */
is-internal-pcspma;
- /* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */
- phy0: ethernet-phy@0 {
- reg = <0>;
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx Versal a2197 RevB System Controller
+ *
+ * (C) Copyright 2019 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-e-a2197-00-revA.dts"
+
+/ {
+ model = "Versal System Controller on a2197 Eval board RevB"; /* VCK190/VMK180 */
+ compatible = "xlnx,zynqmp-e-a2197-00-revB", "xlnx,zynqmp-a2197-revB",
+ "xlnx,zynqmp-a2197", "xlnx,zynqmp";
+
+ /delete-node/ ina226-vcco-500;
+ /delete-node/ ina226-vcco-501;
+ /delete-node/ ina226-vcco-502;
+};
+
+&i2c0 {
+ i2c-mux@74 { /* u33 */
+ i2c@2 { /* PCIE_CLK */
+ /delete-node/ clock-generator@6c;
+ };
+ i2c@3 { /* PMBUS2_INA226 */
+ /delete-node/ ina226@42;
+ /delete-node/ ina226@43;
+ /delete-node/ ina226@44;
+ };
+ };
+};
phy-handle = <&phy0>;
phy-mode = "sgmii";
is-internal-pcspma;
- phy0: ethernet-phy@0 { /* marwell m88e1512 */
- reg = <0>;
- reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 { /* marwell m88e1512 */
+ reg = <0>;
+ reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
/* xlnx,phy-type = <PHY_TYPE_SGMII>; */
+ };
};
};
&qspi {
status = "okay";
- is-dual = <1>;
flash@0 {
compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
#address-cells = <1>;
status = "okay";
phy-handle = <&phy0>;
phy-mode = "sgmii"; /* DTG generates this properly 1512 */
- phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>;
- phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */
- reg = <0>;
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>;
+ phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */
+ reg = <0>;
/* xlnx,phy-type = <PHY_TYPE_SGMII>; */
+ };
};
};
#gpio-cells = <2>;
gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
"", "", "", "";
- gtr_sel0 {
+ gtr-sel0 {
gpio-hog;
gpios = <0 0>;
input; /* FIXME add meaning */
line-name = "sw4_1";
};
- gtr_sel1 {
+ gtr-sel1 {
gpio-hog;
gpios = <1 0>;
input; /* FIXME add meaning */
line-name = "sw4_2";
};
- gtr_sel2 {
+ gtr-sel2 {
gpio-hog;
gpios = <2 0>;
input; /* FIXME add meaning */
line-name = "sw4_3";
};
- gtr_sel3 {
+ gtr-sel3 {
gpio-hog;
gpios = <3 0>;
input; /* FIXME add meaning */
&qspi {
status = "okay";
- is-dual = <1>;
flash@0 {
compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
#address-cells = <1>;
status = "okay";
phy-handle = <&phy0>;
phy-mode = "sgmii";
- phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>;
- phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */
- reg = <0>;
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>;
+ phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */
+ reg = <0>;
+ };
};
};
#gpio-cells = <2>;
gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
"", "", "", "";
- gtr_sel0 {
+ gtr-sel0 {
gpio-hog;
gpios = <0 0>;
input; /* FIXME add meaning */
line-name = "sw4_1";
};
- gtr_sel1 {
+ gtr-sel1 {
gpio-hog;
gpios = <1 0>;
input; /* FIXME add meaning */
line-name = "sw4_2";
};
- gtr_sel2 {
+ gtr-sel2 {
gpio-hog;
gpios = <2 0>;
input; /* FIXME add meaning */
line-name = "sw4_3";
};
- gtr_sel3 {
+ gtr-sel3 {
gpio-hog;
gpios = <3 0>;
input; /* FIXME add meaning */
&qspi {
status = "okay";
- is-dual = <1>;
flash@0 {
compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
#address-cells = <1>;
status = "okay";
phy-handle = <&phy0>;
phy-mode = "sgmii";
- phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>;
- phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */
- reg = <0>;
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>;
+ phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */
+ reg = <0>;
+ };
};
};
#gpio-cells = <2>;
gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
"", "", "", "";
- gtr_sel0 {
+ gtr-sel0 {
gpio-hog;
gpios = <0 0>;
input; /* FIXME add meaning */
line-name = "sw4_1";
};
- gtr_sel1 {
+ gtr-sel1 {
gpio-hog;
gpios = <1 0>;
input; /* FIXME add meaning */
line-name = "sw4_2";
};
- gtr_sel2 {
+ gtr-sel2 {
gpio-hog;
gpios = <2 0>;
input; /* FIXME add meaning */
line-name = "sw4_3";
};
- gtr_sel3 {
+ gtr-sel3 {
gpio-hog;
gpios = <3 0>;
input; /* FIXME add meaning */
*
* (C) Copyright 2018, Xilinx, Inc.
*
- * Siva Durga Prasad <siva.durga.prasad.paladugu@amd.com>>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
*/
/dts-v1/;
*
* (C) Copyright 2018, Xilinx, Inc.
*
- * Siva Durga Prasad <siva.durga.prasad.paladugu@amd.com>>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
*/
/dts-v1/;
*
* (C) Copyright 2018, Xilinx, Inc.
*
- * Siva Durga Prasad <siva.durga.prasad.paladugu@amd.com>>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
* Michal Simek <michal.simek@amd.com>
*/
*
* (C) Copyright 2015 - 2020, Xilinx, Inc.
*
- * Siva Durga Prasad <siva.durga.prasad.paladugu@amd.com>>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
* Michal Simek <michal.simek@amd.com>
*/
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP System Controller X-PRC-01 revA (SE1)
+ *
+ * (C) Copyright 2019 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/{
+ compatible = "xlnx,zynqmp-x-prc-01-revA", "xlnx,zynqmp-x-prc-01";
+
+ fragment@0 {
+ target = <&dc_i2c>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ x_prc_eeprom: eeprom@52 { /* u120 */
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+
+ x_prc_tca9534: gpio@22 { /* u121 tca9534 */
+ compatible = "nxp,pca9534";
+ reg = <0x22>;
+ gpio-controller; /* IRQ not connected */
+ #gpio-cells = <2>;
+ gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
+ "", "", "", "";
+ gtr-sel0 {
+ gpio-hog;
+ gpios = <0 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_1";
+ };
+ gtr-sel1 {
+ gpio-hog;
+ gpios = <1 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_2";
+ };
+ gtr-sel2 {
+ gpio-hog;
+ gpios = <2 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_3";
+ };
+ gtr-sel3 {
+ gpio-hog;
+ gpios = <3 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_4";
+ };
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&i2c1>; /* Must be enabled via J242 */
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom_versal: eeprom@51 { /* u116 */
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP System Controller X-PRC-02 revA (SE2)
+ *
+ * (C) Copyright 2019 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/{
+ compatible = "xlnx,zynqmp-x-prc-02-revA", "xlnx,zynqmp-x-prc-02";
+
+ fragment@0 {
+ target = <&dc_i2c>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ x_prc_eeprom: eeprom@52 { /* u16 */
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+
+ x_prc_tca9534: gpio@22 { /* u17 tca9534 */
+ compatible = "nxp,pca9534";
+ reg = <0x22>;
+ gpio-controller; /* IRQ not connected */
+ #gpio-cells = <2>;
+ gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
+ "", "", "", "";
+ gtr-sel0 {
+ gpio-hog;
+ gpios = <0 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_1";
+ };
+ gtr-sel1 {
+ gpio-hog;
+ gpios = <1 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_2";
+ };
+ gtr-sel2 {
+ gpio-hog;
+ gpios = <2 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_3";
+ };
+ gtr-sel3 {
+ gpio-hog;
+ gpios = <3 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_4";
+ };
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&i2c1>; /* Must be enabled via J242 */
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom_versal: eeprom@51 { /* u12 */
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP System Controller X-PRC-03 revA (SE3)
+ *
+ * (C) Copyright 2019 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/{
+ compatible = "xlnx,zynqmp-x-prc-03-revA", "xlnx,zynqmp-x-prc-03";
+
+ fragment@0 {
+ target = <&dc_i2c>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ x_prc_eeprom: eeprom@52 { /* u1 */
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+
+ x_prc_tca9534: gpio@22 { /* u3 tca9534 */
+ compatible = "nxp,pca9534";
+ reg = <0x22>;
+ gpio-controller; /* IRQ not connected */
+ #gpio-cells = <2>;
+ gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
+ "", "", "", "";
+ gtr-sel0 {
+ gpio-hog;
+ gpios = <0 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_1";
+ };
+ gtr-sel1 {
+ gpio-hog;
+ gpios = <1 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_2";
+ };
+ gtr-sel2 {
+ gpio-hog;
+ gpios = <2 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_3";
+ };
+ gtr-sel3 {
+ gpio-hog;
+ gpios = <3 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_4";
+ };
+ };
+ x_prc_si5338: clock-generator@70 { /* U9 */
+ compatible = "silabs,si5338";
+ reg = <0x70>; /* FIXME */
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&i2c1>; /* Must be enabled via J90/J91 */
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom_versal: eeprom@51 { /* u2 */
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP System Controller X-PRC-04 revA (SE4)
+ *
+ * (C) Copyright 2019 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/{
+ compatible = "xlnx,zynqmp-x-prc-04-revA", "xlnx,zynqmp-x-prc-04";
+
+ fragment@0 {
+ target = <&dc_i2c>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ x_prc_eeprom: eeprom@52 { /* u120 */
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+
+ x_prc_tca9534: gpio@22 { /* u121 tca9534 */
+ compatible = "nxp,pca9534";
+ reg = <0x22>;
+ gpio-controller; /* IRQ not connected */
+ #gpio-cells = <2>;
+ gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
+ "", "", "", "";
+ gtr-sel0 {
+ gpio-hog;
+ gpios = <0 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_1";
+ };
+ gtr-sel1 {
+ gpio-hog;
+ gpios = <1 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_2";
+ };
+ gtr-sel2 {
+ gpio-hog;
+ gpios = <2 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_3";
+ };
+ gtr-sel3 {
+ gpio-hog;
+ gpios = <3 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_4";
+ };
+ };
+
+ si570_gem_tsu: clock-generator@5d { /* u164 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <300000000>; /* FIXME */
+ clock-frequency = <300000000>;
+ clock-output-names = "si570_gem_tsu_clk";
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&i2c1>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom_versal: eeprom@51 { /* u153 */
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP System Controller X-PRC-05 revA (SE5)
+ *
+ * (C) Copyright 2019 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/{
+ compatible = "xlnx,zynqmp-x-prc-05-revA", "xlnx,zynqmp-x-prc-05";
+
+ fragment@0 {
+ target = <&dc_i2c>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ x_prc_eeprom: eeprom@52 { /* u120 */
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+
+ x_prc_tca9534: gpio@22 { /* u121 tca9534 */
+ compatible = "nxp,pca9534";
+ reg = <0x22>;
+ gpio-controller; /* IRQ not connected */
+ #gpio-cells = <2>;
+ gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
+ "", "", "", "";
+ gtr-sel0 {
+ gpio-hog;
+ gpios = <0 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_1";
+ };
+ gtr-sel1 {
+ gpio-hog;
+ gpios = <1 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_2";
+ };
+ gtr-sel2 {
+ gpio-hog;
+ gpios = <2 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_3";
+ };
+ gtr-sel3 {
+ gpio-hog;
+ gpios = <3 0>;
+ input; /* FIXME add meaning */
+ line-name = "sw4_4";
+ };
+ };
+
+ si570_gem_tsu: clock-generator@5d { /* u164 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <300000000>; /* FIXME */
+ clock-frequency = <300000000>;
+ clock-output-names = "si570_gem_tsu_clk";
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&i2c1>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom_versal: eeprom@51 { /* u153 */
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ };
+ };
+ };
+};
phy-handle = <&phy0>;
phy-mode = "sgmii"; /* DTG generates this properly 1512 */
is-internal-pcspma;
- /* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */
- phy0: ethernet-phy@0 {
- reg = <0>;
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
};
#gpio-cells = <2>;
gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
"", "", "", "";
- gtr_sel0 {
+ gtr-sel0 {
gpio-hog;
gpios = <0 0>;
input; /* FIXME add meaning */
line-name = "sw4_1";
};
- gtr_sel1 {
+ gtr-sel1 {
gpio-hog;
gpios = <1 0>;
input; /* FIXME add meaning */
line-name = "sw4_2";
};
- gtr_sel2 {
+ gtr-sel2 {
gpio-hog;
gpios = <2 0>;
input; /* FIXME add meaning */
line-name = "sw4_3";
};
- gtr_sel3 {
+ gtr-sel3 {
gpio-hog;
gpios = <3 0>;
input; /* FIXME add meaning */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP Generic System Controller
+ *
+ * (C) Copyright 2021 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ model = "ZynqMP Generic System Controller";
+ compatible = "xlnx,zynqmp-sc-revB", "xlnx,zynqmp-sc", "xlnx,zynqmp";
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
+ nvmem0 = &eeprom;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &dcc;
+ spi0 = &qspi;
+ spi1 = &spi0;
+ spi2 = &spi1;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial1:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ fwuen {
+ label = "sw16";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_MISC>;
+ wakeup-source;
+ autorepeat;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ ds40-led {
+ label = "heartbeat";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ ds44-led {
+ label = "status";
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ si5332_2: si5332_2 { /* u42 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+
+ pwm-fan {
+ compatible = "pwm-fan";
+ status = "okay";
+ pwms = <&ttc0 2 40000 1>;
+ };
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */
+ "QSPI_CS_B", "", "LED1", "LED2", "", /* 5 - 9 */
+ "", "ZU4_TRIGGER", "FWUEN", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
+ "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
+ "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "I2C1_SCL", /* 20 - 24 */
+ "I2C1_SDA", "UART0_RXD", "UART0_TXD", "", "", /* 25 - 29 */
+ "", "", "", "", "I2C0_SCL", /* 30 - 34 */
+ "I2C0_SDA", "UART1_TXD", "UART1_RXD", "GEM_TX_CLK", "GEM_TX_D0", /* 35 - 39 */
+ "GEM_TX_D1", "GEM_TX_D2", "GEM_TX_D3", "GEM_TX_CTL", "GEM_RX_CLK", /* 40 - 44 */
+ "GEM_RX_D0", "GEM_RX_D1", "GEM_RX_D2", "GEM_RX_D3", "GEM_RX_CTL", /* 45 - 49 */
+ "GEM_MDC", "GEM_MDIO", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */
+ "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */
+ "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "", /* 60 - 64 */
+ "", "", "", "", "", /* 65 - 69 */
+ "", "", "", "", "", /* 70 - 74 */
+ "", "", "ETH_RESET_B", /* 75 - 77, MIO end and EMIO start */
+ "", "", /* 78 - 79 */
+ "", "", "", "", "", /* 80 - 84 */
+ "", "", "", "", "", /* 85 -89 */
+ "", "", "", "", "", /* 90 - 94 */
+ "", "", "", "", "", /* 95 - 99 */
+ "", "", "", "", "", /* 100 - 104 */
+ "", "", "", "", "", /* 105 - 109 */
+ "", "", "", "", "", /* 110 - 114 */
+ "", "", "", "", "", /* 115 - 119 */
+ "", "", "", "", "", /* 120 - 124 */
+ "", "", "", "", "", /* 125 - 129 */
+ "", "", "", "", "", /* 130 - 134 */
+ "", "", "", "", "", /* 135 - 139 */
+ "", "", "", "", "", /* 140 - 144 */
+ "", "", "", "", "", /* 145 - 149 */
+ "", "", "", "", "", /* 150 - 154 */
+ "", "", "", "", "", /* 155 - 159 */
+ "", "", "", "", "", /* 160 - 164 */
+ "", "", "", "", "", /* 165 - 169 */
+ "", "", "", ""; /* 170 - 173 */
+};
+
+&gem1 { /* gem1 MIO38-49, MDIO MIO50/51 */
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem1_default>;
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@1 {
+ #phy-cells = <1>;
+ compatible = "ethernet-phy-id2000.a231";
+ reg = <1>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,dp83867-rxctrl-strap-quirk;
+ reset-gpios = <&gpio 77 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <100>;
+ reset-deassert-us = <280>;
+ };
+ };
+};
+
+&i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ scl-gpios = <&gpio 34 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 35 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c1 { /* i2c1 MIO 24-25 */
+ status = "okay";
+ bootph-all;
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ /* Use for storing information about SC board */
+ eeprom: eeprom@54 { /* u34 - m24128 16kB */
+ compatible = "st,24c128", "atmel,24c128";
+ reg = <0x54>; /* & 0x5c */
+ bootph-all;
+ };
+};
+
+/* USB 3.0 only */
+&psgtr {
+ status = "okay";
+ /* nc, nc, usb3 */
+ clocks = <&si5332_2>;
+ clock-names = "ref2";
+};
+
+&qspi { /* MIO 0-5 */
+ status = "okay";
+ /* QSPI should also have PINCTRL setup */
+ flash@0 {
+ compatible = "mt25qu512a", "m25p80", "jedec,spi-nor"; /* mt25qu512abb8e12 512Mib */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <40000000>; /* 40MHz */
+ partition@0 {
+ label = "Image Selector";
+ reg = <0x0 0x80000>; /* 512KB */
+ read-only;
+ lock;
+ };
+ partition@80000 {
+ label = "Image Selector Golden";
+ reg = <0x80000 0x80000>; /* 512KB */
+ read-only;
+ lock;
+ };
+ partition@100000 {
+ label = "Persistent Register";
+ reg = <0x100000 0x20000>; /* 128KB */
+ };
+ partition@120000 {
+ label = "Persistent Register Backup";
+ reg = <0x120000 0x20000>; /* 128KB */
+ };
+ partition@140000 {
+ label = "Open_1";
+ reg = <0x140000 0xC0000>; /* 768KB */
+ };
+ partition@200000 {
+ label = "Image A (FSBL, PMU, ATF, U-Boot)";
+ reg = <0x200000 0xD00000>; /* 13MB */
+ };
+ partition@f00000 {
+ label = "ImgSel Image A Catch";
+ reg = <0xF00000 0x80000>; /* 512KB */
+ read-only;
+ lock;
+ };
+ partition@f80000 {
+ label = "Image B (FSBL, PMU, ATF, U-Boot)";
+ reg = <0xF80000 0xD00000>; /* 13MB */
+ };
+ partition@1c80000 {
+ label = "ImgSel Image B Catch";
+ reg = <0x1C80000 0x80000>; /* 512KB */
+ read-only;
+ lock;
+ };
+ partition@1d00000 {
+ label = "Open_2";
+ reg = <0x1D00000 0x100000>; /* 1MB */
+ };
+ partition@1e00000 {
+ label = "Recovery Image";
+ reg = <0x1E00000 0x200000>; /* 2MB */
+ read-only;
+ lock;
+ };
+ partition@2000000 {
+ label = "Recovery Image Backup";
+ reg = <0x2000000 0x200000>; /* 2MB */
+ read-only;
+ lock;
+ };
+ partition@2200000 {
+ label = "U-Boot storage variables";
+ reg = <0x2200000 0x20000>; /* 128KB */
+ };
+ partition@2220000 {
+ label = "U-Boot storage variables backup";
+ reg = <0x2220000 0x20000>; /* 128KB */
+ };
+ partition@2240000 {
+ label = "SHA256";
+ reg = <0x2240000 0x40000>; /* 256B but 256KB sector */
+ read-only;
+ lock;
+ };
+ partition@2280000 {
+ label = "Secure OS Storage";
+ reg = <0x2280000 0x20000>; /* 128KB */
+ };
+ partition@22A0000 {
+ label = "User";
+ reg = <0x22A0000 0x1d60000>; /* 29.375 MB */
+ };
+ };
+};
+
+&sdhci0 { /* emmc MIO 13-23 - with some settings MTFC16GAPALBH 16GB */
+ status = "okay";
+ non-removable;
+ disable-wp;
+ bus-width = <8>;
+ xlnx,mio-bank = <0>;
+};
+
+&ttc0 {
+ status = "okay";
+ #pwm-cells = <3>;
+};
+
+&uart1 { /* uart0 MIO36-37 */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&pinctrl0 { /* required by spec */
+ status = "okay";
+
+ pinctrl_uart1_default: uart1-default {
+ conf {
+ groups = "uart1_9_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ drive-strength = <12>;
+ };
+
+ conf-rx {
+ pins = "MIO37";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO36";
+ bias-disable;
+ };
+
+ mux {
+ groups = "uart1_9_grp";
+ function = "uart1";
+ };
+ };
+
+ pinctrl_i2c0_default: i2c0-default {
+ mux {
+ groups = "i2c0_8_grp";
+ function = "i2c0";
+ };
+
+ conf {
+ groups = "i2c0_8_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c0_gpio: i2c0-gpio {
+ mux {
+ groups = "gpio0_34_grp", "gpio0_35_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_34_grp", "gpio0_35_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_default: i2c1-default {
+ conf {
+ groups = "i2c1_6_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux {
+ groups = "i2c1_6_grp";
+ function = "i2c1";
+ };
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ conf {
+ groups = "gpio0_24_grp", "gpio0_25_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux {
+ groups = "gpio0_24_grp", "gpio0_25_grp";
+ function = "gpio0";
+ };
+ };
+
+ pinctrl_gem1_default: gem1-default {
+ conf {
+ groups = "ethernet1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO44", "MIO46", "MIO48";
+ bias-high-impedance;
+ low-power-disable;
+ };
+
+ conf-bootstrap {
+ pins = "MIO45", "MIO47", "MIO49";
+ bias-disable;
+ low-power-disable;
+ };
+
+ conf-tx {
+ pins = "MIO38", "MIO39", "MIO40",
+ "MIO41", "MIO42", "MIO43";
+ bias-disable;
+ low-power-enable;
+ };
+
+ conf-mdio {
+ groups = "mdio1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ };
+
+ mux-mdio {
+ function = "mdio1";
+ groups = "mdio1_0_grp";
+ };
+
+ mux {
+ function = "ethernet1";
+ groups = "ethernet1_0_grp";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP Generic System Controller
+ *
+ * Copyright (C) 2021 - 2022, Xilinx, Inc.
+ * Copyright (C) 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-sc-revB.dts"
+
+/ {
+ model = "ZynqMP Generic System Controller";
+ compatible = "xlnx,zynqmp-sc-revC", "xlnx,zynqmp-sc", "xlnx,zynqmp";
+};
+
+&gem1 { /* gem1 MIO38-49, MDIO MIO50/51 */
+ /delete-node/ mdio;
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@1 { /* ADI1300 */
+ #phy-cells = <1>;
+ compatible = "ethernet-phy-id0283.bc30";
+ reg = <1>;
+ adi,rx-internal-delay-ps = <2400>;
+ adi,tx-internal-delay-ps = <2400>;
+ adi,fifo-depth-bits = <8>;
+ reset-gpios = <&gpio 77 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10>;
+ reset-deassert-us = <5000>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP VEK280 revA
+ *
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ compatible = "xlnx,zynqmp-sc-vek280-revA", "xlnx,zynqmp-vek280-revA",
+ "xlnx,zynqmp-vek280", "xlnx,zynqmp";
+
+ vc7_xin: vc7-xin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+};
+
+&i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tca6416_u233: gpio@20 { /* u233 */
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller; /* interrupt not connected */
+ #gpio-cells = <2>;
+ gpio-line-names = "", "", "SFP_MOD_ABS", "SFP_TX_DISABLE", /* 0 - 3 */
+ "PMBUS2_INA226_ALERT", "", "", "", /* 4 - 7 */
+ "FMCP1_FMC_PRSNT_M2C_B", "", "FMCP1_FMCP_PRSNT_M2C_B", "", /* 10 - 13 */
+ "VCCINT_VRHOT_B", "8A34001_EXP_RST_B", "PMBUS_ALERT", "PMBUS1_INA226_ALERT"; /* 14 - 17 */
+ };
+
+ i2c-mux@74 { /* u33 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ /* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+ pmbus_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* On connector J325 */
+ ir35215_46: pmic@46 { /* IR35215 - u152 */
+ compatible = "infineon,ir35215";
+ reg = <0x46>; /* i2c addr - 0x16 */
+ };
+ irps5401_47: pmic5401@47 { /* IRPS5401 - u160 */
+ compatible = "infineon,irps5401";
+ reg = <0x47>; /* i2c addr 0x17 */
+ };
+ irps5401_48: pmic@48 { /* IRPS5401 - u279 */
+ compatible = "infineon,irps5401";
+ reg = <0x48>; /* i2c addr 0x18 */
+ };
+ ir38064_49: regulator@49 { /* IR38064 - u295 */
+ compatible = "infineon,ir38064";
+ reg = <0x49>; /* i2c addr 0x19 */
+ };
+ irps5401_4c: pmic@4c { /* IRPS5401 - u167 */
+ compatible = "infineon,irps5401";
+ reg = <0x4c>; /* i2c addr 0x1c */
+ };
+ irps5401_4d: pmic@4d { /* IRPS5401 - u175 */
+ compatible = "infineon,irps5401";
+ reg = <0x4d>; /* i2c addr 0x1d */
+ };
+ ir38060_4e: regulator@4e { /* IR38060 - u282 */
+ compatible = "infineon,ir38060";
+ reg = <0x4e>; /* i2c addr 0x1e */
+ };
+ };
+ pmbus1_ina226_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* alerts coming to u233 and SC */
+ vccint: ina226@40 { /* u65 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <500>; /* r440 */
+ };
+ vcc_soc: ina226@41 { /* u161 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <500>; /* r1702 */
+ };
+ vcc_pmc: ina226@42 { /* u163 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>; /* r382 */
+ };
+ vcc_ram: ina226@43 { /* u355 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>; /* r2417 */
+ };
+ vcc_pslp: ina226@44 { /* u165 */
+ compatible = "ti,ina226";
+ reg = <0x44>;
+ shunt-resistor = <5000>; /* r1830 */
+ };
+ vcc_psfp: ina226@45 { /* u260 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>; /* r2386 */
+ };
+ vcco_hdio: ina226@46 { /* u356 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <5000>; /* r2392 */
+ };
+ };
+ i2c@2 { /* NC */ /* FIXME maybe remove */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ pmbus2_ina226_i2c: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* alerts coming to u233 and SC */
+ vccaux: ina226@40 { /* u166 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <5000>; /* r2384 */
+ };
+ vccaux_pmc: ina226@41 { /* u168 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>; /* r2000 */
+ };
+ mgtavcc: ina226@42 { /* u265 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>; /* r1829 */
+ };
+ vcc1v5: ina226@43 { /* u264 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>; /* r2397 */
+ };
+ vcco_mio: ina226@45 { /* u172 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>; /* r2401 */
+ };
+ mgtavtt: ina226@46 { /* u188 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <500>; /* r1384 */
+ };
+ vcco_502: ina226@47 { /* u174 */
+ compatible = "ti,ina226";
+ reg = <0x47>;
+ shunt-resistor = <5000>; /* r1994 */
+ };
+ mgtvccaux: ina226@48 { /* u176 */
+ compatible = "ti,ina226";
+ reg = <0x48>;
+ shunt-resistor = <5000>; /* r2384 */
+ };
+ vcc1v1_lp4: ina226@49 { /* u306 */
+ compatible = "ti,ina226";
+ reg = <0x49>;
+ shunt-resistor = <500>; /* r2064 */
+ };
+ vadj_fmc: ina226@4a { /* u281 */
+ compatible = "ti,ina226";
+ reg = <0x4a>;
+ shunt-resistor = <5000>; /* r2031 */
+ };
+ lpdmgtyavcc: ina226@4b { /* u177 */
+ compatible = "ti,ina226";
+ reg = <0x4b>;
+ shunt-resistor = <5000>; /* r2004 */
+ };
+ lpdmgtyavtt: ina226@4c { /* u309 */
+ compatible = "ti,ina226";
+ reg = <0x4c>;
+ shunt-resistor = <5000>; /* r1229 */
+ };
+ lpdmgtyvccaux: ina226@4d { /* u234 */
+ compatible = "ti,ina226";
+ reg = <0x4d>;
+ shunt-resistor = <5000>; /* r1679 */
+ };
+ };
+ i2c@4 { /* NC */ /* FIXME maybe remove */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+ rc21008a_gtclk1: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /* connector j374 */
+ /* rc21008a at 0x9 u299 */
+ vc7: clock-generator@9 {
+ compatible = "renesas,rc21008a";
+ reg = <0x9>;
+ #clock-cells = <1>;
+ clocks = <&vc7_xin>;
+ clock-names = "xin";
+ };
+ };
+ fmcp1_iic: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* to j51c */
+ };
+ sfp: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /* sfp+ connector J376 */
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP VEK280 revB
+ *
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-sc-vek280-revA.dtso"
+
+&{/} {
+ compatible = "xlnx,zynqmp-sc-vek280-revB", "xlnx,zynqmp-vek280-revB",
+ "xlnx,zynqmp-vek280", "xlnx,zynqmp";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP VHK158 revA
+ *
+ * (C) Copyright 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ compatible = "xlnx,zynqmp-sc-vhk158-revA", "xlnx,zynqmp-vhk158-revA",
+ "xlnx,zynqmp-vhk158", "xlnx,zynqmp";
+
+ vc7_xin: vc7-xin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+};
+
+&i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tca6416_u233: gpio@20 { /* u233 */
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller; /* interrupt not connected */
+ #gpio-cells = <2>;
+ gpio-line-names = "", "", "QSFPDD1_MODSELL", "QSFPDD2_MODSELL", /* 0 - 3 */
+ "PMBUS2_INA226_ALERT", "", "", "", /* 4 - 7 */
+ "FMCP1_FMC_PRSNT_M2C_B", "", "FMCP1_FMCP_PRSNT_M2C_B", "", /* 10 - 13 */
+ "VCCINT_VRHOT_B", "8A34001_EXP_RST_B", "PMBUS_ALERT", "PMBUS1_INA226_ALERT"; /* 14 - 17 */
+ };
+
+ i2c-mux@74 { /* u33 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ /* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+ pmbus_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* On connector J325 */
+ ir38064_41: regulator@41 { /* IR38064 - u294 */
+ compatible = "infineon,ir38064";
+ reg = <0x41>; /* i2c addr 0x11 */
+ };
+ irps5401_45: pmic5401@45 { /* IRPS5401 - u280 */
+ compatible = "infineon,irps5401";
+ reg = <0x45>; /* i2c addr 0x15 */
+ };
+ ir35221_46: pmic@46 { /* IR35221 - u152 */
+ compatible = "infineon,ir35221";
+ reg = <0x46>; /* i2c addr - 0x16 */
+ };
+ irps5401_47: pmic5401@47 { /* IRPS5401 - u160 */
+ compatible = "infineon,irps5401";
+ reg = <0x47>; /* i2c addr 0x17 */
+ };
+ irps5401_48: regulator@48 { /* IRPS5401 - u279 */
+ compatible = "infineon,irps5401";
+ reg = <0x48>; /* i2c addr 0x18 */
+ };
+ ir38164_49: regulator@49 { /* IR38164 - u295 */
+ compatible = "infineon,ir38164";
+ reg = <0x49>; /* i2c addr 0x19 */
+ };
+ ir38060_4a: regulator@4a { /* IR38060 - u259 */
+ compatible = "infineon,ir38164";
+ reg = <0x4a>; /* i2c addr 0x1a */
+ };
+ irps5401_4c: pmic@4c { /* IRPS5401 - u167 */
+ compatible = "infineon,irps5401";
+ reg = <0x4c>; /* i2c addr 0x1c */
+ };
+ irps5401_4d: pmic@4d { /* IRPS5401 - u175 */
+ compatible = "infineon,irps5401";
+ reg = <0x4d>; /* i2c addr 0x1d */
+ };
+ ir38060_4e: regulator@4e { /* IR38060 - u282 */
+ compatible = "infineon,ir38164";
+ reg = <0x4e>; /* i2c addr 0x1e */
+ };
+ };
+ pmbus1_ina226_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* FIXME check alerts coming to SC */
+ vccint: ina226@40 { /* u65 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <500>; /* R440 */
+ };
+ vcc_soc: ina226@41 { /* u161 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <500>; /* R1702 */
+ };
+ vcc_pmc: ina226@42 { /* u163 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>; /* R382 */
+ };
+ vcc_ram: ina226@43 { /* u5 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <500>; /* R121 */
+ };
+ vcc_pslp: ina226@44 { /* u165 */
+ compatible = "ti,ina226";
+ reg = <0x44>;
+ shunt-resistor = <5000>; /* R1830 */
+ };
+ vcc_psfp: ina226@45 { /* u260 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>; /* R1834 */
+ };
+ vcco_hbm: ina226@46 { /* u164 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <500>; /* R2056 */
+ };
+ vcc_hbm: ina226@47 { /* u307 */
+ compatible = "ti,ina226";
+ reg = <0x47>;
+ shunt-resistor = <500>; /* R2068 */
+ };
+ vccaux_hbm: ina226@48 { /* u308 */
+ compatible = "ti,ina226";
+ reg = <0x48>;
+ shunt-resistor = <5000>; /* R2019 */
+ };
+ };
+ i2c@2 { /* NC */ /* FIXME maybe remove */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ pmbus2_ina226_i2c: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* FIXME check alerts coming to SC */
+ vccaux: ina226@40 { /* u166 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <5000>; /* R2060 */
+ };
+ vccaux_pmc: ina226@41 { /* u168 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <500>; /* R2000 */
+ };
+ mgtavcc: ina226@42 { /* u265 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <500>; /* R1829 */
+ };
+ vcc1v5: ina226@43 { /* u264 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <500>; /* R1221 */
+ };
+ vcco_mio: ina226@45 { /* u172 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <500>; /* R2015 */
+ };
+ mgtavtt: ina226@46 { /* u188 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <500>; /* R1384 */
+ };
+ vcco_502: ina226@47 { /* u174 */
+ compatible = "ti,ina226";
+ reg = <0x47>;
+ shunt-resistor = <500>; /* R1994 */
+ };
+ mgtvccaux: ina226@48 { /* u176 */
+ compatible = "ti,ina226";
+ reg = <0x48>;
+ shunt-resistor = <500>; /* R1232 */
+ };
+ vcc1v2_rdimm: ina226@49 { /* u306 */
+ compatible = "ti,ina226";
+ reg = <0x49>;
+ shunt-resistor = <500>; /* R2064 */
+ };
+ vadj_fmc: ina226@4a { /* u281 */
+ compatible = "ti,ina226";
+ reg = <0x4a>;
+ shunt-resistor = <5000>; /* R2031 */
+ };
+ lpdmgtyavcc: ina226@4b { /* u177 */
+ compatible = "ti,ina226";
+ reg = <0x4b>;
+ shunt-resistor = <500>; /* R2004 */
+ };
+ lpdmgtyavtt: ina226@4c { /* u309 */
+ compatible = "ti,ina226";
+ reg = <0x4c>;
+ shunt-resistor = <500>; /* R1229 */
+ };
+ lpdmgtyvccaux: ina226@4d { /* u234 */
+ compatible = "ti,ina226";
+ reg = <0x4d>;
+ shunt-resistor = <500>; /* R1679 */
+ };
+ };
+ i2c@4 { /* NC */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+ rc21008a_gtclk1: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ vc7_1: clock-generator@9 {
+ compatible = "renesas,rc21008a";
+ clock-output-names = "rc21008a-0";
+ reg = <0x9>;
+ #clock-cells = <1>;
+ clocks = <&vc7_xin>;
+ clock-names = "xin";
+ };
+ /* i2c@9 - U299 */
+ };
+ rc21008a_gtclk2: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ vc7_2: clock-generator@9 {
+ compatible = "renesas,rc21008a";
+ clock-output-names = "rc21008a-1";
+ reg = <0x9>;
+ #clock-cells = <1>;
+ clocks = <&vc7_xin>;
+ clock-names = "xin";
+ };
+ /* i2c@9 - U300 */
+ };
+ sync_8a34001: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /* U219 - i2c address UNKNOWN */
+ };
+ };
+};
+
+&i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-mux@74 { /* u35 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ /* reset-gpios = <&gpio SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */
+ ddr4_dimm0: i2c@0 { /* wired but NC */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ fmcp1_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* FIXME connection to Samtec J51C */
+ /* expected eeprom 0x50 SE cards */
+ };
+ qsfp1_i2c: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* J350 connector */
+ };
+ qsfp2_i2c: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* J351 connector */
+ };
+ qsfp3_i2c: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ /* J352 connector */
+ };
+ qsfp4_i2c: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /* J353 connector */
+ };
+ qsfpdd_i2c: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* J1/J2 connectors */
+ };
+ ddr4_dimm1: i2c@7 { /* wired but NC */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP VN-P-B2197-00 (Tenzing2)
+ *
+ * Copyright (C) 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ compatible = "xlnx,zynqmp-sc-vn-p-b2197-revA",
+ "xlnx,zynqmp-sc-vn-p-b2197", "xlnx,zynqmp";
+
+ aliases {
+ nvmem1 = &x_prc_eeprom;
+ };
+
+ ina226-u1700 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcc_ram_ina 0>, <&vcc_ram_ina 1>, <&vcc_ram_ina 2>;
+ };
+ ina226-u1732 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcc_lpd_ina 0>, <&vcc_lpd_ina 1>, <&vcc_lpd_ina 2>;
+ };
+ ina226-u1733 {
+ compatible = "iio-hwmon";
+ io-channels = <&vccaux_ina 0>, <&vccaux_ina 1>, <&vccaux_ina 2>;
+ };
+ ina226-u1736 {
+ compatible = "iio-hwmon";
+ io-channels = <&vccaux_lpd_ina 0>, <&vccaux_lpd_ina 1>, <&vccaux_lpd_ina 2>;
+ };
+ ina226-u1737 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcco_500_ina 0>, <&vcco_500_ina 1>, <&vcco_500_ina 2>;
+ };
+ ina226-u1739 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcco_501_ina 0>, <&vcco_501_ina 1>, <&vcco_501_ina 2>;
+ };
+ ina226-u1741 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcco_502_ina 0>, <&vcco_502_ina 1>, <&vcco_502_ina 2>;
+ };
+ ina226-u1743 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcco_503_ina 0>, <&vcco_503_ina 1>, <&vcco_503_ina 2>;
+ };
+ ina226-u1745 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcco_700_ina 0>, <&vcco_700_ina 1>, <&vcco_700_ina 2>;
+ };
+ ina226-u1747 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcco_706_ina 0>, <&vcco_706_ina 1>, <&vcco_706_ina 2>;
+ };
+ ina226-u1750 {
+ compatible = "iio-hwmon";
+ io-channels = <>yp_avcc_ina 0>, <>yp_avcc_ina 1>, <>yp_avcc_ina 2>;
+ };
+ ina226-u1752 {
+ compatible = "iio-hwmon";
+ io-channels = <>yp_avtt_ina 0>, <>yp_avtt_ina 1>, <>yp_avtt_ina 2>;
+ };
+ ina226-u1754 {
+ compatible = "iio-hwmon";
+ io-channels = <>yp_avccaux_ina 0>, <>yp_avccaux_ina 1>, <>yp_avccaux_ina 2>;
+ };
+ ina226-u1756 {
+ compatible = "iio-hwmon";
+ io-channels = <>m_avcc_ina 0>, <>m_avcc_ina 1>, <>m_avcc_ina 2>;
+ };
+ ina226-u1758 {
+ compatible = "iio-hwmon";
+ io-channels = <>m_avtt_ina 0>, <>m_avtt_ina 1>, <>m_avtt_ina 2>;
+ };
+ ina226-u1760 {
+ compatible = "iio-hwmon";
+ io-channels = <>m_avccaux_ina 0>, <>m_avccaux_ina 1>, <>m_avccaux_ina 2>;
+ };
+
+ /* sc_vpk180_axi_iic_0_0: i2c@80050000 - UNUSED NOW */ /* SI5332 */
+
+ /* Connect to J212G pin G29/G30 - sysmon connector */
+ /* sc_vpk180_axi_iic_1_0: i2c@80060000 */ /* SYSMON */
+
+ /* FIXME Fan control via u1702 - max6643 and mux via J1703 - not SW controllable - via EMIO */
+};
+
+&i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* u97 eeprom at 0x54 described in sc-revB - WP protection via BOARD_EEPROM_WP - J1801 */
+ /* DC/SE eeprom at 0x52 */
+ x_prc_eeprom: eeprom@52 { /* u4 - DC card identification - possible WP */
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ bootph-all;
+ };
+
+ x_prc_tca9534: gpio@22 { /* u5 */
+ compatible = "nxp,pca9534";
+ reg = <0x22>;
+ gpio-controller; /* IRQ not connected */
+ #gpio-cells = <2>;
+ gpio-line-names = "xprc_sw_1", "xprc_sw_2", "xprc_sw_3", "xprc_sw_4",
+ "", "", "", "";
+ gtr-sel0 {
+ gpio-hog;
+ gpios = <0 0>;
+ input; /* FIXME add meaning */
+ line-name = "xprc_sw_1";
+ };
+ gtr-sel1 {
+ gpio-hog;
+ gpios = <1 0>;
+ input; /* FIXME add meaning */
+ line-name = "xprc_sw_1";
+ };
+ gtr-sel2 {
+ gpio-hog;
+ gpios = <2 0>;
+ input; /* FIXME add meaning */
+ line-name = "xprc_sw_1";
+ };
+ gtr-sel3 {
+ gpio-hog;
+ gpios = <3 0>;
+ input; /* FIXME add meaning */
+ line-name = "xprc_sw_1";
+ };
+ };
+
+ /* FMC eeproms at 0x50/0x51 */
+ /* via j3/j5 to 0x68 to u32/9FGV1006C
+
+ /* i2c_main_1 - u147 - j157 - disable translation, add 8 */
+ /* J1 - OE for u43@55 + 8 - 161,132813MHz - QSFP56G_0 */
+ qsfp56g_0_clk: clock-controller@5d {
+ compatible = "renesas,proxo-xp";
+ reg = <0x5d>;
+ #clock-cells = <0>;
+ clock-output-names = "qsfp56g_0_clk";
+ };
+
+ /* J2 - OE for u41@57 + 8 - 322,265625MHz - QSFP56G_1 */
+ qsfp56g_1_clk: clock-controller@5f {
+ compatible = "renesas,proxo-xp";
+ reg = <0x5f>;
+ #clock-cells = <0>;
+ clock-output-names = "qsfp56g_1_clk";
+ };
+
+ /* J81 - OE for u115@50 + 8 - 320MHz - LPDDR5_C0 */
+ lpddr5_c0_clk: clock-controller@58 {
+ compatible = "renesas,proxo-xp";
+ reg = <0x58>;
+ #clock-cells = <0>;
+ clock-output-names = "lpddr5_c0_clk";
+ };
+
+ /* i2c_main_2 - u148 - j122 - disable translation, add 9 */
+ /* J112 - OE for u63@50 + 9 - 320MHz - LPDDR5_C2 */
+ lpddr5_c2_clk: clock-controller@59 {
+ compatible = "renesas,proxo-xp";
+ reg = <0x59>;
+ #clock-cells = <0>;
+ clock-output-names = "lpddr5_c2_clk";
+ };
+
+ /* i2c_main_3 - u149 - j154 - disable translation, add 6 */
+ /* J78 - OE for u116@50 + 6 - 320MHz - DDR5_UDIMM */
+ ddr5_udimm_clk: clock-controller@56 {
+ compatible = "renesas,proxo-xp";
+ reg = <0x56>;
+ #clock-cells = <0>;
+ clock-output-names = "ddr5_udimm_clk";
+ };
+
+ /* i2c_main_4 - u150 - j146 - disable translation, add 5 */
+ /* J107 - OE for u39@50 + 5 - 33,3333MHz - PS_REFCLK */
+ ps_refclk: clock-controller@55 {
+ compatible = "renesas,proxo-xp";
+ reg = <0x55>;
+ #clock-cells = <0>;
+ clock-output-names = "ps_refclk";
+ };
+
+ /* i2c_main_5 - u1782 - j1798 - disable translation, add 7 */
+ /* J77 - OE for u1783@50 + 7 - 320MHz - DDR4 */
+ ddr4_clk: clock-controller@57 {
+ compatible = "renesas,proxo-xp";
+ reg = <0x57>;
+ #clock-cells = <0>;
+ clock-output-names = "ddr4_clk";
+ };
+
+ /* LTC4316 - not wired XORH/XORL - FIXME */
+ /* J3 gate - FIXME should be connected for SW handling */
+ /* i2c_main_1 bus */
+ i2c1_u32: clock-controller@68 {
+ compatible = "renesas,9fgv1006";
+ reg = <0x68>;
+ };
+
+ /* J71 - selection to LP_I2C_SCL_J or LP_I2C_PMC_SCL_J */
+ /* J70 - selection to LP_I2C_SDA_J or LP_I2C_PMC_SDA_J */
+ /* this should be SW controlable too */
+};
+
+&i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Via j11/j12 can also go to u17/IML3112 - 1:2 multiplexer - also accessed from Versal NET */
+ /* Connection DDR5_UDIMM - SPD can be from 0x50-0x57 */
+ /* FIXME gpio should handle SYSCTLR_PMBUS_ALERT and also INA226_PMBUS_ALERT */
+
+ /* ina226_pmbus - J55 - disable INA226_PMBUS */
+ vcc_ram_ina: power-monitor@40 { /* u1700 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ reg = <0x40>;
+ shunt-resistor = <1000>; /* R1996 */
+ };
+
+ vcc_lpd_ina: power-monitor@41 { /* u1732 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ reg = <0x41>;
+ shunt-resistor = <1000>; /* R2017 */
+ };
+
+ vccaux_ina: power-monitor@42 { /* u1733 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ reg = <0x42>;
+ shunt-resistor = <1000>; /* R2037 */
+ };
+
+ vccaux_lpd_ina: power-monitor@43 { /* u1736 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ reg = <0x43>;
+ shunt-resistor = <1000>; /* R2057 */
+ };
+
+ vcco_500_ina: power-monitor@44 { /* u1737 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ reg = <0x44>;
+ shunt-resistor = <1000>; /* R2069 */
+ };
+
+ vcco_501_ina: power-monitor@45 { /* u1739 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ reg = <0x45>;
+ shunt-resistor = <1000>; /* R2089 */
+ };
+
+ vcco_502_ina: power-monitor@46 { /* u1741 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ reg = <0x46>;
+ shunt-resistor = <1000>; /* R2108 */
+ };
+
+ vcco_503_ina: power-monitor@47 { /* u1743 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ reg = <0x47>;
+ shunt-resistor = <1000>; /* R2127 */
+ };
+
+ vcco_700_ina: power-monitor@48 { /* u1745 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ reg = <0x48>;
+ shunt-resistor = <1000>; /* R2154 */
+ };
+
+ vcco_706_ina: power-monitor@49 { /* u1747 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ reg = <0x49>;
+ shunt-resistor = <1000>; /* R2175 */
+ };
+
+ gtyp_avcc_ina: power-monitor@4a { /* u1750 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ reg = <0x4a>;
+ shunt-resistor = <1000>; /* R2195 */
+ };
+
+ gtyp_avtt_ina: power-monitor@4b { /* u1752 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ reg = <0x4b>;
+ shunt-resistor = <1000>; /* R2215 */
+ };
+
+ gtyp_avccaux_ina: power-monitor@4c { /* u1754 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ reg = <0x4c>;
+ shunt-resistor = <5000>; /* R2235 */
+ };
+
+ gtm_avcc_ina: power-monitor@4d { /* u1756 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ reg = <0x4d>;
+ shunt-resistor = <1000>; /* R2256 */
+ };
+
+ gtm_avtt_ina: power-monitor@4e { /* u1758 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ reg = <0x4e>;
+ shunt-resistor = <1000>; /* R2276 */
+ };
+
+ gtm_avccaux_ina: power-monitor@4f { /* u1760 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ reg = <0x4f>;
+ shunt-resistor = <5000>; /* R2296 */
+ };
+
+ /* pmbus - J50 - disable main PMBUS - also going to j132 */
+ vcc_ram: regulator@a { /* u1730 */
+ compatible = "ti,tps544b25";
+ reg = <0xa>;
+ };
+
+ vcc_lpd: regulator@b { /* u1731 */
+ compatible = "ti,tps544b25";
+ reg = <0xb>;
+ };
+
+ vccaux: regulator@1a { /* u1734 */
+ compatible = "ti,tps544b25";
+ reg = <0x1a>;
+ };
+
+ vcco_503: regulator@12 { /* u1744 */
+ compatible = "ti,tps546b24a";
+ reg = <0x12>;
+ };
+
+ vcco_700: regulator@16 { /* u1746 */
+ compatible = "ti,tps544b25";
+ reg = <0x16>;
+ };
+
+ vcco_706: regulator@17 { /* u1748 */
+ compatible = "ti,tps544b25";
+ reg = <0x17>;
+ };
+
+ gtm_avcc: regulator@23 { /* u1755 */
+ compatible = "ti,tps544b25";
+ reg = <0x23>;
+ };
+
+ gtm_avtt: regulator@24 { /* u1757 */
+ compatible = "ti,tps544b25";
+ reg = <0x24>;
+ };
+
+ gtm_avccaux: regulator@25 { /* u1759 */
+ compatible = "ti,tps544b25";
+ reg = <0x25>;
+ };
+
+ util_1v8: regulator@15 { /* u1765 */
+ compatible = "ti,tps544b25";
+ reg = <0x15>;
+ };
+
+ ucd90320: power-sequencer@73 { /* u1768 */
+ compatible = "ti,ucd90320";
+ reg = <0x73>;
+ };
+
+ /* EXT_PMBUS main - J10 - disable extended PMBUS */
+ vccint: tps53681@60 { /* u1712 - J1770 reset jumper */
+ compatible = "ti,tps53681", "ti,tps53679";
+ reg = <0x60>;
+ /* vccint, vcc_cpm5n */
+ };
+
+ vcc_io_soc: tps53681@61 { /* u1721 - J1772 reset jumper */
+ compatible = "ti,tps53681", "ti,tps53679";
+ reg = <0x61>;
+ /* vcc_io_soc, vcc_fpd */
+ };
+
+ vccaux_lpd: regulator@d { /* u1735 */
+ compatible = "ti,tps544b25";
+ reg = <0xd>;
+ };
+
+ vcco_500: regulator@13 { /* u1738 */
+ compatible = "ti,tps546b24a";
+ reg = <0x13>;
+ };
+
+ vcco_501: regulator@10 { /* u1740 */
+ compatible = "ti,tps546b24a";
+ reg = <0x10>;
+ };
+
+ vcco_502: regulator@11 { /* u1742 */
+ compatible = "ti,tps546b24a";
+ reg = <0x11>;
+ };
+
+ gtyp_avcc: regulator@20 { /* u1749 */
+ compatible = "ti,tps544b25";
+ reg = <0x20>;
+ };
+
+ gtyp_avtt: regulator@21 { /* u1751 */
+ compatible = "ti,tps544b25";
+ reg = <0x21>;
+ };
+
+ gtyp_avccaux: regulator@22 { /* u1753 */
+ compatible = "ti,tps544b25";
+ reg = <0x22>;
+ };
+
+ lp5_vdd1_1v8: regulator@e { /* u1761 - FIXME no ina226 */
+ compatible = "ti,tps544b25";
+ reg = <0xe>;
+ };
+
+ lp5_vdd2_1v05: regulator@f { /* u1762 - FIXME no ina226 */
+ compatible = "ti,tps544b25";
+ reg = <0xf>;
+ };
+
+ lp5_vddq_0v5: regulator@14 { /* u1763 - FIXME no ina226 */
+ compatible = "ti,tps546b24a";
+ reg = <0x14>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP VPK120 revB
+ *
+ * (C) Copyright 2021 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+
+&{/} {
+ compatible = "xlnx,zynqmp-sc-vpk120-revB", "xlnx,zynqmp-vpk120-revB",
+ "xlnx,zynqmp-vpk120", "xlnx,zynqmp";
+};
+
+&i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tca6416_u233: gpio@20 { /* u233 */
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller; /* interrupt not connected */
+ #gpio-cells = <2>;
+ gpio-line-names = "", "", "QSFPDD1_MODSELL", "QSFPDD2_MODSELL", /* 0 - 3 */
+ "PMBUS2_INA226_ALERT", "", "", "", /* 4 - 7 */
+ "FMCP1_FMC_PRSNT_M2C_B", "", "FMCP1_FMCP_PRSNT_M2C_B", "", /* 10 - 13 */
+ "VCCINT_VRHOT_B", "8A34001_EXP_RST_B", "PMBUS_ALERT", "PMBUS1_INA226_ALERT"; /* 14 - 17 */
+ };
+
+ i2c-mux@74 { /* u33 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ /* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+ pmbus_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* On connector J325 */
+ ir38060_41: regulator@41 { /* IR38060 - u259 */
+ compatible = "infineon,ir38060", "infineon,ir38064";
+ reg = <0x41>; /* i2c addr 0x11 */
+ };
+ ir38164_43: regulator@43 { /* IR38164 - u13 */
+ compatible = "infineon,ir38164";
+ reg = <0x43>; /* i2c addr 0x13 */
+ };
+ ir35221_46: pmic@46 { /* IR35221 - u152 */
+ compatible = "infineon,ir35221";
+ reg = <0x46>; /* i2c addr - 0x16 */
+ };
+ irps5401_47: pmic5401@47 { /* IRPS5401 - u160 */
+ compatible = "infineon,irps5401";
+ reg = <0x47>; /* i2c addr 0x17 */
+ };
+ ir38164_49: regulator@49 { /* IR38164 - u189 */
+ compatible = "infineon,ir38164";
+ reg = <0x49>; /* i2c addr 0x19 */
+ };
+ irps5401_4c: pmic@4c { /* IRPS5401 - u167 */
+ compatible = "infineon,irps5401";
+ reg = <0x4c>; /* i2c addr 0x1c */
+ };
+ irps5401_4d: pmic@4d { /* IRPS5401 - u175 */
+ compatible = "infineon,irps5401";
+ reg = <0x4d>; /* i2c addr 0x1d */
+ };
+ ir38164_4e: regulator@4e { /* IR38164 - u185 */
+ compatible = "infineon,ir38164";
+ reg = <0x4e>; /* i2c addr 0x1e */
+ };
+ ir38164_4f: regulator@4f { /* IR38164 - u187 */
+ compatible = "infineon,ir38164";
+ reg = <0x4f>; /* i2c addr 0x1f */
+ };
+ };
+ pmbus1_ina226_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* FIXME check alerts coming to SC */
+ vccint: ina226@40 { /* u65 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <5000>;
+ };
+ vcc_soc: ina226@41 { /* u161 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+ vcc_pmc: ina226@42 { /* u163 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>;
+ };
+ vcc_ram: ina226@43 { /* u5 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>;
+ };
+ vcc_pslp: ina226@44 { /* u165 */
+ compatible = "ti,ina226";
+ reg = <0x44>;
+ shunt-resistor = <5000>;
+ };
+ vcc_psfp: ina226@45 { /* u164 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>;
+ };
+ };
+ i2c@2 { /* NC */ /* FIXME maybe remove */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ pmbus2_ina226_i2c: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* FIXME check alerts coming to SC */
+ vccaux: ina226@40 { /* u166 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <5000>;
+ };
+ vccaux_pmc: ina226@41 { /* u168 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+ mgtavcc: ina226@42 { /* u265 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>;
+ };
+ vcc1v5: ina226@43 { /* u264 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>;
+ };
+ vcco_mio: ina226@45 { /* u172 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>;
+ };
+ mgtavtt: ina226@46 { /* u188 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <2000>;
+ };
+ vcco_502: ina226@47 { /* u174 */
+ compatible = "ti,ina226";
+ reg = <0x47>;
+ shunt-resistor = <5000>;
+ };
+ mgtvccaux: ina226@48 { /* u176 */
+ compatible = "ti,ina226";
+ reg = <0x48>;
+ shunt-resistor = <5000>;
+ };
+ vcc1v1_lp4: ina226@49 { /* u186 */
+ compatible = "ti,ina226";
+ reg = <0x49>;
+ shunt-resistor = <2000>;
+ };
+ vadj_fmc: ina226@4a { /* u184 */
+ compatible = "ti,ina226";
+ reg = <0x4a>;
+ shunt-resistor = <2000>;
+ };
+ lpdmgtyavcc: ina226@4b { /* u177 */
+ compatible = "ti,ina226";
+ reg = <0x4b>;
+ shunt-resistor = <5000>;
+ };
+ lpdmgtyavtt: ina226@4c { /* u260 */
+ compatible = "ti,ina226";
+ reg = <0x4c>;
+ shunt-resistor = <2000>;
+ };
+ lpdmgtyvccaux: ina226@4d { /* u234 */
+ compatible = "ti,ina226";
+ reg = <0x4d>;
+ shunt-resistor = <5000>;
+ };
+ };
+ i2c@4 { /* NC */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+ i2c@5 { /* NC */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+ user_si570: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ user_si570_1: clock-generator@5f { /* USER C0 SI570 - u205 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5f>;
+ temperature-stability = <50>;
+ factory-fout = <100000000>;
+ clock-frequency = <100000000>;
+ clock-output-names = "fmc_si570";
+ silabs,skip-recall;
+ };
+
+ };
+ /* 7 unused */
+ };
+};
+
+&i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-mux@74 { /* u35 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ /* reset-gpios = <&gpio SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */
+ ref_clk_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ ref_clk: clock-generator@5d { /* u32 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <33333333>;
+ clock-frequency = <33333333>;
+ clock-output-names = "ref_clk";
+ silabs,skip-recall;
+ };
+ };
+ fmcp1_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* FIXME connection to Samtec J51C */
+ /* expected eeprom 0x50 SE cards */
+ };
+ i2c@2 { /* NC - FIXME */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ lpddr4_si570_clk3_i2c: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ lpddr4_clk3: clock-generator@60 { /* u4 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x60>;
+ temperature-stability = <50>;
+ factory-fout = <200000000>;
+ clock-frequency = <200000000>;
+ clock-output-names = "lpddr4_clk3";
+ silabs,skip-recall;
+ };
+ };
+ lpddr4_si570_clk2_i2c: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ lpddr4_clk2: clock-generator@60 { /* u3 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x60>;
+ temperature-stability = <50>;
+ factory-fout = <200000000>;
+ clock-frequency = <200000000>;
+ clock-output-names = "lpddr4_clk2";
+ silabs,skip-recall;
+ };
+ };
+ lpddr4_si570_clk1_i2c: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ lpddr4_clk1: clock-generator@60 { /* u248 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x60>;
+ temperature-stability = <50>;
+ factory-fout = <200000000>;
+ clock-frequency = <200000000>;
+ clock-output-names = "lpddr4_clk1";
+ silabs,skip-recall;
+ };
+ };
+ qsfpdd_i2c: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* J1/J2 connectors */
+ };
+ idt8a34001_i2c: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /* Via J310 connector */
+ idt_8a34001: phc@5b {
+ compatible = "idt,8a34001"; /* u219B */
+ reg = <0x5b>; /* FIXME not in schematics */
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP VPK180 revA
+ *
+ * (C) Copyright 2021 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+
+&{/} {
+ compatible = "xlnx,zynqmp-sc-vpk180-revA", "xlnx,zynqmp-vpk180-revA",
+ "xlnx,zynqmp-vpk180", "xlnx,zynqmp";
+};
+
+&i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tca6416_u233: gpio@20 { /* u233 */
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller; /* interrupt not connected */
+ #gpio-cells = <2>;
+ gpio-line-names = "QSFPDD1_MODSELL", "QSFPDD2_MODSELL", "QSFPDD3_MODSELL", "QSFPDD4_MODSELL", /* 0 - 3 */
+ "PMBUS2_INA226_ALERT", "QSFPDD5_MODSELL", "QSFPDD6_MODSELL", "", /* 4 - 7 */
+ "FMCP1_FMC_PRSNT_M2C_B", "", "FMCP1_FMCP_PRSNT_M2C_B", "UTIL_3V3_VRHOT_B", /* 10 - 13 */
+ "VCCINT_VRHOT_B", "8A34001_EXP_RST_B", "PMBUS_ALERT", "PMBUS1_INA226_ALERT"; /* 14 - 17 */
+ };
+
+ i2c-mux@74 { /* u33 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ /* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+ pmbus_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* On connector J325 */
+ ir38060_41: regulator@41 { /* IR38060 - u259 */
+ compatible = "infineon,ir38060", "infineon,ir38064";
+ reg = <0x41>; /* i2c addr 0x11 */
+ };
+ ir35221_45: pmic@45 { /* IR35221 - u291 */
+ compatible = "infineon,ir35221";
+ reg = <0x45>; /* i2c addr - 0x15 */
+ };
+ ir35221_46: pmic@46 { /* IR35221 - u152 */
+ compatible = "infineon,ir35221";
+ reg = <0x46>; /* i2c addr - 0x16 */
+ };
+ irps5401_47: pmic5401@47 { /* IRPS5401 - u160 */
+ compatible = "infineon,irps5401";
+ reg = <0x47>; /* i2c addr 0x17 */
+ };
+ irps5401_48: pmic@48 { /* IRPS5401 - u295 */
+ compatible = "infineon,irps5401";
+ reg = <0x48>; /* i2c addr 0x18 */
+ };
+ ir38164_49: regulator@49 { /* IR38164 - u189 */
+ compatible = "infineon,ir38164";
+ reg = <0x49>; /* i2c addr 0x19 */
+ };
+ irps5401_4c: pmic@4c { /* IRPS5401 - u167 */
+ compatible = "infineon,irps5401";
+ reg = <0x4c>; /* i2c addr 0x1c */
+ };
+ irps5401_4d: pmic@4d { /* IRPS5401 - u175 */
+ compatible = "infineon,irps5401";
+ reg = <0x4d>; /* i2c addr 0x1d */
+ };
+ ir38164_4e: regulator@4e { /* IR38164 - u185 */
+ compatible = "infineon,ir38164";
+ reg = <0x4e>; /* i2c addr 0x1e */
+ };
+ ir38164_4f: regulator@4f { /* IR38164 - u187 */
+ compatible = "infineon,ir38164";
+ reg = <0x4f>; /* i2c addr 0x1f */
+ };
+ };
+ pmbus1_ina226_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* FIXME check alerts coming to SC */
+ vccint: ina226@40 { /* u65 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <5000>; /* r440 */
+ };
+ vcc_soc: ina226@41 { /* u161 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>; /* r2174 */
+ };
+ vcc_pmc: ina226@42 { /* u163 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>; /* r1214 */
+ };
+ vcc_ram: ina226@43 { /* u5 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>; /* r2108 */
+ };
+ vcc_pslp: ina226@44 { /* u165 */
+ compatible = "ti,ina226";
+ reg = <0x44>;
+ shunt-resistor = <5000>; /* r1830 */
+ };
+ vcc_psfp: ina226@45 { /* u164 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>; /* r2086 */
+ };
+ };
+ i2c@2 { /* NC */ /* FIXME maybe remove */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ pmbus2_ina226_i2c: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* FIXME check alerts coming to SC */
+ vccaux: ina226@40 { /* u166 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <2000>; /* r2109 */
+ };
+ vccaux_pmc: ina226@41 { /* u168 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>; /* r1246 */
+ };
+ mgtavcc: ina226@42 { /* u265 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>; /* r1829 */
+ };
+ vcc1v5: ina226@43 { /* u264 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>; /* r1221 */
+ };
+ vcco_mio: ina226@45 { /* u172 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>; /* r1219 */
+ };
+ mgtavtt: ina226@46 { /* u188 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <2000>; /* r1384 */
+ };
+ vcco_502: ina226@47 { /* u174 */
+ compatible = "ti,ina226";
+ reg = <0x47>;
+ shunt-resistor = <5000>; /* r1825 */
+ };
+ mgtvccaux: ina226@48 { /* u176 */
+ compatible = "ti,ina226";
+ reg = <0x48>;
+ shunt-resistor = <5000>; /* r1232 */
+ };
+ vcc1v1_lp4: ina226@49 { /* u186 */
+ compatible = "ti,ina226";
+ reg = <0x49>;
+ shunt-resistor = <2000>; /* r1367 */
+ };
+ vadj_fmc: ina226@4a { /* u184 */
+ compatible = "ti,ina226";
+ reg = <0x4a>;
+ shunt-resistor = <2000>; /* r1350 */
+ };
+ lpdmgtyavcc: ina226@4b { /* u177 */
+ compatible = "ti,ina226";
+ reg = <0x4b>;
+ shunt-resistor = <5000>; /* r2097 */
+ };
+ lpdmgtyavtt: ina226@4c { /* u260 */
+ compatible = "ti,ina226";
+ reg = <0x4c>;
+ shunt-resistor = <2000>; /* r1834 */
+ };
+ lpdmgtyvccaux: ina226@4d { /* u234 */
+ compatible = "ti,ina226";
+ reg = <0x4d>;
+ shunt-resistor = <5000>; /* r1679 */
+ };
+ };
+ /* 4 - 7 unused */
+ };
+};
+
+&i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-mux@74 { /* u35 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ i2c-mux-idle-disconnect;
+ /* reset-gpios = <&PL_GPIO SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */
+ ref_clk_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ ref_clk: clock-generator@5d { /* u32 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <33333333>;
+ clock-frequency = <33333333>;
+ clock-output-names = "ref_clk";
+ silabs,skip-recall;
+ };
+ };
+ fmcp1_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* connection to Samtec J51C */
+ /* expected eeprom 0x50 SE cards */
+ };
+ osfp_i2c: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* J362 connector */
+ };
+ lpddr4_si570_clk3_i2c: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ lpddr4_clk3: clock-generator@60 { /* u4 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x60>;
+ temperature-stability = <50>;
+ factory-fout = <200000000>;
+ clock-frequency = <200000000>;
+ clock-output-names = "lpddr4_clk3";
+ silabs,skip-recall;
+ };
+ /* alternative option DNP - u305 at 0x50 */
+ };
+ lpddr4_si570_clk2_i2c: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ lpddr4_clk2: clock-generator@60 { /* u3 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x60>;
+ temperature-stability = <50>;
+ factory-fout = <200000000>;
+ clock-frequency = <200000000>;
+ clock-output-names = "lpddr4_clk2";
+ silabs,skip-recall;
+ };
+ /* alternative option DNP - u303 at 0x50 */
+ };
+ lpddr4_si570_clk1_i2c: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ lpddr4_clk1: clock-generator@60 { /* u248 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x60>;
+ temperature-stability = <50>;
+ factory-fout = <200000000>;
+ clock-frequency = <200000000>;
+ clock-output-names = "lpddr4_clk1";
+ silabs,skip-recall;
+ };
+ /* alternative option DNP - u301 at 0x50 */
+ };
+ qsfpdd_i2c: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* J1/J2/J355/J354/J359/J358 connectors */
+ };
+ idt8a34001_i2c: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /* Via J310 connector */
+ idt_8a34001: phc@5b { /* u219B */
+ compatible = "idt,8a34001";
+ reg = <0x5b>;
+ };
+ };
+ };
+ i2c-mux@75 { /* u322 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c-mux-idle-disconnect;
+ /* reset-gpios = <&PL_GPIO SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */
+ sfpdd1_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* J350 sfp-dd at 0x50 */
+ };
+ sfpdd2_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* J352 sfp-dd at 0x50 */
+ };
+ sfpdd3_i2c: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* J385 sfp-dd at 0x50 */
+ };
+ sfpdd4_i2c: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* J387 sfp-dd at 0x50 */
+ };
+ rc21008a_gtclk1_i2c: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ vc7_1: clock-generator@9 {
+ compatible = "renesas,rc21008a";
+ clock-output-names = "rc21008a-0";
+ reg = <0x9>;
+ #clock-cells = <1>;
+ clocks = <&vc7_xin>;
+ clock-names = "xin";
+ };
+ /* u298 - rc21008a at 0x9 */
+ /* connector J370 */
+ };
+ rc21008a_gtclk2_i2c: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ vc7_2: clock-generator@9 {
+ compatible = "renesas,rc21008a";
+ clock-output-names = "rc21008a-1";
+ reg = <0x9>;
+ #clock-cells = <1>;
+ clocks = <&vc7_xin>;
+ clock-names = "xin";
+ };
+ /* u299 - rc21008a at 0x9 */
+ /* connector J371 */
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP VPK180 revA
+ *
+ * (C) Copyright 2021 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+
+&{/} {
+ compatible = "xlnx,zynqmp-sc-vpk180-revB", "xlnx,zynqmp-vpk180-revB",
+ "xlnx,zynqmp-vpk180", "xlnx,zynqmp";
+
+ vc7_xin: vc7-xin {
+ compatible = "fixed-clock";
+ #clock-cells = <0x0>;
+ clock-frequency = <50000000>;
+ };
+};
+
+&i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tca6416_u233: gpio@20 { /* u233 */
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller; /* interrupt not connected */
+ #gpio-cells = <2>;
+ gpio-line-names = "QSFPDD1_MODSELL", "QSFPDD2_MODSELL", "QSFPDD3_MODSELL", "QSFPDD4_MODSELL", /* 0 - 3 */
+ "PMBUS2_INA226_ALERT", "QSFPDD5_MODSELL", "QSFPDD6_MODSELL", "", /* 4 - 7 */
+ "FMCP1_FMC_PRSNT_M2C_B", "", "FMCP1_FMCP_PRSNT_M2C_B", "UTIL_3V3_VRHOT_B", /* 10 - 13 */
+ "VCCINT_VRHOT_B", "8A34001_EXP_RST_B", "PMBUS_ALERT", "PMBUS1_INA226_ALERT"; /* 14 - 17 */
+ };
+
+ i2c-mux@74 { /* u33 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ /* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+ pmbus_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* On connector J325 */
+ ir38060_41: regulator@41 { /* IR38060 - u259 */
+ compatible = "infineon,ir38060", "infineon,ir38064";
+ reg = <0x41>; /* i2c addr 0x11 */
+ };
+ ir35221_45: pmic@45 { /* IR35221 - u291 */
+ compatible = "infineon,ir35221";
+ reg = <0x45>; /* i2c addr - 0x15 */
+ };
+ ir35221_46: pmic@46 { /* IR35221 - u152 */
+ compatible = "infineon,ir35221";
+ reg = <0x46>; /* i2c addr - 0x16 */
+ };
+ irps5401_47: pmic5401@47 { /* IRPS5401 - u160 */
+ compatible = "infineon,irps5401";
+ reg = <0x47>; /* i2c addr 0x17 */
+ };
+ irps5401_48: pmic@48 { /* IRPS5401 - u295 */
+ compatible = "infineon,irps5401";
+ reg = <0x48>; /* i2c addr 0x18 */
+ };
+ ir38164_49: regulator@49 { /* IR38164 - u189 */
+ compatible = "infineon,ir38164";
+ reg = <0x49>; /* i2c addr 0x19 */
+ };
+ irps5401_4c: pmic@4c { /* IRPS5401 - u167 */
+ compatible = "infineon,irps5401";
+ reg = <0x4c>; /* i2c addr 0x1c */
+ };
+ irps5401_4d: pmic@4d { /* IRPS5401 - u175 */
+ compatible = "infineon,irps5401";
+ reg = <0x4d>; /* i2c addr 0x1d */
+ };
+ ir38164_4e: regulator@4e { /* IR38164 - u185 */
+ compatible = "infineon,ir38164";
+ reg = <0x4e>; /* i2c addr 0x1e */
+ };
+ ir38164_4f: regulator@4f { /* IR38164 - u187 */
+ compatible = "infineon,ir38164";
+ reg = <0x4f>; /* i2c addr 0x1f */
+ };
+ };
+ pmbus1_ina226_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* FIXME check alerts coming to SC */
+ vccint: ina226@40 { /* u65 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <5000>; /* r440 */
+ };
+ vcc_soc: ina226@41 { /* u161 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>; /* r2174 */
+ };
+ vcc_pmc: ina226@42 { /* u163 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>; /* r1214 */
+ };
+ vcc_ram: ina226@43 { /* u5 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>; /* r2108 */
+ };
+ vcc_pslp: ina226@44 { /* u165 */
+ compatible = "ti,ina226";
+ reg = <0x44>;
+ shunt-resistor = <5000>; /* r1830 */
+ };
+ vcc_psfp: ina226@45 { /* u164 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>; /* r2086 */
+ };
+ };
+ i2c@2 { /* NC */ /* FIXME maybe remove */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ pmbus2_ina226_i2c: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* FIXME check alerts coming to SC */
+ vccaux: ina226@40 { /* u166 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <2000>; /* r2109 */
+ };
+ vccaux_pmc: ina226@41 { /* u168 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>; /* r1246 */
+ };
+ mgtavcc: ina226@42 { /* u265 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>; /* r1829 */
+ };
+ vcc1v5: ina226@43 { /* u264 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>; /* r1221 */
+ };
+ vcco_mio: ina226@45 { /* u172 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>; /* r1219 */
+ };
+ mgtavtt: ina226@46 { /* u188 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <2000>; /* r1384 */
+ };
+ vcco_502: ina226@47 { /* u174 */
+ compatible = "ti,ina226";
+ reg = <0x47>;
+ shunt-resistor = <5000>; /* r1825 */
+ };
+ mgtvccaux: ina226@48 { /* u176 */
+ compatible = "ti,ina226";
+ reg = <0x48>;
+ shunt-resistor = <5000>; /* r1232 */
+ };
+ vcc1v1_lp4: ina226@49 { /* u186 */
+ compatible = "ti,ina226";
+ reg = <0x49>;
+ shunt-resistor = <2000>; /* r1367 */
+ };
+ vadj_fmc: ina226@4a { /* u184 */
+ compatible = "ti,ina226";
+ reg = <0x4a>;
+ shunt-resistor = <2000>; /* r1350 */
+ };
+ lpdmgtyavcc: ina226@4b { /* u177 */
+ compatible = "ti,ina226";
+ reg = <0x4b>;
+ shunt-resistor = <5000>; /* r2097 */
+ };
+ lpdmgtyavtt: ina226@4c { /* u260 */
+ compatible = "ti,ina226";
+ reg = <0x4c>;
+ shunt-resistor = <2000>; /* r1834 */
+ };
+ lpdmgtyvccaux: ina226@4d { /* u234 */
+ compatible = "ti,ina226";
+ reg = <0x4d>;
+ shunt-resistor = <5000>; /* r1679 */
+ };
+ };
+ /* 4 - 7 unused */
+ };
+};
+
+&i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-mux@74 { /* u35 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ i2c-mux-idle-disconnect;
+ /* reset-gpios = <&PL_GPIO SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ fmcp1_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* connection to Samtec J51C */
+ /* expected eeprom 0x50 SE cards */
+ };
+ osfp_i2c: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* J362 connector */
+ };
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* alternative option DNP - u305 at 0x50 */
+ };
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ /* alternative option DNP - u303 at 0x50 */
+ };
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /* alternative option DNP - u301 at 0x50 */
+ };
+ qsfpdd_i2c: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* J1/J2/J355/J354/J359/J358 connectors */
+ };
+ idt8a34001_i2c: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /* Via J310 connector */
+ idt_8a34001: phc@5b { /* u219B */
+ compatible = "idt,8a34001";
+ reg = <0x5b>;
+ };
+ };
+ };
+ i2c-mux@75 { /* u322 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c-mux-idle-disconnect;
+ /* reset-gpios = <&PL_GPIO SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */
+ sfpdd1_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* J350 sfp-dd at 0x50 */
+ };
+ sfpdd2_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* J352 sfp-dd at 0x50 */
+ };
+ sfpdd3_i2c: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* J385 sfp-dd at 0x50 */
+ };
+ sfpdd4_i2c: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* J387 sfp-dd at 0x50 */
+ };
+ rc21008a_gtclk1_i2c: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ vc7_1: clock-generator@9 {
+ compatible = "renesas,rc21008a";
+ clock-output-names = "rc21008a-0";
+ reg = <0x9>;
+ #clock-cells = <1>;
+ clocks = <&vc7_xin>;
+ clock-names = "xin";
+ };
+ /* u298 - rc21008a at 0x9 */
+ /* connector J370 */
+ };
+ rc21008a_gtclk2_i2c: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ vc7_2: clock-generator@9 {
+ compatible = "renesas,rc21008a";
+ clock-output-names = "rc21008a-1";
+ reg = <0x9>;
+ #clock-cells = <1>;
+ clocks = <&vc7_xin>;
+ clock-names = "xin";
+ };
+ /* u299 - rc21008a at 0x9 */
+ /* connector J371 */
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for KD240 revA Carrier Card
+ *
+ * Copyright (C) 2021 - 2022, Xilinx, Inc.
+ * Copyright (C) 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ compatible = "xlnx,zynqmp-sk-kd240-rev1",
+ "xlnx,zynqmp-sk-kd240-revB",
+ "xlnx,zynqmp-sk-kd240-revA",
+ "xlnx,zynqmp-sk-kd240", "xlnx,zynqmp";
+ model = "ZynqMP KD240 revA/B/1";
+
+ ina260-u3 {
+ compatible = "iio-hwmon";
+ io-channels = <&u3 0>, <&u3 1>, <&u3 2>;
+ };
+
+ clk_26: clock2 { /* u17 - USB */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+};
+
+&can0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_default>;
+};
+
+&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ u3: ina260@40 { /* u3 */
+ compatible = "ti,ina260";
+ #io-channel-cells = <1>;
+ label = "ina260-u14";
+ reg = <0x40>;
+ };
+
+ slg7xl45106: gpio@11 { /* u13 - reset logic */
+ compatible = "dlg,slg7xl45106";
+ reg = <0x11>;
+ label = "resetchip";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "USB0_PHY_RESET_B", "",
+ "SD_RESET_B", "USB0_HUB_RESET_B",
+ "", "PS_GEM0_RESET_B",
+ "", "";
+ };
+
+ /* usb5744@2d */
+};
+
+/* USB 3.0 */
+&psgtr {
+ status = "okay";
+ /* usb */
+ clocks = <&clk_26>;
+ clock-names = "ref2";
+};
+
+&usb0 { /* mio52 - mio63 */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
+ phy-names = "usb3-phy";
+ phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+ reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>;
+ assigned-clock-rates = <250000000>, <20000000>;
+
+ usbhub0: usb-hub { /* u36 */
+ i2c-bus = <&i2c1>;
+ compatible = "microchip,usb5744";
+ reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+ };
+
+ usb2244: usb-sd { /* u41 */
+ compatible = "microchip,usb2244";
+ reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "host";
+ snps,usb3_lpm_capable;
+ maximum-speed = "super-speed";
+};
+
+&gem1 { /* mdio mio50/51 */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem1_default>;
+ assigned-clock-rates = <250000000>;
+
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@8 { /* Adin u31 */
+ reg = <8>;
+ adi,rx-internal-delay-ps = <2000>;
+ adi,tx-internal-delay-ps = <2000>;
+ adi,fifo-depth-bits = <8>;
+ reset-assert-us = <10>;
+ reset-deassert-us = <5000>;
+ reset-gpios = <&gpio 77 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+/* 2 more ethernet phys u32@2 and u34@3 */
+
+&pinctrl0 { /* required by spec */
+ status = "okay";
+
+ pinctrl_can0_default: can0-default {
+ mux {
+ function = "can0";
+ groups = "can0_16_grp";
+ };
+
+ conf {
+ groups = "can0_16_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO66";
+ bias-pull-up;
+ };
+
+ conf-tx {
+ pins = "MIO67";
+ bias-pull-up;
+ drive-strength = <4>;
+ };
+ };
+
+ pinctrl_uart0_default: uart0-default {
+ conf {
+ groups = "uart0_17_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ drive-strength = <12>;
+ };
+
+ conf-rx {
+ pins = "MIO70";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO71";
+ bias-disable;
+ };
+
+ mux {
+ groups = "uart0_17_grp";
+ function = "uart0";
+ };
+ };
+
+ pinctrl_uart1_default: uart1-default {
+ conf {
+ groups = "uart1_9_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ drive-strength = <12>;
+ };
+
+ conf-rx {
+ pins = "MIO37";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO36";
+ bias-disable;
+ output-enable;
+ };
+
+ mux {
+ groups = "uart1_9_grp";
+ function = "uart1";
+ };
+ };
+
+ pinctrl_i2c1_default: i2c1-default {
+ conf {
+ groups = "i2c1_6_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux {
+ groups = "i2c1_6_grp";
+ function = "i2c1";
+ };
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ conf {
+ groups = "gpio0_24_grp", "gpio0_25_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux {
+ groups = "gpio0_24_grp", "gpio0_25_grp";
+ function = "gpio0";
+ };
+ };
+
+ pinctrl_gem1_default: gem1-default {
+ conf {
+ groups = "ethernet1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO45", "MIO46", "MIO47", "MIO48";
+ bias-disable;
+ low-power-disable;
+ };
+
+ conf-bootstrap {
+ pins = "MIO44", "MIO49";
+ bias-disable;
+ output-enable;
+ low-power-disable;
+ };
+
+ conf-tx {
+ pins = "MIO38", "MIO39", "MIO40",
+ "MIO41", "MIO42", "MIO43";
+ bias-disable;
+ output-enable;
+ low-power-enable;
+ };
+
+ conf-mdio {
+ groups = "mdio1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ output-enable;
+ };
+
+ mux-mdio {
+ function = "mdio1";
+ groups = "mdio1_0_grp";
+ };
+
+ mux {
+ function = "ethernet1";
+ groups = "ethernet1_0_grp";
+ };
+ };
+
+ pinctrl_usb0_default: usb0-default {
+ conf {
+ groups = "usb0_0_grp";
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO52", "MIO53", "MIO55";
+ bias-high-impedance;
+ drive-strength = <12>;
+ slew-rate = <SLEW_RATE_FAST>;
+ };
+
+ conf-tx {
+ pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+ "MIO60", "MIO61", "MIO62", "MIO63";
+ bias-disable;
+ output-enable;
+ drive-strength = <4>;
+ slew-rate = <SLEW_RATE_SLOW>;
+ };
+
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+ };
+
+ pinctrl_usb1_default: usb1-default {
+ conf {
+ groups = "usb1_0_grp";
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO64", "MIO65", "MIO67";
+ bias-high-impedance;
+ drive-strength = <12>;
+ slew-rate = <SLEW_RATE_FAST>;
+ };
+
+ conf-tx {
+ pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+ "MIO72", "MIO73", "MIO74", "MIO75";
+ bias-disable;
+ output-enable;
+ drive-strength = <4>;
+ slew-rate = <SLEW_RATE_SLOW>;
+ };
+
+ mux {
+ groups = "usb1_0_grp";
+ function = "usb1";
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0_default>;
+ assigned-clock-rates = <100000000>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
/*
* dts file for KV260 revA Carrier Card
*
- * (C) Copyright 2020 - 2021, Xilinx, Inc.
+ * (C) Copyright 2020 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
*
* SD level shifter:
- * "A" – A01 board un-modified (NXP)
- * "Y" – A01 board modified with legacy interposer (Nexperia)
- * "Z" – A01 board modified with Diode interposer
+ * "A" - A01 board un-modified (NXP)
+ * "Y" - A01 board modified with legacy interposer (Nexperia)
+ * "Z" - A01 board modified with Diode interposer
*
* Michal Simek <michal.simek@amd.com>
*/
disable-wp;
xlnx,mio-bank = <1>;
assigned-clock-rates = <187498123>;
- bus-width = <8>;
+ bus-width = <4>;
};
&gem3 {
/*
* dts file for KV260 revA Carrier Card
*
- * (C) Copyright 2020 - 2021, Xilinx, Inc.
+ * (C) Copyright 2020 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
clk-phase-uhs-sdr25 = <120>, <60>;
clk-phase-uhs-ddr50 = <126>, <48>;
assigned-clock-rates = <187498123>;
- bus-width = <8>;
+ bus-width = <4>;
};
&gem3 {
status = "okay";
spi_flash: flash@0 { /* MT25QU512A */
compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */
- #address-cells = <1>;
- #size-cells = <1>;
reg = <0>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
label = "Secure OS Storage";
reg = <0x2280000 0x20000>; /* 128KB */
};
- partition@22A0000 {
+ partition@22a0000 {
label = "User";
- reg = <0x22A0000 0x1d60000>; /* 29.375 MB */
+ reg = <0x22a0000 0x1d60000>; /* 29.375 MB */
};
};
};
&qspi {
status = "okay";
- is-dual = <1>;
flash@0 {
compatible = "st,m25p80", "n25q256a", "jedec,spi-nor";
m25p,fast-read;
spi-max-frequency = <166000000>;
#address-cells = <1>;
#size-cells = <1>;
- is-dual = <1>;
partition@0 {
label = "qspi-boot-bin";
reg = <0x00000 0x60000>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP vp-x-a2785-00 RevA System Controller
+ *
+ * (C) Copyright 2021 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ model = "ZynqMP System Controller on vp-x-a2785-00 board RevA";
+ compatible = "xlnx,zynqmp-vp-x-a2785-00-revA",
+ "xlnx,zynqmp-vp-x-a2785-00", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem0;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci0;
+ serial0 = &uart0;
+ serial1 = &dcc;
+ spi0 = &qspi;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ nvmem0 = &eeprom;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0 0 0x80000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ j383 {
+ label = "j383";
+ gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
+ linux,code = <BTN_MISC>;
+ wakeup-source;
+ autorepeat;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ heartbeat-led { /* ds52 */
+ label = "heartbeat";
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ si5332_0: si5332_0 { /* ps_ref_clk - u142 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33333333>;
+ };
+
+ si5332_1: si5332_1 { /* clk0_sgmii - u142 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33333333>; /* FIXME */
+ };
+
+ si5332_2: si5332_2 { /* clk1_usb - u142 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+};
+
+&qspi { /* MIO 0-5 */
+ status = "okay";
+ flash@0 {
+ compatible = "m25p80", "jedec,spi-nor"; /* u285 - mt25qu512abb8e12 512Mib */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-tx-bus-width = <4>; /* maybe 4 here */
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>;
+ partition@0 { /* for testing purpose */
+ label = "qspi";
+ reg = <0 0x4000000>;
+ };
+ };
+};
+
+&sdhci1 { /* sd MIO 45-51 */
+ status = "okay";
+ no-1-8-v;
+ disable-wp;
+ xlnx,mio-bank = <1>;
+};
+
+&uart0 { /* uart0 MIO38-39 */
+ status = "okay";
+ bootph-all;
+};
+
+&gem0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "sgmii"; /* DTG generates this properly 1512 */
+ is-internal-pcspma;
+ /* phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>; */
+ /* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */
+ phy0: ethernet-phy@0 { /* u131 - M88e1512 */
+ reg = <0>;
+ };
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */
+ "QSPI_CS_B", "", "", "SYSCTLR_GPIO", "SYSCTLR_LED", /* 5 - 9 */
+ "SYSCTLR_PB", "PMC_ZU4_TRIGGER", "", "", "", /* 10 - 14 */
+ "", "", "", "", "", /* 15 - 19 */
+ "", "", "", "", "", /* 20 - 24 */
+ "", "", "", "", "", /* 25 - 29 */
+ "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */
+ "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */
+ "", "", "ETH_RESET_B", "", "", /* 40 - 44 */
+ "SD1_CD", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */
+ "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */
+ "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */
+ "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "", /* 60 - 64 */
+ "", "", "", "", "", /* 65 - 69 */
+ "", "", "", "", "", /* 70 - 74 */
+ "", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
+ "", "", /* 78 - 79 */
+ "", "", "", "", "", /* 80 - 84 */
+ "", "", "", "", "", /* 85 - 89 */
+ "", "", "", "", "", /* 90 - 94 */
+ "", "", "", "", "", /* 95 - 99 */
+ "", "", "", "", "", /* 100 - 104 */
+ "", "", "", "", "", /* 105 - 109 */
+ "", "", "", "", "", /* 110 - 114 */
+ "", "", "", "", "", /* 115 - 119 */
+ "", "", "", "", "", /* 120 - 124 */
+ "", "", "", "", "", /* 125 - 129 */
+ "", "", "", "", "", /* 130 - 134 */
+ "", "", "", "", "", /* 135 - 139 */
+ "", "", "", "", "", /* 140 - 144 */
+ "", "", "", "", "", /* 145 - 149 */
+ "", "", "", "", "", /* 150 - 154 */
+ "", "", "", "", "", /* 155 - 159 */
+ "", "", "", "", "", /* 160 - 164 */
+ "", "", "", "", "", /* 165 - 169 */
+ "", "", "", ""; /* 170 - 173 */
+};
+
+&i2c0 { /* MIO 34-35 - can't stay here */
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ scl-gpios = <&gpio 34 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 35 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ tca6416_u233: gpio@20 { /* u233 */ /* FIXME - address maybe wrong */
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller; /* interrupt not connected */
+ #gpio-cells = <2>;
+ gpio-line-names = "MAX6643_OT_B", "MAX6643_FANFAIL_B", "", "", /* 0 - 3 */
+ "", "", "", "MAX6643_FULL_SPEED", /* 4 - 7 */
+ "", "", "", "VCCINT_FAULT_B", /* 10 - 13 */
+ "VCCINT_VRHOT_B", "", "PMBUS_ALERT", "PMBUS1_INA226_ALERT"; /* 14 - 17 */
+ };
+
+ i2c-mux@74 { /* u33 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ /* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+ pmbus_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* On connector J325 */
+ reg_vccint: tps53681@60 { /* u266 - 0xc0 */
+ compatible = "ti,tps53681", "ti,tps53679";
+ reg = <0x60>;
+ };
+ reg_vcc1v1_lp4: tps544@d { /* u85 */
+ compatible = "ti,tps544b25";
+ reg = <0xd>;
+ };
+ reg_mgtyavcc: tps544@10 { /* u274 */
+ compatible = "ti,tps544b25";
+ reg = <0x10>;
+ };
+ reg_mgtyavtt: tps544@11 { /* u275 */
+ compatible = "ti,tps544b25";
+ reg = <0x11>;
+ };
+ reg_vccaux: tps544@12 { /* u276 */
+ compatible = "ti,tps544b25";
+ reg = <0x12>;
+ };
+ reg_vcc_cpm: tps544@14 { /* u272 */
+ compatible = "ti,tps544b25";
+ reg = <0x14>;
+ };
+ reg_util_3v3: tps544@1d { /* u278 */
+ compatible = "ti,tps544b25";
+ reg = <0x1d>;
+ };
+ };
+ pmbus1_ina226_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* FIXME check alerts coming to SC */
+ vcc_cpm: ina226@44 { /* u273 */
+ compatible = "ti,ina226";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+ };
+ i2c@2 { /* NC */ /* FIXME maybe remove */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ pcie_smbus: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ pcie2_smbus: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+ i2c@5 { /* NC */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+ user_si570: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+ /* 7 unused */
+ };
+};
+
+&i2c1 { /* i2c1 MIO 36-37 */
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 36 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 37 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ i2c-mux@74 { /* u35 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ /* reset-gpios = <&gpio SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */
+ dc_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* Use for storing information about SC board */
+ eeprom: eeprom@54 { /* u34 - m24128 16kB */
+ compatible = "st,24c128", "atmel,24c128";
+ reg = <0x54>; /* & 0x5c */
+ };
+ si570_ref_clk: clock-generator@5d { /* u32 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <33333333>;
+ clock-frequency = <33333333>;
+ clock-output-names = "ref_clk";
+ silabs,skip-recall;
+ };
+ };
+ i2c@1 { /* NC - FIXME */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c@2 { /* NC - FIXME */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c@3 { /* NC - FIXME */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ lpddr4_si570_clk2_i2c: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ lpddr4_clk2: clock-generator@60 { /* u3 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x60>;
+ temperature-stability = <50>;
+ factory-fout = <200000000>;
+ clock-frequency = <200000000>;
+ clock-output-names = "lpddr4_clk2";
+ };
+ };
+ lpddr4_si570_clk1_i2c: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ lpddr4_clk1: clock-generator@60 { /* u248 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x60>;
+ temperature-stability = <50>;
+ factory-fout = <200000000>;
+ clock-frequency = <200000000>;
+ clock-output-names = "lpddr4_clk1";
+ };
+ };
+ /* 6-7 unused */
+ };
+};
+
+&usb0 { /* MIO52 - MIO63 */
+ status = "okay";
+ phy-names = "usb3-phy";
+ phys = <&psgtr 1 PHY_TYPE_USB3 0 1>;
+};
+
+&psgtr {
+ status = "okay";
+ /* sgmii, usb3 */
+ clocks = <&si5332_1>, <&si5332_2>;
+ clock-names = "ref0", "ref1";
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "peripheral";
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ maximum-speed = "super-speed";
+};
+
+&xilinx_ams {
+ status = "okay";
+};
+
+&ams_ps {
+ status = "okay";
+};
+
+&ams_pl {
+ status = "okay";
+};
+
+&pinctrl0 {
+ status = "okay";
+ pinctrl_i2c0_default: i2c0-default {
+ mux {
+ groups = "i2c0_8_grp";
+ function = "i2c0";
+ };
+
+ conf {
+ groups = "i2c0_8_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c0_gpio: i2c0-gpio {
+ mux {
+ groups = "gpio0_34_grp", "gpio0_35_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_34_grp", "gpio0_35_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_default: i2c1-default {
+ mux {
+ groups = "i2c1_9_grp";
+ function = "i2c1";
+ };
+
+ conf {
+ groups = "i2c1_9_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ mux {
+ groups = "gpio0_36_grp", "gpio0_37_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_36_grp", "gpio0_37_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP VPK120 RevA System Controller
+ *
+ * (C) Copyright 2021 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ model = "ZynqMP System Controller on VPK120 board RevA";
+ compatible = "xlnx,zynqmp-vpk120-revA",
+ "xlnx,zynqmp-vpk120", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem0;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci0;
+ serial0 = &uart0;
+ serial1 = &dcc;
+ spi0 = &qspi;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ nvmem0 = &eeprom;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ sw16 {
+ label = "sw16";
+ gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
+ linux,code = <BTN_MISC>;
+ wakeup-source;
+ autorepeat;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ heartbeat-led { /* ds40 */
+ label = "heartbeat";
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ si5332_0: si5332_0 { /* ps_ref_clk */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33333333>;
+ };
+
+ si5332_1: si5332_1 { /* clk0_sgmii */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33333333>; /* FIXME */
+ };
+
+ si5332_2: si5332_2 { /* clk1_usb */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+};
+
+&qspi { /* MIO 0-5 */
+ status = "okay";
+ flash@0 {
+ compatible = "m25p80", "jedec,spi-nor"; /* mt25qu512abb8e12 512Mib */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>;
+ partition@0 { /* for testing purpose */
+ label = "qspi";
+ reg = <0 0x4000000>;
+ };
+ };
+};
+
+&sdhci0 { /* emmc MIO 13-23 - with some settings MTFC16GAPALBH 16GB */
+ status = "okay";
+ non-removable;
+ disable-wp;
+ bus-width = <8>;
+ xlnx,mio-bank = <0>;
+};
+
+&uart0 { /* uart0 MIO38-39 */
+ status = "okay";
+ bootph-all;
+};
+
+&gem0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "sgmii"; /* DTG generates this properly 1512 */
+ is-internal-pcspma;
+ /* phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>; */
+ /* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */
+ "QSPI_CS_B", "", "", "SYSCTLR_GPIO", "SYSCTLR_LED", /* 5 - 9 */
+ "SYSCTLR_PB", "PMC_ZU4_TRIGGER", "", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
+ "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
+ "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */
+ "", "", "", "", "", /* 25 - 29 */
+ "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */
+ "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */
+ "", "", "ETH_RESET_B", "", "", /* 40 - 44 */
+ "", "", "", "", "", /* 45 - 49 */
+ "", "", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */
+ "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */
+ "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "", /* 60 - 64 */
+ "", "", "", "", "", /* 65 - 69 */
+ "", "", "", "", "", /* 70 - 74 */
+ "", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
+ "SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */
+ "SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "", "", /* 80 - 84 */
+ "SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "", /* 85 - 89 */
+ "SYSCTLR_GPIO0", "SYSCTLR_GPIO1", "SYSCTLR_GPIO2", "SYSCTLR_GPIO3", "SYSCTLR_GPIO4", /* 90 - 94 */
+ "SYSCTLR_GPIO5", "", "", "", "", /* 95 - 99 */
+ "", "", "", "", "", /* 100 - 104 */
+ "", "", "", "", "", /* 105 - 109 */
+ "", "", "", "", "", /* 110 - 114 */
+ "", "", "", "", "", /* 115 - 119 */
+ "", "", "", "", "", /* 120 - 124 */
+ "", "", "", "", "", /* 125 - 129 */
+ "", "", "", "", "", /* 130 - 134 */
+ "", "", "", "", "", /* 135 - 139 */
+ "", "", "", "", "", /* 140 - 144 */
+ "", "", "", "", "", /* 145 - 149 */
+ "", "", "", "", "", /* 150 - 154 */
+ "", "", "", "", "", /* 155 - 159 */
+ "", "", "", "", "", /* 160 - 164 */
+ "", "", "", "", "", /* 165 - 169 */
+ "", "", "", ""; /* 170 - 173 */
+};
+
+&i2c0 { /* MIO 34-35 - can't stay here */
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ scl-gpios = <&gpio 34 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 35 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ tca6416_u233: gpio@20 { /* u233 */ /* FIXME - address maybe wrong */
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller; /* interrupt not connected */
+ #gpio-cells = <2>;
+ gpio-line-names = "MAX6643_OT_B", "MAX6643_FANFAIL_B", "QSFPDD1_MODSELL", "QSFPDD1_MODSELL", /* 0 - 3 */
+ "PMBUS2_INA226_ALERT", "", "", "MAX6643_FULL_SPEED", /* 4 - 7 */
+ "FMCP1_FMC_PRSNT_M2C_B", "", "FMCP1_FMCP_PRSNT_M2C_B", "", /* 10 - 13 */
+ "VCCINT_VRHOT_B", "8A34001_EXP_RST_B", "PMBUS_ALERT", "PMBUS1_INA226_ALERT"; /* 14 - 17 */
+ };
+
+ i2c-mux@74 { /* u33 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ /* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+ pmbus_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* On connector J325 */
+ ir38060_41: regulator@41 { /* IR38060 - u259 */
+ compatible = "infineon,ir38060", "infineon,ir38064";
+ reg = <0x41>; /* i2c addr 0x11 */
+ };
+ ir38164_43: regulator@43 { /* IR38164 - u13 */
+ compatible = "infineon,ir38164";
+ reg = <0x43>; /* i2c addr 0x13 */
+ };
+ ir35221_45: pmic@46 { /* IR35221 - u152 */
+ compatible = "infineon,ir35221";
+ reg = <0x46>; /* PMBUS - 0x16 */
+ };
+ irps5401_47: pmic5401@47 { /* IRPS5401 - u160 */
+ compatible = "infineon,irps5401";
+ reg = <0x47>; /* i2c addr 0x17 */
+ };
+ ir38164_49: regulator@49 { /* IR38164 - u189 */
+ compatible = "infineon,ir38164";
+ reg = <0x49>; /* i2c addr 0x19 */
+ };
+ irps5401_4c: pmic@4c { /* IRPS5401 - u167 */
+ compatible = "infineon,irps5401";
+ reg = <0x4c>; /* i2c addr 0x1c */
+ };
+ irps5401_4d: pmic@4d { /* IRPS5401 - u175 */
+ compatible = "infineon,irps5401";
+ reg = <0x4d>; /* i2c addr 0x1c */
+ };
+ ir38164_4e: regulator@4e { /* IR38164 - u184 */
+ compatible = "infineon,ir38164";
+ reg = <0x4e>; /* i2c addr 0x1e */
+ };
+ ir38164_4f: regulator@4f { /* IR38164 - u187 */
+ compatible = "infineon,ir38164";
+ reg = <0x4f>; /* i2c addr 0x1f */
+ };
+ };
+ pmbus1_ina226_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* FIXME check alerts coming to SC */
+ vccint: ina226@40 { /* u65 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <5000>;
+ };
+ vcc_soc: ina226@41 { /* u161 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+ vcc_pmc: ina226@42 { /* u163 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>;
+ };
+ vcc_ram: ina226@43 { /* u5 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>;
+ };
+ vcc_pslp: ina226@44 { /* u165 */
+ compatible = "ti,ina226";
+ reg = <0x44>;
+ shunt-resistor = <5000>;
+ };
+ vcc_psfp: ina226@45 { /* u164 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>;
+ };
+ };
+ i2c@2 { /* NC */ /* FIXME maybe remove */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ pmbus2_ina226_i2c: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* FIXME check alerts coming to SC */
+ vccaux: ina226@40 { /* u166 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <5000>;
+ };
+ vccaux_pmc: ina226@41 { /* u168 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+ mgtavcc: ina226@42 { /* u265 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>;
+ };
+ vcc1v5: ina226@43 { /* u264 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>;
+ };
+ vcco_mio: ina226@45 { /* u172 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>;
+ };
+ mgtavtt: ina226@46 { /* u188 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <2000>;
+ };
+ vcco_502: ina226@47 { /* u174 */
+ compatible = "ti,ina226";
+ reg = <0x47>;
+ shunt-resistor = <5000>;
+ };
+ mgtvccaux: ina226@48 { /* u176 */
+ compatible = "ti,ina226";
+ reg = <0x48>;
+ shunt-resistor = <5000>;
+ };
+ vcc1v1_lp4: ina226@49 { /* u186 */
+ compatible = "ti,ina226";
+ reg = <0x49>;
+ shunt-resistor = <2000>;
+ };
+ vadj_fmc: ina226@4a { /* u184 */
+ compatible = "ti,ina226";
+ reg = <0x4a>;
+ shunt-resistor = <2000>;
+ };
+ lpdmgtyavcc: ina226@4b { /* u177 */
+ compatible = "ti,ina226";
+ reg = <0x4b>;
+ shunt-resistor = <5000>;
+ };
+ lpdmgtyavtt: ina226@4c { /* u260 */
+ compatible = "ti,ina226";
+ reg = <0x4c>;
+ shunt-resistor = <2000>;
+ };
+ lpdmgtyvccaux: ina226@4d { /* u234 */
+ compatible = "ti,ina226";
+ reg = <0x4d>;
+ shunt-resistor = <5000>;
+ };
+ };
+ i2c@4 { /* NC */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+ i2c@5 { /* NC */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+ user_si570: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ user_si570_1: clock-generator@5f { /* USER C0 SI570 - u205 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5f>;
+ temperature-stability = <50>;
+ factory-fout = <100000000>;
+ clock-frequency = <100000000>;
+ clock-output-names = "fmc_si570";
+ };
+
+ };
+ /* 7 unused */
+ };
+};
+
+&i2c1 { /* i2c1 MIO 36-37 */
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 36 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 37 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ i2c-mux@74 { /* u35 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ /* reset-gpios = <&gpio SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */
+ ref_clk_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* Use for storing information about SC board */
+ eeprom: eeprom@54 { /* u34 - m24128 16kB */
+ compatible = "st,24c128", "atmel,24c128";
+ reg = <0x54>; /* & 0x5c */
+ };
+ ref_clk: clock-generator@5d { /* u32 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <33333333>;
+ clock-frequency = <33333333>;
+ clock-output-names = "ref_clk";
+ silabs,skip-recall;
+ };
+ };
+ fmcp1_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* FIXME connection to Samtec J51C */
+ /* expected eeprom 0x50 SE cards */
+ };
+ i2c@2 { /* NC - FIXME */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ lpddr4_si570_clk3_i2c: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ lpddr4_clk3: clock-generator@60 { /* u4 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x60>;
+ temperature-stability = <50>;
+ factory-fout = <200000000>;
+ clock-frequency = <200000000>;
+ clock-output-names = "lpddr4_clk3";
+ };
+ };
+ lpddr4_si570_clk2_i2c: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ lpddr4_clk2: clock-generator@60 { /* u3 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x60>;
+ temperature-stability = <50>;
+ factory-fout = <200000000>;
+ clock-frequency = <200000000>;
+ clock-output-names = "lpddr4_clk2";
+ };
+ };
+ lpddr4_si570_clk1_i2c: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ lpddr4_clk1: clock-generator@60 { /* u248 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x60>;
+ temperature-stability = <50>;
+ factory-fout = <200000000>;
+ clock-frequency = <200000000>;
+ clock-output-names = "lpddr4_clk1";
+ };
+ };
+ qsfpdd_i2c: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* J1/J2 connectors */
+ };
+ idt8a34001_i2c: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /* Via J310 connector */
+ idt_8a34001: phc@5b {
+ compatible = "idt,8a34001"; /* u219B */
+ reg = <0x5b>; /* FIXME not in schematics */
+ };
+ };
+ };
+};
+
+&usb0 { /* MIO52 - MIO63 */
+ status = "okay";
+ phy-names = "usb3-phy";
+ phys = <&psgtr 1 PHY_TYPE_USB3 0 1>;
+};
+
+&psgtr {
+ status = "okay";
+ /* sgmii, usb3 */
+ clocks = <&si5332_1>, <&si5332_2>;
+ clock-names = "ref0", "ref1";
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "peripheral";
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ maximum-speed = "super-speed";
+};
+
+&xilinx_ams {
+ status = "okay";
+};
+
+&ams_ps {
+ status = "okay";
+};
+
+&ams_pl {
+ status = "okay";
+};
+
+&pinctrl0 {
+ status = "okay";
+ pinctrl_i2c0_default: i2c0-default {
+ mux {
+ groups = "i2c0_8_grp";
+ function = "i2c0";
+ };
+
+ conf {
+ groups = "i2c0_8_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c0_gpio: i2c0-gpio {
+ mux {
+ groups = "gpio0_34_grp", "gpio0_35_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_34_grp", "gpio0_35_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_default: i2c1-default {
+ mux {
+ groups = "i2c1_9_grp";
+ function = "i2c1";
+ };
+
+ conf {
+ groups = "i2c1_9_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ mux {
+ groups = "gpio0_36_grp", "gpio0_37_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_36_grp", "gpio0_37_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+};
/*
* dts file for Xilinx ZynqMP ZC1254
*
- * (C) Copyright 2015 - 2020, Xilinx, Inc.
+ * (C) Copyright 2015 - 2021, Xilinx, Inc.
*
* Michal Simek <michal.simek@amd.com>
- * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
*/
/dts-v1/;
/*
* dts file for Xilinx ZynqMP zc1751-xm015-dc1
*
- * (C) Copyright 2015 - 2021, Xilinx, Inc.
+ * (C) Copyright 2015 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gem3_default>;
- phy0: ethernet-phy@0 {
- reg = <0>;
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
};
&qspi {
status = "okay";
+ num-cs = <2>;
flash@0 {
compatible = "m25p80", "jedec,spi-nor"; /* Micron MT25QU512ABB8ESF */
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x0>;
+ reg = <0>, <1>;
+ parallel-memories = /bits/ 64 <0x4000000 0x4000000>; /* 64MB */
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
spi-max-frequency = <108000000>; /* Based on DC1 spec */
/*
* dts file for Xilinx ZynqMP zc1751-xm016-dc2
*
- * (C) Copyright 2015 - 2021, Xilinx, Inc.
+ * (C) Copyright 2015 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gem2_default>;
- phy0: ethernet-phy@5 {
- reg = <5>;
- ti,rx-internal-delay = <0x8>;
- ti,tx-internal-delay = <0xa>;
- ti,fifo-depth = <0x1>;
- ti,dp83867-rxctrl-strap-quirk;
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@5 {
+ reg = <5>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ ti,dp83867-rxctrl-strap-quirk;
+ };
};
};
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- phy0: ethernet-phy@0 { /* VSC8211 */
- reg = <0>;
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 { /* VSC8211 */
+ reg = <0>;
+ };
};
};
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <ðernet_phy0>;
- ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
- reg = <0>;
- };
- ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
- reg = <7>;
- };
- ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
- reg = <3>;
- };
- ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
- reg = <8>;
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
+ reg = <0>;
+ };
+ ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
+ reg = <7>;
+ };
+ ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
+ reg = <3>;
+ };
+ ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
+ reg = <8>;
+ };
};
};
*
* (C) Copyright 2015 - 2021, Xilinx, Inc.
*
- * Siva Durga Prasad <siva.durga.prasad.paladugu@amd.com>>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
* Michal Simek <michal.simek@amd.com>
*/
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gem1_default>;
- phy0: ethernet-phy@0 {
- reg = <0>;
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
};
/*
* dts file for Xilinx ZynqMP ZCU100 revC
*
- * (C) Copyright 2016 - 2021, Xilinx, Inc.
+ * (C) Copyright 2016 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
*
* Michal Simek <michal.simek@amd.com>
* Nathalie Chan King Choy
io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
};
- si5335_0: si5335_0 { /* clk0_usb - u23 */
+ si5335_0: si5335-0 { /* clk0_usb - u23 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
};
- si5335_1: si5335_1 { /* clk1_dp - u23 */
+ si5335_1: si5335-1 { /* clk1_dp - u23 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
/*
* dts file for Xilinx ZynqMP ZCU102 Rev1.0
*
- * (C) Copyright 2016 - 2020, Xilinx, Inc.
+ * (C) Copyright 2016 - 2018, Xilinx, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
/*
* dts file for Xilinx ZynqMP ZCU102 RevA
*
- * (C) Copyright 2015 - 2021, Xilinx, Inc.
+ * (C) Copyright 2015 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
&qspi {
status = "okay";
- is-dual = <1>;
+ num-cs = <2>;
flash@0 {
compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x0>;
+ reg = <0>, <1>;
+ parallel-memories = /bits/ 64 <0x4000000 0x4000000>; /* 64MB */
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
spi-max-frequency = <108000000>; /* Based on DC1 spec */
/*
* dts file for Xilinx ZynqMP ZCU102 RevB
*
- * (C) Copyright 2016 - 2020, Xilinx, Inc.
+ * (C) Copyright 2016 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
/*
* dts file for Xilinx ZynqMP ZCU104
*
- * (C) Copyright 2017 - 2021, Xilinx, Inc.
+ * (C) Copyright 2017 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
-// SPDX-License-Identifier: GPL-2.0+
+// SPDX-License-Identifier: GPL-2.0
/*
* dts file for Xilinx ZynqMP ZCU104
*
- * (C) Copyright 2017 - 2021, Xilinx, Inc.
+ * (C) Copyright 2017 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
/*
* dts file for Xilinx ZynqMP ZCU106
*
- * (C) Copyright 2016 - 2021, Xilinx, Inc.
+ * (C) Copyright 2016 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
#clock-cells = <0>;
clock-frequency = <114285000>;
};
+
+ dpcon {
+ compatible = "dp-connector";
+ label = "P11";
+ type = "full-size";
+
+ port {
+ dpcon_in: endpoint {
+ remote-endpoint = <&dpsub_dp_out>;
+ };
+ };
+ };
};
&can1 {
&qspi {
status = "okay";
- is-dual = <1>;
+ num-cs = <2>;
flash@0 {
compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x0>;
+ reg = <0>, <1>;
+ parallel-memories = /bits/ 64 <0x4000000 0x4000000>; /* 64MB */
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
spi-max-frequency = <108000000>; /* Based on DC1 spec */
phy-names = "dp-phy0", "dp-phy1";
phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
<&psgtr 0 PHY_TYPE_DP 1 3>;
+
+ ports {
+ port@5 {
+ dpsub_dp_out: endpoint {
+ remote-endpoint = <&dpcon_in>;
+ };
+ };
+ };
};
/*
* dts file for Xilinx ZynqMP ZCU111
*
- * (C) Copyright 2017 - 2021, Xilinx, Inc.
+ * (C) Copyright 2017 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
&qspi {
status = "okay";
- is-dual = <1>;
+ num-cs = <2>;
flash@0 {
compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x0>;
+ reg = <0>, <1>;
+ parallel-memories = /bits/ 64 <0x10000000 0x10000000>; /* 256MB */
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
spi-max-frequency = <108000000>; /* Based on DC1 spec */
* (C) Copyright 2017 - 2021, Xilinx, Inc.
*
* Michal Simek <michal.simek@amd.com>
- * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
*/
/dts-v1/;
* (C) Copyright 2018 - 2021, Xilinx, Inc.
*
* Michal Simek <michal.simek@amd.com>
- * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
*/
/dts-v1/;
* (C) Copyright 2018 - 2021, Xilinx, Inc.
*
* Michal Simek <michal.simek@amd.com>
- * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
*/
/dts-v1/;
leds {
compatible = "gpio-leds";
- heartbeat_led {
+ heartbeat-led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
&qspi {
status = "okay";
- is-dual = <1>;
+ num-cs = <2>;
flash@0 {
compatible = "m25p80", "jedec,spi-nor"; /* U11 and U12 MT25QU02GCBBE12 1Gb */
#address-cells = <1>;
#size-cells = <1>;
- reg = <0>;
+ reg = <0>, <1>;
+ parallel-memories = /bits/ 64 <0x10000000 0x10000000>; /* 256MB */
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
spi-max-frequency = <108000000>; /* Based on DC1 spec */
leds {
compatible = "gpio-leds";
- heartbeat_led {
+ heartbeat-led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
&qspi {
status = "okay";
- is-dual = <1>;
+ num-cs = <2>;
flash@0 {
compatible = "m25p80", "jedec,spi-nor"; /* U11 and U12 MT25QU02GCBBE12 1Gb */
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x0>;
+ reg = <0>, <1>;
+ parallel-memories = /bits/ 64 <0x10000000 0x10000000>; /* 256MB */
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
spi-max-frequency = <108000000>; /* Based on DC1 spec */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP ZCU670 (67DR)
+ *
+ * (C) Copyright 2017 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ model = "ZynqMP ZCU670 RevA";
+ compatible = "xlnx,zynqmp-zcu670-revA", "xlnx,zynqmp-zcu670",
+ "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci1;
+ nvmem0 = &eeprom;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &dcc;
+ spi0 = &qspi;
+ usb0 = &usb0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0 0 0x80000000>, <0x8 0x0 0x0 0x80000000>;
+ /* Another 4GB connected to PL */
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ sw1 {
+ label = "sw1";
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ linux,code = <BTN_MISC>;
+ wakeup-source;
+ autorepeat;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ heartbeat-led {
+ label = "heartbeat"; /* DS1 */
+ gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ ina226-vccint {
+ compatible = "iio-hwmon";
+ io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>;
+ };
+ ina226-vccint-io-bram-ps {
+ compatible = "iio-hwmon";
+ io-channels = <&vccint_io_bram_ps 0>, <&vccint_io_bram_ps 1>, <&vccint_io_bram_ps 2>, <&vccint_io_bram_ps 3>;
+ };
+ ina226-vcc1v8 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcc1v8 0>, <&vcc1v8 1>, <&vcc1v8 2>, <&vcc1v8 3>;
+ };
+ ina226-vcc1v2 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcc1v2 0>, <&vcc1v2 1>, <&vcc1v2 2>, <&vcc1v2 3>;
+ };
+ ina226-vadj-fmc {
+ compatible = "iio-hwmon";
+ io-channels = <&vadj_fmc 0>, <&vadj_fmc 1>, <&vadj_fmc 2>, <&vadj_fmc 3>;
+ };
+ ina226-mgtavcc {
+ compatible = "iio-hwmon";
+ io-channels = <&mgtavcc 0>, <&mgtavcc 1>, <&mgtavcc 2>, <&mgtavcc 3>;
+ };
+ ina226-mgt1v2 {
+ compatible = "iio-hwmon";
+ io-channels = <&mgt1v2 0>, <&mgt1v2 1>, <&mgt1v2 2>, <&mgt1v2 3>;
+ };
+ ina226-mgt1v8 {
+ compatible = "iio-hwmon";
+ io-channels = <&mgt1v8 0>, <&mgt1v8 1>, <&mgt1v8 2>, <&mgt1v8 3>;
+ };
+ ina226-vccint-ams {
+ compatible = "iio-hwmon";
+ io-channels = <&vccint_ams 0>, <&vccint_ams 1>, <&vccint_ams 2>, <&vccint_ams 3>;
+ };
+ ina226-dac-avtt {
+ compatible = "iio-hwmon";
+ io-channels = <&dac_avtt 0>, <&dac_avtt 1>, <&dac_avtt 2>, <&dac_avtt 3>;
+ };
+ ina226-dac-avccaux {
+ compatible = "iio-hwmon";
+ io-channels = <&dac_avccaux 0>, <&dac_avccaux 1>, <&dac_avccaux 2>, <&dac_avccaux 3>;
+ };
+ ina226-adc-avcc {
+ compatible = "iio-hwmon";
+ io-channels = <&adc_avcc 0>, <&adc_avcc 1>, <&adc_avcc 2>, <&adc_avcc 3>;
+ };
+ ina226-adc-avccaux {
+ compatible = "iio-hwmon";
+ io-channels = <&adc_avccaux 0>, <&adc_avccaux 1>, <&adc_avccaux 2>, <&adc_avccaux 3>;
+ };
+ ina226-dac-avcc {
+ compatible = "iio-hwmon";
+ io-channels = <&dac_avcc 0>, <&dac_avcc 1>, <&dac_avcc 2>, <&dac_avcc 3>;
+ };
+
+ /* 48MHz reference crystal */
+ ref48: ref48M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ si5381_6: si5381_6 { /* refclk_usb3 - u43 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+};
+
+&dcc {
+ status = "okay";
+};
+
+&fpd_dma_chan1 {
+ status = "okay";
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+};
+
+&gem3 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@c {
+ #phy-cells = <1>;
+ compatible = "ethernet-phy-id2000.a231";
+ reg = <0xc>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ ti,dp83867-rxctrl-strap-quirk;
+ reset-gpios = <&tca6416_u15 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names = "QSPI_LWR_CLK", "QSPI_LWR_DQ1", "QSPI_LWR_DQ2", "QSPI_LWR_DQ3", "QSPI_LWR_DQ0", /* 0 - 4 */
+ "QSPI_LWR_CS_B", "", "QSPI_UPR_CS_B", "QSPI_UPR_DQ0", "QSPI_UPR_DQ1", /* 5 - 9 */
+ "QSPI_UPR_DQ2", "QSPI_UPR_DQ3", "QSPI_UPR_CLK", "PS_GPIO2", "I2C0_SCL", /* 10 - 14 */
+ "I2C0_SDA", "I2C1_SCL", "I2C1_SDA", "UART0_TXD", "UART0_RXD", /* 15 - 19 */
+ "", "", "BUTTON", "LED", "", /* 20 - 24 */
+ "", "PMU_INPUT", "SFP3_TX_DISABLE", "SFP2_TX_DISABLE", "SFP1_TX_DISABLE", /* 25 - 29 */
+ "SFP0_TX_DISABLE", "", "PMU_GPO0", "PMU_GPO1", "PMU_GPO2", /* 30 - 34 */
+ "PMU_GPO3", "PMU_GPO4", "PMU_GPO5", "PS_GPIO1", "SDIO_SEL", /* 35 - 39 */
+ "SDIO_DIR_CMD", "SDIO_DIR_DAT0", "SDIO_DIR_DAT1", "SD_PWR_RST", "", /* 40 - 44 */
+ "SDIO_DETECT", "SDIO_DAT0", "SDIO_DAT1", "SDIO_DAT2", "SDIO_DAT3", /* 45 - 49 */
+ "SDIO_CMD", "SDIO_CLK", "USB_CLK", "USB_DIR", "USB_DATA2", /* 50 - 54 */
+ "USB_NXT", "USB_DATA0", "USB_DATA1", "USB_STP", "USB_DATA3", /* 55 - 59 */
+ "USB_DATA4", "USB_DATA5", "USB_DATA6", "USB_DATA7", "ENET_TX_CLK", /* 60 - 64 */
+ "ENET_TX_D0", "ENET_TX_D1", "ENET_TX_D2", "ENET_TX_D3", "ENET_TX_CTRL", /* 65 - 69 */
+ "ENET_RX_CLK", "ENET_RX_D0", "ENET_RX_D1", "ENET_RX_D2", "ENET_RX_D3", /* 70 - 74 */
+ "ENET_RX_CTRL", "ENET_MDC", "ENET_MDIO", /* 75 - 77, MIO end and EMIO start */
+ "", "", /* 78 - 79 */
+ "", "", "", "", "", /* 80 - 84 */
+ "", "", "", "", "", /* 85 - 89 */
+ "", "", "", "", "", /* 90 - 94 */
+ "", "", "", "", "", /* 95 - 99 */
+ "", "", "", "", "", /* 100 - 104 */
+ "", "", "", "", "", /* 105 - 109 */
+ "", "", "", "", "", /* 110 - 114 */
+ "", "", "", "", "", /* 115 - 119 */
+ "", "", "", "", "", /* 120 - 124 */
+ "", "", "", "", "", /* 125 - 129 */
+ "", "", "", "", "", /* 130 - 134 */
+ "", "", "", "", "", /* 135 - 139 */
+ "", "", "", "", "", /* 140 - 144 */
+ "", "", "", "", "", /* 145 - 149 */
+ "", "", "", "", "", /* 150 - 154 */
+ "", "", "", "", "", /* 155 - 159 */
+ "", "", "", "", "", /* 160 - 164 */
+ "", "", "", "", "", /* 165 - 169 */
+ "", "", "", ""; /* 170 - 173 */
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ tca6416_u15: gpio@20 { /* u15 */
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller; /* interrupt not connected */
+ #gpio-cells = <2>;
+ gpio-line-names = "MAX6643_OT_B", "MAX6643_FANFAIL_B", "MIO26_PMU_INPUT_LS", "DAC_AVTT_VOUT_SEL", /* 0 - 3 */
+ "SI5381_INT_ALM", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", "MAX6643_FULL_SPEED", /* 4 - 7 */
+ "FMCP_HSPC_PRSNT_M2C_B", "", "", "VCCINT_VRHOT_B", /* 10 - 13 */
+ "", "8A34001_EXP_RST_B", "IRPS5401_ALERT_B", "INA226_PMBUS_ALERT"; /* 14 - 17 */
+ };
+
+ i2c-mux@75 { /* u17 */
+ compatible = "nxp,pca9544";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* PS_PMBUS */
+ /* PMBUS_ALERT done via pca9544 */
+ vccint: ina226@40 { /* u65 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vccint";
+ reg = <0x40>;
+ shunt-resistor = <5000>;
+ };
+ vccint_io_bram_ps: ina226@41 { /* u57 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vccint-io-bram-ps";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+ vcc1v8: ina226@42 { /* u60 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcc1v8";
+ reg = <0x42>;
+ shunt-resistor = <2000>;
+ };
+ vcc1v2: ina226@43 { /* u58 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcc1v2";
+ reg = <0x43>;
+ shunt-resistor = <5000>;
+ };
+ vadj_fmc: ina226@45 { /* u62 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vadj-fmc";
+ reg = <0x45>;
+ shunt-resistor = <5000>;
+ };
+ mgtavcc: ina226@46 { /* u67 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-mgtavcc";
+ reg = <0x46>;
+ shunt-resistor = <2000>;
+ };
+ mgt1v2: ina226@47 { /* u63 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-mgt1v2";
+ reg = <0x47>;
+ shunt-resistor = <5000>; /* Not in schematics */
+ };
+ mgt1v8: ina226@48 { /* u64 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-mgt1v8";
+ reg = <0x48>;
+ shunt-resistor = <5000>;
+ };
+ vccint_ams: ina226@49 { /* u61 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vccint-ams";
+ reg = <0x49>;
+ shunt-resistor = <5000>;
+ };
+ dac_avtt: ina226@4a { /* u59 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-dac-avtt";
+ reg = <0x4a>;
+ shunt-resistor = <5000>;
+ };
+ dac_avccaux: ina226@4b { /* u124 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-dac-avccaux";
+ reg = <0x4b>;
+ shunt-resistor = <5000>;
+ };
+ adc_avcc: ina226@4c { /* u75 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-adc-avcc";
+ reg = <0x4c>;
+ shunt-resistor = <5000>;
+ };
+ adc_avccaux: ina226@4d { /* u71 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-adc-avccaux";
+ reg = <0x4d>;
+ shunt-resistor = <5000>;
+ };
+ dac_avcc: ina226@4e { /* u77 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-dac-avcc";
+ reg = <0x4e>;
+ shunt-resistor = <5000>;
+ };
+ };
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* NC */
+ };
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* u104 - ir35215 0x10/0x40 */
+ /* u127 - ir38164 0x1b/0x4b */
+ /* u112 - ir38164 0x13/0x43 */
+ /* u123 - ir38164 0x1c/0x4c */
+
+ irps5401_44: irps5401@44 { /* IRPS5401 - u53 */
+ compatible = "infineon,irps5401";
+ reg = <0x44>; /* i2c addr 0x14 */
+ };
+ irps5401_45: irps5401@45 { /* IRPS5401 - u55 */
+ compatible = "infineon,irps5401";
+ reg = <0x45>; /* i2c addr 0x15 */
+ };
+ /* J21 header too */
+
+ };
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* SYSMON */
+ };
+ };
+ /* u38 MPS430 */
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ i2c-mux@74 {
+ compatible = "nxp,pca9548"; /* u20 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ /* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+ i2c_eeprom: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /*
+ * IIC_EEPROM 1kB memory which uses 256B blocks
+ * where every block has different address.
+ * 0 - 256B address 0x54
+ * 256B - 512B address 0x55
+ * 512B - 768B address 0x56
+ * 768B - 1024B address 0x57
+ */
+ eeprom: eeprom@54 { /* u21 */
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+ };
+ i2c_si5381: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* SI5381 - u43 */
+ /* si5381: clock-generator@68 {
+ reg = <0x68>;
+ };*/
+ };
+ i2c_si570_user_c0: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ si570_1: clock-generator@5d { /* USER C0 SI570 - u47 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <300000000>;
+ clock-frequency = <300000000>;
+ clock-output-names = "si570_user_c0";
+ };
+ };
+ i2c_si570_mgt: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ si570_2: clock-generator@5d { /* USER MGT SI570 - u48 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <156250000>;
+ clock-frequency = <156250000>;
+ clock-output-names = "si570_mgt";
+ };
+ };
+ i2c_8a34001: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ /* U409B - 8a34001 */
+ };
+ i2c_clk104: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /* CLK104_SDA */
+ };
+ i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* RFMCP connector */
+ };
+ /* 7 NC */
+ };
+
+ i2c-mux@75 {
+ compatible = "nxp,pca9548"; /* u22 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ /* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* FMCP_HSPC_IIC */
+ };
+ i2c_si570_psrefclk: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ si570_3: clock-generator@5d { /* USER SI570 PSREFCLK - u130 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <33333333>;
+ clock-frequency = <33333333>;
+ clock-output-names = "si570_ps_ref_clk";
+ silabs,skip-recall;
+ };
+ };
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* SYSMON */
+ };
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* DDR4 SODIMM */
+ };
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ /* SFP3 */
+ };
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /* SFP2 */
+ };
+ i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* SFP1 */
+ };
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /* SFP0 */
+ };
+ };
+ /* u38 MPS430 */
+};
+
+&pinctrl0 {
+ status = "okay";
+ pinctrl_i2c0_default: i2c0-default {
+ mux {
+ groups = "i2c0_3_grp";
+ function = "i2c0";
+ };
+
+ conf {
+ groups = "i2c0_3_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c0_gpio: i2c0-gpio {
+ mux {
+ groups = "gpio0_14_grp", "gpio0_15_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_14_grp", "gpio0_15_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_default: i2c1-default {
+ mux {
+ groups = "i2c1_4_grp";
+ function = "i2c1";
+ };
+
+ conf {
+ groups = "i2c1_4_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ mux {
+ groups = "gpio0_16_grp", "gpio0_17_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_16_grp", "gpio0_17_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+};
+
+&qspi {
+ status = "okay";
+ num-cs = <2>;
+ flash@0 {
+ compatible = "m25p80", "jedec,spi-nor"; /* U11 and U12 MT25QU02GCBBE12 2Gb */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>, <1>;
+ parallel-memories = /bits/ 64 <0x10000000 0x10000000>; /* 256MB */
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+ spi-max-frequency = <108000000>; /* Based on DC1 spec */
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+ status = "okay";
+ disable-wp;
+ /*
+ * This property should be removed for supporting UHS mode
+ */
+ no-1-8-v;
+ xlnx,mio-bank = <1>;
+};
+
+&psgtr {
+ status = "okay";
+ /* hspc_dp4, hspc_dp5, usb3, hspc_dp6 */
+ clocks = <&si5381_6>;
+ clock-names = "ref2";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+ status = "okay";
+ phy-names = "usb3-phy";
+ phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "host";
+ snps,usb3_lpm_capable;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP ZCU670 (67DR) revB
+ *
+ * (C) Copyright 2017 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ model = "ZynqMP ZCU670 RevB";
+ compatible = "xlnx,zynqmp-zcu670-revB", "xlnx,zynqmp-zcu670",
+ "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci1;
+ nvmem0 = &eeprom;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &dcc;
+ spi0 = &qspi;
+ usb0 = &usb0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0 0 0x80000000>, <0x8 0x0 0x0 0x80000000>;
+ /* Another 4GB connected to PL */
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ sw1 {
+ label = "sw1";
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ linux,code = <BTN_MISC>;
+ wakeup-source;
+ autorepeat;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ heartbeat-led {
+ label = "heartbeat"; /* DS1 */
+ gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ ina226-vccint {
+ compatible = "iio-hwmon";
+ io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>;
+ };
+ ina226-vccint-io-bram-ps {
+ compatible = "iio-hwmon";
+ io-channels = <&vccint_io_bram_ps 0>, <&vccint_io_bram_ps 1>, <&vccint_io_bram_ps 2>, <&vccint_io_bram_ps 3>;
+ };
+ ina226-vcc1v8 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcc1v8 0>, <&vcc1v8 1>, <&vcc1v8 2>, <&vcc1v8 3>;
+ };
+ ina226-vcc1v2 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcc1v2 0>, <&vcc1v2 1>, <&vcc1v2 2>, <&vcc1v2 3>;
+ };
+ ina226-vadj-fmc {
+ compatible = "iio-hwmon";
+ io-channels = <&vadj_fmc 0>, <&vadj_fmc 1>, <&vadj_fmc 2>, <&vadj_fmc 3>;
+ };
+ ina226-mgtavcc {
+ compatible = "iio-hwmon";
+ io-channels = <&mgtavcc 0>, <&mgtavcc 1>, <&mgtavcc 2>, <&mgtavcc 3>;
+ };
+ ina226-mgt1v2 {
+ compatible = "iio-hwmon";
+ io-channels = <&mgt1v2 0>, <&mgt1v2 1>, <&mgt1v2 2>, <&mgt1v2 3>;
+ };
+ ina226-mgt1v8 {
+ compatible = "iio-hwmon";
+ io-channels = <&mgt1v8 0>, <&mgt1v8 1>, <&mgt1v8 2>, <&mgt1v8 3>;
+ };
+ ina226-vccint-ams {
+ compatible = "iio-hwmon";
+ io-channels = <&vccint_ams 0>, <&vccint_ams 1>, <&vccint_ams 2>, <&vccint_ams 3>;
+ };
+ ina226-dac-avtt {
+ compatible = "iio-hwmon";
+ io-channels = <&dac_avtt 0>, <&dac_avtt 1>, <&dac_avtt 2>, <&dac_avtt 3>;
+ };
+ ina226-dac-avccaux {
+ compatible = "iio-hwmon";
+ io-channels = <&dac_avccaux 0>, <&dac_avccaux 1>, <&dac_avccaux 2>, <&dac_avccaux 3>;
+ };
+ ina226-adc-avcc {
+ compatible = "iio-hwmon";
+ io-channels = <&adc_avcc 0>, <&adc_avcc 1>, <&adc_avcc 2>, <&adc_avcc 3>;
+ };
+ ina226-adc-avccaux {
+ compatible = "iio-hwmon";
+ io-channels = <&adc_avccaux 0>, <&adc_avccaux 1>, <&adc_avccaux 2>, <&adc_avccaux 3>;
+ };
+ ina226-dac-avcc {
+ compatible = "iio-hwmon";
+ io-channels = <&dac_avcc 0>, <&dac_avcc 1>, <&dac_avcc 2>, <&dac_avcc 3>;
+ };
+
+ /* 48MHz reference crystal */
+ ref48: ref48M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ si5381_6: si5381_6 { /* refclk_usb3 - u43 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+};
+
+&dcc {
+ status = "okay";
+};
+
+&fpd_dma_chan1 {
+ status = "okay";
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+};
+
+&gem3 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@c {
+ #phy-cells = <1>;
+ compatible = "ethernet-phy-id2000.a231";
+ reg = <0xc>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ ti,dp83867-rxctrl-strap-quirk;
+ reset-gpios = <&tca6416_u15 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names = "QSPI_LWR_CLK", "QSPI_LWR_DQ1", "QSPI_LWR_DQ2", "QSPI_LWR_DQ3", "QSPI_LWR_DQ0", /* 0 - 4 */
+ "QSPI_LWR_CS_B", "", "QSPI_UPR_CS_B", "QSPI_UPR_DQ0", "QSPI_UPR_DQ1", /* 5 - 9 */
+ "QSPI_UPR_DQ2", "QSPI_UPR_DQ3", "QSPI_UPR_CLK", "PS_GPIO2", "I2C0_SCL", /* 10 - 14 */
+ "I2C0_SDA", "I2C1_SCL", "I2C1_SDA", "UART0_TXD", "UART0_RXD", /* 15 - 19 */
+ "", "", "BUTTON", "LED", "", /* 20 - 24 */
+ "", "PMU_INPUT", "SFP3_TX_DISABLE", "SFP2_TX_DISABLE", "SFP1_TX_DISABLE", /* 25 - 29 */
+ "SFP0_TX_DISABLE", "", "PMU_GPO0", "PMU_GPO1", "PMU_GPO2", /* 30 - 34 */
+ "PMU_GPO3", "PMU_GPO4", "PMU_GPO5", "PS_GPIO1", "SDIO_SEL", /* 35 - 39 */
+ "SDIO_DIR_CMD", "SDIO_DIR_DAT0", "SDIO_DIR_DAT1", "SD_PWR_RST", "", /* 40 - 44 */
+ "SDIO_DETECT", "SDIO_DAT0", "SDIO_DAT1", "SDIO_DAT2", "SDIO_DAT3", /* 45 - 49 */
+ "SDIO_CMD", "SDIO_CLK", "USB_CLK", "USB_DIR", "USB_DATA2", /* 50 - 54 */
+ "USB_NXT", "USB_DATA0", "USB_DATA1", "USB_STP", "USB_DATA3", /* 55 - 59 */
+ "USB_DATA4", "USB_DATA5", "USB_DATA6", "USB_DATA7", "ENET_TX_CLK", /* 60 - 64 */
+ "ENET_TX_D0", "ENET_TX_D1", "ENET_TX_D2", "ENET_TX_D3", "ENET_TX_CTRL", /* 65 - 69 */
+ "ENET_RX_CLK", "ENET_RX_D0", "ENET_RX_D1", "ENET_RX_D2", "ENET_RX_D3", /* 70 - 74 */
+ "ENET_RX_CTRL", "ENET_MDC", "ENET_MDIO", /* 75 - 77, MIO end and EMIO start */
+ "", "", /* 78 - 79 */
+ "", "", "", "", "", /* 80 - 84 */
+ "", "", "", "", "", /* 85 - 89 */
+ "", "", "", "", "", /* 90 - 94 */
+ "", "", "", "", "", /* 95 - 99 */
+ "", "", "", "", "", /* 100 - 104 */
+ "", "", "", "", "", /* 105 - 109 */
+ "", "", "", "", "", /* 110 - 114 */
+ "", "", "", "", "", /* 115 - 119 */
+ "", "", "", "", "", /* 120 - 124 */
+ "", "", "", "", "", /* 125 - 129 */
+ "", "", "", "", "", /* 130 - 134 */
+ "", "", "", "", "", /* 135 - 139 */
+ "", "", "", "", "", /* 140 - 144 */
+ "", "", "", "", "", /* 145 - 149 */
+ "", "", "", "", "", /* 150 - 154 */
+ "", "", "", "", "", /* 155 - 159 */
+ "", "", "", "", "", /* 160 - 164 */
+ "", "", "", "", "", /* 165 - 169 */
+ "", "", "", ""; /* 170 - 173 */
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ tca6416_u15: gpio@20 { /* u15 */
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller; /* interrupt not connected */
+ #gpio-cells = <2>;
+ gpio-line-names = "MAX6643_OT_B", "MAX6643_FANFAIL_B", "MIO26_PMU_INPUT_LS", "DAC_AVTT_VOUT_SEL", /* 0 - 3 */
+ "SI5381_INT_ALM", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", "MAX6643_FULL_SPEED", /* 4 - 7 */
+ "FMCP_HSPC_PRSNT_M2C_B", "", "", "VCCINT_VRHOT_B", /* 10 - 13 */
+ "", "8A34001_EXP_RST_B", "IRPS5401_ALERT_B", "INA226_PMBUS_ALERT"; /* 14 - 17 */
+ };
+
+ i2c-mux@75 { /* u17 */
+ compatible = "nxp,pca9544";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* PS_PMBUS */
+ /* PMBUS_ALERT done via pca9544 */
+ vccint: ina226@40 { /* u65 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vccint";
+ reg = <0x40>;
+ shunt-resistor = <5000>;
+ };
+ vccint_io_bram_ps: ina226@41 { /* u57 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vccint-io-bram-ps";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+ vcc1v8: ina226@42 { /* u60 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcc1v8";
+ reg = <0x42>;
+ shunt-resistor = <2000>;
+ };
+ vcc1v2: ina226@43 { /* u58 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcc1v2";
+ reg = <0x43>;
+ shunt-resistor = <5000>;
+ };
+ vadj_fmc: ina226@45 { /* u62 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vadj-fmc";
+ reg = <0x45>;
+ shunt-resistor = <5000>;
+ };
+ mgtavcc: ina226@46 { /* u67 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-mgtavcc";
+ reg = <0x46>;
+ shunt-resistor = <2000>;
+ };
+ mgt1v2: ina226@47 { /* u63 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-mgt1v2";
+ reg = <0x47>;
+ shunt-resistor = <5000>; /* Not in schematics */
+ };
+ mgt1v8: ina226@48 { /* u64 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-mgt1v8";
+ reg = <0x48>;
+ shunt-resistor = <5000>;
+ };
+ vccint_ams: ina226@49 { /* u61 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vccint-ams";
+ reg = <0x49>;
+ shunt-resistor = <5000>;
+ };
+ dac_avtt: ina226@4a { /* u59 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-dac-avtt";
+ reg = <0x4a>;
+ shunt-resistor = <5000>;
+ };
+ dac_avccaux: ina226@4b { /* u124 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-dac-avccaux";
+ reg = <0x4b>;
+ shunt-resistor = <5000>;
+ };
+ adc_avcc: ina226@4c { /* u75 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-adc-avcc";
+ reg = <0x4c>;
+ shunt-resistor = <5000>;
+ };
+ adc_avccaux: ina226@4d { /* u71 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-adc-avccaux";
+ reg = <0x4d>;
+ shunt-resistor = <5000>;
+ };
+ dac_avcc: ina226@4e { /* u77 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-dac-avcc";
+ reg = <0x4e>;
+ shunt-resistor = <5000>;
+ };
+ };
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* NC */
+ };
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* u104 - ir35215 0x10/0x40 */
+ /* u127 - ir38164 0x1b/0x4b */
+ /* u112 - ir38164 0x13/0x43 */
+ /* u123 - ir38164 0x1c/0x4c */
+
+ irps5401_44: irps5401@44 { /* IRPS5401 - u53 */
+ compatible = "infineon,irps5401";
+ reg = <0x44>; /* i2c addr 0x14 */
+ };
+ irps5401_45: irps5401@45 { /* IRPS5401 - u55 */
+ compatible = "infineon,irps5401";
+ reg = <0x45>; /* i2c addr 0x15 */
+ };
+ /* J21 header too */
+
+ };
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* SYSMON */
+ };
+ };
+ /* u38 MPS430 */
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ i2c-mux@74 {
+ compatible = "nxp,pca9548"; /* u20 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ /* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+ i2c_eeprom: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /*
+ * IIC_EEPROM 1kB memory which uses 256B blocks
+ * where every block has different address.
+ * 0 - 256B address 0x54
+ * 256B - 512B address 0x55
+ * 512B - 768B address 0x56
+ * 768B - 1024B address 0x57
+ */
+ eeprom: eeprom@54 { /* u21 */
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+ };
+ i2c_si5381: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* SI5381 - u43 */
+ /* si5381: clock-generator@68 {
+ reg = <0x68>;
+ };*/
+ };
+ i2c_si570_user_c0: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ si570_1: clock-generator@5d { /* USER C0 SI570 - u47 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <300000000>;
+ clock-frequency = <300000000>;
+ clock-output-names = "si570_user_c0";
+ };
+ };
+ i2c_si570_mgt: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ si570_2: clock-generator@5d { /* USER MGT SI570 - u48 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <156250000>;
+ clock-frequency = <156250000>;
+ clock-output-names = "si570_mgt";
+ };
+ };
+ i2c_8a34001: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ /* U409B - 8a34001 */
+ };
+ i2c_clk104: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /* CLK104_SDA */
+ };
+ i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* RFMCP connector */
+ };
+ /* 7 NC */
+ };
+
+ i2c-mux@75 {
+ compatible = "nxp,pca9548"; /* u22 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ /* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* FMCP_HSPC_IIC */
+ };
+ i2c_si570_psrefclk: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ si570_3: clock-generator@5d { /* USER SI570 PSREFCLK - u130 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <33333333>;
+ clock-frequency = <33333333>;
+ clock-output-names = "si570_ps_ref_clk";
+ silabs,skip-recall;
+ };
+ };
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* SYSMON */
+ };
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* DDR4 SODIMM */
+ };
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ /* SFP3 */
+ };
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /* SFP2 */
+ };
+ i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* SFP1 */
+ };
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /* SFP0 */
+ };
+ };
+ /* u38 MPS430 */
+};
+
+&pinctrl0 {
+ status = "okay";
+ pinctrl_i2c0_default: i2c0-default {
+ mux {
+ groups = "i2c0_3_grp";
+ function = "i2c0";
+ };
+
+ conf {
+ groups = "i2c0_3_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c0_gpio: i2c0-gpio {
+ mux {
+ groups = "gpio0_14_grp", "gpio0_15_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_14_grp", "gpio0_15_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_default: i2c1-default {
+ mux {
+ groups = "i2c1_4_grp";
+ function = "i2c1";
+ };
+
+ conf {
+ groups = "i2c1_4_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ mux {
+ groups = "gpio0_16_grp", "gpio0_17_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_16_grp", "gpio0_17_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+};
+
+&qspi {
+ status = "okay";
+ num-cs = <2>;
+ flash@0 {
+ compatible = "m25p80", "jedec,spi-nor"; /* U11 and U12 MT25QU02GCBBE12 2Gb */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>, <1>;
+ parallel-memories = /bits/ 64 <0x10000000 0x10000000>; /* 256MB */
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+ spi-max-frequency = <108000000>; /* Based on DC1 spec */
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+ status = "okay";
+ disable-wp;
+ /*
+ * This property should be removed for supporting UHS mode
+ */
+ no-1-8-v;
+ xlnx,mio-bank = <1>;
+ clk-phase-sd-hs = <120>, <60>;
+ clk-phase-uhs-sdr25 = <132>, <60>;
+ clk-phase-uhs-ddr50 = <153>, <48>;
+};
+
+&psgtr {
+ status = "okay";
+ /* hspc_dp4, hspc_dp5, usb3, hspc_dp6 */
+ clocks = <&si5381_6>;
+ clock-names = "ref2";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+ status = "okay";
+ phy-names = "usb3-phy";
+ phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "host";
+ snps,usb3_lpm_capable;
+};
#include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/power/xlnx-zynqmp-power.h>
#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
};
};
- zynqmp_ipi: zynqmp_ipi {
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ rproc_0_fw_image: memory@3ed00000 {
+ no-map;
+ reg = <0x0 0x3ed00000 0x0 0x40000>;
+ };
+
+ rproc_1_fw_image: memory@3ef00000 {
+ no-map;
+ reg = <0x0 0x3ef00000 0x0 0x40000>;
+ };
+ };
+
+ zynqmp_ipi: zynqmp-ipi {
bootph-all;
compatible = "xlnx,zynqmp-ipi-mailbox";
interrupt-parent = <&gic>;
- interrupts = <0 35 4>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
xlnx,ipi-id = <0>;
#address-cells = <2>;
#size-cells = <2>;
pmu {
compatible = "arm,armv8-pmuv3";
interrupt-parent = <&gic>;
- interrupts = <0 143 4>,
- <0 144 4>,
- <0 145 4>,
- <0 146 4>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>,
<&cpu1>,
<&cpu2>,
bootph-all;
compatible = "xlnx,zynqmp-power";
interrupt-parent = <&gic>;
- interrupts = <0 35 4>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
mboxes = <&ipi_mailbox_pmu1 0>, <&ipi_mailbox_pmu1 1>;
mbox-names = "tx", "rx";
};
- nvmem_firmware {
+ nvmem-firmware {
compatible = "xlnx,zynqmp-nvmem-fw";
#address-cells = <1>;
#size-cells = <1>;
- soc_revision: soc_revision@0 {
+ soc_revision: soc-revision@0 {
reg = <0x0 0x4>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
- interrupts = <1 13 0xf08>,
- <1 14 0xf08>,
- <1 11 0xf08>,
- <1 10 0xf08>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
edac {
power-domains = <&zynqmp_firmware PD_PL>;
};
+ remoteproc {
+ compatible = "xlnx,zynqmp-r5fss";
+ xlnx,cluster-mode = <1>;
+
+ r5f-0 {
+ compatible = "xlnx,zynqmp-r5f";
+ power-domains = <&zynqmp_firmware PD_RPU_0>;
+ memory-region = <&rproc_0_fw_image>;
+ };
+
+ r5f-1 {
+ compatible = "xlnx,zynqmp-r5f";
+ power-domains = <&zynqmp_firmware PD_RPU_1>;
+ memory-region = <&rproc_1_fw_image>;
+ };
+ };
+
amba: axi {
compatible = "simple-bus";
bootph-all;
status = "disabled";
clock-names = "can_clk", "pclk";
reg = <0x0 0xff060000 0x0 0x1000>;
- interrupts = <0 23 4>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
status = "disabled";
clock-names = "can_clk", "pclk";
reg = <0x0 0xff070000 0x0 0x1000>;
- interrupts = <0 24 4>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
compatible = "arm,cci-400-pmu,r1";
reg = <0x9000 0x5000>;
interrupt-parent = <&gic>;
- interrupts = <0 123 4>,
- <0 123 4>,
- <0 123 4>,
- <0 123 4>,
- <0 123 4>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
};
};
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd500000 0x0 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 124 4>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd510000 0x0 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 125 4>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd520000 0x0 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 126 4>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd530000 0x0 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 127 4>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd540000 0x0 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 128 4>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd550000 0x0 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 129 4>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd560000 0x0 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 130 4>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd570000 0x0 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 131 4>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
<0x0 0xf9060000 0x0 0x20000>;
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
gpu: gpu@fd4b0000 {
compatible = "xlnx,zynqmp-mali", "arm,mali-400";
reg = <0x0 0xfd4b0000 0x0 0x10000>;
interrupt-parent = <&gic>;
- interrupts = <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", "ppmmu1";
clock-names = "bus", "core";
power-domains = <&zynqmp_firmware PD_GPU>;
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffa80000 0x0 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 77 4>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffa90000 0x0 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 78 4>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffaa0000 0x0 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 79 4>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffab0000 0x0 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 80 4>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffac0000 0x0 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 81 4>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffad0000 0x0 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 82 4>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffae0000 0x0 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 83 4>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffaf0000 0x0 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 84 4>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
compatible = "xlnx,zynqmp-ddrc-2.40a";
reg = <0x0 0xfd070000 0x0 0x30000>;
interrupt-parent = <&gic>;
- interrupts = <0 112 4>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
};
nand0: nand-controller@ff100000 {
reg = <0x0 0xff100000 0x0 0x1000>;
clock-names = "controller", "bus";
interrupt-parent = <&gic>;
- interrupts = <0 14 4>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
iommus = <&smmu 0x872>;
compatible = "xlnx,zynqmp-gem", "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 57 4>, <0 57 4>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff0b0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
- #address-cells = <1>;
- #size-cells = <0>;
iommus = <&smmu 0x874>;
power-domains = <&zynqmp_firmware PD_ETH_0>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>;
compatible = "xlnx,zynqmp-gem", "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 59 4>, <0 59 4>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff0c0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
- #address-cells = <1>;
- #size-cells = <0>;
iommus = <&smmu 0x875>;
power-domains = <&zynqmp_firmware PD_ETH_1>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
compatible = "xlnx,zynqmp-gem", "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 61 4>, <0 61 4>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff0d0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
- #address-cells = <1>;
- #size-cells = <0>;
iommus = <&smmu 0x876>;
power-domains = <&zynqmp_firmware PD_ETH_2>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>;
compatible = "xlnx,zynqmp-gem", "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 63 4>, <0 63 4>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff0e0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
- #address-cells = <1>;
- #size-cells = <0>;
iommus = <&smmu 0x877>;
power-domains = <&zynqmp_firmware PD_ETH_3>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>;
#gpio-cells = <0x2>;
gpio-controller;
interrupt-parent = <&gic>;
- interrupts = <0 16 4>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0xff0a0000 0x0 0x1000>;
compatible = "cdns,i2c-r1p14";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 17 4>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <400000>;
reg = <0x0 0xff020000 0x0 0x1000>;
#address-cells = <1>;
compatible = "cdns,i2c-r1p14";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 18 4>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <400000>;
reg = <0x0 0xff030000 0x0 0x1000>;
#address-cells = <1>;
msi-controller;
device_type = "pci";
interrupt-parent = <&gic>;
- interrupts = <0 118 4>,
- <0 117 4>,
- <0 116 4>,
- <0 115 4>, /* MSI_1 [63...32] */
- <0 114 4>; /* MSI_0 [31...0] */
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, /* MSI_1 [63...32] */
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; /* MSI_0 [31...0] */
interrupt-names = "misc", "dummy", "intx",
"msi1", "msi0";
msi-parent = <&pcie>;
compatible = "xlnx,zynqmp-qspi-1.0";
status = "disabled";
clock-names = "ref_clk", "pclk";
- interrupts = <0 15 4>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
num-cs = <1>;
reg = <0x0 0xff0f0000 0x0 0x1000>,
status = "disabled";
reg = <0x0 0xffa60000 0x0 0x100>;
interrupt-parent = <&gic>;
- interrupts = <0 26 4>, <0 27 4>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "alarm", "sec";
calibration = <0x7FFF>;
};
status = "disabled";
reg = <0x0 0xfd0c0000 0x0 0x2000>;
interrupt-parent = <&gic>;
- interrupts = <0 133 4>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&zynqmp_firmware PD_SATA>;
resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 48 4>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff160000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
iommus = <&smmu 0x870>;
compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 49 4>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff170000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
iommus = <&smmu 0x871>;
status = "disabled";
#global-interrupts = <1>;
interrupt-parent = <&gic>;
- interrupts = <0 155 4>,
- <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
- <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
- <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
- <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
};
spi0: spi@ff040000 {
compatible = "cdns,spi-r1p6";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 19 4>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff040000 0x0 0x1000>;
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
compatible = "cdns,spi-r1p6";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 20 4>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff050000 0x0 0x1000>;
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff110000 0x0 0x1000>;
timer-width = <32>;
power-domains = <&zynqmp_firmware PD_TTC_0>;
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff120000 0x0 0x1000>;
timer-width = <32>;
power-domains = <&zynqmp_firmware PD_TTC_1>;
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff130000 0x0 0x1000>;
timer-width = <32>;
power-domains = <&zynqmp_firmware PD_TTC_2>;
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff140000 0x0 0x1000>;
timer-width = <32>;
power-domains = <&zynqmp_firmware PD_TTC_3>;
compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 21 4>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff000000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
power-domains = <&zynqmp_firmware PD_UART_0>;
compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 22 4>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff010000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
power-domains = <&zynqmp_firmware PD_UART_1>;
reg = <0x0 0xfe200000 0x0 0x40000>;
interrupt-parent = <&gic>;
interrupt-names = "dwc_usb3", "otg", "hiber";
- interrupts = <0 65 4>, <0 69 4>, <0 75 4>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&smmu 0x860>;
snps,quirk-frame-length-adjustment = <0x20>;
clock-names = "ref";
reg = <0x0 0xfe300000 0x0 0x40000>;
interrupt-parent = <&gic>;
interrupt-names = "dwc_usb3", "otg", "hiber";
- interrupts = <0 70 4>, <0 74 4>, <0 76 4>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&smmu 0x861>;
snps,quirk-frame-length-adjustment = <0x20>;
clock-names = "ref";
compatible = "cdns,wdt-r1p2";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 113 1>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
reg = <0x0 0xfd4d0000 0x0 0x1000>;
timeout-sec = <60>;
reset-on-timeout;
compatible = "cdns,wdt-r1p2";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 52 1>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
reg = <0x0 0xff150000 0x0 0x1000>;
timeout-sec = <10>;
};
compatible = "xlnx,zynqmp-ams";
status = "disabled";
interrupt-parent = <&gic>;
- interrupts = <0 56 4>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xffa50000 0x0 0x800>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,zynqmp-dpdma";
status = "disabled";
reg = <0x0 0xfd4c0000 0x0 0x1000>;
- interrupts = <0 122 4>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clock-names = "axi_clk";
power-domains = <&zynqmp_firmware PD_DP>;
<0x0 0xfd4ab000 0x0 0x1000>,
<0x0 0xfd4ac000 0x0 0x1000>;
reg-names = "dp", "blend", "av_buf", "aud";
- interrupts = <0 119 4>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clock-names = "dp_apb_clk", "dp_aud_clk",
"dp_vtc_pixel_clk_in";
<&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>,
<&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>,
<&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+ port@1 {
+ reg = <1>;
+ };
+ port@2 {
+ reg = <2>;
+ };
+ port@3 {
+ reg = <3>;
+ };
+ port@4 {
+ reg = <4>;
+ };
+ port@5 {
+ reg = <5>;
+ };
+ };
};
};
};
#define EMMC_MODE 0x00000006
#define USB_MODE 0x00000007
#define OSPI_MODE 0x00000008
+#define SELECTMAP_MODE 0x0000000A
#define SD1_LSHFT_MODE 0x0000000E /* SD1 Level shifter */
#define JTAG_MODE 0x00000000
#define BOOT_MODE_USE_ALT 0x100
#define EMMC_MODE 0x00000006
#define USB_MODE 0x00000007
#define OSPI_MODE 0x00000008
+#define SELECTMAP_MODE 0x0000000A
#define SD1_LSHFT_MODE 0x0000000E /* SD1 Level shifter */
#define JTAG_MODE 0x00000000
#define BOOT_MODE_USE_ALT 0x100
// SPDX-License-Identifier: GPL-2.0
/*
* (C) Copyright 2019 Xilinx, Inc.
- * Siva Durga Prasad <siva.durga.prasad.paladugu@amd.com>>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
*/
#include <common.h>
mode = "mmc";
bootseq = dev_seq(dev);
break;
+ case SELECTMAP_MODE:
+ puts("SELECTMAP_MODE\n");
+ break;
case SD_MODE:
puts("SD_MODE\n");
if (uclass_get_device_by_name(UCLASS_MMC,
mode = "mmc";
bootseq = dev_seq(dev);
break;
+ case SELECTMAP_MODE:
+ puts("SELECTMAP_MODE\n");
+ break;
case SD_MODE:
puts("SD_MODE\n");
if (uclass_get_device_by_name(UCLASS_MMC,
return ENVL_SPI_FLASH;
return ENVL_NOWHERE;
case JTAG_MODE:
+ case SELECTMAP_MODE:
default:
return ENVL_NOWHERE;
}
return 1;
}
-static unsigned long psu_serdes_init_data(void)
-{
- psu_mask_write(0xFD410000, 0x0000001FU, 0x00000009U);
- psu_mask_write(0xFD410004, 0x0000001FU, 0x00000009U);
- psu_mask_write(0xFD410008, 0x0000001FU, 0x00000008U);
- psu_mask_write(0xFD402860, 0x00000080U, 0x00000080U);
- psu_mask_write(0xFD402864, 0x00000081U, 0x00000001U);
- psu_mask_write(0xFD402868, 0x00000082U, 0x00000002U);
- psu_mask_write(0xFD40A094, 0x00000010U, 0x00000010U);
- psu_mask_write(0xFD40A368, 0x000000FFU, 0x00000038U);
- psu_mask_write(0xFD40A36C, 0x00000007U, 0x00000003U);
- psu_mask_write(0xFD402368, 0x000000FFU, 0x00000058U);
- psu_mask_write(0xFD40236C, 0x00000007U, 0x00000003U);
- psu_mask_write(0xFD406368, 0x000000FFU, 0x00000058U);
- psu_mask_write(0xFD40636C, 0x00000007U, 0x00000003U);
- psu_mask_write(0xFD402370, 0x000000FFU, 0x0000007CU);
- psu_mask_write(0xFD402374, 0x000000FFU, 0x00000033U);
- psu_mask_write(0xFD402378, 0x000000FFU, 0x00000002U);
- psu_mask_write(0xFD40237C, 0x00000033U, 0x00000030U);
- psu_mask_write(0xFD406370, 0x000000FFU, 0x0000007CU);
- psu_mask_write(0xFD406374, 0x000000FFU, 0x00000033U);
- psu_mask_write(0xFD406378, 0x000000FFU, 0x00000002U);
- psu_mask_write(0xFD40637C, 0x00000033U, 0x00000030U);
- psu_mask_write(0xFD40A370, 0x000000FFU, 0x000000F4U);
- psu_mask_write(0xFD40A374, 0x000000FFU, 0x00000031U);
- psu_mask_write(0xFD40A378, 0x000000FFU, 0x00000002U);
- psu_mask_write(0xFD40A37C, 0x00000033U, 0x00000030U);
- psu_mask_write(0xFD40906C, 0x00000003U, 0x00000003U);
- psu_mask_write(0xFD4080F4, 0x00000003U, 0x00000003U);
- psu_mask_write(0xFD4090CC, 0x00000020U, 0x00000020U);
- psu_mask_write(0xFD401074, 0x00000010U, 0x00000010U);
- psu_mask_write(0xFD405074, 0x00000010U, 0x00000010U);
- psu_mask_write(0xFD409074, 0x00000010U, 0x00000010U);
- psu_mask_write(0xFD40D074, 0x00000010U, 0x00000010U);
- psu_mask_write(0xFD401994, 0x00000007U, 0x00000007U);
- psu_mask_write(0xFD405994, 0x00000007U, 0x00000007U);
- psu_mask_write(0xFD40989C, 0x00000080U, 0x00000080U);
- psu_mask_write(0xFD4098F8, 0x000000FFU, 0x0000001AU);
- psu_mask_write(0xFD4098FC, 0x000000FFU, 0x0000001AU);
- psu_mask_write(0xFD409990, 0x000000FFU, 0x00000010U);
- psu_mask_write(0xFD409924, 0x000000FFU, 0x000000FEU);
- psu_mask_write(0xFD409928, 0x000000FFU, 0x00000000U);
- psu_mask_write(0xFD409900, 0x000000FFU, 0x0000001AU);
- psu_mask_write(0xFD40992C, 0x000000FFU, 0x00000000U);
- psu_mask_write(0xFD409980, 0x000000FFU, 0x000000FFU);
- psu_mask_write(0xFD409914, 0x000000FFU, 0x000000F7U);
- psu_mask_write(0xFD409918, 0x00000001U, 0x00000001U);
- psu_mask_write(0xFD409940, 0x000000FFU, 0x000000F7U);
- psu_mask_write(0xFD409944, 0x00000001U, 0x00000001U);
- psu_mask_write(0xFD409994, 0x00000007U, 0x00000007U);
- psu_mask_write(0xFD40D994, 0x00000007U, 0x00000007U);
- psu_mask_write(0xFD40107C, 0x0000000FU, 0x00000001U);
- psu_mask_write(0xFD40507C, 0x0000000FU, 0x00000001U);
- psu_mask_write(0xFD40907C, 0x0000000FU, 0x00000001U);
- psu_mask_write(0xFD40D07C, 0x0000000FU, 0x00000001U);
- psu_mask_write(0xFD4019A4, 0x000000FFU, 0x000000FFU);
- psu_mask_write(0xFD401038, 0x00000040U, 0x00000040U);
- psu_mask_write(0xFD40102C, 0x00000040U, 0x00000040U);
- psu_mask_write(0xFD4059A4, 0x000000FFU, 0x000000FFU);
- psu_mask_write(0xFD405038, 0x00000040U, 0x00000040U);
- psu_mask_write(0xFD40502C, 0x00000040U, 0x00000040U);
- psu_mask_write(0xFD4099A4, 0x000000FFU, 0x000000FFU);
- psu_mask_write(0xFD409038, 0x00000040U, 0x00000040U);
- psu_mask_write(0xFD40902C, 0x00000040U, 0x00000040U);
- psu_mask_write(0xFD40D9A4, 0x000000FFU, 0x000000FFU);
- psu_mask_write(0xFD40D038, 0x00000040U, 0x00000040U);
- psu_mask_write(0xFD40D02C, 0x00000040U, 0x00000040U);
- psu_mask_write(0xFD4019AC, 0x00000003U, 0x00000000U);
- psu_mask_write(0xFD4059AC, 0x00000003U, 0x00000000U);
- psu_mask_write(0xFD4099AC, 0x00000003U, 0x00000000U);
- psu_mask_write(0xFD40D9AC, 0x00000003U, 0x00000000U);
- psu_mask_write(0xFD401978, 0x00000010U, 0x00000010U);
- psu_mask_write(0xFD405978, 0x00000010U, 0x00000010U);
- psu_mask_write(0xFD409978, 0x00000010U, 0x00000010U);
- psu_mask_write(0xFD40D978, 0x00000010U, 0x00000010U);
-
- serdes_illcalib(0, 0, 3, 0, 4, 0, 4, 0);
- psu_mask_write(0xFD410010, 0x00000077U, 0x00000044U);
- psu_mask_write(0xFD410014, 0x00000007U, 0x00000003U);
- psu_mask_write(0xFD400CB4, 0x00000037U, 0x00000037U);
- psu_mask_write(0xFD404CB4, 0x00000037U, 0x00000037U);
- psu_mask_write(0xFD4001D8, 0x00000001U, 0x00000001U);
- psu_mask_write(0xFD4041D8, 0x00000001U, 0x00000001U);
- psu_mask_write(0xFD404CC0, 0x0000001FU, 0x00000000U);
- psu_mask_write(0xFD400CC0, 0x0000001FU, 0x00000000U);
- psu_mask_write(0xFD404048, 0x000000FFU, 0x00000000U);
- psu_mask_write(0xFD400048, 0x000000FFU, 0x00000000U);
-
- return 1;
-}
-
-static unsigned long psu_resetout_init_data(void)
-{
- psu_mask_write(0xFF5E023C, 0x00000400U, 0x00000000U);
- psu_mask_write(0xFF9D0080, 0x00000001U, 0x00000001U);
- psu_mask_write(0xFF9D007C, 0x00000001U, 0x00000000U);
- psu_mask_write(0xFF5E023C, 0x00000140U, 0x00000000U);
- psu_mask_write(0xFF5E0230, 0x00000008U, 0x00000000U);
- psu_mask_write(0xFD1A0100, 0x00010000U, 0x00000000U);
- psu_mask_write(0xFD4A0200, 0x00000002U, 0x00000000U);
- psu_mask_write(0xFD4A0238, 0x0000000FU, 0x00000000U);
- psu_mask_write(0xFE20C200, 0x00023FFFU, 0x00022457U);
- psu_mask_write(0xFE20C630, 0x003FFF00U, 0x00000000U);
- psu_mask_write(0xFE20C11C, 0x00000600U, 0x00000600U);
- psu_mask_write(0xFE20C12C, 0x00004000U, 0x00004000U);
- psu_mask_write(0xFD480064, 0x00000200U, 0x00000200U);
- mask_poll(0xFD4063E4, 0x00000010U);
- mask_poll(0xFD40A3E4, 0x00000010U);
-
- return 1;
-}
-
-static unsigned long psu_resetin_init_data(void)
-{
- psu_mask_write(0xFF5E023C, 0x00000540U, 0x00000540U);
- psu_mask_write(0xFF5E0230, 0x00000008U, 0x00000008U);
- psu_mask_write(0xFD4A0238, 0x0000000FU, 0x0000000AU);
- psu_mask_write(0xFD4A0200, 0x00000002U, 0x00000002U);
- psu_mask_write(0xFD1A0100, 0x00010000U, 0x00010000U);
-
- return 1;
-}
-
static unsigned long psu_afi_config(void)
{
psu_mask_write(0xFD1A0100, 0x00001F80U, 0x00000000U);
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_BOARD=y
-CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm016-dc2 zynqmp-zc1751-xm017-dc3 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.1 zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu106-rev1.0 zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu1285-revA zynqmp-zcu208-revA zynqmp-zcu216-revA zynqmp-topic-miamimp-xilinx-xdp-v1r1 zynqmp-sm-k26-revA zynqmp-smk-k26-revA zynqmp-dlc21-revA"
+CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-e-a2197-00-revB zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm016-dc2 zynqmp-zc1751-xm017-dc3 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.1 zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu106-rev1.0 zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu1285-revA zynqmp-zcu208-revA zynqmp-zcu216-revA zynqmp-topic-miamimp-xilinx-xdp-v1r1 zynqmp-sm-k26-revA zynqmp-smk-k26-revA zynqmp-dlc21-revA"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent interrupts iommus power-domains"
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_FAT=y
static const struct udevice_id versal_clk_ids[] = {
{ .compatible = "xlnx,versal-clk" },
- { .compatible = "xlnx,versal-net-clk" },
{ }
};
/*
* (C) Copyright 2015 - 2016, Xilinx, Inc,
* Michal Simek <michal.simek@amd.com>
- * Siva Durga Prasad <siva.durga.prasad.paladugu@amd.com>>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
*/
#include <console.h>
static int xilinxphy_of_init(struct phy_device *phydev)
{
- u32 phytype;
ofnode node;
debug("%s\n", __func__);
if (!ofnode_valid(node))
return -EINVAL;
- phytype = ofnode_read_u32_default(node, "xlnx,phy-type", -1);
- if (phytype == XAE_PHY_TYPE_1000BASE_X)
- phydev->flags |= XAE_PHY_TYPE_1000BASE_X;
-
return 0;
}
return 0;
}
+static u32 gem_mdc_clk_div(struct zynq_gem_priv *priv)
+{
+ u32 config;
+ unsigned long pclk_hz;
+
+ pclk_hz = clk_get_rate(&priv->pclk);
+ if (pclk_hz <= 20000000)
+ config = GEM_MDC_SET(GEM_CLK_DIV8);
+ else if (pclk_hz <= 40000000)
+ config = GEM_MDC_SET(GEM_CLK_DIV16);
+ else if (pclk_hz <= 80000000)
+ config = GEM_MDC_SET(GEM_CLK_DIV32);
+ else if (pclk_hz <= 120000000)
+ config = GEM_MDC_SET(GEM_CLK_DIV48);
+ else if (pclk_hz <= 160000000)
+ config = GEM_MDC_SET(GEM_CLK_DIV64);
+ else if (pclk_hz <= 240000000)
+ config = GEM_MDC_SET(GEM_CLK_DIV96);
+ else if (pclk_hz <= 320000000)
+ config = GEM_MDC_SET(GEM_CLK_DIV128);
+ else
+ config = GEM_MDC_SET(GEM_CLK_DIV224);
+
+ return config;
+}
+
static int zynq_phy_init(struct udevice *dev)
{
- int ret;
+ int ret, val;
struct zynq_gem_priv *priv = dev_get_priv(dev);
struct zynq_gem_regs *regs_mdio = priv->mdiobase;
+ struct zynq_gem_regs *regs = priv->iobase;
const u32 supported = SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full;
+ val = gem_mdc_clk_div(priv);
+ if (val)
+ writel(val, ®s->nwcfg);
+
/* Enable only MDIO bus */
writel(ZYNQ_GEM_NWCTRL_MDEN_MASK, ®s_mdio->nwctrl);
return phy_config(priv->phydev);
}
-static u32 gem_mdc_clk_div(struct zynq_gem_priv *priv)
-{
- u32 config;
- unsigned long pclk_hz;
-
- pclk_hz = clk_get_rate(&priv->pclk);
- if (pclk_hz <= 20000000)
- config = GEM_MDC_SET(GEM_CLK_DIV8);
- else if (pclk_hz <= 40000000)
- config = GEM_MDC_SET(GEM_CLK_DIV16);
- else if (pclk_hz <= 80000000)
- config = GEM_MDC_SET(GEM_CLK_DIV32);
- else if (pclk_hz <= 120000000)
- config = GEM_MDC_SET(GEM_CLK_DIV48);
- else if (pclk_hz <= 160000000)
- config = GEM_MDC_SET(GEM_CLK_DIV64);
- else if (pclk_hz <= 240000000)
- config = GEM_MDC_SET(GEM_CLK_DIV96);
- else if (pclk_hz <= 320000000)
- config = GEM_MDC_SET(GEM_CLK_DIV128);
- else
- config = GEM_MDC_SET(GEM_CLK_DIV224);
-
- return config;
-}
static int zynq_gem_init(struct udevice *dev)
{
- u32 i, nwconfig;
+ u32 i, nwconfig, nwcfg;
int ret;
unsigned long clk_rate = 0;
struct zynq_gem_priv *priv = dev_get_priv(dev);
return -1;
}
- nwconfig = gem_mdc_clk_div(priv);
- nwconfig |= ZYNQ_GEM_NWCFG_INIT;
+ nwconfig = ZYNQ_GEM_NWCFG_INIT;
/*
* Set SGMII enable PCS selection only if internal PCS/PMA
switch (priv->phydev->speed) {
case SPEED_1000:
- writel(nwconfig | ZYNQ_GEM_NWCFG_SPEED1000,
- ®s->nwcfg);
+ nwconfig |= ZYNQ_GEM_NWCFG_SPEED1000;
clk_rate = ZYNQ_GEM_FREQUENCY_1000;
break;
case SPEED_100:
- writel(nwconfig | ZYNQ_GEM_NWCFG_SPEED100,
- ®s->nwcfg);
+ nwconfig |= ZYNQ_GEM_NWCFG_SPEED100;
clk_rate = ZYNQ_GEM_FREQUENCY_100;
break;
case SPEED_10:
clk_rate = ZYNQ_GEM_FREQUENCY_10;
break;
}
+ nwcfg = readl(®s->nwcfg);
+ nwcfg |= nwconfig;
+ if (nwcfg)
+ writel(nwcfg, ®s->nwcfg);
#ifdef CONFIG_ARM64
if (priv->interface == PHY_INTERFACE_MODE_SGMII &&
&pinmux.drive_strength);
zynqmp_pm_pinctrl_get_config(selector, PM_PINCTRL_CONFIG_VOLTAGE_STATUS,
&pinmux.volt_sts);
+ zynqmp_pm_pinctrl_get_config(selector, PM_PINCTRL_CONFIG_TRI_STATE,
+ &pinmux.tri_state);
switch (pinmux.drive_strength) {
case PM_PINCTRL_DRIVE_STRENGTH_2MA:
return -EINVAL;
}
- snprintf(buf, size, "slew:%s\tbias:%s\tpull:%s\tinput:%s\tdrive:%dmA\tvolt:%s",
+ snprintf(buf, size,
+ "slew:%s\tbias:%s\tpull:%s\tinput:%s\tdrive:%dmA\tvolt:%s\ttri_state:%s",
pinmux.slew ? "slow" : "fast",
pinmux.bias ? "enabled" : "disabled",
pinmux.pull_ctrl ? "up" : "down",
pinmux.input_type ? "schmitt" : "cmos",
pinmux.drive_strength,
- pinmux.volt_sts ? "1.8" : "3.3");
+ pinmux.volt_sts ? "1.8" : "3.3",
+ pinmux.tri_state ? "enabled" : "disabled");
return 0;
}
#define __PINCTRL_H
#define PINNAME_SIZE 10
-#define PINMUX_SIZE 80
+#define PINMUX_SIZE 90
/**
* struct pinconf_param - pin config parameters
import pytest
import u_boot_utils
+import uuid
"""
Note: This test relies on boardenv_* containing configuration values to define
'crc32': 'c2244b26',
}
+# Details regarding a file that may be read from a TFTP server. This variable
+# may be omitted or set to None if PXE testing is not possible or desired.
+env__net_pxe_readable_file = {
+ 'fn': 'default',
+ 'addr': 0x2000000,
+ 'size': 74,
+ 'timeout': 50000,
+ 'pattern': 'Linux',
+}
+
# True if a router advertisement service is connected to the network, and should
# be tested. If router advertisement testing is not possible or desired, this
variable may be omitted or set to False.
output = u_boot_console.run_command('crc32 %x $filesize' % addr)
assert expected_crc in output
+
+@pytest.mark.buildconfigspec("cmd_net")
+@pytest.mark.buildconfigspec("cmd_pxe")
+def test_net_pxe_get(u_boot_console):
+ """Test the pxe get command.
+
+ A pxe configuration file is downloaded from the TFTP server and interpreted
+ to boot the images mentioned in pxe configuration file.
+
+ The details of the file to download are provided by the boardenv_* file;
+ see the comment at the beginning of this file.
+ """
+
+ if not net_set_up:
+ pytest.skip("Network not initialized")
+
+ test_net_setup_static(u_boot_console)
+
+ f = u_boot_console.config.env.get("env__net_pxe_readable_file", None)
+ if not f:
+ pytest.skip("No PXE readable file to read")
+
+ addr = f.get("addr", None)
+ timeout = f.get("timeout", u_boot_console.p.timeout)
+
+ pxeuuid = uuid.uuid1()
+ u_boot_console.run_command(f"setenv pxeuuid {pxeuuid}")
+ expected_text_uuid = f"Retrieving file: pxelinux.cfg/{pxeuuid}"
+
+ ethaddr = u_boot_console.run_command("echo $ethaddr")
+ ethaddr = ethaddr.replace(':', '-')
+ expected_text_ethaddr = f"Retrieving file: pxelinux.cfg/01-{ethaddr}"
+
+ ip = u_boot_console.run_command("echo $ipaddr")
+ ip = ip.split('.')
+ ipaddr_file = "".join(['%02x' % int(x) for x in ip]).upper()
+ expected_text_ipaddr = f"Retrieving file: pxelinux.cfg/{ipaddr_file}"
+ expected_text_default = f"Retrieving file: pxelinux.cfg/default"
+
+ with u_boot_console.temporary_timeout(timeout):
+ output = u_boot_console.run_command("pxe get")
+
+ assert "TIMEOUT" not in output
+ assert expected_text_uuid in output
+ assert expected_text_ethaddr in output
+ assert expected_text_ipaddr in output
+
+ i = 1
+ for i in range(0, len(ipaddr_file) - 1):
+ expected_text_ip = f"Retrieving file: pxelinux.cfg/{ipaddr_file[:-i]}"
+ assert expected_text_ip in output
+ i += 1
+
+ assert expected_text_default in output
+ assert "Config file 'default.boot' found" in output
projects / thirdparty / u-boot.git / commitdiff
